/*
                                                           ,▄▓▓██▌   ,╓▄▄▓▓▓▓▓▓▓▓▄▄▄,,
                                                        ,▓██▓███▓▄▓███▓╬╬╬╬╬╬╬╬╬╬╬╬╬▓███▓▄,
                                                  ▄█   ▓██╬╣███████╬▓▀╬╬▓▓▓████████████▓█████▄,
                                                 ▓██▌ ▓██╬╣██████╬▓▌  ██████████████████████▌╙╙▀ⁿ
                                                ▐████████╬▓████▓▓█╨ ▄ ╟█████████▓▓╬╬╬╬╬▓▓█████▓▄
                                  └▀▓▓▄╓        ╟█▓╣█████▓██████▀ ╓█▌ ███████▓▓▓▓▓╬╬╬╬╬╬╬╬╬╬╬╬▓██▓▄
                                     └▀████▓▄╥  ▐██╬╬██████████╙ Æ▀─ ▓███▀╚╠╬╩▀▀███████▓▓╬╬╬╬╬╬╬╬╬██▄
                                        └▀██▓▀▀█████▓╬▓██████▀     ▄█████▒╠"      └╙▓██████▓╬╬╬╬╬╬╬╬██▄
                                           └▀██▄,└╙▀▀████▌└╙    ^"▀╙╙╙"╙██      @▄    ╙▀███████╬╬╬╬╬╬╬██µ
                                              └▀██▓▄, ██▌       ╒       ╙█▓     ]▓█▓╔    ▀███████▓╬╬╬╬╬▓█▌
                                                  ▀█████       ▓         ╟█▌    ]╠██▓░▒╓   ▀████████╬╬╬╬╣█▌
                                                  ▐████      ╓█▀█▌      ,██▌    ╚Å███▓▒▒╠╓  ╙█████████╬╬╬╣█▌
                                                  └████     ▓█░░▓█      ▀▀▀    φ▒╫████▒▒▒▒╠╓  █████████▓╬╬▓█µ
                                                   ╘███µ ▌▄█▓▄▓▀`     ,▀    ,╔╠░▓██████▌╠▒▒▒φ  ██████████╬╬██
                                                   ▐████µ╙▓▀`     ,▀╙,╔╔φφφ╠░▄▓███████▌░▓╙▒▒▒╠ └██╬███████╬▓█⌐
                                                   ╫██ ▓▌         ▌φ▒▒░▓██████████████▌▒░▓╚▒▒▒╠ ▓██╬▓██████╣█▌
                                                   ██▌           ▌╔▒▒▄████████████████▒▒▒░▌╠▒▒▒≥▐██▓╬╬███████▌
                                                   ██▌      ,╓φ╠▓«▒▒▓████▀  ▀█████████▌▒▒▒╟░▒▒▒▒▐███╬╬╣████▓█▌
                                                  ▐██      ╠▒▄▓▓███▓████└     ▀████████▌▒▒░▌╚▒▒▒▐███▓╬╬████ ╙▌
                                                  ███  )  ╠▒░░░▒░╬████▀        └████████░▒▒░╬∩▒▒▓████╬╬╣███
                                                 ▓██    ╠╠▒▒▐█▀▀▌`░╫██           ███████▒▒▒▒░▒▒½█████╬╬╣███
                                                ███ ,█▄ ╠▒▒▒╫▌,▄▀,▒╫██           ╟██████▒▒▒░╣⌠▒▓█████╬╬╣██▌
                                               ╘██µ ██` ╠▒▒░██╬φ╠▄▓██`            ██████░░▌φ╠░▓█████▓╬╬▓██
                                                ╟██  .φ╠▒░▄█▀░░▄██▀└              █████▌▒╣φ▒░▓██████╬╬╣██
                                                 ▀██▄▄▄╓▄███████▀                ▐█████░▓φ▒▄███████▓╬╣██
                                                   ╙▀▀▀██▀└                      ████▓▄▀φ▄▓████████╬▓█▀
                                                                                ▓███╬╩╔╣██████████▓██└
                                                                              ╓████▀▄▓████████▀████▀
                                                                            ,▓███████████████─]██╙
                                                                         ,▄▓██████████████▀└  ╙
                                                                    ,╓▄▓███████████████▀╙
                                                             `"▀▀▀████████▀▀▀▀`▄███▀▀└
                                                                              └└
                    11\\   11\\                     11\\             11\\   11\\            11\\                                       11\\
                  1111 |  \\__|                    11 |            111\\  11 |           11 |                                      11 |
                  \\_11 |  11\\ 1111111\\   1111111\\ 1111111\\        1111\\ 11 | 111111\\ 111111\\   11\\  11\\  11\\  111111\\   111111\\  11 |  11\\
                    11 |  11 |11  __11\\ 11  _____|11  __11\\       11 11\\11 |11  __11\\\\_11  _|  11 | 11 | 11 |11  __11\\ 11  __11\\ 11 | 11  |
                    11 |  11 |11 |  11 |11 /      11 |  11 |      11 \\1111 |11111111 | 11 |    11 | 11 | 11 |11 /  11 |11 |  \\__|111111  /
                    11 |  11 |11 |  11 |11 |      11 |  11 |      11 |\\111 |11   ____| 11 |11\\ 11 | 11 | 11 |11 |  11 |11 |      11  _11<
                  111111\\ 11 |11 |  11 |\\1111111\\ 11 |  11 |      11 | \\11 |\\1111111\\  \\1111  |\\11111\\1111  |\\111111  |11 |      11 | \\11\\
                  \\______|\\__|\\__|  \\__| \\_______|\\__|  \\__|      \\__|  \\__| \\_______|  \\____/  \\_____\\____/  \\______/ \\__|      \\__|  \\__|
                               111111\\                                                               11\\     11\\
                              11  __11\\                                                              11 |    \\__|
                              11 /  11 | 111111\\   111111\\   111111\\   111111\\   111111\\   111111\\ 111111\\   11\\  111111\\  1111111\\
                              11111111 |11  __11\\ 11  __11\\ 11  __11\\ 11  __11\\ 11  __11\\  \\____11\\\\_11  _|  11 |11  __11\\ 11  __11\\
                              11  __11 |11 /  11 |11 /  11 |11 |  \\__|11111111 |11 /  11 | 1111111 | 11 |    11 |11 /  11 |11 |  11 |
                              11 |  11 |11 |  11 |11 |  11 |11 |      11   ____|11 |  11 |11  __11 | 11 |11\\ 11 |11 |  11 |11 |  11 |
                              11 |  11 |\\1111111 |\\1111111 |11 |      \\1111111\\ \\1111111 |\\1111111 | \\1111  |11 |\\111111  |11 |  11 |
                              \\__|  \\__| \\____11 | \\____11 |\\__|       \\_______| \\____11 | \\_______|  \\____/ \\__| \\______/ \\__|  \\__|
                                        11\\   11 |11\\   11 |                    11\\   11 |
                                        \\111111  |\\111111  |                    \\111111  |
                                         \\______/  \\______/                      \\______/
                                                1111111\\                        11\\
                                                11  __11\\                       11 |
                                                11 |  11 | 111111\\  11\\   11\\ 111111\\    111111\\   111111\\
                                                1111111  |11  __11\\ 11 |  11 |\\_11  _|  11  __11\\ 11  __11\\
                                                11  __11< 11 /  11 |11 |  11 |  11 |    11111111 |11 |  \\__|
                                                11 |  11 |11 |  11 |11 |  11 |  11 |11\\ 11   ____|11 |
                                                11 |  11 |\\111111  |\\111111  |  \\1111  |\\1111111\\ 11 |
                                                \\__|  \\__| \\______/  \\______/    \\____/  \\_______|\\__|
*/
// SPDX-License-Identifier: MIT
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
pragma solidity 0.8.23;
type MakerTraits is uint256;
/**
 * @title MakerTraitsLib
 * @notice A library to manage and check MakerTraits, which are used to encode the maker's preferences for an order in a single uint256.
 * @dev
 * The MakerTraits type is a uint256 and different parts of the number are used to encode different traits.
 * High bits are used for flags
 * 255 bit `NO_PARTIAL_FILLS_FLAG`          - if set, the order does not allow partial fills
 * 254 bit `ALLOW_MULTIPLE_FILLS_FLAG`      - if set, the order permits multiple fills
 * 253 bit                                  - unused
 * 252 bit `PRE_INTERACTION_CALL_FLAG`      - if set, the order requires pre-interaction call
 * 251 bit `POST_INTERACTION_CALL_FLAG`     - if set, the order requires post-interaction call
 * 250 bit `NEED_CHECK_EPOCH_MANAGER_FLAG`  - if set, the order requires to check the epoch manager
 * 249 bit `HAS_EXTENSION_FLAG`             - if set, the order has extension(s)
 * 248 bit `USE_PERMIT2_FLAG`               - if set, the order uses permit2
 * 247 bit `UNWRAP_WETH_FLAG`               - if set, the order requires to unwrap WETH
 * Low 200 bits are used for allowed sender, expiration, nonceOrEpoch, and series
 * uint80 last 10 bytes of allowed sender address (0 if any)
 * uint40 expiration timestamp (0 if none)
 * uint40 nonce or epoch
 * uint40 series
 */
library MakerTraitsLib {
    // Low 200 bits are used for allowed sender, expiration, nonceOrEpoch, and series
    uint256 private constant _ALLOWED_SENDER_MASK = type(uint80).max;
    uint256 private constant _EXPIRATION_OFFSET = 80;
    uint256 private constant _EXPIRATION_MASK = type(uint40).max;
    uint256 private constant _NONCE_OR_EPOCH_OFFSET = 120;
    uint256 private constant _NONCE_OR_EPOCH_MASK = type(uint40).max;
    uint256 private constant _SERIES_OFFSET = 160;
    uint256 private constant _SERIES_MASK = type(uint40).max;
    uint256 private constant _NO_PARTIAL_FILLS_FLAG = 1 << 255;
    uint256 private constant _ALLOW_MULTIPLE_FILLS_FLAG = 1 << 254;
    uint256 private constant _PRE_INTERACTION_CALL_FLAG = 1 << 252;
    uint256 private constant _POST_INTERACTION_CALL_FLAG = 1 << 251;
    uint256 private constant _NEED_CHECK_EPOCH_MANAGER_FLAG = 1 << 250;
    uint256 private constant _HAS_EXTENSION_FLAG = 1 << 249;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 248;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 247;
    /**
     * @notice Checks if the order has the extension flag set.
     * @dev If the `HAS_EXTENSION_FLAG` is set in the makerTraits, then the protocol expects that the order has extension(s).
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the flag is set.
     */
    function hasExtension(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _HAS_EXTENSION_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker allows a specific taker to fill the order.
     * @param makerTraits The traits of the maker.
     * @param sender The address of the taker to be checked.
     * @return result A boolean indicating whether the taker is allowed.
     */
    function isAllowedSender(MakerTraits makerTraits, address sender) internal pure returns (bool) {
        uint160 allowedSender = uint160(MakerTraits.unwrap(makerTraits) & _ALLOWED_SENDER_MASK);
        return allowedSender == 0 || allowedSender == uint160(sender) & _ALLOWED_SENDER_MASK;
    }
    /**
     * @notice Checks if the order has expired.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the order has expired.
     */
    function isExpired(MakerTraits makerTraits) internal view returns (bool) {
        uint256 expiration = (MakerTraits.unwrap(makerTraits) >> _EXPIRATION_OFFSET) & _EXPIRATION_MASK;
        return expiration != 0 && expiration < block.timestamp;  // solhint-disable-line not-rely-on-time
    }
    /**
     * @notice Returns the nonce or epoch of the order.
     * @param makerTraits The traits of the maker.
     * @return result The nonce or epoch of the order.
     */
    function nonceOrEpoch(MakerTraits makerTraits) internal pure returns (uint256) {
        return (MakerTraits.unwrap(makerTraits) >> _NONCE_OR_EPOCH_OFFSET) & _NONCE_OR_EPOCH_MASK;
    }
    /**
     * @notice Returns the series of the order.
     * @param makerTraits The traits of the maker.
     * @return result The series of the order.
     */
    function series(MakerTraits makerTraits) internal pure returns (uint256) {
        return (MakerTraits.unwrap(makerTraits) >> _SERIES_OFFSET) & _SERIES_MASK;
    }
    /**
      * @notice Determines if the order allows partial fills.
      * @dev If the _NO_PARTIAL_FILLS_FLAG is not set in the makerTraits, then the order allows partial fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the maker allows partial fills.
      */
    function allowPartialFills(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _NO_PARTIAL_FILLS_FLAG) == 0;
    }
    /**
     * @notice Checks if the maker needs pre-interaction call.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs a pre-interaction call.
     */
    function needPreInteractionCall(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _PRE_INTERACTION_CALL_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker needs post-interaction call.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs a post-interaction call.
     */
    function needPostInteractionCall(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _POST_INTERACTION_CALL_FLAG) != 0;
    }
    /**
      * @notice Determines if the order allows multiple fills.
      * @dev If the _ALLOW_MULTIPLE_FILLS_FLAG is set in the makerTraits, then the maker allows multiple fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the maker allows multiple fills.
      */
    function allowMultipleFills(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _ALLOW_MULTIPLE_FILLS_FLAG) != 0;
    }
    /**
      * @notice Determines if an order should use the bit invalidator or remaining amount validator.
      * @dev The bit invalidator can be used if the order does not allow partial or multiple fills.
      * @param makerTraits The traits of the maker, determining their preferences for the order.
      * @return result A boolean indicating whether the bit invalidator should be used.
      * True if the order requires the use of the bit invalidator.
      */
    function useBitInvalidator(MakerTraits makerTraits) internal pure returns (bool) {
        return !allowPartialFills(makerTraits) || !allowMultipleFills(makerTraits);
    }
    /**
     * @notice Checks if the maker needs to check the epoch.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs to check the epoch manager.
     */
    function needCheckEpochManager(MakerTraits makerTraits) internal pure returns (bool) {
        return (MakerTraits.unwrap(makerTraits) & _NEED_CHECK_EPOCH_MANAGER_FLAG) != 0;
    }
    /**
     * @notice Checks if the maker uses permit2.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker uses permit2.
     */
    function usePermit2(MakerTraits makerTraits) internal pure returns (bool) {
        return MakerTraits.unwrap(makerTraits) & _USE_PERMIT2_FLAG != 0;
    }
    /**
     * @notice Checks if the maker needs to unwraps WETH.
     * @param makerTraits The traits of the maker.
     * @return result A boolean indicating whether the maker needs to unwrap WETH.
     */
    function unwrapWeth(MakerTraits makerTraits) internal pure returns (bool) {
        return MakerTraits.unwrap(makerTraits) & _UNWRAP_WETH_FLAG != 0;
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
type TakerTraits is uint256;
/**
 * @title TakerTraitsLib
 * @notice This library to manage and check TakerTraits, which are used to encode the taker's preferences for an order in a single uint256.
 * @dev The TakerTraits are structured as follows:
 * High bits are used for flags
 * 255 bit `_MAKER_AMOUNT_FLAG`           - If set, the taking amount is calculated based on making amount, otherwise making amount is calculated based on taking amount.
 * 254 bit `_UNWRAP_WETH_FLAG`            - If set, the WETH will be unwrapped into ETH before sending to taker.
 * 253 bit `_SKIP_ORDER_PERMIT_FLAG`      - If set, the order skips maker's permit execution.
 * 252 bit `_USE_PERMIT2_FLAG`            - If set, the order uses the permit2 function for authorization.
 * 251 bit `_ARGS_HAS_TARGET`             - If set, then first 20 bytes of args are treated as target address for maker’s funds transfer.
 * 224-247 bits `ARGS_EXTENSION_LENGTH`   - The length of the extension calldata in the args.
 * 200-223 bits `ARGS_INTERACTION_LENGTH` - The length of the interaction calldata in the args.
 * 0-184 bits                             - The threshold amount (the maximum amount a taker agrees to give in exchange for a making amount).
 */
library TakerTraitsLib {
    uint256 private constant _MAKER_AMOUNT_FLAG = 1 << 255;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 254;
    uint256 private constant _SKIP_ORDER_PERMIT_FLAG = 1 << 253;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 252;
    uint256 private constant _ARGS_HAS_TARGET = 1 << 251;
    uint256 private constant _ARGS_EXTENSION_LENGTH_OFFSET = 224;
    uint256 private constant _ARGS_EXTENSION_LENGTH_MASK = 0xffffff;
    uint256 private constant _ARGS_INTERACTION_LENGTH_OFFSET = 200;
    uint256 private constant _ARGS_INTERACTION_LENGTH_MASK = 0xffffff;
    uint256 private constant _AMOUNT_MASK = 0x000000000000000000ffffffffffffffffffffffffffffffffffffffffffffff;
    /**
     * @notice Checks if the args should contain target address.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the args should contain target address.
     */
    function argsHasTarget(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _ARGS_HAS_TARGET) != 0;
    }
    /**
     * @notice Retrieves the length of the extension calldata from the takerTraits.
     * @param takerTraits The traits of the taker.
     * @return result The length of the extension calldata encoded in the takerTraits.
     */
    function argsExtensionLength(TakerTraits takerTraits) internal pure returns (uint256) {
        return (TakerTraits.unwrap(takerTraits) >> _ARGS_EXTENSION_LENGTH_OFFSET) & _ARGS_EXTENSION_LENGTH_MASK;
    }
    /**
     * @notice Retrieves the length of the interaction calldata from the takerTraits.
     * @param takerTraits The traits of the taker.
     * @return result The length of the interaction calldata encoded in the takerTraits.
     */
    function argsInteractionLength(TakerTraits takerTraits) internal pure returns (uint256) {
        return (TakerTraits.unwrap(takerTraits) >> _ARGS_INTERACTION_LENGTH_OFFSET) & _ARGS_INTERACTION_LENGTH_MASK;
    }
    /**
     * @notice Checks if the taking amount should be calculated based on making amount.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the taking amount should be calculated based on making amount.
     */
    function isMakingAmount(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _MAKER_AMOUNT_FLAG) != 0;
    }
    /**
     * @notice Checks if the order should unwrap WETH and send ETH to taker.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order should unwrap WETH.
     */
    function unwrapWeth(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _UNWRAP_WETH_FLAG) != 0;
    }
    /**
     * @notice Checks if the order should skip maker's permit execution.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order don't apply permit.
     */
    function skipMakerPermit(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _SKIP_ORDER_PERMIT_FLAG) != 0;
    }
    /**
     * @notice Checks if the order uses the permit2 instead of permit.
     * @param takerTraits The traits of the taker.
     * @return result A boolean indicating whether the order uses the permit2.
     */
    function usePermit2(TakerTraits takerTraits) internal pure returns (bool) {
        return (TakerTraits.unwrap(takerTraits) & _USE_PERMIT2_FLAG) != 0;
    }
    /**
     * @notice Retrieves the threshold amount from the takerTraits.
     * The maximum amount a taker agrees to give in exchange for a making amount.
     * @param takerTraits The traits of the taker.
     * @return result The threshold amount encoded in the takerTraits.
     */
    function threshold(TakerTraits takerTraits) internal pure returns (uint256) {
        return TakerTraits.unwrap(takerTraits) & _AMOUNT_MASK;
    }
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
type Address is uint256;
/**
* @dev Library for working with addresses encoded as uint256 values, which can include flags in the highest bits.
*/
library AddressLib {
    uint256 private constant _LOW_160_BIT_MASK = (1 << 160) - 1;
    /**
    * @notice Returns the address representation of a uint256.
    * @param a The uint256 value to convert to an address.
    * @return The address representation of the provided uint256 value.
    */
    function get(Address a) internal pure returns (address) {
        return address(uint160(Address.unwrap(a) & _LOW_160_BIT_MASK));
    }
    /**
    * @notice Checks if a given flag is set for the provided address.
    * @param a The address to check for the flag.
    * @param flag The flag to check for in the provided address.
    * @return True if the provided flag is set in the address, false otherwise.
    */
    function getFlag(Address a, uint256 flag) internal pure returns (bool) {
        return (Address.unwrap(a) & flag) != 0;
    }
    /**
    * @notice Returns a uint32 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint32 value.
    * @param offset The bit offset at which the uint32 value is stored.
    * @return The uint32 value stored in the address at the specified bit offset.
    */
    function getUint32(Address a, uint256 offset) internal pure returns (uint32) {
        return uint32(Address.unwrap(a) >> offset);
    }
    /**
    * @notice Returns a uint64 value stored at a specific bit offset in the provided address.
    * @param a The address containing the uint64 value.
    * @param offset The bit offset at which the uint64 value is stored.
    * @return The uint64 value stored in the address at the specified bit offset.
    */
    function getUint64(Address a, uint256 offset) internal pure returns (uint64) {
        return uint64(Address.unwrap(a) >> offset);
    }
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IOrderMixin {
    struct Order {
        uint256 salt;
        Address maker;
        Address receiver;
        Address makerAsset;
        Address takerAsset;
        uint256 makingAmount;
        uint256 takingAmount;
        MakerTraits makerTraits;
    }
    error InvalidatedOrder();
    error TakingAmountExceeded();
    error PrivateOrder();
    error BadSignature();
    error OrderExpired();
    error WrongSeriesNonce();
    error SwapWithZeroAmount();
    error PartialFillNotAllowed();
    error OrderIsNotSuitableForMassInvalidation();
    error EpochManagerAndBitInvalidatorsAreIncompatible();
    error ReentrancyDetected();
    error PredicateIsNotTrue();
    error TakingAmountTooHigh();
    error MakingAmountTooLow();
    error TransferFromMakerToTakerFailed();
    error TransferFromTakerToMakerFailed();
    error MismatchArraysLengths();
    error InvalidPermit2Transfer();
    error SimulationResults(bool success, bytes res);
    /**
     * @notice Emitted when order gets filled
     * @param orderHash Hash of the order
     * @param remainingAmount Amount of the maker asset that remains to be filled
     */
    event OrderFilled(
        bytes32 orderHash,
        uint256 remainingAmount
    );
    /**
     * @notice Emitted when order without `useBitInvalidator` gets cancelled
     * @param orderHash Hash of the order
     */
    event OrderCancelled(
        bytes32 orderHash
    );
    /**
     * @notice Emitted when order with `useBitInvalidator` gets cancelled
     * @param maker Maker address
     * @param slotIndex Slot index that was updated
     * @param slotValue New slot value
     */
    event BitInvalidatorUpdated(
        address indexed maker,
        uint256 slotIndex,
        uint256 slotValue
    );
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param maker Maker address
     * @param slot Slot number to return bitmask for
     * @return result Each bit represents whether corresponding was already invalidated
     */
    function bitInvalidatorForOrder(address maker, uint256 slot) external view returns(uint256 result);
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param orderHash Hash of the order
     * @return remaining Remaining amount of the order
     */
    function remainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 remaining);
    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param orderHash Hash of the order
     * @return remainingRaw Inverse of the remaining amount of the order if order was filled at least once, otherwise 0
     */
    function rawRemainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 remainingRaw);
    /**
     * @notice Cancels order's quote
     * @param makerTraits Order makerTraits
     * @param orderHash Hash of the order to cancel
     */
    function cancelOrder(MakerTraits makerTraits, bytes32 orderHash) external;
    /**
     * @notice Cancels orders' quotes
     * @param makerTraits Orders makerTraits
     * @param orderHashes Hashes of the orders to cancel
     */
    function cancelOrders(MakerTraits[] calldata makerTraits, bytes32[] calldata orderHashes) external;
    /**
     * @notice Cancels all quotes of the maker (works for bit-invalidating orders only)
     * @param makerTraits Order makerTraits
     * @param additionalMask Additional bitmask to invalidate orders
     */
    function bitsInvalidateForOrder(MakerTraits makerTraits, uint256 additionalMask) external;
    /**
     * @notice Returns order hash, hashed with limit order protocol contract EIP712
     * @param order Order
     * @return orderHash Hash of the order
     */
    function hashOrder(IOrderMixin.Order calldata order) external view returns(bytes32 orderHash);
    /**
     * @notice Delegates execution to custom implementation. Could be used to validate if `transferFrom` works properly
     * @dev The function always reverts and returns the simulation results in revert data.
     * @param target Addresses that will be delegated
     * @param data Data that will be passed to delegatee
     */
    function simulate(address target, bytes calldata data) external;
    /**
     * @notice Fills order's quote, fully or partially (whichever is possible).
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrder(
        Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits
    ) external payable returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillOrder` but allows to specify arguments that are used by the taker.
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @param args Arguments that are used by the taker (target, extension, interaction, permit)
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderArgs(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external payable returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillOrder` but uses contract-based signatures.
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillContractOrder(
        Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits
    ) external returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
    /**
     * @notice Same as `fillContractOrder` but allows to specify arguments that are used by the taker.
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param amount Taker amount to fill
     * @param takerTraits Specifies threshold as maximum allowed takingAmount when takingAmount is zero, otherwise specifies
     * minimum allowed makingAmount. The 2nd (0 based index) highest bit specifies whether taker wants to skip maker's permit.
     * @param args Arguments that are used by the taker (target, extension, interaction, permit)
     * @return makingAmount Actual amount transferred from maker to taker
     * @return takingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillContractOrderArgs(
        Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash);
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IAmountGetter {
    /**
     * @notice View method that gets called to determine the actual making amount
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function getMakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external view returns (uint256);
    /**
     * @notice View method that gets called to determine the actual making amount
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function getTakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external view returns (uint256);
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IPostInteraction {
    /**
     * @notice Callback method that gets called after all fund transfers
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function postInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
interface IPreInteraction {
    /**
     * @notice Callback method that gets called before any funds transfers
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function preInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// File @1inch/limit-order-protocol-contract/contracts/interfaces/[email protected]
/**
 * @title Interface for interactor which acts after `maker -> taker` transfer but before `taker -> maker` transfer.
 * @notice The order filling steps are `preInteraction` =>` Transfer "maker -> taker"` => **`Interaction`** => `Transfer "taker -> maker"` => `postInteraction`
 */
interface ITakerInteraction {
    /**
     * @dev This callback allows to interactively handle maker aseets to produce takers assets, doesn't supports ETH as taker assets
     * @notice Callback method that gets called after maker fund transfer but before taker fund transfer
     * @param order Order being processed
     * @param extension Order extension data
     * @param orderHash Hash of the order being processed
     * @param taker Taker address
     * @param makingAmount Actual making amount
     * @param takingAmount Actual taking amount
     * @param remainingMakingAmount Order remaining making amount
     * @param extraData Extra data
     */
    function takerInteraction(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        bytes32 orderHash,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingMakingAmount,
        bytes calldata extraData
    ) external;
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
type Offsets is uint256;
/// @title OffsetsLib
/// @dev A library for retrieving values by offsets from a concatenated calldata.
library OffsetsLib {
    /// @dev Error to be thrown when the offset is out of bounds.
    error OffsetOutOfBounds();
    /**
     * @notice Retrieves the field value calldata corresponding to the provided field index from the concatenated calldata.
     * @dev
     * The function performs the following steps:
     * 1. Retrieve the start and end of the segment corresponding to the provided index from the offsets array.
     * 2. Get the value from segment using offset and length calculated based on the start and end of the segment.
     * 3. Throw `OffsetOutOfBounds` error if the length of the segment is greater than the length of the concatenated data.
     * @param offsets The offsets encoding the start and end of each segment within the concatenated calldata.
     * @param concat The concatenated calldata.
     * @param index The index of the segment to retrieve. The field index 0 corresponds to the lowest bytes of the offsets array.
     * @return result The calldata from a segment of the concatenated calldata corresponding to the provided index.
     */
    function get(Offsets offsets, bytes calldata concat, uint256 index) internal pure returns(bytes calldata result) {
        bytes4 exception = OffsetOutOfBounds.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let bitShift := shl(5, index)                                   // bitShift = index * 32
            let begin := and(0xffffffff, shr(bitShift, shl(32, offsets)))   // begin = offsets[ bitShift : bitShift + 32 ]
            let end := and(0xffffffff, shr(bitShift, offsets))              // end   = offsets[ bitShift + 32 : bitShift + 64 ]
            result.offset := add(concat.offset, begin)
            result.length := sub(end, begin)
            if gt(end, concat.length) {
                mstore(0, exception)
                revert(0, 4)
            }
        }
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
/**
 * @title ExtensionLib
 * @notice Library for retrieving extensions information for the IOrderMixin Interface.
 */
library ExtensionLib {
    using AddressLib for Address;
    using OffsetsLib for Offsets;
    enum DynamicField {
        MakerAssetSuffix,
        TakerAssetSuffix,
        MakingAmountData,
        TakingAmountData,
        Predicate,
        MakerPermit,
        PreInteractionData,
        PostInteractionData,
        CustomData
    }
    /**
     * @notice Returns the MakerAssetSuffix from the provided extension calldata.
     * @param extension The calldata from which the MakerAssetSuffix is to be retrieved.
     * @return calldata Bytes representing the MakerAssetSuffix.
     */
    function makerAssetSuffix(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.MakerAssetSuffix);
    }
    /**
     * @notice Returns the TakerAssetSuffix from the provided extension calldata.
     * @param extension The calldata from which the TakerAssetSuffix is to be retrieved.
     * @return calldata Bytes representing the TakerAssetSuffix.
     */
    function takerAssetSuffix(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.TakerAssetSuffix);
    }
    /**
     * @notice Returns the MakingAmountData from the provided extension calldata.
     * @param extension The calldata from which the MakingAmountData is to be retrieved.
     * @return calldata Bytes representing the MakingAmountData.
     */
    function makingAmountData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.MakingAmountData);
    }
    /**
     * @notice Returns the TakingAmountData from the provided extension calldata.
     * @param extension The calldata from which the TakingAmountData is to be retrieved.
     * @return calldata Bytes representing the TakingAmountData.
     */
    function takingAmountData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.TakingAmountData);
    }
    /**
     * @notice Returns the order's predicate from the provided extension calldata.
     * @param extension The calldata from which the predicate is to be retrieved.
     * @return calldata Bytes representing the predicate.
     */
    function predicate(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.Predicate);
    }
    /**
     * @notice Returns the maker's permit from the provided extension calldata.
     * @param extension The calldata from which the maker's permit is to be retrieved.
     * @return calldata Bytes representing the maker's permit.
     */
    function makerPermit(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.MakerPermit);
    }
    /**
     * @notice Returns the pre-interaction from the provided extension calldata.
     * @param extension The calldata from which the pre-interaction is to be retrieved.
     * @return calldata Bytes representing the pre-interaction.
     */
    function preInteractionTargetAndData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.PreInteractionData);
    }
    /**
     * @notice Returns the post-interaction from the provided extension calldata.
     * @param extension The calldata from which the post-interaction is to be retrieved.
     * @return calldata Bytes representing the post-interaction.
     */
    function postInteractionTargetAndData(bytes calldata extension) internal pure returns(bytes calldata) {
        return _get(extension, DynamicField.PostInteractionData);
    }
    /**
     * @notice Returns extra suffix data from the provided extension calldata.
     * @param extension The calldata from which the extra suffix data is to be retrieved.
     * @return calldata Bytes representing the extra suffix data.
     */
    function customData(bytes calldata extension) internal pure returns(bytes calldata) {
        if (extension.length < 0x20) return msg.data[:0];
        uint256 offsets = uint256(bytes32(extension));
        unchecked {
            return extension[0x20 + (offsets >> 224):];
        }
    }
    /**
     * @notice Retrieves a specific field from the provided extension calldata.
     * @dev The first 32 bytes of an extension calldata contain offsets to the end of each field within the calldata.
     * @param extension The calldata from which the field is to be retrieved.
     * @param field The specific dynamic field to retrieve from the extension.
     * @return calldata Bytes representing the requested field.
     */
    function _get(bytes calldata extension, DynamicField field) private pure returns(bytes calldata) {
        if (extension.length < 0x20) return msg.data[:0];
        Offsets offsets;
        bytes calldata concat;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            offsets := calldataload(extension.offset)
            concat.offset := add(extension.offset, 0x20)
            concat.length := sub(extension.length, 0x20)
        }
        return offsets.get(concat, uint256(field));
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
/// @title The helper library to calculate linearly taker amount from maker amount and vice versa.
library AmountCalculatorLib {
    /// @notice Calculates maker amount
    /// @return Result Floored maker amount
    function getMakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapTakerAmount) internal pure returns(uint256) {
        if ((swapTakerAmount | orderMakerAmount) >> 128 == 0) {
            unchecked {
                return (swapTakerAmount * orderMakerAmount) / orderTakerAmount;
            }
        }
        return swapTakerAmount * orderMakerAmount / orderTakerAmount;
    }
    /// @notice Calculates taker amount
    /// @return Result Ceiled taker amount
    function getTakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapMakerAmount) internal pure returns(uint256) {
        if ((swapMakerAmount | orderTakerAmount) >> 128 == 0) {
            unchecked {
                return (swapMakerAmount * orderTakerAmount + orderMakerAmount - 1) / orderMakerAmount;
            }
        }
        return (swapMakerAmount * orderTakerAmount + orderMakerAmount - 1) / orderMakerAmount;
    }
}
// File @openzeppelin/contracts/interfaces/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC1271.sol)
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
library ECDSA {
    // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
    // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
    // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
    // signatures from current libraries generate a unique signature with an s-value in the lower half order.
    //
    // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
    // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
    // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
    // these malleable signatures as well.
    uint256 private constant _S_BOUNDARY = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0 + 1;
    uint256 private constant _COMPACT_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _COMPACT_V_SHIFT = 255;
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (address signer) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)
                mstore(ptr, hash)
                mstore(add(ptr, 0x20), v)
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (address signer) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let s := and(vs, _COMPACT_S_MASK)
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)
                mstore(ptr, hash)
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }
    /// @dev WARNING!!!
    /// There is a known signature malleability issue with two representations of signatures!
    /// Even though this function is able to verify both standard 65-byte and compact 64-byte EIP-2098 signatures
    /// one should never use raw signatures for any kind of invalidation logic in their code.
    /// As the standard and compact representations are interchangeable any invalidation logic that relies on
    /// signature uniqueness will get rekt.
    /// More info: https://github.com/OpenZeppelin/openzeppelin-contracts/security/advisories/GHSA-4h98-2769-gh6h
    function recover(bytes32 hash, bytes calldata signature) internal view returns (address signer) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // memory[ptr:ptr+0x80] = (hash, v, r, s)
            switch signature.length
            case 65 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                mstore(add(ptr, 0x20), byte(0, calldataload(add(signature.offset, 0x40))))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x40)
            }
            case 64 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                let vs := calldataload(add(signature.offset, 0x20))
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x20)
                mstore(add(ptr, 0x60), and(vs, _COMPACT_S_MASK))
            }
            default {
                ptr := 0
            }
            if ptr {
                if lt(mload(add(ptr, 0x60)), _S_BOUNDARY) {
                    // memory[ptr:ptr+0x20] = (hash)
                    mstore(ptr, hash)
                    mstore(0, 0)
                    pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                    signer := mload(0)
                }
            }
        }
    }
    function recoverOrIsValidSignature(
        address signer,
        bytes32 hash,
        bytes calldata signature
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if ((signature.length == 64 || signature.length == 65) && recover(hash, signature) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, signature);
    }
    function recoverOrIsValidSignature(
        address signer,
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, v, r, s) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, v, r, s);
    }
    function recoverOrIsValidSignature(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, r, vs);
    }
    function recoverOrIsValidSignature65(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature65(signer, hash, r, vs);
    }
    function isValidSignature(
        address signer,
        bytes32 hash,
        bytes calldata signature
    ) internal view returns (bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, signature));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), signature.length)
            calldatacopy(add(ptr, 0x64), signature.offset, signature.length)
            if staticcall(gas(), signer, ptr, add(0x64, signature.length), 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function isValidSignature(
        address signer,
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal view returns (bool success) {
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), s)
            mstore8(add(ptr, 0xa4), v)
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function isValidSignature(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs)));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 64)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), vs)
            if staticcall(gas(), signer, ptr, 0xa4, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function isValidSignature65(
        address signer,
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal view returns (bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs & ~uint256(1 << 255), uint8(vs >> 255))));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), and(vs, _COMPACT_S_MASK))
            mstore8(add(ptr, 0xa4), add(27, shr(_COMPACT_V_SHIFT, vs)))
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 res) {
        // 32 is the length in bytes of hash, enforced by the type signature above
        // return keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", hash));
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            mstore(0, 0x19457468657265756d205369676e6564204d6573736167653a0a333200000000) // "\\x19Ethereum Signed Message:\
32"
            mstore(28, hash)
            res := keccak256(0, 60)
        }
    }
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 res) {
        // return keccak256(abi.encodePacked("\\x19\\x01", domainSeparator, structHash));
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, 0x1901000000000000000000000000000000000000000000000000000000000000) // "\\x19\\x01"
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            res := keccak256(ptr, 66)
        }
    }
}
// File @1inch/limit-order-protocol-contract/contracts/[email protected]
/**
 * @title OrderLib
 * @dev The library provides common functionality for processing and manipulating limit orders.
 * It provides functionality to calculate and verify order hashes, calculate trade amounts, and validate
 * extension data associated with orders. The library also contains helper methods to get the receiver of
 * an order and call getter functions.
 */
 library OrderLib {
    using AddressLib for Address;
    using MakerTraitsLib for MakerTraits;
    using ExtensionLib for bytes;
    /// @dev Error to be thrown when the extension data of an order is missing.
    error MissingOrderExtension();
    /// @dev Error to be thrown when the order has an unexpected extension.
    error UnexpectedOrderExtension();
    /// @dev Error to be thrown when the order extension hash is invalid.
    error InvalidExtensionHash();
    /// @dev The typehash of the order struct.
    bytes32 constant internal _LIMIT_ORDER_TYPEHASH = keccak256(
        "Order("
            "uint256 salt,"
            "address maker,"
            "address receiver,"
            "address makerAsset,"
            "address takerAsset,"
            "uint256 makingAmount,"
            "uint256 takingAmount,"
            "uint256 makerTraits"
        ")"
    );
    uint256 constant internal _ORDER_STRUCT_SIZE = 0x100;
    uint256 constant internal _DATA_HASH_SIZE = 0x120;
    /**
      * @notice Calculates the hash of an order.
      * @param order The order to be hashed.
      * @param domainSeparator The domain separator to be used for the EIP-712 hashing.
      * @return result The keccak256 hash of the order data.
      */
    function hash(IOrderMixin.Order calldata order, bytes32 domainSeparator) internal pure returns(bytes32 result) {
        bytes32 typehash = _LIMIT_ORDER_TYPEHASH;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // keccak256(abi.encode(_LIMIT_ORDER_TYPEHASH, order));
            mstore(ptr, typehash)
            calldatacopy(add(ptr, 0x20), order, _ORDER_STRUCT_SIZE)
            result := keccak256(ptr, _DATA_HASH_SIZE)
        }
        result = ECDSA.toTypedDataHash(domainSeparator, result);
    }
    /**
      * @notice Returns the receiver address for an order.
      * @param order The order.
      * @return receiver The address of the receiver, either explicitly defined in the order or the maker's address if not specified.
      */
    function getReceiver(IOrderMixin.Order calldata order) internal pure returns(address /*receiver*/) {
        address receiver = order.receiver.get();
        return receiver != address(0) ? receiver : order.maker.get();
    }
    /**
      * @notice Calculates the making amount based on the requested taking amount.
      * @dev If getter is specified in the extension data, the getter is called to calculate the making amount,
      * otherwise the making amount is calculated linearly.
      * @param order The order.
      * @param extension The extension data associated with the order.
      * @param requestedTakingAmount The amount the taker wants to take.
      * @param remainingMakingAmount The remaining amount of the asset left to fill.
      * @param orderHash The hash of the order.
      * @return makingAmount The amount of the asset the maker receives.
      */
    function calculateMakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        uint256 requestedTakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) internal view returns(uint256) {
        bytes calldata data = extension.makingAmountData();
        if (data.length == 0) {
            // Linear proportion
            return AmountCalculatorLib.getMakingAmount(order.makingAmount, order.takingAmount, requestedTakingAmount);
        }
        return IAmountGetter(address(bytes20(data))).getMakingAmount(
            order,
            extension,
            orderHash,
            msg.sender,
            requestedTakingAmount,
            remainingMakingAmount,
            data[20:]
        );
    }
    /**
      * @notice Calculates the taking amount based on the requested making amount.
      * @dev If getter is specified in the extension data, the getter is called to calculate the taking amount,
      * otherwise the taking amount is calculated linearly.
      * @param order The order.
      * @param extension The extension data associated with the order.
      * @param requestedMakingAmount The amount the maker wants to receive.
      * @param remainingMakingAmount The remaining amount of the asset left to be filled.
      * @param orderHash The hash of the order.
      * @return takingAmount The amount of the asset the taker takes.
      */
    function calculateTakingAmount(
        IOrderMixin.Order calldata order,
        bytes calldata extension,
        uint256 requestedMakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) internal view returns(uint256) {
        bytes calldata data = extension.takingAmountData();
        if (data.length == 0) {
            // Linear proportion
            return AmountCalculatorLib.getTakingAmount(order.makingAmount, order.takingAmount, requestedMakingAmount);
        }
        return IAmountGetter(address(bytes20(data))).getTakingAmount(
            order,
            extension,
            orderHash,
            msg.sender,
            requestedMakingAmount,
            remainingMakingAmount,
            data[20:]
        );
    }
    /**
      * @dev Validates the extension associated with an order.
      * @param order The order to validate against.
      * @param extension The extension associated with the order.
      * @return valid True if the extension is valid, false otherwise.
      * @return errorSelector The error selector if the extension is invalid, 0x00000000 otherwise.
      */
    function isValidExtension(IOrderMixin.Order calldata order, bytes calldata extension) internal pure returns(bool, bytes4) {
        if (order.makerTraits.hasExtension()) {
            if (extension.length == 0) return (false, MissingOrderExtension.selector);
            // Lowest 160 bits of the order salt must be equal to the lowest 160 bits of the extension hash
            if (uint256(keccak256(extension)) & type(uint160).max != order.salt & type(uint160).max) return (false, InvalidExtensionHash.selector);
        } else {
            if (extension.length > 0) return (false, UnexpectedOrderExtension.selector);
        }
        return (true, 0x00000000);
    }
}
// File @1inch/limit-order-protocol-contract/contracts/helpers/[email protected]
/// @title A helper contract for executing boolean functions on arbitrary target call results
contract PredicateHelper {
    error ArbitraryStaticCallFailed();
    /// @notice Calls every target with corresponding data
    /// @return Result True if call to any target returned True. Otherwise, false
    function or(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 previous;
        for (uint256 current; (current = uint32(offsets)) != 0; offsets >>= 32) {
            (bool success, uint256 res) = _staticcallForUint(address(this), data[previous:current]);
            if (success && res == 1) {
                return true;
            }
            previous = current;
        }
        return false;
    }
    /// @notice Calls every target with corresponding data
    /// @return Result True if calls to all targets returned True. Otherwise, false
    function and(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 previous;
        for (uint256 current; (current = uint32(offsets)) != 0; offsets >>= 32) {
            (bool success, uint256 res) = _staticcallForUint(address(this), data[previous:current]);
            if (!success || res != 1) {
                return false;
            }
            previous = current;
        }
        return true;
    }
    /// @notice Calls target with specified data and tests if it's equal to 0
    /// @return Result True if call to target returns 0. Otherwise, false
    function not(bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res == 0;
    }
    /// @notice Calls target with specified data and tests if it's equal to the value
    /// @param value Value to test
    /// @return Result True if call to target returns the same value as `value`. Otherwise, false
    function eq(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res == value;
    }
    /// @notice Calls target with specified data and tests if it's lower than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is lower than `value`. Otherwise, false
    function lt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res < value;
    }
    /// @notice Calls target with specified data and tests if it's bigger than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is bigger than `value`. Otherwise, false
    function gt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), data);
        return success && res > value;
    }
    /// @notice Performs an arbitrary call to target with data
    /// @return Result Bytes transmuted to uint256
    function arbitraryStaticCall(address target, bytes calldata data) public view returns(uint256) {
        (bool success, uint256 res) = _staticcallForUint(target, data);
        if (!success) revert ArbitraryStaticCallFailed();
        return res;
    }
    function _staticcallForUint(address target, bytes calldata data) internal view returns(bool success, uint256 res) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            calldatacopy(ptr, data.offset, data.length)
            success := staticcall(gas(), target, ptr, data.length, 0x0, 0x20)
            success := and(success, eq(returndatasize(), 32))
            if success {
                res := mload(0)
            }
        }
    }
}
// File @1inch/limit-order-protocol-contract/contracts/helpers/[email protected]
/// @title A helper contract to manage nonce with the series
contract SeriesEpochManager {
    error AdvanceEpochFailed();
    event EpochIncreased(address indexed maker, uint256 series, uint256 newEpoch);
    // {
    //    1: {
    //        '0x762f73Ad...842Ffa8': 0,
    //        '0xd20c41ee...32aaDe2': 1
    //    },
    //    2: {
    //        '0x762f73Ad...842Ffa8': 3,
    //        '0xd20c41ee...32aaDe2': 15
    //    },
    //    ...
    // }
    mapping(uint256 seriesId => uint256 epoch) private _epochs;
    /// @notice Returns nonce for `maker` and `series`
    function epoch(address maker, uint96 series) public view returns(uint256) {
        return _epochs[uint160(maker) | (uint256(series) << 160)];
    }
    /// @notice Advances nonce by one
    function increaseEpoch(uint96 series) external {
        advanceEpoch(series, 1);
    }
    /// @notice Advances nonce by specified amount
    function advanceEpoch(uint96 series, uint256 amount) public {
        if (amount == 0 || amount > 255) revert AdvanceEpochFailed();
        unchecked {
            uint256 key = uint160(msg.sender) | (uint256(series) << 160);
            uint256 newEpoch = _epochs[key] + amount;
            _epochs[key] = newEpoch;
            emit EpochIncreased(msg.sender, series, newEpoch);
        }
    }
    /// @notice Checks if `maker` has specified `makerEpoch` for `series`
    /// @return Result True if `maker` has specified epoch. Otherwise, false
    function epochEquals(address maker, uint256 series, uint256 makerEpoch) public view returns(bool) {
        return _epochs[uint160(maker) | (uint256(series) << 160)] == makerEpoch;
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
/**
 * @title BitInvalidatorLib
 * @dev The library provides a mechanism to invalidate objects based on a bit invalidator.
 * The bit invalidator holds a mapping where each key represents a slot number and each value contains an integer.
 * Each bit of the integer represents whether the object with corresponding index is valid or has been invalidated (0 - valid, 1 - invalidated).
 * The nonce given to access or invalidate an entity's state follows this structure:
 * - bits [0..7] represent the object state index in the slot.
 * - bits [8..255] represent the slot number (mapping key).
 */
library BitInvalidatorLib {
    /// @dev The error is thrown when an attempt is made to invalidate an already invalidated entity.
    error BitInvalidatedOrder();
    struct Data {
        mapping(uint256 slotIndex => uint256 slotData) _raw;
    }
    /**
     * @notice Retrieves the validity status of entities in a specific slot.
     * @dev Each bit in the returned value corresponds to the validity of an entity. 0 for valid, 1 for invalidated.
     * @param self The data structure.
     * @param nonce The nonce identifying the slot.
     * @return result The validity status of entities in the slot as a uint256.
     */
    function checkSlot(Data storage self, uint256 nonce) internal view returns(uint256) {
        uint256 invalidatorSlot = nonce >> 8;
        return self._raw[invalidatorSlot];
    }
    /**
     * @notice Checks the validity of a specific entity and invalidates it if valid.
     * @dev Throws an error if the entity has already been invalidated.
     * @param self The data structure.
     * @param nonce The nonce identifying the slot and the entity.
     */
    function checkAndInvalidate(Data storage self, uint256 nonce) internal {
        uint256 invalidatorSlot = nonce >> 8;
        uint256 invalidatorBit = 1 << (nonce & 0xff);
        uint256 invalidator = self._raw[invalidatorSlot];
        if (invalidator & invalidatorBit == invalidatorBit) revert BitInvalidatedOrder();
        self._raw[invalidatorSlot] = invalidator | invalidatorBit;
    }
    /**
     * @notice Invalidates multiple entities in a single slot.
     * @dev The entities to be invalidated are identified by setting their corresponding bits to 1 in a mask.
     * @param self The data structure.
     * @param nonce The nonce identifying the slot.
     * @param additionalMask A mask of bits to be invalidated.
     * @return result Resulting validity status of entities in the slot as a uint256.
     */
    function massInvalidate(Data storage self, uint256 nonce, uint256 additionalMask) internal returns(uint256 result) {
        uint256 invalidatorSlot = nonce >> 8;
        uint256 invalidatorBits = (1 << (nonce & 0xff)) | additionalMask;
        result = self._raw[invalidatorSlot] | invalidatorBits;
        self._raw[invalidatorSlot] = result;
    }
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
library Errors {
    error InvalidMsgValue();
    error ETHTransferFailed();
}
// File @1inch/limit-order-protocol-contract/contracts/libraries/[email protected]
type RemainingInvalidator is uint256;
/**
 * @title RemainingInvalidatorLib
 * @notice The library provides a mechanism to invalidate order based on the remaining amount of the order.
 * @dev The remaining amount is used as a nonce to invalidate the order.
 * When order is created, the remaining invalidator is 0.
 * When order is filled, the remaining invalidator is the inverse of the remaining amount.
 */
library RemainingInvalidatorLib {
    /// @dev The error is thrown when an attempt is made to invalidate an already invalidated entity.
    error RemainingInvalidatedOrder();
    /**
     * @notice Checks if an order is new based on the invalidator value.
     * @param invalidator The remaining invalidator of the order.
     * @return result Whether the order is new or not.
     */
    function isNewOrder(RemainingInvalidator invalidator) internal pure returns(bool) {
        return RemainingInvalidator.unwrap(invalidator) == 0;
    }
    /**
     * @notice Retrieves the remaining amount for an order.
     * @dev If the order is unknown, a RemainingInvalidatedOrder error is thrown.
     * @param invalidator The remaining invalidator for the order.
     * @return result The remaining amount for the order.
     */
    function remaining(RemainingInvalidator invalidator) internal pure returns(uint256) {
        uint256 value = RemainingInvalidator.unwrap(invalidator);
        if (value == 0) {
            revert RemainingInvalidatedOrder();
        }
        unchecked {
            return ~value;
        }
    }
    /**
     * @notice Calculates the remaining amount for an order.
     * @dev If the order is unknown, the order maker amount is returned.
     * @param invalidator The remaining invalidator for the order.
     * @param orderMakerAmount The amount to return if the order is new.
     * @return result The remaining amount for the order.
     */
    function remaining(RemainingInvalidator invalidator, uint256 orderMakerAmount) internal pure returns(uint256) {
        uint256 value = RemainingInvalidator.unwrap(invalidator);
        if (value == 0) {
            return orderMakerAmount;
        }
        unchecked {
            return ~value;
        }
    }
    /**
     * @notice Calculates the remaining invalidator of the order.
     * @param remainingMakingAmount The remaining making amount of the order.
     * @param makingAmount The making amount of the order.
     * @return result The remaining invalidator for the order.
     */
    function remains(uint256 remainingMakingAmount, uint256 makingAmount) internal pure returns(RemainingInvalidator) {
        unchecked {
            return RemainingInvalidator.wrap(~(remainingMakingAmount - makingAmount));
        }
    }
    /**
     * @notice Provides the remaining invalidator for a fully filled order.
     * @return result The remaining invalidator for a fully filled order.
     */
    function fullyFilled() internal pure returns(RemainingInvalidator) {
        return RemainingInvalidator.wrap(type(uint256).max);
    }
}
// File @openzeppelin/contracts/token/ERC20/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IWETH is IERC20 {
    event Deposit(address indexed dst, uint256 wad);
    event Withdrawal(address indexed src, uint256 wad);
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IDaiLikePermit {
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IPermit2 {
    struct PermitDetails {
        // ERC20 token address
        address token;
        // the maximum amount allowed to spend
        uint160 amount;
        // timestamp at which a spender's token allowances become invalid
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    /// @notice The permit message signed for a single token allownce
    struct PermitSingle {
        // the permit data for a single token alownce
        PermitDetails details;
        // address permissioned on the allowed tokens
        address spender;
        // deadline on the permit signature
        uint256 sigDeadline;
    }
    /// @notice Packed allowance
    struct PackedAllowance {
        // amount allowed
        uint160 amount;
        // permission expiry
        uint48 expiration;
        // an incrementing value indexed per owner,token,and spender for each signature
        uint48 nonce;
    }
    function transferFrom(address user, address spender, uint160 amount, address token) external;
    function permit(address owner, PermitSingle memory permitSingle, bytes calldata signature) external;
    function allowance(address user, address token, address spender) external view returns (PackedAllowance memory);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/// @title Revert reason forwarder.
library RevertReasonForwarder {
    /// @dev Forwards latest externall call revert.
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }
    /// @dev Returns latest external call revert reason.
    function reReason() internal pure returns (bytes memory reason) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            reason := mload(0x40)
            let length := returndatasize()
            mstore(reason, length)
            returndatacopy(add(reason, 0x20), 0, length)
            mstore(0x40, add(reason, add(0x20, length)))
        }
    }
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/**
 * @title Implements efficient safe methods for ERC20 interface.
 * @notice Compared to the standard ERC20, this implementation offers several enhancements:
 * 1. more gas-efficient, providing significant savings in transaction costs.
 * 2. support for different permit implementations
 * 3. forceApprove functionality
 * 4. support for WETH deposit and withdraw
 */
library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();
    error Permit2TransferAmountTooHigh();
    // Uniswap Permit2 address
    address private constant _PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
    bytes4 private constant _PERMIT_LENGTH_ERROR = 0x68275857;  // SafePermitBadLength.selector
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    /**
     * @notice Fetches the balance of a specific ERC20 token held by an account.
     * Consumes less gas then regular `ERC20.balanceOf`.
     * @dev Note that the implementation does not perform dirty bits cleaning, so it is the
     * responsibility of the caller to make sure that the higher 96 bits of the `account` parameter are clean.
     * @param token The IERC20 token contract for which the balance will be fetched.
     * @param account The address of the account whose token balance will be fetched.
     * @return tokenBalance The balance of the specified ERC20 token held by the account.
     */
    function safeBalanceOf(
        IERC20 token,
        address account
    ) internal view returns(uint256 tokenBalance) {
        bytes4 selector = IERC20.balanceOf.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            mstore(0x00, selector)
            mstore(0x04, account)
            let success := staticcall(gas(), token, 0x00, 0x24, 0x00, 0x20)
            tokenBalance := mload(0)
            if or(iszero(success), lt(returndatasize(), 0x20)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another.
     * @dev If permit2 is true, uses the Permit2 standard; otherwise uses the standard ERC20 transferFrom.
     * Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     * @param permit2 If true, uses the Permit2 standard for the transfer; otherwise uses the standard ERC20 transferFrom.
     */
    function safeTransferFromUniversal(
        IERC20 token,
        address from,
        address to,
        uint256 amount,
        bool permit2
    ) internal {
        if (permit2) {
            safeTransferFromPermit2(token, from, to, amount);
        } else {
            safeTransferFrom(token, from, to, amount);
        }
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another using the ERC20 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    /**
     * @notice Attempts to safely transfer tokens from one address to another using the Permit2 standard.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `from` and `to` parameters are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param from The address from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param amount The amount of tokens to transfer.
     */
    function safeTransferFromPermit2(
        IERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        if (amount > type(uint160).max) revert Permit2TransferAmountTooHigh();
        bytes4 selector = IPermit2.transferFrom.selector;
        bool success;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            mstore(add(data, 0x64), token)
            success := call(gas(), _PERMIT2, 0, data, 0x84, 0x0, 0x0)
            if success {
                success := gt(extcodesize(_PERMIT2), 0)
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    /**
     * @notice Attempts to safely transfer tokens to another address.
     * @dev Either requires `true` in return data, or requires target to be smart-contract and empty return data.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `to` parameter are clean.
     * @param token The IERC20 token contract from which the tokens will be transferred.
     * @param to The address to which the tokens will be transferred.
     * @param value The amount of tokens to transfer.
     */
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }
    /**
     * @notice Attempts to approve a spender to spend a certain amount of tokens.
     * @dev If `approve(from, to, amount)` fails, it tries to set the allowance to zero, and retries the `approve` call.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function forceApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (
                !_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value)
            ) {
                revert ForceApproveFailed();
            }
        }
    }
    /**
     * @notice Safely increases the allowance of a spender.
     * @dev Increases with safe math check. Checks if the increased allowance will overflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to increase the allowance by.
     */
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }
    /**
     * @notice Safely decreases the allowance of a spender.
     * @dev Decreases with safe math check. Checks if the decreased allowance will underflow, if yes, then it reverts the transaction.
     * Then uses `forceApprove` to increase the allowance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `spender` parameter are clean.
     * @param token The IERC20 token contract on which the call will be made.
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to decrease the allowance by.
     */
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, bytes calldata permit) internal {
        if (!tryPermit(token, msg.sender, address(this), permit)) RevertReasonForwarder.reRevert();
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with custom owner and spender parameters.
     * Permit type is determined automatically based on permit calldata (IERC20Permit, IDaiLikePermit, and IPermit2).
     * @dev Wraps `tryPermit` function and forwards revert reason if permit fails.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The IERC20 token to execute the permit function on.
     * @param owner The owner of the tokens for which the permit is made.
     * @param spender The spender allowed to spend the tokens by the permit.
     * @param permit The permit data to be used in the function call.
     */
    function safePermit(IERC20 token, address owner, address spender, bytes calldata permit) internal {
        if (!tryPermit(token, owner, spender, permit)) RevertReasonForwarder.reRevert();
    }
    /**
     * @notice Attempts to execute the `permit` function on the provided token with the sender and contract as parameters.
     * @dev Invokes `tryPermit` with sender as owner and contract as spender.
     * @param token The IERC20 token to execute the permit function on.
     * @param permit The permit data to be used in the function call.
     * @return success Returns true if the permit function was successfully executed, false otherwise.
     */
    function tryPermit(IERC20 token, bytes calldata permit) internal returns(bool success) {
        return tryPermit(token, msg.sender, address(this), permit);
    }
    /**
     * @notice The function attempts to call the permit function on a given ERC20 token.
     * @dev The function is designed to support a variety of permit functions, namely: IERC20Permit, IDaiLikePermit, and IPermit2.
     * It accommodates both Compact and Full formats of these permit types.
     * Please note, it is expected that the `expiration` parameter for the compact Permit2 and the `deadline` parameter
     * for the compact Permit are to be incremented by one before invoking this function. This approach is motivated by
     * gas efficiency considerations; as the unlimited expiration period is likely to be the most common scenario, and
     * zeros are cheaper to pass in terms of gas cost. Thus, callers should increment the expiration or deadline by one
     * before invocation for optimized performance.
     * Note that the implementation does not perform dirty bits cleaning, so it is the responsibility of
     * the caller to make sure that the higher 96 bits of the `owner` and `spender` parameters are clean.
     * @param token The address of the ERC20 token on which to call the permit function.
     * @param owner The owner of the tokens. This address should have signed the off-chain permit.
     * @param spender The address which will be approved for transfer of tokens.
     * @param permit The off-chain permit data, containing different fields depending on the type of permit function.
     * @return success A boolean indicating whether the permit call was successful.
     */
    function tryPermit(IERC20 token, address owner, address spender, bytes calldata permit) internal returns(bool success) {
        // load function selectors for different permit standards
        bytes4 permitSelector = IERC20Permit.permit.selector;
        bytes4 daiPermitSelector = IDaiLikePermit.permit.selector;
        bytes4 permit2Selector = IPermit2.permit.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            // Switch case for different permit lengths, indicating different permit standards
            switch permit.length
            // Compact IERC20Permit
            case 100 {
                mstore(ptr, permitSelector)     // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender
                // Compact IERC20Permit.permit(uint256 value, uint32 deadline, uint256 r, uint256 vs)
                {  // stack too deep
                    let deadline := shr(224, calldataload(add(permit.offset, 0x20))) // loads permit.offset 0x20..0x23
                    let vs := calldataload(add(permit.offset, 0x44))                 // loads permit.offset 0x44..0x63
                    calldatacopy(add(ptr, 0x44), permit.offset, 0x20)            // store value     = copy permit.offset 0x00..0x19
                    mstore(add(ptr, 0x64), sub(deadline, 1))                     // store deadline  = deadline - 1
                    mstore(add(ptr, 0x84), add(27, shr(255, vs)))                // store v         = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xa4), add(permit.offset, 0x24), 0x20) // store r         = copy permit.offset 0x24..0x43
                    mstore(add(ptr, 0xc4), shr(1, shl(1, vs)))                   // store s         = vs without most significant bit
                }
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // Compact IDaiLikePermit
            case 72 {
                mstore(ptr, daiPermitSelector)  // store selector
                mstore(add(ptr, 0x04), owner)   // store owner
                mstore(add(ptr, 0x24), spender) // store spender
                // Compact IDaiLikePermit.permit(uint32 nonce, uint32 expiry, uint256 r, uint256 vs)
                {  // stack too deep
                    let expiry := shr(224, calldataload(add(permit.offset, 0x04))) // loads permit.offset 0x04..0x07
                    let vs := calldataload(add(permit.offset, 0x28))               // loads permit.offset 0x28..0x47
                    mstore(add(ptr, 0x44), shr(224, calldataload(permit.offset))) // store nonce   = copy permit.offset 0x00..0x03
                    mstore(add(ptr, 0x64), sub(expiry, 1))                        // store expiry  = expiry - 1
                    mstore(add(ptr, 0x84), true)                                  // store allowed = true
                    mstore(add(ptr, 0xa4), add(27, shr(255, vs)))                 // store v       = most significant bit of vs + 27 (27 or 28)
                    calldatacopy(add(ptr, 0xc4), add(permit.offset, 0x08), 0x20)  // store r       = copy permit.offset 0x08..0x27
                    mstore(add(ptr, 0xe4), shr(1, shl(1, vs)))                    // store s       = vs without most significant bit
                }
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // IERC20Permit
            case 224 {
                mstore(ptr, permitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IERC20Permit.permit(address owner, address spender, uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0xe4, 0, 0)
            }
            // IDaiLikePermit
            case 256 {
                mstore(ptr, daiPermitSelector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IDaiLikePermit.permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s)
                success := call(gas(), token, 0, ptr, 0x104, 0, 0)
            }
            // Compact IPermit2
            case 96 {
                // Compact IPermit2.permit(uint160 amount, uint32 expiration, uint32 nonce, uint32 sigDeadline, uint256 r, uint256 vs)
                mstore(ptr, permit2Selector)  // store selector
                mstore(add(ptr, 0x04), owner) // store owner
                mstore(add(ptr, 0x24), token) // store token
                calldatacopy(add(ptr, 0x50), permit.offset, 0x14)             // store amount = copy permit.offset 0x00..0x13
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0x64), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x14))), 1))) // store expiration = ((permit.offset 0x14..0x17 - 1) & 0xffffffffffff)
                mstore(add(ptr, 0x84), shr(224, calldataload(add(permit.offset, 0x18)))) // store nonce = copy permit.offset 0x18..0x1b
                mstore(add(ptr, 0xa4), spender)                               // store spender
                // and(0xffffffffffff, ...) - conversion to uint48
                mstore(add(ptr, 0xc4), and(0xffffffffffff, sub(shr(224, calldataload(add(permit.offset, 0x1c))), 1))) // store sigDeadline = ((permit.offset 0x1c..0x1f - 1) & 0xffffffffffff)
                mstore(add(ptr, 0xe4), 0x100)                                 // store offset = 256
                mstore(add(ptr, 0x104), 0x40)                                 // store length = 64
                calldatacopy(add(ptr, 0x124), add(permit.offset, 0x20), 0x20) // store r      = copy permit.offset 0x20..0x3f
                calldatacopy(add(ptr, 0x144), add(permit.offset, 0x40), 0x20) // store vs     = copy permit.offset 0x40..0x5f
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // IPermit2
            case 352 {
                mstore(ptr, permit2Selector)
                calldatacopy(add(ptr, 0x04), permit.offset, permit.length) // copy permit calldata
                // IPermit2.permit(address owner, PermitSingle calldata permitSingle, bytes calldata signature)
                success := call(gas(), _PERMIT2, 0, ptr, 0x164, 0, 0)
            }
            // Unknown
            default {
                mstore(ptr, _PERMIT_LENGTH_ERROR)
                revert(ptr, 4)
            }
        }
    }
    /**
     * @dev Executes a low level call to a token contract, making it resistant to reversion and erroneous boolean returns.
     * @param token The IERC20 token contract on which the call will be made.
     * @param selector The function signature that is to be called on the token contract.
     * @param to The address to which the token amount will be transferred.
     * @param amount The token amount to be transferred.
     * @return success A boolean indicating if the call was successful. Returns 'true' on success and 'false' on failure.
     * In case of success but no returned data, validates that the contract code exists.
     * In case of returned data, ensures that it's a boolean `true`.
     */
    function _makeCall(
        IERC20 token,
        bytes4 selector,
        address to,
        uint256 amount
    ) private returns (bool success) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 {
                    success := gt(extcodesize(token), 0)
                }
                default {
                    success := and(gt(returndatasize(), 31), eq(mload(0), 1))
                }
            }
        }
    }
    /**
     * @notice Safely deposits a specified amount of Ether into the IWETH contract. Consumes less gas then regular `IWETH.deposit`.
     * @param weth The IWETH token contract.
     * @param amount The amount of Ether to deposit into the IWETH contract.
     */
    function safeDeposit(IWETH weth, uint256 amount) internal {
        if (amount > 0) {
            bytes4 selector = IWETH.deposit.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                mstore(0, selector)
                if iszero(call(gas(), weth, amount, 0, 4, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract. Consumes less gas then regular `IWETH.withdraw`.
     * @dev Uses inline assembly to interact with the IWETH contract.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     */
    function safeWithdraw(IWETH weth, uint256 amount) internal {
        bytes4 selector = IWETH.withdraw.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            mstore(0, selector)
            mstore(4, amount)
            if iszero(call(gas(), weth, 0, 0, 0x24, 0, 0)) {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /**
     * @notice Safely withdraws a specified amount of wrapped Ether from the IWETH contract to a specified recipient.
     * Consumes less gas then regular `IWETH.withdraw`.
     * @param weth The IWETH token contract.
     * @param amount The amount of wrapped Ether to withdraw from the IWETH contract.
     * @param to The recipient of the withdrawn Ether.
     */
    function safeWithdrawTo(IWETH weth, uint256 amount, address to) internal {
        safeWithdraw(weth, amount);
        if (to != address(this)) {
            assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
                if iszero(call(_RAW_CALL_GAS_LIMIT, to, amount, 0, 0, 0, 0)) {
                    let ptr := mload(0x40)
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
    }
}
// File @1inch/solidity-utils/contracts/[email protected]
abstract contract EthReceiver {
    error EthDepositRejected();
    receive() external payable {
        _receive();
    }
    function _receive() internal virtual {
        // solhint-disable-next-line avoid-tx-origin
        if (msg.sender == tx.origin) revert EthDepositRejected();
    }
}
// File @1inch/solidity-utils/contracts/[email protected]
abstract contract OnlyWethReceiver is EthReceiver {
    address private immutable _WETH; // solhint-disable-line var-name-mixedcase
    constructor(address weth) {
        _WETH = address(weth);
    }
    function _receive() internal virtual override {
        if (msg.sender != _WETH) revert EthDepositRejected();
    }
}
// File @1inch/solidity-utils/contracts/[email protected]
abstract contract PermitAndCall {
    using SafeERC20 for IERC20;
    function permitAndCall(bytes calldata permit, bytes calldata action) external payable {
        IERC20(address(bytes20(permit))).tryPermit(permit[20:]);
        // solhint-disable-next-line no-inline-assembly
        assembly ("memory-safe") {
            let ptr := mload(0x40)
            calldatacopy(ptr, action.offset, action.length)
            let success := delegatecall(gas(), address(), ptr, action.length, 0, 0)
            returndatacopy(ptr, 0, returndatasize())
            switch success
            case 0 {
                revert(ptr, returndatasize())
            }
            default {
                return(ptr, returndatasize())
            }
        }
    }
}
// File @openzeppelin/contracts/interfaces/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)
interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();
    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}
// File @openzeppelin/contracts/utils/math/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.
            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }
    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}
// File @openzeppelin/contracts/utils/math/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)
/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }
    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;
    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }
    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }
    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }
    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}
// File @openzeppelin/contracts/utils/cryptography/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\\x19Ethereum Signed Message:\
32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\\x19Ethereum Signed Message:\
32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\\x19Ethereum Signed Message:\
" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\\x19Ethereum Signed Message:\
", bytes(Strings.toString(message.length)), message));
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\\x19\\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    struct StringSlot {
        string value;
    }
    struct BytesSlot {
        bytes value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ShortStrings.sol)
// | string  | 0xAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA   |
// | length  | 0x                                                              BB |
type ShortString is bytes32;
/**
 * @dev This library provides functions to convert short memory strings
 * into a `ShortString` type that can be used as an immutable variable.
 *
 * Strings of arbitrary length can be optimized using this library if
 * they are short enough (up to 31 bytes) by packing them with their
 * length (1 byte) in a single EVM word (32 bytes). Additionally, a
 * fallback mechanism can be used for every other case.
 *
 * Usage example:
 *
 * ```solidity
 * contract Named {
 *     using ShortStrings for *;
 *
 *     ShortString private immutable _name;
 *     string private _nameFallback;
 *
 *     constructor(string memory contractName) {
 *         _name = contractName.toShortStringWithFallback(_nameFallback);
 *     }
 *
 *     function name() external view returns (string memory) {
 *         return _name.toStringWithFallback(_nameFallback);
 *     }
 * }
 * ```
 */
library ShortStrings {
    // Used as an identifier for strings longer than 31 bytes.
    bytes32 private constant FALLBACK_SENTINEL = 0x00000000000000000000000000000000000000000000000000000000000000FF;
    error StringTooLong(string str);
    error InvalidShortString();
    /**
     * @dev Encode a string of at most 31 chars into a `ShortString`.
     *
     * This will trigger a `StringTooLong` error is the input string is too long.
     */
    function toShortString(string memory str) internal pure returns (ShortString) {
        bytes memory bstr = bytes(str);
        if (bstr.length > 31) {
            revert StringTooLong(str);
        }
        return ShortString.wrap(bytes32(uint256(bytes32(bstr)) | bstr.length));
    }
    /**
     * @dev Decode a `ShortString` back to a "normal" string.
     */
    function toString(ShortString sstr) internal pure returns (string memory) {
        uint256 len = byteLength(sstr);
        // using `new string(len)` would work locally but is not memory safe.
        string memory str = new string(32);
        /// @solidity memory-safe-assembly
        assembly {
            mstore(str, len)
            mstore(add(str, 0x20), sstr)
        }
        return str;
    }
    /**
     * @dev Return the length of a `ShortString`.
     */
    function byteLength(ShortString sstr) internal pure returns (uint256) {
        uint256 result = uint256(ShortString.unwrap(sstr)) & 0xFF;
        if (result > 31) {
            revert InvalidShortString();
        }
        return result;
    }
    /**
     * @dev Encode a string into a `ShortString`, or write it to storage if it is too long.
     */
    function toShortStringWithFallback(string memory value, string storage store) internal returns (ShortString) {
        if (bytes(value).length < 32) {
            return toShortString(value);
        } else {
            StorageSlot.getStringSlot(store).value = value;
            return ShortString.wrap(FALLBACK_SENTINEL);
        }
    }
    /**
     * @dev Decode a string that was encoded to `ShortString` or written to storage using {setWithFallback}.
     */
    function toStringWithFallback(ShortString value, string storage store) internal pure returns (string memory) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return toString(value);
        } else {
            return store;
        }
    }
    /**
     * @dev Return the length of a string that was encoded to `ShortString` or written to storage using
     * {setWithFallback}.
     *
     * WARNING: This will return the "byte length" of the string. This may not reflect the actual length in terms of
     * actual characters as the UTF-8 encoding of a single character can span over multiple bytes.
     */
    function byteLengthWithFallback(ShortString value, string storage store) internal view returns (uint256) {
        if (ShortString.unwrap(value) != FALLBACK_SENTINEL) {
            return byteLength(value);
        } else {
            return bytes(store).length;
        }
    }
}
// File @openzeppelin/contracts/utils/cryptography/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)
/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 *
 * @custom:oz-upgrades-unsafe-allow state-variable-immutable
 */
abstract contract EIP712 is IERC5267 {
    using ShortStrings for *;
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _cachedDomainSeparator;
    uint256 private immutable _cachedChainId;
    address private immutable _cachedThis;
    bytes32 private immutable _hashedName;
    bytes32 private immutable _hashedVersion;
    ShortString private immutable _name;
    ShortString private immutable _version;
    string private _nameFallback;
    string private _versionFallback;
    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        _name = name.toShortStringWithFallback(_nameFallback);
        _version = version.toShortStringWithFallback(_versionFallback);
        _hashedName = keccak256(bytes(name));
        _hashedVersion = keccak256(bytes(version));
        _cachedChainId = block.chainid;
        _cachedDomainSeparator = _buildDomainSeparator();
        _cachedThis = address(this);
    }
    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _cachedThis && block.chainid == _cachedChainId) {
            return _cachedDomainSeparator;
        } else {
            return _buildDomainSeparator();
        }
    }
    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _hashedName, _hashedVersion, block.chainid, address(this)));
    }
    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _name which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Name() internal view returns (string memory) {
        return _name.toStringWithFallback(_nameFallback);
    }
    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: By default this function reads _version which is an immutable value.
     * It only reads from storage if necessary (in case the value is too large to fit in a ShortString).
     */
    // solhint-disable-next-line func-name-mixedcase
    function _EIP712Version() internal view returns (string memory) {
        return _version.toStringWithFallback(_versionFallback);
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
// File @openzeppelin/contracts/utils/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    bool private _paused;
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();
    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor() {
        _paused = false;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }
    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// File @1inch/limit-order-protocol-contract/contracts/[email protected]
/// @title Limit Order mixin
abstract contract OrderMixin is IOrderMixin, EIP712, PredicateHelper, SeriesEpochManager, Pausable, OnlyWethReceiver, PermitAndCall {
    using SafeERC20 for IERC20;
    using SafeERC20 for IWETH;
    using OrderLib for IOrderMixin.Order;
    using ExtensionLib for bytes;
    using AddressLib for Address;
    using MakerTraitsLib for MakerTraits;
    using TakerTraitsLib for TakerTraits;
    using BitInvalidatorLib for BitInvalidatorLib.Data;
    using RemainingInvalidatorLib for RemainingInvalidator;
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    mapping(address maker => BitInvalidatorLib.Data data) private _bitInvalidator;
    mapping(address maker => mapping(bytes32 orderHash => RemainingInvalidator remaining)) private _remainingInvalidator;
    constructor(IWETH weth) OnlyWethReceiver(address(weth)) {
        _WETH = weth;
    }
    /**
     * @notice See {IOrderMixin-bitInvalidatorForOrder}.
     */
    function bitInvalidatorForOrder(address maker, uint256 slot) external view returns(uint256 /* result */) {
        return _bitInvalidator[maker].checkSlot(slot);
    }
    /**
     * @notice See {IOrderMixin-remainingInvalidatorForOrder}.
     */
    function remainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 /* remaining */) {
        return _remainingInvalidator[maker][orderHash].remaining();
    }
    /**
     * @notice See {IOrderMixin-rawRemainingInvalidatorForOrder}.
     */
    function rawRemainingInvalidatorForOrder(address maker, bytes32 orderHash) external view returns(uint256 /* remainingRaw */) {
        return RemainingInvalidator.unwrap(_remainingInvalidator[maker][orderHash]);
    }
    /**
     * @notice See {IOrderMixin-simulate}.
     */
    function simulate(address target, bytes calldata data) external {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory result) = target.delegatecall(data);
        revert SimulationResults(success, result);
    }
    /**
     * @notice See {IOrderMixin-cancelOrder}.
     */
    function cancelOrder(MakerTraits makerTraits, bytes32 orderHash) public {
        if (makerTraits.useBitInvalidator()) {
            uint256 invalidator = _bitInvalidator[msg.sender].massInvalidate(makerTraits.nonceOrEpoch(), 0);
            emit BitInvalidatorUpdated(msg.sender, makerTraits.nonceOrEpoch() >> 8, invalidator);
        } else {
            _remainingInvalidator[msg.sender][orderHash] = RemainingInvalidatorLib.fullyFilled();
            emit OrderCancelled(orderHash);
        }
    }
    /**
     * @notice See {IOrderMixin-cancelOrders}.
     */
    function cancelOrders(MakerTraits[] calldata makerTraits, bytes32[] calldata orderHashes) external {
        if (makerTraits.length != orderHashes.length) revert MismatchArraysLengths();
        unchecked {
            for (uint256 i = 0; i < makerTraits.length; i++) {
                cancelOrder(makerTraits[i], orderHashes[i]);
            }
        }
    }
    /**
     * @notice See {IOrderMixin-bitsInvalidateForOrder}.
     */
    function bitsInvalidateForOrder(MakerTraits makerTraits, uint256 additionalMask) external {
        if (!makerTraits.useBitInvalidator()) revert OrderIsNotSuitableForMassInvalidation();
        uint256 invalidator = _bitInvalidator[msg.sender].massInvalidate(makerTraits.nonceOrEpoch(), additionalMask);
        emit BitInvalidatorUpdated(msg.sender, makerTraits.nonceOrEpoch() >> 8, invalidator);
    }
     /**
     * @notice See {IOrderMixin-hashOrder}.
     */
    function hashOrder(IOrderMixin.Order calldata order) external view returns(bytes32) {
        return order.hash(_domainSeparatorV4());
    }
    /**
     * @notice See {IOrderMixin-checkPredicate}.
     */
    function checkPredicate(bytes calldata predicate) public view returns(bool) {
        (bool success, uint256 res) = _staticcallForUint(address(this), predicate);
        return success && res == 1;
    }
    /**
     * @notice See {IOrderMixin-fillOrder}.
     */
    function fillOrder(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits
    ) external payable returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        return _fillOrder(order, r, vs, amount, takerTraits, msg.sender, msg.data[:0], msg.data[:0]);
    }
    /**
     * @notice See {IOrderMixin-fillOrderArgs}.
     */
    function fillOrderArgs(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external payable returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        (
            address target,
            bytes calldata extension,
            bytes calldata interaction
        ) = _parseArgs(takerTraits, args);
        return _fillOrder(order, r, vs, amount, takerTraits, target, extension, interaction);
    }
    function _fillOrder(
        IOrderMixin.Order calldata order,
        bytes32 r,
        bytes32 vs,
        uint256 amount,
        TakerTraits takerTraits,
        address target,
        bytes calldata extension,
        bytes calldata interaction
    ) private returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash) {
        // Check signature and apply order/maker permit only on the first fill
        orderHash = order.hash(_domainSeparatorV4());
        uint256 remainingMakingAmount = _checkRemainingMakingAmount(order, orderHash);
        if (remainingMakingAmount == order.makingAmount) {
            address maker = order.maker.get();
            if (maker == address(0) || maker != ECDSA.recover(orderHash, r, vs)) revert BadSignature();
            if (!takerTraits.skipMakerPermit()) {
                bytes calldata makerPermit = extension.makerPermit();
                if (makerPermit.length >= 20) {
                    // proceed only if taker is willing to execute permit and its length is enough to store address
                    IERC20(address(bytes20(makerPermit))).tryPermit(maker, address(this), makerPermit[20:]);
                    if (!order.makerTraits.useBitInvalidator()) {
                        // Bit orders are not subjects for reentrancy, but we still need to check remaining-based orders for reentrancy
                        if (!_remainingInvalidator[order.maker.get()][orderHash].isNewOrder()) revert ReentrancyDetected();
                    }
                }
            }
        }
        (makingAmount, takingAmount) = _fill(order, orderHash, remainingMakingAmount, amount, takerTraits, target, extension, interaction);
    }
    /**
     * @notice See {IOrderMixin-fillContractOrder}.
     */
    function fillContractOrder(
        IOrderMixin.Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits
    ) external returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        return _fillContractOrder(order, signature, amount, takerTraits, msg.sender, msg.data[:0], msg.data[:0]);
    }
    /**
     * @notice See {IOrderMixin-fillContractOrderArgs}.
     */
    function fillContractOrderArgs(
        IOrderMixin.Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        bytes calldata args
    ) external returns(uint256 /* makingAmount */, uint256 /* takingAmount */, bytes32 /* orderHash */) {
        (
            address target,
            bytes calldata extension,
            bytes calldata interaction
        ) = _parseArgs(takerTraits, args);
        return _fillContractOrder(order, signature, amount, takerTraits, target, extension, interaction);
    }
    function _fillContractOrder(
        IOrderMixin.Order calldata order,
        bytes calldata signature,
        uint256 amount,
        TakerTraits takerTraits,
        address target,
        bytes calldata extension,
        bytes calldata interaction
    ) private returns(uint256 makingAmount, uint256 takingAmount, bytes32 orderHash) {
        // Check signature only on the first fill
        orderHash = order.hash(_domainSeparatorV4());
        uint256 remainingMakingAmount = _checkRemainingMakingAmount(order, orderHash);
        if (remainingMakingAmount == order.makingAmount) {
            if (!ECDSA.isValidSignature(order.maker.get(), orderHash, signature)) revert BadSignature();
        }
        (makingAmount, takingAmount) = _fill(order, orderHash, remainingMakingAmount, amount, takerTraits, target, extension, interaction);
    }
    /**
      * @notice Fills an order and transfers making amount to a specified target.
      * @dev If the target is zero assigns it the caller's address.
      * The function flow is as follows:
      * 1. Validate order
      * 2. Call maker pre-interaction
      * 3. Transfer maker asset to taker
      * 4. Call taker interaction
      * 5. Transfer taker asset to maker
      * 5. Call maker post-interaction
      * 6. Emit OrderFilled event
      * @param order The order details.
      * @param orderHash The hash of the order.
      * @param extension The extension calldata of the order.
      * @param remainingMakingAmount The remaining amount to be filled.
      * @param amount The order amount.
      * @param takerTraits The taker preferences for the order.
      * @param target The address to which the order is filled.
      * @param interaction The interaction calldata.
      * @return makingAmount The computed amount that the maker will get.
      * @return takingAmount The computed amount that the taker will send.
      */
    function _fill(
        IOrderMixin.Order calldata order,
        bytes32 orderHash,
        uint256 remainingMakingAmount,
        uint256 amount,
        TakerTraits takerTraits,
        address target,
        bytes calldata extension,
        bytes calldata interaction
    ) private whenNotPaused() returns(uint256 makingAmount, uint256 takingAmount) {
        // Validate order
        {
            (bool valid, bytes4 validationResult) = order.isValidExtension(extension);
            if (!valid) {
                // solhint-disable-next-line no-inline-assembly
                assembly ("memory-safe") {
                    mstore(0, validationResult)
                    revert(0, 4)
                }
            }
        }
        if (!order.makerTraits.isAllowedSender(msg.sender)) revert PrivateOrder();
        if (order.makerTraits.isExpired()) revert OrderExpired();
        if (order.makerTraits.needCheckEpochManager()) {
            if (order.makerTraits.useBitInvalidator()) revert EpochManagerAndBitInvalidatorsAreIncompatible();
            if (!epochEquals(order.maker.get(), order.makerTraits.series(), order.makerTraits.nonceOrEpoch())) revert WrongSeriesNonce();
        }
        // Check if orders predicate allows filling
        if (extension.length > 0) {
            bytes calldata predicate = extension.predicate();
            if (predicate.length > 0) {
                if (!checkPredicate(predicate)) revert PredicateIsNotTrue();
            }
        }
        // Compute maker and taker assets amount
        if (takerTraits.isMakingAmount()) {
            makingAmount = Math.min(amount, remainingMakingAmount);
            takingAmount = order.calculateTakingAmount(extension, makingAmount, remainingMakingAmount, orderHash);
            uint256 threshold = takerTraits.threshold();
            if (threshold > 0) {
                // Check rate: takingAmount / makingAmount <= threshold / amount
                if (amount == makingAmount) {  // Gas optimization, no SafeMath.mul()
                    if (takingAmount > threshold) revert TakingAmountTooHigh();
                } else {
                    if (takingAmount * amount > threshold * makingAmount) revert TakingAmountTooHigh();
                }
            }
        }
        else {
            takingAmount = amount;
            makingAmount = order.calculateMakingAmount(extension, takingAmount, remainingMakingAmount, orderHash);
            if (makingAmount > remainingMakingAmount) {
                // Try to decrease taking amount because computed making amount exceeds remaining amount
                makingAmount = remainingMakingAmount;
                takingAmount = order.calculateTakingAmount(extension, makingAmount, remainingMakingAmount, orderHash);
                if (takingAmount > amount) revert TakingAmountExceeded();
            }
            uint256 threshold = takerTraits.threshold();
            if (threshold > 0) {
                // Check rate: makingAmount / takingAmount >= threshold / amount
                if (amount == takingAmount) { // Gas optimization, no SafeMath.mul()
                    if (makingAmount < threshold) revert MakingAmountTooLow();
                } else {
                    if (makingAmount * amount < threshold * takingAmount) revert MakingAmountTooLow();
                }
            }
        }
        if (!order.makerTraits.allowPartialFills() && makingAmount != order.makingAmount) revert PartialFillNotAllowed();
        unchecked { if (makingAmount * takingAmount == 0) revert SwapWithZeroAmount(); }
        // Invalidate order depending on makerTraits
        if (order.makerTraits.useBitInvalidator()) {
            _bitInvalidator[order.maker.get()].checkAndInvalidate(order.makerTraits.nonceOrEpoch());
        } else {
            _remainingInvalidator[order.maker.get()][orderHash] = RemainingInvalidatorLib.remains(remainingMakingAmount, makingAmount);
        }
        // Pre interaction, where maker can prepare funds interactively
        if (order.makerTraits.needPreInteractionCall()) {
            bytes calldata data = extension.preInteractionTargetAndData();
            address listener = order.maker.get();
            if (data.length > 19) {
                listener = address(bytes20(data));
                data = data[20:];
            }
            IPreInteraction(listener).preInteraction(
                order, extension, orderHash, msg.sender, makingAmount, takingAmount, remainingMakingAmount, data
            );
        }
        // Maker => Taker
        {
            bool needUnwrap = order.makerAsset.get() == address(_WETH) && takerTraits.unwrapWeth();
            address receiver = needUnwrap ? address(this) : target;
            if (order.makerTraits.usePermit2()) {
                if (extension.makerAssetSuffix().length > 0) revert InvalidPermit2Transfer();
                IERC20(order.makerAsset.get()).safeTransferFromPermit2(order.maker.get(), receiver, makingAmount);
            } else {
                if (!_callTransferFromWithSuffix(
                    order.makerAsset.get(),
                    order.maker.get(),
                    receiver,
                    makingAmount,
                    extension.makerAssetSuffix()
                )) revert TransferFromMakerToTakerFailed();
            }
            if (needUnwrap) {
                _WETH.safeWithdrawTo(makingAmount, target);
            }
        }
        if (interaction.length > 19) {
            // proceed only if interaction length is enough to store address
            ITakerInteraction(address(bytes20(interaction))).takerInteraction(
                order, extension, orderHash, msg.sender, makingAmount, takingAmount, remainingMakingAmount, interaction[20:]
            );
        }
        // Taker => Maker
        if (order.takerAsset.get() == address(_WETH) && msg.value > 0) {
            if (msg.value < takingAmount) revert Errors.InvalidMsgValue();
            if (msg.value > takingAmount) {
                unchecked {
                    // solhint-disable-next-line avoid-low-level-calls
                    (bool success, ) = msg.sender.call{value: msg.value - takingAmount}("");
                    if (!success) revert Errors.ETHTransferFailed();
                }
            }
            if (order.makerTraits.unwrapWeth()) {
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = order.getReceiver().call{value: takingAmount}("");
                if (!success) revert Errors.ETHTransferFailed();
            } else {
                _WETH.safeDeposit(takingAmount);
                _WETH.safeTransfer(order.getReceiver(), takingAmount);
            }
        } else {
            if (msg.value != 0) revert Errors.InvalidMsgValue();
            bool needUnwrap = order.takerAsset.get() == address(_WETH) && order.makerTraits.unwrapWeth();
            address receiver = needUnwrap ? address(this) : order.getReceiver();
            if (takerTraits.usePermit2()) {
                if (extension.takerAssetSuffix().length > 0) revert InvalidPermit2Transfer();
                IERC20(order.takerAsset.get()).safeTransferFromPermit2(msg.sender, receiver, takingAmount);
            } else {
                if (!_callTransferFromWithSuffix(
                    order.takerAsset.get(),
                    msg.sender,
                    receiver,
                    takingAmount,
                    extension.takerAssetSuffix()
                )) revert TransferFromTakerToMakerFailed();
            }
            if (needUnwrap) {
                _WETH.safeWithdrawTo(takingAmount, order.getReceiver());
            }
        }
        // Post interaction, where maker can handle funds interactively
        if (order.makerTraits.needPostInteractionCall()) {
            bytes calldata data = extension.postInteractionTargetAndData();
            address listener = order.maker.get();
            if (data.length > 19) {
                listener = address(bytes20(data));
                data = data[20:];
            }
            IPostInteraction(listener).postInteraction(
                order, extension, orderHash, msg.sender, makingAmount, takingAmount, remainingMakingAmount, data
            );
        }
        emit OrderFilled(orderHash, remainingMakingAmount - makingAmount);
    }
    /**
      * @notice Processes the taker interaction arguments.
      * @param takerTraits The taker preferences for the order.
      * @param args The taker interaction arguments.
      * @return target The address to which the order is filled.
      * @return extension The extension calldata of the order.
      * @return interaction The interaction calldata.
      */
    function _parseArgs(TakerTraits takerTraits, bytes calldata args)
        private
        view
        returns(
            address target,
            bytes calldata extension,
            bytes calldata interaction
        )
    {
        if (takerTraits.argsHasTarget()) {
            target = address(bytes20(args));
            args = args[20:];
        } else {
            target = msg.sender;
        }
        uint256 extensionLength = takerTraits.argsExtensionLength();
        if (extensionLength > 0) {
            extension = args[:extensionLength];
            args = args[extensionLength:];
        } else {
            extension = msg.data[:0];
        }
        uint256 interactionLength = takerTraits.argsInteractionLength();
        if (interactionLength > 0) {
            interaction = args[:interactionLength];
        } else {
            interaction = msg.data[:0];
        }
    }
    /**
      * @notice Checks the remaining making amount for the order.
      * @dev If the order has been invalidated, the function will revert.
      * @param order The order to check.
      * @param orderHash The hash of the order.
      * @return remainingMakingAmount The remaining amount of the order.
      */
    function _checkRemainingMakingAmount(IOrderMixin.Order calldata order, bytes32 orderHash) private view returns(uint256 remainingMakingAmount) {
        if (order.makerTraits.useBitInvalidator()) {
            remainingMakingAmount = order.makingAmount;
        } else {
            remainingMakingAmount = _remainingInvalidator[order.maker.get()][orderHash].remaining(order.makingAmount);
        }
        if (remainingMakingAmount == 0) revert InvalidatedOrder();
    }
    /**
      * @notice Calls the transferFrom function with an arbitrary suffix.
      * @dev The suffix is appended to the end of the standard ERC20 transferFrom function parameters.
      * @param asset The token to be transferred.
      * @param from The address to transfer the token from.
      * @param to The address to transfer the token to.
      * @param amount The amount of the token to transfer.
      * @param suffix The suffix (additional data) to append to the end of the transferFrom call.
      * @return success A boolean indicating whether the transfer was successful.
      */
    function _callTransferFromWithSuffix(address asset, address from, address to, uint256 amount, bytes calldata suffix) private returns(bool success) {
        bytes4 selector = IERC20.transferFrom.selector;
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            if suffix.length {
                calldatacopy(add(data, 0x64), suffix.offset, suffix.length)
            }
            let status := call(gas(), asset, 0, data, add(0x64, suffix.length), 0x0, 0x20)
            success := and(status, or(iszero(returndatasize()), and(gt(returndatasize(), 31), eq(mload(0), 1))))
        }
    }
}
// File @1inch/solidity-utils/contracts/interfaces/[email protected]
interface IERC20MetadataUppercase {
    function NAME() external view returns (string memory); // solhint-disable-line func-name-mixedcase
    function SYMBOL() external view returns (string memory); // solhint-disable-line func-name-mixedcase
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/// @title Library with gas-efficient string operations
library StringUtil {
    function toHex(uint256 value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }
    function toHex(address value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }
    /// @dev this is the assembly adaptation of highly optimized toHex16 code from Mikhail Vladimirov
    /// https://stackoverflow.com/a/69266989
    function toHex(bytes memory data) internal pure returns (string memory result) {
        assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
            function _toHex16(input) -> output {
                output := or(
                    and(input, 0xFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000),
                    shr(64, and(input, 0x0000000000000000FFFFFFFFFFFFFFFF00000000000000000000000000000000))
                )
                output := or(
                    and(output, 0xFFFFFFFF000000000000000000000000FFFFFFFF000000000000000000000000),
                    shr(32, and(output, 0x00000000FFFFFFFF000000000000000000000000FFFFFFFF0000000000000000))
                )
                output := or(
                    and(output, 0xFFFF000000000000FFFF000000000000FFFF000000000000FFFF000000000000),
                    shr(16, and(output, 0x0000FFFF000000000000FFFF000000000000FFFF000000000000FFFF00000000))
                )
                output := or(
                    and(output, 0xFF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000),
                    shr(8, and(output, 0x00FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000))
                )
                output := or(
                    shr(4, and(output, 0xF000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000)),
                    shr(8, and(output, 0x0F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F00))
                )
                output := add(
                    add(0x3030303030303030303030303030303030303030303030303030303030303030, output),
                    mul(
                        and(
                            shr(4, add(output, 0x0606060606060606060606060606060606060606060606060606060606060606)),
                            0x0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F
                        ),
                        7 // Change 7 to 39 for lower case output
                    )
                )
            }
            result := mload(0x40)
            let length := mload(data)
            let resultLength := shl(1, length)
            let toPtr := add(result, 0x22) // 32 bytes for length + 2 bytes for '0x'
            mstore(0x40, add(toPtr, resultLength)) // move free memory pointer
            mstore(add(result, 2), 0x3078) // 0x3078 is right aligned so we write to `result + 2`
            // to store the last 2 bytes in the beginning of the string
            mstore(result, add(resultLength, 2)) // extra 2 bytes for '0x'
            for {
                let fromPtr := add(data, 0x20)
                let endPtr := add(fromPtr, length)
            } lt(fromPtr, endPtr) {
                fromPtr := add(fromPtr, 0x20)
            } {
                let rawData := mload(fromPtr)
                let hexData := _toHex16(rawData)
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
                hexData := _toHex16(shl(128, rawData))
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
            }
        }
    }
}
// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// File @1inch/solidity-utils/contracts/libraries/[email protected]
/// @title Library, which allows usage of ETH as ERC20 and ERC20 itself. Uses SafeERC20 library for ERC20 interface.
library UniERC20 {
    using SafeERC20 for IERC20;
    error InsufficientBalance();
    error ApproveCalledOnETH();
    error NotEnoughValue();
    error FromIsNotSender();
    error ToIsNotThis();
    error ETHTransferFailed();
    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(address(0));
    /// @dev Returns true if `token` is ETH.
    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }
    /// @dev Returns `account` ERC20 `token` balance.
    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }
    /// @dev `token` transfer `to` `amount`.
    /// Note that this function does nothing in case of zero amount.
    function uniTransfer(
        IERC20 token,
        address payable to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (address(this).balance < amount) revert InsufficientBalance();
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = to.call{value: amount, gas: _RAW_CALL_GAS_LIMIT}("");
                if (!success) revert ETHTransferFailed();
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }
    /// @dev `token` transfer `from` `to` `amount`.
    /// Note that this function does nothing in case of zero amount.
    function uniTransferFrom(
        IERC20 token,
        address payable from,
        address to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (msg.value < amount) revert NotEnoughValue();
                if (from != msg.sender) revert FromIsNotSender();
                if (to != address(this)) revert ToIsNotThis();
                if (msg.value > amount) {
                    // Return remainder if exist
                    unchecked {
                        // solhint-disable-next-line avoid-low-level-calls
                        (bool success, ) = from.call{value: msg.value - amount, gas: _RAW_CALL_GAS_LIMIT}("");
                        if (!success) revert ETHTransferFailed();
                    }
                }
            } else {
                token.safeTransferFrom(from, to, amount);
            }
        }
    }
    /// @dev Returns `token` symbol from ERC20 metadata.
    function uniSymbol(IERC20 token) internal view returns (string memory) {
        return _uniDecode(token, IERC20Metadata.symbol.selector, IERC20MetadataUppercase.SYMBOL.selector);
    }
    /// @dev Returns `token` name from ERC20 metadata.
    function uniName(IERC20 token) internal view returns (string memory) {
        return _uniDecode(token, IERC20Metadata.name.selector, IERC20MetadataUppercase.NAME.selector);
    }
    /// @dev Reverts if `token` is ETH, otherwise performs ERC20 forceApprove.
    function uniApprove(
        IERC20 token,
        address to,
        uint256 amount
    ) internal {
        if (isETH(token)) revert ApproveCalledOnETH();
        token.forceApprove(to, amount);
    }
    /// @dev 20K gas is provided to account for possible implementations of name/symbol
    /// (token implementation might be behind proxy or store the value in storage)
    function _uniDecode(
        IERC20 token,
        bytes4 lowerCaseSelector,
        bytes4 upperCaseSelector
    ) private view returns (string memory result) {
        if (isETH(token)) {
            return "ETH";
        }
        (bool success, bytes memory data) = address(token).staticcall{gas: 20000}(
            abi.encodeWithSelector(lowerCaseSelector)
        );
        if (!success) {
            (success, data) = address(token).staticcall{gas: 20000}(abi.encodeWithSelector(upperCaseSelector));
        }
        if (success && data.length >= 0x40) {
            (uint256 offset, uint256 len) = abi.decode(data, (uint256, uint256));
            /*
                return data is padded up to 32 bytes with ABI encoder also sometimes
                there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that overall data length is greater or equal than string length + extra 64 bytes
            */
            if (offset == 0x20 && data.length >= 0x40 + len) {
                assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                    result := add(data, 0x40)
                }
                return result;
            }
        }
        if (success && data.length == 32) {
            uint256 len = 0;
            while (len < data.length && data[len] >= 0x20 && data[len] <= 0x7E) {
                unchecked {
                    len++;
                }
            }
            if (len > 0) {
                assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                    mstore(data, len)
                }
                return string(data);
            }
        }
        return StringUtil.toHex(address(token));
    }
}
// File @openzeppelin/contracts/access/[email protected]
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);
    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// File contracts/helpers/RouterErrors.sol
library RouterErrors {
    error ReturnAmountIsNotEnough(uint256 result, uint256 minReturn);
    error InvalidMsgValue();
    error ERC20TransferFailed();
    error Permit2TransferFromFailed();
    error ApproveFailed();
}
// File contracts/interfaces/IClipperExchange.sol
/// @title Clipper interface subset used in swaps
interface IClipperExchange {
    struct Signature {
        uint8 v;
        bytes32 r;
        bytes32 s;
    }
    function sellEthForToken(address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external payable;
    function sellTokenForEth(address inputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
    function swap(address inputToken, address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
}
// File contracts/routers/ClipperRouter.sol
/**
 * @title ClipperRouter
 * @notice Clipper router that allows to use `IClipperExchange` for swaps.
 */
contract ClipperRouter is Pausable, EthReceiver {
    using SafeERC20 for IERC20;
    using SafeERC20 for IWETH;
    using AddressLib for Address;
    uint256 private constant _PERMIT2_FLAG = 1 << 255;
    uint256 private constant _SIGNATURE_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _SIGNATURE_V_SHIFT = 255;
    bytes5 private constant _INCH_TAG = "1INCH";
    uint256 private constant _INCH_TAG_LENGTH = 5;
    IERC20 private constant _ETH = IERC20(address(0));
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    constructor(IWETH weth) {
        _WETH = weth;
    }
    /**
    * @notice Same as `clipperSwapTo` but uses `msg.sender` as recipient.
    * @param clipperExchange Clipper pool address.
    * @param srcToken Source token and flags.
    * @param dstToken Destination token.
    * @param inputAmount Amount of source tokens to swap.
    * @param outputAmount Amount of destination tokens to receive.
    * @param goodUntil Clipper parameter.
    * @param r Clipper order signature (r part).
    * @param vs Clipper order signature (vs part).
    * @return returnAmount Amount of destination tokens received.
    */
    function clipperSwap(
        IClipperExchange clipperExchange,
        Address srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) external payable returns(uint256 returnAmount) {
        return clipperSwapTo(clipperExchange, payable(msg.sender), srcToken, dstToken, inputAmount, outputAmount, goodUntil, r, vs);
    }
    /**
    * @notice Performs swap using Clipper exchange. Wraps and unwraps ETH if required.
    *         Sending non-zero `msg.value` for anything but ETH swaps is prohibited.
    * @param clipperExchange Clipper pool address.
    * @param recipient Address that will receive swap funds.
    * @param srcToken Source token and flags.
    * @param dstToken Destination token.
    * @param inputAmount Amount of source tokens to swap.
    * @param outputAmount Amount of destination tokens to receive.
    * @param goodUntil Clipper parameter.
    * @param r Clipper order signature (r part).
    * @param vs Clipper order signature (vs part).
    * @return returnAmount Amount of destination tokens received.
    */
    function clipperSwapTo(
        IClipperExchange clipperExchange,
        address payable recipient,
        Address srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) public payable whenNotPaused() returns(uint256 returnAmount) {
        IERC20 srcToken_ = IERC20(srcToken.get());
        if (srcToken_ == _ETH) {
            if (msg.value != inputAmount) revert RouterErrors.InvalidMsgValue();
        } else {
            if (msg.value != 0) revert RouterErrors.InvalidMsgValue();
            srcToken_.safeTransferFromUniversal(msg.sender, address(clipperExchange), inputAmount, srcToken.getFlag(_PERMIT2_FLAG));
        }
        if (srcToken_ == _ETH) {
            // clipperExchange.sellEthForToken{value: inputAmount}(address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellEthForToken.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)
                mstore(ptr, selector)
                mstore(add(ptr, 0x04), dstToken)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                mstore(add(ptr, 0x84), recipient)
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x124), _INCH_TAG_LENGTH)
                mstore(add(ptr, 0x144), _INCH_TAG)
                if iszero(call(gas(), clipper, inputAmount, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else if (dstToken == _ETH) {
            // clipperExchange.sellTokenForEth(address(srcToken_), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellTokenForEth.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)
                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken_)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                switch iszero(dstToken)
                case 1 {
                    mstore(add(ptr, 0x84), recipient)
                }
                default {
                    mstore(add(ptr, 0x84), address())
                }
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x124), _INCH_TAG_LENGTH)
                mstore(add(ptr, 0x144), _INCH_TAG)
                if iszero(call(gas(), clipper, 0, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else {
            // clipperExchange.swap(address(srcToken_), address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.swap.selector;
            assembly ("memory-safe") { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)
                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken_)
                mstore(add(ptr, 0x24), dstToken)
                mstore(add(ptr, 0x44), inputAmount)
                mstore(add(ptr, 0x64), outputAmount)
                mstore(add(ptr, 0x84), goodUntil)
                mstore(add(ptr, 0xa4), recipient)
                mstore(add(ptr, 0xc4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xe4), r)
                mstore(add(ptr, 0x104), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x124), 0x140)
                mstore(add(ptr, 0x144), _INCH_TAG_LENGTH)
                mstore(add(ptr, 0x164), _INCH_TAG)
                if iszero(call(gas(), clipper, 0, ptr, 0x169, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }
        return outputAmount;
    }
}
// File contracts/interfaces/IAggregationExecutor.sol
/// @title Interface for making arbitrary calls during swap
interface IAggregationExecutor {
    /// @notice propagates information about original msg.sender and executes arbitrary data
    function execute(address msgSender) external payable returns(uint256);  // 0x4b64e492
}
// File contracts/routers/GenericRouter.sol
/**
 * @title GenericRouter
 * @notice Router that allows to use `IAggregationExecutor` for swaps.
 */
contract GenericRouter is Pausable, EthReceiver {
    using UniERC20 for IERC20;
    using SafeERC20 for IERC20;
    error ZeroMinReturn();
    uint256 private constant _PARTIAL_FILL = 1 << 0;
    uint256 private constant _REQUIRES_EXTRA_ETH = 1 << 1;
    uint256 private constant _USE_PERMIT2 = 1 << 2;
    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address payable srcReceiver;
        address payable dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 flags;
    }
    /**
    * @notice Performs a swap, delegating all calls encoded in `data` to `executor`. See tests for usage examples.
    * @dev Router keeps 1 wei of every token on the contract balance for gas optimisations reasons.
    *      This affects first swap of every token by leaving 1 wei on the contract.
    * @param executor Aggregation executor that executes calls described in `data`.
    * @param desc Swap description.
    * @param data Encoded calls that `caller` should execute in between of swaps.
    * @return returnAmount Resulting token amount.
    * @return spentAmount Source token amount.
    */
    function swap(
        IAggregationExecutor executor,
        SwapDescription calldata desc,
        bytes calldata data
    )
        external
        payable
        whenNotPaused()
        returns (
            uint256 returnAmount,
            uint256 spentAmount
        )
    {
        if (desc.minReturnAmount == 0) revert ZeroMinReturn();
        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;
        bool srcETH = srcToken.isETH();
        if (desc.flags & _REQUIRES_EXTRA_ETH != 0) {
            if (msg.value <= (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        } else {
            if (msg.value != (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        }
        if (!srcETH) {
            srcToken.safeTransferFromUniversal(msg.sender, desc.srcReceiver, desc.amount, desc.flags & _USE_PERMIT2 != 0);
        }
        returnAmount = _execute(executor, msg.sender, desc.amount, data);
        spentAmount = desc.amount;
        if (desc.flags & _PARTIAL_FILL != 0) {
            uint256 unspentAmount = srcToken.uniBalanceOf(address(this));
            if (unspentAmount > 1) {
                // we leave 1 wei on the router for gas optimisations reasons
                unchecked { unspentAmount--; }
                spentAmount -= unspentAmount;
                srcToken.uniTransfer(payable(msg.sender), unspentAmount);
            }
            if (returnAmount * desc.amount < desc.minReturnAmount * spentAmount) revert RouterErrors.ReturnAmountIsNotEnough(returnAmount, desc.minReturnAmount * spentAmount / desc.amount);
        } else {
            if (returnAmount < desc.minReturnAmount) revert RouterErrors.ReturnAmountIsNotEnough(returnAmount, desc.minReturnAmount);
        }
        address payable dstReceiver = (desc.dstReceiver == address(0)) ? payable(msg.sender) : desc.dstReceiver;
        dstToken.uniTransfer(dstReceiver, returnAmount);
    }
    function _execute(
        IAggregationExecutor executor,
        address srcTokenOwner,
        uint256 inputAmount,
        bytes calldata data
    ) private returns(uint256 result) {
        bytes4 executeSelector = executor.execute.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, executeSelector)
            mstore(add(ptr, 0x04), srcTokenOwner)
            calldatacopy(add(ptr, 0x24), data.offset, data.length)
            mstore(add(add(ptr, 0x24), data.length), inputAmount)
            if iszero(call(gas(), executor, callvalue(), ptr, add(0x44, data.length), 0, 0x20)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            result := mload(0)
        }
    }
}
// File contracts/interfaces/IUniswapV3Pool.sol
interface IUniswapV3Pool {
    /// @notice Emitted by the pool for any swaps between token0 and token1
    /// @param sender The address that initiated the swap call, and that received the callback
    /// @param recipient The address that received the output of the swap
    /// @param amount0 The delta of the token0 balance of the pool
    /// @param amount1 The delta of the token1 balance of the pool
    /// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
    /// @param liquidity The liquidity of the pool after the swap
    /// @param tick The log base 1.0001 of price of the pool after the swap
    event Swap(
        address indexed sender,
        address indexed recipient,
        int256 amount0,
        int256 amount1,
        uint160 sqrtPriceX96,
        uint128 liquidity,
        int24 tick
    );
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);
    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);
    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);
    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}
// File contracts/interfaces/IUniswapV3SwapCallback.sol
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}
// File contracts/libs/ProtocolLib.sol
library ProtocolLib {
    using AddressLib for Address;
    enum Protocol {
        UniswapV2,
        UniswapV3,
        Curve
    }
    uint256 private constant _PROTOCOL_OFFSET = 253;
    uint256 private constant _WETH_UNWRAP_FLAG = 1 << 252;
    uint256 private constant _WETH_NOT_WRAP_FLAG = 1 << 251;
    uint256 private constant _USE_PERMIT2_FLAG = 1 << 250;
    function protocol(Address self) internal pure returns(Protocol) {
        // there is no need to mask because protocol is stored in the highest 3 bits
        return Protocol((Address.unwrap(self) >> _PROTOCOL_OFFSET));
    }
    function shouldUnwrapWeth(Address self) internal pure returns(bool) {
        return self.getFlag(_WETH_UNWRAP_FLAG);
    }
    function shouldWrapWeth(Address self) internal pure returns(bool) {
        return !self.getFlag(_WETH_NOT_WRAP_FLAG);
    }
    function usePermit2(Address self) internal pure returns(bool) {
        return self.getFlag(_USE_PERMIT2_FLAG);
    }
    function addressForPreTransfer(Address self) internal view returns(address) {
        if (protocol(self) == Protocol.UniswapV2) {
            return self.get();
        }
        return address(this);
    }
}
// File contracts/routers/UnoswapRouter.sol
/**
 * @title UnoswapRouter
 * @notice A router contract for executing token swaps on Unoswap-compatible decentralized exchanges: UniswapV3, UniswapV2, Curve.
 */
contract UnoswapRouter is Pausable, EthReceiver, IUniswapV3SwapCallback {
    using SafeERC20 for IERC20;
    using SafeERC20 for IWETH;
    using AddressLib for Address;
    using ProtocolLib for Address;
    error BadPool();
    error BadCurveSwapSelector();
    /// @dev WETH address is network-specific and needs to be changed before deployment.
    /// It can not be moved to immutable as immutables are not supported in assembly
    address private constant _WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    address private constant _ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    address private constant _PERMIT2 = 0x000000000022D473030F116dDEE9F6B43aC78BA3;
    bytes4 private constant _WETH_DEPOSIT_CALL_SELECTOR = 0xd0e30db0;
    bytes4 private constant _WETH_WITHDRAW_CALL_SELECTOR = 0x2e1a7d4d;
    uint256 private constant _ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _SELECTORS = (
        (uint256(uint32(IUniswapV3Pool.token0.selector)) << 224) |
        (uint256(uint32(IUniswapV3Pool.token1.selector)) << 192) |
        (uint256(uint32(IUniswapV3Pool.fee.selector)) << 160) |
        (uint256(uint32(IERC20.transfer.selector)) << 128) |
        (uint256(uint32(IERC20.transferFrom.selector)) << 96) |
        (uint256(uint32(IPermit2.transferFrom.selector)) << 64)
    );
    uint256 private constant _TOKEN0_SELECTOR_OFFSET = 0;
    uint256 private constant _TOKEN1_SELECTOR_OFFSET = 4;
    uint256 private constant _FEE_SELECTOR_OFFSET = 8;
    uint256 private constant _TRANSFER_SELECTOR_OFFSET = 12;
    uint256 private constant _TRANSFER_FROM_SELECTOR_OFFSET = 16;
    uint256 private constant _PERMIT2_TRANSFER_FROM_SELECTOR_OFFSET = 20;
    bytes32 private constant _POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
    bytes32 private constant _FF_FACTORY = 0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000;
    // =====================================================================
    //                          Methods with 1 pool
    // =====================================================================
    /**
    * @notice Swaps `amount` of the specified `token` for another token using an Unoswap-compatible exchange's pool,
    *         with a minimum return specified by `minReturn`.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function unoswap(Address token, uint256 amount, uint256 minReturn, Address dex) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo(msg.sender, msg.sender, token, amount, minReturn, dex);
    }
    /**
    * @notice Swaps `amount` of the specified `token` for another token using an Unoswap-compatible exchange's pool,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    * @param to The address to receive the swapped tokens.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function unoswapTo(Address to, Address token, uint256 amount, uint256 minReturn, Address dex) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo(msg.sender, to.get(), token, amount, minReturn, dex);
    }
    /**
    * @notice Swaps ETH for another token using an Unoswap-compatible exchange's pool, with a minimum return specified by `minReturn`.
    *         The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function ethUnoswap(uint256 minReturn, Address dex) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo(address(this), msg.sender, Address.wrap(uint160(_WETH)), msg.value, minReturn, dex);
    }
    /**
    * @notice Swaps ETH for another token using an Unoswap-compatible exchange's pool, sending the resulting tokens to the `to` address,
    *         with a minimum return specified by `minReturn`. The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param to The address to receive the swapped tokens.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap.
    */
    function ethUnoswapTo(Address to, uint256 minReturn, Address dex) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo(address(this), to.get(), Address.wrap(uint160(_WETH)), msg.value, minReturn, dex);
    }
    function _unoswapTo(address from, address to, Address token, uint256 amount, uint256 minReturn, Address dex) private whenNotPaused() returns(uint256 returnAmount) {
        if (dex.shouldUnwrapWeth()) {
            returnAmount = _unoswap(from, address(this), token, amount, minReturn, dex);
            IWETH(_WETH).safeWithdrawTo(returnAmount, to);
        } else {
            returnAmount = _unoswap(from, to, token, amount, minReturn, dex);
        }
    }
    // =====================================================================
    //                    Methods with 2 sequential pools
    // =====================================================================
    /**
    * @notice Swaps `amount` of the specified `token` for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         with a minimum return specified by `minReturn`.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function unoswap2(Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo2(msg.sender, msg.sender, token, amount, minReturn, dex, dex2);
    }
    /**
    * @notice Swaps `amount` of the specified `token` for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    * @param to The address to receive the swapped tokens.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function unoswapTo2(Address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo2(msg.sender, to.get(), token, amount, minReturn, dex, dex2);
    }
    /**
    * @notice Swaps ETH for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         with a minimum return specified by `minReturn`. The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function ethUnoswap2(uint256 minReturn, Address dex, Address dex2) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo2(address(this), msg.sender, Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2);
    }
    /**
    * @notice Swaps ETH for another token using two Unoswap-compatible exchange pools (`dex` and `dex2`) sequentially,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    *         The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param to The address to receive the swapped tokens.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through both pools.
    */
    function ethUnoswapTo2(Address to, uint256 minReturn, Address dex, Address dex2) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo2(address(this), to.get(), Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2);
    }
    function _unoswapTo2(address from, address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2) private whenNotPaused() returns(uint256 returnAmount) {
        address pool2 = dex2.addressForPreTransfer();
        address target = dex2.shouldUnwrapWeth() ? address(this) : to;
        returnAmount = _unoswap(from, pool2, token, amount, 0, dex);
        returnAmount = _unoswap(pool2, target, Address.wrap(0), returnAmount, minReturn, dex2);
        if (dex2.shouldUnwrapWeth()) {
            IWETH(_WETH).safeWithdrawTo(returnAmount, to);
        }
    }
    // =====================================================================
    //                    Methods with 3 sequential pools
    // =====================================================================
    /**
    * @notice Swaps `amount` of the specified `token` for another token using three Unoswap-compatible exchange pools
    *         (`dex`, `dex2`, and `dex3`) sequentially, with a minimum return specified by `minReturn`.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function unoswap3(Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2, Address dex3) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo3(msg.sender, msg.sender, token, amount, minReturn, dex, dex2, dex3);
    }
    /**
    * @notice Swaps `amount` of the specified `token` for another token using three Unoswap-compatible exchange pools
    *         (`dex`, `dex2`, and `dex3`) sequentially, sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    * @param to The address to receive the swapped tokens.
    * @param token The address of the token to be swapped.
    * @param amount The amount of tokens to be swapped.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function unoswapTo3(Address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2, Address dex3) external returns(uint256 returnAmount) {
        returnAmount = _unoswapTo3(msg.sender, to.get(), token, amount, minReturn, dex, dex2, dex3);
    }
    /**
    * @notice Swaps ETH for another token using three Unoswap-compatible exchange pools (`dex`, `dex2`, and `dex3`) sequentially,
    *         with a minimum return specified by `minReturn`. The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function ethUnoswap3(uint256 minReturn, Address dex, Address dex2, Address dex3) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo3(address(this), msg.sender, Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2, dex3);
    }
    /**
    * @notice Swaps ETH for another token using three Unoswap-compatible exchange pools (`dex`, `dex2`, and `dex3`) sequentially,
    *         sending the resulting tokens to the `to` address, with a minimum return specified by `minReturn`.
    *         The function is payable and requires the sender to attach ETH.
    *         It is necessary to check if it's cheaper to use _WETH_NOT_WRAP_FLAG in `dex` Address (for example: for Curve pools).
    * @param to The address to receive the swapped tokens.
    * @param minReturn The minimum amount of tokens to be received after the swap.
    * @param dex The address of the first Unoswap-compatible exchange's pool.
    * @param dex2 The address of the second Unoswap-compatible exchange's pool.
    * @param dex3 The address of the third Unoswap-compatible exchange's pool.
    * @return returnAmount The actual amount of tokens received after the swap through all three pools.
    */
    function ethUnoswapTo3(Address to, uint256 minReturn, Address dex, Address dex2, Address dex3) external payable returns(uint256 returnAmount) {
        if (dex.shouldWrapWeth()) {
            IWETH(_WETH).safeDeposit(msg.value);
        }
        returnAmount = _unoswapTo3(address(this), to.get(), Address.wrap(uint160(_WETH)), msg.value, minReturn, dex, dex2, dex3);
    }
    function _unoswapTo3(address from, address to, Address token, uint256 amount, uint256 minReturn, Address dex, Address dex2, Address dex3) private whenNotPaused() returns(uint256 returnAmount) {
        address pool2 = dex2.addressForPreTransfer();
        address pool3 = dex3.addressForPreTransfer();
        address target = dex3.shouldUnwrapWeth() ? address(this) : to;
        returnAmount = _unoswap(from, pool2, token, amount, 0, dex);
        returnAmount = _unoswap(pool2, pool3, Address.wrap(0), returnAmount, 0, dex2);
        returnAmount = _unoswap(pool3, target, Address.wrap(0), returnAmount, minReturn, dex3);
        if (dex3.shouldUnwrapWeth()) {
            IWETH(_WETH).safeWithdrawTo(returnAmount, to);
        }
    }
    function _unoswap(
        address spender,
        address recipient,
        Address token,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 returnAmount) {
        ProtocolLib.Protocol protocol = dex.protocol();
        if (protocol == ProtocolLib.Protocol.UniswapV3) {
            returnAmount = _unoswapV3(spender, recipient, amount, minReturn, dex);
        } else if (protocol == ProtocolLib.Protocol.UniswapV2) {
            if (spender == address(this)) {
                IERC20(token.get()).safeTransfer(dex.get(), amount);
            } else if (spender == msg.sender) {
                IERC20(token.get()).safeTransferFromUniversal(msg.sender, dex.get(), amount, dex.usePermit2());
            }
            returnAmount = _unoswapV2(recipient, amount, minReturn, dex);
        } else if (protocol == ProtocolLib.Protocol.Curve) {
            if (spender == msg.sender && msg.value == 0) {
                IERC20(token.get()).safeTransferFromUniversal(msg.sender, address(this), amount, dex.usePermit2());
            }
            returnAmount = _curfe(recipient, amount, minReturn, dex);
        }
    }
    uint256 private constant _UNISWAP_V2_ZERO_FOR_ONE_OFFSET = 247;
    uint256 private constant _UNISWAP_V2_ZERO_FOR_ONE_MASK = 0x01;
    uint256 private constant _UNISWAP_V2_NUMERATOR_OFFSET = 160;
    uint256 private constant _UNISWAP_V2_NUMERATOR_MASK = 0xffffffff;
    bytes4 private constant _UNISWAP_V2_PAIR_RESERVES_CALL_SELECTOR = 0x0902f1ac;
    bytes4 private constant _UNISWAP_V2_PAIR_SWAP_CALL_SELECTOR = 0x022c0d9f;
    uint256 private constant _UNISWAP_V2_DENOMINATOR = 1e9;
    uint256 private constant _UNISWAP_V2_DEFAULT_NUMERATOR = 997_000_000;
    error ReservesCallFailed();
    function _unoswapV2(
        address recipient,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 ret) {
        bytes4 returnAmountNotEnoughException = RouterErrors.ReturnAmountIsNotEnough.selector;
        bytes4 reservesCallFailedException = ReservesCallFailed.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let pool := and(dex, _ADDRESS_MASK)
            let zeroForOne := and(shr(_UNISWAP_V2_ZERO_FOR_ONE_OFFSET, dex), _UNISWAP_V2_ZERO_FOR_ONE_MASK)
            let numerator := and(shr(_UNISWAP_V2_NUMERATOR_OFFSET, dex), _UNISWAP_V2_NUMERATOR_MASK)
            if iszero(numerator) {
                numerator := _UNISWAP_V2_DEFAULT_NUMERATOR
            }
            let ptr := mload(0x40)
            mstore(0, _UNISWAP_V2_PAIR_RESERVES_CALL_SELECTOR)
            if iszero(staticcall(gas(), pool, 0, 4, 0, 0x40)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            if sub(returndatasize(), 0x60) {
                mstore(0, reservesCallFailedException)
                revert(0, 4)
            }
            let reserve0 := mload(mul(0x20, iszero(zeroForOne)))
            let reserve1 := mload(mul(0x20, zeroForOne))
            // this will not overflow as reserve0, reserve1 and ret fit to 112 bit and numerator and _DENOMINATOR fit to 32 bit
            ret := mul(amount, numerator)
            ret := div(mul(ret, reserve1), add(ret, mul(reserve0, _UNISWAP_V2_DENOMINATOR)))
            if lt(ret, minReturn) {
                mstore(ptr, returnAmountNotEnoughException)
                mstore(add(ptr, 0x04), ret)
                mstore(add(ptr, 0x24), minReturn)
                revert(ptr, 0x44)
            }
            mstore(ptr, _UNISWAP_V2_PAIR_SWAP_CALL_SELECTOR)
            mstore(add(ptr, 0x04), mul(ret, iszero(zeroForOne)))
            mstore(add(ptr, 0x24), mul(ret, zeroForOne))
            mstore(add(ptr, 0x44), recipient)
            mstore(add(ptr, 0x64), 0x80)
            mstore(add(ptr, 0x84), 0)
            if iszero(call(gas(), pool, 0, ptr, 0xa4, 0, 0)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 private constant _UNISWAP_V3_MIN_SQRT_RATIO = 4295128739 + 1;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 private constant _UNISWAP_V3_MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342 - 1;
    uint256 private constant _UNISWAP_V3_ZERO_FOR_ONE_OFFSET = 247;
    uint256 private constant _UNISWAP_V3_ZERO_FOR_ONE_MASK = 0x01;
    function _unoswapV3(
        address spender,
        address recipient,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 ret) {
        bytes4 swapSelector = IUniswapV3Pool.swap.selector;
        bool usePermit2 = dex.usePermit2();
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            let pool := and(dex, _ADDRESS_MASK)
            let zeroForOne := and(shr(_UNISWAP_V3_ZERO_FOR_ONE_OFFSET, dex), _UNISWAP_V3_ZERO_FOR_ONE_MASK)
            let ptr := mload(0x40)
            mstore(ptr, swapSelector)
            mstore(add(ptr, 0x04), recipient)
            mstore(add(ptr, 0x24), zeroForOne)
            mstore(add(ptr, 0x44), amount)
            switch zeroForOne
            case 1 {
                mstore(add(ptr, 0x64), _UNISWAP_V3_MIN_SQRT_RATIO)
            }
            case 0 {
                mstore(add(ptr, 0x64), _UNISWAP_V3_MAX_SQRT_RATIO)
            }
            mstore(add(ptr, 0x84), 0xa0)
            mstore(add(ptr, 0xa4), 0x40)
            mstore(add(ptr, 0xc4), spender)
            mstore(add(ptr, 0xe4), usePermit2)
            if iszero(call(gas(), pool, 0, ptr, 0x0104, 0, 0x40)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            ret := sub(0, mload(mul(0x20, zeroForOne)))
        }
        if (ret < minReturn) revert RouterErrors.ReturnAmountIsNotEnough(ret, minReturn);
    }
    uint256 private constant _CURVE_SWAP_SELECTOR_IDX_OFFSET = 184;
    uint256 private constant _CURVE_SWAP_SELECTOR_IDX_MASK = 0xff;
    uint256 private constant _CURVE_FROM_COINS_SELECTOR_OFFSET = 192;
    uint256 private constant _CURVE_FROM_COINS_SELECTOR_MASK = 0xff;
    uint256 private constant _CURVE_FROM_COINS_ARG_OFFSET = 200;
    uint256 private constant _CURVE_FROM_COINS_ARG_MASK = 0xff;
    uint256 private constant _CURVE_TO_COINS_SELECTOR_OFFSET = 208;
    uint256 private constant _CURVE_TO_COINS_SELECTOR_MASK = 0xff;
    uint256 private constant _CURVE_TO_COINS_ARG_OFFSET = 216;
    uint256 private constant _CURVE_TO_COINS_ARG_MASK = 0xff;
    uint256 private constant _CURVE_FROM_TOKEN_OFFSET = 224;
    uint256 private constant _CURVE_FROM_TOKEN_MASK = 0xff;
    uint256 private constant _CURVE_TO_TOKEN_OFFSET = 232;
    uint256 private constant _CURVE_TO_TOKEN_MASK = 0xff;
    uint256 private constant _CURVE_INPUT_WETH_DEPOSIT_OFFSET = 240;
    uint256 private constant _CURVE_INPUT_WETH_WITHDRAW_OFFSET = 241;
    uint256 private constant _CURVE_SWAP_USE_ETH_OFFSET = 242;
    uint256 private constant _CURVE_SWAP_HAS_ARG_USE_ETH_OFFSET = 243;
    uint256 private constant _CURVE_SWAP_HAS_ARG_DESTINATION_OFFSET = 244;
    uint256 private constant _CURVE_OUTPUT_WETH_DEPOSIT_OFFSET = 245;
    uint256 private constant _CURVE_OUTPUT_WETH_WITHDRAW_OFFSET = 246;
    uint256 private constant _CURVE_SWAP_USE_SECOND_OUTPUT_OFFSET = 247;
    uint256 private constant _CURVE_SWAP_HAS_ARG_CALLBACK_OFFSET = 249;
    // Curve Pool function selectors for different `coins` methods. For details, see contracts/interfaces/ICurvePool.sol
    bytes32 private constant _CURVE_COINS_SELECTORS = 0x87cb4f5723746eb8c6610657b739953eb9947eb0000000000000000000000000;
    // Curve Pool function selectors for different `exchange` methods. For details, see contracts/interfaces/ICurvePool.sol
    bytes32 private constant _CURVE_SWAP_SELECTORS_1 = 0x3df02124a6417ed6ddc1f59d44ee1986ed4ae2b8bf5ed0562f7865a837cab679;
    bytes32 private constant _CURVE_SWAP_SELECTORS_2 = 0x2a064e3c5b41b90865b2489ba64833a0e2ad025a394747c5cb7558f1ce7d6503;
    bytes32 private constant _CURVE_SWAP_SELECTORS_3 = 0xd2e2833add96994f000000000000000000000000000000000000000000000000;
    uint256 private constant _CURVE_MAX_SELECTOR_INDEX = 17;
    function _curfe(
        address recipient,
        uint256 amount,
        uint256 minReturn,
        Address dex
    ) private returns(uint256 ret) {
        bytes4 callbackSelector = this.curveSwapCallback.selector;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            function callReturnSize(status) -> rds {
                if iszero(status) {
                    reRevert()
                }
                rds := returndatasize()
            }
            function tokenBalanceOf(tokenAddress, accountAddress) -> tokenBalance {
                mstore(0, 0x70a0823100000000000000000000000000000000000000000000000000000000)
                mstore(4, accountAddress)
                if iszero(callReturnSize(staticcall(gas(), tokenAddress, 0, 0x24, 0, 0x20))) {
                    revert(0, 0)
                }
                tokenBalance := mload(0)
            }
            function asmApprove(token, to, value, mem) {
                let selector := 0x095ea7b300000000000000000000000000000000000000000000000000000000 // IERC20.approve.selector
                let exception := 0x3e3f8f7300000000000000000000000000000000000000000000000000000000 // error ApproveFailed()
                if iszero(_asmCall(token, selector, to, value, mem)) {
                    if iszero(_asmCall(token, selector, to, 0, mem)) {
                        mstore(mem, exception)
                        revert(mem, 4)
                    }
                    if iszero(_asmCall(token, selector, to, value, mem)) {
                        mstore(mem, exception)
                        revert(mem, 4)
                    }
                }
            }
            function _asmCall(token, selector, to, value, mem) -> done {
                mstore(mem, selector)
                mstore(add(mem, 0x04), to)
                mstore(add(mem, 0x24), value)
                let success := call(gas(), token, 0, mem, 0x44, 0x0, 0x20)
                done := and(
                    success,
                    or(
                        iszero(returndatasize()),
                        and(gt(returndatasize(), 31), eq(mload(0), 1))
                    )
                )
            }
            function curveCoins(pool, selectorOffset, index) -> coin {
                mstore(0, _CURVE_COINS_SELECTORS)
                mstore(add(selectorOffset, 4), index)
                if iszero(staticcall(gas(), pool, selectorOffset, 0x24, 0, 0x20)) {
                    reRevert()
                }
                coin := mload(0)
            }
            let pool := and(dex, _ADDRESS_MASK)
            let useEth := and(shr(_CURVE_SWAP_USE_ETH_OFFSET, dex), 0x01)
            let hasCallback := and(shr(_CURVE_SWAP_HAS_ARG_CALLBACK_OFFSET, dex), 0x01)
            if and(shr(_CURVE_INPUT_WETH_DEPOSIT_OFFSET, dex), 0x01) {
                // Deposit ETH to WETH
                mstore(0, _WETH_DEPOSIT_CALL_SELECTOR)
                if iszero(call(gas(), _WETH, amount, 0, 4, 0, 0)) {
                    reRevert()
                }
            }
            if and(shr(_CURVE_INPUT_WETH_WITHDRAW_OFFSET, dex), 0x01) {
                // Withdraw ETH from WETH
                mstore(0, _WETH_WITHDRAW_CALL_SELECTOR)
                mstore(4, amount)
                if iszero(call(gas(), _WETH, 0, 0, 0x24, 0, 0)) {
                    reRevert()
                }
            }
            let toToken
            {  // Stack too deep
                let toSelectorOffset := and(shr(_CURVE_TO_COINS_SELECTOR_OFFSET, dex), _CURVE_TO_COINS_SELECTOR_MASK)
                let toTokenIndex := and(shr(_CURVE_TO_COINS_ARG_OFFSET, dex), _CURVE_TO_COINS_ARG_MASK)
                toToken := curveCoins(pool, toSelectorOffset, toTokenIndex)
            }
            let toTokenIsEth := or(eq(toToken, _ETH), eq(toToken, _WETH))
            // use approve when the callback is not used AND (raw ether is not used at all OR ether is used on the output)
            if and(iszero(hasCallback), or(iszero(useEth), toTokenIsEth)) {
                let fromSelectorOffset := and(shr(_CURVE_FROM_COINS_SELECTOR_OFFSET, dex), _CURVE_FROM_COINS_SELECTOR_MASK)
                let fromTokenIndex := and(shr(_CURVE_FROM_COINS_ARG_OFFSET, dex), _CURVE_FROM_COINS_ARG_MASK)
                let fromToken := curveCoins(pool, fromSelectorOffset, fromTokenIndex)
                if eq(fromToken, _ETH) {
                    fromToken := _WETH
                }
                asmApprove(fromToken, pool, amount, mload(0x40))
            }
            // Swap
            let ptr := mload(0x40)
            {  // stack too deep
                let selectorIndex := and(shr(_CURVE_SWAP_SELECTOR_IDX_OFFSET, dex), _CURVE_SWAP_SELECTOR_IDX_MASK)
                if gt(selectorIndex, _CURVE_MAX_SELECTOR_INDEX) {
                    mstore(0, 0xa231cb8200000000000000000000000000000000000000000000000000000000)  // BadCurveSwapSelector()
                    revert(0, 4)
                }
                mstore(ptr, _CURVE_SWAP_SELECTORS_1)
                mstore(add(ptr, 0x20), _CURVE_SWAP_SELECTORS_2)
                mstore(add(ptr, 0x40), _CURVE_SWAP_SELECTORS_3)
                ptr := add(ptr, mul(selectorIndex, 4))
            }
            mstore(add(ptr, 0x04), and(shr(_CURVE_FROM_TOKEN_OFFSET, dex), _CURVE_FROM_TOKEN_MASK))
            mstore(add(ptr, 0x24), and(shr(_CURVE_TO_TOKEN_OFFSET, dex), _CURVE_TO_TOKEN_MASK))
            mstore(add(ptr, 0x44), amount)
            mstore(add(ptr, 0x64), minReturn)
            let offset := 0x84
            if and(shr(_CURVE_SWAP_HAS_ARG_USE_ETH_OFFSET, dex), 0x01) {
                mstore(add(ptr, offset), useEth)
                offset := add(offset, 0x20)
            }
            switch hasCallback
            case 1 {
                mstore(add(ptr, offset), address())
                mstore(add(ptr, add(offset, 0x20)), recipient)
                mstore(add(ptr, add(offset, 0x40)), callbackSelector)
                offset := add(offset, 0x60)
            }
            default {
                if and(shr(_CURVE_SWAP_HAS_ARG_DESTINATION_OFFSET, dex), 0x01) {
                    mstore(add(ptr, offset), recipient)
                    offset := add(offset, 0x20)
                }
            }
            // swap call
            // value is passed when useEth is set but toToken is not ETH
            switch callReturnSize(call(gas(), pool, mul(mul(amount, useEth), iszero(toTokenIsEth)), ptr, offset, 0, 0x40))
            case 0 {
                // we expect that curve pools that do not return any value also do not have the recipient argument
                switch and(useEth, toTokenIsEth)
                case 1 {
                    ret := balance(address())
                }
                default {
                    ret := tokenBalanceOf(toToken, address())
                }
                ret := sub(ret, 1)  // keep 1 wei
            }
            default {
                ret := mload(mul(0x20, and(shr(_CURVE_SWAP_USE_SECOND_OUTPUT_OFFSET, dex), 0x01)))
            }
            if iszero(and(shr(_CURVE_SWAP_HAS_ARG_DESTINATION_OFFSET, dex), 0x01)) {
                if and(shr(_CURVE_OUTPUT_WETH_DEPOSIT_OFFSET, dex), 0x01) {
                    // Deposit ETH to WETH
                    mstore(0, _WETH_DEPOSIT_CALL_SELECTOR)
                    if iszero(call(gas(), _WETH, ret, 0, 4, 0, 0)) {
                        reRevert()
                    }
                }
                if and(shr(_CURVE_OUTPUT_WETH_WITHDRAW_OFFSET, dex), 0x01) {
                    // Withdraw ETH from WETH
                    mstore(0, _WETH_WITHDRAW_CALL_SELECTOR)
                    mstore(4, ret)
                    if iszero(call(gas(), _WETH, 0, 0, 0x24, 0, 0)) {
                        reRevert()
                    }
                }
                // Post transfer toToken if needed
                if xor(recipient, address()) {
                    switch and(useEth, toTokenIsEth)
                    case 1 {
                        if iszero(call(gas(), recipient, ret, 0, 0, 0, 0)) {
                            reRevert()
                        }
                    }
                    default {
                        if eq(toToken, _ETH) {
                            toToken := _WETH
                        }
                        // toToken.transfer(recipient, ret)
                        if iszero(_asmCall(toToken, 0xa9059cbb00000000000000000000000000000000000000000000000000000000, recipient, ret, ptr)) {
                            mstore(ptr, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // error ERC20TransferFailed()
                            revert(ptr, 4)
                        }
                    }
                }
            }
        }
        if (ret < minReturn) revert RouterErrors.ReturnAmountIsNotEnough(ret, minReturn);
    }
    /**
     * @notice Called by Curve pool during the swap operation initiated by `_curfe`.
     * @dev This function can be called by anyone assuming there are no tokens
     * stored on this contract between transactions.
     * @param inCoin Address of the token to be exchanged.
     * @param dx Amount of tokens to be exchanged.
     */
    function curveSwapCallback(
        address /* sender */,
        address /* receiver */,
        address inCoin,
        uint256 dx,
        uint256 /* dy */
    ) external {
        IERC20(inCoin).safeTransfer(msg.sender, dx);
    }
    /**
     * @notice See {IUniswapV3SwapCallback-uniswapV3SwapCallback}
     *         Called by UniswapV3 pool during the swap operation initiated by `_unoswapV3`.
     *         This callback function ensures the proper transfer of tokens based on the swap's
     *         configuration. It handles the transfer of tokens by either directly transferring
     *         the tokens from the payer to the recipient, or by using a secondary permit contract
     *         to transfer the tokens if required by the pool. It verifies the correct pool is
     *         calling the function and uses inline assembly for efficient execution and to access
     *         low-level EVM features.
     */
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata /* data */
    ) external override {
        uint256 selectors = _SELECTORS;
        assembly ("memory-safe") {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                let ptr := mload(0x40)
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
            function safeERC20(target, value, mem, memLength, outLen) {
                let status := call(gas(), target, value, mem, memLength, 0, outLen)
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()),                       // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1))  // true in return data
                )
                if iszero(success) {
                    mstore(0, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // ERC20TransferFailed()
                    revert(0, 4)
                }
            }
            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 0x15)  // 0x15 = _FF_FACTORY size
            mstore(emptyPtr, selectors)
            let amount
            let token
            switch sgt(amount0Delta, 0)
            case 1 {
                if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN0_SELECTOR_OFFSET), 0x4, resultPtr, 0x20)) {
                    reRevert()
                }
                token := mload(resultPtr)
                amount := amount0Delta
            }
            default {
                if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN1_SELECTOR_OFFSET), 0x4, add(resultPtr, 0x20), 0x20)) {
                    reRevert()
                }
                token := mload(add(resultPtr, 0x20))
                amount := amount1Delta
            }
            let payer := calldataload(0x84)
            let usePermit2 := calldataload(0xa4)
            switch eq(payer, address())
            case 1 {
                // IERC20(token.get()).safeTransfer(msg.sender,amount)
                mstore(add(emptyPtr, add(_TRANSFER_SELECTOR_OFFSET, 0x04)), caller())
                mstore(add(emptyPtr, add(_TRANSFER_SELECTOR_OFFSET, 0x24)), amount)
                safeERC20(token, 0, add(emptyPtr, _TRANSFER_SELECTOR_OFFSET), 0x44, 0x20)
            }
            default {
                switch sgt(amount0Delta, 0)
                case 1 {
                    if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN1_SELECTOR_OFFSET), 0x4, add(resultPtr, 0x20), 0x20)) {
                        reRevert()
                    }
                }
                default {
                    if iszero(staticcall(gas(), caller(), add(emptyPtr, _TOKEN0_SELECTOR_OFFSET), 0x4, resultPtr, 0x20)) {
                        reRevert()
                    }
                }
                if iszero(staticcall(gas(), caller(), add(emptyPtr, _FEE_SELECTOR_OFFSET), 0x4, add(resultPtr, 0x40), 0x20)) {
                    reRevert()
                }
                mstore(emptyPtr, _FF_FACTORY)
                mstore(resultPtr, keccak256(resultPtr, 0x60)) // Compute the inner hash in-place
                mstore(add(resultPtr, 0x20), _POOL_INIT_CODE_HASH)
                let pool := and(keccak256(emptyPtr, 0x55), _ADDRESS_MASK)
                if xor(pool, caller()) {
                    mstore(0, 0xb2c0272200000000000000000000000000000000000000000000000000000000)  // BadPool()
                    revert(0, 4)
                }
                switch usePermit2
                case 1 {
                    // permit2.transferFrom(payer, msg.sender, amount, token);
                    mstore(emptyPtr, selectors)
                    emptyPtr := add(emptyPtr, _PERMIT2_TRANSFER_FROM_SELECTOR_OFFSET)
                    mstore(add(emptyPtr, 0x04), payer)
                    mstore(add(emptyPtr, 0x24), caller())
                    mstore(add(emptyPtr, 0x44), amount)
                    mstore(add(emptyPtr, 0x64), token)
                    let success := call(gas(), _PERMIT2, 0, emptyPtr, 0x84, 0, 0)
                    if success {
                        success := gt(extcodesize(_PERMIT2), 0)
                    }
                    if iszero(success) {
                        mstore(0, 0xc3f9d33200000000000000000000000000000000000000000000000000000000)  // Permit2TransferFromFailed()
                        revert(0, 4)
                    }
                }
                case 0 {
                    // IERC20(token.get()).safeTransferFrom(payer, msg.sender, amount);
                    mstore(emptyPtr, selectors)
                    emptyPtr := add(emptyPtr, _TRANSFER_FROM_SELECTOR_OFFSET)
                    mstore(add(emptyPtr, 0x04), payer)
                    mstore(add(emptyPtr, 0x24), caller())
                    mstore(add(emptyPtr, 0x44), amount)
                    safeERC20(token, 0, emptyPtr, 0x64, 0x20)
                }
            }
        }
    }
}
// File contracts/AggregationRouterV6.sol
/// @notice Main contract incorporates a number of routers to perform swaps and limit orders protocol to fill limit orders
contract AggregationRouterV6 is EIP712("1inch Aggregation Router", "6"), Ownable, Pausable,
    ClipperRouter, GenericRouter, UnoswapRouter, PermitAndCall, OrderMixin
{
    using UniERC20 for IERC20;
    error ZeroAddress();
    /**
     * @dev Sets the wrapped eth token and clipper exhange interface
     * Both values are immutable: they can only be set once during
     * construction.
     */
    constructor(IWETH weth)
        ClipperRouter(weth)
        OrderMixin(weth)
        Ownable(msg.sender)
    {
        if (address(weth) == address(0)) revert ZeroAddress();
    }
    /**
     * @notice Retrieves funds accidently sent directly to the contract address
     * @param token ERC20 token to retrieve
     * @param amount amount to retrieve
     */
    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(payable(msg.sender), amount);
    }
    /**
     * @notice Pauses all the trading functionality in the contract.
     */
    function pause() external onlyOwner {
        _pause();
    }
    /**
     * @notice Unpauses all the trading functionality in the contract.
     */
    function unpause() external onlyOwner {
        _unpause();
    }
    function _receive() internal override(EthReceiver, OnlyWethReceiver) {
        EthReceiver._receive();
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;

/// @title IProxy - Helper interface to access masterCopy of the Proxy on-chain
/// @author Richard Meissner - <[email protected]>
interface IProxy {
    function masterCopy() external view returns (address);
}

/// @title GnosisSafeProxy - Generic proxy contract allows to execute all transactions applying the code of a master contract.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafeProxy {
    // singleton always needs to be first declared variable, to ensure that it is at the same location in the contracts to which calls are delegated.
    // To reduce deployment costs this variable is internal and needs to be retrieved via `getStorageAt`
    address internal singleton;

    /// @dev Constructor function sets address of singleton contract.
    /// @param _singleton Singleton address.
    constructor(address _singleton) {
        require(_singleton != address(0), "Invalid singleton address provided");
        singleton = _singleton;
    }

    /// @dev Fallback function forwards all transactions and returns all received return data.
    fallback() external payable {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let _singleton := and(sload(0), 0xffffffffffffffffffffffffffffffffffffffff)
            // 0xa619486e == keccak("masterCopy()"). The value is right padded to 32-bytes with 0s
            if eq(calldataload(0), 0xa619486e00000000000000000000000000000000000000000000000000000000) {
                mstore(0, _singleton)
                return(0, 0x20)
            }
            calldatacopy(0, 0, calldatasize())
            let success := delegatecall(gas(), _singleton, 0, calldatasize(), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if eq(success, 0) {
                revert(0, returndatasize())
            }
            return(0, returndatasize())
        }
    }
}

/// @title Proxy Factory - Allows to create new proxy contact and execute a message call to the new proxy within one transaction.
/// @author Stefan George - <[email protected]>
contract GnosisSafeProxyFactory {
    event ProxyCreation(GnosisSafeProxy proxy, address singleton);

    /// @dev Allows to create new proxy contact and execute a message call to the new proxy within one transaction.
    /// @param singleton Address of singleton contract.
    /// @param data Payload for message call sent to new proxy contract.
    function createProxy(address singleton, bytes memory data) public returns (GnosisSafeProxy proxy) {
        proxy = new GnosisSafeProxy(singleton);
        if (data.length > 0)
            // solhint-disable-next-line no-inline-assembly
            assembly {
                if eq(call(gas(), proxy, 0, add(data, 0x20), mload(data), 0, 0), 0) {
                    revert(0, 0)
                }
            }
        emit ProxyCreation(proxy, singleton);
    }

    /// @dev Allows to retrieve the runtime code of a deployed Proxy. This can be used to check that the expected Proxy was deployed.
    function proxyRuntimeCode() public pure returns (bytes memory) {
        return type(GnosisSafeProxy).runtimeCode;
    }

    /// @dev Allows to retrieve the creation code used for the Proxy deployment. With this it is easily possible to calculate predicted address.
    function proxyCreationCode() public pure returns (bytes memory) {
        return type(GnosisSafeProxy).creationCode;
    }

    /// @dev Allows to create new proxy contact using CREATE2 but it doesn't run the initializer.
    ///      This method is only meant as an utility to be called from other methods
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    function deployProxyWithNonce(
        address _singleton,
        bytes memory initializer,
        uint256 saltNonce
    ) internal returns (GnosisSafeProxy proxy) {
        // If the initializer changes the proxy address should change too. Hashing the initializer data is cheaper than just concatinating it
        bytes32 salt = keccak256(abi.encodePacked(keccak256(initializer), saltNonce));
        bytes memory deploymentData = abi.encodePacked(type(GnosisSafeProxy).creationCode, uint256(uint160(_singleton)));
        // solhint-disable-next-line no-inline-assembly
        assembly {
            proxy := create2(0x0, add(0x20, deploymentData), mload(deploymentData), salt)
        }
        require(address(proxy) != address(0), "Create2 call failed");
    }

    /// @dev Allows to create new proxy contact and execute a message call to the new proxy within one transaction.
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    function createProxyWithNonce(
        address _singleton,
        bytes memory initializer,
        uint256 saltNonce
    ) public returns (GnosisSafeProxy proxy) {
        proxy = deployProxyWithNonce(_singleton, initializer, saltNonce);
        if (initializer.length > 0)
            // solhint-disable-next-line no-inline-assembly
            assembly {
                if eq(call(gas(), proxy, 0, add(initializer, 0x20), mload(initializer), 0, 0), 0) {
                    revert(0, 0)
                }
            }
        emit ProxyCreation(proxy, _singleton);
    }

    /// @dev Allows to create new proxy contact, execute a message call to the new proxy and call a specified callback within one transaction
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    /// @param callback Callback that will be invoced after the new proxy contract has been successfully deployed and initialized.
    function createProxyWithCallback(
        address _singleton,
        bytes memory initializer,
        uint256 saltNonce,
        IProxyCreationCallback callback
    ) public returns (GnosisSafeProxy proxy) {
        uint256 saltNonceWithCallback = uint256(keccak256(abi.encodePacked(saltNonce, callback)));
        proxy = createProxyWithNonce(_singleton, initializer, saltNonceWithCallback);
        if (address(callback) != address(0)) callback.proxyCreated(proxy, _singleton, initializer, saltNonce);
    }

    /// @dev Allows to get the address for a new proxy contact created via `createProxyWithNonce`
    ///      This method is only meant for address calculation purpose when you use an initializer that would revert,
    ///      therefore the response is returned with a revert. When calling this method set `from` to the address of the proxy factory.
    /// @param _singleton Address of singleton contract.
    /// @param initializer Payload for message call sent to new proxy contract.
    /// @param saltNonce Nonce that will be used to generate the salt to calculate the address of the new proxy contract.
    function calculateCreateProxyWithNonceAddress(
        address _singleton,
        bytes calldata initializer,
        uint256 saltNonce
    ) external returns (GnosisSafeProxy proxy) {
        proxy = deployProxyWithNonce(_singleton, initializer, saltNonce);
        revert(string(abi.encodePacked(proxy)));
    }
}

interface IProxyCreationCallback {
    function proxyCreated(
        GnosisSafeProxy proxy,
        address _singleton,
        bytes calldata initializer,
        uint256 saltNonce
    ) external;
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// File: contracts/uniswapv2/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function migrator() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
    function setMigrator(address) external;
}

// File: contracts/uniswapv2/libraries/SafeMath.sol

pragma solidity =0.6.12;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMathUniswap {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/uniswapv2/UniswapV2ERC20.sol

pragma solidity =0.6.12;


contract UniswapV2ERC20 {
    using SafeMathUniswap for uint;

    string public constant name = 'SushiSwap LP Token';
    string public constant symbol = 'SLP';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid()
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/uniswapv2/libraries/Math.sol

pragma solidity =0.6.12;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/uniswapv2/libraries/UQ112x112.sol

pragma solidity =0.6.12;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/uniswapv2/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20Uniswap {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/uniswapv2/UniswapV2Pair.sol

pragma solidity =0.6.12;








interface IMigrator {
    // Return the desired amount of liquidity token that the migrator wants.
    function desiredLiquidity() external view returns (uint256);
}

contract UniswapV2Pair is UniswapV2ERC20 {
    using SafeMathUniswap  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20Uniswap(token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            address migrator = IUniswapV2Factory(factory).migrator();
            if (msg.sender == migrator) {
                liquidity = IMigrator(migrator).desiredLiquidity();
                require(liquidity > 0 && liquidity != uint256(-1), "Bad desired liquidity");
            } else {
                require(migrator == address(0), "Must not have migrator");
                liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
                _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
            }
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20Uniswap(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20Uniswap(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20Uniswap(token0).balanceOf(address(this)), IERC20Uniswap(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

// MKR Token

// hevm: flattened sources of src/mkr-499.sol
pragma solidity ^0.4.15;

////// lib/ds-roles/lib/ds-auth/src/auth.sol
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

contract DSAuthority {
    function canCall(
        address src, address dst, bytes4 sig
    ) public view returns (bool);
}

contract DSAuthEvents {
    event LogSetAuthority (address indexed authority);
    event LogSetOwner     (address indexed owner);
}

contract DSAuth is DSAuthEvents {
    DSAuthority  public  authority;
    address      public  owner;

    function DSAuth() public {
        owner = msg.sender;
        LogSetOwner(msg.sender);
    }

    function setOwner(address owner_)
        public
        auth
    {
        owner = owner_;
        LogSetOwner(owner);
    }

    function setAuthority(DSAuthority authority_)
        public
        auth
    {
        authority = authority_;
        LogSetAuthority(authority);
    }

    modifier auth {
        require(isAuthorized(msg.sender, msg.sig));
        _;
    }

    function isAuthorized(address src, bytes4 sig) internal view returns (bool) {
        if (src == address(this)) {
            return true;
        } else if (src == owner) {
            return true;
        } else if (authority == DSAuthority(0)) {
            return false;
        } else {
            return authority.canCall(src, this, sig);
        }
    }
}

////// lib/ds-thing/lib/ds-math/src/math.sol
/// math.sol -- mixin for inline numerical wizardry

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

contract DSMath {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x);
    }
    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x);
    }
    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x);
    }

    function min(uint x, uint y) internal pure returns (uint z) {
        return x <= y ? x : y;
    }
    function max(uint x, uint y) internal pure returns (uint z) {
        return x >= y ? x : y;
    }
    function imin(int x, int y) internal pure returns (int z) {
        return x <= y ? x : y;
    }
    function imax(int x, int y) internal pure returns (int z) {
        return x >= y ? x : y;
    }

    uint constant WAD = 10 ** 18;
    uint constant RAY = 10 ** 27;

    function wmul(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, y), WAD / 2) / WAD;
    }
    function rmul(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, y), RAY / 2) / RAY;
    }
    function wdiv(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, WAD), y / 2) / y;
    }
    function rdiv(uint x, uint y) internal pure returns (uint z) {
        z = add(mul(x, RAY), y / 2) / y;
    }

    // This famous algorithm is called "exponentiation by squaring"
    // and calculates x^n with x as fixed-point and n as regular unsigned.
    //
    // It's O(log n), instead of O(n) for naive repeated multiplication.
    //
    // These facts are why it works:
    //
    //  If n is even, then x^n = (x^2)^(n/2).
    //  If n is odd,  then x^n = x * x^(n-1),
    //   and applying the equation for even x gives
    //    x^n = x * (x^2)^((n-1) / 2).
    //
    //  Also, EVM division is flooring and
    //    floor[(n-1) / 2] = floor[n / 2].
    //
    function rpow(uint x, uint n) internal pure returns (uint z) {
        z = n % 2 != 0 ? x : RAY;

        for (n /= 2; n != 0; n /= 2) {
            x = rmul(x, x);

            if (n % 2 != 0) {
                z = rmul(z, x);
            }
        }
    }
}

////// lib/ds-thing/lib/ds-note/src/note.sol
/// note.sol -- the `note' modifier, for logging calls as events

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

contract DSNote {
    event LogNote(
        bytes4   indexed  sig,
        address  indexed  guy,
        bytes32  indexed  foo,
        bytes32  indexed  bar,
        uint              wad,
        bytes             fax
    ) anonymous;

    modifier note {
        bytes32 foo;
        bytes32 bar;

        assembly {
            foo := calldataload(4)
            bar := calldataload(36)
        }

        LogNote(msg.sig, msg.sender, foo, bar, msg.value, msg.data);

        _;
    }
}

////// lib/ds-thing/src/thing.sol
// thing.sol - `auth` with handy mixins. your things should be DSThings

// Copyright (C) 2017  DappHub, LLC

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

/* import 'ds-auth/auth.sol'; */
/* import 'ds-note/note.sol'; */
/* import 'ds-math/math.sol'; */

contract DSThing is DSAuth, DSNote, DSMath {
}

////// lib/ds-token/lib/ds-stop/src/stop.sol
/// stop.sol -- mixin for enable/disable functionality

// Copyright (C) 2017  DappHub, LLC

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

/* import "ds-auth/auth.sol"; */
/* import "ds-note/note.sol"; */

contract DSStop is DSNote, DSAuth {

    bool public stopped;

    modifier stoppable {
        require(!stopped);
        _;
    }
    function stop() public auth note {
        stopped = true;
    }
    function start() public auth note {
        stopped = false;
    }

}

////// lib/ds-token/lib/erc20/src/erc20.sol
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.8; */

// Token standard API
// https://github.com/ethereum/EIPs/issues/20

contract ERC20 {
    function totalSupply() public view returns (uint supply);
    function balanceOf( address who ) public view returns (uint value);
    function allowance( address owner, address spender ) public view returns (uint _allowance);

    function transfer( address to, uint value) public returns (bool ok);
    function transferFrom( address from, address to, uint value) public returns (bool ok);
    function approve( address spender, uint value ) public returns (bool ok);

    event Transfer( address indexed from, address indexed to, uint value);
    event Approval( address indexed owner, address indexed spender, uint value);
}

////// lib/ds-token/src/base.sol
/// base.sol -- basic ERC20 implementation

// Copyright (C) 2015, 2016, 2017  DappHub, LLC

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

/* import "erc20/erc20.sol"; */
/* import "ds-math/math.sol"; */

contract DSTokenBase is ERC20, DSMath {
    uint256                                            _supply;
    mapping (address => uint256)                       _balances;
    mapping (address => mapping (address => uint256))  _approvals;

    function DSTokenBase(uint supply) public {
        _balances[msg.sender] = supply;
        _supply = supply;
    }

    function totalSupply() public view returns (uint) {
        return _supply;
    }
    function balanceOf(address src) public view returns (uint) {
        return _balances[src];
    }
    function allowance(address src, address guy) public view returns (uint) {
        return _approvals[src][guy];
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        if (src != msg.sender) {
            _approvals[src][msg.sender] = sub(_approvals[src][msg.sender], wad);
        }

        _balances[src] = sub(_balances[src], wad);
        _balances[dst] = add(_balances[dst], wad);

        Transfer(src, dst, wad);

        return true;
    }

    function approve(address guy, uint wad) public returns (bool) {
        _approvals[msg.sender][guy] = wad;

        Approval(msg.sender, guy, wad);

        return true;
    }
}

////// lib/ds-token/src/token.sol
/// token.sol -- ERC20 implementation with minting and burning

// Copyright (C) 2015, 2016, 2017  DappHub, LLC

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity ^0.4.13; */

/* import "ds-stop/stop.sol"; */

/* import "./base.sol"; */

contract DSToken is DSTokenBase(0), DSStop {

    bytes32  public  symbol;
    uint256  public  decimals = 18; // standard token precision. override to customize

    function DSToken(bytes32 symbol_) public {
        symbol = symbol_;
    }

    event Mint(address indexed guy, uint wad);
    event Burn(address indexed guy, uint wad);

    function approve(address guy) public stoppable returns (bool) {
        return super.approve(guy, uint(-1));
    }

    function approve(address guy, uint wad) public stoppable returns (bool) {
        return super.approve(guy, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        stoppable
        returns (bool)
    {
        if (src != msg.sender && _approvals[src][msg.sender] != uint(-1)) {
            _approvals[src][msg.sender] = sub(_approvals[src][msg.sender], wad);
        }

        _balances[src] = sub(_balances[src], wad);
        _balances[dst] = add(_balances[dst], wad);

        Transfer(src, dst, wad);

        return true;
    }

    function push(address dst, uint wad) public {
        transferFrom(msg.sender, dst, wad);
    }
    function pull(address src, uint wad) public {
        transferFrom(src, msg.sender, wad);
    }
    function move(address src, address dst, uint wad) public {
        transferFrom(src, dst, wad);
    }

    function mint(uint wad) public {
        mint(msg.sender, wad);
    }
    function burn(uint wad) public {
        burn(msg.sender, wad);
    }
    function mint(address guy, uint wad) public auth stoppable {
        _balances[guy] = add(_balances[guy], wad);
        _supply = add(_supply, wad);
        Mint(guy, wad);
    }
    function burn(address guy, uint wad) public auth stoppable {
        if (guy != msg.sender && _approvals[guy][msg.sender] != uint(-1)) {
            _approvals[guy][msg.sender] = sub(_approvals[guy][msg.sender], wad);
        }

        _balances[guy] = sub(_balances[guy], wad);
        _supply = sub(_supply, wad);
        Burn(guy, wad);
    }

    // Optional token name
    bytes32   public  name = "";

    function setName(bytes32 name_) public auth {
        name = name_;
    }
}

// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./base/ModuleManager.sol";
import "./base/OwnerManager.sol";
import "./base/FallbackManager.sol";
import "./base/GuardManager.sol";
import "./common/EtherPaymentFallback.sol";
import "./common/Singleton.sol";
import "./common/SignatureDecoder.sol";
import "./common/SecuredTokenTransfer.sol";
import "./common/StorageAccessible.sol";
import "./interfaces/ISignatureValidator.sol";
import "./external/GnosisSafeMath.sol";
/// @title Gnosis Safe - A multisignature wallet with support for confirmations using signed messages based on ERC191.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafe is
    EtherPaymentFallback,
    Singleton,
    ModuleManager,
    OwnerManager,
    SignatureDecoder,
    SecuredTokenTransfer,
    ISignatureValidatorConstants,
    FallbackManager,
    StorageAccessible,
    GuardManager
{
    using GnosisSafeMath for uint256;
    string public constant VERSION = "1.3.0";
    // keccak256(
    //     "EIP712Domain(uint256 chainId,address verifyingContract)"
    // );
    bytes32 private constant DOMAIN_SEPARATOR_TYPEHASH = 0x47e79534a245952e8b16893a336b85a3d9ea9fa8c573f3d803afb92a79469218;
    // keccak256(
    //     "SafeTx(address to,uint256 value,bytes data,uint8 operation,uint256 safeTxGas,uint256 baseGas,uint256 gasPrice,address gasToken,address refundReceiver,uint256 nonce)"
    // );
    bytes32 private constant SAFE_TX_TYPEHASH = 0xbb8310d486368db6bd6f849402fdd73ad53d316b5a4b2644ad6efe0f941286d8;
    event SafeSetup(address indexed initiator, address[] owners, uint256 threshold, address initializer, address fallbackHandler);
    event ApproveHash(bytes32 indexed approvedHash, address indexed owner);
    event SignMsg(bytes32 indexed msgHash);
    event ExecutionFailure(bytes32 txHash, uint256 payment);
    event ExecutionSuccess(bytes32 txHash, uint256 payment);
    uint256 public nonce;
    bytes32 private _deprecatedDomainSeparator;
    // Mapping to keep track of all message hashes that have been approve by ALL REQUIRED owners
    mapping(bytes32 => uint256) public signedMessages;
    // Mapping to keep track of all hashes (message or transaction) that have been approve by ANY owners
    mapping(address => mapping(bytes32 => uint256)) public approvedHashes;
    // This constructor ensures that this contract can only be used as a master copy for Proxy contracts
    constructor() {
        // By setting the threshold it is not possible to call setup anymore,
        // so we create a Safe with 0 owners and threshold 1.
        // This is an unusable Safe, perfect for the singleton
        threshold = 1;
    }
    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    /// @param to Contract address for optional delegate call.
    /// @param data Data payload for optional delegate call.
    /// @param fallbackHandler Handler for fallback calls to this contract
    /// @param paymentToken Token that should be used for the payment (0 is ETH)
    /// @param payment Value that should be paid
    /// @param paymentReceiver Adddress that should receive the payment (or 0 if tx.origin)
    function setup(
        address[] calldata _owners,
        uint256 _threshold,
        address to,
        bytes calldata data,
        address fallbackHandler,
        address paymentToken,
        uint256 payment,
        address payable paymentReceiver
    ) external {
        // setupOwners checks if the Threshold is already set, therefore preventing that this method is called twice
        setupOwners(_owners, _threshold);
        if (fallbackHandler != address(0)) internalSetFallbackHandler(fallbackHandler);
        // As setupOwners can only be called if the contract has not been initialized we don't need a check for setupModules
        setupModules(to, data);
        if (payment > 0) {
            // To avoid running into issues with EIP-170 we reuse the handlePayment function (to avoid adjusting code of that has been verified we do not adjust the method itself)
            // baseGas = 0, gasPrice = 1 and gas = payment => amount = (payment + 0) * 1 = payment
            handlePayment(payment, 0, 1, paymentToken, paymentReceiver);
        }
        emit SafeSetup(msg.sender, _owners, _threshold, to, fallbackHandler);
    }
    /// @dev Allows to execute a Safe transaction confirmed by required number of owners and then pays the account that submitted the transaction.
    ///      Note: The fees are always transferred, even if the user transaction fails.
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @param safeTxGas Gas that should be used for the Safe transaction.
    /// @param baseGas Gas costs that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Gas price that should be used for the payment calculation.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param signatures Packed signature data ({bytes32 r}{bytes32 s}{uint8 v})
    function execTransaction(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures
    ) public payable virtual returns (bool success) {
        bytes32 txHash;
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            bytes memory txHashData =
                encodeTransactionData(
                    // Transaction info
                    to,
                    value,
                    data,
                    operation,
                    safeTxGas,
                    // Payment info
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    // Signature info
                    nonce
                );
            // Increase nonce and execute transaction.
            nonce++;
            txHash = keccak256(txHashData);
            checkSignatures(txHash, txHashData, signatures);
        }
        address guard = getGuard();
        {
            if (guard != address(0)) {
                Guard(guard).checkTransaction(
                    // Transaction info
                    to,
                    value,
                    data,
                    operation,
                    safeTxGas,
                    // Payment info
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    // Signature info
                    signatures,
                    msg.sender
                );
            }
        }
        // We require some gas to emit the events (at least 2500) after the execution and some to perform code until the execution (500)
        // We also include the 1/64 in the check that is not send along with a call to counteract potential shortings because of EIP-150
        require(gasleft() >= ((safeTxGas * 64) / 63).max(safeTxGas + 2500) + 500, "GS010");
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            uint256 gasUsed = gasleft();
            // If the gasPrice is 0 we assume that nearly all available gas can be used (it is always more than safeTxGas)
            // We only substract 2500 (compared to the 3000 before) to ensure that the amount passed is still higher than safeTxGas
            success = execute(to, value, data, operation, gasPrice == 0 ? (gasleft() - 2500) : safeTxGas);
            gasUsed = gasUsed.sub(gasleft());
            // If no safeTxGas and no gasPrice was set (e.g. both are 0), then the internal tx is required to be successful
            // This makes it possible to use `estimateGas` without issues, as it searches for the minimum gas where the tx doesn't revert
            require(success || safeTxGas != 0 || gasPrice != 0, "GS013");
            // We transfer the calculated tx costs to the tx.origin to avoid sending it to intermediate contracts that have made calls
            uint256 payment = 0;
            if (gasPrice > 0) {
                payment = handlePayment(gasUsed, baseGas, gasPrice, gasToken, refundReceiver);
            }
            if (success) emit ExecutionSuccess(txHash, payment);
            else emit ExecutionFailure(txHash, payment);
        }
        {
            if (guard != address(0)) {
                Guard(guard).checkAfterExecution(txHash, success);
            }
        }
    }
    function handlePayment(
        uint256 gasUsed,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver
    ) private returns (uint256 payment) {
        // solhint-disable-next-line avoid-tx-origin
        address payable receiver = refundReceiver == address(0) ? payable(tx.origin) : refundReceiver;
        if (gasToken == address(0)) {
            // For ETH we will only adjust the gas price to not be higher than the actual used gas price
            payment = gasUsed.add(baseGas).mul(gasPrice < tx.gasprice ? gasPrice : tx.gasprice);
            require(receiver.send(payment), "GS011");
        } else {
            payment = gasUsed.add(baseGas).mul(gasPrice);
            require(transferToken(gasToken, receiver, payment), "GS012");
        }
    }
    /**
     * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
     * @param dataHash Hash of the data (could be either a message hash or transaction hash)
     * @param data That should be signed (this is passed to an external validator contract)
     * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
     */
    function checkSignatures(
        bytes32 dataHash,
        bytes memory data,
        bytes memory signatures
    ) public view {
        // Load threshold to avoid multiple storage loads
        uint256 _threshold = threshold;
        // Check that a threshold is set
        require(_threshold > 0, "GS001");
        checkNSignatures(dataHash, data, signatures, _threshold);
    }
    /**
     * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
     * @param dataHash Hash of the data (could be either a message hash or transaction hash)
     * @param data That should be signed (this is passed to an external validator contract)
     * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
     * @param requiredSignatures Amount of required valid signatures.
     */
    function checkNSignatures(
        bytes32 dataHash,
        bytes memory data,
        bytes memory signatures,
        uint256 requiredSignatures
    ) public view {
        // Check that the provided signature data is not too short
        require(signatures.length >= requiredSignatures.mul(65), "GS020");
        // There cannot be an owner with address 0.
        address lastOwner = address(0);
        address currentOwner;
        uint8 v;
        bytes32 r;
        bytes32 s;
        uint256 i;
        for (i = 0; i < requiredSignatures; i++) {
            (v, r, s) = signatureSplit(signatures, i);
            if (v == 0) {
                // If v is 0 then it is a contract signature
                // When handling contract signatures the address of the contract is encoded into r
                currentOwner = address(uint160(uint256(r)));
                // Check that signature data pointer (s) is not pointing inside the static part of the signatures bytes
                // This check is not completely accurate, since it is possible that more signatures than the threshold are send.
                // Here we only check that the pointer is not pointing inside the part that is being processed
                require(uint256(s) >= requiredSignatures.mul(65), "GS021");
                // Check that signature data pointer (s) is in bounds (points to the length of data -> 32 bytes)
                require(uint256(s).add(32) <= signatures.length, "GS022");
                // Check if the contract signature is in bounds: start of data is s + 32 and end is start + signature length
                uint256 contractSignatureLen;
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    contractSignatureLen := mload(add(add(signatures, s), 0x20))
                }
                require(uint256(s).add(32).add(contractSignatureLen) <= signatures.length, "GS023");
                // Check signature
                bytes memory contractSignature;
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    // The signature data for contract signatures is appended to the concatenated signatures and the offset is stored in s
                    contractSignature := add(add(signatures, s), 0x20)
                }
                require(ISignatureValidator(currentOwner).isValidSignature(data, contractSignature) == EIP1271_MAGIC_VALUE, "GS024");
            } else if (v == 1) {
                // If v is 1 then it is an approved hash
                // When handling approved hashes the address of the approver is encoded into r
                currentOwner = address(uint160(uint256(r)));
                // Hashes are automatically approved by the sender of the message or when they have been pre-approved via a separate transaction
                require(msg.sender == currentOwner || approvedHashes[currentOwner][dataHash] != 0, "GS025");
            } else if (v > 30) {
                // If v > 30 then default va (27,28) has been adjusted for eth_sign flow
                // To support eth_sign and similar we adjust v and hash the messageHash with the Ethereum message prefix before applying ecrecover
                currentOwner = ecrecover(keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", dataHash)), v - 4, r, s);
            } else {
                // Default is the ecrecover flow with the provided data hash
                // Use ecrecover with the messageHash for EOA signatures
                currentOwner = ecrecover(dataHash, v, r, s);
            }
            require(currentOwner > lastOwner && owners[currentOwner] != address(0) && currentOwner != SENTINEL_OWNERS, "GS026");
            lastOwner = currentOwner;
        }
    }
    /// @dev Allows to estimate a Safe transaction.
    ///      This method is only meant for estimation purpose, therefore the call will always revert and encode the result in the revert data.
    ///      Since the `estimateGas` function includes refunds, call this method to get an estimated of the costs that are deducted from the safe with `execTransaction`
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @return Estimate without refunds and overhead fees (base transaction and payload data gas costs).
    /// @notice Deprecated in favor of common/StorageAccessible.sol and will be removed in next version.
    function requiredTxGas(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation
    ) external returns (uint256) {
        uint256 startGas = gasleft();
        // We don't provide an error message here, as we use it to return the estimate
        require(execute(to, value, data, operation, gasleft()));
        uint256 requiredGas = startGas - gasleft();
        // Convert response to string and return via error message
        revert(string(abi.encodePacked(requiredGas)));
    }
    /**
     * @dev Marks a hash as approved. This can be used to validate a hash that is used by a signature.
     * @param hashToApprove The hash that should be marked as approved for signatures that are verified by this contract.
     */
    function approveHash(bytes32 hashToApprove) external {
        require(owners[msg.sender] != address(0), "GS030");
        approvedHashes[msg.sender][hashToApprove] = 1;
        emit ApproveHash(hashToApprove, msg.sender);
    }
    /// @dev Returns the chain id used by this contract.
    function getChainId() public view returns (uint256) {
        uint256 id;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            id := chainid()
        }
        return id;
    }
    function domainSeparator() public view returns (bytes32) {
        return keccak256(abi.encode(DOMAIN_SEPARATOR_TYPEHASH, getChainId(), this));
    }
    /// @dev Returns the bytes that are hashed to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Gas that should be used for the safe transaction.
    /// @param baseGas Gas costs for that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash bytes.
    function encodeTransactionData(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    ) public view returns (bytes memory) {
        bytes32 safeTxHash =
            keccak256(
                abi.encode(
                    SAFE_TX_TYPEHASH,
                    to,
                    value,
                    keccak256(data),
                    operation,
                    safeTxGas,
                    baseGas,
                    gasPrice,
                    gasToken,
                    refundReceiver,
                    _nonce
                )
            );
        return abi.encodePacked(bytes1(0x19), bytes1(0x01), domainSeparator(), safeTxHash);
    }
    /// @dev Returns hash to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Fas that should be used for the safe transaction.
    /// @param baseGas Gas costs for data used to trigger the safe transaction.
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash.
    function getTransactionHash(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    ) public view returns (bytes32) {
        return keccak256(encodeTransactionData(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, _nonce));
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "./GnosisSafe.sol";
/// @title Gnosis Safe - A multisignature wallet with support for confirmations using signed messages based on ERC191.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract GnosisSafeL2 is GnosisSafe {
    event SafeMultiSigTransaction(
        address to,
        uint256 value,
        bytes data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes signatures,
        // We combine nonce, sender and threshold into one to avoid stack too deep
        // Dev note: additionalInfo should not contain `bytes`, as this complicates decoding
        bytes additionalInfo
    );
    event SafeModuleTransaction(address module, address to, uint256 value, bytes data, Enum.Operation operation);
    /// @dev Allows to execute a Safe transaction confirmed by required number of owners and then pays the account that submitted the transaction.
    ///      Note: The fees are always transferred, even if the user transaction fails.
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @param safeTxGas Gas that should be used for the Safe transaction.
    /// @param baseGas Gas costs that are independent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Gas price that should be used for the payment calculation.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param signatures Packed signature data ({bytes32 r}{bytes32 s}{uint8 v})
    function execTransaction(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures
    ) public payable override returns (bool) {
        bytes memory additionalInfo;
        {
            additionalInfo = abi.encode(nonce, msg.sender, threshold);
        }
        emit SafeMultiSigTransaction(
            to,
            value,
            data,
            operation,
            safeTxGas,
            baseGas,
            gasPrice,
            gasToken,
            refundReceiver,
            signatures,
            additionalInfo
        );
        return super.execTransaction(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, signatures);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations.
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModule(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public override returns (bool success) {
        emit SafeModuleTransaction(msg.sender, to, value, data, operation);
        success = super.execTransactionFromModule(to, value, data, operation);
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
/// @title Executor - A contract that can execute transactions
/// @author Richard Meissner - <[email protected]>
contract Executor {
    function execute(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 txGas
    ) internal returns (bool success) {
        if (operation == Enum.Operation.DelegateCall) {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                success := delegatecall(txGas, to, add(data, 0x20), mload(data), 0, 0)
            }
        } else {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                success := call(txGas, to, value, add(data, 0x20), mload(data), 0, 0)
            }
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract FallbackManager is SelfAuthorized {
    event ChangedFallbackHandler(address handler);
    // keccak256("fallback_manager.handler.address")
    bytes32 internal constant FALLBACK_HANDLER_STORAGE_SLOT = 0x6c9a6c4a39284e37ed1cf53d337577d14212a4870fb976a4366c693b939918d5;
    function internalSetFallbackHandler(address handler) internal {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, handler)
        }
    }
    /// @dev Allows to add a contract to handle fallback calls.
    ///      Only fallback calls without value and with data will be forwarded.
    ///      This can only be done via a Safe transaction.
    /// @param handler contract to handle fallbacks calls.
    function setFallbackHandler(address handler) public authorized {
        internalSetFallbackHandler(handler);
        emit ChangedFallbackHandler(handler);
    }
    // solhint-disable-next-line payable-fallback,no-complex-fallback
    fallback() external {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let handler := sload(slot)
            if iszero(handler) {
                return(0, 0)
            }
            calldatacopy(0, 0, calldatasize())
            // The msg.sender address is shifted to the left by 12 bytes to remove the padding
            // Then the address without padding is stored right after the calldata
            mstore(calldatasize(), shl(96, caller()))
            // Add 20 bytes for the address appended add the end
            let success := call(gas(), handler, 0, 0, add(calldatasize(), 20), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if iszero(success) {
                revert(0, returndatasize())
            }
            return(0, returndatasize())
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
interface Guard {
    function checkTransaction(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes memory signatures,
        address msgSender
    ) external;
    function checkAfterExecution(bytes32 txHash, bool success) external;
}
/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract GuardManager is SelfAuthorized {
    event ChangedGuard(address guard);
    // keccak256("guard_manager.guard.address")
    bytes32 internal constant GUARD_STORAGE_SLOT = 0x4a204f620c8c5ccdca3fd54d003badd85ba500436a431f0cbda4f558c93c34c8;
    /// @dev Set a guard that checks transactions before execution
    /// @param guard The address of the guard to be used or the 0 address to disable the guard
    function setGuard(address guard) external authorized {
        bytes32 slot = GUARD_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, guard)
        }
        emit ChangedGuard(guard);
    }
    function getGuard() internal view returns (address guard) {
        bytes32 slot = GUARD_STORAGE_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            guard := sload(slot)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/Enum.sol";
import "../common/SelfAuthorized.sol";
import "./Executor.sol";
/// @title Module Manager - A contract that manages modules that can execute transactions via this contract
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract ModuleManager is SelfAuthorized, Executor {
    event EnabledModule(address module);
    event DisabledModule(address module);
    event ExecutionFromModuleSuccess(address indexed module);
    event ExecutionFromModuleFailure(address indexed module);
    address internal constant SENTINEL_MODULES = address(0x1);
    mapping(address => address) internal modules;
    function setupModules(address to, bytes memory data) internal {
        require(modules[SENTINEL_MODULES] == address(0), "GS100");
        modules[SENTINEL_MODULES] = SENTINEL_MODULES;
        if (to != address(0))
            // Setup has to complete successfully or transaction fails.
            require(execute(to, 0, data, Enum.Operation.DelegateCall, gasleft()), "GS000");
    }
    /// @dev Allows to add a module to the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @notice Enables the module `module` for the Safe.
    /// @param module Module to be whitelisted.
    function enableModule(address module) public authorized {
        // Module address cannot be null or sentinel.
        require(module != address(0) && module != SENTINEL_MODULES, "GS101");
        // Module cannot be added twice.
        require(modules[module] == address(0), "GS102");
        modules[module] = modules[SENTINEL_MODULES];
        modules[SENTINEL_MODULES] = module;
        emit EnabledModule(module);
    }
    /// @dev Allows to remove a module from the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @notice Disables the module `module` for the Safe.
    /// @param prevModule Module that pointed to the module to be removed in the linked list
    /// @param module Module to be removed.
    function disableModule(address prevModule, address module) public authorized {
        // Validate module address and check that it corresponds to module index.
        require(module != address(0) && module != SENTINEL_MODULES, "GS101");
        require(modules[prevModule] == module, "GS103");
        modules[prevModule] = modules[module];
        modules[module] = address(0);
        emit DisabledModule(module);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations.
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModule(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public virtual returns (bool success) {
        // Only whitelisted modules are allowed.
        require(msg.sender != SENTINEL_MODULES && modules[msg.sender] != address(0), "GS104");
        // Execute transaction without further confirmations.
        success = execute(to, value, data, operation, gasleft());
        if (success) emit ExecutionFromModuleSuccess(msg.sender);
        else emit ExecutionFromModuleFailure(msg.sender);
    }
    /// @dev Allows a Module to execute a Safe transaction without any further confirmations and return data
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModuleReturnData(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation
    ) public returns (bool success, bytes memory returnData) {
        success = execTransactionFromModule(to, value, data, operation);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Load free memory location
            let ptr := mload(0x40)
            // We allocate memory for the return data by setting the free memory location to
            // current free memory location + data size + 32 bytes for data size value
            mstore(0x40, add(ptr, add(returndatasize(), 0x20)))
            // Store the size
            mstore(ptr, returndatasize())
            // Store the data
            returndatacopy(add(ptr, 0x20), 0, returndatasize())
            // Point the return data to the correct memory location
            returnData := ptr
        }
    }
    /// @dev Returns if an module is enabled
    /// @return True if the module is enabled
    function isModuleEnabled(address module) public view returns (bool) {
        return SENTINEL_MODULES != module && modules[module] != address(0);
    }
    /// @dev Returns array of modules.
    /// @param start Start of the page.
    /// @param pageSize Maximum number of modules that should be returned.
    /// @return array Array of modules.
    /// @return next Start of the next page.
    function getModulesPaginated(address start, uint256 pageSize) external view returns (address[] memory array, address next) {
        // Init array with max page size
        array = new address[](pageSize);
        // Populate return array
        uint256 moduleCount = 0;
        address currentModule = modules[start];
        while (currentModule != address(0x0) && currentModule != SENTINEL_MODULES && moduleCount < pageSize) {
            array[moduleCount] = currentModule;
            currentModule = modules[currentModule];
            moduleCount++;
        }
        next = currentModule;
        // Set correct size of returned array
        // solhint-disable-next-line no-inline-assembly
        assembly {
            mstore(array, moduleCount)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
import "../common/SelfAuthorized.sol";
/// @title OwnerManager - Manages a set of owners and a threshold to perform actions.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract OwnerManager is SelfAuthorized {
    event AddedOwner(address owner);
    event RemovedOwner(address owner);
    event ChangedThreshold(uint256 threshold);
    address internal constant SENTINEL_OWNERS = address(0x1);
    mapping(address => address) internal owners;
    uint256 internal ownerCount;
    uint256 internal threshold;
    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    function setupOwners(address[] memory _owners, uint256 _threshold) internal {
        // Threshold can only be 0 at initialization.
        // Check ensures that setup function can only be called once.
        require(threshold == 0, "GS200");
        // Validate that threshold is smaller than number of added owners.
        require(_threshold <= _owners.length, "GS201");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "GS202");
        // Initializing Safe owners.
        address currentOwner = SENTINEL_OWNERS;
        for (uint256 i = 0; i < _owners.length; i++) {
            // Owner address cannot be null.
            address owner = _owners[i];
            require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this) && currentOwner != owner, "GS203");
            // No duplicate owners allowed.
            require(owners[owner] == address(0), "GS204");
            owners[currentOwner] = owner;
            currentOwner = owner;
        }
        owners[currentOwner] = SENTINEL_OWNERS;
        ownerCount = _owners.length;
        threshold = _threshold;
    }
    /// @dev Allows to add a new owner to the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @notice Adds the owner `owner` to the Safe and updates the threshold to `_threshold`.
    /// @param owner New owner address.
    /// @param _threshold New threshold.
    function addOwnerWithThreshold(address owner, uint256 _threshold) public authorized {
        // Owner address cannot be null, the sentinel or the Safe itself.
        require(owner != address(0) && owner != SENTINEL_OWNERS && owner != address(this), "GS203");
        // No duplicate owners allowed.
        require(owners[owner] == address(0), "GS204");
        owners[owner] = owners[SENTINEL_OWNERS];
        owners[SENTINEL_OWNERS] = owner;
        ownerCount++;
        emit AddedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold) changeThreshold(_threshold);
    }
    /// @dev Allows to remove an owner from the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @notice Removes the owner `owner` from the Safe and updates the threshold to `_threshold`.
    /// @param prevOwner Owner that pointed to the owner to be removed in the linked list
    /// @param owner Owner address to be removed.
    /// @param _threshold New threshold.
    function removeOwner(
        address prevOwner,
        address owner,
        uint256 _threshold
    ) public authorized {
        // Only allow to remove an owner, if threshold can still be reached.
        require(ownerCount - 1 >= _threshold, "GS201");
        // Validate owner address and check that it corresponds to owner index.
        require(owner != address(0) && owner != SENTINEL_OWNERS, "GS203");
        require(owners[prevOwner] == owner, "GS205");
        owners[prevOwner] = owners[owner];
        owners[owner] = address(0);
        ownerCount--;
        emit RemovedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold) changeThreshold(_threshold);
    }
    /// @dev Allows to swap/replace an owner from the Safe with another address.
    ///      This can only be done via a Safe transaction.
    /// @notice Replaces the owner `oldOwner` in the Safe with `newOwner`.
    /// @param prevOwner Owner that pointed to the owner to be replaced in the linked list
    /// @param oldOwner Owner address to be replaced.
    /// @param newOwner New owner address.
    function swapOwner(
        address prevOwner,
        address oldOwner,
        address newOwner
    ) public authorized {
        // Owner address cannot be null, the sentinel or the Safe itself.
        require(newOwner != address(0) && newOwner != SENTINEL_OWNERS && newOwner != address(this), "GS203");
        // No duplicate owners allowed.
        require(owners[newOwner] == address(0), "GS204");
        // Validate oldOwner address and check that it corresponds to owner index.
        require(oldOwner != address(0) && oldOwner != SENTINEL_OWNERS, "GS203");
        require(owners[prevOwner] == oldOwner, "GS205");
        owners[newOwner] = owners[oldOwner];
        owners[prevOwner] = newOwner;
        owners[oldOwner] = address(0);
        emit RemovedOwner(oldOwner);
        emit AddedOwner(newOwner);
    }
    /// @dev Allows to update the number of required confirmations by Safe owners.
    ///      This can only be done via a Safe transaction.
    /// @notice Changes the threshold of the Safe to `_threshold`.
    /// @param _threshold New threshold.
    function changeThreshold(uint256 _threshold) public authorized {
        // Validate that threshold is smaller than number of owners.
        require(_threshold <= ownerCount, "GS201");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "GS202");
        threshold = _threshold;
        emit ChangedThreshold(threshold);
    }
    function getThreshold() public view returns (uint256) {
        return threshold;
    }
    function isOwner(address owner) public view returns (bool) {
        return owner != SENTINEL_OWNERS && owners[owner] != address(0);
    }
    /// @dev Returns array of owners.
    /// @return Array of Safe owners.
    function getOwners() public view returns (address[] memory) {
        address[] memory array = new address[](ownerCount);
        // populate return array
        uint256 index = 0;
        address currentOwner = owners[SENTINEL_OWNERS];
        while (currentOwner != SENTINEL_OWNERS) {
            array[index] = currentOwner;
            currentOwner = owners[currentOwner];
            index++;
        }
        return array;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title Enum - Collection of enums
/// @author Richard Meissner - <[email protected]>
contract Enum {
    enum Operation {Call, DelegateCall}
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title EtherPaymentFallback - A contract that has a fallback to accept ether payments
/// @author Richard Meissner - <[email protected]>
contract EtherPaymentFallback {
    event SafeReceived(address indexed sender, uint256 value);
    /// @dev Fallback function accepts Ether transactions.
    receive() external payable {
        emit SafeReceived(msg.sender, msg.value);
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SecuredTokenTransfer - Secure token transfer
/// @author Richard Meissner - <[email protected]>
contract SecuredTokenTransfer {
    /// @dev Transfers a token and returns if it was a success
    /// @param token Token that should be transferred
    /// @param receiver Receiver to whom the token should be transferred
    /// @param amount The amount of tokens that should be transferred
    function transferToken(
        address token,
        address receiver,
        uint256 amount
    ) internal returns (bool transferred) {
        // 0xa9059cbb - keccack("transfer(address,uint256)")
        bytes memory data = abi.encodeWithSelector(0xa9059cbb, receiver, amount);
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // We write the return value to scratch space.
            // See https://docs.soliditylang.org/en/v0.7.6/internals/layout_in_memory.html#layout-in-memory
            let success := call(sub(gas(), 10000), token, 0, add(data, 0x20), mload(data), 0, 0x20)
            switch returndatasize()
                case 0 {
                    transferred := success
                }
                case 0x20 {
                    transferred := iszero(or(iszero(success), iszero(mload(0))))
                }
                default {
                    transferred := 0
                }
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SelfAuthorized - authorizes current contract to perform actions
/// @author Richard Meissner - <[email protected]>
contract SelfAuthorized {
    function requireSelfCall() private view {
        require(msg.sender == address(this), "GS031");
    }
    modifier authorized() {
        // This is a function call as it minimized the bytecode size
        requireSelfCall();
        _;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title SignatureDecoder - Decodes signatures that a encoded as bytes
/// @author Richard Meissner - <[email protected]>
contract SignatureDecoder {
    /// @dev divides bytes signature into `uint8 v, bytes32 r, bytes32 s`.
    /// @notice Make sure to peform a bounds check for @param pos, to avoid out of bounds access on @param signatures
    /// @param pos which signature to read. A prior bounds check of this parameter should be performed, to avoid out of bounds access
    /// @param signatures concatenated rsv signatures
    function signatureSplit(bytes memory signatures, uint256 pos)
        internal
        pure
        returns (
            uint8 v,
            bytes32 r,
            bytes32 s
        )
    {
        // The signature format is a compact form of:
        //   {bytes32 r}{bytes32 s}{uint8 v}
        // Compact means, uint8 is not padded to 32 bytes.
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let signaturePos := mul(0x41, pos)
            r := mload(add(signatures, add(signaturePos, 0x20)))
            s := mload(add(signatures, add(signaturePos, 0x40)))
            // Here we are loading the last 32 bytes, including 31 bytes
            // of 's'. There is no 'mload8' to do this.
            //
            // 'byte' is not working due to the Solidity parser, so lets
            // use the second best option, 'and'
            v := and(mload(add(signatures, add(signaturePos, 0x41))), 0xff)
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title Singleton - Base for singleton contracts (should always be first super contract)
///         This contract is tightly coupled to our proxy contract (see `proxies/GnosisSafeProxy.sol`)
/// @author Richard Meissner - <[email protected]>
contract Singleton {
    // singleton always needs to be first declared variable, to ensure that it is at the same location as in the Proxy contract.
    // It should also always be ensured that the address is stored alone (uses a full word)
    address private singleton;
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/// @title StorageAccessible - generic base contract that allows callers to access all internal storage.
/// @notice See https://github.com/gnosis/util-contracts/blob/bb5fe5fb5df6d8400998094fb1b32a178a47c3a1/contracts/StorageAccessible.sol
contract StorageAccessible {
    /**
     * @dev Reads `length` bytes of storage in the currents contract
     * @param offset - the offset in the current contract's storage in words to start reading from
     * @param length - the number of words (32 bytes) of data to read
     * @return the bytes that were read.
     */
    function getStorageAt(uint256 offset, uint256 length) public view returns (bytes memory) {
        bytes memory result = new bytes(length * 32);
        for (uint256 index = 0; index < length; index++) {
            // solhint-disable-next-line no-inline-assembly
            assembly {
                let word := sload(add(offset, index))
                mstore(add(add(result, 0x20), mul(index, 0x20)), word)
            }
        }
        return result;
    }
    /**
     * @dev Performs a delegetecall on a targetContract in the context of self.
     * Internally reverts execution to avoid side effects (making it static).
     *
     * This method reverts with data equal to `abi.encode(bool(success), bytes(response))`.
     * Specifically, the `returndata` after a call to this method will be:
     * `success:bool || response.length:uint256 || response:bytes`.
     *
     * @param targetContract Address of the contract containing the code to execute.
     * @param calldataPayload Calldata that should be sent to the target contract (encoded method name and arguments).
     */
    function simulateAndRevert(address targetContract, bytes memory calldataPayload) external {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            let success := delegatecall(gas(), targetContract, add(calldataPayload, 0x20), mload(calldataPayload), 0, 0)
            mstore(0x00, success)
            mstore(0x20, returndatasize())
            returndatacopy(0x40, 0, returndatasize())
            revert(0, add(returndatasize(), 0x40))
        }
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
/**
 * @title GnosisSafeMath
 * @dev Math operations with safety checks that revert on error
 * Renamed from SafeMath to GnosisSafeMath to avoid conflicts
 * TODO: remove once open zeppelin update to solc 0.5.0
 */
library GnosisSafeMath {
    /**
     * @dev Multiplies two numbers, reverts on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b);
        return c;
    }
    /**
     * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Adds two numbers, reverts on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);
        return c;
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
}
// SPDX-License-Identifier: LGPL-3.0-only
pragma solidity >=0.7.0 <0.9.0;
contract ISignatureValidatorConstants {
    // bytes4(keccak256("isValidSignature(bytes,bytes)")
    bytes4 internal constant EIP1271_MAGIC_VALUE = 0x20c13b0b;
}
abstract contract ISignatureValidator is ISignatureValidatorConstants {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param _data Arbitrary length data signed on the behalf of address(this)
     * @param _signature Signature byte array associated with _data
     *
     * MUST return the bytes4 magic value 0x20c13b0b when function passes.
     * MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
     * MUST allow external calls
     */
    function isValidSignature(bytes memory _data, bytes memory _signature) public view virtual returns (bytes4);
}