/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "./migrations/LibBootstrap.sol";
import "./features/Bootstrap.sol";
import "./storage/LibProxyStorage.sol";
import "./errors/LibProxyRichErrors.sol";
/// @dev An extensible proxy contract that serves as a universal entry point for
///      interacting with the 0x protocol.
contract ZeroEx {
    // solhint-disable separate-by-one-line-in-contract,indent,var-name-mixedcase
    using LibBytesV06 for bytes;
    /// @dev Construct this contract and register the `Bootstrap` feature.
    ///      After constructing this contract, `bootstrap()` should be called
    ///      to seed the initial feature set.
    constructor() public {
        // Temporarily create and register the bootstrap feature.
        // It will deregister itself after `bootstrap()` has been called.
        Bootstrap bootstrap = new Bootstrap(msg.sender);
        LibProxyStorage.getStorage().impls[bootstrap.bootstrap.selector] =
            address(bootstrap);
    }
    // solhint-disable state-visibility
    /// @dev Forwards calls to the appropriate implementation contract.
    fallback() external payable {
        bytes4 selector = msg.data.readBytes4(0);
        address impl = getFunctionImplementation(selector);
        if (impl == address(0)) {
            _revertWithData(LibProxyRichErrors.NotImplementedError(selector));
        }
        (bool success, bytes memory resultData) = impl.delegatecall(msg.data);
        if (!success) {
            _revertWithData(resultData);
        }
        _returnWithData(resultData);
    }
    /// @dev Fallback for just receiving ether.
    receive() external payable {}
    // solhint-enable state-visibility
    /// @dev Get the implementation contract of a registered function.
    /// @param selector The function selector.
    /// @return impl The implementation contract address.
    function getFunctionImplementation(bytes4 selector)
        public
        view
        returns (address impl)
    {
        return LibProxyStorage.getStorage().impls[selector];
    }
    /// @dev Revert with arbitrary bytes.
    /// @param data Revert data.
    function _revertWithData(bytes memory data) private pure {
        assembly { revert(add(data, 32), mload(data)) }
    }
    /// @dev Return with arbitrary bytes.
    /// @param data Return data.
    function _returnWithData(bytes memory data) private pure {
        assembly { return(add(data, 32), mload(data)) }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibBytesRichErrorsV06.sol";
import "./errors/LibRichErrorsV06.sol";
library LibBytesV06 {
    using LibBytesV06 for bytes;
    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }
    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }
            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)
                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)
                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }
    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    /// @dev Returns a slice from a byte array without preserving the input.
    ///      When `from == 0`, the original array will match the slice.
    ///      In other cases its state will be corrupted.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }
    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return result The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        if (b.length == 0) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanZeroRequired,
                b.length,
                0
            ));
        }
        // Store last byte.
        result = b[b.length - 1];
        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }
    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return equal True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }
    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return result address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }
    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)
            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }
    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return result bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }
    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }
    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return result uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }
    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }
    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return result bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        if (b.length < index + 4) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsFourRequired,
                b.length,
                index + 4
            ));
        }
        // Arrays are prefixed by a 32 byte length field
        index += 32;
        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }
    /// @dev Writes a new length to a byte array.
    ///      Decreasing length will lead to removing the corresponding lower order bytes from the byte array.
    ///      Increasing length may lead to appending adjacent in-memory bytes to the end of the byte array.
    /// @param b Bytes array to write new length to.
    /// @param length New length of byte array.
    function writeLength(bytes memory b, uint256 length)
        internal
        pure
    {
        assembly {
            mstore(b, length)
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibBytesRichErrorsV06 {
    enum InvalidByteOperationErrorCodes {
        FromLessThanOrEqualsToRequired,
        ToLessThanOrEqualsLengthRequired,
        LengthGreaterThanZeroRequired,
        LengthGreaterThanOrEqualsFourRequired,
        LengthGreaterThanOrEqualsTwentyRequired,
        LengthGreaterThanOrEqualsThirtyTwoRequired,
        LengthGreaterThanOrEqualsNestedBytesLengthRequired,
        DestinationLengthGreaterThanOrEqualSourceLengthRequired
    }
    // bytes4(keccak256("InvalidByteOperationError(uint8,uint256,uint256)"))
    bytes4 internal constant INVALID_BYTE_OPERATION_ERROR_SELECTOR =
        0x28006595;
    // solhint-disable func-name-mixedcase
    function InvalidByteOperationError(
        InvalidByteOperationErrorCodes errorCode,
        uint256 offset,
        uint256 required
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INVALID_BYTE_OPERATION_ERROR_SELECTOR,
            errorCode,
            offset,
            required
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibRichErrorsV06 {
    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;
    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase
    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibProxyRichErrors.sol";
library LibBootstrap {
    /// @dev Magic bytes returned by the bootstrapper to indicate success.
    ///      This is `keccack('BOOTSTRAP_SUCCESS')`.
    bytes4 internal constant BOOTSTRAP_SUCCESS = 0xd150751b;
    using LibRichErrorsV06 for bytes;
    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallBootstrapFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != BOOTSTRAP_SUCCESS)
        {
            LibProxyRichErrors.BootstrapCallFailedError(target, resultData).rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibProxyRichErrors {
    // solhint-disable func-name-mixedcase
    function NotImplementedError(bytes4 selector)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotImplementedError(bytes4)")),
            selector
        );
    }
    function InvalidBootstrapCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidBootstrapCallerError(address,address)")),
            actual,
            expected
        );
    }
    function InvalidDieCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidDieCallerError(address,address)")),
            actual,
            expected
        );
    }
    function BootstrapCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("BootstrapCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../migrations/LibBootstrap.sol";
import "../storage/LibProxyStorage.sol";
import "./IBootstrap.sol";
/// @dev Detachable `bootstrap()` feature.
contract Bootstrap is
    IBootstrap
{
    // solhint-disable state-visibility,indent
    /// @dev The ZeroEx contract.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _deployer;
    /// @dev The implementation address of this contract.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _implementation;
    /// @dev The deployer.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _bootstrapCaller;
    // solhint-enable state-visibility,indent
    using LibRichErrorsV06 for bytes;
    /// @dev Construct this contract and set the bootstrap migration contract.
    ///      After constructing this contract, `bootstrap()` should be called
    ///      to seed the initial feature set.
    /// @param bootstrapCaller The allowed caller of `bootstrap()`.
    constructor(address bootstrapCaller) public {
        _deployer = msg.sender;
        _implementation = address(this);
        _bootstrapCaller = bootstrapCaller;
    }
    /// @dev Bootstrap the initial feature set of this contract by delegatecalling
    ///      into `target`. Before exiting the `bootstrap()` function will
    ///      deregister itself from the proxy to prevent being called again.
    /// @param target The bootstrapper contract address.
    /// @param callData The call data to execute on `target`.
    function bootstrap(address target, bytes calldata callData) external override {
        // Only the bootstrap caller can call this function.
        if (msg.sender != _bootstrapCaller) {
            LibProxyRichErrors.InvalidBootstrapCallerError(
                msg.sender,
                _bootstrapCaller
            ).rrevert();
        }
        // Deregister.
        LibProxyStorage.getStorage().impls[this.bootstrap.selector] = address(0);
        // Self-destruct.
        Bootstrap(_implementation).die();
        // Call the bootstrapper.
        LibBootstrap.delegatecallBootstrapFunction(target, callData);
    }
    /// @dev Self-destructs this contract.
    ///      Can only be called by the deployer.
    function die() external {
        if (msg.sender != _deployer) {
            LibProxyRichErrors.InvalidDieCallerError(msg.sender, _deployer).rrevert();
        }
        selfdestruct(msg.sender);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for the proxy contract.
library LibProxyStorage {
    /// @dev Storage bucket for proxy contract.
    struct Storage {
        // Mapping of function selector -> function implementation
        mapping(bytes4 => address) impls;
        // The owner of the proxy contract.
        address owner;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.Proxy
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Common storage helpers
library LibStorage {
    /// @dev What to bit-shift a storage ID by to get its slot.
    ///      This gives us a maximum of 2**128 inline fields in each bucket.
    uint256 private constant STORAGE_SLOT_EXP = 128;
    /// @dev Storage IDs for feature storage buckets.
    ///      WARNING: APPEND-ONLY.
    enum StorageId {
        Proxy,
        SimpleFunctionRegistry,
        Ownable,
        TokenSpender,
        TransformERC20
    }
    /// @dev Get the storage slot given a storage ID. We assign unique, well-spaced
    ///     slots to storage bucket variables to ensure they do not overlap.
    ///     See: https://solidity.readthedocs.io/en/v0.6.6/assembly.html#access-to-external-variables-functions-and-libraries
    /// @param storageId An entry in `StorageId`
    /// @return slot The storage slot.
    function getStorageSlot(StorageId storageId)
        internal
        pure
        returns (uint256 slot)
    {
        // This should never overflow with a reasonable `STORAGE_SLOT_EXP`
        // because Solidity will do a range check on `storageId` during the cast.
        return (uint256(storageId) + 1) << STORAGE_SLOT_EXP;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Detachable `bootstrap()` feature.
interface IBootstrap {
    /// @dev Bootstrap the initial feature set of this contract by delegatecalling
    ///      into `target`. Before exiting the `bootstrap()` function will
    ///      deregister itself from the proxy to prevent being called again.
    /// @param target The bootstrapper contract address.
    /// @param callData The call data to execute on `target`.
    function bootstrap(address target, bytes calldata callData) external;
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibCommonRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyCallableBySelfError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableBySelfError(address)")),
            sender
        );
    }
    function IllegalReentrancyError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IllegalReentrancyError()"))
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibOwnableRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyOwnerError(address,address)")),
            sender,
            owner
        );
    }
    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransferOwnerToZeroError()"))
        );
    }
    function MigrateCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("MigrateCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSimpleFunctionRegistryRichErrors {
    // solhint-disable func-name-mixedcase
    function NotInRollbackHistoryError(bytes4 selector, address targetImpl)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotInRollbackHistoryError(bytes4,address)")),
            selector,
            targetImpl
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSpenderRichErrors {
    // solhint-disable func-name-mixedcase
    function SpenderERC20TransferFromFailedError(
        address token,
        address owner,
        address to,
        uint256 amount,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("SpenderERC20TransferFromFailedError(address,address,address,uint256,bytes)")),
            token,
            owner,
            to,
            amount,
            errorData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibTransformERC20RichErrors {
    // solhint-disable func-name-mixedcase,separate-by-one-line-in-contract
    function InsufficientEthAttachedError(
        uint256 ethAttached,
        uint256 ethNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientEthAttachedError(uint256,uint256)")),
            ethAttached,
            ethNeeded
        );
    }
    function IncompleteTransformERC20Error(
        address outputToken,
        uint256 outputTokenAmount,
        uint256 minOutputTokenAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteTransformERC20Error(address,uint256,uint256)")),
            outputToken,
            outputTokenAmount,
            minOutputTokenAmount
        );
    }
    function NegativeTransformERC20OutputError(
        address outputToken,
        uint256 outputTokenLostAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NegativeTransformERC20OutputError(address,uint256)")),
            outputToken,
            outputTokenLostAmount
        );
    }
    function TransformerFailedError(
        address transformer,
        bytes memory transformerData,
        bytes memory resultData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransformerFailedError(address,bytes,bytes)")),
            transformer,
            transformerData,
            resultData
        );
    }
    // Common Transformer errors ///////////////////////////////////////////////
    function OnlyCallableByDeployerError(
        address caller,
        address deployer
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableByDeployerError(address,address)")),
            caller,
            deployer
        );
    }
    function InvalidExecutionContextError(
        address actualContext,
        address expectedContext
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidExecutionContextError(address,address)")),
            actualContext,
            expectedContext
        );
    }
    enum InvalidTransformDataErrorCode {
        INVALID_TOKENS,
        INVALID_ARRAY_LENGTH
    }
    function InvalidTransformDataError(
        InvalidTransformDataErrorCode errorCode,
        bytes memory transformData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidTransformDataError(uint8,bytes)")),
            errorCode,
            transformData
        );
    }
    // FillQuoteTransformer errors /////////////////////////////////////////////
    function IncompleteFillSellQuoteError(
        address sellToken,
        uint256 soldAmount,
        uint256 sellAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteFillSellQuoteError(address,uint256,uint256)")),
            sellToken,
            soldAmount,
            sellAmount
        );
    }
    function IncompleteFillBuyQuoteError(
        address buyToken,
        uint256 boughtAmount,
        uint256 buyAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteFillBuyQuoteError(address,uint256,uint256)")),
            buyToken,
            boughtAmount,
            buyAmount
        );
    }
    function InsufficientTakerTokenError(
        uint256 tokenBalance,
        uint256 tokensNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientTakerTokenError(uint256,uint256)")),
            tokenBalance,
            tokensNeeded
        );
    }
    function InsufficientProtocolFeeError(
        uint256 ethBalance,
        uint256 ethNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientProtocolFeeError(uint256,uint256)")),
            ethBalance,
            ethNeeded
        );
    }
    function InvalidERC20AssetDataError(
        bytes memory assetData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidERC20AssetDataError(bytes)")),
            assetData
        );
    }
    function InvalidTakerFeeTokenError(
        address token
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidTakerFeeTokenError(address)")),
            token
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibWalletRichErrors {
    // solhint-disable func-name-mixedcase
    function WalletExecuteCallFailedError(
        address wallet,
        address callTarget,
        bytes memory callData,
        uint256 callValue,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("WalletExecuteCallFailedError(address,address,bytes,uint256,bytes)")),
            wallet,
            callTarget,
            callData,
            callValue,
            errorData
        );
    }
    function WalletExecuteDelegateCallFailedError(
        address wallet,
        address callTarget,
        bytes memory callData,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("WalletExecuteDelegateCallFailedError(address,address,bytes,bytes)")),
            wallet,
            callTarget,
            callData,
            errorData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/AuthorizableV06.sol";
import "../errors/LibSpenderRichErrors.sol";
import "./IAllowanceTarget.sol";
/// @dev The allowance target for the TokenSpender feature.
contract AllowanceTarget is
    IAllowanceTarget,
    AuthorizableV06
{
    // solhint-disable no-unused-vars,indent,no-empty-blocks
    using LibRichErrorsV06 for bytes;
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        override
        onlyAuthorized
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.call(callData);
        if (!success) {
            resultData.rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./interfaces/IAuthorizableV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibAuthorizableRichErrorsV06.sol";
import "./OwnableV06.sol";
// solhint-disable no-empty-blocks
contract AuthorizableV06 is
    OwnableV06,
    IAuthorizableV06
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        _assertSenderIsAuthorized();
        _;
    }
    // @dev Whether an address is authorized to call privileged functions.
    // @param 0 Address to query.
    // @return 0 Whether the address is authorized.
    mapping (address => bool) public override authorized;
    // @dev Whether an address is authorized to call privileged functions.
    // @param 0 Index of authorized address.
    // @return 0 Authorized address.
    address[] public override authorities;
    /// @dev Initializes the `owner` address.
    constructor()
        public
        OwnableV06()
    {}
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        override
        onlyOwner
    {
        _addAuthorizedAddress(target);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        override
        onlyOwner
    {
        if (!authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetNotAuthorizedError(target));
        }
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                _removeAuthorizedAddressAtIndex(target, i);
                break;
            }
        }
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        override
        onlyOwner
    {
        _removeAuthorizedAddressAtIndex(target, index);
    }
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        override
        view
        returns (address[] memory)
    {
        return authorities;
    }
    /// @dev Reverts if msg.sender is not authorized.
    function _assertSenderIsAuthorized()
        internal
        view
    {
        if (!authorized[msg.sender]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.SenderNotAuthorizedError(msg.sender));
        }
    }
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function _addAuthorizedAddress(address target)
        internal
    {
        // Ensure that the target is not the zero address.
        if (target == address(0)) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.ZeroCantBeAuthorizedError());
        }
        // Ensure that the target is not already authorized.
        if (authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetAlreadyAuthorizedError(target));
        }
        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function _removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        internal
    {
        if (!authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetNotAuthorizedError(target));
        }
        if (index >= authorities.length) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.IndexOutOfBoundsError(
                index,
                authorities.length
            ));
        }
        if (authorities[index] != target) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.AuthorizedAddressMismatchError(
                authorities[index],
                target
            ));
        }
        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.pop();
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IOwnableV06.sol";
interface IAuthorizableV06 is
    IOwnableV06
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );
    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    /// @dev Gets all authorized addresses.
    /// @return authorizedAddresses Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory authorizedAddresses);
    /// @dev Whether an adderss is authorized to call privileged functions.
    /// @param addr Address to query.
    /// @return isAuthorized Whether the address is authorized.
    function authorized(address addr) external view returns (bool isAuthorized);
    /// @dev All addresseses authorized to call privileged functions.
    /// @param idx Index of authorized address.
    /// @return addr Authorized address.
    function authorities(uint256 idx) external view returns (address addr);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IOwnableV06 {
    /// @dev Emitted by Ownable when ownership is transferred.
    /// @param previousOwner The previous owner of the contract.
    /// @param newOwner The new owner of the contract.
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /// @dev Transfers ownership of the contract to a new address.
    /// @param newOwner The address that will become the owner.
    function transferOwnership(address newOwner) external;
    /// @dev The owner of this contract.
    /// @return ownerAddress The owner address.
    function owner() external view returns (address ownerAddress);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibAuthorizableRichErrorsV06 {
    // bytes4(keccak256("AuthorizedAddressMismatchError(address,address)"))
    bytes4 internal constant AUTHORIZED_ADDRESS_MISMATCH_ERROR_SELECTOR =
        0x140a84db;
    // bytes4(keccak256("IndexOutOfBoundsError(uint256,uint256)"))
    bytes4 internal constant INDEX_OUT_OF_BOUNDS_ERROR_SELECTOR =
        0xe9f83771;
    // bytes4(keccak256("SenderNotAuthorizedError(address)"))
    bytes4 internal constant SENDER_NOT_AUTHORIZED_ERROR_SELECTOR =
        0xb65a25b9;
    // bytes4(keccak256("TargetAlreadyAuthorizedError(address)"))
    bytes4 internal constant TARGET_ALREADY_AUTHORIZED_ERROR_SELECTOR =
        0xde16f1a0;
    // bytes4(keccak256("TargetNotAuthorizedError(address)"))
    bytes4 internal constant TARGET_NOT_AUTHORIZED_ERROR_SELECTOR =
        0xeb5108a2;
    // bytes4(keccak256("ZeroCantBeAuthorizedError()"))
    bytes internal constant ZERO_CANT_BE_AUTHORIZED_ERROR_BYTES =
        hex"57654fe4";
    // solhint-disable func-name-mixedcase
    function AuthorizedAddressMismatchError(
        address authorized,
        address target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            AUTHORIZED_ADDRESS_MISMATCH_ERROR_SELECTOR,
            authorized,
            target
        );
    }
    function IndexOutOfBoundsError(
        uint256 index,
        uint256 length
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INDEX_OUT_OF_BOUNDS_ERROR_SELECTOR,
            index,
            length
        );
    }
    function SenderNotAuthorizedError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            SENDER_NOT_AUTHORIZED_ERROR_SELECTOR,
            sender
        );
    }
    function TargetAlreadyAuthorizedError(address target)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            TARGET_ALREADY_AUTHORIZED_ERROR_SELECTOR,
            target
        );
    }
    function TargetNotAuthorizedError(address target)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            TARGET_NOT_AUTHORIZED_ERROR_SELECTOR,
            target
        );
    }
    function ZeroCantBeAuthorizedError()
        internal
        pure
        returns (bytes memory)
    {
        return ZERO_CANT_BE_AUTHORIZED_ERROR_BYTES;
    }
}
/*
  Copyright 2019 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./interfaces/IOwnableV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibOwnableRichErrorsV06.sol";
contract OwnableV06 is
    IOwnableV06
{
    /// @dev The owner of this contract.
    /// @return 0 The owner address.
    address public override owner;
    constructor() public {
        owner = msg.sender;
    }
    modifier onlyOwner() {
        _assertSenderIsOwner();
        _;
    }
    /// @dev Change the owner of this contract.
    /// @param newOwner New owner address.
    function transferOwnership(address newOwner)
        public
        override
        onlyOwner
    {
        if (newOwner == address(0)) {
            LibRichErrorsV06.rrevert(LibOwnableRichErrorsV06.TransferOwnerToZeroError());
        } else {
            owner = newOwner;
            emit OwnershipTransferred(msg.sender, newOwner);
        }
    }
    function _assertSenderIsOwner()
        internal
        view
    {
        if (msg.sender != owner) {
            LibRichErrorsV06.rrevert(LibOwnableRichErrorsV06.OnlyOwnerError(
                msg.sender,
                owner
            ));
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibOwnableRichErrorsV06 {
    // bytes4(keccak256("OnlyOwnerError(address,address)"))
    bytes4 internal constant ONLY_OWNER_ERROR_SELECTOR =
        0x1de45ad1;
    // bytes4(keccak256("TransferOwnerToZeroError()"))
    bytes internal constant TRANSFER_OWNER_TO_ZERO_ERROR_BYTES =
        hex"e69edc3e";
    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ONLY_OWNER_ERROR_SELECTOR,
            sender,
            owner
        );
    }
    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return TRANSFER_OWNER_TO_ZERO_ERROR_BYTES;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IAuthorizableV06.sol";
/// @dev The allowance target for the TokenSpender feature.
interface IAllowanceTarget is
    IAuthorizableV06
{
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        returns (bytes memory resultData);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibOwnableRichErrorsV06.sol";
import "../errors/LibWalletRichErrors.sol";
import "./IFlashWallet.sol";
/// @dev A contract that can execute arbitrary calls from its owner.
contract FlashWallet is
    IFlashWallet
{
    // solhint-disable no-unused-vars,indent,no-empty-blocks
    using LibRichErrorsV06 for bytes;
    // solhint-disable
    /// @dev Store the owner/deployer as an immutable to make this contract stateless.
    address public override immutable owner;
    // solhint-enable
    constructor() public {
        // The deployer is the owner.
        owner = msg.sender;
    }
    /// @dev Allows only the (immutable) owner to call a function.
    modifier onlyOwner() virtual {
        if (msg.sender != owner) {
            LibOwnableRichErrorsV06.OnlyOwnerError(
                msg.sender,
                owner
            ).rrevert();
        }
        _;
    }
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @param value Ether to attach to the call.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData,
        uint256 value
    )
        external
        payable
        override
        onlyOwner
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.call{value: value}(callData);
        if (!success) {
            LibWalletRichErrors
                .WalletExecuteCallFailedError(
                    address(this),
                    target,
                    callData,
                    value,
                    resultData
                )
                .rrevert();
        }
    }
    /// @dev Execute an arbitrary delegatecall, in the context of this puppet.
    ///      Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeDelegateCall(
        address payable target,
        bytes calldata callData
    )
        external
        payable
        override
        onlyOwner
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.delegatecall(callData);
        if (!success) {
            LibWalletRichErrors
                .WalletExecuteDelegateCallFailedError(
                    address(this),
                    target,
                    callData,
                    resultData
                )
                .rrevert();
        }
    }
    // solhint-disable
    /// @dev Allows this contract to receive ether.
    receive() external override payable {}
    // solhint-enable
    /// @dev Signal support for receiving ERC1155 tokens.
    /// @param interfaceID The interface ID, as per ERC-165 rules.
    /// @return hasSupport `true` if this contract supports an ERC-165 interface.
    function supportsInterface(bytes4 interfaceID)
        external
        pure
        returns (bool hasSupport)
    {
        return  interfaceID == this.supportsInterface.selector ||
                interfaceID == this.onERC1155Received.selector ^ this.onERC1155BatchReceived.selector ||
                interfaceID == this.tokenFallback.selector;
    }
    ///  @dev Allow this contract to receive ERC1155 tokens.
    ///  @return success  `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
    function onERC1155Received(
        address, // operator,
        address, // from,
        uint256, // id,
        uint256, // value,
        bytes calldata //data
    )
        external
        pure
        returns (bytes4 success)
    {
        return this.onERC1155Received.selector;
    }
    ///  @dev Allow this contract to receive ERC1155 tokens.
    ///  @return success  `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
    function onERC1155BatchReceived(
        address, // operator,
        address, // from,
        uint256[] calldata, // ids,
        uint256[] calldata, // values,
        bytes calldata // data
    )
        external
        pure
        returns (bytes4 success)
    {
        return this.onERC1155BatchReceived.selector;
    }
    /// @dev Allows this contract to receive ERC223 tokens.
    function tokenFallback(
        address, // from,
        uint256, // value,
        bytes calldata // value
    )
        external
        pure
    {}
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";
/// @dev A contract that can execute arbitrary calls from its owner.
interface IFlashWallet {
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @param value Ether to attach to the call.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData,
        uint256 value
    )
        external
        payable
        returns (bytes memory resultData);
    /// @dev Execute an arbitrary delegatecall, in the context of this puppet.
    ///      Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeDelegateCall(
        address payable target,
        bytes calldata callData
    )
        external
        payable
        returns (bytes memory resultData);
    /// @dev Allows the puppet to receive ETH.
    receive() external payable;
    /// @dev Fetch the immutable owner/deployer of this contract.
    /// @return owner_ The immutable owner/deployer/
    function owner() external view returns (address owner_);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/AuthorizableV06.sol";
/// @dev A contract with a `die()` function.
interface IKillable {
    function die() external;
}
/// @dev Deployer contract for ERC20 transformers.
///      Only authorities may call `deploy()` and `kill()`.
contract TransformerDeployer is
    AuthorizableV06
{
    /// @dev Emitted when a contract is deployed via `deploy()`.
    /// @param deployedAddress The address of the deployed contract.
    /// @param nonce The deployment nonce.
    /// @param sender The caller of `deploy()`.
    event Deployed(address deployedAddress, uint256 nonce, address sender);
    /// @dev Emitted when a contract is killed via `kill()`.
    /// @param target The address of the contract being killed..
    /// @param sender The caller of `kill()`.
    event Killed(address target, address sender);
    // @dev The current nonce of this contract.
    uint256 public nonce = 1;
    // @dev Mapping of deployed contract address to deployment nonce.
    mapping (address => uint256) public toDeploymentNonce;
    /// @dev Create this contract and register authorities.
    constructor(address[] memory authorities) public {
        for (uint256 i = 0; i < authorities.length; ++i) {
            _addAuthorizedAddress(authorities[i]);
        }
    }
    /// @dev Deploy a new contract. Only callable by an authority.
    ///      Any attached ETH will also be forwarded.
    function deploy(bytes memory bytecode)
        public
        payable
        onlyAuthorized
        returns (address deployedAddress)
    {
        uint256 deploymentNonce = nonce;
        nonce += 1;
        assembly {
            deployedAddress := create(callvalue(), add(bytecode, 32), mload(bytecode))
        }
        toDeploymentNonce[deployedAddress] = deploymentNonce;
        emit Deployed(deployedAddress, deploymentNonce, msg.sender);
    }
    /// @dev Call `die()` on a contract. Only callable by an authority.
    function kill(IKillable target)
        public
        onlyAuthorized
    {
        target.die();
        emit Killed(address(target), msg.sender);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic interface for a feature contract.
interface IFeature {
    // solhint-disable func-name-mixedcase
    /// @dev The name of this feature set.
    function FEATURE_NAME() external view returns (string memory name);
    /// @dev The version of this feature set.
    function FEATURE_VERSION() external view returns (uint256 version);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";
// solhint-disable no-empty-blocks
/// @dev Owner management and migration features.
interface IOwnable is
    IOwnableV06
{
    /// @dev Emitted when `migrate()` is called.
    /// @param caller The caller of `migrate()`.
    /// @param migrator The migration contract.
    /// @param newOwner The address of the new owner.
    event Migrated(address caller, address migrator, address newOwner);
    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      The owner will be temporarily set to `address(this)` inside the call.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param newOwner The address of the new owner.
    /// @param data The call data.
    function migrate(address target, bytes calldata data, address newOwner) external;
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic registry management features.
interface ISimpleFunctionRegistry {
    /// @dev A function implementation was updated via `extend()` or `rollback()`.
    /// @param selector The function selector.
    /// @param oldImpl The implementation contract address being replaced.
    /// @param newImpl The replacement implementation contract address.
    event ProxyFunctionUpdated(bytes4 indexed selector, address oldImpl, address newImpl);
    /// @dev Roll back to a prior implementation of a function.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl) external;
    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl) external;
    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        view
        returns (uint256 rollbackLength);
    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        view
        returns (address impl);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
/// @dev Feature that allows spending token allowances.
interface ITokenSpender {
    /// @dev Transfers ERC20 tokens from `owner` to `to`.
    ///      Only callable from within.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _spendERC20Tokens(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        external;
    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner`.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function getSpendableERC20BalanceOf(IERC20TokenV06 token, address owner)
        external
        view
        returns (uint256 amount);
    /// @dev Get the address of the allowance target.
    /// @return target The target of token allowances.
    function getAllowanceTarget() external view returns (address target);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IERC20TokenV06 {
    // solhint-disable no-simple-event-func-name
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    /// @dev send `value` token to `to` from `msg.sender`
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transfer(address to, uint256 value)
        external
        returns (bool);
    /// @dev send `value` token to `to` from `from` on the condition it is approved by `from`
    /// @param from The address of the sender
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        returns (bool);
    /// @dev `msg.sender` approves `spender` to spend `value` tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @param value The amount of wei to be approved for transfer
    /// @return Always true if the call has enough gas to complete execution
    function approve(address spender, uint256 value)
        external
        returns (bool);
    /// @dev Query total supply of token
    /// @return Total supply of token
    function totalSupply()
        external
        view
        returns (uint256);
    /// @dev Get the balance of `owner`.
    /// @param owner The address from which the balance will be retrieved
    /// @return Balance of owner
    function balanceOf(address owner)
        external
        view
        returns (uint256);
    /// @dev Get the allowance for `spender` to spend from `owner`.
    /// @param owner The address of the account owning tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @return Amount of remaining tokens allowed to spent
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);
    /// @dev Get the number of decimals this token has.
    function decimals()
        external
        view
        returns (uint8);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../transformers/IERC20Transformer.sol";
import "../external/IFlashWallet.sol";
/// @dev Feature to composably transform between ERC20 tokens.
interface ITransformERC20 {
    /// @dev Defines a transformation to run in `transformERC20()`.
    struct Transformation {
        // The deployment nonce for the transformer.
        // The address of the transformer contract will be derived from this
        // value.
        uint32 deploymentNonce;
        // Arbitrary data to pass to the transformer.
        bytes data;
    }
    /// @dev Raised upon a successful `transformERC20`.
    /// @param taker The taker (caller) address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    /// @param outputTokenAmount The amount of `outputToken` received by the taker.
    event TransformedERC20(
        address indexed taker,
        address inputToken,
        address outputToken,
        uint256 inputTokenAmount,
        uint256 outputTokenAmount
    );
    /// @dev Raised when `setTransformerDeployer()` is called.
    /// @param transformerDeployer The new deployer address.
    event TransformerDeployerUpdated(address transformerDeployer);
    /// @dev Replace the allowed deployer for transformers.
    ///      Only callable by the owner.
    /// @param transformerDeployer The address of the trusted deployer for transformers.
    function setTransformerDeployer(address transformerDeployer)
        external;
    /// @dev Deploy a new flash wallet instance and replace the current one with it.
    ///      Useful if we somehow break the current wallet instance.
    ///      Anyone can call this.
    /// @return wallet The new wallet instance.
    function createTransformWallet()
        external
        returns (IFlashWallet wallet);
    /// @dev Executes a series of transformations to convert an ERC20 `inputToken`
    ///      to an ERC20 `outputToken`.
    /// @param inputToken The token being provided by the sender.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the sender.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the sender.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the sender
    ///        must receive for the entire transformation to succeed.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the sender.
    function transformERC20(
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] calldata transformations
    )
        external
        payable
        returns (uint256 outputTokenAmount);
    /// @dev Internal version of `transformERC20()`. Only callable from within.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] calldata transformations
    )
        external
        payable
        returns (uint256 outputTokenAmount);
    /// @dev Return the current wallet instance that will serve as the execution
    ///      context for transformations.
    /// @return wallet The wallet instance.
    function getTransformWallet()
        external
        view
        returns (IFlashWallet wallet);
    /// @dev Return the allowed deployer for transformers.
    /// @return deployer The transform deployer address.
    function getTransformerDeployer()
        external
        view
        returns (address deployer);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
/// @dev A transformation callback used in `TransformERC20.transformERC20()`.
interface IERC20Transformer {
    /// @dev Called from `TransformERC20.transformERC20()`. This will be
    ///      delegatecalled in the context of the FlashWallet instance being used.
    /// @param callDataHash The hash of the `TransformERC20.transformERC20()` calldata.
    /// @param taker The taker address (caller of `TransformERC20.transformERC20()`).
    /// @param data Arbitrary data to pass to the transformer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32 callDataHash,
        address payable taker,
        bytes calldata data
    )
        external
        returns (bytes4 success);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../fixins/FixinCommon.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../storage/LibOwnableStorage.sol";
import "../migrations/LibBootstrap.sol";
import "../migrations/LibMigrate.sol";
import "./IFeature.sol";
import "./IOwnable.sol";
import "./SimpleFunctionRegistry.sol";
/// @dev Owner management features.
contract Ownable is
    IFeature,
    IOwnable,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "Ownable";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The deployed address of this contract.
    address immutable private _implementation;
    // solhint-enable
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initializes this feature. The intial owner will be set to this (ZeroEx)
    ///      to allow the bootstrappers to call `extend()`. Ownership should be
    ///      transferred to the real owner by the bootstrapper after
    ///      bootstrapping is complete.
    /// @return success Magic bytes if successful.
    function bootstrap() external returns (bytes4 success) {
        // Set the owner to ourselves to allow bootstrappers to call `extend()`.
        LibOwnableStorage.getStorage().owner = address(this);
        // Register feature functions.
        SimpleFunctionRegistry(address(this))._extendSelf(this.transferOwnership.selector, _implementation);
        SimpleFunctionRegistry(address(this))._extendSelf(this.owner.selector, _implementation);
        SimpleFunctionRegistry(address(this))._extendSelf(this.migrate.selector, _implementation);
        return LibBootstrap.BOOTSTRAP_SUCCESS;
    }
    /// @dev Change the owner of this contract.
    ///      Only directly callable by the owner.
    /// @param newOwner New owner address.
    function transferOwnership(address newOwner)
        external
        override
        onlyOwner
    {
        LibOwnableStorage.Storage storage proxyStor = LibOwnableStorage.getStorage();
        if (newOwner == address(0)) {
            LibOwnableRichErrors.TransferOwnerToZeroError().rrevert();
        } else {
            proxyStor.owner = newOwner;
            emit OwnershipTransferred(msg.sender, newOwner);
        }
    }
    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      Temporarily sets the owner to ourselves so we can perform admin functions.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param data The call data.
    /// @param newOwner The address of the new owner.
    function migrate(address target, bytes calldata data, address newOwner)
        external
        override
        onlyOwner
    {
        if (newOwner == address(0)) {
            LibOwnableRichErrors.TransferOwnerToZeroError().rrevert();
        }
        LibOwnableStorage.Storage storage stor = LibOwnableStorage.getStorage();
        // The owner will be temporarily set to `address(this)` inside the call.
        stor.owner = address(this);
        // Perform the migration.
        LibMigrate.delegatecallMigrateFunction(target, data);
        // Update the owner.
        stor.owner = newOwner;
        emit Migrated(msg.sender, target, newOwner);
    }
    /// @dev Get the owner of this contract.
    /// @return owner_ The owner of this contract.
    function owner() external override view returns (address owner_) {
        return LibOwnableStorage.getStorage().owner;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibCommonRichErrors.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../features/IOwnable.sol";
/// @dev Common feature utilities.
contract FixinCommon {
    using LibRichErrorsV06 for bytes;
    /// @dev The caller must be this contract.
    modifier onlySelf() virtual {
        if (msg.sender != address(this)) {
            LibCommonRichErrors.OnlyCallableBySelfError(msg.sender).rrevert();
        }
        _;
    }
    /// @dev The caller of this function must be the owner.
    modifier onlyOwner() virtual {
        {
            address owner = IOwnable(address(this)).owner();
            if (msg.sender != owner) {
                LibOwnableRichErrors.OnlyOwnerError(
                    msg.sender,
                    owner
                ).rrevert();
            }
        }
        _;
    }
    /// @dev Encode a feature version as a `uint256`.
    /// @param major The major version number of the feature.
    /// @param minor The minor version number of the feature.
    /// @param revision The revision number of the feature.
    /// @return encodedVersion The encoded version number.
    function _encodeVersion(uint32 major, uint32 minor, uint32 revision)
        internal
        pure
        returns (uint256 encodedVersion)
    {
        return (major << 64) | (minor << 32) | revision;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for the `Ownable` feature.
library LibOwnableStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // The owner of this contract.
        address owner;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.Ownable
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibOwnableRichErrors.sol";
library LibMigrate {
    /// @dev Magic bytes returned by a migrator to indicate success.
    ///      This is `keccack('MIGRATE_SUCCESS')`.
    bytes4 internal constant MIGRATE_SUCCESS = 0x2c64c5ef;
    using LibRichErrorsV06 for bytes;
    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallMigrateFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != MIGRATE_SUCCESS)
        {
            LibOwnableRichErrors.MigrateCallFailedError(target, resultData).rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../fixins/FixinCommon.sol";
import "../storage/LibProxyStorage.sol";
import "../storage/LibSimpleFunctionRegistryStorage.sol";
import "../errors/LibSimpleFunctionRegistryRichErrors.sol";
import "../migrations/LibBootstrap.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";
/// @dev Basic registry management features.
contract SimpleFunctionRegistry is
    IFeature,
    ISimpleFunctionRegistry,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "SimpleFunctionRegistry";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The deployed address of this contract.
    address private immutable _implementation;
    // solhint-enable
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initializes this feature, registering its own functions.
    /// @return success Magic bytes if successful.
    function bootstrap()
        external
        returns (bytes4 success)
    {
        // Register the registration functions (inception vibes).
        _extend(this.extend.selector, _implementation);
        _extend(this._extendSelf.selector, _implementation);
        // Register the rollback function.
        _extend(this.rollback.selector, _implementation);
        // Register getters.
        _extend(this.getRollbackLength.selector, _implementation);
        _extend(this.getRollbackEntryAtIndex.selector, _implementation);
        return LibBootstrap.BOOTSTRAP_SUCCESS;
    }
    /// @dev Roll back to a prior implementation of a function.
    ///      Only directly callable by an authority.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl)
        external
        override
        onlyOwner
    {
        (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        ) = _getStorages();
        address currentImpl = proxyStor.impls[selector];
        if (currentImpl == targetImpl) {
            // Do nothing if already at targetImpl.
            return;
        }
        // Walk history backwards until we find the target implementation.
        address[] storage history = stor.implHistory[selector];
        uint256 i = history.length;
        for (; i > 0; --i) {
            address impl = history[i - 1];
            history.pop();
            if (impl == targetImpl) {
                break;
            }
        }
        if (i == 0) {
            LibSimpleFunctionRegistryRichErrors.NotInRollbackHistoryError(
                selector,
                targetImpl
            ).rrevert();
        }
        proxyStor.impls[selector] = targetImpl;
        emit ProxyFunctionUpdated(selector, currentImpl, targetImpl);
    }
    /// @dev Register or replace a function.
    ///      Only directly callable by an authority.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl)
        external
        override
        onlyOwner
    {
        _extend(selector, impl);
    }
    /// @dev Register or replace a function.
    ///      Only callable from within.
    ///      This function is only used during the bootstrap process and
    ///      should be deregistered by the deployer after bootstrapping is
    ///      complete.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function _extendSelf(bytes4 selector, address impl)
        external
        onlySelf
    {
        _extend(selector, impl);
    }
    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        override
        view
        returns (uint256 rollbackLength)
    {
        return LibSimpleFunctionRegistryStorage.getStorage().implHistory[selector].length;
    }
    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        override
        view
        returns (address impl)
    {
        return LibSimpleFunctionRegistryStorage.getStorage().implHistory[selector][idx];
    }
    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function _extend(bytes4 selector, address impl)
        private
    {
        (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        ) = _getStorages();
        address oldImpl = proxyStor.impls[selector];
        address[] storage history = stor.implHistory[selector];
        history.push(oldImpl);
        proxyStor.impls[selector] = impl;
        emit ProxyFunctionUpdated(selector, oldImpl, impl);
    }
    /// @dev Get the storage buckets for this feature and the proxy.
    /// @return stor Storage bucket for this feature.
    /// @return proxyStor age bucket for the proxy.
    function _getStorages()
        private
        pure
        returns (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        )
    {
        return (
            LibSimpleFunctionRegistryStorage.getStorage(),
            LibProxyStorage.getStorage()
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for the `SimpleFunctionRegistry` feature.
library LibSimpleFunctionRegistryStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // Mapping of function selector -> implementation history.
        mapping(bytes4 => address[]) implHistory;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.SimpleFunctionRegistry
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibSpenderRichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../migrations/LibMigrate.sol";
import "../external/IAllowanceTarget.sol";
import "../storage/LibTokenSpenderStorage.sol";
import "./ITokenSpender.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";
/// @dev Feature that allows spending token allowances.
contract TokenSpender is
    IFeature,
    ITokenSpender,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "TokenSpender";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The implementation address of this feature.
    address private immutable _implementation;
    // solhint-enable
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initialize and register this feature. Should be delegatecalled
    ///      into during a `Migrate.migrate()`.
    /// @param allowanceTarget An `allowanceTarget` instance, configured to have
    ///        the ZeroeEx contract as an authority.
    /// @return success `MIGRATE_SUCCESS` on success.
    function migrate(IAllowanceTarget allowanceTarget) external returns (bytes4 success) {
        LibTokenSpenderStorage.getStorage().allowanceTarget = allowanceTarget;
        ISimpleFunctionRegistry(address(this))
            .extend(this.getAllowanceTarget.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this._spendERC20Tokens.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.getSpendableERC20BalanceOf.selector, _implementation);
        return LibMigrate.MIGRATE_SUCCESS;
    }
    /// @dev Transfers ERC20 tokens from `owner` to `to`. Only callable from within.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _spendERC20Tokens(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        external
        override
        onlySelf
    {
        IAllowanceTarget spender = LibTokenSpenderStorage.getStorage().allowanceTarget;
        // Have the allowance target execute an ERC20 `transferFrom()`.
        (bool didSucceed, bytes memory resultData) = address(spender).call(
            abi.encodeWithSelector(
                IAllowanceTarget.executeCall.selector,
                address(token),
                abi.encodeWithSelector(
                    IERC20TokenV06.transferFrom.selector,
                    owner,
                    to,
                    amount
                )
            )
        );
        if (didSucceed) {
            resultData = abi.decode(resultData, (bytes));
        }
        if (!didSucceed || !LibERC20TokenV06.isSuccessfulResult(resultData)) {
            LibSpenderRichErrors.SpenderERC20TransferFromFailedError(
                address(token),
                owner,
                to,
                amount,
                resultData
            ).rrevert();
        }
    }
    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner` by the token spender.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function getSpendableERC20BalanceOf(IERC20TokenV06 token, address owner)
        external
        override
        view
        returns (uint256 amount)
    {
        return LibSafeMathV06.min256(
            token.allowance(owner, address(LibTokenSpenderStorage.getStorage().allowanceTarget)),
            token.balanceOf(owner)
        );
    }
    /// @dev Get the address of the allowance target.
    /// @return target The target of token allowances.
    function getAllowanceTarget()
        external
        override
        view
        returns (address target)
    {
        return address(LibTokenSpenderStorage.getStorage().allowanceTarget);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibSafeMathRichErrorsV06.sol";
library LibSafeMathV06 {
    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        if (c / a != b) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.MULTIPLICATION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b == 0) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.DIVISION_BY_ZERO,
                a,
                b
            ));
        }
        uint256 c = a / b;
        return c;
    }
    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b > a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.SUBTRACTION_UNDERFLOW,
                a,
                b
            ));
        }
        return a - b;
    }
    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        if (c < a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.ADDITION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }
    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSafeMathRichErrorsV06 {
    // bytes4(keccak256("Uint256BinOpError(uint8,uint256,uint256)"))
    bytes4 internal constant UINT256_BINOP_ERROR_SELECTOR =
        0xe946c1bb;
    // bytes4(keccak256("Uint256DowncastError(uint8,uint256)"))
    bytes4 internal constant UINT256_DOWNCAST_ERROR_SELECTOR =
        0xc996af7b;
    enum BinOpErrorCodes {
        ADDITION_OVERFLOW,
        MULTIPLICATION_OVERFLOW,
        SUBTRACTION_UNDERFLOW,
        DIVISION_BY_ZERO
    }
    enum DowncastErrorCodes {
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT32,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT64,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT96
    }
    // solhint-disable func-name-mixedcase
    function Uint256BinOpError(
        BinOpErrorCodes errorCode,
        uint256 a,
        uint256 b
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_BINOP_ERROR_SELECTOR,
            errorCode,
            a,
            b
        );
    }
    function Uint256DowncastError(
        DowncastErrorCodes errorCode,
        uint256 a
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_DOWNCAST_ERROR_SELECTOR,
            errorCode,
            a
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "./IERC20TokenV06.sol";
library LibERC20TokenV06 {
    bytes constant private DECIMALS_CALL_DATA = hex"313ce567";
    /// @dev Calls `IERC20TokenV06(token).approve()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param spender The address that receives an allowance.
    /// @param allowance The allowance to set.
    function compatApprove(
        IERC20TokenV06 token,
        address spender,
        uint256 allowance
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.approve.selector,
            spender,
            allowance
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }
    /// @dev Calls `IERC20TokenV06(token).approve()` and sets the allowance to the
    ///      maximum if the current approval is not already >= an amount.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param spender The address that receives an allowance.
    /// @param amount The minimum allowance needed.
    function approveIfBelow(
        IERC20TokenV06 token,
        address spender,
        uint256 amount
    )
        internal
    {
        if (token.allowance(address(this), spender) < amount) {
            compatApprove(token, spender, uint256(-1));
        }
    }
    /// @dev Calls `IERC20TokenV06(token).transfer()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param to The address that receives the tokens
    /// @param amount Number of tokens to transfer.
    function compatTransfer(
        IERC20TokenV06 token,
        address to,
        uint256 amount
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.transfer.selector,
            to,
            amount
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }
    /// @dev Calls `IERC20TokenV06(token).transferFrom()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param from The owner of the tokens.
    /// @param to The address that receives the tokens
    /// @param amount Number of tokens to transfer.
    function compatTransferFrom(
        IERC20TokenV06 token,
        address from,
        address to,
        uint256 amount
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.transferFrom.selector,
            from,
            to,
            amount
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }
    /// @dev Retrieves the number of decimals for a token.
    ///      Returns `18` if the call reverts.
    /// @param token The address of the token contract.
    /// @return tokenDecimals The number of decimals places for the token.
    function compatDecimals(IERC20TokenV06 token)
        internal
        view
        returns (uint8 tokenDecimals)
    {
        tokenDecimals = 18;
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(DECIMALS_CALL_DATA);
        if (didSucceed && resultData.length == 32) {
            tokenDecimals = uint8(LibBytesV06.readUint256(resultData, 0));
        }
    }
    /// @dev Retrieves the allowance for a token, owner, and spender.
    ///      Returns `0` if the call reverts.
    /// @param token The address of the token contract.
    /// @param owner The owner of the tokens.
    /// @param spender The address the spender.
    /// @return allowance_ The allowance for a token, owner, and spender.
    function compatAllowance(IERC20TokenV06 token, address owner, address spender)
        internal
        view
        returns (uint256 allowance_)
    {
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(
            abi.encodeWithSelector(
                token.allowance.selector,
                owner,
                spender
            )
        );
        if (didSucceed && resultData.length == 32) {
            allowance_ = LibBytesV06.readUint256(resultData, 0);
        }
    }
    /// @dev Retrieves the balance for a token owner.
    ///      Returns `0` if the call reverts.
    /// @param token The address of the token contract.
    /// @param owner The owner of the tokens.
    /// @return balance The token balance of an owner.
    function compatBalanceOf(IERC20TokenV06 token, address owner)
        internal
        view
        returns (uint256 balance)
    {
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(
            abi.encodeWithSelector(
                token.balanceOf.selector,
                owner
            )
        );
        if (didSucceed && resultData.length == 32) {
            balance = LibBytesV06.readUint256(resultData, 0);
        }
    }
    /// @dev Check if the data returned by a non-static call to an ERC20 token
    ///      is a successful result. Supported functions are `transfer()`,
    ///      `transferFrom()`, and `approve()`.
    /// @param resultData The raw data returned by a non-static call to the ERC20 token.
    /// @return isSuccessful Whether the result data indicates success.
    function isSuccessfulResult(bytes memory resultData)
        internal
        pure
        returns (bool isSuccessful)
    {
        if (resultData.length == 0) {
            return true;
        }
        if (resultData.length == 32) {
            uint256 result = LibBytesV06.readUint256(resultData, 0);
            if (result == 1) {
                return true;
            }
        }
    }
    /// @dev Executes a call on address `target` with calldata `callData`
    ///      and asserts that either nothing was returned or a single boolean
    ///      was returned equal to `true`.
    /// @param target The call target.
    /// @param callData The abi-encoded call data.
    function _callWithOptionalBooleanResult(
        address target,
        bytes memory callData
    )
        private
    {
        (bool didSucceed, bytes memory resultData) = target.call(callData);
        if (didSucceed && isSuccessfulResult(resultData)) {
            return;
        }
        LibRichErrorsV06.rrevert(resultData);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
import "../external/IAllowanceTarget.sol";
/// @dev Storage helpers for the `TokenSpender` feature.
library LibTokenSpenderStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // Allowance target contract.
        IAllowanceTarget allowanceTarget;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.TokenSpender
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../migrations/LibMigrate.sol";
import "../external/IFlashWallet.sol";
import "../external/FlashWallet.sol";
import "../storage/LibTransformERC20Storage.sol";
import "../transformers/IERC20Transformer.sol";
import "../transformers/LibERC20Transformer.sol";
import "./ITransformERC20.sol";
import "./ITokenSpender.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";
/// @dev Feature to composably transform between ERC20 tokens.
contract TransformERC20 is
    IFeature,
    ITransformERC20,
    FixinCommon
{
    /// @dev Stack vars for `_transformERC20Private()`.
    struct TransformERC20PrivateState {
        IFlashWallet wallet;
        address transformerDeployer;
        uint256 takerOutputTokenBalanceBefore;
        uint256 takerOutputTokenBalanceAfter;
    }
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "TransformERC20";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The implementation address of this feature.
    address private immutable _implementation;
    // solhint-enable
    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initialize and register this feature.
    ///      Should be delegatecalled by `Migrate.migrate()`.
    /// @param transformerDeployer The trusted deployer for transformers.
    /// @return success `LibMigrate.SUCCESS` on success.
    function migrate(address transformerDeployer) external returns (bytes4 success) {
        ISimpleFunctionRegistry(address(this))
            .extend(this.getTransformerDeployer.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.createTransformWallet.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.getTransformWallet.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.setTransformerDeployer.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.transformERC20.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this._transformERC20.selector, _implementation);
        createTransformWallet();
        LibTransformERC20Storage.getStorage().transformerDeployer = transformerDeployer;
        return LibMigrate.MIGRATE_SUCCESS;
    }
    /// @dev Replace the allowed deployer for transformers.
    ///      Only callable by the owner.
    /// @param transformerDeployer The address of the trusted deployer for transformers.
    function setTransformerDeployer(address transformerDeployer)
        external
        override
        onlyOwner
    {
        LibTransformERC20Storage.getStorage().transformerDeployer = transformerDeployer;
        emit TransformerDeployerUpdated(transformerDeployer);
    }
    /// @dev Return the allowed deployer for transformers.
    /// @return deployer The transform deployer address.
    function getTransformerDeployer()
        public
        override
        view
        returns (address deployer)
    {
        return LibTransformERC20Storage.getStorage().transformerDeployer;
    }
    /// @dev Deploy a new wallet instance and replace the current one with it.
    ///      Useful if we somehow break the current wallet instance.
    ///      Anyone can call this.
    /// @return wallet The new wallet instance.
    function createTransformWallet()
        public
        override
        returns (IFlashWallet wallet)
    {
        wallet = new FlashWallet();
        LibTransformERC20Storage.getStorage().wallet = wallet;
    }
    /// @dev Executes a series of transformations to convert an ERC20 `inputToken`
    ///      to an ERC20 `outputToken`.
    /// @param inputToken The token being provided by the sender.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the sender.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the sender.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the sender
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the sender.
    function transformERC20(
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        public
        override
        payable
        returns (uint256 outputTokenAmount)
    {
        return _transformERC20Private(
            keccak256(msg.data),
            msg.sender,
            inputToken,
            outputToken,
            inputTokenAmount,
            minOutputTokenAmount,
            transformations
        );
    }
    /// @dev Internal version of `transformERC20()`. Only callable from within.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        public
        override
        payable
        onlySelf
        returns (uint256 outputTokenAmount)
    {
        return _transformERC20Private(
            callDataHash,
            taker,
            inputToken,
            outputToken,
            inputTokenAmount,
            minOutputTokenAmount,
            transformations
        );
    }
    /// @dev Private version of `transformERC20()`.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20Private(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        private
        returns (uint256 outputTokenAmount)
    {
        // If the input token amount is -1, transform the taker's entire
        // spendable balance.
        if (inputTokenAmount == uint256(-1)) {
            inputTokenAmount = ITokenSpender(address(this))
                .getSpendableERC20BalanceOf(inputToken, taker);
        }
        TransformERC20PrivateState memory state;
        state.wallet = getTransformWallet();
        state.transformerDeployer = getTransformerDeployer();
        // Remember the initial output token balance of the taker.
        state.takerOutputTokenBalanceBefore =
            LibERC20Transformer.getTokenBalanceOf(outputToken, taker);
        // Pull input tokens from the taker to the wallet and transfer attached ETH.
        _transferInputTokensAndAttachedEth(
            inputToken,
            taker,
            address(state.wallet),
            inputTokenAmount
        );
        // Perform transformations.
        for (uint256 i = 0; i < transformations.length; ++i) {
            _executeTransformation(
                state.wallet,
                transformations[i],
                state.transformerDeployer,
                taker,
                callDataHash
            );
        }
        // Compute how much output token has been transferred to the taker.
        state.takerOutputTokenBalanceAfter =
            LibERC20Transformer.getTokenBalanceOf(outputToken, taker);
        if (state.takerOutputTokenBalanceAfter > state.takerOutputTokenBalanceBefore) {
            outputTokenAmount = state.takerOutputTokenBalanceAfter.safeSub(
                state.takerOutputTokenBalanceBefore
            );
        } else if (state.takerOutputTokenBalanceAfter < state.takerOutputTokenBalanceBefore) {
            LibTransformERC20RichErrors.NegativeTransformERC20OutputError(
                address(outputToken),
                state.takerOutputTokenBalanceBefore - state.takerOutputTokenBalanceAfter
            ).rrevert();
        }
        // Ensure enough output token has been sent to the taker.
        if (outputTokenAmount < minOutputTokenAmount) {
            LibTransformERC20RichErrors.IncompleteTransformERC20Error(
                address(outputToken),
                outputTokenAmount,
                minOutputTokenAmount
            ).rrevert();
        }
        // Emit an event.
        emit TransformedERC20(
            taker,
            address(inputToken),
            address(outputToken),
            inputTokenAmount,
            outputTokenAmount
        );
    }
    /// @dev Return the current wallet instance that will serve as the execution
    ///      context for transformations.
    /// @return wallet The wallet instance.
    function getTransformWallet()
        public
        override
        view
        returns (IFlashWallet wallet)
    {
        return LibTransformERC20Storage.getStorage().wallet;
    }
    /// @dev Transfer input tokens from the taker and any attached ETH to `to`
    /// @param inputToken The token to pull from the taker.
    /// @param from The from (taker) address.
    /// @param to The recipient of tokens and ETH.
    /// @param amount Amount of `inputToken` tokens to transfer.
    function _transferInputTokensAndAttachedEth(
        IERC20TokenV06 inputToken,
        address from,
        address payable to,
        uint256 amount
    )
        private
    {
        // Transfer any attached ETH.
        if (msg.value != 0) {
            to.transfer(msg.value);
        }
        // Transfer input tokens.
        if (!LibERC20Transformer.isTokenETH(inputToken)) {
            // Token is not ETH, so pull ERC20 tokens.
            ITokenSpender(address(this))._spendERC20Tokens(
                inputToken,
                from,
                to,
                amount
            );
        } else if (msg.value < amount) {
             // Token is ETH, so the caller must attach enough ETH to the call.
            LibTransformERC20RichErrors.InsufficientEthAttachedError(
                msg.value,
                amount
            ).rrevert();
        }
    }
    /// @dev Executs a transformer in the context of `wallet`.
    /// @param wallet The wallet instance.
    /// @param transformation The transformation.
    /// @param transformerDeployer The address of the transformer deployer.
    /// @param taker The taker address.
    /// @param callDataHash Hash of the calldata.
    function _executeTransformation(
        IFlashWallet wallet,
        Transformation memory transformation,
        address transformerDeployer,
        address payable taker,
        bytes32 callDataHash
    )
        private
    {
        // Derive the transformer address from the deployment nonce.
        address payable transformer = LibERC20Transformer.getDeployedAddress(
            transformerDeployer,
            transformation.deploymentNonce
        );
        // Call `transformer.transform()` as the wallet.
        bytes memory resultData = wallet.executeDelegateCall(
            // The call target.
            transformer,
            // Call data.
            abi.encodeWithSelector(
                IERC20Transformer.transform.selector,
                callDataHash,
                taker,
                transformation.data
            )
        );
        // Ensure the transformer returned the magic bytes.
        if (resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != LibERC20Transformer.TRANSFORMER_SUCCESS
        ) {
            LibTransformERC20RichErrors.TransformerFailedError(
                transformer,
                transformation.data,
                resultData
            ).rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
import "../external/IFlashWallet.sol";
/// @dev Storage helpers for the `TokenSpender` feature.
library LibTransformERC20Storage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // The current wallet instance.
        IFlashWallet wallet;
        // The transformer deployer address.
        address transformerDeployer;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.TransformERC20
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
library LibERC20Transformer {
    using LibERC20TokenV06 for IERC20TokenV06;
    /// @dev ETH pseudo-token address.
    address constant internal ETH_TOKEN_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    /// @dev Return value indicating success in `IERC20Transformer.transform()`.
    ///      This is just `keccak256('TRANSFORMER_SUCCESS')`.
    bytes4 constant internal TRANSFORMER_SUCCESS = 0x13c9929e;
    /// @dev Transfer ERC20 tokens and ETH.
    /// @param token An ERC20 or the ETH pseudo-token address (`ETH_TOKEN_ADDRESS`).
    /// @param to The recipient.
    /// @param amount The transfer amount.
    function transformerTransfer(
        IERC20TokenV06 token,
        address payable to,
        uint256 amount
    )
        internal
    {
        if (isTokenETH(token)) {
            to.transfer(amount);
        } else {
            token.compatTransfer(to, amount);
        }
    }
    /// @dev Check if a token is the ETH pseudo-token.
    /// @param token The token to check.
    /// @return isETH `true` if the token is the ETH pseudo-token.
    function isTokenETH(IERC20TokenV06 token)
        internal
        pure
        returns (bool isETH)
    {
        return address(token) == ETH_TOKEN_ADDRESS;
    }
    /// @dev Check the balance of an ERC20 token or ETH.
    /// @param token An ERC20 or the ETH pseudo-token address (`ETH_TOKEN_ADDRESS`).
    /// @param owner Holder of the tokens.
    /// @return tokenBalance The balance of `owner`.
    function getTokenBalanceOf(IERC20TokenV06 token, address owner)
        internal
        view
        returns (uint256 tokenBalance)
    {
        if (isTokenETH(token)) {
            return owner.balance;
        }
        return token.balanceOf(owner);
    }
    /// @dev RLP-encode a 32-bit or less account nonce.
    /// @param nonce A positive integer in the range 0 <= nonce < 2^32.
    /// @return rlpNonce The RLP encoding.
    function rlpEncodeNonce(uint32 nonce)
        internal
        pure
        returns (bytes memory rlpNonce)
    {
        // See https://github.com/ethereum/wiki/wiki/RLP for RLP encoding rules.
        if (nonce == 0) {
            rlpNonce = new bytes(1);
            rlpNonce[0] = 0x80;
        } else if (nonce < 0x80) {
            rlpNonce = new bytes(1);
            rlpNonce[0] = byte(uint8(nonce));
        } else if (nonce <= 0xFF) {
            rlpNonce = new bytes(2);
            rlpNonce[0] = 0x81;
            rlpNonce[1] = byte(uint8(nonce));
        } else if (nonce <= 0xFFFF) {
            rlpNonce = new bytes(3);
            rlpNonce[0] = 0x82;
            rlpNonce[1] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[2] = byte(uint8(nonce));
        } else if (nonce <= 0xFFFFFF) {
            rlpNonce = new bytes(4);
            rlpNonce[0] = 0x83;
            rlpNonce[1] = byte(uint8((nonce & 0xFF0000) >> 16));
            rlpNonce[2] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[3] = byte(uint8(nonce));
        } else {
            rlpNonce = new bytes(5);
            rlpNonce[0] = 0x84;
            rlpNonce[1] = byte(uint8((nonce & 0xFF000000) >> 24));
            rlpNonce[2] = byte(uint8((nonce & 0xFF0000) >> 16));
            rlpNonce[3] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[4] = byte(uint8(nonce));
        }
    }
    /// @dev Compute the expected deployment address by `deployer` at
    ///      the nonce given by `deploymentNonce`.
    /// @param deployer The address of the deployer.
    /// @param deploymentNonce The nonce that the deployer had when deploying
    ///        a contract.
    /// @return deploymentAddress The deployment address.
    function getDeployedAddress(address deployer, uint32 deploymentNonce)
        internal
        pure
        returns (address payable deploymentAddress)
    {
        // The address of if a deployed contract is the lower 20 bytes of the
        // hash of the RLP-encoded deployer's account address + account nonce.
        // See: https://ethereum.stackexchange.com/questions/760/how-is-the-address-of-an-ethereum-contract-computed
        bytes memory rlpNonce = rlpEncodeNonce(deploymentNonce);
        return address(uint160(uint256(keccak256(abi.encodePacked(
            byte(uint8(0xC0 + 21 + rlpNonce.length)),
            byte(uint8(0x80 + 20)),
            deployer,
            rlpNonce
        )))));
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../ZeroEx.sol";
import "../features/IOwnable.sol";
import "../features/TokenSpender.sol";
import "../features/TransformERC20.sol";
import "../external/AllowanceTarget.sol";
import "./InitialMigration.sol";
/// @dev A contract for deploying and configuring the full ZeroEx contract.
contract FullMigration {
    // solhint-disable no-empty-blocks,indent
    /// @dev Features to add the the proxy contract.
    struct Features {
        SimpleFunctionRegistry registry;
        Ownable ownable;
        TokenSpender tokenSpender;
        TransformERC20 transformERC20;
    }
    /// @dev Parameters needed to initialize features.
    struct MigrateOpts {
        address transformerDeployer;
    }
    /// @dev The allowed caller of `deploy()`.
    address public immutable deployer;
    /// @dev The initial migration contract.
    InitialMigration private _initialMigration;
    /// @dev Instantiate this contract and set the allowed caller of `deploy()`
    ///      to `deployer`.
    /// @param deployer_ The allowed caller of `deploy()`.
    constructor(address payable deployer_)
        public
    {
        deployer = deployer_;
        // Create an initial migration contract with this contract set to the
        // allowed deployer.
        _initialMigration = new InitialMigration(address(this));
    }
    /// @dev Deploy the `ZeroEx` contract with the full feature set,
    ///      transfer ownership to `owner`, then self-destruct.
    /// @param owner The owner of the contract.
    /// @param features Features to add to the proxy.
    /// @return zeroEx The deployed and configured `ZeroEx` contract.
    /// @param migrateOpts Parameters needed to initialize features.
    function deploy(
        address payable owner,
        Features memory features,
        MigrateOpts memory migrateOpts
    )
        public
        returns (ZeroEx zeroEx)
    {
        require(msg.sender == deployer, "FullMigration/INVALID_SENDER");
        // Perform the initial migration with the owner set to this contract.
        zeroEx = _initialMigration.deploy(
            address(uint160(address(this))),
            InitialMigration.BootstrapFeatures({
                registry: features.registry,
                ownable: features.ownable
            })
        );
        // Add features.
        _addFeatures(zeroEx, owner, features, migrateOpts);
        // Transfer ownership to the real owner.
        IOwnable(address(zeroEx)).transferOwnership(owner);
        // Self-destruct.
        this.die(owner);
    }
    /// @dev Destroy this contract. Only callable from ourselves (from `deploy()`).
    /// @param ethRecipient Receiver of any ETH in this contract.
    function die(address payable ethRecipient)
        external
        virtual
    {
        require(msg.sender == address(this), "FullMigration/INVALID_SENDER");
        // This contract should not hold any funds but we send
        // them to the ethRecipient just in case.
        selfdestruct(ethRecipient);
    }
    /// @dev Deploy and register features to the ZeroEx contract.
    /// @param zeroEx The bootstrapped ZeroEx contract.
    /// @param owner The ultimate owner of the ZeroEx contract.
    /// @param features Features to add to the proxy.
    /// @param migrateOpts Parameters needed to initialize features.
    function _addFeatures(
        ZeroEx zeroEx,
        address owner,
        Features memory features,
        MigrateOpts memory migrateOpts
    )
        private
    {
        IOwnable ownable = IOwnable(address(zeroEx));
        // TokenSpender
        {
            // Create the allowance target.
            AllowanceTarget allowanceTarget = new AllowanceTarget();
            // Let the ZeroEx contract use the allowance target.
            allowanceTarget.addAuthorizedAddress(address(zeroEx));
            // Transfer ownership of the allowance target to the (real) owner.
            allowanceTarget.transferOwnership(owner);
            // Register the feature.
            ownable.migrate(
                address(features.tokenSpender),
                abi.encodeWithSelector(
                    TokenSpender.migrate.selector,
                    allowanceTarget
                ),
                address(this)
            );
        }
        // TransformERC20
        {
            // Register the feature.
            ownable.migrate(
                address(features.transformERC20),
                abi.encodeWithSelector(
                    TransformERC20.migrate.selector,
                    migrateOpts.transformerDeployer
                ),
                address(this)
            );
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../ZeroEx.sol";
import "../features/IBootstrap.sol";
import "../features/SimpleFunctionRegistry.sol";
import "../features/Ownable.sol";
import "./LibBootstrap.sol";
/// @dev A contract for deploying and configuring a minimal ZeroEx contract.
contract InitialMigration {
    /// @dev Features to bootstrap into the the proxy contract.
    struct BootstrapFeatures {
        SimpleFunctionRegistry registry;
        Ownable ownable;
    }
    /// @dev The allowed caller of `deploy()`. In production, this would be
    ///      the governor.
    address public immutable deployer;
    /// @dev The real address of this contract.
    address private immutable _implementation;
    /// @dev Instantiate this contract and set the allowed caller of `deploy()`
    ///      to `deployer_`.
    /// @param deployer_ The allowed caller of `deploy()`.
    constructor(address deployer_) public {
        deployer = deployer_;
        _implementation = address(this);
    }
    /// @dev Deploy the `ZeroEx` contract with the minimum feature set,
    ///      transfers ownership to `owner`, then self-destructs.
    ///      Only callable by `deployer` set in the contstructor.
    /// @param owner The owner of the contract.
    /// @param features Features to bootstrap into the proxy.
    /// @return zeroEx The deployed and configured `ZeroEx` contract.
    function deploy(address payable owner, BootstrapFeatures memory features)
        public
        virtual
        returns (ZeroEx zeroEx)
    {
        // Must be called by the allowed deployer.
        require(msg.sender == deployer, "InitialMigration/INVALID_SENDER");
        // Deploy the ZeroEx contract, setting ourselves as the bootstrapper.
        zeroEx = new ZeroEx();
        // Bootstrap the initial feature set.
        IBootstrap(address(zeroEx)).bootstrap(
            address(this),
            abi.encodeWithSelector(this.bootstrap.selector, owner, features)
        );
        // Self-destruct. This contract should not hold any funds but we send
        // them to the owner just in case.
        this.die(owner);
    }
    /// @dev Sets up the initial state of the `ZeroEx` contract.
    ///      The `ZeroEx` contract will delegatecall into this function.
    /// @param owner The new owner of the ZeroEx contract.
    /// @param features Features to bootstrap into the proxy.
    /// @return success Magic bytes if successful.
    function bootstrap(address owner, BootstrapFeatures memory features)
        public
        virtual
        returns (bytes4 success)
    {
        // Deploy and migrate the initial features.
        // Order matters here.
        // Initialize Registry.
        LibBootstrap.delegatecallBootstrapFunction(
            address(features.registry),
            abi.encodeWithSelector(
                SimpleFunctionRegistry.bootstrap.selector
            )
        );
        // Initialize Ownable.
        LibBootstrap.delegatecallBootstrapFunction(
            address(features.ownable),
            abi.encodeWithSelector(
                Ownable.bootstrap.selector
            )
        );
        // De-register `SimpleFunctionRegistry._extendSelf`.
        SimpleFunctionRegistry(address(this)).rollback(
            SimpleFunctionRegistry._extendSelf.selector,
            address(0)
        );
        // Transfer ownership to the real owner.
        Ownable(address(this)).transferOwnership(owner);
        success = LibBootstrap.BOOTSTRAP_SUCCESS;
    }
    /// @dev Self-destructs this contract. Only callable by this contract.
    /// @param ethRecipient Who to transfer outstanding ETH to.
    function die(address payable ethRecipient) public virtual {
        require(msg.sender == _implementation, "InitialMigration/INVALID_SENDER");
        selfdestruct(ethRecipient);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that transfers tokens to arbitrary addresses.
contract AffiliateFeeTransformer is
    Transformer
{
    // solhint-disable no-empty-blocks
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;
    /// @dev Information for a single fee.
    struct TokenFee {
        // The token to transfer to `recipient`.
        IERC20TokenV06 token;
        // Amount of each `token` to transfer to `recipient`.
        // If `amount == uint256(-1)`, the entire balance of `token` will be
        // transferred.
        uint256 amount;
        // Recipient of `token`.
        address payable recipient;
    }
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev Create this contract.
    constructor()
        public
        Transformer()
    {}
    /// @dev Transfers tokens to recipients.
    /// @param data ABI-encoded `TokenFee[]`, indicating which tokens to transfer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data
    )
        external
        override
        returns (bytes4 success)
    {
        TokenFee[] memory fees = abi.decode(data, (TokenFee[]));
        // Transfer tokens to recipients.
        for (uint256 i = 0; i < fees.length; ++i) {
            uint256 amount = fees[i].amount;
            if (amount == MAX_UINT256) {
                amount = LibERC20Transformer.getTokenBalanceOf(fees[i].token, address(this));
            }
            if (amount != 0) {
                fees[i].token.transformerTransfer(fees[i].recipient, amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./IERC20Transformer.sol";
/// @dev Abstract base class for transformers.
abstract contract Transformer is
    IERC20Transformer
{
    using LibRichErrorsV06 for bytes;
    /// @dev The address of the deployer.
    address public immutable deployer;
    /// @dev The original address of this contract.
    address private immutable _implementation;
    /// @dev Create this contract.
    constructor() public {
        deployer = msg.sender;
        _implementation = address(this);
    }
    /// @dev Destruct this contract. Only callable by the deployer and will not
    ///      succeed in the context of a delegatecall (from another contract).
    /// @param ethRecipient The recipient of ETH held in this contract.
    function die(address payable ethRecipient)
        external
        virtual
    {
        // Only the deployer can call this.
        if (msg.sender != deployer) {
            LibTransformERC20RichErrors
                .OnlyCallableByDeployerError(msg.sender, deployer)
                .rrevert();
        }
        // Must be executing our own context.
        if (address(this) != _implementation) {
            LibTransformERC20RichErrors
                .InvalidExecutionContextError(address(this), _implementation)
                .rrevert();
        }
        selfdestruct(ethRecipient);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "../vendor/v3/IExchange.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that fills an ERC20 market sell/buy quote.
contract FillQuoteTransformer is
    Transformer
{
    using LibERC20TokenV06 for IERC20TokenV06;
    using LibERC20Transformer for IERC20TokenV06;
    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;
    /// @dev Whether we are performing a market sell or buy.
    enum Side {
        Sell,
        Buy
    }
    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // Whether we aer performing a market sell or buy.
        Side side;
        // The token being sold.
        // This should be an actual token, not the ETH pseudo-token.
        IERC20TokenV06 sellToken;
        // The token being bought.
        // This should be an actual token, not the ETH pseudo-token.
        IERC20TokenV06 buyToken;
        // The orders to fill.
        IExchange.Order[] orders;
        // Signatures for each respective order in `orders`.
        bytes[] signatures;
        // Maximum fill amount for each order. This may be shorter than the
        // number of orders, where missing entries will be treated as `uint256(-1)`.
        // For sells, this will be the maximum sell amount (taker asset).
        // For buys, this will be the maximum buy amount (maker asset).
        uint256[] maxOrderFillAmounts;
        // Amount of `sellToken` to sell or `buyToken` to buy.
        // For sells, this may be `uint256(-1)` to sell the entire balance of
        // `sellToken`.
        uint256 fillAmount;
    }
    /// @dev Results of a call to `_fillOrder()`.
    struct FillOrderResults {
        // The amount of taker tokens sold, according to balance checks.
        uint256 takerTokenSoldAmount;
        // The amount of maker tokens sold, according to balance checks.
        uint256 makerTokenBoughtAmount;
        // The amount of protocol fee paid.
        uint256 protocolFeePaid;
    }
    /// @dev The Exchange ERC20Proxy ID.
    bytes4 private constant ERC20_ASSET_PROXY_ID = 0xf47261b0;
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev The Exchange contract.
    IExchange public immutable exchange;
    /// @dev The ERC20Proxy address.
    address public immutable erc20Proxy;
    /// @dev Create this contract.
    /// @param exchange_ The Exchange V3 instance.
    constructor(IExchange exchange_)
        public
        Transformer()
    {
        exchange = exchange_;
        erc20Proxy = exchange_.getAssetProxy(ERC20_ASSET_PROXY_ID);
    }
    /// @dev Sell this contract's entire balance of of `sellToken` in exchange
    ///      for `buyToken` by filling `orders`. Protocol fees should be attached
    ///      to this call. `buyToken` and excess ETH will be transferred back to the caller.
    /// @param data_ ABI-encoded `TransformData`.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        // Validate data fields.
        if (data.sellToken.isTokenETH() || data.buyToken.isTokenETH()) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_TOKENS,
                data_
            ).rrevert();
        }
        if (data.orders.length != data.signatures.length) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_ARRAY_LENGTH,
                data_
            ).rrevert();
        }
        if (data.side == Side.Sell && data.fillAmount == MAX_UINT256) {
            // If `sellAmount == -1 then we are selling
            // the entire balance of `sellToken`. This is useful in cases where
            // the exact sell amount is not exactly known in advance, like when
            // unwrapping Chai/cUSDC/cDAI.
            data.fillAmount = data.sellToken.getTokenBalanceOf(address(this));
        }
        // Approve the ERC20 proxy to spend `sellToken`.
        data.sellToken.approveIfBelow(erc20Proxy, data.fillAmount);
        // Fill the orders.
        uint256 singleProtocolFee = exchange.protocolFeeMultiplier().safeMul(tx.gasprice);
        uint256 ethRemaining = address(this).balance;
        uint256 boughtAmount = 0;
        uint256 soldAmount = 0;
        for (uint256 i = 0; i < data.orders.length; ++i) {
            // Check if we've hit our targets.
            if (data.side == Side.Sell) {
                // Market sell check.
                if (soldAmount >= data.fillAmount) {
                    break;
                }
            } else {
                // Market buy check.
                if (boughtAmount >= data.fillAmount) {
                    break;
                }
            }
            // Ensure we have enough ETH to cover the protocol fee.
            if (ethRemaining < singleProtocolFee) {
                LibTransformERC20RichErrors
                    .InsufficientProtocolFeeError(ethRemaining, singleProtocolFee)
                    .rrevert();
            }
            // Fill the order.
            FillOrderResults memory results;
            if (data.side == Side.Sell) {
                // Market sell.
                results = _sellToOrder(
                    data.buyToken,
                    data.sellToken,
                    data.orders[i],
                    data.signatures[i],
                    data.fillAmount.safeSub(soldAmount).min256(
                        data.maxOrderFillAmounts.length > i
                        ? data.maxOrderFillAmounts[i]
                        : MAX_UINT256
                    ),
                    singleProtocolFee
                );
            } else {
                // Market buy.
                results = _buyFromOrder(
                    data.buyToken,
                    data.sellToken,
                    data.orders[i],
                    data.signatures[i],
                    data.fillAmount.safeSub(boughtAmount).min256(
                        data.maxOrderFillAmounts.length > i
                        ? data.maxOrderFillAmounts[i]
                        : MAX_UINT256
                    ),
                    singleProtocolFee
                );
            }
            // Accumulate totals.
            soldAmount = soldAmount.safeAdd(results.takerTokenSoldAmount);
            boughtAmount = boughtAmount.safeAdd(results.makerTokenBoughtAmount);
            ethRemaining = ethRemaining.safeSub(results.protocolFeePaid);
        }
        // Ensure we hit our targets.
        if (data.side == Side.Sell) {
            // Market sell check.
            if (soldAmount < data.fillAmount) {
                LibTransformERC20RichErrors
                    .IncompleteFillSellQuoteError(
                        address(data.sellToken),
                        soldAmount,
                        data.fillAmount
                    ).rrevert();
            }
        } else {
            // Market buy check.
            if (boughtAmount < data.fillAmount) {
                LibTransformERC20RichErrors
                    .IncompleteFillBuyQuoteError(
                        address(data.buyToken),
                        boughtAmount,
                        data.fillAmount
                    ).rrevert();
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
    /// @dev Try to sell up to `sellAmount` from an order.
    /// @param makerToken The maker/buy token.
    /// @param takerToken The taker/sell token.
    /// @param order The order to fill.
    /// @param signature The signature for `order`.
    /// @param sellAmount Amount of taker token to sell.
    /// @param protocolFee The protocol fee needed to fill `order`.
    function _sellToOrder(
        IERC20TokenV06 makerToken,
        IERC20TokenV06 takerToken,
        IExchange.Order memory order,
        bytes memory signature,
        uint256 sellAmount,
        uint256 protocolFee
    )
        private
        returns (FillOrderResults memory results)
    {
        IERC20TokenV06 takerFeeToken =
            _getTokenFromERC20AssetData(order.takerFeeAssetData);
        uint256 takerTokenFillAmount = sellAmount;
        if (order.takerFee != 0) {
            if (takerFeeToken == makerToken) {
                // Taker fee is payable in the maker token, so we need to
                // approve the proxy to spend the maker token.
                // It isn't worth computing the actual taker fee
                // since `approveIfBelow()` will set the allowance to infinite. We
                // just need a reasonable upper bound to avoid unnecessarily re-approving.
                takerFeeToken.approveIfBelow(erc20Proxy, order.takerFee);
            } else if (takerFeeToken == takerToken){
                // Taker fee is payable in the taker token, so we need to
                // reduce the fill amount to cover the fee.
                // takerTokenFillAmount' =
                //   (takerTokenFillAmount * order.takerAssetAmount) /
                //   (order.takerAssetAmount + order.takerFee)
                takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
                    order.takerAssetAmount,
                    order.takerAssetAmount.safeAdd(order.takerFee),
                    sellAmount
                );
            } else {
                //  Only support taker or maker asset denominated taker fees.
                LibTransformERC20RichErrors.InvalidTakerFeeTokenError(
                    address(takerFeeToken)
                ).rrevert();
            }
        }
        // Clamp fill amount to order size.
        takerTokenFillAmount = LibSafeMathV06.min256(
            takerTokenFillAmount,
            order.takerAssetAmount
        );
        // Perform the fill.
        return _fillOrder(
            order,
            signature,
            takerTokenFillAmount,
            protocolFee,
            makerToken,
            takerFeeToken == takerToken
        );
    }
    /// @dev Try to buy up to `buyAmount` from an order.
    /// @param makerToken The maker/buy token.
    /// @param takerToken The taker/sell token.
    /// @param order The order to fill.
    /// @param signature The signature for `order`.
    /// @param buyAmount Amount of maker token to buy.
    /// @param protocolFee The protocol fee needed to fill `order`.
    function _buyFromOrder(
        IERC20TokenV06 makerToken,
        IERC20TokenV06 takerToken,
        IExchange.Order memory order,
        bytes memory signature,
        uint256 buyAmount,
        uint256 protocolFee
    )
        private
        returns (FillOrderResults memory results)
    {
        IERC20TokenV06 takerFeeToken =
            _getTokenFromERC20AssetData(order.takerFeeAssetData);
        // Compute the default taker token fill amount.
        uint256 takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
            buyAmount,
            order.makerAssetAmount,
            order.takerAssetAmount
        );
        if (order.takerFee != 0) {
            if (takerFeeToken == makerToken) {
                // Taker fee is payable in the maker token.
                // Adjust the taker token fill amount to account for maker
                // tokens being lost to the taker fee.
                // takerTokenFillAmount' =
                //  (order.takerAssetAmount * buyAmount) /
                //  (order.makerAssetAmount - order.takerFee)
                takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
                    buyAmount,
                    order.makerAssetAmount.safeSub(order.takerFee),
                    order.takerAssetAmount
                );
                // Approve the proxy to spend the maker token.
                // It isn't worth computing the actual taker fee
                // since `approveIfBelow()` will set the allowance to infinite. We
                // just need a reasonable upper bound to avoid unnecessarily re-approving.
                takerFeeToken.approveIfBelow(erc20Proxy, order.takerFee);
            } else if (takerFeeToken != takerToken) {
                //  Only support taker or maker asset denominated taker fees.
                LibTransformERC20RichErrors.InvalidTakerFeeTokenError(
                    address(takerFeeToken)
                ).rrevert();
            }
        }
        // Clamp to order size.
        takerTokenFillAmount = LibSafeMathV06.min256(
            order.takerAssetAmount,
            takerTokenFillAmount
        );
        // Perform the fill.
        return _fillOrder(
            order,
            signature,
            takerTokenFillAmount,
            protocolFee,
            makerToken,
            takerFeeToken == takerToken
        );
    }
    /// @dev Attempt to fill an order. If the fill reverts, the revert will be
    ///      swallowed and `results` will be zeroed out.
    /// @param order The order to fill.
    /// @param signature The order signature.
    /// @param takerAssetFillAmount How much taker asset to fill.
    /// @param protocolFee The protocol fee needed to fill this order.
    /// @param makerToken The maker token.
    /// @param isTakerFeeInTakerToken Whether the taker fee token is the same as the
    ///        taker token.
    function _fillOrder(
        IExchange.Order memory order,
        bytes memory signature,
        uint256 takerAssetFillAmount,
        uint256 protocolFee,
        IERC20TokenV06 makerToken,
        bool isTakerFeeInTakerToken
    )
        private
        returns (FillOrderResults memory results)
    {
        // Track changes in the maker token balance.
        uint256 initialMakerTokenBalance = makerToken.balanceOf(address(this));
        try
            exchange.fillOrder
                {value: protocolFee}
                (order, takerAssetFillAmount, signature)
            returns (IExchange.FillResults memory fillResults)
        {
            // Update maker quantity based on changes in token balances.
            results.makerTokenBoughtAmount = makerToken.balanceOf(address(this))
                .safeSub(initialMakerTokenBalance);
            // We can trust the other fill result quantities.
            results.protocolFeePaid = fillResults.protocolFeePaid;
            results.takerTokenSoldAmount = fillResults.takerAssetFilledAmount;
            // If the taker fee is payable in the taker asset, include the
            // taker fee in the total amount sold.
            if (isTakerFeeInTakerToken) {
                results.takerTokenSoldAmount =
                    results.takerTokenSoldAmount.safeAdd(fillResults.takerFeePaid);
            }
        } catch (bytes memory) {
            // Swallow failures, leaving all results as zero.
        }
    }
    /// @dev Extract the token from plain ERC20 asset data.
    ///      If the asset-data is empty, a zero token address will be returned.
    /// @param assetData The order asset data.
    function _getTokenFromERC20AssetData(bytes memory assetData)
        private
        pure
        returns (IERC20TokenV06 token)
    {
        if (assetData.length == 0) {
            return IERC20TokenV06(address(0));
        }
        if (assetData.length != 36 ||
            LibBytesV06.readBytes4(assetData, 0) != ERC20_ASSET_PROXY_ID)
        {
            LibTransformERC20RichErrors
                .InvalidERC20AssetDataError(assetData)
                .rrevert();
        }
        return IERC20TokenV06(LibBytesV06.readAddress(assetData, 16));
    }
}
/*
  Copyright 2019 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./LibSafeMathV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibMathRichErrorsV06.sol";
library LibMathV06 {
    using LibSafeMathV06 for uint256;
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function safeGetPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorFloor(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function safeGetPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorCeil(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function getPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function getPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Checks if rounding error >= 0.1% when rounding down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }
        // The absolute rounding error is the difference between the rounded
        // value and the ideal value. The relative rounding error is the
        // absolute rounding error divided by the absolute value of the
        // ideal value. This is undefined when the ideal value is zero.
        //
        // The ideal value is `numerator * target / denominator`.
        // Let's call `numerator * target % denominator` the remainder.
        // The absolute error is `remainder / denominator`.
        //
        // When the ideal value is zero, we require the absolute error to
        // be zero. Fortunately, this is always the case. The ideal value is
        // zero iff `numerator == 0` and/or `target == 0`. In this case the
        // remainder and absolute error are also zero.
        if (target == 0 || numerator == 0) {
            return false;
        }
        // Otherwise, we want the relative rounding error to be strictly
        // less than 0.1%.
        // The relative error is `remainder / (numerator * target)`.
        // We want the relative error less than 1 / 1000:
        //        remainder / (numerator * denominator)  <  1 / 1000
        // or equivalently:
        //        1000 * remainder  <  numerator * target
        // so we have a rounding error iff:
        //        1000 * remainder  >=  numerator * target
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
    /// @dev Checks if rounding error >= 0.1% when rounding up.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }
        // See the comments in `isRoundingError`.
        if (target == 0 || numerator == 0) {
            // When either is zero, the ideal value and rounded value are zero
            // and there is no rounding error. (Although the relative error
            // is undefined.)
            return false;
        }
        // Compute remainder as before
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        remainder = denominator.safeSub(remainder) % denominator;
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibMathRichErrorsV06 {
    // bytes4(keccak256("DivisionByZeroError()"))
    bytes internal constant DIVISION_BY_ZERO_ERROR =
        hex"a791837c";
    // bytes4(keccak256("RoundingError(uint256,uint256,uint256)"))
    bytes4 internal constant ROUNDING_ERROR_SELECTOR =
        0x339f3de2;
    // solhint-disable func-name-mixedcase
    function DivisionByZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return DIVISION_BY_ZERO_ERROR;
    }
    function RoundingError(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ROUNDING_ERROR_SELECTOR,
            numerator,
            denominator,
            target
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Interface to the V3 Exchange.
interface IExchange {
    /// @dev V3 Order structure.
    struct Order {
        // Address that created the order.
        address makerAddress;
        // Address that is allowed to fill the order.
        // If set to 0, any address is allowed to fill the order.
        address takerAddress;
        // Address that will recieve fees when order is filled.
        address feeRecipientAddress;
        // Address that is allowed to call Exchange contract methods that affect this order.
        // If set to 0, any address is allowed to call these methods.
        address senderAddress;
        // Amount of makerAsset being offered by maker. Must be greater than 0.
        uint256 makerAssetAmount;
        // Amount of takerAsset being bid on by maker. Must be greater than 0.
        uint256 takerAssetAmount;
        // Fee paid to feeRecipient by maker when order is filled.
        uint256 makerFee;
        // Fee paid to feeRecipient by taker when order is filled.
        uint256 takerFee;
        // Timestamp in seconds at which order expires.
        uint256 expirationTimeSeconds;
        // Arbitrary number to facilitate uniqueness of the order's hash.
        uint256 salt;
        // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes makerAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes takerAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring makerFeeAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes makerFeeAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring takerFeeAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes takerFeeAssetData;
    }
    /// @dev V3 `fillOrder()` results.`
    struct FillResults {
        // Total amount of makerAsset(s) filled.
        uint256 makerAssetFilledAmount;
        // Total amount of takerAsset(s) filled.
        uint256 takerAssetFilledAmount;
        // Total amount of fees paid by maker(s) to feeRecipient(s).
        uint256 makerFeePaid;
        // Total amount of fees paid by taker to feeRecipients(s).
        uint256 takerFeePaid;
        // Total amount of fees paid by taker to the staking contract.
        uint256 protocolFeePaid;
    }
    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function fillOrder(
        Order calldata order,
        uint256 takerAssetFillAmount,
        bytes calldata signature
    )
        external
        payable
        returns (FillResults memory fillResults);
    /// @dev Returns the protocolFeeMultiplier
    /// @return multiplier The multiplier for protocol fees.
    function protocolFeeMultiplier()
        external
        view
        returns (uint256 multiplier);
    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return proxyAddress The asset proxy registered to assetProxyId.
    ///         Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address proxyAddress);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that transfers tokens to the taker.
contract PayTakerTransformer is
    Transformer
{
    // solhint-disable no-empty-blocks
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;
    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // The tokens to transfer to the taker.
        IERC20TokenV06[] tokens;
        // Amount of each token in `tokens` to transfer to the taker.
        // `uint(-1)` will transfer the entire balance.
        uint256[] amounts;
    }
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev Create this contract.
    constructor()
        public
        Transformer()
    {}
    /// @dev Forwards tokens to the taker.
    /// @param taker The taker address (caller of `TransformERC20.transformERC20()`).
    /// @param data_ ABI-encoded `TransformData`, indicating which tokens to transfer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        // Transfer tokens directly to the taker.
        for (uint256 i = 0; i < data.tokens.length; ++i) {
            // The `amounts` array can be shorter than the `tokens` array.
            // Missing elements are treated as `uint256(-1)`.
            uint256 amount = data.amounts.length > i ? data.amounts[i] : uint256(-1);
            if (amount == MAX_UINT256) {
                amount = data.tokens[i].getTokenBalanceOf(address(this));
            }
            if (amount != 0) {
                data.tokens[i].transformerTransfer(taker, amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IEtherTokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that wraps or unwraps WETH.
contract WethTransformer is
    Transformer
{
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;
    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // The token to wrap/unwrap. Must be either ETH or WETH.
        IERC20TokenV06 token;
        // Amount of `token` to wrap or unwrap.
        // `uint(-1)` will unwrap the entire balance.
        uint256 amount;
    }
    /// @dev The WETH contract address.
    IEtherTokenV06 public immutable weth;
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev Construct the transformer and store the WETH address in an immutable.
    /// @param weth_ The weth token.
    constructor(IEtherTokenV06 weth_)
        public
        Transformer()
    {
        weth = weth_;
    }
    /// @dev Wraps and unwraps WETH.
    /// @param data_ ABI-encoded `TransformData`, indicating which token to wrap/umwrap.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        if (!data.token.isTokenETH() && data.token != weth) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_TOKENS,
                data_
            ).rrevert();
        }
        uint256 amount = data.amount;
        if (amount == MAX_UINT256) {
            amount = data.token.getTokenBalanceOf(address(this));
        }
        if (amount != 0) {
            if (data.token.isTokenETH()) {
                // Wrap ETH.
                weth.deposit{value: amount}();
            } else {
                // Unwrap WETH.
                weth.withdraw(amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IERC20TokenV06.sol";
interface IEtherTokenV06 is
    IERC20TokenV06
{
    /// @dev Wrap ether.
    function deposit() external payable;
    /// @dev Unwrap ether.
    function withdraw(uint256 amount) external;
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
interface ITestSimpleFunctionRegistryFeature {
    function testFn() external view returns (uint256 id);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
contract TestCallTarget {
    event CallTargetCalled(
        address context,
        address sender,
        bytes data,
        uint256 value
    );
    bytes4 private constant MAGIC_BYTES = 0x12345678;
    bytes private constant REVERTING_DATA = hex"1337";
    fallback() external payable {
        if (keccak256(msg.data) == keccak256(REVERTING_DATA)) {
            revert("TestCallTarget/REVERT");
        }
        emit CallTargetCalled(
            address(this),
            msg.sender,
            msg.data,
            msg.value
        );
        bytes4 rval = MAGIC_BYTES;
        assembly {
            mstore(0, rval)
            return(0, 32)
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
contract TestDelegateCaller {
    function executeDelegateCall(
        address target,
        bytes calldata callData
    )
        external
    {
        (bool success, bytes memory resultData) = target.delegatecall(callData);
        if (!success) {
            assembly { revert(add(resultData, 32), mload(resultData)) }
        }
        assembly { return(add(resultData, 32), mload(resultData)) }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../src/vendor/v3/IExchange.sol";
import "./TestMintableERC20Token.sol";
contract TestFillQuoteTransformerExchange {
    struct FillBehavior {
        // How much of the order is filled, in taker asset amount.
        uint256 filledTakerAssetAmount;
        // Scaling for maker assets minted, in 1e18.
        uint256 makerAssetMintRatio;
    }
    uint256 private constant PROTOCOL_FEE_MULTIPLIER = 1337;
    using LibSafeMathV06 for uint256;
    function fillOrder(
        IExchange.Order calldata order,
        uint256 takerAssetFillAmount,
        bytes calldata signature
    )
        external
        payable
        returns (IExchange.FillResults memory fillResults)
    {
        require(
            signature.length != 0,
            "TestFillQuoteTransformerExchange/INVALID_SIGNATURE"
        );
        // The signature is the ABI-encoded FillBehavior data.
        FillBehavior memory behavior = abi.decode(signature, (FillBehavior));
        uint256 protocolFee = PROTOCOL_FEE_MULTIPLIER * tx.gasprice;
        require(
            msg.value == protocolFee,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_PROTOCOL_FEE"
        );
        // Return excess protocol fee.
        msg.sender.transfer(msg.value - protocolFee);
        // Take taker tokens.
        TestMintableERC20Token takerToken = _getTokenFromAssetData(order.takerAssetData);
        takerAssetFillAmount = LibSafeMathV06.min256(
            order.takerAssetAmount.safeSub(behavior.filledTakerAssetAmount),
            takerAssetFillAmount
        );
        require(
            takerToken.getSpendableAmount(msg.sender, address(this)) >= takerAssetFillAmount,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_TAKER_FUNDS"
        );
        takerToken.transferFrom(msg.sender, order.makerAddress, takerAssetFillAmount);
        // Mint maker tokens.
        uint256 makerAssetFilledAmount = LibMathV06.getPartialAmountFloor(
            takerAssetFillAmount,
            order.takerAssetAmount,
            order.makerAssetAmount
        );
        TestMintableERC20Token makerToken = _getTokenFromAssetData(order.makerAssetData);
        makerToken.mint(
            msg.sender,
            LibMathV06.getPartialAmountFloor(
                behavior.makerAssetMintRatio,
                1e18,
                makerAssetFilledAmount
            )
        );
        // Take taker fee.
        TestMintableERC20Token takerFeeToken = _getTokenFromAssetData(order.takerFeeAssetData);
        uint256 takerFee = LibMathV06.getPartialAmountFloor(
            takerAssetFillAmount,
            order.takerAssetAmount,
            order.takerFee
        );
        require(
            takerFeeToken.getSpendableAmount(msg.sender, address(this)) >= takerFee,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_TAKER_FEE_FUNDS"
        );
        takerFeeToken.transferFrom(msg.sender, order.feeRecipientAddress, takerFee);
        fillResults.makerAssetFilledAmount = makerAssetFilledAmount;
        fillResults.takerAssetFilledAmount = takerAssetFillAmount;
        fillResults.makerFeePaid = uint256(-1);
        fillResults.takerFeePaid = takerFee;
        fillResults.protocolFeePaid = protocolFee;
    }
    function encodeBehaviorData(FillBehavior calldata behavior)
        external
        pure
        returns (bytes memory encoded)
    {
        return abi.encode(behavior);
    }
    function protocolFeeMultiplier()
        external
        pure
        returns (uint256)
    {
        return PROTOCOL_FEE_MULTIPLIER;
    }
    function getAssetProxy(bytes4)
        external
        view
        returns (address)
    {
        return address(this);
    }
    function _getTokenFromAssetData(bytes memory assetData)
        private
        pure
        returns (TestMintableERC20Token token)
    {
        return TestMintableERC20Token(LibBytesV06.readAddress(assetData, 16));
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
contract TestMintableERC20Token {
    mapping(address => uint256) public balanceOf;
    mapping(address => mapping(address => uint256)) public allowance;
    function transfer(address to, uint256 amount)
        external
        virtual
        returns (bool)
    {
        return transferFrom(msg.sender, to, amount);
    }
    function approve(address spender, uint256 amount)
        external
        virtual
        returns (bool)
    {
        allowance[msg.sender][spender] = amount;
        return true;
    }
    function mint(address owner, uint256 amount)
        external
        virtual
    {
        balanceOf[owner] += amount;
    }
    function burn(address owner, uint256 amount)
        external
        virtual
    {
        require(balanceOf[owner] >= amount, "TestMintableERC20Token/INSUFFICIENT_FUNDS");
        balanceOf[owner] -= amount;
    }
    function transferFrom(address from, address to, uint256 amount)
        public
        virtual
        returns (bool)
    {
        if (from != msg.sender) {
            require(
                allowance[from][msg.sender] >= amount,
                "TestMintableERC20Token/INSUFFICIENT_ALLOWANCE"
            );
            allowance[from][msg.sender] -= amount;
        }
        require(balanceOf[from] >= amount, "TestMintableERC20Token/INSUFFICIENT_FUNDS");
        balanceOf[from] -= amount;
        balanceOf[to] += amount;
        return true;
    }
    function getSpendableAmount(address owner, address spender)
        external
        view
        returns (uint256)
    {
        return balanceOf[owner] < allowance[owner][spender]
            ? balanceOf[owner]
            : allowance[owner][spender];
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/IERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
import "./TestTransformerHost.sol";
contract TestFillQuoteTransformerHost is
    TestTransformerHost
{
    function executeTransform(
        IERC20Transformer transformer,
        TestMintableERC20Token inputToken,
        uint256 inputTokenAmount,
        bytes calldata data
    )
        external
        payable
    {
        if (inputTokenAmount != 0) {
            inputToken.mint(address(this), inputTokenAmount);
        }
        // Have to make this call externally because transformers aren't payable.
        this.rawExecuteTransform(transformer, bytes32(0), msg.sender, data);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../src/transformers/IERC20Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
contract TestTransformerHost {
    using LibERC20Transformer for IERC20TokenV06;
    using LibRichErrorsV06 for bytes;
    function rawExecuteTransform(
        IERC20Transformer transformer,
        bytes32 callDataHash,
        address taker,
        bytes calldata data
    )
        external
    {
        (bool _success, bytes memory resultData) =
            address(transformer).delegatecall(abi.encodeWithSelector(
                transformer.transform.selector,
                callDataHash,
                taker,
                data
            ));
        if (!_success) {
            resultData.rrevert();
        }
        require(
            abi.decode(resultData, (bytes4)) == LibERC20Transformer.TRANSFORMER_SUCCESS,
            "TestTransformerHost/INVALID_TRANSFORMER_RESULT"
        );
    }
    // solhint-disable
    receive() external payable {}
    // solhint-enable
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/ZeroEx.sol";
import "../src/features/IBootstrap.sol";
import "../src/migrations/FullMigration.sol";
contract TestFullMigration is
    FullMigration
{
    address public dieRecipient;
    // solhint-disable-next-line no-empty-blocks
    constructor(address payable deployer) public FullMigration(deployer) {}
    function die(address payable ethRecipient) external override {
        dieRecipient = ethRecipient;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/ZeroEx.sol";
import "../src/features/IBootstrap.sol";
import "../src/migrations/InitialMigration.sol";
contract TestInitialMigration is
    InitialMigration
{
    address public bootstrapFeature;
    address public dieRecipient;
    // solhint-disable-next-line no-empty-blocks
    constructor(address deployer) public InitialMigration(deployer) {}
    function callBootstrap(ZeroEx zeroEx) external {
        IBootstrap(address(zeroEx)).bootstrap(address(this), new bytes(0));
    }
    function bootstrap(address owner, BootstrapFeatures memory features)
        public
        override
        returns (bytes4 success)
    {
        success = InitialMigration.bootstrap(owner, features);
        // Snoop the bootstrap feature contract.
        bootstrapFeature = ZeroEx(address(uint160(address(this))))
            .getFunctionImplementation(IBootstrap.bootstrap.selector);
    }
    function die(address payable ethRecipient) public override {
        dieRecipient = ethRecipient;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/migrations/LibMigrate.sol";
import "../src/features/IOwnable.sol";
contract TestMigrator {
    event TestMigrateCalled(
        bytes callData,
        address owner
    );
    function succeedingMigrate() external returns (bytes4 success) {
        emit TestMigrateCalled(
            msg.data,
            IOwnable(address(this)).owner()
        );
        return LibMigrate.MIGRATE_SUCCESS;
    }
    function failingMigrate() external returns (bytes4 success) {
        emit TestMigrateCalled(
            msg.data,
            IOwnable(address(this)).owner()
        );
        return 0xdeadbeef;
    }
    function revertingMigrate() external pure {
        revert("OOPSIE");
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../src/transformers/IERC20Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
contract TestMintTokenERC20Transformer is
    IERC20Transformer
{
    struct TransformData {
        IERC20TokenV06 inputToken;
        TestMintableERC20Token outputToken;
        uint256 burnAmount;
        uint256 mintAmount;
        uint256 feeAmount;
    }
    event MintTransform(
        address context,
        address caller,
        bytes32 callDataHash,
        address taker,
        bytes data,
        uint256 inputTokenBalance,
        uint256 ethBalance
    );
    function transform(
        bytes32 callDataHash,
        address payable taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        emit MintTransform(
            address(this),
            msg.sender,
            callDataHash,
            taker,
            data_,
            data.inputToken.balanceOf(address(this)),
            address(this).balance
        );
        // "Burn" input tokens.
        data.inputToken.transfer(address(0), data.burnAmount);
        // Mint output tokens.
        if (LibERC20Transformer.isTokenETH(IERC20TokenV06(address(data.outputToken)))) {
            taker.transfer(data.mintAmount);
        } else {
            data.outputToken.mint(
                taker,
                data.mintAmount
            );
            // Burn fees from output.
            data.outputToken.burn(taker, data.feeAmount);
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/fixins/FixinCommon.sol";
contract TestSimpleFunctionRegistryFeatureImpl1 is
    FixinCommon
{
    function testFn()
        external
        pure
        returns (uint256 id)
    {
        return 1337;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/fixins/FixinCommon.sol";
contract TestSimpleFunctionRegistryFeatureImpl2 is
    FixinCommon
{
    function testFn()
        external
        pure
        returns (uint256 id)
    {
        return 1338;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/features/TokenSpender.sol";
contract TestTokenSpender is
    TokenSpender
{
    modifier onlySelf() override {
        _;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./TestMintableERC20Token.sol";
contract TestTokenSpenderERC20Token is
    TestMintableERC20Token
{
    event TransferFromCalled(
        address sender,
        address from,
        address to,
        uint256 amount
    );
    // `transferFrom()` behavior depends on the value of `amount`.
    uint256 constant private EMPTY_RETURN_AMOUNT = 1337;
    uint256 constant private FALSE_RETURN_AMOUNT = 1338;
    uint256 constant private REVERT_RETURN_AMOUNT = 1339;
    function transferFrom(address from, address to, uint256 amount)
        public
        override
        returns (bool)
    {
        emit TransferFromCalled(msg.sender, from, to, amount);
        if (amount == EMPTY_RETURN_AMOUNT) {
            assembly { return(0, 0) }
        }
        if (amount == FALSE_RETURN_AMOUNT) {
            return false;
        }
        if (amount == REVERT_RETURN_AMOUNT) {
            revert("TestTokenSpenderERC20Token/Revert");
        }
        return true;
    }
    function setBalanceAndAllowanceOf(
        address owner,
        uint256 balance,
        address spender,
        uint256 allowance_
    )
        external
    {
        balanceOf[owner] = balance;
        allowance[owner][spender] = allowance_;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/features/TransformERC20.sol";
contract TestTransformERC20 is
    TransformERC20
{
    // solhint-disable no-empty-blocks
    constructor()
        TransformERC20()
        public
    {}
    modifier onlySelf() override {
        _;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
contract TestTransformerBase is
    Transformer
{
    function transform(
        bytes32,
        address payable,
        bytes calldata
    )
        external
        override
        returns (bytes4 success)
    {
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/LibERC20Transformer.sol";
contract TestTransformerDeployerTransformer {
    address payable public immutable deployer;
    constructor() public payable {
        deployer = msg.sender;
    }
    modifier onlyDeployer() {
        require(msg.sender == deployer, "TestTransformerDeployerTransformer/ONLY_DEPLOYER");
        _;
    }
    function die()
        external
        onlyDeployer
    {
        selfdestruct(deployer);
    }
    function isDeployedByDeployer(uint32 nonce)
        external
        view
        returns (bool)
    {
        return LibERC20Transformer.getDeployedAddress(deployer, nonce) == address(this);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./TestMintableERC20Token.sol";
contract TestWeth is
    TestMintableERC20Token
{
    function deposit()
        external
        payable
    {
        this.mint(msg.sender, msg.value);
    }
    function withdraw(uint256 amount)
        external
    {
        require(balanceOf[msg.sender] >= amount, "TestWeth/INSUFFICIENT_FUNDS");
        balanceOf[msg.sender] -= amount;
        msg.sender.transfer(amount);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/IERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
import "./TestTransformerHost.sol";
import "./TestWeth.sol";
contract TestWethTransformerHost is
    TestTransformerHost
{
    // solhint-disable
    TestWeth private immutable _weth;
    // solhint-enable
    constructor(TestWeth weth) public {
        _weth = weth;
    }
    function executeTransform(
        uint256 wethAmount,
        IERC20Transformer transformer,
        bytes calldata data
    )
        external
        payable
    {
        if (wethAmount != 0) {
            _weth.deposit{value: wethAmount}();
        }
        // Have to make this call externally because transformers aren't payable.
        this.rawExecuteTransform(transformer, bytes32(0), msg.sender, data);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/fixins/FixinCommon.sol";
import "../src/ZeroEx.sol";
contract TestZeroExFeature is
    FixinCommon
{
    event PayableFnCalled(uint256 value);
    event NotPayableFnCalled();
    function payableFn()
        external
        payable
    {
        emit PayableFnCalled(msg.value);
    }
    function notPayableFn()
        external
    {
        emit NotPayableFnCalled();
    }
    // solhint-disable no-empty-blocks
    function unimplmentedFn()
        external
    {}
    function internalFn()
        external
        onlySelf
    {}
}

pragma solidity ^0.4.17;

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        assert(c / a == b);
        return c;
    }

    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // assert(b > 0); // Solidity automatically throws when dividing by 0
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }

    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        assert(b <= a);
        return a - b;
    }

    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        assert(c >= a);
        return c;
    }
}

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address public owner;

    /**
      * @dev The Ownable constructor sets the original `owner` of the contract to the sender
      * account.
      */
    function Ownable() public {
        owner = msg.sender;
    }

    /**
      * @dev Throws if called by any account other than the owner.
      */
    modifier onlyOwner() {
        require(msg.sender == owner);
        _;
    }

    /**
    * @dev Allows the current owner to transfer control of the contract to a newOwner.
    * @param newOwner The address to transfer ownership to.
    */
    function transferOwnership(address newOwner) public onlyOwner {
        if (newOwner != address(0)) {
            owner = newOwner;
        }
    }

}

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20Basic {
    uint public _totalSupply;
    function totalSupply() public constant returns (uint);
    function balanceOf(address who) public constant returns (uint);
    function transfer(address to, uint value) public;
    event Transfer(address indexed from, address indexed to, uint value);
}

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
    function allowance(address owner, address spender) public constant returns (uint);
    function transferFrom(address from, address to, uint value) public;
    function approve(address spender, uint value) public;
    event Approval(address indexed owner, address indexed spender, uint value);
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is Ownable, ERC20Basic {
    using SafeMath for uint;

    mapping(address => uint) public balances;

    // additional variables for use if transaction fees ever became necessary
    uint public basisPointsRate = 0;
    uint public maximumFee = 0;

    /**
    * @dev Fix for the ERC20 short address attack.
    */
    modifier onlyPayloadSize(uint size) {
        require(!(msg.data.length < size + 4));
        _;
    }

    /**
    * @dev transfer token for a specified address
    * @param _to The address to transfer to.
    * @param _value The amount to be transferred.
    */
    function transfer(address _to, uint _value) public onlyPayloadSize(2 * 32) {
        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        uint sendAmount = _value.sub(fee);
        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(msg.sender, owner, fee);
        }
        Transfer(msg.sender, _to, sendAmount);
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param _owner The address to query the the balance of.
    * @return An uint representing the amount owned by the passed address.
    */
    function balanceOf(address _owner) public constant returns (uint balance) {
        return balances[_owner];
    }

}

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * @dev https://github.com/ethereum/EIPs/issues/20
 * @dev Based oncode by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is BasicToken, ERC20 {

    mapping (address => mapping (address => uint)) public allowed;

    uint public constant MAX_UINT = 2**256 - 1;

    /**
    * @dev Transfer tokens from one address to another
    * @param _from address The address which you want to send tokens from
    * @param _to address The address which you want to transfer to
    * @param _value uint the amount of tokens to be transferred
    */
    function transferFrom(address _from, address _to, uint _value) public onlyPayloadSize(3 * 32) {
        var _allowance = allowed[_from][msg.sender];

        // Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
        // if (_value > _allowance) throw;

        uint fee = (_value.mul(basisPointsRate)).div(10000);
        if (fee > maximumFee) {
            fee = maximumFee;
        }
        if (_allowance < MAX_UINT) {
            allowed[_from][msg.sender] = _allowance.sub(_value);
        }
        uint sendAmount = _value.sub(fee);
        balances[_from] = balances[_from].sub(_value);
        balances[_to] = balances[_to].add(sendAmount);
        if (fee > 0) {
            balances[owner] = balances[owner].add(fee);
            Transfer(_from, owner, fee);
        }
        Transfer(_from, _to, sendAmount);
    }

    /**
    * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
    * @param _spender The address which will spend the funds.
    * @param _value The amount of tokens to be spent.
    */
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {

        // To change the approve amount you first have to reduce the addresses`
        //  allowance to zero by calling `approve(_spender, 0)` if it is not
        //  already 0 to mitigate the race condition described here:
        //  https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
        require(!((_value != 0) && (allowed[msg.sender][_spender] != 0)));

        allowed[msg.sender][_spender] = _value;
        Approval(msg.sender, _spender, _value);
    }

    /**
    * @dev Function to check the amount of tokens than an owner allowed to a spender.
    * @param _owner address The address which owns the funds.
    * @param _spender address The address which will spend the funds.
    * @return A uint specifying the amount of tokens still available for the spender.
    */
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        return allowed[_owner][_spender];
    }

}


/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() onlyOwner whenNotPaused public {
    paused = true;
    Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() onlyOwner whenPaused public {
    paused = false;
    Unpause();
  }
}

contract BlackList is Ownable, BasicToken {

    /////// Getters to allow the same blacklist to be used also by other contracts (including upgraded Tether) ///////
    function getBlackListStatus(address _maker) external constant returns (bool) {
        return isBlackListed[_maker];
    }

    function getOwner() external constant returns (address) {
        return owner;
    }

    mapping (address => bool) public isBlackListed;
    
    function addBlackList (address _evilUser) public onlyOwner {
        isBlackListed[_evilUser] = true;
        AddedBlackList(_evilUser);
    }

    function removeBlackList (address _clearedUser) public onlyOwner {
        isBlackListed[_clearedUser] = false;
        RemovedBlackList(_clearedUser);
    }

    function destroyBlackFunds (address _blackListedUser) public onlyOwner {
        require(isBlackListed[_blackListedUser]);
        uint dirtyFunds = balanceOf(_blackListedUser);
        balances[_blackListedUser] = 0;
        _totalSupply -= dirtyFunds;
        DestroyedBlackFunds(_blackListedUser, dirtyFunds);
    }

    event DestroyedBlackFunds(address _blackListedUser, uint _balance);

    event AddedBlackList(address _user);

    event RemovedBlackList(address _user);

}

contract UpgradedStandardToken is StandardToken{
    // those methods are called by the legacy contract
    // and they must ensure msg.sender to be the contract address
    function transferByLegacy(address from, address to, uint value) public;
    function transferFromByLegacy(address sender, address from, address spender, uint value) public;
    function approveByLegacy(address from, address spender, uint value) public;
}

contract TetherToken is Pausable, StandardToken, BlackList {

    string public name;
    string public symbol;
    uint public decimals;
    address public upgradedAddress;
    bool public deprecated;

    //  The contract can be initialized with a number of tokens
    //  All the tokens are deposited to the owner address
    //
    // @param _balance Initial supply of the contract
    // @param _name Token Name
    // @param _symbol Token symbol
    // @param _decimals Token decimals
    function TetherToken(uint _initialSupply, string _name, string _symbol, uint _decimals) public {
        _totalSupply = _initialSupply;
        name = _name;
        symbol = _symbol;
        decimals = _decimals;
        balances[owner] = _initialSupply;
        deprecated = false;
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transfer(address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[msg.sender]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferByLegacy(msg.sender, _to, _value);
        } else {
            return super.transfer(_to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function transferFrom(address _from, address _to, uint _value) public whenNotPaused {
        require(!isBlackListed[_from]);
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).transferFromByLegacy(msg.sender, _from, _to, _value);
        } else {
            return super.transferFrom(_from, _to, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function balanceOf(address who) public constant returns (uint) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).balanceOf(who);
        } else {
            return super.balanceOf(who);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function approve(address _spender, uint _value) public onlyPayloadSize(2 * 32) {
        if (deprecated) {
            return UpgradedStandardToken(upgradedAddress).approveByLegacy(msg.sender, _spender, _value);
        } else {
            return super.approve(_spender, _value);
        }
    }

    // Forward ERC20 methods to upgraded contract if this one is deprecated
    function allowance(address _owner, address _spender) public constant returns (uint remaining) {
        if (deprecated) {
            return StandardToken(upgradedAddress).allowance(_owner, _spender);
        } else {
            return super.allowance(_owner, _spender);
        }
    }

    // deprecate current contract in favour of a new one
    function deprecate(address _upgradedAddress) public onlyOwner {
        deprecated = true;
        upgradedAddress = _upgradedAddress;
        Deprecate(_upgradedAddress);
    }

    // deprecate current contract if favour of a new one
    function totalSupply() public constant returns (uint) {
        if (deprecated) {
            return StandardToken(upgradedAddress).totalSupply();
        } else {
            return _totalSupply;
        }
    }

    // Issue a new amount of tokens
    // these tokens are deposited into the owner address
    //
    // @param _amount Number of tokens to be issued
    function issue(uint amount) public onlyOwner {
        require(_totalSupply + amount > _totalSupply);
        require(balances[owner] + amount > balances[owner]);

        balances[owner] += amount;
        _totalSupply += amount;
        Issue(amount);
    }

    // Redeem tokens.
    // These tokens are withdrawn from the owner address
    // if the balance must be enough to cover the redeem
    // or the call will fail.
    // @param _amount Number of tokens to be issued
    function redeem(uint amount) public onlyOwner {
        require(_totalSupply >= amount);
        require(balances[owner] >= amount);

        _totalSupply -= amount;
        balances[owner] -= amount;
        Redeem(amount);
    }

    function setParams(uint newBasisPoints, uint newMaxFee) public onlyOwner {
        // Ensure transparency by hardcoding limit beyond which fees can never be added
        require(newBasisPoints < 20);
        require(newMaxFee < 50);

        basisPointsRate = newBasisPoints;
        maximumFee = newMaxFee.mul(10**decimals);

        Params(basisPointsRate, maximumFee);
    }

    // Called when new token are issued
    event Issue(uint amount);

    // Called when tokens are redeemed
    event Redeem(uint amount);

    // Called when contract is deprecated
    event Deprecate(address newAddress);

    // Called if contract ever adds fees
    event Params(uint feeBasisPoints, uint maxFee);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.25;
import { ERC1967Proxy } from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol";
contract PProxy is ERC1967Proxy {
    constructor(address _logic, bytes memory _data) ERC1967Proxy(_logic, _data) { }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.20;
import {Proxy} from "../Proxy.sol";
import {ERC1967Utils} from "./ERC1967Utils.sol";
/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `implementation`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `implementation`. This will typically be an
     * encoded function call, and allows initializing the storage of the proxy like a Solidity constructor.
     *
     * Requirements:
     *
     * - If `data` is empty, `msg.value` must be zero.
     */
    constructor(address implementation, bytes memory _data) payable {
        ERC1967Utils.upgradeToAndCall(implementation, _data);
    }
    /**
     * @dev Returns the current implementation address.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function _implementation() internal view virtual override returns (address) {
        return ERC1967Utils.getImplementation();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/Proxy.sol)
pragma solidity ^0.8.20;
/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())
            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())
            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }
    /**
     * @dev This is a virtual function that should be overridden so it returns the address to which the fallback
     * function and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);
    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internal call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _delegate(_implementation());
    }
    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Utils.sol)
pragma solidity ^0.8.20;
import {IBeacon} from "../beacon/IBeacon.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 */
library ERC1967Utils {
    // We re-declare ERC-1967 events here because they can't be used directly from IERC1967.
    // This will be fixed in Solidity 0.8.21. At that point we should remove these events.
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);
    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);
    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);
    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();
    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }
        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;
        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }
    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }
    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.20;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);
    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }
    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.
pragma solidity ^0.8.20;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    struct StringSlot {
        string value;
    }
    struct BytesSlot {
        bytes value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}

// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2021 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IEtherTokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "../errors/LibNativeOrdersRichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../fixins/FixinEIP712.sol";
import "../fixins/FixinTokenSpender.sol";
import "../migrations/LibMigrate.sol";
import "../storage/LibNativeOrdersStorage.sol";
import "../storage/LibOtcOrdersStorage.sol";
import "./interfaces/IFeature.sol";
import "./interfaces/IOtcOrdersFeature.sol";
import "./libs/LibNativeOrder.sol";
import "./libs/LibSignature.sol";
/// @dev Feature for interacting with OTC orders.
contract OtcOrdersFeature is
    IFeature,
    IOtcOrdersFeature,
    FixinCommon,
    FixinEIP712,
    FixinTokenSpender
{
    using LibSafeMathV06 for uint256;
    using LibSafeMathV06 for uint128;
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "OtcOrders";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev ETH pseudo-token address.
    address constant private ETH_TOKEN_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    /// @dev The WETH token contract.
    IEtherTokenV06 private immutable WETH;
    constructor(address zeroExAddress, IEtherTokenV06 weth)
        public
        FixinEIP712(zeroExAddress)
    {
        WETH = weth;
    }
    /// @dev Initialize and register this feature.
    ///      Should be delegatecalled by `Migrate.migrate()`.
    /// @return success `LibMigrate.SUCCESS` on success.
    function migrate()
        external
        returns (bytes4 success)
    {
        _registerFeatureFunction(this.fillOtcOrder.selector);
        _registerFeatureFunction(this.fillOtcOrderForEth.selector);
        _registerFeatureFunction(this.fillOtcOrderWithEth.selector);
        _registerFeatureFunction(this.fillTakerSignedOtcOrderForEth.selector);
        _registerFeatureFunction(this.fillTakerSignedOtcOrder.selector);
        _registerFeatureFunction(this.batchFillTakerSignedOtcOrders.selector);
        _registerFeatureFunction(this._fillOtcOrder.selector);
        _registerFeatureFunction(this.getOtcOrderInfo.selector);
        _registerFeatureFunction(this.getOtcOrderHash.selector);
        _registerFeatureFunction(this.lastOtcTxOriginNonce.selector);
        return LibMigrate.MIGRATE_SUCCESS;
    }
    /// @dev Fill an OTC order for up to `takerTokenFillAmount` taker tokens.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function fillOtcOrder(
        LibNativeOrder.OtcOrder memory order,
        LibSignature.Signature memory makerSignature,
        uint128 takerTokenFillAmount
    )
        public
        override
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount)
    {
        LibNativeOrder.OtcOrderInfo memory orderInfo = getOtcOrderInfo(order);
        _validateOtcOrder(
            order, 
            orderInfo,
            makerSignature,
            msg.sender
        );
        (takerTokenFilledAmount, makerTokenFilledAmount) = _settleOtcOrder(
            order,
            takerTokenFillAmount,
            msg.sender,
            msg.sender
        );
        emit OtcOrderFilled(
            orderInfo.orderHash,
            order.maker,
            msg.sender,
            address(order.makerToken),
            address(order.takerToken),
            makerTokenFilledAmount,
            takerTokenFilledAmount
        );
    }
    /// @dev Fill an OTC order for up to `takerTokenFillAmount` taker tokens.
    ///      Unwraps bought WETH into ETH. before sending it to 
    ///      the taker.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function fillOtcOrderForEth(
        LibNativeOrder.OtcOrder memory order,
        LibSignature.Signature memory makerSignature,
        uint128 takerTokenFillAmount
    )
        public
        override
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount)
    {
        require(
            order.makerToken == WETH,
            "OtcOrdersFeature::fillOtcOrderForEth/MAKER_TOKEN_NOT_WETH"
        );
        LibNativeOrder.OtcOrderInfo memory orderInfo = getOtcOrderInfo(order);
        _validateOtcOrder(
            order, 
            orderInfo,
            makerSignature,
            msg.sender
        );
        (takerTokenFilledAmount, makerTokenFilledAmount) = _settleOtcOrder(
            order,
            takerTokenFillAmount, 
            msg.sender,
            address(this)
        );
        // Unwrap WETH
        WETH.withdraw(makerTokenFilledAmount);
        // Transfer ETH to taker
        _transferEth(msg.sender, makerTokenFilledAmount);
        emit OtcOrderFilled(
            orderInfo.orderHash,
            order.maker,
            msg.sender,
            address(order.makerToken),
            address(order.takerToken),
            makerTokenFilledAmount,
            takerTokenFilledAmount
        );
    }
    /// @dev Fill an OTC order whose taker token is WETH for up
    ///      to `msg.value`.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function fillOtcOrderWithEth(
        LibNativeOrder.OtcOrder memory order,
        LibSignature.Signature memory makerSignature
    )
        public
        override
        payable
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount)
    {
        if (order.takerToken == WETH) {
            // Wrap ETH
            WETH.deposit{value: msg.value}();
        } else {
            require(
                address(order.takerToken) == ETH_TOKEN_ADDRESS,
                "OtcOrdersFeature::fillOtcOrderWithEth/INVALID_TAKER_TOKEN"
            );
        }
        LibNativeOrder.OtcOrderInfo memory orderInfo = getOtcOrderInfo(order);
        _validateOtcOrder(
            order, 
            orderInfo,
            makerSignature,
            msg.sender
        );
        (takerTokenFilledAmount, makerTokenFilledAmount) =  _settleOtcOrder(
            order,
            msg.value.safeDowncastToUint128(),
            address(this),
            msg.sender
        );
        if (takerTokenFilledAmount < msg.value) {
            uint256 refundAmount = msg.value - uint256(takerTokenFilledAmount);
            if (order.takerToken == WETH) {
                WETH.withdraw(refundAmount);
            }
            // Refund unused ETH
            _transferEth(msg.sender, refundAmount);
        }
        emit OtcOrderFilled(
            orderInfo.orderHash,
            order.maker,
            msg.sender,
            address(order.makerToken),
            address(order.takerToken),
            makerTokenFilledAmount,
            takerTokenFilledAmount
        );
    }
    /// @dev Fully fill an OTC order. "Meta-transaction" variant,
    ///      requires order to be signed by both maker and taker.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerSignature The order signature from the taker.
    function fillTakerSignedOtcOrder(
        LibNativeOrder.OtcOrder memory order,
        LibSignature.Signature memory makerSignature,
        LibSignature.Signature memory takerSignature
    )
        public
        override
    {
        LibNativeOrder.OtcOrderInfo memory orderInfo = getOtcOrderInfo(order);
        address taker = LibSignature.getSignerOfHash(orderInfo.orderHash, takerSignature);
        
        _validateOtcOrder(
            order, 
            orderInfo,
            makerSignature,
            taker
        );
        _settleOtcOrder(
            order,
            order.takerAmount,
            taker,
            taker
        );
        emit OtcOrderFilled(
            orderInfo.orderHash,
            order.maker,
            taker,
            address(order.makerToken),
            address(order.takerToken),
            order.makerAmount,
            order.takerAmount
        );
    }
    /// @dev Fully fill an OTC order. "Meta-transaction" variant,
    ///      requires order to be signed by both maker and taker.
    ///      Unwraps bought WETH into ETH. before sending it to 
    ///      the taker.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerSignature The order signature from the taker.
    function fillTakerSignedOtcOrderForEth(
        LibNativeOrder.OtcOrder memory order,
        LibSignature.Signature memory makerSignature,
        LibSignature.Signature memory takerSignature
    )
        public
        override
    {
        require(
            order.makerToken == WETH,
            "OtcOrdersFeature::fillTakerSignedOtcOrder/MAKER_TOKEN_NOT_WETH"
        );
        LibNativeOrder.OtcOrderInfo memory orderInfo = getOtcOrderInfo(order);
        address taker = LibSignature.getSignerOfHash(orderInfo.orderHash, takerSignature);
        
        _validateOtcOrder(
            order, 
            orderInfo,
            makerSignature,
            taker
        );
        _settleOtcOrder(
            order,
            order.takerAmount,
            taker,
            address(this)
        );
        // Unwrap WETH
        WETH.withdraw(order.makerAmount);
        // Transfer ETH to taker
        _transferEth(taker, order.makerAmount);
        emit OtcOrderFilled(
            orderInfo.orderHash,
            order.maker,
            taker,
            address(order.makerToken),
            address(order.takerToken),
            order.makerAmount,
            order.takerAmount
        );
    }
    /// @dev Fills multiple taker-signed OTC orders.
    /// @param orders Array of OTC orders.
    /// @param makerSignatures Array of maker signatures for each order.
    /// @param takerSignatures Array of taker signatures for each order.
    /// @param unwrapWeth Array of booleans representing whether or not 
    ///        to unwrap bought WETH into ETH for each order. Should be set 
    ///        to false if the maker token is not WETH.
    /// @return successes Array of booleans representing whether or not
    ///         each order in `orders` was filled successfully.
    function batchFillTakerSignedOtcOrders(
        LibNativeOrder.OtcOrder[] memory orders,
        LibSignature.Signature[] memory makerSignatures,
        LibSignature.Signature[] memory takerSignatures,
        bool[] memory unwrapWeth
    )
        public
        override
        returns (bool[] memory successes)
    {
        require(
            orders.length == makerSignatures.length && 
            orders.length == takerSignatures.length &&
            orders.length == unwrapWeth.length,
            "OtcOrdersFeature::batchFillTakerSignedOtcOrders/MISMATCHED_ARRAY_LENGTHS"
        );
        successes = new bool[](orders.length);
        for (uint256 i = 0; i != orders.length; i++) {
            bytes4 fnSelector = unwrapWeth[i] 
                ? this.fillTakerSignedOtcOrderForEth.selector
                : this.fillTakerSignedOtcOrder.selector;
            // Swallow reverts
            (successes[i], ) = _implementation.delegatecall(
                abi.encodeWithSelector(
                    fnSelector,
                    orders[i],
                    makerSignatures[i],
                    takerSignatures[i]
                )
            );
        }
    }
    /// @dev Fill an OTC order for up to `takerTokenFillAmount` taker tokens.
    ///      Internal variant.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @param taker The address to fill the order in the context of.
    /// @param useSelfBalance Whether to use the Exchange Proxy's balance
    ///        of input tokens.
    /// @param recipient The recipient of the bought maker tokens.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function _fillOtcOrder(
        LibNativeOrder.OtcOrder memory order,
        LibSignature.Signature memory makerSignature,
        uint128 takerTokenFillAmount,
        address taker,
        bool useSelfBalance,
        address recipient
    )
        public
        override
        onlySelf
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount)
    {
        LibNativeOrder.OtcOrderInfo memory orderInfo = getOtcOrderInfo(order);
        _validateOtcOrder(
            order, 
            orderInfo,
            makerSignature,
            taker
        );
        (takerTokenFilledAmount, makerTokenFilledAmount) = _settleOtcOrder(
            order,
            takerTokenFillAmount,
            useSelfBalance ? address(this) : taker,
            recipient
        );
        emit OtcOrderFilled(
            orderInfo.orderHash,
            order.maker,
            taker,
            address(order.makerToken),
            address(order.takerToken),
            makerTokenFilledAmount,
            takerTokenFilledAmount
        );
    }
    /// @dev Validates an OTC order, reverting if the order cannot be 
    ///      filled by the given taker.
    /// @param order The OTC order.
    /// @param orderInfo Info on the order.
    /// @param makerSignature The order signature from the maker.
    /// @param taker The order taker.
    function _validateOtcOrder(
        LibNativeOrder.OtcOrder memory order,
        LibNativeOrder.OtcOrderInfo memory orderInfo,
        LibSignature.Signature memory makerSignature,
        address taker
    )
        private
        view
    {
        // Must be fillable.
        if (orderInfo.status != LibNativeOrder.OrderStatus.FILLABLE) {
            LibNativeOrdersRichErrors.OrderNotFillableError(
                orderInfo.orderHash,
                uint8(orderInfo.status)
            ).rrevert();
        }
        // Must be a valid taker for the order.
        if (order.taker != address(0) && order.taker != taker) {
            LibNativeOrdersRichErrors.OrderNotFillableByTakerError(
                orderInfo.orderHash,
                taker,
                order.taker
            ).rrevert();
        }
        LibNativeOrdersStorage.Storage storage stor =
            LibNativeOrdersStorage.getStorage();
        // Must be fillable by the tx.origin.
        if (
            order.txOrigin != tx.origin &&
            !stor.originRegistry[order.txOrigin][tx.origin]
        ) {
            LibNativeOrdersRichErrors.OrderNotFillableByOriginError(
                orderInfo.orderHash,
                tx.origin,
                order.txOrigin
            ).rrevert();
        }
        // Maker signature must be valid for the order.
        address makerSigner = LibSignature.getSignerOfHash(orderInfo.orderHash, makerSignature);
        if (
            makerSigner != order.maker &&
            !stor.orderSignerRegistry[order.maker][makerSigner]
        ) {
            LibNativeOrdersRichErrors.OrderNotSignedByMakerError(
                orderInfo.orderHash,
                makerSigner,
                order.maker
            ).rrevert();
        }
    }
    /// @dev Settle the trade between an OTC order's maker and taker.
    /// @param order The OTC order.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @param payer The address holding the taker tokens.
    /// @param recipient The recipient of the maker tokens.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function _settleOtcOrder(
        LibNativeOrder.OtcOrder memory order,
        uint128 takerTokenFillAmount,
        address payer,
        address recipient
    )
        private
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount)
    {
        {
            // Unpack nonce fields
            uint64 nonceBucket = uint64(order.expiryAndNonce >> 128);
            uint128 nonce = uint128(order.expiryAndNonce);
            // Update tx origin nonce for the order
            LibOtcOrdersStorage.getStorage().txOriginNonces
                [order.txOrigin][nonceBucket] = nonce;
        }
        if (takerTokenFillAmount == order.takerAmount) {
            takerTokenFilledAmount = order.takerAmount;
            makerTokenFilledAmount = order.makerAmount;
        } else {
            // Clamp the taker token fill amount to the fillable amount.
            takerTokenFilledAmount = LibSafeMathV06.min128(
                takerTokenFillAmount,
                order.takerAmount
            );
            // Compute the maker token amount.
            // This should never overflow because the values are all clamped to
            // (2^128-1).
            makerTokenFilledAmount = uint128(LibMathV06.getPartialAmountFloor(
                uint256(takerTokenFilledAmount),
                uint256(order.takerAmount),
                uint256(order.makerAmount)
            ));
        }
        if (payer == address(this)) {
            if (address(order.takerToken) == ETH_TOKEN_ADDRESS) {
                // Transfer ETH to the maker.
                payable(order.maker).transfer(takerTokenFilledAmount);
            } else {
                // Transfer this -> maker.
                _transferERC20Tokens(
                    order.takerToken,
                    order.maker,
                    takerTokenFilledAmount
                );                
            }
        } else {
            // Transfer taker -> maker
            _transferERC20TokensFrom(
                order.takerToken,
                payer,
                order.maker,
                takerTokenFilledAmount
            );
        }
        // Transfer maker -> recipient.
        _transferERC20TokensFrom(
            order.makerToken,
            order.maker,
            recipient,
            makerTokenFilledAmount
        );
    }
    /// @dev Get the order info for an OTC order.
    /// @param order The OTC order.
    /// @return orderInfo Info about the order.
    function getOtcOrderInfo(LibNativeOrder.OtcOrder memory order)
        public
        override
        view
        returns (LibNativeOrder.OtcOrderInfo memory orderInfo)
    {
        // compute order hash.
        orderInfo.orderHash = getOtcOrderHash(order);
        LibOtcOrdersStorage.Storage storage stor =
            LibOtcOrdersStorage.getStorage();
        // Unpack expiry and nonce fields
        uint64 expiry = uint64(order.expiryAndNonce >> 192);
        uint64 nonceBucket = uint64(order.expiryAndNonce >> 128);
        uint128 nonce = uint128(order.expiryAndNonce);
        // check tx origin nonce
        uint128 lastNonce = stor.txOriginNonces
            [order.txOrigin]
            [nonceBucket];
        if (nonce <= lastNonce) {
            orderInfo.status = LibNativeOrder.OrderStatus.INVALID;
            return orderInfo;
        }
        // Check for expiration.
        if (expiry <= uint64(block.timestamp)) {
            orderInfo.status = LibNativeOrder.OrderStatus.EXPIRED;
            return orderInfo;
        }
        orderInfo.status = LibNativeOrder.OrderStatus.FILLABLE;
        return orderInfo;
    }
    /// @dev Get the canonical hash of an OTC order.
    /// @param order The OTC order.
    /// @return orderHash The order hash.
    function getOtcOrderHash(LibNativeOrder.OtcOrder memory order)
        public
        override
        view
        returns (bytes32 orderHash)
    {
        return _getEIP712Hash(
            LibNativeOrder.getOtcOrderStructHash(order)
        );
    }
    /// @dev Get the last nonce used for a particular
    ///      tx.origin address and nonce bucket.
    /// @param txOrigin The address.
    /// @param nonceBucket The nonce bucket index.
    /// @return lastNonce The last nonce value used.
    function lastOtcTxOriginNonce(address txOrigin, uint64 nonceBucket)
        public
        override
        view
        returns (uint128 lastNonce)
    {
        LibOtcOrdersStorage.Storage storage stor =
            LibOtcOrdersStorage.getStorage();
        return stor.txOriginNonces
            [txOrigin]
            [nonceBucket];
    }
    function _transferEth(address recipient, uint256 amount)
        private
    {
        // Transfer ETH to recipient
        (bool success, bytes memory revertData) =
            recipient.call{value: amount}("");
        // Revert on failure
        if (!success) {
            revertData.rrevert();
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IERC20TokenV06.sol";
interface IEtherTokenV06 is
    IERC20TokenV06
{
    /// @dev Wrap ether.
    function deposit() external payable;
    /// @dev Unwrap ether.
    function withdraw(uint256 amount) external;
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IERC20TokenV06 {
    // solhint-disable no-simple-event-func-name
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    /// @dev send `value` token to `to` from `msg.sender`
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transfer(address to, uint256 value)
        external
        returns (bool);
    /// @dev send `value` token to `to` from `from` on the condition it is approved by `from`
    /// @param from The address of the sender
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        returns (bool);
    /// @dev `msg.sender` approves `spender` to spend `value` tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @param value The amount of wei to be approved for transfer
    /// @return Always true if the call has enough gas to complete execution
    function approve(address spender, uint256 value)
        external
        returns (bool);
    /// @dev Query total supply of token
    /// @return Total supply of token
    function totalSupply()
        external
        view
        returns (uint256);
    /// @dev Get the balance of `owner`.
    /// @param owner The address from which the balance will be retrieved
    /// @return Balance of owner
    function balanceOf(address owner)
        external
        view
        returns (uint256);
    /// @dev Get the allowance for `spender` to spend from `owner`.
    /// @param owner The address of the account owning tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @return Amount of remaining tokens allowed to spent
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);
    /// @dev Get the number of decimals this token has.
    function decimals()
        external
        view
        returns (uint8);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibSafeMathRichErrorsV06.sol";
library LibSafeMathV06 {
    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        if (c / a != b) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.MULTIPLICATION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b == 0) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.DIVISION_BY_ZERO,
                a,
                b
            ));
        }
        uint256 c = a / b;
        return c;
    }
    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b > a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.SUBTRACTION_UNDERFLOW,
                a,
                b
            ));
        }
        return a - b;
    }
    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        if (c < a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.ADDITION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }
    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
    function safeMul128(uint128 a, uint128 b)
        internal
        pure
        returns (uint128)
    {
        if (a == 0) {
            return 0;
        }
        uint128 c = a * b;
        if (c / a != b) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.MULTIPLICATION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function safeDiv128(uint128 a, uint128 b)
        internal
        pure
        returns (uint128)
    {
        if (b == 0) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.DIVISION_BY_ZERO,
                a,
                b
            ));
        }
        uint128 c = a / b;
        return c;
    }
    function safeSub128(uint128 a, uint128 b)
        internal
        pure
        returns (uint128)
    {
        if (b > a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.SUBTRACTION_UNDERFLOW,
                a,
                b
            ));
        }
        return a - b;
    }
    function safeAdd128(uint128 a, uint128 b)
        internal
        pure
        returns (uint128)
    {
        uint128 c = a + b;
        if (c < a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.ADDITION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function max128(uint128 a, uint128 b)
        internal
        pure
        returns (uint128)
    {
        return a >= b ? a : b;
    }
    function min128(uint128 a, uint128 b)
        internal
        pure
        returns (uint128)
    {
        return a < b ? a : b;
    }
    function safeDowncastToUint128(uint256 a)
        internal
        pure
        returns (uint128)
    {
        if (a > type(uint128).max) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256DowncastError(
                LibSafeMathRichErrorsV06.DowncastErrorCodes.VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT128,
                a
            ));
        }
        return uint128(a);
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibRichErrorsV06 {
    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;
    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase
    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSafeMathRichErrorsV06 {
    // bytes4(keccak256("Uint256BinOpError(uint8,uint256,uint256)"))
    bytes4 internal constant UINT256_BINOP_ERROR_SELECTOR =
        0xe946c1bb;
    // bytes4(keccak256("Uint256DowncastError(uint8,uint256)"))
    bytes4 internal constant UINT256_DOWNCAST_ERROR_SELECTOR =
        0xc996af7b;
    enum BinOpErrorCodes {
        ADDITION_OVERFLOW,
        MULTIPLICATION_OVERFLOW,
        SUBTRACTION_UNDERFLOW,
        DIVISION_BY_ZERO
    }
    enum DowncastErrorCodes {
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT32,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT64,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT96,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT128
    }
    // solhint-disable func-name-mixedcase
    function Uint256BinOpError(
        BinOpErrorCodes errorCode,
        uint256 a,
        uint256 b
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_BINOP_ERROR_SELECTOR,
            errorCode,
            a,
            b
        );
    }
    function Uint256DowncastError(
        DowncastErrorCodes errorCode,
        uint256 a
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_DOWNCAST_ERROR_SELECTOR,
            errorCode,
            a
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2019 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./LibSafeMathV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibMathRichErrorsV06.sol";
library LibMathV06 {
    using LibSafeMathV06 for uint256;
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function safeGetPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorFloor(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function safeGetPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorCeil(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function getPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function getPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Checks if rounding error >= 0.1% when rounding down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }
        // The absolute rounding error is the difference between the rounded
        // value and the ideal value. The relative rounding error is the
        // absolute rounding error divided by the absolute value of the
        // ideal value. This is undefined when the ideal value is zero.
        //
        // The ideal value is `numerator * target / denominator`.
        // Let's call `numerator * target % denominator` the remainder.
        // The absolute error is `remainder / denominator`.
        //
        // When the ideal value is zero, we require the absolute error to
        // be zero. Fortunately, this is always the case. The ideal value is
        // zero iff `numerator == 0` and/or `target == 0`. In this case the
        // remainder and absolute error are also zero.
        if (target == 0 || numerator == 0) {
            return false;
        }
        // Otherwise, we want the relative rounding error to be strictly
        // less than 0.1%.
        // The relative error is `remainder / (numerator * target)`.
        // We want the relative error less than 1 / 1000:
        //        remainder / (numerator * denominator)  <  1 / 1000
        // or equivalently:
        //        1000 * remainder  <  numerator * target
        // so we have a rounding error iff:
        //        1000 * remainder  >=  numerator * target
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
    /// @dev Checks if rounding error >= 0.1% when rounding up.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }
        // See the comments in `isRoundingError`.
        if (target == 0 || numerator == 0) {
            // When either is zero, the ideal value and rounded value are zero
            // and there is no rounding error. (Although the relative error
            // is undefined.)
            return false;
        }
        // Compute remainder as before
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        remainder = denominator.safeSub(remainder) % denominator;
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibMathRichErrorsV06 {
    // bytes4(keccak256("DivisionByZeroError()"))
    bytes internal constant DIVISION_BY_ZERO_ERROR =
        hex"a791837c";
    // bytes4(keccak256("RoundingError(uint256,uint256,uint256)"))
    bytes4 internal constant ROUNDING_ERROR_SELECTOR =
        0x339f3de2;
    // solhint-disable func-name-mixedcase
    function DivisionByZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return DIVISION_BY_ZERO_ERROR;
    }
    function RoundingError(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ROUNDING_ERROR_SELECTOR,
            numerator,
            denominator,
            target
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibNativeOrdersRichErrors {
    // solhint-disable func-name-mixedcase
    function ProtocolFeeRefundFailed(
        address receiver,
        uint256 refundAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("ProtocolFeeRefundFailed(address,uint256)")),
            receiver,
            refundAmount
        );
    }
    function OrderNotFillableByOriginError(
        bytes32 orderHash,
        address txOrigin,
        address orderTxOrigin
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OrderNotFillableByOriginError(bytes32,address,address)")),
            orderHash,
            txOrigin,
            orderTxOrigin
        );
    }
    function OrderNotFillableError(
        bytes32 orderHash,
        uint8 orderStatus
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OrderNotFillableError(bytes32,uint8)")),
            orderHash,
            orderStatus
        );
    }
    function OrderNotSignedByMakerError(
        bytes32 orderHash,
        address signer,
        address maker
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OrderNotSignedByMakerError(bytes32,address,address)")),
            orderHash,
            signer,
            maker
        );
    }
    function InvalidSignerError(
        address maker,
        address signer
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidSignerError(address,address)")),
            maker,
            signer
        );
    }
    function OrderNotFillableBySenderError(
        bytes32 orderHash,
        address sender,
        address orderSender
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OrderNotFillableBySenderError(bytes32,address,address)")),
            orderHash,
            sender,
            orderSender
        );
    }
    function OrderNotFillableByTakerError(
        bytes32 orderHash,
        address taker,
        address orderTaker
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OrderNotFillableByTakerError(bytes32,address,address)")),
            orderHash,
            taker,
            orderTaker
        );
    }
    function CancelSaltTooLowError(
        uint256 minValidSalt,
        uint256 oldMinValidSalt
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("CancelSaltTooLowError(uint256,uint256)")),
            minValidSalt,
            oldMinValidSalt
        );
    }
    function FillOrKillFailedError(
        bytes32 orderHash,
        uint256 takerTokenFilledAmount,
        uint256 takerTokenFillAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("FillOrKillFailedError(bytes32,uint256,uint256)")),
            orderHash,
            takerTokenFilledAmount,
            takerTokenFillAmount
        );
    }
    function OnlyOrderMakerAllowed(
        bytes32 orderHash,
        address sender,
        address maker
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyOrderMakerAllowed(bytes32,address,address)")),
            orderHash,
            sender,
            maker
        );
    }
    function BatchFillIncompleteError(
        bytes32 orderHash,
        uint256 takerTokenFilledAmount,
        uint256 takerTokenFillAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("BatchFillIncompleteError(bytes32,uint256,uint256)")),
            orderHash,
            takerTokenFilledAmount,
            takerTokenFillAmount
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibCommonRichErrors.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../features/interfaces/IOwnableFeature.sol";
import "../features/interfaces/ISimpleFunctionRegistryFeature.sol";
/// @dev Common feature utilities.
abstract contract FixinCommon {
    using LibRichErrorsV06 for bytes;
    /// @dev The implementation address of this feature.
    address internal immutable _implementation;
    /// @dev The caller must be this contract.
    modifier onlySelf() virtual {
        if (msg.sender != address(this)) {
            LibCommonRichErrors.OnlyCallableBySelfError(msg.sender).rrevert();
        }
        _;
    }
    /// @dev The caller of this function must be the owner.
    modifier onlyOwner() virtual {
        {
            address owner = IOwnableFeature(address(this)).owner();
            if (msg.sender != owner) {
                LibOwnableRichErrors.OnlyOwnerError(
                    msg.sender,
                    owner
                ).rrevert();
            }
        }
        _;
    }
    constructor() internal {
        // Remember this feature's original address.
        _implementation = address(this);
    }
    /// @dev Registers a function implemented by this feature at `_implementation`.
    ///      Can and should only be called within a `migrate()`.
    /// @param selector The selector of the function whose implementation
    ///        is at `_implementation`.
    function _registerFeatureFunction(bytes4 selector)
        internal
    {
        ISimpleFunctionRegistryFeature(address(this)).extend(selector, _implementation);
    }
    /// @dev Encode a feature version as a `uint256`.
    /// @param major The major version number of the feature.
    /// @param minor The minor version number of the feature.
    /// @param revision The revision number of the feature.
    /// @return encodedVersion The encoded version number.
    function _encodeVersion(uint32 major, uint32 minor, uint32 revision)
        internal
        pure
        returns (uint256 encodedVersion)
    {
        return (uint256(major) << 64) | (uint256(minor) << 32) | uint256(revision);
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibCommonRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyCallableBySelfError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableBySelfError(address)")),
            sender
        );
    }
    function IllegalReentrancyError(bytes4 selector, uint256 reentrancyFlags)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IllegalReentrancyError(bytes4,uint256)")),
            selector,
            reentrancyFlags
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibOwnableRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyOwnerError(address,address)")),
            sender,
            owner
        );
    }
    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransferOwnerToZeroError()"))
        );
    }
    function MigrateCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("MigrateCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";
// solhint-disable no-empty-blocks
/// @dev Owner management and migration features.
interface IOwnableFeature is
    IOwnableV06
{
    /// @dev Emitted when `migrate()` is called.
    /// @param caller The caller of `migrate()`.
    /// @param migrator The migration contract.
    /// @param newOwner The address of the new owner.
    event Migrated(address caller, address migrator, address newOwner);
    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      The owner will be temporarily set to `address(this)` inside the call.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param newOwner The address of the new owner.
    /// @param data The call data.
    function migrate(address target, bytes calldata data, address newOwner) external;
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IOwnableV06 {
    /// @dev Emitted by Ownable when ownership is transferred.
    /// @param previousOwner The previous owner of the contract.
    /// @param newOwner The new owner of the contract.
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /// @dev Transfers ownership of the contract to a new address.
    /// @param newOwner The address that will become the owner.
    function transferOwnership(address newOwner) external;
    /// @dev The owner of this contract.
    /// @return ownerAddress The owner address.
    function owner() external view returns (address ownerAddress);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic registry management features.
interface ISimpleFunctionRegistryFeature {
    /// @dev A function implementation was updated via `extend()` or `rollback()`.
    /// @param selector The function selector.
    /// @param oldImpl The implementation contract address being replaced.
    /// @param newImpl The replacement implementation contract address.
    event ProxyFunctionUpdated(bytes4 indexed selector, address oldImpl, address newImpl);
    /// @dev Roll back to a prior implementation of a function.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl) external;
    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl) external;
    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        view
        returns (uint256 rollbackLength);
    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        view
        returns (address impl);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibCommonRichErrors.sol";
import "../errors/LibOwnableRichErrors.sol";
/// @dev EIP712 helpers for features.
abstract contract FixinEIP712 {
    /// @dev The domain hash separator for the entire exchange proxy.
    bytes32 public immutable EIP712_DOMAIN_SEPARATOR;
    constructor(address zeroExAddress) internal {
        // Compute `EIP712_DOMAIN_SEPARATOR`
        {
            uint256 chainId;
            assembly { chainId := chainid() }
            EIP712_DOMAIN_SEPARATOR = keccak256(
                abi.encode(
                    keccak256(
                        "EIP712Domain("
                            "string name,"
                            "string version,"
                            "uint256 chainId,"
                            "address verifyingContract"
                        ")"
                    ),
                    keccak256("ZeroEx"),
                    keccak256("1.0.0"),
                    chainId,
                    zeroExAddress
                )
            );
        }
    }
    function _getEIP712Hash(bytes32 structHash)
        internal
        view
        returns (bytes32 eip712Hash)
    {
        return keccak256(abi.encodePacked(
            hex"1901",
            EIP712_DOMAIN_SEPARATOR,
            structHash
        ));
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IEtherTokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
/// @dev Helpers for moving tokens around.
abstract contract FixinTokenSpender {
    // Mask of the lower 20 bytes of a bytes32.
    uint256 constant private ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    /// @dev Transfers ERC20 tokens from `owner` to `to`.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _transferERC20TokensFrom(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        internal
    {
        require(address(token) != address(this), "FixinTokenSpender/CANNOT_INVOKE_SELF");
        assembly {
            let ptr := mload(0x40) // free memory pointer
            // selector for transferFrom(address,address,uint256)
            mstore(ptr, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(ptr, 0x04), and(owner, ADDRESS_MASK))
            mstore(add(ptr, 0x24), and(to, ADDRESS_MASK))
            mstore(add(ptr, 0x44), amount)
            let success := call(
                gas(),
                and(token, ADDRESS_MASK),
                0,
                ptr,
                0x64,
                ptr,
                32
            )
            let rdsize := returndatasize()
            // Check for ERC20 success. ERC20 tokens should return a boolean,
            // but some don't. We accept 0-length return data as success, or at
            // least 32 bytes that starts with a 32-byte boolean true.
            success := and(
                success,                             // call itself succeeded
                or(
                    iszero(rdsize),                  // no return data, or
                    and(
                        iszero(lt(rdsize, 32)),      // at least 32 bytes
                        eq(mload(ptr), 1)            // starts with uint256(1)
                    )
                )
            )
            if iszero(success) {
                returndatacopy(ptr, 0, rdsize)
                revert(ptr, rdsize)
            }
        }
    }
    /// @dev Transfers ERC20 tokens from ourselves to `to`.
    /// @param token The token to spend.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _transferERC20Tokens(
        IERC20TokenV06 token,
        address to,
        uint256 amount
    )
        internal
    {
        require(address(token) != address(this), "FixinTokenSpender/CANNOT_INVOKE_SELF");
        assembly {
            let ptr := mload(0x40) // free memory pointer
            // selector for transfer(address,uint256)
            mstore(ptr, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(ptr, 0x04), and(to, ADDRESS_MASK))
            mstore(add(ptr, 0x24), amount)
            let success := call(
                gas(),
                and(token, ADDRESS_MASK),
                0,
                ptr,
                0x44,
                ptr,
                32
            )
            let rdsize := returndatasize()
            // Check for ERC20 success. ERC20 tokens should return a boolean,
            // but some don't. We accept 0-length return data as success, or at
            // least 32 bytes that starts with a 32-byte boolean true.
            success := and(
                success,                             // call itself succeeded
                or(
                    iszero(rdsize),                  // no return data, or
                    and(
                        iszero(lt(rdsize, 32)),      // at least 32 bytes
                        eq(mload(ptr), 1)            // starts with uint256(1)
                    )
                )
            )
            if iszero(success) {
                returndatacopy(ptr, 0, rdsize)
                revert(ptr, rdsize)
            }
        }
    }
    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner` by this address.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function _getSpendableERC20BalanceOf(
        IERC20TokenV06 token,
        address owner
    )
        internal
        view
        returns (uint256)
    {
        return LibSafeMathV06.min256(
            token.allowance(owner, address(this)),
            token.balanceOf(owner)
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibOwnableRichErrors.sol";
library LibMigrate {
    /// @dev Magic bytes returned by a migrator to indicate success.
    ///      This is `keccack('MIGRATE_SUCCESS')`.
    bytes4 internal constant MIGRATE_SUCCESS = 0x2c64c5ef;
    using LibRichErrorsV06 for bytes;
    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallMigrateFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != MIGRATE_SUCCESS)
        {
            LibOwnableRichErrors.MigrateCallFailedError(target, resultData).rrevert();
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for `NativeOrdersFeature`.
library LibNativeOrdersStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // How much taker token has been filled in order.
        // The lower `uint128` is the taker token fill amount.
        // The high bit will be `1` if the order was directly cancelled.
        mapping(bytes32 => uint256) orderHashToTakerTokenFilledAmount;
        // The minimum valid order salt for a given maker and order pair (maker, taker)
        // for limit orders.
        mapping(address => mapping(address => mapping(address => uint256)))
            limitOrdersMakerToMakerTokenToTakerTokenToMinValidOrderSalt;
        // The minimum valid order salt for a given maker and order pair (maker, taker)
        // for RFQ orders.
        mapping(address => mapping(address => mapping(address => uint256)))
            rfqOrdersMakerToMakerTokenToTakerTokenToMinValidOrderSalt;
        // For a given order origin, which tx.origin addresses are allowed to
        // fill the order.
        mapping(address => mapping(address => bool)) originRegistry;
        // For a given maker address, which addresses are allowed to
        // sign on its behalf.
        mapping(address => mapping(address => bool)) orderSignerRegistry;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.NativeOrders
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Common storage helpers
library LibStorage {
    /// @dev What to bit-shift a storage ID by to get its slot.
    ///      This gives us a maximum of 2**128 inline fields in each bucket.
    uint256 private constant STORAGE_SLOT_EXP = 128;
    /// @dev Storage IDs for feature storage buckets.
    ///      WARNING: APPEND-ONLY.
    enum StorageId {
        Proxy,
        SimpleFunctionRegistry,
        Ownable,
        TokenSpender,
        TransformERC20,
        MetaTransactions,
        ReentrancyGuard,
        NativeOrders,
        OtcOrders
    }
    /// @dev Get the storage slot given a storage ID. We assign unique, well-spaced
    ///     slots to storage bucket variables to ensure they do not overlap.
    ///     See: https://solidity.readthedocs.io/en/v0.6.6/assembly.html#access-to-external-variables-functions-and-libraries
    /// @param storageId An entry in `StorageId`
    /// @return slot The storage slot.
    function getStorageSlot(StorageId storageId)
        internal
        pure
        returns (uint256 slot)
    {
        // This should never overflow with a reasonable `STORAGE_SLOT_EXP`
        // because Solidity will do a range check on `storageId` during the cast.
        return (uint256(storageId) + 1) << STORAGE_SLOT_EXP;
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for `OtcOrdersFeature`.
library LibOtcOrdersStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // tx origin => nonce buckets => min nonce
        mapping(address => mapping(uint64 => uint128)) txOriginNonces;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.OtcOrders
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic interface for a feature contract.
interface IFeature {
    // solhint-disable func-name-mixedcase
    /// @dev The name of this feature set.
    function FEATURE_NAME() external view returns (string memory name);
    /// @dev The version of this feature set.
    function FEATURE_VERSION() external view returns (uint256 version);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2021 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../libs/LibNativeOrder.sol";
import "../libs/LibSignature.sol";
/// @dev Feature for interacting with OTC orders.
interface IOtcOrdersFeature {
    /// @dev Emitted whenever an `OtcOrder` is filled.
    /// @param orderHash The canonical hash of the order.
    /// @param maker The maker of the order.
    /// @param taker The taker of the order.
    /// @param makerTokenFilledAmount How much maker token was filled.
    /// @param takerTokenFilledAmount How much taker token was filled.
    event OtcOrderFilled(
        bytes32 orderHash,
        address maker,
        address taker,
        address makerToken,
        address takerToken,
        uint128 makerTokenFilledAmount,
        uint128 takerTokenFilledAmount
    );
    /// @dev Fill an OTC order for up to `takerTokenFillAmount` taker tokens.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function fillOtcOrder(
        LibNativeOrder.OtcOrder calldata order,
        LibSignature.Signature calldata makerSignature,
        uint128 takerTokenFillAmount
    )
        external
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount);
    /// @dev Fill an OTC order for up to `takerTokenFillAmount` taker tokens.
    ///      Unwraps bought WETH into ETH before sending it to 
    ///      the taker.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function fillOtcOrderForEth(
        LibNativeOrder.OtcOrder calldata order,
        LibSignature.Signature calldata makerSignature,
        uint128 takerTokenFillAmount
    )
        external
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount);
    /// @dev Fill an OTC order whose taker token is WETH for up
    ///      to `msg.value`.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function fillOtcOrderWithEth(
        LibNativeOrder.OtcOrder calldata order,
        LibSignature.Signature calldata makerSignature
    )
        external
        payable
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount);
    /// @dev Fully fill an OTC order. "Meta-transaction" variant,
    ///      requires order to be signed by both maker and taker.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerSignature The order signature from the taker.
    function fillTakerSignedOtcOrder(
        LibNativeOrder.OtcOrder calldata order,
        LibSignature.Signature calldata makerSignature,
        LibSignature.Signature calldata takerSignature
    )
        external;
    /// @dev Fully fill an OTC order. "Meta-transaction" variant,
    ///      requires order to be signed by both maker and taker.
    ///      Unwraps bought WETH into ETH before sending it to 
    ///      the taker.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerSignature The order signature from the taker.
    function fillTakerSignedOtcOrderForEth(
        LibNativeOrder.OtcOrder calldata order,
        LibSignature.Signature calldata makerSignature,
        LibSignature.Signature calldata takerSignature
    )
        external;
    /// @dev Fills multiple taker-signed OTC orders.
    /// @param orders Array of OTC orders.
    /// @param makerSignatures Array of maker signatures for each order.
    /// @param takerSignatures Array of taker signatures for each order.
    /// @param unwrapWeth Array of booleans representing whether or not 
    ///        to unwrap bought WETH into ETH for each order. Should be set 
    ///        to false if the maker token is not WETH.
    /// @return successes Array of booleans representing whether or not
    ///         each order in `orders` was filled successfully.
    function batchFillTakerSignedOtcOrders(
        LibNativeOrder.OtcOrder[] calldata orders,
        LibSignature.Signature[] calldata makerSignatures,
        LibSignature.Signature[] calldata takerSignatures,
        bool[] calldata unwrapWeth
    )
        external
        returns (bool[] memory successes);
    /// @dev Fill an OTC order for up to `takerTokenFillAmount` taker tokens.
    ///      Internal variant.
    /// @param order The OTC order.
    /// @param makerSignature The order signature from the maker.
    /// @param takerTokenFillAmount Maximum taker token amount to fill this
    ///        order with.
    /// @param taker The address to fill the order in the context of.
    /// @param useSelfBalance Whether to use the Exchange Proxy's balance
    ///        of input tokens.
    /// @param recipient The recipient of the bought maker tokens.
    /// @return takerTokenFilledAmount How much taker token was filled.
    /// @return makerTokenFilledAmount How much maker token was filled.
    function _fillOtcOrder(
        LibNativeOrder.OtcOrder calldata order,
        LibSignature.Signature calldata makerSignature,
        uint128 takerTokenFillAmount,
        address taker,
        bool useSelfBalance,
        address recipient
    )
        external
        returns (uint128 takerTokenFilledAmount, uint128 makerTokenFilledAmount);
    /// @dev Get the order info for an OTC order.
    /// @param order The OTC order.
    /// @return orderInfo Info about the order.
    function getOtcOrderInfo(LibNativeOrder.OtcOrder calldata order)
        external
        view
        returns (LibNativeOrder.OtcOrderInfo memory orderInfo);
    /// @dev Get the canonical hash of an OTC order.
    /// @param order The OTC order.
    /// @return orderHash The order hash.
    function getOtcOrderHash(LibNativeOrder.OtcOrder calldata order)
        external
        view
        returns (bytes32 orderHash);
    /// @dev Get the last nonce used for a particular
    ///      tx.origin address and nonce bucket.
    /// @param txOrigin The address.
    /// @param nonceBucket The nonce bucket index.
    /// @return lastNonce The last nonce value used.
    function lastOtcTxOriginNonce(address txOrigin, uint64 nonceBucket)
        external
        view
        returns (uint128 lastNonce);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../../errors/LibNativeOrdersRichErrors.sol";
/// @dev A library for common native order operations.
library LibNativeOrder {
    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;
    enum OrderStatus {
        INVALID,
        FILLABLE,
        FILLED,
        CANCELLED,
        EXPIRED
    }
    /// @dev A standard OTC or OO limit order.
    struct LimitOrder {
        IERC20TokenV06 makerToken;
        IERC20TokenV06 takerToken;
        uint128 makerAmount;
        uint128 takerAmount;
        uint128 takerTokenFeeAmount;
        address maker;
        address taker;
        address sender;
        address feeRecipient;
        bytes32 pool;
        uint64 expiry;
        uint256 salt;
    }
    /// @dev An RFQ limit order.
    struct RfqOrder {
        IERC20TokenV06 makerToken;
        IERC20TokenV06 takerToken;
        uint128 makerAmount;
        uint128 takerAmount;
        address maker;
        address taker;
        address txOrigin;
        bytes32 pool;
        uint64 expiry;
        uint256 salt;
    }
    /// @dev An OTC limit order.
    struct OtcOrder {
        IERC20TokenV06 makerToken;
        IERC20TokenV06 takerToken;
        uint128 makerAmount;
        uint128 takerAmount;
        address maker;
        address taker;
        address txOrigin;
        uint256 expiryAndNonce; // [uint64 expiry, uint64 nonceBucket, uint128 nonce]
    }
    /// @dev Info on a limit or RFQ order.
    struct OrderInfo {
        bytes32 orderHash;
        OrderStatus status;
        uint128 takerTokenFilledAmount;
    }
    /// @dev Info on an OTC order.
    struct OtcOrderInfo {
        bytes32 orderHash;
        OrderStatus status;
    }
    uint256 private constant UINT_128_MASK = (1 << 128) - 1;
    uint256 private constant UINT_64_MASK = (1 << 64) - 1;
    uint256 private constant ADDRESS_MASK = (1 << 160) - 1;
    // The type hash for limit orders, which is:
    // keccak256(abi.encodePacked(
    //     "LimitOrder(",
    //       "address makerToken,",
    //       "address takerToken,",
    //       "uint128 makerAmount,",
    //       "uint128 takerAmount,",
    //       "uint128 takerTokenFeeAmount,",
    //       "address maker,",
    //       "address taker,",
    //       "address sender,",
    //       "address feeRecipient,",
    //       "bytes32 pool,",
    //       "uint64 expiry,",
    //       "uint256 salt"
    //     ")"
    // ))
    uint256 private constant _LIMIT_ORDER_TYPEHASH =
        0xce918627cb55462ddbb85e73de69a8b322f2bc88f4507c52fcad6d4c33c29d49;
    // The type hash for RFQ orders, which is:
    // keccak256(abi.encodePacked(
    //     "RfqOrder(",
    //       "address makerToken,",
    //       "address takerToken,",
    //       "uint128 makerAmount,",
    //       "uint128 takerAmount,",
    //       "address maker,",
    //       "address taker,",
    //       "address txOrigin,",
    //       "bytes32 pool,",
    //       "uint64 expiry,",
    //       "uint256 salt"
    //     ")"
    // ))
    uint256 private constant _RFQ_ORDER_TYPEHASH =
        0xe593d3fdfa8b60e5e17a1b2204662ecbe15c23f2084b9ad5bae40359540a7da9;
    // The type hash for OTC orders, which is:
    // keccak256(abi.encodePacked(
    //     "OtcOrder(",
    //       "address makerToken,",
    //       "address takerToken,",
    //       "uint128 makerAmount,",
    //       "uint128 takerAmount,",
    //       "address maker,",
    //       "address taker,",
    //       "address txOrigin,",
    //       "uint256 expiryAndNonce"
    //     ")"
    // ))
    uint256 private constant _OTC_ORDER_TYPEHASH =
        0x2f754524de756ae72459efbe1ec88c19a745639821de528ac3fb88f9e65e35c8;
    /// @dev Get the struct hash of a limit order.
    /// @param order The limit order.
    /// @return structHash The struct hash of the order.
    function getLimitOrderStructHash(LimitOrder memory order)
        internal
        pure
        returns (bytes32 structHash)
    {
        // The struct hash is:
        // keccak256(abi.encode(
        //   TYPE_HASH,
        //   order.makerToken,
        //   order.takerToken,
        //   order.makerAmount,
        //   order.takerAmount,
        //   order.takerTokenFeeAmount,
        //   order.maker,
        //   order.taker,
        //   order.sender,
        //   order.feeRecipient,
        //   order.pool,
        //   order.expiry,
        //   order.salt,
        // ))
        assembly {
            let mem := mload(0x40)
            mstore(mem, _LIMIT_ORDER_TYPEHASH)
            // order.makerToken;
            mstore(add(mem, 0x20), and(ADDRESS_MASK, mload(order)))
            // order.takerToken;
            mstore(add(mem, 0x40), and(ADDRESS_MASK, mload(add(order, 0x20))))
            // order.makerAmount;
            mstore(add(mem, 0x60), and(UINT_128_MASK, mload(add(order, 0x40))))
            // order.takerAmount;
            mstore(add(mem, 0x80), and(UINT_128_MASK, mload(add(order, 0x60))))
            // order.takerTokenFeeAmount;
            mstore(add(mem, 0xA0), and(UINT_128_MASK, mload(add(order, 0x80))))
            // order.maker;
            mstore(add(mem, 0xC0), and(ADDRESS_MASK, mload(add(order, 0xA0))))
            // order.taker;
            mstore(add(mem, 0xE0), and(ADDRESS_MASK, mload(add(order, 0xC0))))
            // order.sender;
            mstore(add(mem, 0x100), and(ADDRESS_MASK, mload(add(order, 0xE0))))
            // order.feeRecipient;
            mstore(add(mem, 0x120), and(ADDRESS_MASK, mload(add(order, 0x100))))
            // order.pool;
            mstore(add(mem, 0x140), mload(add(order, 0x120)))
            // order.expiry;
            mstore(add(mem, 0x160), and(UINT_64_MASK, mload(add(order, 0x140))))
            // order.salt;
            mstore(add(mem, 0x180), mload(add(order, 0x160)))
            structHash := keccak256(mem, 0x1A0)
        }
    }
    /// @dev Get the struct hash of a RFQ order.
    /// @param order The RFQ order.
    /// @return structHash The struct hash of the order.
    function getRfqOrderStructHash(RfqOrder memory order)
        internal
        pure
        returns (bytes32 structHash)
    {
        // The struct hash is:
        // keccak256(abi.encode(
        //   TYPE_HASH,
        //   order.makerToken,
        //   order.takerToken,
        //   order.makerAmount,
        //   order.takerAmount,
        //   order.maker,
        //   order.taker,
        //   order.txOrigin,
        //   order.pool,
        //   order.expiry,
        //   order.salt,
        // ))
        assembly {
            let mem := mload(0x40)
            mstore(mem, _RFQ_ORDER_TYPEHASH)
            // order.makerToken;
            mstore(add(mem, 0x20), and(ADDRESS_MASK, mload(order)))
            // order.takerToken;
            mstore(add(mem, 0x40), and(ADDRESS_MASK, mload(add(order, 0x20))))
            // order.makerAmount;
            mstore(add(mem, 0x60), and(UINT_128_MASK, mload(add(order, 0x40))))
            // order.takerAmount;
            mstore(add(mem, 0x80), and(UINT_128_MASK, mload(add(order, 0x60))))
            // order.maker;
            mstore(add(mem, 0xA0), and(ADDRESS_MASK, mload(add(order, 0x80))))
            // order.taker;
            mstore(add(mem, 0xC0), and(ADDRESS_MASK, mload(add(order, 0xA0))))
            // order.txOrigin;
            mstore(add(mem, 0xE0), and(ADDRESS_MASK, mload(add(order, 0xC0))))
            // order.pool;
            mstore(add(mem, 0x100), mload(add(order, 0xE0)))
            // order.expiry;
            mstore(add(mem, 0x120), and(UINT_64_MASK, mload(add(order, 0x100))))
            // order.salt;
            mstore(add(mem, 0x140), mload(add(order, 0x120)))
            structHash := keccak256(mem, 0x160)
        }
    }
    /// @dev Get the struct hash of an OTC order.
    /// @param order The OTC order.
    /// @return structHash The struct hash of the order.
    function getOtcOrderStructHash(OtcOrder memory order)
        internal
        pure
        returns (bytes32 structHash)
    {
        // The struct hash is:
        // keccak256(abi.encode(
        //   TYPE_HASH,
        //   order.makerToken,
        //   order.takerToken,
        //   order.makerAmount,
        //   order.takerAmount,
        //   order.maker,
        //   order.taker,
        //   order.txOrigin,
        //   order.expiryAndNonce,
        // ))
        assembly {
            let mem := mload(0x40)
            mstore(mem, _OTC_ORDER_TYPEHASH)
            // order.makerToken;
            mstore(add(mem, 0x20), and(ADDRESS_MASK, mload(order)))
            // order.takerToken;
            mstore(add(mem, 0x40), and(ADDRESS_MASK, mload(add(order, 0x20))))
            // order.makerAmount;
            mstore(add(mem, 0x60), and(UINT_128_MASK, mload(add(order, 0x40))))
            // order.takerAmount;
            mstore(add(mem, 0x80), and(UINT_128_MASK, mload(add(order, 0x60))))
            // order.maker;
            mstore(add(mem, 0xA0), and(ADDRESS_MASK, mload(add(order, 0x80))))
            // order.taker;
            mstore(add(mem, 0xC0), and(ADDRESS_MASK, mload(add(order, 0xA0))))
            // order.txOrigin;
            mstore(add(mem, 0xE0), and(ADDRESS_MASK, mload(add(order, 0xC0))))
            // order.expiryAndNonce;
            mstore(add(mem, 0x100), mload(add(order, 0xE0)))
            structHash := keccak256(mem, 0x120)
        }
    }
    /// @dev Refund any leftover protocol fees in `msg.value` to `msg.sender`.
    /// @param ethProtocolFeePaid How much ETH was paid in protocol fees.
    function refundExcessProtocolFeeToSender(uint256 ethProtocolFeePaid)
        internal
    {
        if (msg.value > ethProtocolFeePaid && msg.sender != address(this)) {
            uint256 refundAmount = msg.value.safeSub(ethProtocolFeePaid);
            (bool success,) = msg
                .sender
                .call{value: refundAmount}("");
            if (!success) {
                LibNativeOrdersRichErrors.ProtocolFeeRefundFailed(
                    msg.sender,
                    refundAmount
                ).rrevert();
            }
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../../errors/LibSignatureRichErrors.sol";
/// @dev A library for validating signatures.
library LibSignature {
    using LibRichErrorsV06 for bytes;
    // '\\x19Ethereum Signed Message:\
32\\x00\\x00\\x00\\x00' in a word.
    uint256 private constant ETH_SIGN_HASH_PREFIX =
        0x19457468657265756d205369676e6564204d6573736167653a0a333200000000;
    /// @dev Exclusive upper limit on ECDSA signatures 'R' values.
    ///      The valid range is given by fig (282) of the yellow paper.
    uint256 private constant ECDSA_SIGNATURE_R_LIMIT =
        uint256(0xfffffffffffffffffffffffffffffffebaaedce6af48a03bbfd25e8cd0364141);
    /// @dev Exclusive upper limit on ECDSA signatures 'S' values.
    ///      The valid range is given by fig (283) of the yellow paper.
    uint256 private constant ECDSA_SIGNATURE_S_LIMIT = ECDSA_SIGNATURE_R_LIMIT / 2 + 1;
    /// @dev Allowed signature types.
    enum SignatureType {
        ILLEGAL,
        INVALID,
        EIP712,
        ETHSIGN
    }
    /// @dev Encoded EC signature.
    struct Signature {
        // How to validate the signature.
        SignatureType signatureType;
        // EC Signature data.
        uint8 v;
        // EC Signature data.
        bytes32 r;
        // EC Signature data.
        bytes32 s;
    }
    /// @dev Retrieve the signer of a signature.
    ///      Throws if the signature can't be validated.
    /// @param hash The hash that was signed.
    /// @param signature The signature.
    /// @return recovered The recovered signer address.
    function getSignerOfHash(
        bytes32 hash,
        Signature memory signature
    )
        internal
        pure
        returns (address recovered)
    {
        // Ensure this is a signature type that can be validated against a hash.
        _validateHashCompatibleSignature(hash, signature);
        if (signature.signatureType == SignatureType.EIP712) {
            // Signed using EIP712
            recovered = ecrecover(
                hash,
                signature.v,
                signature.r,
                signature.s
            );
        } else if (signature.signatureType == SignatureType.ETHSIGN) {
            // Signed using `eth_sign`
            // Need to hash `hash` with "\\x19Ethereum Signed Message:\
32" prefix
            // in packed encoding.
            bytes32 ethSignHash;
            assembly {
                // Use scratch space
                mstore(0, ETH_SIGN_HASH_PREFIX) // length of 28 bytes
                mstore(28, hash) // length of 32 bytes
                ethSignHash := keccak256(0, 60)
            }
            recovered = ecrecover(
                ethSignHash,
                signature.v,
                signature.r,
                signature.s
            );
        }
        // `recovered` can be null if the signature values are out of range.
        if (recovered == address(0)) {
            LibSignatureRichErrors.SignatureValidationError(
                LibSignatureRichErrors.SignatureValidationErrorCodes.BAD_SIGNATURE_DATA,
                hash
            ).rrevert();
        }
    }
    /// @dev Validates that a signature is compatible with a hash signee.
    /// @param hash The hash that was signed.
    /// @param signature The signature.
    function _validateHashCompatibleSignature(
        bytes32 hash,
        Signature memory signature
    )
        private
        pure
    {
        // Ensure the r and s are within malleability limits.
        if (uint256(signature.r) >= ECDSA_SIGNATURE_R_LIMIT ||
            uint256(signature.s) >= ECDSA_SIGNATURE_S_LIMIT)
        {
            LibSignatureRichErrors.SignatureValidationError(
                LibSignatureRichErrors.SignatureValidationErrorCodes.BAD_SIGNATURE_DATA,
                hash
            ).rrevert();
        }
        // Always illegal signature.
        if (signature.signatureType == SignatureType.ILLEGAL) {
            LibSignatureRichErrors.SignatureValidationError(
                LibSignatureRichErrors.SignatureValidationErrorCodes.ILLEGAL,
                hash
            ).rrevert();
        }
        // Always invalid.
        if (signature.signatureType == SignatureType.INVALID) {
            LibSignatureRichErrors.SignatureValidationError(
                LibSignatureRichErrors.SignatureValidationErrorCodes.ALWAYS_INVALID,
                hash
            ).rrevert();
        }
        // Solidity should check that the signature type is within enum range for us
        // when abi-decoding.
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSignatureRichErrors {
    enum SignatureValidationErrorCodes {
        ALWAYS_INVALID,
        INVALID_LENGTH,
        UNSUPPORTED,
        ILLEGAL,
        WRONG_SIGNER,
        BAD_SIGNATURE_DATA
    }
    // solhint-disable func-name-mixedcase
    function SignatureValidationError(
        SignatureValidationErrorCodes code,
        bytes32 hash,
        address signerAddress,
        bytes memory signature
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("SignatureValidationError(uint8,bytes32,address,bytes)")),
            code,
            hash,
            signerAddress,
            signature
        );
    }
    function SignatureValidationError(
        SignatureValidationErrorCodes code,
        bytes32 hash
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("SignatureValidationError(uint8,bytes32)")),
            code,
            hash
        );
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.25;
import { AccessControlUpgradeable } from "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";
import { Initializable } from "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import { UUPSUpgradeable } from "@openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol";
import { ERC20Upgradeable } from "@openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol";
import { ERC20BurnableUpgradeable } from
    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol";
import { ERC20PausableUpgradeable } from
    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PausableUpgradeable.sol";
import { ERC20PermitUpgradeable } from
    "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PermitUpgradeable.sol";
/**
 * @title Plume
 * @author Eugene Y. Q. Shen
 * @notice ERC20 token that is the governance token for Plume Network
 */
contract Plume is
    Initializable,
    ERC20Upgradeable,
    ERC20BurnableUpgradeable,
    ERC20PausableUpgradeable,
    AccessControlUpgradeable,
    ERC20PermitUpgradeable,
    UUPSUpgradeable
{
    // Constants
    /// @notice Role for the upgrader of Plume
    bytes32 public constant UPGRADER_ROLE = keccak256("UPGRADER_ROLE");
    /// @notice Role for the minter of Plume
    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    /// @notice Role for the burner of Plume
    bytes32 public constant BURNER_ROLE = keccak256("BURNER_ROLE");
    /// @notice Role for the pauser of Plume
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
    // Initializer
    /**
     * @notice Prevent the implementation contract from being initialized or reinitialized
     * @custom:oz-upgrades-unsafe-allow constructor
     */
    constructor() {
        _disableInitializers();
    }
    /**
     * @notice Initialize Plume
     * @dev Give all roles to the admin address passed into the constructor
     * @param owner Address of the owner of Plume
     */
    function initialize(
        address owner
    ) public initializer {
        __ERC20_init("Plume", "PLUME");
        __ERC20Burnable_init();
        __ERC20Pausable_init();
        __AccessControl_init();
        __ERC20Permit_init("Plume");
        __UUPSUpgradeable_init();
        _grantRole(DEFAULT_ADMIN_ROLE, owner);
        _grantRole(MINTER_ROLE, owner);
        _grantRole(BURNER_ROLE, owner);
        _grantRole(PAUSER_ROLE, owner);
        _grantRole(UPGRADER_ROLE, owner);
    }
    /// @notice Reinitialize Plume with symbol $PLUME
    function reinitialize() public reinitializer(2) onlyRole(UPGRADER_ROLE) {
        __ERC20_init("Plume", "PLUME");
    }
    // Override Functions
    /**
     * @notice Revert when `msg.sender` is not authorized to upgrade the contract
     * @param newImplementation Address of the new implementation
     */
    function _authorizeUpgrade(
        address newImplementation
    ) internal override onlyRole(UPGRADER_ROLE) { }
    /**
     * @notice Update the balance of `from` and `to` after token transfer
     * @param from Address to transfer tokens from
     * @param to Address to transfer tokens to
     * @param value Amount of tokens to transfer
     */
    function _update(
        address from,
        address to,
        uint256 value
    ) internal override(ERC20Upgradeable, ERC20PausableUpgradeable) {
        super._update(from, to, value);
    }
    // User Functions
    /**
     * @notice Mint new Plume tokens
     * @dev Only the minter can mint new tokens
     * @param to Address to mint tokens to
     * @param amount Amount of tokens to mint
     */
    function mint(address to, uint256 amount) external onlyRole(MINTER_ROLE) {
        _mint(to, amount);
    }
    /**
     * @notice Burn Plume tokens
     * @dev Only the burner can burn tokens
     * @param from Address to burn tokens from
     * @param amount Amount of tokens to burn
     */
    function burn(address from, uint256 amount) external onlyRole(BURNER_ROLE) {
        _burn(from, amount);
    }
    /**
     * @notice Pause the contract
     * @dev Only the pauser can pause the contract
     */
    function pause() external onlyRole(PAUSER_ROLE) {
        _pause();
    }
    /**
     * @notice Unpause the contract
     * @dev Only the pauser can unpause the contract
     */
    function unpause() external onlyRole(PAUSER_ROLE) {
        _unpause();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)
pragma solidity ^0.8.20;
import {IAccessControl} from "@openzeppelin/contracts/access/IAccessControl.sol";
import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {ERC165Upgradeable} from "../utils/introspection/ERC165Upgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControl, ERC165Upgradeable {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }
    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
    /// @custom:storage-location erc7201:openzeppelin.storage.AccessControl
    struct AccessControlStorage {
        mapping(bytes32 role => RoleData) _roles;
    }
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.AccessControl")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant AccessControlStorageLocation = 0x02dd7bc7dec4dceedda775e58dd541e08a116c6c53815c0bd028192f7b626800;
    function _getAccessControlStorage() private pure returns (AccessControlStorage storage $) {
        assembly {
            $.slot := AccessControlStorageLocation
        }
    }
    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }
    function __AccessControl_init() internal onlyInitializing {
    }
    function __AccessControl_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }
    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].hasRole[account];
    }
    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }
    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }
    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        return $._roles[role].adminRole;
    }
    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }
    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }
    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }
        _revokeRole(role, callerConfirmation);
    }
    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        AccessControlStorage storage $ = _getAccessControlStorage();
        bytes32 previousAdminRole = getRoleAdmin(role);
        $._roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }
    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (!hasRole(role, account)) {
            $._roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        AccessControlStorage storage $ = _getAccessControlStorage();
        if (hasRole(role, account)) {
            $._roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.20;
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;
    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();
    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();
        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;
        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;
        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();
        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }
    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();
        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }
    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }
    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }
    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/UUPSUpgradeable.sol)
pragma solidity ^0.8.20;
import {IERC1822Proxiable} from "@openzeppelin/contracts/interfaces/draft-IERC1822.sol";
import {ERC1967Utils} from "@openzeppelin/contracts/proxy/ERC1967/ERC1967Utils.sol";
import {Initializable} from "./Initializable.sol";
/**
 * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an
 * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.
 *
 * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is
 * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing
 * `UUPSUpgradeable` with a custom implementation of upgrades.
 *
 * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.
 */
abstract contract UUPSUpgradeable is Initializable, IERC1822Proxiable {
    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
    address private immutable __self = address(this);
    /**
     * @dev The version of the upgrade interface of the contract. If this getter is missing, both `upgradeTo(address)`
     * and `upgradeToAndCall(address,bytes)` are present, and `upgradeTo` must be used if no function should be called,
     * while `upgradeToAndCall` will invoke the `receive` function if the second argument is the empty byte string.
     * If the getter returns `"5.0.0"`, only `upgradeToAndCall(address,bytes)` is present, and the second argument must
     * be the empty byte string if no function should be called, making it impossible to invoke the `receive` function
     * during an upgrade.
     */
    string public constant UPGRADE_INTERFACE_VERSION = "5.0.0";
    /**
     * @dev The call is from an unauthorized context.
     */
    error UUPSUnauthorizedCallContext();
    /**
     * @dev The storage `slot` is unsupported as a UUID.
     */
    error UUPSUnsupportedProxiableUUID(bytes32 slot);
    /**
     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is
     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case
     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a
     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to
     * fail.
     */
    modifier onlyProxy() {
        _checkProxy();
        _;
    }
    /**
     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be
     * callable on the implementing contract but not through proxies.
     */
    modifier notDelegated() {
        _checkNotDelegated();
        _;
    }
    function __UUPSUpgradeable_init() internal onlyInitializing {
    }
    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the
     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.
     */
    function proxiableUUID() external view virtual notDelegated returns (bytes32) {
        return ERC1967Utils.IMPLEMENTATION_SLOT;
    }
    /**
     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call
     * encoded in `data`.
     *
     * Calls {_authorizeUpgrade}.
     *
     * Emits an {Upgraded} event.
     *
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {
        _authorizeUpgrade(newImplementation);
        _upgradeToAndCallUUPS(newImplementation, data);
    }
    /**
     * @dev Reverts if the execution is not performed via delegatecall or the execution
     * context is not of a proxy with an ERC1967-compliant implementation pointing to self.
     * See {_onlyProxy}.
     */
    function _checkProxy() internal view virtual {
        if (
            address(this) == __self || // Must be called through delegatecall
            ERC1967Utils.getImplementation() != __self // Must be called through an active proxy
        ) {
            revert UUPSUnauthorizedCallContext();
        }
    }
    /**
     * @dev Reverts if the execution is performed via delegatecall.
     * See {notDelegated}.
     */
    function _checkNotDelegated() internal view virtual {
        if (address(this) != __self) {
            // Must not be called through delegatecall
            revert UUPSUnauthorizedCallContext();
        }
    }
    /**
     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by
     * {upgradeToAndCall}.
     *
     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.
     *
     * ```solidity
     * function _authorizeUpgrade(address) internal onlyOwner {}
     * ```
     */
    function _authorizeUpgrade(address newImplementation) internal virtual;
    /**
     * @dev Performs an implementation upgrade with a security check for UUPS proxies, and additional setup call.
     *
     * As a security check, {proxiableUUID} is invoked in the new implementation, and the return value
     * is expected to be the implementation slot in ERC1967.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data) private {
        try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
            if (slot != ERC1967Utils.IMPLEMENTATION_SLOT) {
                revert UUPSUnsupportedProxiableUUID(slot);
            }
            ERC1967Utils.upgradeToAndCall(newImplementation, data);
        } catch {
            // The implementation is not UUPS
            revert ERC1967Utils.ERC1967InvalidImplementation(newImplementation);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.20;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {ContextUpgradeable} from "../../utils/ContextUpgradeable.sol";
import {IERC20Errors} from "@openzeppelin/contracts/interfaces/draft-IERC6093.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20, IERC20Metadata, IERC20Errors {
    /// @custom:storage-location erc7201:openzeppelin.storage.ERC20
    struct ERC20Storage {
        mapping(address account => uint256) _balances;
        mapping(address account => mapping(address spender => uint256)) _allowances;
        uint256 _totalSupply;
        string _name;
        string _symbol;
    }
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.ERC20")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant ERC20StorageLocation = 0x52c63247e1f47db19d5ce0460030c497f067ca4cebf71ba98eeadabe20bace00;
    function _getERC20Storage() private pure returns (ERC20Storage storage $) {
        assembly {
            $.slot := ERC20StorageLocation
        }
    }
    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
        __ERC20_init_unchained(name_, symbol_);
    }
    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
        ERC20Storage storage $ = _getERC20Storage();
        $._name = name_;
        $._symbol = symbol_;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        ERC20Storage storage $ = _getERC20Storage();
        return $._allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }
    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            $._totalSupply += value;
        } else {
            uint256 fromBalance = $._balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                $._balances[from] = fromBalance - value;
            }
        }
        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                $._totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                $._balances[to] += value;
            }
        }
        emit Transfer(from, to, value);
    }
    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }
    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }
    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }
    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        ERC20Storage storage $ = _getERC20Storage();
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        $._allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }
    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Burnable.sol)
pragma solidity ^0.8.20;
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ContextUpgradeable} from "../../../utils/ContextUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";
/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
    function __ERC20Burnable_init() internal onlyInitializing {
    }
    function __ERC20Burnable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Destroys a `value` amount of tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 value) public virtual {
        _burn(_msgSender(), value);
    }
    /**
     * @dev Destroys a `value` amount of tokens from `account`, deducting from
     * the caller's allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `value`.
     */
    function burnFrom(address account, uint256 value) public virtual {
        _spendAllowance(account, _msgSender(), value);
        _burn(account, value);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Pausable.sol)
pragma solidity ^0.8.20;
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {PausableUpgradeable} from "../../../utils/PausableUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";
/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 *
 * IMPORTANT: This contract does not include public pause and unpause functions. In
 * addition to inheriting this contract, you must define both functions, invoking the
 * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
 * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
 * make the contract pause mechanism of the contract unreachable, and thus unusable.
 */
abstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {
    function __ERC20Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }
    function __ERC20Pausable_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {ERC20-_update}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _update(address from, address to, uint256 value) internal virtual override whenNotPaused {
        super._update(from, to, value);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC20Permit.sol)
pragma solidity ^0.8.20;
import {IERC20Permit} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {ERC20Upgradeable} from "../ERC20Upgradeable.sol";
import {ECDSA} from "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import {EIP712Upgradeable} from "../../../utils/cryptography/EIP712Upgradeable.sol";
import {NoncesUpgradeable} from "../../../utils/NoncesUpgradeable.sol";
import {Initializable} from "../../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
abstract contract ERC20PermitUpgradeable is Initializable, ERC20Upgradeable, IERC20Permit, EIP712Upgradeable, NoncesUpgradeable {
    bytes32 private constant PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev Permit deadline has expired.
     */
    error ERC2612ExpiredSignature(uint256 deadline);
    /**
     * @dev Mismatched signature.
     */
    error ERC2612InvalidSigner(address signer, address owner);
    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    function __ERC20Permit_init(string memory name) internal onlyInitializing {
        __EIP712_init_unchained(name, "1");
    }
    function __ERC20Permit_init_unchained(string memory) internal onlyInitializing {}
    /**
     * @inheritdoc IERC20Permit
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        if (block.timestamp > deadline) {
            revert ERC2612ExpiredSignature(deadline);
        }
        bytes32 structHash = keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));
        bytes32 hash = _hashTypedDataV4(structHash);
        address signer = ECDSA.recover(hash, v, r, s);
        if (signer != owner) {
            revert ERC2612InvalidSigner(signer, owner);
        }
        _approve(owner, spender, value);
    }
    /**
     * @inheritdoc IERC20Permit
     */
    function nonces(address owner) public view virtual override(IERC20Permit, NoncesUpgradeable) returns (uint256) {
        return super.nonces(owner);
    }
    /**
     * @inheritdoc IERC20Permit
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view virtual returns (bytes32) {
        return _domainSeparatorV4();
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/IAccessControl.sol)
pragma solidity ^0.8.20;
/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);
    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);
    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);
    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;
    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;
    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)
pragma solidity ^0.8.20;
import {IERC165} from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165Upgradeable is Initializable, IERC165 {
    function __ERC165_init() internal onlyInitializing {
    }
    function __ERC165_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.20;
/**
 * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
 * proxy whose upgrades are fully controlled by the current implementation.
 */
interface IERC1822Proxiable {
    /**
     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
     * address.
     *
     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
     * function revert if invoked through a proxy.
     */
    function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/ERC1967/ERC1967Utils.sol)
pragma solidity ^0.8.20;
import {IBeacon} from "../beacon/IBeacon.sol";
import {Address} from "../../utils/Address.sol";
import {StorageSlot} from "../../utils/StorageSlot.sol";
/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 */
library ERC1967Utils {
    // We re-declare ERC-1967 events here because they can't be used directly from IERC1967.
    // This will be fixed in Solidity 0.8.21. At that point we should remove these events.
    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);
    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @dev Emitted when the beacon is changed.
     */
    event BeaconUpgraded(address indexed beacon);
    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @dev The `implementation` of the proxy is invalid.
     */
    error ERC1967InvalidImplementation(address implementation);
    /**
     * @dev The `admin` of the proxy is invalid.
     */
    error ERC1967InvalidAdmin(address admin);
    /**
     * @dev The `beacon` of the proxy is invalid.
     */
    error ERC1967InvalidBeacon(address beacon);
    /**
     * @dev An upgrade function sees `msg.value > 0` that may be lost.
     */
    error ERC1967NonPayable();
    /**
     * @dev Returns the current implementation address.
     */
    function getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        if (newImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(newImplementation);
        }
        StorageSlot.getAddressSlot(IMPLEMENTATION_SLOT).value = newImplementation;
    }
    /**
     * @dev Performs implementation upgrade with additional setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-Upgraded} event.
     */
    function upgradeToAndCall(address newImplementation, bytes memory data) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
        if (data.length > 0) {
            Address.functionDelegateCall(newImplementation, data);
        } else {
            _checkNonPayable();
        }
    }
    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @dev Returns the current admin.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using
     * the https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(ADMIN_SLOT).value;
    }
    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        if (newAdmin == address(0)) {
            revert ERC1967InvalidAdmin(address(0));
        }
        StorageSlot.getAddressSlot(ADMIN_SLOT).value = newAdmin;
    }
    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {IERC1967-AdminChanged} event.
     */
    function changeAdmin(address newAdmin) internal {
        emit AdminChanged(getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }
    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is the keccak-256 hash of "eip1967.proxy.beacon" subtracted by 1.
     */
    // solhint-disable-next-line private-vars-leading-underscore
    bytes32 internal constant BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
    /**
     * @dev Returns the current beacon.
     */
    function getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(BEACON_SLOT).value;
    }
    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        if (newBeacon.code.length == 0) {
            revert ERC1967InvalidBeacon(newBeacon);
        }
        StorageSlot.getAddressSlot(BEACON_SLOT).value = newBeacon;
        address beaconImplementation = IBeacon(newBeacon).implementation();
        if (beaconImplementation.code.length == 0) {
            revert ERC1967InvalidImplementation(beaconImplementation);
        }
    }
    /**
     * @dev Change the beacon and trigger a setup call if data is nonempty.
     * This function is payable only if the setup call is performed, otherwise `msg.value` is rejected
     * to avoid stuck value in the contract.
     *
     * Emits an {IERC1967-BeaconUpgraded} event.
     *
     * CAUTION: Invoking this function has no effect on an instance of {BeaconProxy} since v5, since
     * it uses an immutable beacon without looking at the value of the ERC-1967 beacon slot for
     * efficiency.
     */
    function upgradeBeaconToAndCall(address newBeacon, bytes memory data) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        } else {
            _checkNonPayable();
        }
    }
    /**
     * @dev Reverts if `msg.value` is not zero. It can be used to avoid `msg.value` stuck in the contract
     * if an upgrade doesn't perform an initialization call.
     */
    function _checkNonPayable() private {
        if (msg.value > 0) {
            revert ERC1967NonPayable();
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);
    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.20;
import {IERC20} from "../IERC20.sol";
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;
/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);
    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);
    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);
    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);
    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);
    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}
/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);
    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);
    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);
    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);
    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);
    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);
    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);
    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}
/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);
    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);
    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);
    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);
    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);
    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);
    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Pausable.sol)
pragma solidity ^0.8.20;
import {ContextUpgradeable} from "../utils/ContextUpgradeable.sol";
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /// @custom:storage-location erc7201:openzeppelin.storage.Pausable
    struct PausableStorage {
        bool _paused;
    }
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Pausable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant PausableStorageLocation = 0xcd5ed15c6e187e77e9aee88184c21f4f2182ab5827cb3b7e07fbedcd63f03300;
    function _getPausableStorage() private pure returns (PausableStorage storage $) {
        assembly {
            $.slot := PausableStorageLocation
        }
    }
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    /**
     * @dev The operation failed because the contract is paused.
     */
    error EnforcedPause();
    /**
     * @dev The operation failed because the contract is not paused.
     */
    error ExpectedPause();
    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }
    function __Pausable_init_unchained() internal onlyInitializing {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        PausableStorage storage $ = _getPausableStorage();
        return $._paused;
    }
    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert EnforcedPause();
        }
    }
    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert ExpectedPause();
        }
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        PausableStorage storage $ = _getPausableStorage();
        $._paused = false;
        emit Unpaused(_msgSender());
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.20;
/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS
    }
    /**
     * @dev The signature derives the `address(0)`.
     */
    error ECDSAInvalidSignature();
    /**
     * @dev The signature has an invalid length.
     */
    error ECDSAInvalidSignatureLength(uint256 length);
    /**
     * @dev The signature has an S value that is in the upper half order.
     */
    error ECDSAInvalidSignatureS(bytes32 s);
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with `signature` or an error. This will not
     * return address(0) without also returning an error description. Errors are documented using an enum (error type)
     * and a bytes32 providing additional information about the error.
     *
     * If no error is returned, then the address can be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError, bytes32) {
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            /// @solidity memory-safe-assembly
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength, bytes32(signature.length));
        }
    }
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM precompile allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {MessageHashUtils-toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, signature);
        _throwError(error, errorArg);
        return recovered;
    }
    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     */
    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError, bytes32) {
        unchecked {
            bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
            // We do not check for an overflow here since the shift operation results in 0 or 1.
            uint8 v = uint8((uint256(vs) >> 255) + 27);
            return tryRecover(hash, v, r, s);
        }
    }
    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     */
    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, r, vs);
        _throwError(error, errorArg);
        return recovered;
    }
    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError, bytes32) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS, s);
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature, bytes32(0));
        }
        return (signer, RecoverError.NoError, bytes32(0));
    }
    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {
        (address recovered, RecoverError error, bytes32 errorArg) = tryRecover(hash, v, r, s);
        _throwError(error, errorArg);
        return recovered;
    }
    /**
     * @dev Optionally reverts with the corresponding custom error according to the `error` argument provided.
     */
    function _throwError(RecoverError error, bytes32 errorArg) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert ECDSAInvalidSignature();
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert ECDSAInvalidSignatureLength(uint256(errorArg));
        } else if (error == RecoverError.InvalidSignatureS) {
            revert ECDSAInvalidSignatureS(errorArg);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/EIP712.sol)
pragma solidity ^0.8.20;
import {MessageHashUtils} from "@openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";
import {IERC5267} from "@openzeppelin/contracts/interfaces/IERC5267.sol";
import {Initializable} from "../../proxy/utils/Initializable.sol";
/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding scheme specified in the EIP requires a domain separator and a hash of the typed structured data, whose
 * encoding is very generic and therefore its implementation in Solidity is not feasible, thus this contract
 * does not implement the encoding itself. Protocols need to implement the type-specific encoding they need in order to
 * produce the hash of their typed data using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain
 * separator of the implementation contract. This will cause the {_domainSeparatorV4} function to always rebuild the
 * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.
 */
abstract contract EIP712Upgradeable is Initializable, IERC5267 {
    bytes32 private constant TYPE_HASH =
        keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)");
    /// @custom:storage-location erc7201:openzeppelin.storage.EIP712
    struct EIP712Storage {
        /// @custom:oz-renamed-from _HASHED_NAME
        bytes32 _hashedName;
        /// @custom:oz-renamed-from _HASHED_VERSION
        bytes32 _hashedVersion;
        string _name;
        string _version;
    }
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.EIP712")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant EIP712StorageLocation = 0xa16a46d94261c7517cc8ff89f61c0ce93598e3c849801011dee649a6a557d100;
    function _getEIP712Storage() private pure returns (EIP712Storage storage $) {
        assembly {
            $.slot := EIP712StorageLocation
        }
    }
    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {
        __EIP712_init_unchained(name, version);
    }
    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {
        EIP712Storage storage $ = _getEIP712Storage();
        $._name = name;
        $._version = version;
        // Reset prior values in storage if upgrading
        $._hashedName = 0;
        $._hashedVersion = 0;
    }
    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        return _buildDomainSeparator();
    }
    function _buildDomainSeparator() private view returns (bytes32) {
        return keccak256(abi.encode(TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));
    }
    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return MessageHashUtils.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
    /**
     * @dev See {IERC-5267}.
     */
    function eip712Domain()
        public
        view
        virtual
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        )
    {
        EIP712Storage storage $ = _getEIP712Storage();
        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized
        // and the EIP712 domain is not reliable, as it will be missing name and version.
        require($._hashedName == 0 && $._hashedVersion == 0, "EIP712: Uninitialized");
        return (
            hex"0f", // 01111
            _EIP712Name(),
            _EIP712Version(),
            block.chainid,
            address(this),
            bytes32(0),
            new uint256[](0)
        );
    }
    /**
     * @dev The name parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Name() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._name;
    }
    /**
     * @dev The version parameter for the EIP712 domain.
     *
     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs
     * are a concern.
     */
    function _EIP712Version() internal view virtual returns (string memory) {
        EIP712Storage storage $ = _getEIP712Storage();
        return $._version;
    }
    /**
     * @dev The hash of the name parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.
     */
    function _EIP712NameHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory name = _EIP712Name();
        if (bytes(name).length > 0) {
            return keccak256(bytes(name));
        } else {
            // If the name is empty, the contract may have been upgraded without initializing the new storage.
            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.
            bytes32 hashedName = $._hashedName;
            if (hashedName != 0) {
                return hashedName;
            } else {
                return keccak256("");
            }
        }
    }
    /**
     * @dev The hash of the version parameter for the EIP712 domain.
     *
     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.
     */
    function _EIP712VersionHash() internal view returns (bytes32) {
        EIP712Storage storage $ = _getEIP712Storage();
        string memory version = _EIP712Version();
        if (bytes(version).length > 0) {
            return keccak256(bytes(version));
        } else {
            // If the version is empty, the contract may have been upgraded without initializing the new storage.
            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.
            bytes32 hashedVersion = $._hashedVersion;
            if (hashedVersion != 0) {
                return hashedVersion;
            } else {
                return keccak256("");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Nonces.sol)
pragma solidity ^0.8.20;
import {Initializable} from "../proxy/utils/Initializable.sol";
/**
 * @dev Provides tracking nonces for addresses. Nonces will only increment.
 */
abstract contract NoncesUpgradeable is Initializable {
    /**
     * @dev The nonce used for an `account` is not the expected current nonce.
     */
    error InvalidAccountNonce(address account, uint256 currentNonce);
    /// @custom:storage-location erc7201:openzeppelin.storage.Nonces
    struct NoncesStorage {
        mapping(address account => uint256) _nonces;
    }
    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Nonces")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant NoncesStorageLocation = 0x5ab42ced628888259c08ac98db1eb0cf702fc1501344311d8b100cd1bfe4bb00;
    function _getNoncesStorage() private pure returns (NoncesStorage storage $) {
        assembly {
            $.slot := NoncesStorageLocation
        }
    }
    function __Nonces_init() internal onlyInitializing {
    }
    function __Nonces_init_unchained() internal onlyInitializing {
    }
    /**
     * @dev Returns the next unused nonce for an address.
     */
    function nonces(address owner) public view virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        return $._nonces[owner];
    }
    /**
     * @dev Consumes a nonce.
     *
     * Returns the current value and increments nonce.
     */
    function _useNonce(address owner) internal virtual returns (uint256) {
        NoncesStorage storage $ = _getNoncesStorage();
        // For each account, the nonce has an initial value of 0, can only be incremented by one, and cannot be
        // decremented or reset. This guarantees that the nonce never overflows.
        unchecked {
            // It is important to do x++ and not ++x here.
            return $._nonces[owner]++;
        }
    }
    /**
     * @dev Same as {_useNonce} but checking that `nonce` is the next valid for `owner`.
     */
    function _useCheckedNonce(address owner, uint256 nonce) internal virtual {
        uint256 current = _useNonce(owner);
        if (nonce != current) {
            revert InvalidAccountNonce(owner, current);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)
pragma solidity ^0.8.20;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.20;
/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {UpgradeableBeacon} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)
pragma solidity ^0.8.20;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);
    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);
    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }
    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/StorageSlot.sol)
// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.
pragma solidity ^0.8.20;
/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```solidity
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(newImplementation.code.length > 0);
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }
    struct BooleanSlot {
        bool value;
    }
    struct Bytes32Slot {
        bytes32 value;
    }
    struct Uint256Slot {
        uint256 value;
    }
    struct StringSlot {
        string value;
    }
    struct BytesSlot {
        bytes value;
    }
    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` with member `value` located at `slot`.
     */
    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.
     */
    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` with member `value` located at `slot`.
     */
    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := slot
        }
    }
    /**
     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.
     */
    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {
        /// @solidity memory-safe-assembly
        assembly {
            r.slot := store.slot
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/cryptography/MessageHashUtils.sol)
pragma solidity ^0.8.20;
import {Strings} from "../Strings.sol";
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing a bytes32 `messageHash` with
     * `"\\x19Ethereum Signed Message:\
32"` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * NOTE: The `messageHash` parameter is intended to be the result of hashing a raw message with
     * keccak256, although any bytes32 value can be safely used because the final digest will
     * be re-hashed.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes32 messageHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            mstore(0x00, "\\x19Ethereum Signed Message:\
32") // 32 is the bytes-length of messageHash
            mstore(0x1c, messageHash) // 0x1c (28) is the length of the prefix
            digest := keccak256(0x00, 0x3c) // 0x3c is the length of the prefix (0x1c) + messageHash (0x20)
        }
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x45` (`personal_sign` messages).
     *
     * The digest is calculated by prefixing an arbitrary `message` with
     * `"\\x19Ethereum Signed Message:\
" + len(message)` and hashing the result. It corresponds with the
     * hash signed when using the https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`] JSON-RPC method.
     *
     * See {ECDSA-recover}.
     */
    function toEthSignedMessageHash(bytes memory message) internal pure returns (bytes32) {
        return
            keccak256(bytes.concat("\\x19Ethereum Signed Message:\
", bytes(Strings.toString(message.length)), message));
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-191 signed data with version
     * `0x00` (data with intended validator).
     *
     * The digest is calculated by prefixing an arbitrary `data` with `"\\x19\\x00"` and the intended
     * `validator` address. Then hashing the result.
     *
     * See {ECDSA-recover}.
     */
    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(hex"19_00", validator, data));
    }
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * See {ECDSA-recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 digest) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, hex"19_01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5267.sol)
pragma solidity ^0.8.20;
interface IERC5267 {
    /**
     * @dev MAY be emitted to signal that the domain could have changed.
     */
    event EIP712DomainChanged();
    /**
     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
     * signature.
     */
    function eip712Domain()
        external
        view
        returns (
            bytes1 fields,
            string memory name,
            string memory version,
            uint256 chainId,
            address verifyingContract,
            bytes32 salt,
            uint256[] memory extensions
        );
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Strings.sol)
pragma solidity ^0.8.20;
import {Math} from "./math/Math.sol";
import {SignedMath} from "./math/SignedMath.sol";
/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant HEX_DIGITS = "0123456789abcdef";
    uint8 private constant ADDRESS_LENGTH = 20;
    /**
     * @dev The `value` string doesn't fit in the specified `length`.
     */
    error StringsInsufficientHexLength(uint256 value, uint256 length);
    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), HEX_DIGITS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }
    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toStringSigned(int256 value) internal pure returns (string memory) {
        return string.concat(value < 0 ? "-" : "", toString(SignedMath.abs(value)));
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }
    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        uint256 localValue = value;
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = HEX_DIGITS[localValue & 0xf];
            localValue >>= 4;
        }
        if (localValue != 0) {
            revert StringsInsufficientHexLength(value, length);
        }
        return string(buffer);
    }
    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal
     * representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), ADDRESS_LENGTH);
    }
    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return bytes(a).length == bytes(b).length && keccak256(bytes(a)) == keccak256(bytes(b));
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)
pragma solidity ^0.8.20;
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();
    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.
            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }
    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }
    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }
    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SignedMath.sol)
pragma solidity ^0.8.20;
/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }
    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }
    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}