pragma solidity ^0.5.3;

/// @title Proxy - Generic proxy contract allows to execute all transactions applying the code of a master contract.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract Proxy {

    // masterCopy always needs to be first declared variable, to ensure that it is at the same location in the contracts to which calls are delegated.
    // To reduce deployment costs this variable is internal and needs to be retrieved via `getStorageAt`
    address internal masterCopy;

    /// @dev Constructor function sets address of master copy contract.
    /// @param _masterCopy Master copy address.
    constructor(address _masterCopy)
        public
    {
        require(_masterCopy != address(0), "Invalid master copy address provided");
        masterCopy = _masterCopy;
    }

    /// @dev Fallback function forwards all transactions and returns all received return data.
    function ()
        external
        payable
    {
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            let masterCopy := and(sload(0), 0xffffffffffffffffffffffffffffffffffffffff)
            // 0xa619486e == keccak("masterCopy()"). The value is right padded to 32-bytes with 0s
            if eq(calldataload(0), 0xa619486e00000000000000000000000000000000000000000000000000000000) {
                mstore(0, masterCopy)
                return(0, 0x20)
            }
            calldatacopy(0, 0, calldatasize())
            let success := delegatecall(gas, masterCopy, 0, calldatasize(), 0, 0)
            returndatacopy(0, 0, returndatasize())
            if eq(success, 0) { revert(0, returndatasize()) }
            return(0, returndatasize())
        }
    }
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function migrator() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
    function setMigrator(address) external;
}

// File: contracts/uniswapv2/libraries/SafeMath.sol

pragma solidity =0.6.12;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMathUniswap {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/uniswapv2/UniswapV2ERC20.sol

pragma solidity =0.6.12;


contract UniswapV2ERC20 {
    using SafeMathUniswap for uint;

    string public constant name = 'SushiSwap LP Token';
    string public constant symbol = 'SLP';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid()
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/uniswapv2/libraries/Math.sol

pragma solidity =0.6.12;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/uniswapv2/libraries/UQ112x112.sol

pragma solidity =0.6.12;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/uniswapv2/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20Uniswap {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/uniswapv2/UniswapV2Pair.sol

pragma solidity =0.6.12;








interface IMigrator {
    // Return the desired amount of liquidity token that the migrator wants.
    function desiredLiquidity() external view returns (uint256);
}

contract UniswapV2Pair is UniswapV2ERC20 {
    using SafeMathUniswap  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20Uniswap(token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            address migrator = IUniswapV2Factory(factory).migrator();
            if (msg.sender == migrator) {
                liquidity = IMigrator(migrator).desiredLiquidity();
                require(liquidity > 0 && liquidity != uint256(-1), "Bad desired liquidity");
            } else {
                require(migrator == address(0), "Must not have migrator");
                liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
                _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
            }
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20Uniswap(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20Uniswap(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20Uniswap(token0).balanceOf(address(this)), IERC20Uniswap(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

// File: contracts/uniswapv2/UniswapV2Factory.sol

pragma solidity =0.6.12;



contract UniswapV2Factory is IUniswapV2Factory {
    address public override feeTo;
    address public override feeToSetter;
    address public override migrator;

    mapping(address => mapping(address => address)) public override getPair;
    address[] public override allPairs;

    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    constructor(address _feeToSetter) public {
        feeToSetter = _feeToSetter;
    }

    function allPairsLength() external override view returns (uint) {
        return allPairs.length;
    }

    function pairCodeHash() external pure returns (bytes32) {
        return keccak256(type(UniswapV2Pair).creationCode);
    }

    function createPair(address tokenA, address tokenB) external override returns (address pair) {
        require(tokenA != tokenB, 'UniswapV2: IDENTICAL_ADDRESSES');
        (address token0, address token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), 'UniswapV2: ZERO_ADDRESS');
        require(getPair[token0][token1] == address(0), 'UniswapV2: PAIR_EXISTS'); // single check is sufficient
        bytes memory bytecode = type(UniswapV2Pair).creationCode;
        bytes32 salt = keccak256(abi.encodePacked(token0, token1));
        assembly {
            pair := create2(0, add(bytecode, 32), mload(bytecode), salt)
        }
        UniswapV2Pair(pair).initialize(token0, token1);
        getPair[token0][token1] = pair;
        getPair[token1][token0] = pair; // populate mapping in the reverse direction
        allPairs.push(pair);
        emit PairCreated(token0, token1, pair, allPairs.length);
    }

    function setFeeTo(address _feeTo) external override {
        require(msg.sender == feeToSetter, 'UniswapV2: FORBIDDEN');
        feeTo = _feeTo;
    }

    function setMigrator(address _migrator) external override {
        require(msg.sender == feeToSetter, 'UniswapV2: FORBIDDEN');
        migrator = _migrator;
    }

    function setFeeToSetter(address _feeToSetter) external override {
        require(msg.sender == feeToSetter, 'UniswapV2: FORBIDDEN');
        feeToSetter = _feeToSetter;
    }

}

// File: contracts/uniswapv2/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function migrator() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
    function setMigrator(address) external;
}

// File: contracts/uniswapv2/libraries/SafeMath.sol

pragma solidity =0.6.12;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMathUniswap {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/uniswapv2/UniswapV2ERC20.sol

pragma solidity =0.6.12;


contract UniswapV2ERC20 {
    using SafeMathUniswap for uint;

    string public constant name = 'SushiSwap LP Token';
    string public constant symbol = 'SLP';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid()
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/uniswapv2/libraries/Math.sol

pragma solidity =0.6.12;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/uniswapv2/libraries/UQ112x112.sol

pragma solidity =0.6.12;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/uniswapv2/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20Uniswap {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/uniswapv2/UniswapV2Pair.sol

pragma solidity =0.6.12;








interface IMigrator {
    // Return the desired amount of liquidity token that the migrator wants.
    function desiredLiquidity() external view returns (uint256);
}

contract UniswapV2Pair is UniswapV2ERC20 {
    using SafeMathUniswap  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20Uniswap(token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            address migrator = IUniswapV2Factory(factory).migrator();
            if (msg.sender == migrator) {
                liquidity = IMigrator(migrator).desiredLiquidity();
                require(liquidity > 0 && liquidity != uint256(-1), "Bad desired liquidity");
            } else {
                require(migrator == address(0), "Must not have migrator");
                liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
                _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
            }
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        uint balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20Uniswap(_token0).balanceOf(address(this));
        balance1 = IERC20Uniswap(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20Uniswap(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20Uniswap(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20Uniswap(token0).balanceOf(address(this)), IERC20Uniswap(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;
    mapping(address => mapping(address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }
        return true;
    }
    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;
        emit Transfer(sender, recipient, amount);
        _afterTokenTransfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);
        _afterTokenTransfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;
        emit Transfer(account, address(0), amount);
        _afterTokenTransfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./draft-ERC20Permit.sol";
import "../../../utils/math/Math.sol";
import "../../../utils/math/SafeCast.sol";
import "../../../utils/cryptography/ECDSA.sol";
/**
 * @dev Extension of ERC20 to support Compound-like voting and delegation. This version is more generic than Compound's,
 * and supports token supply up to 2^224^ - 1, while COMP is limited to 2^96^ - 1.
 *
 * NOTE: If exact COMP compatibility is required, use the {ERC20VotesComp} variant of this module.
 *
 * This extension keeps a history (checkpoints) of each account's vote power. Vote power can be delegated either
 * by calling the {delegate} function directly, or by providing a signature to be used with {delegateBySig}. Voting
 * power can be queried through the public accessors {getVotes} and {getPastVotes}.
 *
 * By default, token balance does not account for voting power. This makes transfers cheaper. The downside is that it
 * requires users to delegate to themselves in order to activate checkpoints and have their voting power tracked.
 * Enabling self-delegation can easily be done by overriding the {delegates} function. Keep in mind however that this
 * will significantly increase the base gas cost of transfers.
 *
 * _Available since v4.2._
 */
abstract contract ERC20Votes is ERC20Permit {
    struct Checkpoint {
        uint32 fromBlock;
        uint224 votes;
    }
    bytes32 private constant _DELEGATION_TYPEHASH =
        keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
    mapping(address => address) private _delegates;
    mapping(address => Checkpoint[]) private _checkpoints;
    Checkpoint[] private _totalSupplyCheckpoints;
    /**
     * @dev Emitted when an account changes their delegate.
     */
    event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
    /**
     * @dev Emitted when a token transfer or delegate change results in changes to an account's voting power.
     */
    event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);
    /**
     * @dev Get the `pos`-th checkpoint for `account`.
     */
    function checkpoints(address account, uint32 pos) public view virtual returns (Checkpoint memory) {
        return _checkpoints[account][pos];
    }
    /**
     * @dev Get number of checkpoints for `account`.
     */
    function numCheckpoints(address account) public view virtual returns (uint32) {
        return SafeCast.toUint32(_checkpoints[account].length);
    }
    /**
     * @dev Get the address `account` is currently delegating to.
     */
    function delegates(address account) public view virtual returns (address) {
        return _delegates[account];
    }
    /**
     * @dev Gets the current votes balance for `account`
     */
    function getVotes(address account) public view returns (uint256) {
        uint256 pos = _checkpoints[account].length;
        return pos == 0 ? 0 : _checkpoints[account][pos - 1].votes;
    }
    /**
     * @dev Retrieve the number of votes for `account` at the end of `blockNumber`.
     *
     * Requirements:
     *
     * - `blockNumber` must have been already mined
     */
    function getPastVotes(address account, uint256 blockNumber) public view returns (uint256) {
        require(blockNumber < block.number, "ERC20Votes: block not yet mined");
        return _checkpointsLookup(_checkpoints[account], blockNumber);
    }
    /**
     * @dev Retrieve the `totalSupply` at the end of `blockNumber`. Note, this value is the sum of all balances.
     * It is but NOT the sum of all the delegated votes!
     *
     * Requirements:
     *
     * - `blockNumber` must have been already mined
     */
    function getPastTotalSupply(uint256 blockNumber) public view returns (uint256) {
        require(blockNumber < block.number, "ERC20Votes: block not yet mined");
        return _checkpointsLookup(_totalSupplyCheckpoints, blockNumber);
    }
    /**
     * @dev Lookup a value in a list of (sorted) checkpoints.
     */
    function _checkpointsLookup(Checkpoint[] storage ckpts, uint256 blockNumber) private view returns (uint256) {
        // We run a binary search to look for the earliest checkpoint taken after `blockNumber`.
        //
        // During the loop, the index of the wanted checkpoint remains in the range [low-1, high).
        // With each iteration, either `low` or `high` is moved towards the middle of the range to maintain the invariant.
        // - If the middle checkpoint is after `blockNumber`, we look in [low, mid)
        // - If the middle checkpoint is before or equal to `blockNumber`, we look in [mid+1, high)
        // Once we reach a single value (when low == high), we've found the right checkpoint at the index high-1, if not
        // out of bounds (in which case we're looking too far in the past and the result is 0).
        // Note that if the latest checkpoint available is exactly for `blockNumber`, we end up with an index that is
        // past the end of the array, so we technically don't find a checkpoint after `blockNumber`, but it works out
        // the same.
        uint256 high = ckpts.length;
        uint256 low = 0;
        while (low < high) {
            uint256 mid = Math.average(low, high);
            if (ckpts[mid].fromBlock > blockNumber) {
                high = mid;
            } else {
                low = mid + 1;
            }
        }
        return high == 0 ? 0 : ckpts[high - 1].votes;
    }
    /**
     * @dev Delegate votes from the sender to `delegatee`.
     */
    function delegate(address delegatee) public virtual {
        return _delegate(_msgSender(), delegatee);
    }
    /**
     * @dev Delegates votes from signer to `delegatee`
     */
    function delegateBySig(
        address delegatee,
        uint256 nonce,
        uint256 expiry,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(block.timestamp <= expiry, "ERC20Votes: signature expired");
        address signer = ECDSA.recover(
            _hashTypedDataV4(keccak256(abi.encode(_DELEGATION_TYPEHASH, delegatee, nonce, expiry))),
            v,
            r,
            s
        );
        require(nonce == _useNonce(signer), "ERC20Votes: invalid nonce");
        return _delegate(signer, delegatee);
    }
    /**
     * @dev Maximum token supply. Defaults to `type(uint224).max` (2^224^ - 1).
     */
    function _maxSupply() internal view virtual returns (uint224) {
        return type(uint224).max;
    }
    /**
     * @dev Snapshots the totalSupply after it has been increased.
     */
    function _mint(address account, uint256 amount) internal virtual override {
        super._mint(account, amount);
        require(totalSupply() <= _maxSupply(), "ERC20Votes: total supply risks overflowing votes");
        _writeCheckpoint(_totalSupplyCheckpoints, _add, amount);
    }
    /**
     * @dev Snapshots the totalSupply after it has been decreased.
     */
    function _burn(address account, uint256 amount) internal virtual override {
        super._burn(account, amount);
        _writeCheckpoint(_totalSupplyCheckpoints, _subtract, amount);
    }
    /**
     * @dev Move voting power when tokens are transferred.
     *
     * Emits a {DelegateVotesChanged} event.
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual override {
        super._afterTokenTransfer(from, to, amount);
        _moveVotingPower(delegates(from), delegates(to), amount);
    }
    /**
     * @dev Change delegation for `delegator` to `delegatee`.
     *
     * Emits events {DelegateChanged} and {DelegateVotesChanged}.
     */
    function _delegate(address delegator, address delegatee) internal virtual {
        address currentDelegate = delegates(delegator);
        uint256 delegatorBalance = balanceOf(delegator);
        _delegates[delegator] = delegatee;
        emit DelegateChanged(delegator, currentDelegate, delegatee);
        _moveVotingPower(currentDelegate, delegatee, delegatorBalance);
    }
    function _moveVotingPower(
        address src,
        address dst,
        uint256 amount
    ) private {
        if (src != dst && amount > 0) {
            if (src != address(0)) {
                (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[src], _subtract, amount);
                emit DelegateVotesChanged(src, oldWeight, newWeight);
            }
            if (dst != address(0)) {
                (uint256 oldWeight, uint256 newWeight) = _writeCheckpoint(_checkpoints[dst], _add, amount);
                emit DelegateVotesChanged(dst, oldWeight, newWeight);
            }
        }
    }
    function _writeCheckpoint(
        Checkpoint[] storage ckpts,
        function(uint256, uint256) view returns (uint256) op,
        uint256 delta
    ) private returns (uint256 oldWeight, uint256 newWeight) {
        uint256 pos = ckpts.length;
        oldWeight = pos == 0 ? 0 : ckpts[pos - 1].votes;
        newWeight = op(oldWeight, delta);
        if (pos > 0 && ckpts[pos - 1].fromBlock == block.number) {
            ckpts[pos - 1].votes = SafeCast.toUint224(newWeight);
        } else {
            ckpts.push(Checkpoint({fromBlock: SafeCast.toUint32(block.number), votes: SafeCast.toUint224(newWeight)}));
        }
    }
    function _add(uint256 a, uint256 b) private pure returns (uint256) {
        return a + b;
    }
    function _subtract(uint256 a, uint256 b) private pure returns (uint256) {
        return a - b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);
    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);
    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./draft-IERC20Permit.sol";
import "../ERC20.sol";
import "../../../utils/cryptography/draft-EIP712.sol";
import "../../../utils/cryptography/ECDSA.sol";
import "../../../utils/Counters.sol";
/**
 * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * _Available since v3.4._
 */
abstract contract ERC20Permit is ERC20, IERC20Permit, EIP712 {
    using Counters for Counters.Counter;
    mapping(address => Counters.Counter) private _nonces;
    // solhint-disable-next-line var-name-mixedcase
    bytes32 private immutable _PERMIT_TYPEHASH =
        keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    /**
     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `"1"`.
     *
     * It's a good idea to use the same `name` that is defined as the ERC20 token name.
     */
    constructor(string memory name) EIP712(name, "1") {}
    /**
     * @dev See {IERC20Permit-permit}.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual override {
        require(block.timestamp <= deadline, "ERC20Permit: expired deadline");
        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));
        bytes32 hash = _hashTypedDataV4(structHash);
        address signer = ECDSA.recover(hash, v, r, s);
        require(signer == owner, "ERC20Permit: invalid signature");
        _approve(owner, spender, value);
    }
    /**
     * @dev See {IERC20Permit-nonces}.
     */
    function nonces(address owner) public view virtual override returns (uint256) {
        return _nonces[owner].current();
    }
    /**
     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view override returns (bytes32) {
        return _domainSeparatorV4();
    }
    /**
     * @dev "Consume a nonce": return the current value and increment.
     *
     * _Available since v4.1._
     */
    function _useNonce(address owner) internal virtual returns (uint256 current) {
        Counters.Counter storage nonce = _nonces[owner];
        current = nonce.current();
        nonce.increment();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 */
library Counters {
    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }
    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }
    function increment(Counter storage counter) internal {
        unchecked {
            counter._value += 1;
        }
    }
    function decrement(Counter storage counter) internal {
        uint256 value = counter._value;
        require(value > 0, "Counter: decrement overflow");
        unchecked {
            counter._value = value - 1;
        }
    }
    function reset(Counter storage counter) internal {
        counter._value = 0;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
 *
 * These functions can be used to verify that a message was signed by the holder
 * of the private keys of a given address.
 */
library ECDSA {
    enum RecoverError {
        NoError,
        InvalidSignature,
        InvalidSignatureLength,
        InvalidSignatureS,
        InvalidSignatureV
    }
    function _throwError(RecoverError error) private pure {
        if (error == RecoverError.NoError) {
            return; // no error: do nothing
        } else if (error == RecoverError.InvalidSignature) {
            revert("ECDSA: invalid signature");
        } else if (error == RecoverError.InvalidSignatureLength) {
            revert("ECDSA: invalid signature length");
        } else if (error == RecoverError.InvalidSignatureS) {
            revert("ECDSA: invalid signature 's' value");
        } else if (error == RecoverError.InvalidSignatureV) {
            revert("ECDSA: invalid signature 'v' value");
        }
    }
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature` or error string. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     *
     * Documentation for signature generation:
     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
     *
     * _Available since v4.3._
     */
    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
        // Check the signature length
        // - case 65: r,s,v signature (standard)
        // - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
        if (signature.length == 65) {
            bytes32 r;
            bytes32 s;
            uint8 v;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                s := mload(add(signature, 0x40))
                v := byte(0, mload(add(signature, 0x60)))
            }
            return tryRecover(hash, v, r, s);
        } else if (signature.length == 64) {
            bytes32 r;
            bytes32 vs;
            // ecrecover takes the signature parameters, and the only way to get them
            // currently is to use assembly.
            assembly {
                r := mload(add(signature, 0x20))
                vs := mload(add(signature, 0x40))
            }
            return tryRecover(hash, r, vs);
        } else {
            return (address(0), RecoverError.InvalidSignatureLength);
        }
    }
    /**
     * @dev Returns the address that signed a hashed message (`hash`) with
     * `signature`. This address can then be used for verification purposes.
     *
     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
     * this function rejects them by requiring the `s` value to be in the lower
     * half order, and the `v` value to be either 27 or 28.
     *
     * IMPORTANT: `hash` _must_ be the result of a hash operation for the
     * verification to be secure: it is possible to craft signatures that
     * recover to arbitrary addresses for non-hashed data. A safe way to ensure
     * this is by receiving a hash of the original message (which may otherwise
     * be too long), and then calling {toEthSignedMessageHash} on it.
     */
    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, signature);
        _throwError(error);
        return recovered;
    }
    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
     *
     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address, RecoverError) {
        bytes32 s;
        uint8 v;
        assembly {
            s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            v := add(shr(255, vs), 27)
        }
        return tryRecover(hash, v, r, s);
    }
    /**
     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
     *
     * _Available since v4.2._
     */
    function recover(
        bytes32 hash,
        bytes32 r,
        bytes32 vs
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, r, vs);
        _throwError(error);
        return recovered;
    }
    /**
     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,
     * `r` and `s` signature fields separately.
     *
     * _Available since v4.3._
     */
    function tryRecover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address, RecoverError) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
            return (address(0), RecoverError.InvalidSignatureS);
        }
        if (v != 27 && v != 28) {
            return (address(0), RecoverError.InvalidSignatureV);
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(hash, v, r, s);
        if (signer == address(0)) {
            return (address(0), RecoverError.InvalidSignature);
        }
        return (signer, RecoverError.NoError);
    }
    /**
     * @dev Overload of {ECDSA-recover} that receives the `v`,
     * `r` and `s` signature fields separately.
     */
    function recover(
        bytes32 hash,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);
        _throwError(error);
        return recovered;
    }
    /**
     * @dev Returns an Ethereum Signed Message, created from a `hash`. This
     * produces hash corresponding to the one signed with the
     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
     * JSON-RPC method as part of EIP-191.
     *
     * See {recover}.
     */
    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
        // 32 is the length in bytes of hash,
        // enforced by the type signature above
        return keccak256(abi.encodePacked("\\x19Ethereum Signed Message:\
32", hash));
    }
    /**
     * @dev Returns an Ethereum Signed Typed Data, created from a
     * `domainSeparator` and a `structHash`. This produces hash corresponding
     * to the one signed with the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
     * JSON-RPC method as part of EIP-712.
     *
     * See {recover}.
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked("\\x19\\x01", domainSeparator, structHash));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ECDSA.sol";
/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;
    /* solhint-enable var-name-mixedcase */
    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _TYPE_HASH = typeHash;
    }
    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }
    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }
    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a / b + (a % b == 0 ? 0 : 1);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }
    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }
    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }
    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }
    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }
    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }
    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }
    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }
    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }
    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }
    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }
    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }
    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits.
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }
    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.7;
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Votes.sol";
/// @title ANGLE
/// @author Forked but improved from https://github.com/compound-finance/compound-protocol/tree/master/contracts/Governance
/// by Angle Core Team
/// @notice Governance token of Angle's protocol
contract ANGLE is ERC20Votes {
    /// @notice An event that is emitted when the minter address is changed
    event MinterChanged(address minter, address newMinter);
    /// @notice Minimum time between mints
    uint32 public constant MINIMUM_BETWEEN_MINTS = 1 days * 30;
    /// @notice Cap on the percentage of `totalSupply()` that can be minted at each mint
    uint8 public constant MAX_MINT = 1;
    /// @notice Address which may mint new tokens
    address public minter;
    /// @notice The timestamp after which minting may occur
    uint256 public mintingAllowedAfter;
    /// @notice Constructs a new ANGLE token
    /// @param account Initial account to grant all the tokens to
    /// @param minter_ Account with minting ability
    constructor(address account, address minter_) ERC20Permit("ANGLE") ERC20("ANGLE", "ANGLE") {
        require(account != address(0) && minter_ != address(0), "0");
        _mint(account, 1_000_000_000e18); // 1 billion ANGLE
        minter = minter_;
        emit MinterChanged(address(0), minter);
        mintingAllowedAfter = block.timestamp;
    }
    /// @notice Changes the minter address
    /// @param minter_ Address of the new minter
    function setMinter(address minter_) external {
        require(msg.sender == minter, "67");
        require(minter_ != address(0), "0");
        emit MinterChanged(minter, minter_);
        minter = minter_;
    }
    /// @notice Mints new tokens
    /// @param dst Address of the destination account
    /// @param amount Number of tokens to be minted
    function mint(address dst, uint256 amount) external {
        require(msg.sender == minter, "68");
        require(block.timestamp >= mintingAllowedAfter, "69");
        require(amount <= (totalSupply() * MAX_MINT) / 100, "70");
        // Record the mint
        mintingAllowedAfter = block.timestamp + MINIMUM_BETWEEN_MINTS;
        // Mint the amount
        _mint(dst, amount);
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

// File: contracts/uniswapv2/interfaces/IUniswapV2Pair.sol

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// File: contracts/uniswapv2/libraries/SafeMath.sol

pragma solidity =0.6.12;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMathUniswap {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/uniswapv2/libraries/UniswapV2Library.sol

pragma solidity >=0.5.0;



library UniswapV2Library {
    using SafeMathUniswap for uint;

    // returns sorted token addresses, used to handle return values from pairs sorted in this order
    function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
        require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
        (token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
        require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
    }

    // calculates the CREATE2 address for a pair without making any external calls
    function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
        (address token0, address token1) = sortTokens(tokenA, tokenB);
        pair = address(uint(keccak256(abi.encodePacked(
                hex'ff',
                factory,
                keccak256(abi.encodePacked(token0, token1)),
                hex'e18a34eb0e04b04f7a0ac29a6e80748dca96319b42c54d679cb821dca90c6303' // init code hash
            ))));
    }

    // fetches and sorts the reserves for a pair
    function getReserves(address factory, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
        (address token0,) = sortTokens(tokenA, tokenB);
        (uint reserve0, uint reserve1,) = IUniswapV2Pair(pairFor(factory, tokenA, tokenB)).getReserves();
        (reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
    }

    // given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
    function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
        require(amountA > 0, 'UniswapV2Library: INSUFFICIENT_AMOUNT');
        require(reserveA > 0 && reserveB > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        amountB = amountA.mul(reserveB) / reserveA;
    }

    // given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
        require(amountIn > 0, 'UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT');
        require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        uint amountInWithFee = amountIn.mul(997);
        uint numerator = amountInWithFee.mul(reserveOut);
        uint denominator = reserveIn.mul(1000).add(amountInWithFee);
        amountOut = numerator / denominator;
    }

    // given an output amount of an asset and pair reserves, returns a required input amount of the other asset
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
        require(amountOut > 0, 'UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT');
        require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
        uint numerator = reserveIn.mul(amountOut).mul(1000);
        uint denominator = reserveOut.sub(amountOut).mul(997);
        amountIn = (numerator / denominator).add(1);
    }

    // performs chained getAmountOut calculations on any number of pairs
    function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
        require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
        amounts = new uint[](path.length);
        amounts[0] = amountIn;
        for (uint i; i < path.length - 1; i++) {
            (uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
            amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
        }
    }

    // performs chained getAmountIn calculations on any number of pairs
    function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
        require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
        amounts = new uint[](path.length);
        amounts[amounts.length - 1] = amountOut;
        for (uint i = path.length - 1; i > 0; i--) {
            (uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
            amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
        }
    }
}

// File: contracts/uniswapv2/libraries/TransferHelper.sol

// SPDX-License-Identifier: GPL-3.0-or-later

pragma solidity >=0.6.0;

// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(address token, address to, uint value) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: APPROVE_FAILED');
    }

    function safeTransfer(address token, address to, uint value) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FAILED');
    }

    function safeTransferFrom(address token, address from, address to, uint value) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'TransferHelper: TRANSFER_FROM_FAILED');
    }

    function safeTransferETH(address to, uint value) internal {
        (bool success,) = to.call{value:value}(new bytes(0));
        require(success, 'TransferHelper: ETH_TRANSFER_FAILED');
    }
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Router01.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);

    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);

    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Router02.sol

pragma solidity >=0.6.2;


interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);

    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}

// File: contracts/uniswapv2/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);
    function migrator() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
    function setMigrator(address) external;
}

// File: contracts/uniswapv2/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20Uniswap {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/uniswapv2/interfaces/IWETH.sol

pragma solidity >=0.5.0;

interface IWETH {
    function deposit() external payable;
    function transfer(address to, uint value) external returns (bool);
    function withdraw(uint) external;
}

// File: contracts/uniswapv2/UniswapV2Router02.sol

pragma solidity =0.6.12;








contract UniswapV2Router02 is IUniswapV2Router02 {
    using SafeMathUniswap for uint;

    address public immutable override factory;
    address public immutable override WETH;

    modifier ensure(uint deadline) {
        require(deadline >= block.timestamp, 'UniswapV2Router: EXPIRED');
        _;
    }

    constructor(address _factory, address _WETH) public {
        factory = _factory;
        WETH = _WETH;
    }

    receive() external payable {
        assert(msg.sender == WETH); // only accept ETH via fallback from the WETH contract
    }

    // **** ADD LIQUIDITY ****
    function _addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin
    ) internal virtual returns (uint amountA, uint amountB) {
        // create the pair if it doesn't exist yet
        if (IUniswapV2Factory(factory).getPair(tokenA, tokenB) == address(0)) {
            IUniswapV2Factory(factory).createPair(tokenA, tokenB);
        }
        (uint reserveA, uint reserveB) = UniswapV2Library.getReserves(factory, tokenA, tokenB);
        if (reserveA == 0 && reserveB == 0) {
            (amountA, amountB) = (amountADesired, amountBDesired);
        } else {
            uint amountBOptimal = UniswapV2Library.quote(amountADesired, reserveA, reserveB);
            if (amountBOptimal <= amountBDesired) {
                require(amountBOptimal >= amountBMin, 'UniswapV2Router: INSUFFICIENT_B_AMOUNT');
                (amountA, amountB) = (amountADesired, amountBOptimal);
            } else {
                uint amountAOptimal = UniswapV2Library.quote(amountBDesired, reserveB, reserveA);
                assert(amountAOptimal <= amountADesired);
                require(amountAOptimal >= amountAMin, 'UniswapV2Router: INSUFFICIENT_A_AMOUNT');
                (amountA, amountB) = (amountAOptimal, amountBDesired);
            }
        }
    }
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external virtual override ensure(deadline) returns (uint amountA, uint amountB, uint liquidity) {
        (amountA, amountB) = _addLiquidity(tokenA, tokenB, amountADesired, amountBDesired, amountAMin, amountBMin);
        address pair = UniswapV2Library.pairFor(factory, tokenA, tokenB);
        TransferHelper.safeTransferFrom(tokenA, msg.sender, pair, amountA);
        TransferHelper.safeTransferFrom(tokenB, msg.sender, pair, amountB);
        liquidity = IUniswapV2Pair(pair).mint(to);
    }
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external virtual override payable ensure(deadline) returns (uint amountToken, uint amountETH, uint liquidity) {
        (amountToken, amountETH) = _addLiquidity(
            token,
            WETH,
            amountTokenDesired,
            msg.value,
            amountTokenMin,
            amountETHMin
        );
        address pair = UniswapV2Library.pairFor(factory, token, WETH);
        TransferHelper.safeTransferFrom(token, msg.sender, pair, amountToken);
        IWETH(WETH).deposit{value: amountETH}();
        assert(IWETH(WETH).transfer(pair, amountETH));
        liquidity = IUniswapV2Pair(pair).mint(to);
        // refund dust eth, if any
        if (msg.value > amountETH) TransferHelper.safeTransferETH(msg.sender, msg.value - amountETH);
    }

    // **** REMOVE LIQUIDITY ****
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) public virtual override ensure(deadline) returns (uint amountA, uint amountB) {
        address pair = UniswapV2Library.pairFor(factory, tokenA, tokenB);
        IUniswapV2Pair(pair).transferFrom(msg.sender, pair, liquidity); // send liquidity to pair
        (uint amount0, uint amount1) = IUniswapV2Pair(pair).burn(to);
        (address token0,) = UniswapV2Library.sortTokens(tokenA, tokenB);
        (amountA, amountB) = tokenA == token0 ? (amount0, amount1) : (amount1, amount0);
        require(amountA >= amountAMin, 'UniswapV2Router: INSUFFICIENT_A_AMOUNT');
        require(amountB >= amountBMin, 'UniswapV2Router: INSUFFICIENT_B_AMOUNT');
    }
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) public virtual override ensure(deadline) returns (uint amountToken, uint amountETH) {
        (amountToken, amountETH) = removeLiquidity(
            token,
            WETH,
            liquidity,
            amountTokenMin,
            amountETHMin,
            address(this),
            deadline
        );
        TransferHelper.safeTransfer(token, to, amountToken);
        IWETH(WETH).withdraw(amountETH);
        TransferHelper.safeTransferETH(to, amountETH);
    }
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external virtual override returns (uint amountA, uint amountB) {
        address pair = UniswapV2Library.pairFor(factory, tokenA, tokenB);
        uint value = approveMax ? uint(-1) : liquidity;
        IUniswapV2Pair(pair).permit(msg.sender, address(this), value, deadline, v, r, s);
        (amountA, amountB) = removeLiquidity(tokenA, tokenB, liquidity, amountAMin, amountBMin, to, deadline);
    }
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external virtual override returns (uint amountToken, uint amountETH) {
        address pair = UniswapV2Library.pairFor(factory, token, WETH);
        uint value = approveMax ? uint(-1) : liquidity;
        IUniswapV2Pair(pair).permit(msg.sender, address(this), value, deadline, v, r, s);
        (amountToken, amountETH) = removeLiquidityETH(token, liquidity, amountTokenMin, amountETHMin, to, deadline);
    }

    // **** REMOVE LIQUIDITY (supporting fee-on-transfer tokens) ****
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) public virtual override ensure(deadline) returns (uint amountETH) {
        (, amountETH) = removeLiquidity(
            token,
            WETH,
            liquidity,
            amountTokenMin,
            amountETHMin,
            address(this),
            deadline
        );
        TransferHelper.safeTransfer(token, to, IERC20Uniswap(token).balanceOf(address(this)));
        IWETH(WETH).withdraw(amountETH);
        TransferHelper.safeTransferETH(to, amountETH);
    }
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external virtual override returns (uint amountETH) {
        address pair = UniswapV2Library.pairFor(factory, token, WETH);
        uint value = approveMax ? uint(-1) : liquidity;
        IUniswapV2Pair(pair).permit(msg.sender, address(this), value, deadline, v, r, s);
        amountETH = removeLiquidityETHSupportingFeeOnTransferTokens(
            token, liquidity, amountTokenMin, amountETHMin, to, deadline
        );
    }

    // **** SWAP ****
    // requires the initial amount to have already been sent to the first pair
    function _swap(uint[] memory amounts, address[] memory path, address _to) internal virtual {
        for (uint i; i < path.length - 1; i++) {
            (address input, address output) = (path[i], path[i + 1]);
            (address token0,) = UniswapV2Library.sortTokens(input, output);
            uint amountOut = amounts[i + 1];
            (uint amount0Out, uint amount1Out) = input == token0 ? (uint(0), amountOut) : (amountOut, uint(0));
            address to = i < path.length - 2 ? UniswapV2Library.pairFor(factory, output, path[i + 2]) : _to;
            IUniswapV2Pair(UniswapV2Library.pairFor(factory, input, output)).swap(
                amount0Out, amount1Out, to, new bytes(0)
            );
        }
    }
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external virtual override ensure(deadline) returns (uint[] memory amounts) {
        amounts = UniswapV2Library.getAmountsOut(factory, amountIn, path);
        require(amounts[amounts.length - 1] >= amountOutMin, 'UniswapV2Router: INSUFFICIENT_OUTPUT_AMOUNT');
        TransferHelper.safeTransferFrom(
            path[0], msg.sender, UniswapV2Library.pairFor(factory, path[0], path[1]), amounts[0]
        );
        _swap(amounts, path, to);
    }
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external virtual override ensure(deadline) returns (uint[] memory amounts) {
        amounts = UniswapV2Library.getAmountsIn(factory, amountOut, path);
        require(amounts[0] <= amountInMax, 'UniswapV2Router: EXCESSIVE_INPUT_AMOUNT');
        TransferHelper.safeTransferFrom(
            path[0], msg.sender, UniswapV2Library.pairFor(factory, path[0], path[1]), amounts[0]
        );
        _swap(amounts, path, to);
    }
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        virtual
        override
        payable
        ensure(deadline)
        returns (uint[] memory amounts)
    {
        require(path[0] == WETH, 'UniswapV2Router: INVALID_PATH');
        amounts = UniswapV2Library.getAmountsOut(factory, msg.value, path);
        require(amounts[amounts.length - 1] >= amountOutMin, 'UniswapV2Router: INSUFFICIENT_OUTPUT_AMOUNT');
        IWETH(WETH).deposit{value: amounts[0]}();
        assert(IWETH(WETH).transfer(UniswapV2Library.pairFor(factory, path[0], path[1]), amounts[0]));
        _swap(amounts, path, to);
    }
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        virtual
        override
        ensure(deadline)
        returns (uint[] memory amounts)
    {
        require(path[path.length - 1] == WETH, 'UniswapV2Router: INVALID_PATH');
        amounts = UniswapV2Library.getAmountsIn(factory, amountOut, path);
        require(amounts[0] <= amountInMax, 'UniswapV2Router: EXCESSIVE_INPUT_AMOUNT');
        TransferHelper.safeTransferFrom(
            path[0], msg.sender, UniswapV2Library.pairFor(factory, path[0], path[1]), amounts[0]
        );
        _swap(amounts, path, address(this));
        IWETH(WETH).withdraw(amounts[amounts.length - 1]);
        TransferHelper.safeTransferETH(to, amounts[amounts.length - 1]);
    }
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        virtual
        override
        ensure(deadline)
        returns (uint[] memory amounts)
    {
        require(path[path.length - 1] == WETH, 'UniswapV2Router: INVALID_PATH');
        amounts = UniswapV2Library.getAmountsOut(factory, amountIn, path);
        require(amounts[amounts.length - 1] >= amountOutMin, 'UniswapV2Router: INSUFFICIENT_OUTPUT_AMOUNT');
        TransferHelper.safeTransferFrom(
            path[0], msg.sender, UniswapV2Library.pairFor(factory, path[0], path[1]), amounts[0]
        );
        _swap(amounts, path, address(this));
        IWETH(WETH).withdraw(amounts[amounts.length - 1]);
        TransferHelper.safeTransferETH(to, amounts[amounts.length - 1]);
    }
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        virtual
        override
        payable
        ensure(deadline)
        returns (uint[] memory amounts)
    {
        require(path[0] == WETH, 'UniswapV2Router: INVALID_PATH');
        amounts = UniswapV2Library.getAmountsIn(factory, amountOut, path);
        require(amounts[0] <= msg.value, 'UniswapV2Router: EXCESSIVE_INPUT_AMOUNT');
        IWETH(WETH).deposit{value: amounts[0]}();
        assert(IWETH(WETH).transfer(UniswapV2Library.pairFor(factory, path[0], path[1]), amounts[0]));
        _swap(amounts, path, to);
        // refund dust eth, if any
        if (msg.value > amounts[0]) TransferHelper.safeTransferETH(msg.sender, msg.value - amounts[0]);
    }

    // **** SWAP (supporting fee-on-transfer tokens) ****
    // requires the initial amount to have already been sent to the first pair
    function _swapSupportingFeeOnTransferTokens(address[] memory path, address _to) internal virtual {
        for (uint i; i < path.length - 1; i++) {
            (address input, address output) = (path[i], path[i + 1]);
            (address token0,) = UniswapV2Library.sortTokens(input, output);
            IUniswapV2Pair pair = IUniswapV2Pair(UniswapV2Library.pairFor(factory, input, output));
            uint amountInput;
            uint amountOutput;
            { // scope to avoid stack too deep errors
            (uint reserve0, uint reserve1,) = pair.getReserves();
            (uint reserveInput, uint reserveOutput) = input == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
            amountInput = IERC20Uniswap(input).balanceOf(address(pair)).sub(reserveInput);
            amountOutput = UniswapV2Library.getAmountOut(amountInput, reserveInput, reserveOutput);
            }
            (uint amount0Out, uint amount1Out) = input == token0 ? (uint(0), amountOutput) : (amountOutput, uint(0));
            address to = i < path.length - 2 ? UniswapV2Library.pairFor(factory, output, path[i + 2]) : _to;
            pair.swap(amount0Out, amount1Out, to, new bytes(0));
        }
    }
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external virtual override ensure(deadline) {
        TransferHelper.safeTransferFrom(
            path[0], msg.sender, UniswapV2Library.pairFor(factory, path[0], path[1]), amountIn
        );
        uint balanceBefore = IERC20Uniswap(path[path.length - 1]).balanceOf(to);
        _swapSupportingFeeOnTransferTokens(path, to);
        require(
            IERC20Uniswap(path[path.length - 1]).balanceOf(to).sub(balanceBefore) >= amountOutMin,
            'UniswapV2Router: INSUFFICIENT_OUTPUT_AMOUNT'
        );
    }
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    )
        external
        virtual
        override
        payable
        ensure(deadline)
    {
        require(path[0] == WETH, 'UniswapV2Router: INVALID_PATH');
        uint amountIn = msg.value;
        IWETH(WETH).deposit{value: amountIn}();
        assert(IWETH(WETH).transfer(UniswapV2Library.pairFor(factory, path[0], path[1]), amountIn));
        uint balanceBefore = IERC20Uniswap(path[path.length - 1]).balanceOf(to);
        _swapSupportingFeeOnTransferTokens(path, to);
        require(
            IERC20Uniswap(path[path.length - 1]).balanceOf(to).sub(balanceBefore) >= amountOutMin,
            'UniswapV2Router: INSUFFICIENT_OUTPUT_AMOUNT'
        );
    }
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    )
        external
        virtual
        override
        ensure(deadline)
    {
        require(path[path.length - 1] == WETH, 'UniswapV2Router: INVALID_PATH');
        TransferHelper.safeTransferFrom(
            path[0], msg.sender, UniswapV2Library.pairFor(factory, path[0], path[1]), amountIn
        );
        _swapSupportingFeeOnTransferTokens(path, address(this));
        uint amountOut = IERC20Uniswap(WETH).balanceOf(address(this));
        require(amountOut >= amountOutMin, 'UniswapV2Router: INSUFFICIENT_OUTPUT_AMOUNT');
        IWETH(WETH).withdraw(amountOut);
        TransferHelper.safeTransferETH(to, amountOut);
    }

    // **** LIBRARY FUNCTIONS ****
    function quote(uint amountA, uint reserveA, uint reserveB) public pure virtual override returns (uint amountB) {
        return UniswapV2Library.quote(amountA, reserveA, reserveB);
    }

    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut)
        public
        pure
        virtual
        override
        returns (uint amountOut)
    {
        return UniswapV2Library.getAmountOut(amountIn, reserveIn, reserveOut);
    }

    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut)
        public
        pure
        virtual
        override
        returns (uint amountIn)
    {
        return UniswapV2Library.getAmountIn(amountOut, reserveIn, reserveOut);
    }

    function getAmountsOut(uint amountIn, address[] memory path)
        public
        view
        virtual
        override
        returns (uint[] memory amounts)
    {
        return UniswapV2Library.getAmountsOut(factory, amountIn, path);
    }

    function getAmountsIn(uint amountOut, address[] memory path)
        public
        view
        virtual
        override
        returns (uint[] memory amounts)
    {
        return UniswapV2Library.getAmountsIn(factory, amountOut, path);
    }
}

pragma solidity >=0.5.0 <0.7.0;

/// @title SelfAuthorized - authorizes current contract to perform actions
/// @author Richard Meissner - <[email protected]>
contract SelfAuthorized {
    modifier authorized() {
        require(msg.sender == address(this), "Method can only be called from this contract");
        _;
    }
}



/// @title MasterCopy - Base for master copy contracts (should always be first super contract)
///         This contract is tightly coupled to our proxy contract (see `proxies/Proxy.sol`)
/// @author Richard Meissner - <[email protected]>
contract MasterCopy is SelfAuthorized {

    event ChangedMasterCopy(address masterCopy);

    // masterCopy always needs to be first declared variable, to ensure that it is at the same location as in the Proxy contract.
    // It should also always be ensured that the address is stored alone (uses a full word)
    address private masterCopy;

    /// @dev Allows to upgrade the contract. This can only be done via a Safe transaction.
    /// @param _masterCopy New contract address.
    function changeMasterCopy(address _masterCopy)
        public
        authorized
    {
        // Master copy address cannot be null.
        require(_masterCopy != address(0), "Invalid master copy address provided");
        masterCopy = _masterCopy;
        emit ChangedMasterCopy(_masterCopy);
    }
}


/// @title Module - Base class for modules.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract Module is MasterCopy {

    ModuleManager public manager;

    modifier authorized() {
        require(msg.sender == address(manager), "Method can only be called from manager");
        _;
    }

    function setManager()
        internal
    {
        // manager can only be 0 at initalization of contract.
        // Check ensures that setup function can only be called once.
        require(address(manager) == address(0), "Manager has already been set");
        manager = ModuleManager(msg.sender);
    }
}





/// @title Enum - Collection of enums
/// @author Richard Meissner - <[email protected]>
contract Enum {
    enum Operation {
        Call,
        DelegateCall
    }
}





/// @title Executor - A contract that can execute transactions
/// @author Richard Meissner - <[email protected]>
contract Executor {

    function execute(address to, uint256 value, bytes memory data, Enum.Operation operation, uint256 txGas)
        internal
        returns (bool success)
    {
        if (operation == Enum.Operation.Call)
            success = executeCall(to, value, data, txGas);
        else if (operation == Enum.Operation.DelegateCall)
            success = executeDelegateCall(to, data, txGas);
        else
            success = false;
    }

    function executeCall(address to, uint256 value, bytes memory data, uint256 txGas)
        internal
        returns (bool success)
    {
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            success := call(txGas, to, value, add(data, 0x20), mload(data), 0, 0)
        }
    }

    function executeDelegateCall(address to, bytes memory data, uint256 txGas)
        internal
        returns (bool success)
    {
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            success := delegatecall(txGas, to, add(data, 0x20), mload(data), 0, 0)
        }
    }
}



/// @title SecuredTokenTransfer - Secure token transfer
/// @author Richard Meissner - <[email protected]>
contract SecuredTokenTransfer {

    /// @dev Transfers a token and returns if it was a success
    /// @param token Token that should be transferred
    /// @param receiver Receiver to whom the token should be transferred
    /// @param amount The amount of tokens that should be transferred
    function transferToken (
        address token,
        address receiver,
        uint256 amount
    )
        internal
        returns (bool transferred)
    {
        bytes memory data = abi.encodeWithSignature("transfer(address,uint256)", receiver, amount);
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            let success := call(sub(gas, 10000), token, 0, add(data, 0x20), mload(data), 0, 0)
            let ptr := mload(0x40)
            mstore(0x40, add(ptr, returndatasize()))
            returndatacopy(ptr, 0, returndatasize())
            switch returndatasize()
            case 0 { transferred := success }
            case 0x20 { transferred := iszero(or(iszero(success), iszero(mload(ptr)))) }
            default { transferred := 0 }
        }
    }
}










/// @title Module Manager - A contract that manages modules that can execute transactions via this contract
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract ModuleManager is SelfAuthorized, Executor {

    event EnabledModule(Module module);
    event DisabledModule(Module module);
    event ExecutionFromModuleSuccess(address indexed module);
    event ExecutionFromModuleFailure(address indexed module);

    address internal constant SENTINEL_MODULES = address(0x1);

    mapping (address => address) internal modules;

    function setupModules(address to, bytes memory data)
        internal
    {
        require(modules[SENTINEL_MODULES] == address(0), "Modules have already been initialized");
        modules[SENTINEL_MODULES] = SENTINEL_MODULES;
        if (to != address(0))
            // Setup has to complete successfully or transaction fails.
            require(executeDelegateCall(to, data, gasleft()), "Could not finish initialization");
    }

    /// @dev Allows to add a module to the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @param module Module to be whitelisted.
    function enableModule(Module module)
        public
        authorized
    {
        // Module address cannot be null or sentinel.
        require(address(module) != address(0) && address(module) != SENTINEL_MODULES, "Invalid module address provided");
        // Module cannot be added twice.
        require(modules[address(module)] == address(0), "Module has already been added");
        modules[address(module)] = modules[SENTINEL_MODULES];
        modules[SENTINEL_MODULES] = address(module);
        emit EnabledModule(module);
    }

    /// @dev Allows to remove a module from the whitelist.
    ///      This can only be done via a Safe transaction.
    /// @param prevModule Module that pointed to the module to be removed in the linked list
    /// @param module Module to be removed.
    function disableModule(Module prevModule, Module module)
        public
        authorized
    {
        // Validate module address and check that it corresponds to module index.
        require(address(module) != address(0) && address(module) != SENTINEL_MODULES, "Invalid module address provided");
        require(modules[address(prevModule)] == address(module), "Invalid prevModule, module pair provided");
        modules[address(prevModule)] = modules[address(module)];
        modules[address(module)] = address(0);
        emit DisabledModule(module);
    }

    /// @dev Allows a Module to execute a Safe transaction without any further confirmations.
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModule(address to, uint256 value, bytes memory data, Enum.Operation operation)
        public
        returns (bool success)
    {
        // Only whitelisted modules are allowed.
        require(msg.sender != SENTINEL_MODULES && modules[msg.sender] != address(0), "Method can only be called from an enabled module");
        // Execute transaction without further confirmations.
        success = execute(to, value, data, operation, gasleft());
        if (success) emit ExecutionFromModuleSuccess(msg.sender);
        else emit ExecutionFromModuleFailure(msg.sender);
    }

    /// @dev Allows a Module to execute a Safe transaction without any further confirmations and return data
    /// @param to Destination address of module transaction.
    /// @param value Ether value of module transaction.
    /// @param data Data payload of module transaction.
    /// @param operation Operation type of module transaction.
    function execTransactionFromModuleReturnData(address to, uint256 value, bytes memory data, Enum.Operation operation)
        public
        returns (bool success, bytes memory returnData)
    {
        success = execTransactionFromModule(to, value, data, operation);
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            // Load free memory location
            let ptr := mload(0x40)
            // We allocate memory for the return data by setting the free memory location to
            // current free memory location + data size + 32 bytes for data size value
            mstore(0x40, add(ptr, add(returndatasize(), 0x20)))
            // Store the size
            mstore(ptr, returndatasize())
            // Store the data
            returndatacopy(add(ptr, 0x20), 0, returndatasize())
            // Point the return data to the correct memory location
            returnData := ptr
        }
    }

    /// @dev Returns array of first 10 modules.
    /// @return Array of modules.
    function getModules()
        public
        view
        returns (address[] memory)
    {
        (address[] memory array,) = getModulesPaginated(SENTINEL_MODULES, 10);
        return array;
    }

    /// @dev Returns array of modules.
    /// @param start Start of the page.
    /// @param pageSize Maximum number of modules that should be returned.
    /// @return Array of modules.
    function getModulesPaginated(address start, uint256 pageSize)
        public
        view
        returns (address[] memory array, address next)
    {
        // Init array with max page size
        array = new address[](pageSize);

        // Populate return array
        uint256 moduleCount = 0;
        address currentModule = modules[start];
        while(currentModule != address(0x0) && currentModule != SENTINEL_MODULES && moduleCount < pageSize) {
            array[moduleCount] = currentModule;
            currentModule = modules[currentModule];
            moduleCount++;
        }
        next = currentModule;
        // Set correct size of returned array
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            mstore(array, moduleCount)
        }
    }
}




/// @title OwnerManager - Manages a set of owners and a threshold to perform actions.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
contract OwnerManager is SelfAuthorized {

    event AddedOwner(address owner);
    event RemovedOwner(address owner);
    event ChangedThreshold(uint256 threshold);

    address internal constant SENTINEL_OWNERS = address(0x1);

    mapping(address => address) internal owners;
    uint256 ownerCount;
    uint256 internal threshold;

    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    function setupOwners(address[] memory _owners, uint256 _threshold)
        internal
    {
        // Threshold can only be 0 at initialization.
        // Check ensures that setup function can only be called once.
        require(threshold == 0, "Owners have already been setup");
        // Validate that threshold is smaller than number of added owners.
        require(_threshold <= _owners.length, "Threshold cannot exceed owner count");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "Threshold needs to be greater than 0");
        // Initializing Safe owners.
        address currentOwner = SENTINEL_OWNERS;
        for (uint256 i = 0; i < _owners.length; i++) {
            // Owner address cannot be null.
            address owner = _owners[i];
            require(owner != address(0) && owner != SENTINEL_OWNERS, "Invalid owner address provided");
            // No duplicate owners allowed.
            require(owners[owner] == address(0), "Duplicate owner address provided");
            owners[currentOwner] = owner;
            currentOwner = owner;
        }
        owners[currentOwner] = SENTINEL_OWNERS;
        ownerCount = _owners.length;
        threshold = _threshold;
    }

    /// @dev Allows to add a new owner to the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @param owner New owner address.
    /// @param _threshold New threshold.
    function addOwnerWithThreshold(address owner, uint256 _threshold)
        public
        authorized
    {
        // Owner address cannot be null.
        require(owner != address(0) && owner != SENTINEL_OWNERS, "Invalid owner address provided");
        // No duplicate owners allowed.
        require(owners[owner] == address(0), "Address is already an owner");
        owners[owner] = owners[SENTINEL_OWNERS];
        owners[SENTINEL_OWNERS] = owner;
        ownerCount++;
        emit AddedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold)
            changeThreshold(_threshold);
    }

    /// @dev Allows to remove an owner from the Safe and update the threshold at the same time.
    ///      This can only be done via a Safe transaction.
    /// @param prevOwner Owner that pointed to the owner to be removed in the linked list
    /// @param owner Owner address to be removed.
    /// @param _threshold New threshold.
    function removeOwner(address prevOwner, address owner, uint256 _threshold)
        public
        authorized
    {
        // Only allow to remove an owner, if threshold can still be reached.
        require(ownerCount - 1 >= _threshold, "New owner count needs to be larger than new threshold");
        // Validate owner address and check that it corresponds to owner index.
        require(owner != address(0) && owner != SENTINEL_OWNERS, "Invalid owner address provided");
        require(owners[prevOwner] == owner, "Invalid prevOwner, owner pair provided");
        owners[prevOwner] = owners[owner];
        owners[owner] = address(0);
        ownerCount--;
        emit RemovedOwner(owner);
        // Change threshold if threshold was changed.
        if (threshold != _threshold)
            changeThreshold(_threshold);
    }

    /// @dev Allows to swap/replace an owner from the Safe with another address.
    ///      This can only be done via a Safe transaction.
    /// @param prevOwner Owner that pointed to the owner to be replaced in the linked list
    /// @param oldOwner Owner address to be replaced.
    /// @param newOwner New owner address.
    function swapOwner(address prevOwner, address oldOwner, address newOwner)
        public
        authorized
    {
        // Owner address cannot be null.
        require(newOwner != address(0) && newOwner != SENTINEL_OWNERS, "Invalid owner address provided");
        // No duplicate owners allowed.
        require(owners[newOwner] == address(0), "Address is already an owner");
        // Validate oldOwner address and check that it corresponds to owner index.
        require(oldOwner != address(0) && oldOwner != SENTINEL_OWNERS, "Invalid owner address provided");
        require(owners[prevOwner] == oldOwner, "Invalid prevOwner, owner pair provided");
        owners[newOwner] = owners[oldOwner];
        owners[prevOwner] = newOwner;
        owners[oldOwner] = address(0);
        emit RemovedOwner(oldOwner);
        emit AddedOwner(newOwner);
    }

    /// @dev Allows to update the number of required confirmations by Safe owners.
    ///      This can only be done via a Safe transaction.
    /// @param _threshold New threshold.
    function changeThreshold(uint256 _threshold)
        public
        authorized
    {
        // Validate that threshold is smaller than number of owners.
        require(_threshold <= ownerCount, "Threshold cannot exceed owner count");
        // There has to be at least one Safe owner.
        require(_threshold >= 1, "Threshold needs to be greater than 0");
        threshold = _threshold;
        emit ChangedThreshold(threshold);
    }

    function getThreshold()
        public
        view
        returns (uint256)
    {
        return threshold;
    }

    function isOwner(address owner)
        public
        view
        returns (bool)
    {
        return owner != SENTINEL_OWNERS && owners[owner] != address(0);
    }

    /// @dev Returns array of owners.
    /// @return Array of Safe owners.
    function getOwners()
        public
        view
        returns (address[] memory)
    {
        address[] memory array = new address[](ownerCount);

        // populate return array
        uint256 index = 0;
        address currentOwner = owners[SENTINEL_OWNERS];
        while(currentOwner != SENTINEL_OWNERS) {
            array[index] = currentOwner;
            currentOwner = owners[currentOwner];
            index ++;
        }
        return array;
    }
}





/// @title Fallback Manager - A contract that manages fallback calls made to this contract
/// @author Richard Meissner - <[email protected]>
contract FallbackManager is SelfAuthorized {

    // keccak256("fallback_manager.handler.address")
    bytes32 internal constant FALLBACK_HANDLER_STORAGE_SLOT = 0x6c9a6c4a39284e37ed1cf53d337577d14212a4870fb976a4366c693b939918d5;

    function internalSetFallbackHandler(address handler) internal {
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            sstore(slot, handler)
        }
    }

    /// @dev Allows to add a contract to handle fallback calls.
    ///      Only fallback calls without value and with data will be forwarded.
    ///      This can only be done via a Safe transaction.
    /// @param handler contract to handle fallbacks calls.
    function setFallbackHandler(address handler)
        public
        authorized
    {
        internalSetFallbackHandler(handler);
    }

    function ()
        external
        payable
    {
        // Only calls without value and with data will be forwarded
        if (msg.value > 0 || msg.data.length == 0) {
            return;
        }
        bytes32 slot = FALLBACK_HANDLER_STORAGE_SLOT;
        address handler;
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            handler := sload(slot)
        }

        if (handler != address(0)) {
            // solium-disable-next-line security/no-inline-assembly
            assembly {
                calldatacopy(0, 0, calldatasize())
                let success := call(gas, handler, 0, 0, calldatasize(), 0, 0)
                returndatacopy(0, 0, returndatasize())
                if eq(success, 0) { revert(0, returndatasize()) }
                return(0, returndatasize())
            }
        }
    }
}







/// @title SignatureDecoder - Decodes signatures that a encoded as bytes
/// @author Ricardo Guilherme Schmidt (Status Research & Development GmbH)
/// @author Richard Meissner - <[email protected]>
contract SignatureDecoder {
    
    /// @dev Recovers address who signed the message
    /// @param messageHash operation ethereum signed message hash
    /// @param messageSignature message `txHash` signature
    /// @param pos which signature to read
    function recoverKey (
        bytes32 messageHash,
        bytes memory messageSignature,
        uint256 pos
    )
        internal
        pure
        returns (address)
    {
        uint8 v;
        bytes32 r;
        bytes32 s;
        (v, r, s) = signatureSplit(messageSignature, pos);
        return ecrecover(messageHash, v, r, s);
    }

    /// @dev divides bytes signature into `uint8 v, bytes32 r, bytes32 s`.
    /// @notice Make sure to peform a bounds check for @param pos, to avoid out of bounds access on @param signatures
    /// @param pos which signature to read. A prior bounds check of this parameter should be performed, to avoid out of bounds access
    /// @param signatures concatenated rsv signatures
    function signatureSplit(bytes memory signatures, uint256 pos)
        internal
        pure
        returns (uint8 v, bytes32 r, bytes32 s)
    {
        // The signature format is a compact form of:
        //   {bytes32 r}{bytes32 s}{uint8 v}
        // Compact means, uint8 is not padded to 32 bytes.
        // solium-disable-next-line security/no-inline-assembly
        assembly {
            let signaturePos := mul(0x41, pos)
            r := mload(add(signatures, add(signaturePos, 0x20)))
            s := mload(add(signatures, add(signaturePos, 0x40)))
            // Here we are loading the last 32 bytes, including 31 bytes
            // of 's'. There is no 'mload8' to do this.
            //
            // 'byte' is not working due to the Solidity parser, so lets
            // use the second best option, 'and'
            v := and(mload(add(signatures, add(signaturePos, 0x41))), 0xff)
        }
    }
}




contract ISignatureValidatorConstants {
    // bytes4(keccak256("isValidSignature(bytes,bytes)")
    bytes4 constant internal EIP1271_MAGIC_VALUE = 0x20c13b0b;
}

contract ISignatureValidator is ISignatureValidatorConstants {

    /**
    * @dev Should return whether the signature provided is valid for the provided data
    * @param _data Arbitrary length data signed on the behalf of address(this)
    * @param _signature Signature byte array associated with _data
    *
    * MUST return the bytes4 magic value 0x20c13b0b when function passes.
    * MUST NOT modify state (using STATICCALL for solc < 0.5, view modifier for solc > 0.5)
    * MUST allow external calls
    */
    function isValidSignature(
        bytes memory _data,
        bytes memory _signature)
        public
        view
        returns (bytes4);
}


/**
 * @title SafeMath
 * @dev Math operations with safety checks that revert on error
 * TODO: remove once open zeppelin update to solc 0.5.0
 */
library SafeMath {

  /**
  * @dev Multiplies two numbers, reverts on overflow.
  */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (a == 0) {
      return 0;
    }

    uint256 c = a * b;
    require(c / a == b);

    return c;
  }

  /**
  * @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
  */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b > 0); // Solidity only automatically asserts when dividing by 0
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold

    return c;
  }

  /**
  * @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b <= a);
    uint256 c = a - b;

    return c;
  }

  /**
  * @dev Adds two numbers, reverts on overflow.
  */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a);

    return c;
  }

  /**
  * @dev Divides two numbers and returns the remainder (unsigned integer modulo),
  * reverts when dividing by zero.
  */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b != 0);
    return a % b;
  }
}

/// @title Gnosis Safe - A multisignature wallet with support for confirmations using signed messages based on ERC191.
/// @author Stefan George - <[email protected]>
/// @author Richard Meissner - <[email protected]>
/// @author Ricardo Guilherme Schmidt - (Status Research & Development GmbH) - Gas Token Payment
contract GnosisSafe
    is MasterCopy, ModuleManager, OwnerManager, SignatureDecoder, SecuredTokenTransfer, ISignatureValidatorConstants, FallbackManager {

    using SafeMath for uint256;

    string public constant NAME = "Gnosis Safe";
    string public constant VERSION = "1.1.1";

    //keccak256(
    //    "EIP712Domain(address verifyingContract)"
    //);
    bytes32 private constant DOMAIN_SEPARATOR_TYPEHASH = 0x035aff83d86937d35b32e04f0ddc6ff469290eef2f1b692d8a815c89404d4749;

    //keccak256(
    //    "SafeTx(address to,uint256 value,bytes data,uint8 operation,uint256 safeTxGas,uint256 baseGas,uint256 gasPrice,address gasToken,address refundReceiver,uint256 nonce)"
    //);
    bytes32 private constant SAFE_TX_TYPEHASH = 0xbb8310d486368db6bd6f849402fdd73ad53d316b5a4b2644ad6efe0f941286d8;

    //keccak256(
    //    "SafeMessage(bytes message)"
    //);
    bytes32 private constant SAFE_MSG_TYPEHASH = 0x60b3cbf8b4a223d68d641b3b6ddf9a298e7f33710cf3d3a9d1146b5a6150fbca;

    event ApproveHash(
        bytes32 indexed approvedHash,
        address indexed owner
    );
    event SignMsg(
        bytes32 indexed msgHash
    );
    event ExecutionFailure(
        bytes32 txHash, uint256 payment
    );
    event ExecutionSuccess(
        bytes32 txHash, uint256 payment
    );

    uint256 public nonce;
    bytes32 public domainSeparator;
    // Mapping to keep track of all message hashes that have been approve by ALL REQUIRED owners
    mapping(bytes32 => uint256) public signedMessages;
    // Mapping to keep track of all hashes (message or transaction) that have been approve by ANY owners
    mapping(address => mapping(bytes32 => uint256)) public approvedHashes;

    // This constructor ensures that this contract can only be used as a master copy for Proxy contracts
    constructor() public {
        // By setting the threshold it is not possible to call setup anymore,
        // so we create a Safe with 0 owners and threshold 1.
        // This is an unusable Safe, perfect for the mastercopy
        threshold = 1;
    }

    /// @dev Setup function sets initial storage of contract.
    /// @param _owners List of Safe owners.
    /// @param _threshold Number of required confirmations for a Safe transaction.
    /// @param to Contract address for optional delegate call.
    /// @param data Data payload for optional delegate call.
    /// @param fallbackHandler Handler for fallback calls to this contract
    /// @param paymentToken Token that should be used for the payment (0 is ETH)
    /// @param payment Value that should be paid
    /// @param paymentReceiver Adddress that should receive the payment (or 0 if tx.origin)
    function setup(
        address[] calldata _owners,
        uint256 _threshold,
        address to,
        bytes calldata data,
        address fallbackHandler,
        address paymentToken,
        uint256 payment,
        address payable paymentReceiver
    )
        external
    {
        require(domainSeparator == 0, "Domain Separator already set!");
        domainSeparator = keccak256(abi.encode(DOMAIN_SEPARATOR_TYPEHASH, this));
        setupOwners(_owners, _threshold);
        if (fallbackHandler != address(0)) internalSetFallbackHandler(fallbackHandler);
        // As setupOwners can only be called if the contract has not been initialized we don't need a check for setupModules
        setupModules(to, data);

        if (payment > 0) {
            // To avoid running into issues with EIP-170 we reuse the handlePayment function (to avoid adjusting code of that has been verified we do not adjust the method itself)
            // baseGas = 0, gasPrice = 1 and gas = payment => amount = (payment + 0) * 1 = payment
            handlePayment(payment, 0, 1, paymentToken, paymentReceiver);
        }
    }

    /// @dev Allows to execute a Safe transaction confirmed by required number of owners and then pays the account that submitted the transaction.
    ///      Note: The fees are always transfered, even if the user transaction fails.
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @param safeTxGas Gas that should be used for the Safe transaction.
    /// @param baseGas Gas costs for that are indipendent of the transaction execution(e.g. base transaction fee, signature check, payment of the refund)
    /// @param gasPrice Gas price that should be used for the payment calculation.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param signatures Packed signature data ({bytes32 r}{bytes32 s}{uint8 v})
    function execTransaction(
        address to,
        uint256 value,
        bytes calldata data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver,
        bytes calldata signatures
    )
        external
        returns (bool success)
    {
        bytes32 txHash;
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            bytes memory txHashData = encodeTransactionData(
                to, value, data, operation, // Transaction info
                safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, // Payment info
                nonce
            );
            // Increase nonce and execute transaction.
            nonce++;
            txHash = keccak256(txHashData);
            checkSignatures(txHash, txHashData, signatures, true);
        }
        require(gasleft() >= safeTxGas, "Not enough gas to execute safe transaction");
        // Use scope here to limit variable lifetime and prevent `stack too deep` errors
        {
            uint256 gasUsed = gasleft();
            // If no safeTxGas has been set and the gasPrice is 0 we assume that all available gas can be used
            success = execute(to, value, data, operation, safeTxGas == 0 && gasPrice == 0 ? gasleft() : safeTxGas);
            gasUsed = gasUsed.sub(gasleft());
            // We transfer the calculated tx costs to the tx.origin to avoid sending it to intermediate contracts that have made calls
            uint256 payment = 0;
            if (gasPrice > 0) {
                payment = handlePayment(gasUsed, baseGas, gasPrice, gasToken, refundReceiver);
            }
            if (success) emit ExecutionSuccess(txHash, payment);
            else emit ExecutionFailure(txHash, payment);
        }
    }

    function handlePayment(
        uint256 gasUsed,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address payable refundReceiver
    )
        private
        returns (uint256 payment)
    {
        // solium-disable-next-line security/no-tx-origin
        address payable receiver = refundReceiver == address(0) ? tx.origin : refundReceiver;
        if (gasToken == address(0)) {
            // For ETH we will only adjust the gas price to not be higher than the actual used gas price
            payment = gasUsed.add(baseGas).mul(gasPrice < tx.gasprice ? gasPrice : tx.gasprice);
            // solium-disable-next-line security/no-send
            require(receiver.send(payment), "Could not pay gas costs with ether");
        } else {
            payment = gasUsed.add(baseGas).mul(gasPrice);
            require(transferToken(gasToken, receiver, payment), "Could not pay gas costs with token");
        }
    }

    /**
    * @dev Checks whether the signature provided is valid for the provided data, hash. Will revert otherwise.
    * @param dataHash Hash of the data (could be either a message hash or transaction hash)
    * @param data That should be signed (this is passed to an external validator contract)
    * @param signatures Signature data that should be verified. Can be ECDSA signature, contract signature (EIP-1271) or approved hash.
    * @param consumeHash Indicates that in case of an approved hash the storage can be freed to save gas
    */
    function checkSignatures(bytes32 dataHash, bytes memory data, bytes memory signatures, bool consumeHash)
        internal
    {
        // Load threshold to avoid multiple storage loads
        uint256 _threshold = threshold;
        // Check that a threshold is set
        require(_threshold > 0, "Threshold needs to be defined!");
        // Check that the provided signature data is not too short
        require(signatures.length >= _threshold.mul(65), "Signatures data too short");
        // There cannot be an owner with address 0.
        address lastOwner = address(0);
        address currentOwner;
        uint8 v;
        bytes32 r;
        bytes32 s;
        uint256 i;
        for (i = 0; i < _threshold; i++) {
            (v, r, s) = signatureSplit(signatures, i);
            // If v is 0 then it is a contract signature
            if (v == 0) {
                // When handling contract signatures the address of the contract is encoded into r
                currentOwner = address(uint256(r));

                // Check that signature data pointer (s) is not pointing inside the static part of the signatures bytes
                // This check is not completely accurate, since it is possible that more signatures than the threshold are send.
                // Here we only check that the pointer is not pointing inside the part that is being processed
                require(uint256(s) >= _threshold.mul(65), "Invalid contract signature location: inside static part");

                // Check that signature data pointer (s) is in bounds (points to the length of data -> 32 bytes)
                require(uint256(s).add(32) <= signatures.length, "Invalid contract signature location: length not present");

                // Check if the contract signature is in bounds: start of data is s + 32 and end is start + signature length
                uint256 contractSignatureLen;
                // solium-disable-next-line security/no-inline-assembly
                assembly {
                    contractSignatureLen := mload(add(add(signatures, s), 0x20))
                }
                require(uint256(s).add(32).add(contractSignatureLen) <= signatures.length, "Invalid contract signature location: data not complete");

                // Check signature
                bytes memory contractSignature;
                // solium-disable-next-line security/no-inline-assembly
                assembly {
                    // The signature data for contract signatures is appended to the concatenated signatures and the offset is stored in s
                    contractSignature := add(add(signatures, s), 0x20)
                }
                require(ISignatureValidator(currentOwner).isValidSignature(data, contractSignature) == EIP1271_MAGIC_VALUE, "Invalid contract signature provided");
            // If v is 1 then it is an approved hash
            } else if (v == 1) {
                // When handling approved hashes the address of the approver is encoded into r
                currentOwner = address(uint256(r));
                // Hashes are automatically approved by the sender of the message or when they have been pre-approved via a separate transaction
                require(msg.sender == currentOwner || approvedHashes[currentOwner][dataHash] != 0, "Hash has not been approved");
                // Hash has been marked for consumption. If this hash was pre-approved free storage
                if (consumeHash && msg.sender != currentOwner) {
                    approvedHashes[currentOwner][dataHash] = 0;
                }
            } else if (v > 30) {
                // To support eth_sign and similar we adjust v and hash the messageHash with the Ethereum message prefix before applying ecrecover
                currentOwner = ecrecover(keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", dataHash)), v - 4, r, s);
            } else {
                // Use ecrecover with the messageHash for EOA signatures
                currentOwner = ecrecover(dataHash, v, r, s);
            }
            require (
                currentOwner > lastOwner && owners[currentOwner] != address(0) && currentOwner != SENTINEL_OWNERS,
                "Invalid owner provided"
            );
            lastOwner = currentOwner;
        }
    }

    /// @dev Allows to estimate a Safe transaction.
    ///      This method is only meant for estimation purpose, therefore two different protection mechanism against execution in a transaction have been made:
    ///      1.) The method can only be called from the safe itself
    ///      2.) The response is returned with a revert
    ///      When estimating set `from` to the address of the safe.
    ///      Since the `estimateGas` function includes refunds, call this method to get an estimated of the costs that are deducted from the safe with `execTransaction`
    /// @param to Destination address of Safe transaction.
    /// @param value Ether value of Safe transaction.
    /// @param data Data payload of Safe transaction.
    /// @param operation Operation type of Safe transaction.
    /// @return Estimate without refunds and overhead fees (base transaction and payload data gas costs).
    function requiredTxGas(address to, uint256 value, bytes calldata data, Enum.Operation operation)
        external
        authorized
        returns (uint256)
    {
        uint256 startGas = gasleft();
        // We don't provide an error message here, as we use it to return the estimate
        // solium-disable-next-line error-reason
        require(execute(to, value, data, operation, gasleft()));
        uint256 requiredGas = startGas - gasleft();
        // Convert response to string and return via error message
        revert(string(abi.encodePacked(requiredGas)));
    }

    /**
    * @dev Marks a hash as approved. This can be used to validate a hash that is used by a signature.
    * @param hashToApprove The hash that should be marked as approved for signatures that are verified by this contract.
    */
    function approveHash(bytes32 hashToApprove)
        external
    {
        require(owners[msg.sender] != address(0), "Only owners can approve a hash");
        approvedHashes[msg.sender][hashToApprove] = 1;
        emit ApproveHash(hashToApprove, msg.sender);
    }

    /**
    * @dev Marks a message as signed
    * @param _data Arbitrary length data that should be marked as signed on the behalf of address(this)
    */
    function signMessage(bytes calldata _data)
        external
        authorized
    {
        bytes32 msgHash = getMessageHash(_data);
        signedMessages[msgHash] = 1;
        emit SignMsg(msgHash);
    }

    /**
    * Implementation of ISignatureValidator (see `interfaces/ISignatureValidator.sol`)
    * @dev Should return whether the signature provided is valid for the provided data.
    *       The save does not implement the interface since `checkSignatures` is not a view method.
    *       The method will not perform any state changes (see parameters of `checkSignatures`)
    * @param _data Arbitrary length data signed on the behalf of address(this)
    * @param _signature Signature byte array associated with _data
    * @return a bool upon valid or invalid signature with corresponding _data
    */
    function isValidSignature(bytes calldata _data, bytes calldata _signature)
        external
        returns (bytes4)
    {
        bytes32 messageHash = getMessageHash(_data);
        if (_signature.length == 0) {
            require(signedMessages[messageHash] != 0, "Hash not approved");
        } else {
            // consumeHash needs to be false, as the state should not be changed
            checkSignatures(messageHash, _data, _signature, false);
        }
        return EIP1271_MAGIC_VALUE;
    }

    /// @dev Returns hash of a message that can be signed by owners.
    /// @param message Message that should be hashed
    /// @return Message hash.
    function getMessageHash(
        bytes memory message
    )
        public
        view
        returns (bytes32)
    {
        bytes32 safeMessageHash = keccak256(
            abi.encode(SAFE_MSG_TYPEHASH, keccak256(message))
        );
        return keccak256(
            abi.encodePacked(byte(0x19), byte(0x01), domainSeparator, safeMessageHash)
        );
    }

    /// @dev Returns the bytes that are hashed to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Fas that should be used for the safe transaction.
    /// @param baseGas Gas costs for data used to trigger the safe transaction.
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash bytes.
    function encodeTransactionData(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    )
        public
        view
        returns (bytes memory)
    {
        bytes32 safeTxHash = keccak256(
            abi.encode(SAFE_TX_TYPEHASH, to, value, keccak256(data), operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, _nonce)
        );
        return abi.encodePacked(byte(0x19), byte(0x01), domainSeparator, safeTxHash);
    }

    /// @dev Returns hash to be signed by owners.
    /// @param to Destination address.
    /// @param value Ether value.
    /// @param data Data payload.
    /// @param operation Operation type.
    /// @param safeTxGas Fas that should be used for the safe transaction.
    /// @param baseGas Gas costs for data used to trigger the safe transaction.
    /// @param gasPrice Maximum gas price that should be used for this transaction.
    /// @param gasToken Token address (or 0 if ETH) that is used for the payment.
    /// @param refundReceiver Address of receiver of gas payment (or 0 if tx.origin).
    /// @param _nonce Transaction nonce.
    /// @return Transaction hash.
    function getTransactionHash(
        address to,
        uint256 value,
        bytes memory data,
        Enum.Operation operation,
        uint256 safeTxGas,
        uint256 baseGas,
        uint256 gasPrice,
        address gasToken,
        address refundReceiver,
        uint256 _nonce
    )
        public
        view
        returns (bytes32)
    {
        return keccak256(encodeTransactionData(to, value, data, operation, safeTxGas, baseGas, gasPrice, gasToken, refundReceiver, _nonce));
    }
}