// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;
import {Ownable} from "solady/src/auth/Ownable.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC20Router} from "../src/types/interfaces/IERC20Router.sol";
contract ApprovalProxy is Ownable {
    using SafeERC20 for IERC20;
    error ArrayLengthsMismatch();
    error ERC20TransferFromFailed();
    error NativeTransferFailed();
    event RouterUpdated(address newRouter);
    address public router;
    receive() external payable {}
    constructor(address _owner, address _router) {
        _initializeOwner(_owner);
        router = _router;
    }
    /// @notice Withdraw function in case funds get stuck in contract
    function withdraw() external onlyOwner {
        _send(msg.sender, address(this).balance);
    }
    /// @notice Set the router address
    /// @param _router The address of the router contract
    function setRouter(address _router) external onlyOwner {
        router = _router;
        emit RouterUpdated(_router);
    }
    /// @notice Transfer tokens to ERC20Router and perform multicall in a single tx
    /// @dev This contract must be approved to transfer msg.sender's tokens to the ERC20Router
    /// @param tokens An array of token addresses to transfer
    /// @param amounts An array of token amounts to transfer
    /// @param targets An array of target addresses to pass to the multicall
    /// @param datas An array of calldata to pass to the multicall
    /// @param values An array of msg values to pass to the multicall
    /// @param refundTo The address to refund any leftover ETH to
    function transferAndMulticall(
        address[] calldata tokens,
        uint256[] calldata amounts,
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes memory) {
        // Revert if array lengths do not match
        if ((tokens.length != amounts.length)) {
            revert ArrayLengthsMismatch();
        }
        // Revert if array lengths do not match (split from above for readability)
        if (targets.length != datas.length || datas.length != values.length) {
            revert ArrayLengthsMismatch();
        }
        // Transfer the tokens to the router
        for (uint256 i = 0; i < tokens.length; i++) {
            IERC20(tokens[i]).safeTransferFrom(msg.sender, router, amounts[i]);
        }
        // Call delegatecallMulticall on the router. The router will perform a
        // delegatecall to the Multicaller.
        // @dev msg.sender for the calls to targets will be the router
        bytes memory data = IERC20Router(router).delegatecallMulticall{value: msg.value}(
            targets,
            datas,
            values,
            refundTo
        );
        return data;
    }
    function _send(address to, uint256 value) internal {
        bool success;
        assembly {
            // Save gas by avoiding copying the return data to memory.
            // Provide at most 100k gas to the internal call, which is
            // more than enough to cover common use-cases of logic for
            // receiving native tokens (eg. SCW payable fallbacks).
            success := call(100000, to, value, 0, 0, 0, 0)
        }
        if (!success) {
            revert NativeTransferFailed();
        }
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @notice Simple single owner authorization mixin.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/auth/Ownable.sol)
///
/// @dev Note:
/// This implementation does NOT auto-initialize the owner to `msg.sender`.
/// You MUST call the `_initializeOwner` in the constructor / initializer.
///
/// While the ownable portion follows
/// [EIP-173](https://eips.ethereum.org/EIPS/eip-173) for compatibility,
/// the nomenclature for the 2-step ownership handover may be unique to this codebase.
abstract contract Ownable {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev The caller is not authorized to call the function.
    error Unauthorized();
    /// @dev The `newOwner` cannot be the zero address.
    error NewOwnerIsZeroAddress();
    /// @dev The `pendingOwner` does not have a valid handover request.
    error NoHandoverRequest();
    /// @dev Cannot double-initialize.
    error AlreadyInitialized();
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev The ownership is transferred from `oldOwner` to `newOwner`.
    /// This event is intentionally kept the same as OpenZeppelin's Ownable to be
    /// compatible with indexers and [EIP-173](https://eips.ethereum.org/EIPS/eip-173),
    /// despite it not being as lightweight as a single argument event.
    event OwnershipTransferred(address indexed oldOwner, address indexed newOwner);
    /// @dev An ownership handover to `pendingOwner` has been requested.
    event OwnershipHandoverRequested(address indexed pendingOwner);
    /// @dev The ownership handover to `pendingOwner` has been canceled.
    event OwnershipHandoverCanceled(address indexed pendingOwner);
    /// @dev `keccak256(bytes("OwnershipTransferred(address,address)"))`.
    uint256 private constant _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE =
        0x8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0;
    /// @dev `keccak256(bytes("OwnershipHandoverRequested(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE =
        0xdbf36a107da19e49527a7176a1babf963b4b0ff8cde35ee35d6cd8f1f9ac7e1d;
    /// @dev `keccak256(bytes("OwnershipHandoverCanceled(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE =
        0xfa7b8eab7da67f412cc9575ed43464468f9bfbae89d1675917346ca6d8fe3c92;
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev The owner slot is given by:
    /// `bytes32(~uint256(uint32(bytes4(keccak256("_OWNER_SLOT_NOT")))))`.
    /// It is intentionally chosen to be a high value
    /// to avoid collision with lower slots.
    /// The choice of manual storage layout is to enable compatibility
    /// with both regular and upgradeable contracts.
    bytes32 internal constant _OWNER_SLOT =
        0xffffffffffffffffffffffffffffffffffffffffffffffffffffffff74873927;
    /// The ownership handover slot of `newOwner` is given by:
    /// ```
    ///     mstore(0x00, or(shl(96, user), _HANDOVER_SLOT_SEED))
    ///     let handoverSlot := keccak256(0x00, 0x20)
    /// ```
    /// It stores the expiry timestamp of the two-step ownership handover.
    uint256 private constant _HANDOVER_SLOT_SEED = 0x389a75e1;
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                     INTERNAL FUNCTIONS                     */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Override to return true to make `_initializeOwner` prevent double-initialization.
    function _guardInitializeOwner() internal pure virtual returns (bool guard) {}
    /// @dev Initializes the owner directly without authorization guard.
    /// This function must be called upon initialization,
    /// regardless of whether the contract is upgradeable or not.
    /// This is to enable generalization to both regular and upgradeable contracts,
    /// and to save gas in case the initial owner is not the caller.
    /// For performance reasons, this function will not check if there
    /// is an existing owner.
    function _initializeOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                if sload(ownerSlot) {
                    mstore(0x00, 0x0dc149f0) // `AlreadyInitialized()`.
                    revert(0x1c, 0x04)
                }
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(_OWNER_SLOT, newOwner)
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        }
    }
    /// @dev Sets the owner directly without authorization guard.
    function _setOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, newOwner)
            }
        }
    }
    /// @dev Throws if the sender is not the owner.
    function _checkOwner() internal view virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // If the caller is not the stored owner, revert.
            if iszero(eq(caller(), sload(_OWNER_SLOT))) {
                mstore(0x00, 0x82b42900) // `Unauthorized()`.
                revert(0x1c, 0x04)
            }
        }
    }
    /// @dev Returns how long a two-step ownership handover is valid for in seconds.
    /// Override to return a different value if needed.
    /// Made internal to conserve bytecode. Wrap it in a public function if needed.
    function _ownershipHandoverValidFor() internal view virtual returns (uint64) {
        return 48 * 3600;
    }
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  PUBLIC UPDATE FUNCTIONS                   */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Allows the owner to transfer the ownership to `newOwner`.
    function transferOwnership(address newOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(shl(96, newOwner)) {
                mstore(0x00, 0x7448fbae) // `NewOwnerIsZeroAddress()`.
                revert(0x1c, 0x04)
            }
        }
        _setOwner(newOwner);
    }
    /// @dev Allows the owner to renounce their ownership.
    function renounceOwnership() public payable virtual onlyOwner {
        _setOwner(address(0));
    }
    /// @dev Request a two-step ownership handover to the caller.
    /// The request will automatically expire in 48 hours (172800 seconds) by default.
    function requestOwnershipHandover() public payable virtual {
        unchecked {
            uint256 expires = block.timestamp + _ownershipHandoverValidFor();
            /// @solidity memory-safe-assembly
            assembly {
                // Compute and set the handover slot to `expires`.
                mstore(0x0c, _HANDOVER_SLOT_SEED)
                mstore(0x00, caller())
                sstore(keccak256(0x0c, 0x20), expires)
                // Emit the {OwnershipHandoverRequested} event.
                log2(0, 0, _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE, caller())
            }
        }
    }
    /// @dev Cancels the two-step ownership handover to the caller, if any.
    function cancelOwnershipHandover() public payable virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, caller())
            sstore(keccak256(0x0c, 0x20), 0)
            // Emit the {OwnershipHandoverCanceled} event.
            log2(0, 0, _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE, caller())
        }
    }
    /// @dev Allows the owner to complete the two-step ownership handover to `pendingOwner`.
    /// Reverts if there is no existing ownership handover requested by `pendingOwner`.
    function completeOwnershipHandover(address pendingOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            let handoverSlot := keccak256(0x0c, 0x20)
            // If the handover does not exist, or has expired.
            if gt(timestamp(), sload(handoverSlot)) {
                mstore(0x00, 0x6f5e8818) // `NoHandoverRequest()`.
                revert(0x1c, 0x04)
            }
            // Set the handover slot to 0.
            sstore(handoverSlot, 0)
        }
        _setOwner(pendingOwner);
    }
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                   PUBLIC READ FUNCTIONS                    */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Returns the owner of the contract.
    function owner() public view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            result := sload(_OWNER_SLOT)
        }
    }
    /// @dev Returns the expiry timestamp for the two-step ownership handover to `pendingOwner`.
    function ownershipHandoverExpiresAt(address pendingOwner)
        public
        view
        virtual
        returns (uint256 result)
    {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute the handover slot.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            // Load the handover slot.
            result := sload(keccak256(0x0c, 0x20))
        }
    }
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         MODIFIERS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Marks a function as only callable by the owner.
    modifier onlyOwner() virtual {
        _checkOwner();
        _;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);
    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }
    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }
    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }
    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }
    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.
        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;
import {ISignatureTransfer} from "permit2-relay/src/interfaces/ISignatureTransfer.sol";
interface IERC20Router {
    function permitMulticall(
        address user,
        ISignatureTransfer.PermitBatchTransferFrom memory permit,
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo,
        bytes memory permitSignature
    ) external payable returns (bytes memory);
    function delegatecallMulticall(
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes memory);
    function cleanupERC20(address token, address refundTo) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);
    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }
    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IEIP712} from "./IEIP712.sol";
/// @title SignatureTransfer
/// @notice Handles ERC20 token transfers through signature based actions
/// @dev Requires user's token approval on the Permit2 contract
interface ISignatureTransfer is IEIP712 {
    /// @notice Thrown when the requested amount for a transfer is larger than the permissioned amount
    /// @param maxAmount The maximum amount a spender can request to transfer
    error InvalidAmount(uint256 maxAmount);
    /// @notice Thrown when the number of tokens permissioned to a spender does not match the number of tokens being transferred
    /// @dev If the spender does not need to transfer the number of tokens permitted, the spender can request amount 0 to be transferred
    error LengthMismatch();
    /// @notice Emits an event when the owner successfully invalidates an unordered nonce.
    event UnorderedNonceInvalidation(address indexed owner, uint256 word, uint256 mask);
    /// @notice The token and amount details for a transfer signed in the permit transfer signature
    struct TokenPermissions {
        // ERC20 token address
        address token;
        // the maximum amount that can be spent
        uint256 amount;
    }
    /// @notice The signed permit message for a single token transfer
    struct PermitTransferFrom {
        TokenPermissions permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }
    /// @notice Specifies the recipient address and amount for batched transfers.
    /// @dev Recipients and amounts correspond to the index of the signed token permissions array.
    /// @dev Reverts if the requested amount is greater than the permitted signed amount.
    struct SignatureTransferDetails {
        // recipient address
        address to;
        // spender requested amount
        uint256 requestedAmount;
    }
    /// @notice Used to reconstruct the signed permit message for multiple token transfers
    /// @dev Do not need to pass in spender address as it is required that it is msg.sender
    /// @dev Note that a user still signs over a spender address
    struct PermitBatchTransferFrom {
        // the tokens and corresponding amounts permitted for a transfer
        TokenPermissions[] permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }
    /// @notice A map from token owner address and a caller specified word index to a bitmap. Used to set bits in the bitmap to prevent against signature replay protection
    /// @dev Uses unordered nonces so that permit messages do not need to be spent in a certain order
    /// @dev The mapping is indexed first by the token owner, then by an index specified in the nonce
    /// @dev It returns a uint256 bitmap
    /// @dev The index, or wordPosition is capped at type(uint248).max
    function nonceBitmap(address, uint256) external view returns (uint256);
    /// @notice Transfers a token using a signed permit message
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;
    /// @notice Transfers a token using a signed permit message
    /// @notice Includes extra data provided by the caller to verify signature over
    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param witness Extra data to include when checking the user signature
    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash
    /// @param signature The signature to verify
    function permitWitnessTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes32 witness,
        string calldata witnessTypeString,
        bytes calldata signature
    ) external;
    /// @notice Transfers multiple tokens using a signed permit message
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;
    /// @notice Transfers multiple tokens using a signed permit message
    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition
    /// @notice Includes extra data provided by the caller to verify signature over
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param witness Extra data to include when checking the user signature
    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash
    /// @param signature The signature to verify
    function permitWitnessTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes32 witness,
        string calldata witnessTypeString,
        bytes calldata signature
    ) external;
    /// @notice Invalidates the bits specified in mask for the bitmap at the word position
    /// @dev The wordPos is maxed at type(uint248).max
    /// @param wordPos A number to index the nonceBitmap at
    /// @param mask A bitmap masked against msg.sender's current bitmap at the word position
    function invalidateUnorderedNonces(uint256 wordPos, uint256 mask) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IEIP712 {
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

/**
 *Submitted for verification at BscScan.com on 2021-04-23
*/
/**
 *Submitted for verification at BscScan.com on 2021-04-22
*/
/**
 *Submitted for verification at BscScan.com on 2021-04-22
*/
/**
 *Submitted for verification at BscScan.com on 2020-09-19
*/
pragma solidity =0.5.16;
interface IPancakeFactory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);
    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);
    function createPair(address tokenA, address tokenB) external returns (address pair);
    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}
interface IPancakePair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);
    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);
    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);
    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);
    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);
    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;
    function initialize(address, address) external;
}
interface IPancakeERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);
    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);
    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);
    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
}
// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)
library SafeMath {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }
    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }
    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}
contract PancakeERC20 is IPancakeERC20 {
    using SafeMath for uint;
    string public constant name = 'Pancake LPs';
    string public constant symbol = 'Cake-LP';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;
    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);
    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }
    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }
    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }
    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }
    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }
    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }
    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }
    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'Pancake: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\\x19\\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'Pancake: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}
// a library for performing various math operations
library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }
    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}
// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))
// range: [0, 2**112 - 1]
// resolution: 1 / 2**112
library UQ112x112 {
    uint224 constant Q112 = 2**112;
    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }
    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}
interface IERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);
    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}
interface IPancakeCallee {
    function pancakeCall(address sender, uint amount0, uint amount1, bytes calldata data) external;
}
contract PancakePair is IPancakePair, PancakeERC20 {
    using SafeMath  for uint;
    using UQ112x112 for uint224;
    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));
    address public factory;
    address public token0;
    address public token1;
    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves
    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event
    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'Pancake: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }
    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }
    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'Pancake: TRANSFER_FAILED');
    }
    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);
    constructor() public {
        factory = msg.sender;
    }
    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'Pancake: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }
    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'Pancake: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }
    // if fee is on, mint liquidity equivalent to 8/25 of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IPancakeFactory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast)).mul(8);
                    uint denominator = rootK.mul(17).add(rootKLast.mul(8));
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }
    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20(token0).balanceOf(address(this));
        uint balance1 = IERC20(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);
        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
            _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'Pancake: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);
        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }
    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20(_token0).balanceOf(address(this));
        uint balance1 = IERC20(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];
        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'Pancake: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));
        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }
    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'Pancake: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'Pancake: INSUFFICIENT_LIQUIDITY');
        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
            address _token0 = token0;
            address _token1 = token1;
            require(to != _token0 && to != _token1, 'Pancake: INVALID_TO');
            if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
            if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
            if (data.length > 0) IPancakeCallee(to).pancakeCall(msg.sender, amount0Out, amount1Out, data);
            balance0 = IERC20(_token0).balanceOf(address(this));
            balance1 = IERC20(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'Pancake: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
            uint balance0Adjusted = (balance0.mul(10000).sub(amount0In.mul(25)));
            uint balance1Adjusted = (balance1.mul(10000).sub(amount1In.mul(25)));
            require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(10000**2), 'Pancake: K');
        }
        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }
    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20(_token1).balanceOf(address(this)).sub(reserve1));
    }
    // force reserves to match balances
    function sync() external lock {
        _update(IERC20(token0).balanceOf(address(this)), IERC20(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}
contract PancakeFactory is IPancakeFactory {
    bytes32 public constant INIT_CODE_PAIR_HASH = keccak256(abi.encodePacked(type(PancakePair).creationCode));
    address public feeTo;
    address public feeToSetter;
    mapping(address => mapping(address => address)) public getPair;
    address[] public allPairs;
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);
    constructor(address _feeToSetter) public {
        feeToSetter = _feeToSetter;
    }
    function allPairsLength() external view returns (uint) {
        return allPairs.length;
    }
    function createPair(address tokenA, address tokenB) external returns (address pair) {
        require(tokenA != tokenB, 'Pancake: IDENTICAL_ADDRESSES');
        (address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), 'Pancake: ZERO_ADDRESS');
        require(getPair[token0][token1] == address(0), 'Pancake: PAIR_EXISTS'); // single check is sufficient
        bytes memory bytecode = type(PancakePair).creationCode;
        bytes32 salt = keccak256(abi.encodePacked(token0, token1));
        assembly {
            pair := create2(0, add(bytecode, 32), mload(bytecode), salt)
        }
        IPancakePair(pair).initialize(token0, token1);
        getPair[token0][token1] = pair;
        getPair[token1][token0] = pair; // populate mapping in the reverse direction
        allPairs.push(pair);
        emit PairCreated(token0, token1, pair, allPairs.length);
    }
    function setFeeTo(address _feeTo) external {
        require(msg.sender == feeToSetter, 'Pancake: FORBIDDEN');
        feeTo = _feeTo;
    }
    function setFeeToSetter(address _feeToSetter) external {
        require(msg.sender == feeToSetter, 'Pancake: FORBIDDEN');
        feeToSetter = _feeToSetter;
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.25;
import {Ownable} from "solady/src/auth/Ownable.sol";
import {Tstorish} from "tstorish/src/Tstorish.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC721} from "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import {IERC1155} from "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IAllowanceTransfer} from "permit2-relay/src/interfaces/IAllowanceTransfer.sol";
import {ISignatureTransfer} from "permit2-relay/src/interfaces/ISignatureTransfer.sol";
import {IPermit2} from "permit2-relay/src/interfaces/IPermit2.sol";
import {RelayerWitness} from "./types/lib/RelayStructs.sol";
import {IMulticaller} from "./types/interfaces/IMulticaller.sol";
contract ERC20Router is Ownable, Tstorish {
    using SafeERC20 for IERC20;
    // --- Errors --- //
    /// @notice Revert if array lengths do not match
    error ArrayLengthsMismatch();
    /// @notice Revert if this contract is set as the recipient
    error InvalidRecipient(address recipient);
    /// @notice Revert if the target is invalid
    error InvalidTarget(address target);
    /// @notice Revert if the native transfer failed
    error NativeTransferFailed();
    /// @notice Revert if no recipient is set
    error NoRecipientSet();
    uint256 RECIPIENT_STORAGE_SLOT = uint256(keccak256("ERC20Router.recipient"));
    address constant ZORA_REWARDS_V1 =
        0x7777777F279eba3d3Ad8F4E708545291A6fDBA8B;
    IPermit2 private immutable PERMIT2;
    address private immutable MULTICALLER;
    string public constant _RELAYER_WITNESS_TYPE_STRING =
        "RelayerWitness witness)RelayerWitness(address relayer)TokenPermissions(address token,uint256 amount)";
    bytes32 public constant _EIP_712_RELAYER_WITNESS_TYPE_HASH =
        keccak256("RelayerWitness(address relayer)");
    constructor(address permit2, address multicaller, address owner) Tstorish() {
        // Set the address of the Permit2 contract
        PERMIT2 = IPermit2(permit2);
        // Set the address of the multicaller contract
        MULTICALLER = multicaller;
        // Set the owner that can withdraw funds stuck in the contract
        _initializeOwner(owner);
    }
    receive() external payable {}
    function withdraw() external onlyOwner {
        _send(msg.sender, address(this).balance);
    }
    /// @notice Pull user ERC20 tokens through a signed batch permit
    ///         and perform an arbitrary multicall. Pass in an empty
    ///         permitSignature to only perform the multicall.
    /// @dev msg.value will persist across all calls in the multicall
    /// @param user The address of the user
    /// @param permit The permit details
    /// @param targets The addresses of the contracts to call
    /// @param datas The calldata for each call
    /// @param values The value to send with each call
    /// @param refundTo The address to refund any leftover ETH to
    /// @param permitSignature The signature for the permit
    function permitMulticall(
        address user,
        ISignatureTransfer.PermitBatchTransferFrom memory permit,
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo,
        bytes memory permitSignature
    ) external payable returns (bytes memory) {
        // Revert if array lengths do not match
        if (targets.length != datas.length || datas.length != values.length) {
            revert ArrayLengthsMismatch();
        }
        if (permitSignature.length != 0) {
            // Use permit to transfer tokens from user to router
            _handlePermitBatch(user, permit, permitSignature);
        }
        // Perform the multicall and send leftover to refundTo
        bytes memory data = _delegatecallMulticall(
            targets,
            datas,
            values,
            refundTo
        );
        return data;
    }
    /// @notice Call the Multicaller with a delegatecall to set the ERC20Router as the
    ///         sender of the calls to the targets.
    /// @dev    If a multicall is expecting to mint ERC721s or ERC1155s, the recipient must be explicitly set
    ///         All calls to ERC721s and ERC1155s in the multicall will have the same recipient set in refundTo
    ///         If refundTo is address(this), be sure to transfer tokens out of the router as part of the multicall
    /// @param targets The addresses of the contracts to call
    /// @param datas The calldata for each call
    /// @param values The value to send with each call
    /// @param refundTo The address to send any leftover ETH and set as recipient of ERC721/ERC1155 mints
    function delegatecallMulticall(
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes memory) {
        // Revert if array lengths do not match
        if (targets.length != datas.length || datas.length != values.length) {
            revert ArrayLengthsMismatch();
        }
        // Set the recipient in storage
        _setRecipient(refundTo);
        // Perform the multicall
        bytes memory data = _delegatecallMulticall(
            targets,
            datas,
            values,
            refundTo
        );
        // Clear the recipient in storage
        _clearRecipient();
        return data;
    }
    /// @notice Send leftover ERC20 tokens to the refundTo address
    /// @dev Should be included in the multicall if the router is expecting to receive tokens
    /// @param token The address of the ERC20 token
    /// @param refundTo The address to refund the tokens to
    function cleanupERC20(address token, address refundTo) external {
        // Check the router's balance for the token
        uint256 balance = IERC20(token).balanceOf(address(this));
        // Transfer the token to the refundTo address
        if (balance > 0) {
            IERC20(token).safeTransfer(refundTo, balance);
        }
    }
    /// @notice Internal function to handle a permit batch transfer
    /// @param user The address of the user
    /// @param permit The permit details
    /// @param permitSignature The signature for the permit
    function _handlePermitBatch(
        address user,
        ISignatureTransfer.PermitBatchTransferFrom memory permit,
        bytes memory permitSignature
    ) internal {
        // Create the witness that should be signed over
        bytes32 witness = keccak256(
            abi.encode(_EIP_712_RELAYER_WITNESS_TYPE_HASH, msg.sender)
        );
        // Create the SignatureTransferDetails array
        ISignatureTransfer.SignatureTransferDetails[]
            memory signatureTransferDetails = new ISignatureTransfer.SignatureTransferDetails[](
                permit.permitted.length
            );
        for (uint256 i = 0; i < permit.permitted.length; i++) {
            uint256 amount = permit.permitted[i].amount;
            signatureTransferDetails[i] = ISignatureTransfer
                .SignatureTransferDetails({
                    to: address(this),
                    requestedAmount: amount
                });
        }
        // Use the SignatureTransferDetails and permit signature to transfer tokens to the router
        PERMIT2.permitWitnessTransferFrom(
            permit,
            signatureTransferDetails,
            // When using a permit signature, cannot deposit on behalf of someone else other than `user`
            user,
            witness,
            _RELAYER_WITNESS_TYPE_STRING,
            permitSignature
        );
    }
    /// @notice Internal function to set the recipient address for ERC721 or ERC1155 mint
    /// @dev If the chain does not support tstore, recipient will be saved in storage
    /// @param recipient The address of the recipient
    function _setRecipient(address recipient) internal {
        // Return early if the recipient is address(0) or address(1), which are special cases for the multicaller
        // If a multicall is expecting to mint ERC721s or ERC1155s, the recipient must be explicitly set
        if (recipient == address(0) || recipient == address(1)) {
            return;
        }
        // For safety, revert if the recipient is this contract
        // Tokens should either be minted directly to recipient, or transferred to recipient through the onReceived hooks
        if (recipient == address(this)) {
            revert InvalidRecipient(address(this));
        }
        // Set the recipient in storage
        _setTstorish(RECIPIENT_STORAGE_SLOT, uint256(uint160(recipient)));
    }
    /// @notice Internal function to get the recipient address for ERC721 or ERC1155 mint
    function _getRecipient() internal view returns (address) {
        // Get the recipient from storage
        return address(uint160(_getTstorish(RECIPIENT_STORAGE_SLOT)));
    }
    /// @notice Internal function to clear the recipient address for ERC721 or ERC1155 mint
    function _clearRecipient() internal {
        // Return if recipient hasn't been set
        if (_getRecipient() == address(0)) {
            return;
        }
        // Clear the recipient in storage
        _clearTstorish(RECIPIENT_STORAGE_SLOT);
    }
    /// @notice Internal function to delegatecall the Multicaller contract
    /// @param targets The addresses of the contracts to call
    /// @param datas The calldata for each call
    /// @param values The value to send with each call
    /// @param refundTo The address to send any leftover ETH and set as recipient of ERC721/ERC1155 mints
    function _delegatecallMulticall(
        address[] calldata targets,
        bytes[] calldata datas,
        uint256[] calldata values,
        address refundTo
    ) internal returns (bytes memory) {
        for (uint256 i = 0; i < targets.length; i++) {
            // Revert if the call fails
            if (targets[i] == ZORA_REWARDS_V1) {
                revert InvalidTarget(ZORA_REWARDS_V1);
            }
        }
        // Perform the multicall and refund to the user
        (bool success, bytes memory data) = MULTICALLER.delegatecall(
            abi.encodeWithSignature(
                "aggregate(address[],bytes[],uint256[],address)",
                targets,
                datas,
                values,
                refundTo
            )
        );
        if (!success) {
            assembly {
                let returnDataSize := mload(data)
                revert(add(data, 32), returnDataSize)
            }
        }
        return data;
    }
    function _send(address to, uint256 value) internal {
        bool success;
        assembly {
            // Save gas by avoiding copying the return data to memory.
            // Provide at most 100k gas to the internal call, which is
            // more than enough to cover common use-cases of logic for
            // receiving native tokens (eg. SCW payable fallbacks).
            success := call(100000, to, value, 0, 0, 0, 0)
        }
        if (!success) {
            revert NativeTransferFailed();
        }
    }
    function onERC721Received(
        address /*_operator*/,
        address /*_from*/,
        uint256 _tokenId,
        bytes calldata _data
    ) external returns (bytes4) {
        // Get the recipient from storage
        address recipient = _getRecipient();
        // Revert if no recipient is set
        // Note this means transferring NFTs to this contract via `safeTransferFrom` will revert,
        // unless the transfer is part of a multicall that sets the recipient in storage
        if (recipient == address(0)) {
            revert NoRecipientSet();
        }
        // Transfer the NFT to the recipient
        IERC721(msg.sender).safeTransferFrom(address(this), recipient, _tokenId, _data);
        return this.onERC721Received.selector;
    }
    function onERC1155Received(
        address /*_operator*/,
        address /*_from*/,
        uint256 _id,
        uint256 _value,
        bytes calldata _data
    ) external returns (bytes4) {
        // Get the recipient from storage
        address recipient = _getRecipient();
        // Revert if no recipient is set
        // Note this means transferring NFTs to this contract via `safeTransferFrom` will revert,
        // unless the transfer is part of a multicall that sets the recipient in storage
        if (recipient == address(0)) {
            revert NoRecipientSet();
        }
        // Transfer the tokens to the recipient
        IERC1155(msg.sender).safeTransferFrom(address(this), recipient, _id, _value, _data);
        return this.onERC1155Received.selector;
    }
    function onERC1155BatchReceived(
        address /*_operator*/,
        address /*_from*/,
        uint256[] calldata _ids,
        uint256[] calldata _values,
        bytes calldata _data
    ) external returns (bytes4) {
        // Get the recipient from storage
        address recipient = _getRecipient();
        // Revert if no recipient is set
        // Note this means transferring NFTs to this contract via `safeTransferFrom` will revert,
        // unless the transfer is part of a multicall that sets the recipient in storage
        if (recipient == address(0)) {
            revert NoRecipientSet();
        }
        // Transfer the tokens to the recipient
        IERC1155(msg.sender).safeBatchTransferFrom(address(this), recipient, _ids, _values, _data);
        return this.onERC1155BatchReceived.selector;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/// @notice Simple single owner authorization mixin.
/// @author Solady (https://github.com/vectorized/solady/blob/main/src/auth/Ownable.sol)
///
/// @dev Note:
/// This implementation does NOT auto-initialize the owner to `msg.sender`.
/// You MUST call the `_initializeOwner` in the constructor / initializer.
///
/// While the ownable portion follows
/// [EIP-173](https://eips.ethereum.org/EIPS/eip-173) for compatibility,
/// the nomenclature for the 2-step ownership handover may be unique to this codebase.
abstract contract Ownable {
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                       CUSTOM ERRORS                        */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev The caller is not authorized to call the function.
    error Unauthorized();
    /// @dev The `newOwner` cannot be the zero address.
    error NewOwnerIsZeroAddress();
    /// @dev The `pendingOwner` does not have a valid handover request.
    error NoHandoverRequest();
    /// @dev Cannot double-initialize.
    error AlreadyInitialized();
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                           EVENTS                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev The ownership is transferred from `oldOwner` to `newOwner`.
    /// This event is intentionally kept the same as OpenZeppelin's Ownable to be
    /// compatible with indexers and [EIP-173](https://eips.ethereum.org/EIPS/eip-173),
    /// despite it not being as lightweight as a single argument event.
    event OwnershipTransferred(address indexed oldOwner, address indexed newOwner);
    /// @dev An ownership handover to `pendingOwner` has been requested.
    event OwnershipHandoverRequested(address indexed pendingOwner);
    /// @dev The ownership handover to `pendingOwner` has been canceled.
    event OwnershipHandoverCanceled(address indexed pendingOwner);
    /// @dev `keccak256(bytes("OwnershipTransferred(address,address)"))`.
    uint256 private constant _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE =
        0x8be0079c531659141344cd1fd0a4f28419497f9722a3daafe3b4186f6b6457e0;
    /// @dev `keccak256(bytes("OwnershipHandoverRequested(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE =
        0xdbf36a107da19e49527a7176a1babf963b4b0ff8cde35ee35d6cd8f1f9ac7e1d;
    /// @dev `keccak256(bytes("OwnershipHandoverCanceled(address)"))`.
    uint256 private constant _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE =
        0xfa7b8eab7da67f412cc9575ed43464468f9bfbae89d1675917346ca6d8fe3c92;
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                          STORAGE                           */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev The owner slot is given by:
    /// `bytes32(~uint256(uint32(bytes4(keccak256("_OWNER_SLOT_NOT")))))`.
    /// It is intentionally chosen to be a high value
    /// to avoid collision with lower slots.
    /// The choice of manual storage layout is to enable compatibility
    /// with both regular and upgradeable contracts.
    bytes32 internal constant _OWNER_SLOT =
        0xffffffffffffffffffffffffffffffffffffffffffffffffffffffff74873927;
    /// The ownership handover slot of `newOwner` is given by:
    /// ```
    ///     mstore(0x00, or(shl(96, user), _HANDOVER_SLOT_SEED))
    ///     let handoverSlot := keccak256(0x00, 0x20)
    /// ```
    /// It stores the expiry timestamp of the two-step ownership handover.
    uint256 private constant _HANDOVER_SLOT_SEED = 0x389a75e1;
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                     INTERNAL FUNCTIONS                     */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Override to return true to make `_initializeOwner` prevent double-initialization.
    function _guardInitializeOwner() internal pure virtual returns (bool guard) {}
    /// @dev Initializes the owner directly without authorization guard.
    /// This function must be called upon initialization,
    /// regardless of whether the contract is upgradeable or not.
    /// This is to enable generalization to both regular and upgradeable contracts,
    /// and to save gas in case the initial owner is not the caller.
    /// For performance reasons, this function will not check if there
    /// is an existing owner.
    function _initializeOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                if sload(ownerSlot) {
                    mstore(0x00, 0x0dc149f0) // `AlreadyInitialized()`.
                    revert(0x1c, 0x04)
                }
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Store the new value.
                sstore(_OWNER_SLOT, newOwner)
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, 0, newOwner)
            }
        }
    }
    /// @dev Sets the owner directly without authorization guard.
    function _setOwner(address newOwner) internal virtual {
        if (_guardInitializeOwner()) {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, or(newOwner, shl(255, iszero(newOwner))))
            }
        } else {
            /// @solidity memory-safe-assembly
            assembly {
                let ownerSlot := _OWNER_SLOT
                // Clean the upper 96 bits.
                newOwner := shr(96, shl(96, newOwner))
                // Emit the {OwnershipTransferred} event.
                log3(0, 0, _OWNERSHIP_TRANSFERRED_EVENT_SIGNATURE, sload(ownerSlot), newOwner)
                // Store the new value.
                sstore(ownerSlot, newOwner)
            }
        }
    }
    /// @dev Throws if the sender is not the owner.
    function _checkOwner() internal view virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // If the caller is not the stored owner, revert.
            if iszero(eq(caller(), sload(_OWNER_SLOT))) {
                mstore(0x00, 0x82b42900) // `Unauthorized()`.
                revert(0x1c, 0x04)
            }
        }
    }
    /// @dev Returns how long a two-step ownership handover is valid for in seconds.
    /// Override to return a different value if needed.
    /// Made internal to conserve bytecode. Wrap it in a public function if needed.
    function _ownershipHandoverValidFor() internal view virtual returns (uint64) {
        return 48 * 3600;
    }
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                  PUBLIC UPDATE FUNCTIONS                   */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Allows the owner to transfer the ownership to `newOwner`.
    function transferOwnership(address newOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            if iszero(shl(96, newOwner)) {
                mstore(0x00, 0x7448fbae) // `NewOwnerIsZeroAddress()`.
                revert(0x1c, 0x04)
            }
        }
        _setOwner(newOwner);
    }
    /// @dev Allows the owner to renounce their ownership.
    function renounceOwnership() public payable virtual onlyOwner {
        _setOwner(address(0));
    }
    /// @dev Request a two-step ownership handover to the caller.
    /// The request will automatically expire in 48 hours (172800 seconds) by default.
    function requestOwnershipHandover() public payable virtual {
        unchecked {
            uint256 expires = block.timestamp + _ownershipHandoverValidFor();
            /// @solidity memory-safe-assembly
            assembly {
                // Compute and set the handover slot to `expires`.
                mstore(0x0c, _HANDOVER_SLOT_SEED)
                mstore(0x00, caller())
                sstore(keccak256(0x0c, 0x20), expires)
                // Emit the {OwnershipHandoverRequested} event.
                log2(0, 0, _OWNERSHIP_HANDOVER_REQUESTED_EVENT_SIGNATURE, caller())
            }
        }
    }
    /// @dev Cancels the two-step ownership handover to the caller, if any.
    function cancelOwnershipHandover() public payable virtual {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, caller())
            sstore(keccak256(0x0c, 0x20), 0)
            // Emit the {OwnershipHandoverCanceled} event.
            log2(0, 0, _OWNERSHIP_HANDOVER_CANCELED_EVENT_SIGNATURE, caller())
        }
    }
    /// @dev Allows the owner to complete the two-step ownership handover to `pendingOwner`.
    /// Reverts if there is no existing ownership handover requested by `pendingOwner`.
    function completeOwnershipHandover(address pendingOwner) public payable virtual onlyOwner {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute and set the handover slot to 0.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            let handoverSlot := keccak256(0x0c, 0x20)
            // If the handover does not exist, or has expired.
            if gt(timestamp(), sload(handoverSlot)) {
                mstore(0x00, 0x6f5e8818) // `NoHandoverRequest()`.
                revert(0x1c, 0x04)
            }
            // Set the handover slot to 0.
            sstore(handoverSlot, 0)
        }
        _setOwner(pendingOwner);
    }
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                   PUBLIC READ FUNCTIONS                    */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Returns the owner of the contract.
    function owner() public view virtual returns (address result) {
        /// @solidity memory-safe-assembly
        assembly {
            result := sload(_OWNER_SLOT)
        }
    }
    /// @dev Returns the expiry timestamp for the two-step ownership handover to `pendingOwner`.
    function ownershipHandoverExpiresAt(address pendingOwner)
        public
        view
        virtual
        returns (uint256 result)
    {
        /// @solidity memory-safe-assembly
        assembly {
            // Compute the handover slot.
            mstore(0x0c, _HANDOVER_SLOT_SEED)
            mstore(0x00, pendingOwner)
            // Load the handover slot.
            result := sload(keccak256(0x0c, 0x20))
        }
    }
    /*´:°•.°+.*•´.*:˚.°*.˚•´.°:°•.°•.*•´.*:˚.°*.˚•´.°:°•.°+.*•´.*:*/
    /*                         MODIFIERS                          */
    /*.•°:°.´+˚.*°.˚:*.´•*.+°.•°:´*.´•*.•°.•°:°.´:•˚°.*°.˚:*.´+°.•*/
    /// @dev Marks a function as only callable by the owner.
    modifier onlyOwner() virtual {
        _checkOwner();
        _;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.24;
contract Tstorish {
    // Declare a storage variable indicating if TSTORE support has been
    // activated post-deployment.
    bool private _tstoreSupport;
    /*
     * ------------------------------------------------------------------------+
     * Opcode      | Mnemonic         | Stack              | Memory            |
     * ------------------------------------------------------------------------|
     * 60 0x02     | PUSH1 0x02       | 0x02               |                   |
     * 60 0x1e     | PUSH1 0x1e       | 0x1e 0x02          |                   |
     * 61 0x3d5c   | PUSH2 0x3d5c     | 0x3d5c 0x1e 0x02   |                   |
     * 3d          | RETURNDATASIZE   | 0 0x3d5c 0x1e 0x02 |                   |
     *                                                                         |
     * :: store deployed bytecode in memory: (3d) RETURNDATASIZE (5c) TLOAD :: |
     * 52          | MSTORE           | 0x1e 0x02          | [0..0x20): 0x3d5c |
     * f3          | RETURN           |                    | [0..0x20): 0x3d5c |
     * ------------------------------------------------------------------------+
     */
    uint256 constant _TLOAD_TEST_PAYLOAD = 0x6002_601e_613d5c_3d_52_f3;
    uint256 constant _TLOAD_TEST_PAYLOAD_LENGTH = 0x0a;
    uint256 constant _TLOAD_TEST_PAYLOAD_OFFSET = 0x16;
    // Declare an immutable variable to store the tstore test contract address.
    address private immutable _tloadTestContract;
    // Declare an immutable variable to store the initial TSTORE support status.
    bool private immutable _tstoreInitialSupport;
    // Declare an immutable function type variable for the _setTstorish function
    // based on chain support for tstore at time of deployment.
    function(uint256,uint256) internal immutable _setTstorish;
    // Declare an immutable function type variable for the _getTstorish function
    // based on chain support for tstore at time of deployment.
    function(uint256) view returns (uint256) internal immutable _getTstorish;
    // Declare an immutable function type variable for the _clearTstorish function
    // based on chain support for tstore at time of deployment.
    function(uint256) internal immutable _clearTstorish;
    // Declare a few custom revert error types.
    error TStoreAlreadyActivated();
    error TStoreNotSupported();
    error TloadTestContractDeploymentFailed();
    error OnlyDirectCalls();
    /**
     * @dev Determine TSTORE availability during deployment. This involves
     *      attempting to deploy a contract that utilizes TLOAD as part of the
     *      contract construction bytecode, and configuring initial support for
     *      using TSTORE in place of SSTORE based on the result.
     */
    constructor() {
        // Deploy the contract testing TLOAD support and store the address.
        address tloadTestContract = _prepareTloadTest();
        // Ensure the deployment was successful.
        if (tloadTestContract == address(0)) {
            revert TloadTestContractDeploymentFailed();
        }
        // Determine if TSTORE is supported.
        bool tstoreInitialSupport = _testTload(tloadTestContract);
        if (tstoreInitialSupport) {
            // If TSTORE is supported, set functions to their versions that use
            // tstore/tload directly without support checks.
            _setTstorish = _setTstore;
            _getTstorish = _getTstore;
            _clearTstorish = _clearTstore;
        } else {
            // If TSTORE is not supported, set functions to their versions that 
            // fallback to sstore/sload until _tstoreSupport is true.
            _setTstorish = _setTstorishWithSstoreFallback;
            _getTstorish = _getTstorishWithSloadFallback;
            _clearTstorish = _clearTstorishWithSstoreFallback;
        }
        _tstoreInitialSupport = tstoreInitialSupport;
        // Set the address of the deployed TLOAD test contract as an immutable.
        _tloadTestContract = tloadTestContract;
    }
    /**
     * @dev External function to activate TSTORE usage. Does not need to be
     *      called if TSTORE is supported from deployment, and only needs to be
     *      called once. Reverts if TSTORE has already been activated or if the
     *      opcode is not available. Note that this must be called directly from
     *      an externally-owned account to avoid potential reentrancy issues.
     */
    function __activateTstore() external {
        // Ensure this function is triggered from an externally-owned account.
        if (msg.sender != tx.origin) {
            revert OnlyDirectCalls();
        }
        // Determine if TSTORE can potentially be activated.
        if (_tstoreInitialSupport || _tstoreSupport) {
            revert TStoreAlreadyActivated();
        }
        // Determine if TSTORE can be activated and revert if not.
        if (!_testTload(_tloadTestContract)) {
            revert TStoreNotSupported();
        }
        // Mark TSTORE as activated.
        _tstoreSupport = true;
    }
    /**
     * @dev Private function to set a TSTORISH value. Assigned to _setTstorish 
     *      internal function variable at construction if chain has tstore support.
     *
     * @param storageSlot The slot to write the TSTORISH value to.
     * @param value       The value to write to the given storage slot.
     */
    function _setTstore(uint256 storageSlot, uint256 value) private {
        assembly {
            tstore(storageSlot, value)
        }
    }
    /**
     * @dev Private function to set a TSTORISH value with sstore fallback. 
     *      Assigned to _setTstorish internal function variable at construction
     *      if chain does not have tstore support.
     *
     * @param storageSlot The slot to write the TSTORISH value to.
     * @param value       The value to write to the given storage slot.
     */
    function _setTstorishWithSstoreFallback(uint256 storageSlot, uint256 value) private {
        if (_tstoreSupport) {
            assembly {
                tstore(storageSlot, value)
            }
        } else {
            assembly {
                sstore(storageSlot, value)
            }
        }
    }
    /**
     * @dev Private function to read a TSTORISH value. Assigned to _getTstorish
     *      internal function variable at construction if chain has tstore support.
     *
     * @param storageSlot The slot to read the TSTORISH value from.
     *
     * @return value The TSTORISH value at the given storage slot.
     */
    function _getTstore(
        uint256 storageSlot
    ) private view returns (uint256 value) {
        assembly {
            value := tload(storageSlot)
        }
    }
    /**
     * @dev Private function to read a TSTORISH value with sload fallback. 
     *      Assigned to _getTstorish internal function variable at construction
     *      if chain does not have tstore support.
     *
     * @param storageSlot The slot to read the TSTORISH value from.
     *
     * @return value The TSTORISH value at the given storage slot.
     */
    function _getTstorishWithSloadFallback(
        uint256 storageSlot
    ) private view returns (uint256 value) {
        if (_tstoreSupport) {
            assembly {
                value := tload(storageSlot)
            }
        } else {
            assembly {
                value := sload(storageSlot)
            }
        }
    }
    /**
     * @dev Private function to clear a TSTORISH value. Assigned to _clearTstorish internal 
     *      function variable at construction if chain has tstore support.
     *
     * @param storageSlot The slot to clear the TSTORISH value for.
     */
    function _clearTstore(uint256 storageSlot) private {
        assembly {
            tstore(storageSlot, 0)
        }
    }
    /**
     * @dev Private function to clear a TSTORISH value with sstore fallback. 
     *      Assigned to _clearTstorish internal function variable at construction
     *      if chain does not have tstore support.
     *
     * @param storageSlot The slot to clear the TSTORISH value for.
     */
    function _clearTstorishWithSstoreFallback(uint256 storageSlot) private {
        if (_tstoreSupport) {
            assembly {
                tstore(storageSlot, 0)
            }
        } else {
            assembly {
                sstore(storageSlot, 0)
            }
        }
    }
    /**
     * @dev Private function to deploy a test contract that utilizes TLOAD as
     *      part of its fallback logic.
     */
    function _prepareTloadTest() private returns (address contractAddress) {
        // Utilize assembly to deploy a contract testing TLOAD support.
        assembly {
            // Write the contract deployment code payload to scratch space.
            mstore(0, _TLOAD_TEST_PAYLOAD)
            // Deploy the contract.
            contractAddress := create(
                0,
                _TLOAD_TEST_PAYLOAD_OFFSET,
                _TLOAD_TEST_PAYLOAD_LENGTH
            )
        }
    }
    /**
     * @dev Private view function to determine if TSTORE/TLOAD are supported by
     *      the current EVM implementation by attempting to call the test
     *      contract, which utilizes TLOAD as part of its fallback logic.
     */
    function _testTload(
        address tloadTestContract
    ) private view returns (bool ok) {
        // Call the test contract, which will perform a TLOAD test. If the call
        // does not revert, then TLOAD/TSTORE is supported. Do not forward all
        // available gas, as all forwarded gas will be consumed on revert.
        (ok, ) = tloadTestContract.staticcall{ gas: gasleft() / 10 }("");
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);
    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or
     *   {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon
     *   a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;
    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;
    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;
    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the address zero.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;
    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);
    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.20;
import {IERC165} from "../../utils/introspection/IERC165.sol";
/**
 * @dev Required interface of an ERC1155 compliant contract, as defined in the
 * https://eips.ethereum.org/EIPS/eip-1155[EIP].
 */
interface IERC1155 is IERC165 {
    /**
     * @dev Emitted when `value` amount of tokens of type `id` are transferred from `from` to `to` by `operator`.
     */
    event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
    /**
     * @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
     * transfers.
     */
    event TransferBatch(
        address indexed operator,
        address indexed from,
        address indexed to,
        uint256[] ids,
        uint256[] values
    );
    /**
     * @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
     * `approved`.
     */
    event ApprovalForAll(address indexed account, address indexed operator, bool approved);
    /**
     * @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
     *
     * If an {URI} event was emitted for `id`, the standard
     * https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
     * returned by {IERC1155MetadataURI-uri}.
     */
    event URI(string value, uint256 indexed id);
    /**
     * @dev Returns the value of tokens of token type `id` owned by `account`.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function balanceOf(address account, uint256 id) external view returns (uint256);
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
     *
     * Requirements:
     *
     * - `accounts` and `ids` must have the same length.
     */
    function balanceOfBatch(
        address[] calldata accounts,
        uint256[] calldata ids
    ) external view returns (uint256[] memory);
    /**
     * @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
     *
     * Emits an {ApprovalForAll} event.
     *
     * Requirements:
     *
     * - `operator` cannot be the caller.
     */
    function setApprovalForAll(address operator, bool approved) external;
    /**
     * @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
     *
     * See {setApprovalForAll}.
     */
    function isApprovedForAll(address account, address operator) external view returns (bool);
    /**
     * @dev Transfers a `value` amount of tokens of type `id` from `from` to `to`.
     *
     * WARNING: This function can potentially allow a reentrancy attack when transferring tokens
     * to an untrusted contract, when invoking {onERC1155Received} on the receiver.
     * Ensure to follow the checks-effects-interactions pattern and consider employing
     * reentrancy guards when interacting with untrusted contracts.
     *
     * Emits a {TransferSingle} event.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
     * - `from` must have a balance of tokens of type `id` of at least `value` amount.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
     * acceptance magic value.
     */
    function safeTransferFrom(address from, address to, uint256 id, uint256 value, bytes calldata data) external;
    /**
     * @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
     *
     * WARNING: This function can potentially allow a reentrancy attack when transferring tokens
     * to an untrusted contract, when invoking {onERC1155BatchReceived} on the receiver.
     * Ensure to follow the checks-effects-interactions pattern and consider employing
     * reentrancy guards when interacting with untrusted contracts.
     *
     * Emits either a {TransferSingle} or a {TransferBatch} event, depending on the length of the array arguments.
     *
     * Requirements:
     *
     * - `ids` and `values` must have the same length.
     * - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
     * acceptance magic value.
     */
    function safeBatchTransferFrom(
        address from,
        address to,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);
    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);
    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }
    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }
    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }
    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }
    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));
        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.
        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IEIP712} from "./IEIP712.sol";
/// @title AllowanceTransfer
/// @notice Handles ERC20 token permissions through signature based allowance setting and ERC20 token transfers by checking allowed amounts
/// @dev Requires user's token approval on the Permit2 contract
interface IAllowanceTransfer is IEIP712 {
    /// @notice Thrown when an allowance on a token has expired.
    /// @param deadline The timestamp at which the allowed amount is no longer valid
    error AllowanceExpired(uint256 deadline);
    /// @notice Thrown when an allowance on a token has been depleted.
    /// @param amount The maximum amount allowed
    error InsufficientAllowance(uint256 amount);
    /// @notice Thrown when too many nonces are invalidated.
    error ExcessiveInvalidation();
    /// @notice Emits an event when the owner successfully invalidates an ordered nonce.
    event NonceInvalidation(
        address indexed owner, address indexed token, address indexed spender, uint48 newNonce, uint48 oldNonce
    );
    /// @notice Emits an event when the owner successfully sets permissions on a token for the spender.
    event Approval(
        address indexed owner, address indexed token, address indexed spender, uint160 amount, uint48 expiration
    );
    /// @notice Emits an event when the owner successfully sets permissions using a permit signature on a token for the spender.
    event Permit(
        address indexed owner,
        address indexed token,
        address indexed spender,
        uint160 amount,
        uint48 expiration,
        uint48 nonce
    );
    /// @notice Emits an event when the owner sets the allowance back to 0 with the lockdown function.
    event Lockdown(address indexed owner, address token, address spender);
    /// @notice The permit data for a token
    struct PermitDetails {
        // ERC20 token address
        address token;
        // the maximum amount allowed to spend
        uint160 amount;
        // timestamp at which a spender's token allowances become invalid
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    /// @notice The permit message signed for a single token allowance
    struct PermitSingle {
        // the permit data for a single token alownce
        PermitDetails details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }
    /// @notice The permit message signed for multiple token allowances
    struct PermitBatch {
        // the permit data for multiple token allowances
        PermitDetails[] details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }
    /// @notice The saved permissions
    /// @dev This info is saved per owner, per token, per spender and all signed over in the permit message
    /// @dev Setting amount to type(uint160).max sets an unlimited approval
    struct PackedAllowance {
        // amount allowed
        uint160 amount;
        // permission expiry
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    /// @notice A token spender pair.
    struct TokenSpenderPair {
        // the token the spender is approved
        address token;
        // the spender address
        address spender;
    }
    /// @notice Details for a token transfer.
    struct AllowanceTransferDetails {
        // the owner of the token
        address from;
        // the recipient of the token
        address to;
        // the amount of the token
        uint160 amount;
        // the token to be transferred
        address token;
    }
    /// @notice A mapping from owner address to token address to spender address to PackedAllowance struct, which contains details and conditions of the approval.
    /// @notice The mapping is indexed in the above order see: allowance[ownerAddress][tokenAddress][spenderAddress]
    /// @dev The packed slot holds the allowed amount, expiration at which the allowed amount is no longer valid, and current nonce thats updated on any signature based approvals.
    function allowance(address user, address token, address spender)
        external
        view
        returns (uint160 amount, uint48 expiration, uint48 nonce);
    /// @notice Approves the spender to use up to amount of the specified token up until the expiration
    /// @param token The token to approve
    /// @param spender The spender address to approve
    /// @param amount The approved amount of the token
    /// @param expiration The timestamp at which the approval is no longer valid
    /// @dev The packed allowance also holds a nonce, which will stay unchanged in approve
    /// @dev Setting amount to type(uint160).max sets an unlimited approval
    function approve(address token, address spender, uint160 amount, uint48 expiration) external;
    /// @notice Permit a spender to a given amount of the owners token via the owner's EIP-712 signature
    /// @dev May fail if the owner's nonce was invalidated in-flight by invalidateNonce
    /// @param owner The owner of the tokens being approved
    /// @param permitSingle Data signed over by the owner specifying the terms of approval
    /// @param signature The owner's signature over the permit data
    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;
    /// @notice Permit a spender to the signed amounts of the owners tokens via the owner's EIP-712 signature
    /// @dev May fail if the owner's nonce was invalidated in-flight by invalidateNonce
    /// @param owner The owner of the tokens being approved
    /// @param permitBatch Data signed over by the owner specifying the terms of approval
    /// @param signature The owner's signature over the permit data
    function permit(address owner, PermitBatch memory permitBatch, bytes calldata signature) external;
    /// @notice Transfer approved tokens from one address to another
    /// @param from The address to transfer from
    /// @param to The address of the recipient
    /// @param amount The amount of the token to transfer
    /// @param token The token address to transfer
    /// @dev Requires the from address to have approved at least the desired amount
    /// of tokens to msg.sender.
    function transferFrom(address from, address to, uint160 amount, address token) external;
    /// @notice Transfer approved tokens in a batch
    /// @param transferDetails Array of owners, recipients, amounts, and tokens for the transfers
    /// @dev Requires the from addresses to have approved at least the desired amount
    /// of tokens to msg.sender.
    function transferFrom(AllowanceTransferDetails[] calldata transferDetails) external;
    /// @notice Enables performing a "lockdown" of the sender's Permit2 identity
    /// by batch revoking approvals
    /// @param approvals Array of approvals to revoke.
    function lockdown(TokenSpenderPair[] calldata approvals) external;
    /// @notice Invalidate nonces for a given (token, spender) pair
    /// @param token The token to invalidate nonces for
    /// @param spender The spender to invalidate nonces for
    /// @param newNonce The new nonce to set. Invalidates all nonces less than it.
    /// @dev Can't invalidate more than 2**16 nonces per transaction.
    function invalidateNonces(address token, address spender, uint48 newNonce) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {IEIP712} from "./IEIP712.sol";
/// @title SignatureTransfer
/// @notice Handles ERC20 token transfers through signature based actions
/// @dev Requires user's token approval on the Permit2 contract
interface ISignatureTransfer is IEIP712 {
    /// @notice Thrown when the requested amount for a transfer is larger than the permissioned amount
    /// @param maxAmount The maximum amount a spender can request to transfer
    error InvalidAmount(uint256 maxAmount);
    /// @notice Thrown when the number of tokens permissioned to a spender does not match the number of tokens being transferred
    /// @dev If the spender does not need to transfer the number of tokens permitted, the spender can request amount 0 to be transferred
    error LengthMismatch();
    /// @notice Emits an event when the owner successfully invalidates an unordered nonce.
    event UnorderedNonceInvalidation(address indexed owner, uint256 word, uint256 mask);
    /// @notice The token and amount details for a transfer signed in the permit transfer signature
    struct TokenPermissions {
        // ERC20 token address
        address token;
        // the maximum amount that can be spent
        uint256 amount;
    }
    /// @notice The signed permit message for a single token transfer
    struct PermitTransferFrom {
        TokenPermissions permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }
    /// @notice Specifies the recipient address and amount for batched transfers.
    /// @dev Recipients and amounts correspond to the index of the signed token permissions array.
    /// @dev Reverts if the requested amount is greater than the permitted signed amount.
    struct SignatureTransferDetails {
        // recipient address
        address to;
        // spender requested amount
        uint256 requestedAmount;
    }
    /// @notice Used to reconstruct the signed permit message for multiple token transfers
    /// @dev Do not need to pass in spender address as it is required that it is msg.sender
    /// @dev Note that a user still signs over a spender address
    struct PermitBatchTransferFrom {
        // the tokens and corresponding amounts permitted for a transfer
        TokenPermissions[] permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }
    /// @notice A map from token owner address and a caller specified word index to a bitmap. Used to set bits in the bitmap to prevent against signature replay protection
    /// @dev Uses unordered nonces so that permit messages do not need to be spent in a certain order
    /// @dev The mapping is indexed first by the token owner, then by an index specified in the nonce
    /// @dev It returns a uint256 bitmap
    /// @dev The index, or wordPosition is capped at type(uint248).max
    function nonceBitmap(address, uint256) external view returns (uint256);
    /// @notice Transfers a token using a signed permit message
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;
    /// @notice Transfers a token using a signed permit message
    /// @notice Includes extra data provided by the caller to verify signature over
    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param witness Extra data to include when checking the user signature
    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash
    /// @param signature The signature to verify
    function permitWitnessTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes32 witness,
        string calldata witnessTypeString,
        bytes calldata signature
    ) external;
    /// @notice Transfers multiple tokens using a signed permit message
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;
    /// @notice Transfers multiple tokens using a signed permit message
    /// @dev The witness type string must follow EIP712 ordering of nested structs and must include the TokenPermissions type definition
    /// @notice Includes extra data provided by the caller to verify signature over
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails Specifies the recipient and requested amount for the token transfer
    /// @param witness Extra data to include when checking the user signature
    /// @param witnessTypeString The EIP-712 type definition for remaining string stub of the typehash
    /// @param signature The signature to verify
    function permitWitnessTransferFrom(
        PermitBatchTransferFrom memory permit,
        SignatureTransferDetails[] calldata transferDetails,
        address owner,
        bytes32 witness,
        string calldata witnessTypeString,
        bytes calldata signature
    ) external;
    /// @notice Invalidates the bits specified in mask for the bitmap at the word position
    /// @dev The wordPos is maxed at type(uint248).max
    /// @param wordPos A number to index the nonceBitmap at
    /// @param mask A bitmap masked against msg.sender's current bitmap at the word position
    function invalidateUnorderedNonces(uint256 wordPos, uint256 mask) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {ISignatureTransfer} from "./ISignatureTransfer.sol";
import {IAllowanceTransfer} from "./IAllowanceTransfer.sol";
/// @notice Permit2 handles signature-based transfers in SignatureTransfer and allowance-based transfers in AllowanceTransfer.
/// @dev Users must approve Permit2 before calling any of the transfer functions.
interface IPermit2 is ISignatureTransfer, IAllowanceTransfer {
// IPermit2 unifies the two interfaces so users have maximal flexibility with their approval.
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.23;
enum OrderStatus {
    NotInitiated,
    Initiated,
    Settled__FulfilledPrimary,
    Settled__FulfilledSecondary,
    Settled__Refund,
    Cancelled
}
enum Verdict {
    FulfilledPrimary,
    FulfilledSecondary,
    Refund
}
/// @notice A struct representing an input or output token transfer. These transfers must take place
///         on their respective chains in order for validators to sign the order.
/// @param token   The address of the token to transfer
/// @param from    The from address
/// @param to      The to address
/// @param amount  The amount to transfer
/// @param chainId The chainId of the transfer
struct TokenTransfer {
    address token; // address(0) for native, erc20 otherwise
    address from;
    address to;
    uint256 amount;
    uint256 chainId; // chainId of 0 means escrow balance should be transferred between `from` and `to`
}
/// @notice A call to be executed as part of the order. If a call is representing a "pre-hook", the output
///         of the call will be bridged to the destination chain. If a call is representing a "post-hook",
///         the output of the call will be sent to the user.
/// @param to        The address of the contract to call
/// @param isPreHook If true, the call is a "pre-hook". If false, the call is a "post-hook"
/// @param value     The value to send with the call
/// @param data      The data to send with the call
struct Route {
    address to;
    uint256 value;
    uint256 chainId;
    bytes data;
}
/// @notice An order that can be sequenced and settled by the protocol
///         To complete the order lifecycle, the order must be signed by the user, relayer, validator, and oracle
/// @param user             The address of the user
/// @param relayer          The address of the relayer
/// @param validator        The address of the validator
/// @param collateralAmount The amount of collateral to lock as part of the order
/// @param expiration       The order expiration timestamp. If a validator determines that input tokens haven't been transferred by expiration,
///                         it can cancel the order.
/// @param intentCommit     A hash of the order's input and output TokenTransfer[], or the order's "intent". Any internal Relay ETH fees to other
///                         parties in the order lifecylce should be specified in the output array. Note that the order of the encoded inputs will affect
///                         the intentCommit hash. The intentCommit is meant to be revealed in the call to `settleOrder`.
/// @param primaryCommit    A hash of the order's origin and destination Route[]. This route should satisfy the hashed intentCommit.
///                         The routeCommit is meant to be verified offchain between the relayer and the validator.
/// @param hookCommit       A hash of the order's pre and post hooks, if necessary. Note that the pre hook will be executed with the user's input tokens
///                         on the origin chain, and the post hook will be executed with the user's output tokens on the destination chain
struct Order {
    address user;
    address relayer;
    address validator;
    uint256 nonce;
    uint256 collateralAmount;
    uint256 inputDeadline;
    uint256 primaryDeadline;
    uint256 secondaryDeadline;
    bytes32 intentCommit;
    bytes32 primaryCommit;
    bytes32 secondaryCommit;
}
/// @notice Collateral balances (user or relayer)
/// @param totalBalance The total balance of the account
/// @param outstandingBalance The balance locked in initiated but unsettled orders
/// @param relayEthBalance Surplus ETH from fees that can be used to pay for fees or gas
struct Balances {
    uint256 totalBalance;
    uint256 outstandingBalance;
    uint256 relayEthBalance;
}
struct RelayerWitness {
    address relayer;
}
struct EscrowBalance {
    uint256 timelock;
    uint256 lockedBalance;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/**
 * @title IMulticaller
 * @notice Interface for the Multicaller contract.
 */
interface IMulticaller {
    /**
     * @dev Aggregates multiple calls in a single transaction.
     * @param targets  An array of addresses to call.
     * @param data     An array of calldata to forward to the targets.
     * @param values   How much ETH to forward to each target.
     * @param refundTo The address to transfer any remaining ETH in the contract after the calls.
     *                 If `address(0)`, remaining ETH will NOT be refunded.
     *                 If `address(1)`, remaining ETH will be refunded to `msg.sender`.
     *                 If anything else, remaining ETH will be refunded to `refundTo`.
     * @return An array of the returndata from each call.
     */
    function aggregate(
        address[] calldata targets,
        bytes[] calldata data,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes[] memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);
    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }
    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IEIP712 {
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/**
 * @title Multicaller
 * @author vectorized.eth
 * @notice Contract that allows for efficient aggregation
 *         of multiple calls in a single transaction.
 */
contract Multicaller {
    // =============================================================
    //                            ERRORS
    // =============================================================
    /**
     * @dev The lengths of the input arrays are not the same.
     */
    error ArrayLengthsMismatch();
    // =============================================================
    //                    AGGREGATION OPERATIONS
    // =============================================================
    /**
     * @dev Aggregates multiple calls in a single transaction.
     * @param targets  An array of addresses to call.
     * @param data     An array of calldata to forward to the targets.
     * @param values   How much ETH to forward to each target.
     * @param refundTo The address to transfer any remaining ETH in the contract after the calls.
     *                 If `address(0)`, remaining ETH will NOT be refunded.
     *                 If `address(1)`, remaining ETH will be refunded to `msg.sender`.
     *                 If anything else, remaining ETH will be refunded to `refundTo`.
     * @return An array of the returndata from each call.
     */
    function aggregate(
        address[] calldata targets,
        bytes[] calldata data,
        uint256[] calldata values,
        address refundTo
    ) external payable returns (bytes[] memory) {
        assembly {
            if iszero(and(eq(targets.length, data.length), eq(data.length, values.length))) {
                // Store the function selector of `ArrayLengthsMismatch()`.
                mstore(returndatasize(), 0x3b800a46)
                // Revert with (offset, size).
                revert(0x1c, 0x04)
            }
            let resultsSize := 0x40
            if data.length {
                let results := 0x40
                // Left shift by 5 is equivalent to multiplying by 0x20.
                data.length := shl(5, data.length)
                // Copy the offsets from calldata into memory.
                calldatacopy(results, data.offset, data.length)
                // Offset into `results`.
                let resultsOffset := data.length
                // Pointer to the end of `results`.
                let end := add(results, data.length)
                // For deriving the calldata offsets from the `results` pointer.
                let valuesOffsetDiff := sub(values.offset, results)
                let targetsOffsetDiff := sub(targets.offset, results)
                for {} 1 {} {
                    // The offset of the current bytes in the calldata.
                    let o := add(data.offset, mload(results))
                    let memPtr := add(resultsOffset, 0x40)
                    // Copy the current bytes from calldata to the memory.
                    calldatacopy(
                        memPtr,
                        add(o, 0x20), // The offset of the current bytes' bytes.
                        calldataload(o) // The length of the current bytes.
                    )
                    if iszero(
                        call(
                            gas(), // Remaining gas.
                            calldataload(add(targetsOffsetDiff, results)), // Address to call.
                            calldataload(add(valuesOffsetDiff, results)), // ETH to send.
                            memPtr, // Start of input calldata in memory.
                            calldataload(o), // Size of input calldata.
                            0x00, // We will use returndatacopy instead.
                            0x00 // We will use returndatacopy instead.
                        )
                    ) {
                        // Bubble up the revert if the call reverts.
                        returndatacopy(0x00, 0x00, returndatasize())
                        revert(0x00, returndatasize())
                    }
                    // Append the current `resultsOffset` into `results`.
                    mstore(results, resultsOffset)
                    // Append the returndatasize, and the returndata.
                    mstore(memPtr, returndatasize())
                    returndatacopy(add(memPtr, 0x20), 0x00, returndatasize())
                    // Advance the `resultsOffset` by `returndatasize() + 0x20`,
                    // rounded up to the next multiple of 0x20.
                    resultsOffset := and(add(add(resultsOffset, returndatasize()), 0x3f), not(0x1f))
                    // Advance the `results` pointer.
                    results := add(results, 0x20)
                    if eq(results, end) { break }
                }
                resultsSize := add(resultsOffset, 0x40)
            }
            if refundTo {
                // Force transfers all the remaining ETH in the contract to `refundTo`,
                // with a gas stipend of 100000, which should be enough for most use cases.
                // If sending via a regular call fails, force sends the ETH by
                // creating a temporary contract which uses `SELFDESTRUCT` to force send the ETH.
                if selfbalance() {
                    // If `refundTo` is `address(1)`, replace it with the `msg.sender`.
                    refundTo := xor(refundTo, mul(eq(refundTo, 1), xor(refundTo, caller())))
                    // Transfer the ETH and check if it succeeded or not.
                    if iszero(
                        call(100000, refundTo, selfbalance(), codesize(), 0x00, codesize(), 0x00)
                    ) {
                        mstore(0x00, refundTo) // Store the address in scratch space.
                        mstore8(0x0b, 0x73) // Opcode `PUSH20`.
                        mstore8(0x20, 0xff) // Opcode `SELFDESTRUCT`.
                        // We can directly use `SELFDESTRUCT` in the contract creation.
                        // Compatible with `SENDALL`: https://eips.ethereum.org/EIPS/eip-4758
                        if iszero(create(selfbalance(), 0x0b, 0x16)) {
                            // Coerce gas estimation to provide enough gas for the `create` above.
                            revert(codesize(), codesize())
                        }
                    }
                }
            }
            mstore(0x00, 0x20) // Store the memory offset of the `results`.
            mstore(0x20, targets.length) // Store `targets.length` into `results`.
            // Direct return.
            return(0x00, resultsSize)
        }
    }
    /**
     * @dev For receiving ETH.
     *      Does nothing and returns nothing.
     *      Called instead of `fallback()` if the calldatasize is zero.
     */
    receive() external payable {}
    /**
     * @dev Decompresses the calldata and performs a delegatecall
     *      with the decompressed calldata to itself.
     *
     *      Accompanying JavaScript library to compress the calldata:
     *      https://github.com/vectorized/solady/blob/main/js/solady.js
     *      (See: `LibZip.cdCompress`)
     */
    fallback() external payable {
        assembly {
            // If the calldata starts with the bitwise negation of
            // `bytes4(keccak256("aggregate(address[],bytes[],uint256[],address)"))`.
            let s := calldataload(returndatasize())
            if eq(shr(224, s), 0x66e0daa0) {
                mstore(returndatasize(), not(s))
                let o := 4
                for { let i := o } lt(i, calldatasize()) {} {
                    let c := byte(returndatasize(), calldataload(i))
                    i := add(i, 1)
                    if iszero(c) {
                        let d := byte(returndatasize(), calldataload(i))
                        i := add(i, 1)
                        // Fill with either 0xff or 0x00.
                        mstore(o, not(returndatasize()))
                        if iszero(gt(d, 0x7f)) { codecopy(o, codesize(), add(d, 1)) }
                        o := add(o, add(and(d, 0x7f), 1))
                        continue
                    }
                    mstore8(o, c)
                    o := add(o, 1)
                }
                let success := delegatecall(gas(), address(), 0x00, o, 0x00, 0x00)
                returndatacopy(0x00, 0x00, returndatasize())
                if iszero(success) { revert(0x00, returndatasize()) }
                return(0x00, returndatasize())
            }
            revert(returndatasize(), returndatasize())
        }
    }
}