// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.24;
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
contract RedSnwapper {
  using SafeERC20 for IERC20;
  using Utils for IERC20;
  SafeExecutor public immutable safeExecutor;
  constructor() {
    safeExecutor = new SafeExecutor();
  }
  // @notice Swaps tokens
  // @notice 1. Transfers amountIn of tokens tokenIn to executor
  // @notice 2. launches executor with executorData and value = msg.value
  // @notice 3. Checks that recipient's tokenOut balance was increased at least amountOutMin
  function snwap(
    IERC20 tokenIn,
    uint amountIn, // if amountIn == 0 then amountIn = tokenIn.balance(this) - 1
    address recipient,
    IERC20 tokenOut,
    uint amountOutMin,
    address executor,
    bytes calldata executorData
  ) external payable returns (uint amountOut) {
    uint initialOutputBalance = tokenOut.universalBalanceOf(recipient);
    if (address(tokenIn) != NATIVE_ADDRESS) {
      if (amountIn > 0) tokenIn.safeTransferFrom(msg.sender, executor, amountIn);
      else tokenIn.safeTransfer(executor, tokenIn.balanceOf(address(this)) - 1); // -1 is slot undrain protection
    }
    safeExecutor.execute{value: msg.value}(executor, executorData);
    amountOut = tokenOut.universalBalanceOf(recipient) - initialOutputBalance;
    if (amountOut < amountOutMin)
      revert MinimalOutputBalanceViolation(address(tokenOut), amountOut);
  }
  // @notice Swaps multiple tokens
  // @notice 1. Transfers inputTokens to inputTokens[i].transferTo
  // @notice 2. launches executors
  // @notice 3. Checks that recipient's tokenOut balance was increased at least amountOutMin
  function snwapMultiple(
    InputToken[] calldata inputTokens,
    OutputToken[] calldata outputTokens,
    Executor[] calldata executors
  ) external payable returns (uint[] memory amountOut) {
    uint[] memory initialOutputBalance = new uint[](outputTokens.length);
    for (uint i = 0; i < outputTokens.length; i++) {
      initialOutputBalance[i] = outputTokens[i].token.universalBalanceOf(outputTokens[i].recipient);
    }
    for (uint i = 0; i < inputTokens.length; i++) {
      IERC20 tokenIn = inputTokens[i].token;
      if (address(tokenIn) != NATIVE_ADDRESS) {
        if (inputTokens[i].amountIn > 0) 
          tokenIn.safeTransferFrom(msg.sender, inputTokens[i].transferTo, inputTokens[i].amountIn);
        else tokenIn.safeTransfer(inputTokens[i].transferTo, tokenIn.balanceOf(address(this)) - 1); // -1 is slot undrain protection
      }
    }
    safeExecutor.executeMultiple{value: msg.value}(executors);
    amountOut = new uint[](outputTokens.length);
    for (uint i = 0; i < outputTokens.length; i++) {
      amountOut[i] = outputTokens[i].token.universalBalanceOf(outputTokens[i].recipient) - initialOutputBalance[i];
      if (amountOut[i] < outputTokens[i].amountOutMin)
        revert MinimalOutputBalanceViolation(address(outputTokens[i].token), amountOut[i]);
    }
  }
}
// This contract doesn't have token approves, so can safely call other contracts
contract SafeExecutor {  
  using Utils for address;
  function execute(address executor, bytes calldata executorData) external payable {
    executor.callRevertBubbleUp(msg.value, executorData);
  }
  function executeMultiple(Executor[] calldata executors) external payable {
    for (uint i = 0; i < executors.length; i++) {
      executors[i].executor.callRevertBubbleUp(executors[i].value, executors[i].data);
    }
  }
}
error MinimalOutputBalanceViolation(address tokenOut, uint256 amountOut);
address constant NATIVE_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
struct InputToken {
  IERC20 token;
  uint amountIn;
  address transferTo;
}
struct OutputToken {
  IERC20 token;
  address recipient;
  uint amountOutMin;
}
struct Executor {
  address executor;
  uint value;
  bytes data;
}
library Utils {
  using SafeERC20 for IERC20;
  
  function universalBalanceOf(IERC20 token, address user) internal view returns (uint256) {
    if (address(token) == NATIVE_ADDRESS) return address(user).balance;
    else return token.balanceOf(user);
  }
  function callRevertBubbleUp(address contr, uint256 value, bytes memory data) internal {
    (bool success, bytes memory returnBytes) = contr.call{value: value}(data);
    if (!success) {
      assembly {
        revert(add(32, returnBytes), mload(returnBytes))
      }
    }
  }
}

// hevm: flattened sources of /nix/store/8xb41r4qd0cjb63wcrxf1qmfg88p0961-dss-6fd7de0/src/dai.sol
pragma solidity =0.5.12;

////// /nix/store/8xb41r4qd0cjb63wcrxf1qmfg88p0961-dss-6fd7de0/src/lib.sol
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

/* pragma solidity 0.5.12; */

contract LibNote {
    event LogNote(
        bytes4   indexed  sig,
        address  indexed  usr,
        bytes32  indexed  arg1,
        bytes32  indexed  arg2,
        bytes             data
    ) anonymous;

    modifier note {
        _;
        assembly {
            // log an 'anonymous' event with a constant 6 words of calldata
            // and four indexed topics: selector, caller, arg1 and arg2
            let mark := msize                         // end of memory ensures zero
            mstore(0x40, add(mark, 288))              // update free memory pointer
            mstore(mark, 0x20)                        // bytes type data offset
            mstore(add(mark, 0x20), 224)              // bytes size (padded)
            calldatacopy(add(mark, 0x40), 0, 224)     // bytes payload
            log4(mark, 288,                           // calldata
                 shl(224, shr(224, calldataload(0))), // msg.sig
                 caller,                              // msg.sender
                 calldataload(4),                     // arg1
                 calldataload(36)                     // arg2
                )
        }
    }
}

////// /nix/store/8xb41r4qd0cjb63wcrxf1qmfg88p0961-dss-6fd7de0/src/dai.sol
// Copyright (C) 2017, 2018, 2019 dbrock, rain, mrchico

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU Affero General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU Affero General Public License for more details.
//
// You should have received a copy of the GNU Affero General Public License
// along with this program.  If not, see <https://www.gnu.org/licenses/>.

/* pragma solidity 0.5.12; */

/* import "./lib.sol"; */

contract Dai is LibNote {
    // --- Auth ---
    mapping (address => uint) public wards;
    function rely(address guy) external note auth { wards[guy] = 1; }
    function deny(address guy) external note auth { wards[guy] = 0; }
    modifier auth {
        require(wards[msg.sender] == 1, "Dai/not-authorized");
        _;
    }

    // --- ERC20 Data ---
    string  public constant name     = "Dai Stablecoin";
    string  public constant symbol   = "DAI";
    string  public constant version  = "1";
    uint8   public constant decimals = 18;
    uint256 public totalSupply;

    mapping (address => uint)                      public balanceOf;
    mapping (address => mapping (address => uint)) public allowance;
    mapping (address => uint)                      public nonces;

    event Approval(address indexed src, address indexed guy, uint wad);
    event Transfer(address indexed src, address indexed dst, uint wad);

    // --- Math ---
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x);
    }
    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x);
    }

    // --- EIP712 niceties ---
    bytes32 public DOMAIN_SEPARATOR;
    // bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address holder,address spender,uint256 nonce,uint256 expiry,bool allowed)");
    bytes32 public constant PERMIT_TYPEHASH = 0xea2aa0a1be11a07ed86d755c93467f4f82362b452371d1ba94d1715123511acb;

    constructor(uint256 chainId_) public {
        wards[msg.sender] = 1;
        DOMAIN_SEPARATOR = keccak256(abi.encode(
            keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
            keccak256(bytes(name)),
            keccak256(bytes(version)),
            chainId_,
            address(this)
        ));
    }

    // --- Token ---
    function transfer(address dst, uint wad) external returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }
    function transferFrom(address src, address dst, uint wad)
        public returns (bool)
    {
        require(balanceOf[src] >= wad, "Dai/insufficient-balance");
        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad, "Dai/insufficient-allowance");
            allowance[src][msg.sender] = sub(allowance[src][msg.sender], wad);
        }
        balanceOf[src] = sub(balanceOf[src], wad);
        balanceOf[dst] = add(balanceOf[dst], wad);
        emit Transfer(src, dst, wad);
        return true;
    }
    function mint(address usr, uint wad) external auth {
        balanceOf[usr] = add(balanceOf[usr], wad);
        totalSupply    = add(totalSupply, wad);
        emit Transfer(address(0), usr, wad);
    }
    function burn(address usr, uint wad) external {
        require(balanceOf[usr] >= wad, "Dai/insufficient-balance");
        if (usr != msg.sender && allowance[usr][msg.sender] != uint(-1)) {
            require(allowance[usr][msg.sender] >= wad, "Dai/insufficient-allowance");
            allowance[usr][msg.sender] = sub(allowance[usr][msg.sender], wad);
        }
        balanceOf[usr] = sub(balanceOf[usr], wad);
        totalSupply    = sub(totalSupply, wad);
        emit Transfer(usr, address(0), wad);
    }
    function approve(address usr, uint wad) external returns (bool) {
        allowance[msg.sender][usr] = wad;
        emit Approval(msg.sender, usr, wad);
        return true;
    }

    // --- Alias ---
    function push(address usr, uint wad) external {
        transferFrom(msg.sender, usr, wad);
    }
    function pull(address usr, uint wad) external {
        transferFrom(usr, msg.sender, wad);
    }
    function move(address src, address dst, uint wad) external {
        transferFrom(src, dst, wad);
    }

    // --- Approve by signature ---
    function permit(address holder, address spender, uint256 nonce, uint256 expiry,
                    bool allowed, uint8 v, bytes32 r, bytes32 s) external
    {
        bytes32 digest =
            keccak256(abi.encodePacked(
                "\x19\x01",
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH,
                                     holder,
                                     spender,
                                     nonce,
                                     expiry,
                                     allowed))
        ));

        require(holder != address(0), "Dai/invalid-address-0");
        require(holder == ecrecover(digest, v, r, s), "Dai/invalid-permit");
        require(expiry == 0 || now <= expiry, "Dai/permit-expired");
        require(nonce == nonces[holder]++, "Dai/invalid-nonce");
        uint wad = allowed ? uint(-1) : 0;
        allowance[holder][spender] = wad;
        emit Approval(holder, spender, wad);
    }
}

pragma solidity 0.4.24;

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * See https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address _who) public view returns (uint256);
  function transfer(address _to, uint256 _value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {

  /**
  * @dev Multiplies two numbers, throws on overflow.
  */
  function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
    // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (_a == 0) {
      return 0;
    }

    c = _a * _b;
    assert(c / _a == _b);
    return c;
  }

  /**
  * @dev Integer division of two numbers, truncating the quotient.
  */
  function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
    // assert(_b > 0); // Solidity automatically throws when dividing by 0
    // uint256 c = _a / _b;
    // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
    return _a / _b;
  }

  /**
  * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
    assert(_b <= _a);
    return _a - _b;
  }

  /**
  * @dev Adds two numbers, throws on overflow.
  */
  function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
    c = _a + _b;
    assert(c >= _a);
    return c;
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/BasicToken.sol

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) internal balances;

  uint256 internal totalSupply_;

  /**
  * @dev Total number of tokens in existence
  */
  function totalSupply() public view returns (uint256) {
    return totalSupply_;
  }

  /**
  * @dev Transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(_value <= balances[msg.sender]);
    require(_to != address(0));

    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    emit Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) public view returns (uint256) {
    return balances[_owner];
  }

}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address _owner, address _spender)
    public view returns (uint256);

  function transferFrom(address _from, address _to, uint256 _value)
    public returns (bool);

  function approve(address _spender, uint256 _value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

// File: openzeppelin-solidity/contracts/token/ERC20/StandardToken.sol

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/issues/20
 * Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    returns (bool)
  {
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);
    require(_to != address(0));

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    emit Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    emit Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(
    address _owner,
    address _spender
   )
    public
    view
    returns (uint256)
  {
    return allowed[_owner][_spender];
  }

  /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(
    address _spender,
    uint256 _addedValue
  )
    public
    returns (bool)
  {
    allowed[msg.sender][_spender] = (
      allowed[msg.sender][_spender].add(_addedValue));
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(
    address _spender,
    uint256 _subtractedValue
  )
    public
    returns (bool)
  {
    uint256 oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue >= oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}

// File: openzeppelin-solidity/contracts/token/ERC20/DetailedERC20.sol

/**
 * @title DetailedERC20 token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract DetailedERC20 is ERC20 {
  string public name;
  string public symbol;
  uint8 public decimals;

  constructor(string _name, string _symbol, uint8 _decimals) public {
    name = _name;
    symbol = _symbol;
    decimals = _decimals;
  }
}

// File: openzeppelin-solidity/contracts/ownership/Ownable.sol

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   * @notice Renouncing to ownership will leave the contract without an owner.
   * It will not be possible to call the functions with the `onlyOwner`
   * modifier anymore.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function transferOwnership(address _newOwner) public onlyOwner {
    _transferOwnership(_newOwner);
  }

  /**
   * @dev Transfers control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function _transferOwnership(address _newOwner) internal {
    require(_newOwner != address(0));
    emit OwnershipTransferred(owner, _newOwner);
    owner = _newOwner;
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/MintableToken.sol

/**
 * @title Mintable token
 * @dev Simple ERC20 Token example, with mintable token creation
 * Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
 */
contract MintableToken is StandardToken, Ownable {
  event Mint(address indexed to, uint256 amount);
  event MintFinished();

  bool public mintingFinished = false;


  modifier canMint() {
    require(!mintingFinished);
    _;
  }

  modifier hasMintPermission() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Function to mint tokens
   * @param _to The address that will receive the minted tokens.
   * @param _amount The amount of tokens to mint.
   * @return A boolean that indicates if the operation was successful.
   */
  function mint(
    address _to,
    uint256 _amount
  )
    public
    hasMintPermission
    canMint
    returns (bool)
  {
    totalSupply_ = totalSupply_.add(_amount);
    balances[_to] = balances[_to].add(_amount);
    emit Mint(_to, _amount);
    emit Transfer(address(0), _to, _amount);
    return true;
  }

  /**
   * @dev Function to stop minting new tokens.
   * @return True if the operation was successful.
   */
  function finishMinting() public onlyOwner canMint returns (bool) {
    mintingFinished = true;
    emit MintFinished();
    return true;
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/BurnableToken.sol

/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract BurnableToken is BasicToken {

  event Burn(address indexed burner, uint256 value);

  /**
   * @dev Burns a specific amount of tokens.
   * @param _value The amount of token to be burned.
   */
  function burn(uint256 _value) public {
    _burn(msg.sender, _value);
  }

  function _burn(address _who, uint256 _value) internal {
    require(_value <= balances[_who]);
    // no need to require value <= totalSupply, since that would imply the
    // sender's balance is greater than the totalSupply, which *should* be an assertion failure

    balances[_who] = balances[_who].sub(_value);
    totalSupply_ = totalSupply_.sub(_value);
    emit Burn(_who, _value);
    emit Transfer(_who, address(0), _value);
  }
}

// File: openzeppelin-solidity/contracts/lifecycle/Pausable.sol

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() public onlyOwner whenNotPaused {
    paused = true;
    emit Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() public onlyOwner whenPaused {
    paused = false;
    emit Unpause();
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/PausableToken.sol

/**
 * @title Pausable token
 * @dev StandardToken modified with pausable transfers.
 **/
contract PausableToken is StandardToken, Pausable {

  function transfer(
    address _to,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.transfer(_to, _value);
  }

  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.transferFrom(_from, _to, _value);
  }

  function approve(
    address _spender,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.approve(_spender, _value);
  }

  function increaseApproval(
    address _spender,
    uint _addedValue
  )
    public
    whenNotPaused
    returns (bool success)
  {
    return super.increaseApproval(_spender, _addedValue);
  }

  function decreaseApproval(
    address _spender,
    uint _subtractedValue
  )
    public
    whenNotPaused
    returns (bool success)
  {
    return super.decreaseApproval(_spender, _subtractedValue);
  }
}

// File: openzeppelin-solidity/contracts/ownership/Claimable.sol

/**
 * @title Claimable
 * @dev Extension for the Ownable contract, where the ownership needs to be claimed.
 * This allows the new owner to accept the transfer.
 */
contract Claimable is Ownable {
  address public pendingOwner;

  /**
   * @dev Modifier throws if called by any account other than the pendingOwner.
   */
  modifier onlyPendingOwner() {
    require(msg.sender == pendingOwner);
    _;
  }

  /**
   * @dev Allows the current owner to set the pendingOwner address.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    pendingOwner = newOwner;
  }

  /**
   * @dev Allows the pendingOwner address to finalize the transfer.
   */
  function claimOwnership() public onlyPendingOwner {
    emit OwnershipTransferred(owner, pendingOwner);
    owner = pendingOwner;
    pendingOwner = address(0);
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  function safeTransfer(
    ERC20Basic _token,
    address _to,
    uint256 _value
  )
    internal
  {
    require(_token.transfer(_to, _value));
  }

  function safeTransferFrom(
    ERC20 _token,
    address _from,
    address _to,
    uint256 _value
  )
    internal
  {
    require(_token.transferFrom(_from, _to, _value));
  }

  function safeApprove(
    ERC20 _token,
    address _spender,
    uint256 _value
  )
    internal
  {
    require(_token.approve(_spender, _value));
  }
}

// File: openzeppelin-solidity/contracts/ownership/CanReclaimToken.sol

/**
 * @title Contracts that should be able to recover tokens
 * @author SylTi
 * @dev This allow a contract to recover any ERC20 token received in a contract by transferring the balance to the contract owner.
 * This will prevent any accidental loss of tokens.
 */
contract CanReclaimToken is Ownable {
  using SafeERC20 for ERC20Basic;

  /**
   * @dev Reclaim all ERC20Basic compatible tokens
   * @param _token ERC20Basic The address of the token contract
   */
  function reclaimToken(ERC20Basic _token) external onlyOwner {
    uint256 balance = _token.balanceOf(this);
    _token.safeTransfer(owner, balance);
  }

}

// File: contracts/utils/OwnableContract.sol

// empty block is used as this contract just inherits others.
contract OwnableContract is CanReclaimToken, Claimable { } /* solhint-disable-line no-empty-blocks */

// File: contracts/token/WBTC.sol

contract WBTC is StandardToken, DetailedERC20("Wrapped BTC", "WBTC", 8),
    MintableToken, BurnableToken, PausableToken, OwnableContract {

    function burn(uint value) public onlyOwner {
        super.burn(value);
    }

    function finishMinting() public onlyOwner returns (bool) {
        return false;
    }

    function renounceOwnership() public onlyOwner {
        revert("renouncing ownership is blocked");
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.0;
import "/interfaces/IRouteProcessor.sol";
import "interfaces/IERC20.sol";
import "./Auth.sol";
/// @title TokenChomper for selling accumulated tokens for weth or other base assets
/// @notice This contract will be used for fee collection and breakdown
/// @dev Uses Auth contract for 2-step owner process and trust operators to guard functions
contract TokenChomper is Auth {
  address public immutable weth;
  IRouteProcessor public routeProcessor;
  bytes4 private constant TRANSFER_SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));
  error TransferFailed();
  constructor(
    address _operator,
    address _routeProcessor,
    address _weth
  ) Auth(_operator) {
    // initial owner is msg.sender
    routeProcessor = IRouteProcessor(_routeProcessor);
    weth = _weth;
  }
  /// @notice Updates the route processor to be used for swapping tokens
  /// @dev make sure new route processor is backwards compatiable (should be)
  /// @param _routeProcessor The address of the new route processor
  function updateRouteProcessor(address _routeProcessor) external onlyOwner {
    routeProcessor = IRouteProcessor(_routeProcessor);
  }
  
  /// @notice Processes a route selling any of the tokens in TokenChomper for an output token
  /// @dev can be called by operators
  /// @param tokenIn The address of the token to be sold
  /// @param amountIn The amount of the token to be sold
  /// @param tokenOut The address of the token to be bought
  /// @param amoutOutMin The minimum amount of the token to be bought (slippage protection)
  /// @param route The route to be used for swapping
  function processRoute(
    address tokenIn,
    uint256 amountIn,
    address tokenOut,
    uint256 amoutOutMin,
    bytes memory route
  ) external onlyTrusted {
    // process route to any output token, slippage will be handled by the route processor
    IERC20(tokenIn).transfer(address(routeProcessor), amountIn);
    routeProcessor.processRoute(
      tokenIn, amountIn, tokenOut, amoutOutMin, address(this), route
    ); 
  }
  /// @notice Withdraw any token or eth from the contract
  /// @dev can only be called by owner
  /// @param token The address of the token to be withdrawn, 0x0 for eth
  /// @param to The address to send the token to
  /// @param _value The amount of the token to be withdrawn
  function withdraw(address token, address to, uint256 _value) onlyOwner external {
    if (token != address(0)) {
      _safeTransfer(token, to, _value);
    } 
    else {
      (bool success, ) = to.call{value: _value}("");
      require(success);
    }
  }
  
  function _safeTransfer(address token, address to, uint value) internal {
    (bool success, bytes memory data) = token.call(abi.encodeWithSelector(TRANSFER_SELECTOR, to, value));
    if (!success || (data.length != 0 && !abi.decode(data, (bool)))) revert TransferFailed();
  }
  /// @notice In case we receive any unwrapped eth (native token) we can call this
  /// @dev operators can call this 
  function wrapEth() onlyTrusted external {
    weth.call{value: address(this).balance}("");
  }
  /// @notice Available function in case we need to do any calls that aren't supported by the contract (unwinding lp positions, etc.)
  /// @dev can only be called by owner
  /// @param to The address to send the call to
  /// @param _value The amount of eth to send with the call
  /// @param data The data to be sent with the call
  function doAction(address to, uint256 _value, bytes memory data) onlyOwner external {
    (bool success, ) = to.call{value: _value}(data);
    require(success);
  }
  receive() external payable {}
}// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >= 0.8.0;
interface IRouteProcessor {
  
  struct RouteProcessorData {
        address tokenIn;
        uint256 amountIn;
        address tokenOut;
        uint256 amountOutMin;
        address to;
        bytes route;
  }
  
  function processRoute(
    address tokenIn,
    uint256 amountIn,
    address tokenOut,
    uint256 amountOutMin,
    address to,
    bytes memory route
  ) external payable returns (uint256 amountOut);
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)
pragma solidity >= 0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.8.0;
import "openzeppelin/access/Ownable2Step.sol";
abstract contract Auth is Ownable2Step {
    event SetTrusted(address indexed user, bool isTrusted);
    mapping(address => bool) public trusted;
    error OnlyTrusted();
    modifier onlyTrusted() {
        if (!trusted[msg.sender]) revert OnlyTrusted();
        _;
    }
    constructor(address trustedUser) {
        trusted[trustedUser] = true;
        emit SetTrusted(trustedUser, true);
    }
    function setTrusted(address user, bool isTrusted) external onlyOwner {
        trusted[user] = isTrusted;
        emit SetTrusted(user, isTrusted);
    }
}// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (access/Ownable2Step.sol)
pragma solidity ^0.8.0;
import "./Ownable.sol";
/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;
    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }
    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }
    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() external {
        address sender = _msgSender();
        require(pendingOwner() == sender, "Ownable2Step: caller is not the new owner");
        _transferOwnership(sender);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}