// File: @openzeppelin/contracts/proxy/Proxy.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        // solhint-disable-next-line no-inline-assembly
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/proxy/UpgradeableProxy.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 *
 * Upgradeability is only provided internally through {_upgradeTo}. For an externally upgradeable proxy see
 * {TransparentUpgradeableProxy}.
 */
contract UpgradeableProxy is Proxy {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) public payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _setImplementation(_logic);
        if (_data.length > 0) {
            Address.functionDelegateCall(_logic, _data);
        }
    }

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        bytes32 slot = _IMPLEMENTATION_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            impl := sload(slot)
        }
    }

    /**
     * @dev Upgrades the proxy to a new implementation.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal virtual {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "UpgradeableProxy: new implementation is not a contract");

        bytes32 slot = _IMPLEMENTATION_SLOT;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newImplementation)
        }
    }
}

// File: @openzeppelin/contracts/proxy/TransparentUpgradeableProxy.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev This contract implements a proxy that is upgradeable by an admin.
 *
 * To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
 * clashing], which can potentially be used in an attack, this contract uses the
 * https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
 * things that go hand in hand:
 *
 * 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
 * that call matches one of the admin functions exposed by the proxy itself.
 * 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
 * implementation. If the admin tries to call a function on the implementation it will fail with an error that says
 * "admin cannot fallback to proxy target".
 *
 * These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
 * the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
 * to sudden errors when trying to call a function from the proxy implementation.
 *
 * Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
 * you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
 */
contract TransparentUpgradeableProxy is UpgradeableProxy {
    /**
     * @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
     * optionally initialized with `_data` as explained in {UpgradeableProxy-constructor}.
     */
    constructor(
        address _logic,
        address admin_,
        bytes memory _data
    ) public payable UpgradeableProxy(_logic, _data) {
        assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
        _setAdmin(admin_);
    }

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 private constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
     */
    modifier ifAdmin() {
        if (msg.sender == _admin()) {
            _;
        } else {
            _fallback();
        }
    }

    /**
     * @dev Returns the current admin.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
     */
    function admin() external ifAdmin returns (address admin_) {
        admin_ = _admin();
    }

    /**
     * @dev Returns the current implementation.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
     *
     * TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
     * https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
     * `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
     */
    function implementation() external ifAdmin returns (address implementation_) {
        implementation_ = _implementation();
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
     */
    function changeAdmin(address newAdmin) external virtual ifAdmin {
        require(newAdmin != address(0), "TransparentUpgradeableProxy: new admin is the zero address");
        emit AdminChanged(_admin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev Upgrade the implementation of the proxy.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
     */
    function upgradeTo(address newImplementation) external virtual ifAdmin {
        _upgradeTo(newImplementation);
    }

    /**
     * @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
     * by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
     * proxied contract.
     *
     * NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
     */
    function upgradeToAndCall(address newImplementation, bytes calldata data) external payable virtual ifAdmin {
        _upgradeTo(newImplementation);
        Address.functionDelegateCall(newImplementation, data);
    }

    /**
     * @dev Returns the current admin.
     */
    function _admin() internal view virtual returns (address adm) {
        bytes32 slot = _ADMIN_SLOT;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            adm := sload(slot)
        }
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        bytes32 slot = _ADMIN_SLOT;

        // solhint-disable-next-line no-inline-assembly
        assembly {
            sstore(slot, newAdmin)
        }
    }

    /**
     * @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
     */
    function _beforeFallback() internal virtual override {
        require(msg.sender != _admin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
        super._beforeFallback();
    }
}

// File: contracts/OpenOceanExchangeProxy.sol

pragma solidity ^0.6.12;

contract OpenOceanExchangeProxy is TransparentUpgradeableProxy {
    constructor(
        address logic,
        address admin,
        bytes memory data
    ) public TransparentUpgradeableProxy(logic, admin, data) {}
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;
import "./OmnichainFungibleToken.sol";
contract StargateToken is OmnichainFungibleToken {
    constructor(
        string memory _name,
        string memory _symbol,
        address _endpoint,
        uint16 _mainEndpointId,
        uint256 _initialSupplyOnMainEndpoint
    ) OmnichainFungibleToken(_name, _symbol, _endpoint, _mainEndpointId, _initialSupplyOnMainEndpoint) {}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.7.6;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@layerzerolabs/contracts/contracts/interfaces/ILayerZeroEndpoint.sol";
import "@layerzerolabs/contracts/contracts/interfaces/ILayerZeroReceiver.sol";
import "@layerzerolabs/contracts/contracts/interfaces/ILayerZeroUserApplicationConfig.sol";
contract OmnichainFungibleToken is ERC20, Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    // the only endpointId these tokens will ever be minted on
    // required: the LayerZero endpoint which is passed in the constructor
    ILayerZeroEndpoint immutable public endpoint;
    // a map of our connected contracts
    mapping(uint16 => bytes) public dstContractLookup;
    // pause the sendTokens()
    bool public paused;
    bool public isMain;
    event Paused(bool isPaused);
    event SendToChain(uint16 dstChainId, bytes to, uint256 qty);
    event ReceiveFromChain(uint16 srcChainId, uint64 nonce, uint256 qty);
    constructor(
        string memory _name,
        string memory _symbol,
        address _endpoint,
        uint16 _mainChainId,
        uint256 initialSupplyOnMainEndpoint
    ) ERC20(_name, _symbol) {
        if (ILayerZeroEndpoint(_endpoint).getChainId() == _mainChainId) {
            _mint(msg.sender, initialSupplyOnMainEndpoint);
            isMain = true;
        }
        // set the LayerZero endpoint
        endpoint = ILayerZeroEndpoint(_endpoint);
    }
    function pauseSendTokens(bool _pause) external onlyOwner {
        paused = _pause;
        emit Paused(_pause);
    }
    function setDestination(uint16 _dstChainId, bytes calldata _destinationContractAddress) public onlyOwner {
        dstContractLookup[_dstChainId] = _destinationContractAddress;
    }
    function chainId() external view returns (uint16){
        return endpoint.getChainId();
    }
    function sendTokens(
        uint16 _dstChainId, // send tokens to this chainId
        bytes calldata _to, // where to deliver the tokens on the destination chain
        uint256 _qty, // how many tokens to send
        address zroPaymentAddress, // ZRO payment address
        bytes calldata adapterParam // txParameters
    ) public payable {
        require(!paused, "OFT: sendTokens() is currently paused");
        // lock if leaving the safe chain, otherwise burn
        if (isMain) {
            // ... transferFrom the tokens to this contract for locking purposes
            _transfer(msg.sender, address(this), _qty);
        } else {
            _burn(msg.sender, _qty);
        }
        // abi.encode() the payload with the values to send
        bytes memory payload = abi.encode(_to, _qty);
        // send LayerZero message
        endpoint.send{value: msg.value}(
            _dstChainId, // destination chainId
            dstContractLookup[_dstChainId], // destination UA address
            payload, // abi.encode()'ed bytes
            msg.sender, // refund address (LayerZero will refund any extra gas back to caller of send()
            zroPaymentAddress, // 'zroPaymentAddress' unused for this mock/example
            adapterParam // 'adapterParameters' unused for this mock/example
        );
        emit SendToChain(_dstChainId, _to, _qty);
    }
    function lzReceive(
        uint16 _srcChainId,
        bytes memory _fromAddress,
        uint64 nonce,
        bytes memory _payload
    ) external override {
        require(msg.sender == address(endpoint)); // boilerplate! lzReceive must be called by the endpoint for security
        require(
            _fromAddress.length == dstContractLookup[_srcChainId].length && keccak256(_fromAddress) == keccak256(dstContractLookup[_srcChainId]),
            "OFT: invalid source sending contract"
        );
        // decode
        (bytes memory _to, uint256 _qty) = abi.decode(_payload, (bytes, uint256));
        address toAddress;
        // load the toAddress from the bytes
        assembly {
            toAddress := mload(add(_to, 20))
        }
        // mint the tokens back into existence, to the receiving address
        if (isMain) {
            _transfer(address(this), toAddress, _qty);
        } else {
            _mint(toAddress, _qty);
        }
        emit ReceiveFromChain(_srcChainId, nonce, _qty);
    }
    function estimateSendTokensFee(uint16 _dstChainId, bool _useZro, bytes calldata txParameters) external view returns (uint256 nativeFee, uint256 zroFee) {
        return endpoint.estimateFees(_dstChainId, address(this), bytes(""), _useZro, txParameters);
    }
    //---------------------------DAO CALL----------------------------------------
    // generic config for user Application
    function setConfig(
        uint16 _version,
        uint16 _chainId,
        uint256 _configType,
        bytes calldata _config
    ) external override onlyOwner {
        endpoint.setConfig(_version, _chainId, _configType, _config);
    }
    function setSendVersion(uint16 version) external override onlyOwner {
        endpoint.setSendVersion(version);
    }
    function setReceiveVersion(uint16 version) external override onlyOwner {
        endpoint.setReceiveVersion(version);
    }
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        endpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }
    function renounceOwnership() public override onlyOwner {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    uint8 private _decimals;
    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }
    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
import "./ILayerZeroUserApplicationConfig.sol";
interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. ie: pay for a specified destination gasAmount, or receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;
    // @notice get the inboundNonce of a receiver from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);
    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);
    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);
    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);
    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;
    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);
    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);
    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);
    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);
    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);
    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);
    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity >=0.5.0;
interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;
    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;
    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;
    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

# @version 0.3.1
# (c) Curve.Fi, 2021
# Pool for two crypto assets

# Universal implementation which can use both ETH and ERC20s
from vyper.interfaces import ERC20


interface Factory:
    def admin() -> address: view
    def fee_receiver() -> address: view

interface CurveToken:
    def totalSupply() -> uint256: view
    def mint(_to: address, _value: uint256) -> bool: nonpayable
    def mint_relative(_to: address, frac: uint256) -> uint256: nonpayable
    def burnFrom(_to: address, _value: uint256) -> bool: nonpayable

interface WETH:
    def deposit(): payable
    def withdraw(_amount: uint256): nonpayable


# Events
event TokenExchange:
    buyer: indexed(address)
    sold_id: uint256
    tokens_sold: uint256
    bought_id: uint256
    tokens_bought: uint256

event AddLiquidity:
    provider: indexed(address)
    token_amounts: uint256[N_COINS]
    fee: uint256
    token_supply: uint256

event RemoveLiquidity:
    provider: indexed(address)
    token_amounts: uint256[N_COINS]
    token_supply: uint256

event RemoveLiquidityOne:
    provider: indexed(address)
    token_amount: uint256
    coin_index: uint256
    coin_amount: uint256

event CommitNewParameters:
    deadline: indexed(uint256)
    admin_fee: uint256
    mid_fee: uint256
    out_fee: uint256
    fee_gamma: uint256
    allowed_extra_profit: uint256
    adjustment_step: uint256
    ma_half_time: uint256

event NewParameters:
    admin_fee: uint256
    mid_fee: uint256
    out_fee: uint256
    fee_gamma: uint256
    allowed_extra_profit: uint256
    adjustment_step: uint256
    ma_half_time: uint256

event RampAgamma:
    initial_A: uint256
    future_A: uint256
    initial_gamma: uint256
    future_gamma: uint256
    initial_time: uint256
    future_time: uint256

event StopRampA:
    current_A: uint256
    current_gamma: uint256
    time: uint256

event ClaimAdminFee:
    admin: indexed(address)
    tokens: uint256


ADMIN_ACTIONS_DELAY: constant(uint256) = 3 * 86400
MIN_RAMP_TIME: constant(uint256) = 86400

MAX_ADMIN_FEE: constant(uint256) = 10 * 10 ** 9
MIN_FEE: constant(uint256) = 5 * 10 ** 5  # 0.5 bps
MAX_FEE: constant(uint256) = 10 * 10 ** 9
MAX_A_CHANGE: constant(uint256) = 10
NOISE_FEE: constant(uint256) = 10**5  # 0.1 bps

MIN_GAMMA: constant(uint256) = 10**10
MAX_GAMMA: constant(uint256) = 2 * 10**16

MIN_A: constant(uint256) = N_COINS**N_COINS * A_MULTIPLIER / 10
MAX_A: constant(uint256) = N_COINS**N_COINS * A_MULTIPLIER * 100000

EXP_PRECISION: constant(uint256) = 10**10

N_COINS: constant(int128) = 2
PRECISION: constant(uint256) = 10 ** 18  # The precision to convert to
A_MULTIPLIER: constant(uint256) = 10000


# Implementation can be changed by changing this constant
WETH20: immutable(address)


token: public(address)
coins: public(address[N_COINS])

price_scale: public(uint256)   # Internal price scale
_price_oracle: uint256  # Price target given by MA

last_prices: public(uint256)
last_prices_timestamp: public(uint256)

initial_A_gamma: public(uint256)
future_A_gamma: public(uint256)
initial_A_gamma_time: public(uint256)
future_A_gamma_time: public(uint256)

allowed_extra_profit: public(uint256)  # 2 * 10**12 - recommended value
future_allowed_extra_profit: public(uint256)

fee_gamma: public(uint256)
future_fee_gamma: public(uint256)

adjustment_step: public(uint256)
future_adjustment_step: public(uint256)

ma_half_time: public(uint256)
future_ma_half_time: public(uint256)

mid_fee: public(uint256)
out_fee: public(uint256)
admin_fee: public(uint256)
future_mid_fee: public(uint256)
future_out_fee: public(uint256)
future_admin_fee: public(uint256)

balances: public(uint256[N_COINS])
D: public(uint256)

factory: public(address)

xcp_profit: public(uint256)
xcp_profit_a: public(uint256)  # Full profit at last claim of admin fees
virtual_price: public(uint256)  # Cached (fast to read) virtual price also used internally
not_adjusted: bool

admin_actions_deadline: public(uint256)

# This must be changed for different N_COINS
# For example:
# N_COINS = 3 -> 1  (10**18 -> 10**18)
# N_COINS = 4 -> 10**8  (10**18 -> 10**10)
# PRICE_PRECISION_MUL: constant(uint256) = 1
PRECISIONS: uint256  # packed


@external
def __init__(_weth: address):
    WETH20 = _weth
    self.mid_fee = 22022022


@payable
@external
def __default__():
    pass


# Internal Functions

@internal
@view
def _get_precisions() -> uint256[2]:
    p0: uint256 = self.PRECISIONS
    p1: uint256 = 10 ** shift(p0, -8)
    p0 = 10 ** bitwise_and(p0, 255)
    return [p0, p1]


@internal
@view
def xp() -> uint256[N_COINS]:
    precisions: uint256[2] = self._get_precisions()
    return [self.balances[0] * precisions[0],
            self.balances[1] * precisions[1] * self.price_scale / PRECISION]


@view
@internal
def _A_gamma() -> uint256[2]:
    t1: uint256 = self.future_A_gamma_time

    A_gamma_1: uint256 = self.future_A_gamma
    gamma1: uint256 = bitwise_and(A_gamma_1, 2**128-1)
    A1: uint256 = shift(A_gamma_1, -128)

    if block.timestamp < t1:
        # handle ramping up and down of A
        A_gamma_0: uint256 = self.initial_A_gamma
        t0: uint256 = self.initial_A_gamma_time

        # Less readable but more compact way of writing and converting to uint256
        # gamma0: uint256 = bitwise_and(A_gamma_0, 2**128-1)
        # A0: uint256 = shift(A_gamma_0, -128)
        # A1 = A0 + (A1 - A0) * (block.timestamp - t0) / (t1 - t0)
        # gamma1 = gamma0 + (gamma1 - gamma0) * (block.timestamp - t0) / (t1 - t0)

        t1 -= t0
        t0 = block.timestamp - t0
        t2: uint256 = t1 - t0

        A1 = (shift(A_gamma_0, -128) * t2 + A1 * t0) / t1
        gamma1 = (bitwise_and(A_gamma_0, 2**128-1) * t2 + gamma1 * t0) / t1

    return [A1, gamma1]


@internal
@view
def _fee(xp: uint256[N_COINS]) -> uint256:
    """
    f = fee_gamma / (fee_gamma + (1 - K))
    where
    K = prod(x) / (sum(x) / N)**N
    (all normalized to 1e18)
    """
    fee_gamma: uint256 = self.fee_gamma
    f: uint256 = xp[0] + xp[1]  # sum
    f = fee_gamma * 10**18 / (
        fee_gamma + 10**18 - (10**18 * N_COINS**N_COINS) * xp[0] / f * xp[1] / f
    )
    return (self.mid_fee * f + self.out_fee * (10**18 - f)) / 10**18


### Math functions
@internal
@pure
def geometric_mean(unsorted_x: uint256[N_COINS], sort: bool) -> uint256:
    """
    (x[0] * x[1] * ...) ** (1/N)
    """
    x: uint256[N_COINS] = unsorted_x
    if sort and x[0] < x[1]:
        x = [unsorted_x[1], unsorted_x[0]]
    D: uint256 = x[0]
    diff: uint256 = 0
    for i in range(255):
        D_prev: uint256 = D
        # tmp: uint256 = 10**18
        # for _x in x:
        #     tmp = tmp * _x / D
        # D = D * ((N_COINS - 1) * 10**18 + tmp) / (N_COINS * 10**18)
        # line below makes it for 2 coins
        D = (D + x[0] * x[1] / D) / N_COINS
        if D > D_prev:
            diff = D - D_prev
        else:
            diff = D_prev - D
        if diff <= 1 or diff * 10**18 < D:
            return D
    raise "Did not converge"


@internal
@view
def newton_D(ANN: uint256, gamma: uint256, x_unsorted: uint256[N_COINS]) -> uint256:
    """
    Finding the invariant using Newton method.
    ANN is higher by the factor A_MULTIPLIER
    ANN is already A * N**N

    Currently uses 60k gas
    """
    # Safety checks
    assert ANN > MIN_A - 1 and ANN < MAX_A + 1  # dev: unsafe values A
    assert gamma > MIN_GAMMA - 1 and gamma < MAX_GAMMA + 1  # dev: unsafe values gamma

    # Initial value of invariant D is that for constant-product invariant
    x: uint256[N_COINS] = x_unsorted
    if x[0] < x[1]:
        x = [x_unsorted[1], x_unsorted[0]]

    assert x[0] > 10**9 - 1 and x[0] < 10**15 * 10**18 + 1  # dev: unsafe values x[0]
    assert x[1] * 10**18 / x[0] > 10**14-1  # dev: unsafe values x[i] (input)

    D: uint256 = N_COINS * self.geometric_mean(x, False)
    S: uint256 = x[0] + x[1]

    for i in range(255):
        D_prev: uint256 = D

        # K0: uint256 = 10**18
        # for _x in x:
        #     K0 = K0 * _x * N_COINS / D
        # collapsed for 2 coins
        K0: uint256 = (10**18 * N_COINS**2) * x[0] / D * x[1] / D

        _g1k0: uint256 = gamma + 10**18
        if _g1k0 > K0:
            _g1k0 = _g1k0 - K0 + 1
        else:
            _g1k0 = K0 - _g1k0 + 1

        # D / (A * N**N) * _g1k0**2 / gamma**2
        mul1: uint256 = 10**18 * D / gamma * _g1k0 / gamma * _g1k0 * A_MULTIPLIER / ANN

        # 2*N*K0 / _g1k0
        mul2: uint256 = (2 * 10**18) * N_COINS * K0 / _g1k0

        neg_fprime: uint256 = (S + S * mul2 / 10**18) + mul1 * N_COINS / K0 - mul2 * D / 10**18

        # D -= f / fprime
        D_plus: uint256 = D * (neg_fprime + S) / neg_fprime
        D_minus: uint256 = D*D / neg_fprime
        if 10**18 > K0:
            D_minus += D * (mul1 / neg_fprime) / 10**18 * (10**18 - K0) / K0
        else:
            D_minus -= D * (mul1 / neg_fprime) / 10**18 * (K0 - 10**18) / K0

        if D_plus > D_minus:
            D = D_plus - D_minus
        else:
            D = (D_minus - D_plus) / 2

        diff: uint256 = 0
        if D > D_prev:
            diff = D - D_prev
        else:
            diff = D_prev - D
        if diff * 10**14 < max(10**16, D):  # Could reduce precision for gas efficiency here
            # Test that we are safe with the next newton_y
            for _x in x:
                frac: uint256 = _x * 10**18 / D
                assert (frac > 10**16 - 1) and (frac < 10**20 + 1)  # dev: unsafe values x[i]
            return D

    raise "Did not converge"


@internal
@pure
def newton_y(ANN: uint256, gamma: uint256, x: uint256[N_COINS], D: uint256, i: uint256) -> uint256:
    """
    Calculating x[i] given other balances x[0..N_COINS-1] and invariant D
    ANN = A * N**N
    """
    # Safety checks
    assert ANN > MIN_A - 1 and ANN < MAX_A + 1  # dev: unsafe values A
    assert gamma > MIN_GAMMA - 1 and gamma < MAX_GAMMA + 1  # dev: unsafe values gamma
    assert D > 10**17 - 1 and D < 10**15 * 10**18 + 1 # dev: unsafe values D

    x_j: uint256 = x[1 - i]
    y: uint256 = D**2 / (x_j * N_COINS**2)
    K0_i: uint256 = (10**18 * N_COINS) * x_j / D
    # S_i = x_j

    # frac = x_j * 1e18 / D => frac = K0_i / N_COINS
    assert (K0_i > 10**16*N_COINS - 1) and (K0_i < 10**20*N_COINS + 1)  # dev: unsafe values x[i]

    # x_sorted: uint256[N_COINS] = x
    # x_sorted[i] = 0
    # x_sorted = self.sort(x_sorted)  # From high to low
    # x[not i] instead of x_sorted since x_soted has only 1 element

    convergence_limit: uint256 = max(max(x_j / 10**14, D / 10**14), 100)

    for j in range(255):
        y_prev: uint256 = y

        K0: uint256 = K0_i * y * N_COINS / D
        S: uint256 = x_j + y

        _g1k0: uint256 = gamma + 10**18
        if _g1k0 > K0:
            _g1k0 = _g1k0 - K0 + 1
        else:
            _g1k0 = K0 - _g1k0 + 1

        # D / (A * N**N) * _g1k0**2 / gamma**2
        mul1: uint256 = 10**18 * D / gamma * _g1k0 / gamma * _g1k0 * A_MULTIPLIER / ANN

        # 2*K0 / _g1k0
        mul2: uint256 = 10**18 + (2 * 10**18) * K0 / _g1k0

        yfprime: uint256 = 10**18 * y + S * mul2 + mul1
        _dyfprime: uint256 = D * mul2
        if yfprime < _dyfprime:
            y = y_prev / 2
            continue
        else:
            yfprime -= _dyfprime
        fprime: uint256 = yfprime / y

        # y -= f / f_prime;  y = (y * fprime - f) / fprime
        # y = (yfprime + 10**18 * D - 10**18 * S) // fprime + mul1 // fprime * (10**18 - K0) // K0
        y_minus: uint256 = mul1 / fprime
        y_plus: uint256 = (yfprime + 10**18 * D) / fprime + y_minus * 10**18 / K0
        y_minus += 10**18 * S / fprime

        if y_plus < y_minus:
            y = y_prev / 2
        else:
            y = y_plus - y_minus

        diff: uint256 = 0
        if y > y_prev:
            diff = y - y_prev
        else:
            diff = y_prev - y
        if diff < max(convergence_limit, y / 10**14):
            frac: uint256 = y * 10**18 / D
            assert (frac > 10**16 - 1) and (frac < 10**20 + 1)  # dev: unsafe value for y
            return y

    raise "Did not converge"


@internal
@pure
def halfpow(power: uint256) -> uint256:
    """
    1e18 * 0.5 ** (power/1e18)

    Inspired by: https://github.com/balancer-labs/balancer-core/blob/master/contracts/BNum.sol#L128
    """
    intpow: uint256 = power / 10**18
    otherpow: uint256 = power - intpow * 10**18
    if intpow > 59:
        return 0
    result: uint256 = 10**18 / (2**intpow)
    if otherpow == 0:
        return result

    term: uint256 = 10**18
    x: uint256 = 5 * 10**17
    S: uint256 = 10**18
    neg: bool = False

    for i in range(1, 256):
        K: uint256 = i * 10**18
        c: uint256 = K - 10**18
        if otherpow > c:
            c = otherpow - c
            neg = not neg
        else:
            c -= otherpow
        term = term * (c * x / 10**18) / K
        if neg:
            S -= term
        else:
            S += term
        if term < EXP_PRECISION:
            return result * S / 10**18

    raise "Did not converge"
### end of Math functions


@internal
@view
def get_xcp(D: uint256) -> uint256:
    x: uint256[N_COINS] = [D / N_COINS, D * PRECISION / (self.price_scale * N_COINS)]
    return self.geometric_mean(x, True)


@internal
def _claim_admin_fees():
    A_gamma: uint256[2] = self._A_gamma()

    xcp_profit: uint256 = self.xcp_profit
    xcp_profit_a: uint256 = self.xcp_profit_a

    # Gulp here
    for i in range(N_COINS):
        coin: address = self.coins[i]
        if coin == WETH20:
            self.balances[i] = self.balance
        else:
            self.balances[i] = ERC20(coin).balanceOf(self)

    vprice: uint256 = self.virtual_price

    if xcp_profit > xcp_profit_a:
        fees: uint256 = (xcp_profit - xcp_profit_a) * self.admin_fee / (2 * 10**10)
        if fees > 0:
            receiver: address = Factory(self.factory).fee_receiver()
            if receiver != ZERO_ADDRESS:
                frac: uint256 = vprice * 10**18 / (vprice - fees) - 10**18
                claimed: uint256 = CurveToken(self.token).mint_relative(receiver, frac)
                xcp_profit -= fees*2
                self.xcp_profit = xcp_profit
                log ClaimAdminFee(receiver, claimed)

    total_supply: uint256 = CurveToken(self.token).totalSupply()

    # Recalculate D b/c we gulped
    D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], self.xp())
    self.D = D

    self.virtual_price = 10**18 * self.get_xcp(D) / total_supply

    if xcp_profit > xcp_profit_a:
        self.xcp_profit_a = xcp_profit


@internal
@view
def internal_price_oracle() -> uint256:
    price_oracle: uint256 = self._price_oracle
    last_prices_timestamp: uint256 = self.last_prices_timestamp

    if last_prices_timestamp < block.timestamp:
        ma_half_time: uint256 = self.ma_half_time
        last_prices: uint256 = self.last_prices
        alpha: uint256 = self.halfpow((block.timestamp - last_prices_timestamp) * 10**18 / ma_half_time)
        return (last_prices * (10**18 - alpha) + price_oracle * alpha) / 10**18

    else:
        return price_oracle


@internal
def tweak_price(A_gamma: uint256[2],_xp: uint256[N_COINS], p_i: uint256, new_D: uint256):
    price_oracle: uint256 = self._price_oracle
    last_prices: uint256 = self.last_prices
    price_scale: uint256 = self.price_scale
    last_prices_timestamp: uint256 = self.last_prices_timestamp
    p_new: uint256 = 0

    if last_prices_timestamp < block.timestamp:
        # MA update required
        ma_half_time: uint256 = self.ma_half_time
        alpha: uint256 = self.halfpow((block.timestamp - last_prices_timestamp) * 10**18 / ma_half_time)
        price_oracle = (last_prices * (10**18 - alpha) + price_oracle * alpha) / 10**18
        self._price_oracle = price_oracle
        self.last_prices_timestamp = block.timestamp

    D_unadjusted: uint256 = new_D  # Withdrawal methods know new D already
    if new_D == 0:
        # We will need this a few times (35k gas)
        D_unadjusted = self.newton_D(A_gamma[0], A_gamma[1], _xp)

    if p_i > 0:
        last_prices = p_i

    else:
        # calculate real prices
        __xp: uint256[N_COINS] = _xp
        dx_price: uint256 = __xp[0] / 10**6
        __xp[0] += dx_price
        last_prices = price_scale * dx_price / (_xp[1] - self.newton_y(A_gamma[0], A_gamma[1], __xp, D_unadjusted, 1))

    self.last_prices = last_prices

    total_supply: uint256 = CurveToken(self.token).totalSupply()
    old_xcp_profit: uint256 = self.xcp_profit
    old_virtual_price: uint256 = self.virtual_price

    # Update profit numbers without price adjustment first
    xp: uint256[N_COINS] = [D_unadjusted / N_COINS, D_unadjusted * PRECISION / (N_COINS * price_scale)]
    xcp_profit: uint256 = 10**18
    virtual_price: uint256 = 10**18

    if old_virtual_price > 0:
        xcp: uint256 = self.geometric_mean(xp, True)
        virtual_price = 10**18 * xcp / total_supply
        xcp_profit = old_xcp_profit * virtual_price / old_virtual_price

        t: uint256 = self.future_A_gamma_time
        if virtual_price < old_virtual_price and t == 0:
            raise "Loss"
        if t == 1:
            self.future_A_gamma_time = 0

    self.xcp_profit = xcp_profit

    norm: uint256 = price_oracle * 10**18 / price_scale
    if norm > 10**18:
        norm -= 10**18
    else:
        norm = 10**18 - norm
    adjustment_step: uint256 = max(self.adjustment_step, norm / 5)

    needs_adjustment: bool = self.not_adjusted
    # if not needs_adjustment and (virtual_price-10**18 > (xcp_profit-10**18)/2 + self.allowed_extra_profit):
    # (re-arrange for gas efficiency)
    if not needs_adjustment and (virtual_price * 2 - 10**18 > xcp_profit + 2*self.allowed_extra_profit) and (norm > adjustment_step) and (old_virtual_price > 0):
        needs_adjustment = True
        self.not_adjusted = True

    if needs_adjustment:
        if norm > adjustment_step and old_virtual_price > 0:
            p_new = (price_scale * (norm - adjustment_step) + adjustment_step * price_oracle) / norm

            # Calculate balances*prices
            xp = [_xp[0], _xp[1] * p_new / price_scale]

            # Calculate "extended constant product" invariant xCP and virtual price
            D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], xp)
            xp = [D / N_COINS, D * PRECISION / (N_COINS * p_new)]
            # We reuse old_virtual_price here but it's not old anymore
            old_virtual_price = 10**18 * self.geometric_mean(xp, True) / total_supply

            # Proceed if we've got enough profit
            # if (old_virtual_price > 10**18) and (2 * (old_virtual_price - 10**18) > xcp_profit - 10**18):
            if (old_virtual_price > 10**18) and (2 * old_virtual_price - 10**18 > xcp_profit):
                self.price_scale = p_new
                self.D = D
                self.virtual_price = old_virtual_price

                return

            else:
                self.not_adjusted = False

                # Can instead do another flag variable if we want to save bytespace
                self.D = D_unadjusted
                self.virtual_price = virtual_price
                self._claim_admin_fees()

                return

    # If we are here, the price_scale adjustment did not happen
    # Still need to update the profit counter and D
    self.D = D_unadjusted
    self.virtual_price = virtual_price

    # norm appeared < adjustment_step after
    if needs_adjustment:
        self.not_adjusted = False
        self._claim_admin_fees()


@internal
def _exchange(sender: address, mvalue: uint256, i: uint256, j: uint256, dx: uint256, min_dy: uint256,
              use_eth: bool, receiver: address, callbacker: address, callback_sig: bytes32) -> uint256:
    assert i != j  # dev: coin index out of range
    assert i < N_COINS  # dev: coin index out of range
    assert j < N_COINS  # dev: coin index out of range
    assert dx > 0  # dev: do not exchange 0 coins

    A_gamma: uint256[2] = self._A_gamma()
    xp: uint256[N_COINS] = self.balances
    p: uint256 = 0
    dy: uint256 = 0

    in_coin: address = self.coins[i]
    out_coin: address = self.coins[j]

    y: uint256 = xp[j]
    x0: uint256 = xp[i]
    xp[i] = x0 + dx
    self.balances[i] = xp[i]

    price_scale: uint256 = self.price_scale
    precisions: uint256[2] = self._get_precisions()

    xp = [xp[0] * precisions[0], xp[1] * price_scale * precisions[1] / PRECISION]

    prec_i: uint256 = precisions[0]
    prec_j: uint256 = precisions[1]
    if i == 1:
        prec_i = precisions[1]
        prec_j = precisions[0]

    # In case ramp is happening
    t: uint256 = self.future_A_gamma_time
    if t > 0:
        x0 *= prec_i
        if i > 0:
            x0 = x0 * price_scale / PRECISION
        x1: uint256 = xp[i]  # Back up old value in xp
        xp[i] = x0
        self.D = self.newton_D(A_gamma[0], A_gamma[1], xp)
        xp[i] = x1  # And restore
        if block.timestamp >= t:
            self.future_A_gamma_time = 1

    dy = xp[j] - self.newton_y(A_gamma[0], A_gamma[1], xp, self.D, j)
    # Not defining new "y" here to have less variables / make subsequent calls cheaper
    xp[j] -= dy
    dy -= 1

    if j > 0:
        dy = dy * PRECISION / price_scale
    dy /= prec_j

    dy -= self._fee(xp) * dy / 10**10
    assert dy >= min_dy, "Slippage"
    y -= dy

    self.balances[j] = y

    # Do transfers in and out together
    # XXX coin vs ETH
    if use_eth and in_coin == WETH20:
        assert mvalue == dx  # dev: incorrect eth amount
    else:
        assert mvalue == 0  # dev: nonzero eth amount
        if callback_sig == EMPTY_BYTES32:
            response: Bytes[32] = raw_call(
                in_coin,
                _abi_encode(
                    sender, self, dx, method_id=method_id("transferFrom(address,address,uint256)")
                ),
                max_outsize=32,
            )
            if len(response) != 0:
                assert convert(response, bool)  # dev: failed transfer
        else:
            b: uint256 = ERC20(in_coin).balanceOf(self)
            raw_call(
                callbacker,
                concat(slice(callback_sig, 0, 4), _abi_encode(sender, receiver, in_coin, dx, dy))
            )
            assert ERC20(in_coin).balanceOf(self) - b == dx  # dev: callback didn't give us coins
        if in_coin == WETH20:
            WETH(WETH20).withdraw(dx)

    if use_eth and out_coin == WETH20:
        raw_call(receiver, b"", value=dy)
    else:
        if out_coin == WETH20:
            WETH(WETH20).deposit(value=dy)
        response: Bytes[32] = raw_call(
            out_coin,
            _abi_encode(receiver, dy, method_id=method_id("transfer(address,uint256)")),
            max_outsize=32,
        )
        if len(response) != 0:
            assert convert(response, bool)

    y *= prec_j
    if j > 0:
        y = y * price_scale / PRECISION
    xp[j] = y

    # Calculate price
    if dx > 10**5 and dy > 10**5:
        _dx: uint256 = dx * prec_i
        _dy: uint256 = dy * prec_j
        if i == 0:
            p = _dx * 10**18 / _dy
        else:  # j == 0
            p = _dy * 10**18 / _dx

    self.tweak_price(A_gamma, xp, p, 0)

    log TokenExchange(sender, i, dx, j, dy)

    return dy


@view
@internal
def _calc_token_fee(amounts: uint256[N_COINS], xp: uint256[N_COINS]) -> uint256:
    # fee = sum(amounts_i - avg(amounts)) * fee' / sum(amounts)
    fee: uint256 = self._fee(xp) * N_COINS / (4 * (N_COINS-1))
    S: uint256 = 0
    for _x in amounts:
        S += _x
    avg: uint256 = S / N_COINS
    Sdiff: uint256 = 0
    for _x in amounts:
        if _x > avg:
            Sdiff += _x - avg
        else:
            Sdiff += avg - _x
    return fee * Sdiff / S + NOISE_FEE


@internal
@view
def _calc_withdraw_one_coin(A_gamma: uint256[2], token_amount: uint256, i: uint256, update_D: bool,
                            calc_price: bool) -> (uint256, uint256, uint256, uint256[N_COINS]):
    token_supply: uint256 = CurveToken(self.token).totalSupply()
    assert token_amount <= token_supply  # dev: token amount more than supply
    assert i < N_COINS  # dev: coin out of range

    xx: uint256[N_COINS] = self.balances
    D0: uint256 = 0
    precisions: uint256[2] = self._get_precisions()

    price_scale_i: uint256 = self.price_scale * precisions[1]
    xp: uint256[N_COINS] = [xx[0] * precisions[0], xx[1] * price_scale_i / PRECISION]
    if i == 0:
        price_scale_i = PRECISION * precisions[0]

    if update_D:
        D0 = self.newton_D(A_gamma[0], A_gamma[1], xp)
    else:
        D0 = self.D

    D: uint256 = D0

    # Charge the fee on D, not on y, e.g. reducing invariant LESS than charging the user
    fee: uint256 = self._fee(xp)
    dD: uint256 = token_amount * D / token_supply
    D -= (dD - (fee * dD / (2 * 10**10) + 1))
    y: uint256 = self.newton_y(A_gamma[0], A_gamma[1], xp, D, i)
    dy: uint256 = (xp[i] - y) * PRECISION / price_scale_i
    xp[i] = y

    # Price calc
    p: uint256 = 0
    if calc_price and dy > 10**5 and token_amount > 10**5:
        # p_i = dD / D0 * sum'(p_k * x_k) / (dy - dD / D0 * y0)
        S: uint256 = 0
        precision: uint256 = precisions[0]
        if i == 1:
            S = xx[0] * precisions[0]
            precision = precisions[1]
        else:
            S = xx[1] * precisions[1]
        S = S * dD / D0
        p = S * PRECISION / (dy * precision - dD * xx[i] * precision / D0)
        if i == 0:
            p = (10**18)**2 / p

    return dy, p, D, xp


@internal
@pure
def sqrt_int(x: uint256) -> uint256:
    """
    Originating from: https://github.com/vyperlang/vyper/issues/1266
    """

    if x == 0:
        return 0

    z: uint256 = (x + 10**18) / 2
    y: uint256 = x

    for i in range(256):
        if z == y:
            return y
        y = z
        z = (x * 10**18 / z + z) / 2

    raise "Did not converge"


# External Functions


@payable
@external
@nonreentrant('lock')
def exchange(i: uint256, j: uint256, dx: uint256, min_dy: uint256,
             use_eth: bool = False, receiver: address = msg.sender) -> uint256:
    """
    Exchange using WETH by default
    """
    return self._exchange(msg.sender, msg.value, i, j, dx, min_dy, use_eth, receiver, ZERO_ADDRESS, EMPTY_BYTES32)


@payable
@external
@nonreentrant('lock')
def exchange_underlying(i: uint256, j: uint256, dx: uint256, min_dy: uint256,
                        receiver: address = msg.sender) -> uint256:
    """
    Exchange using ETH
    """
    return self._exchange(msg.sender, msg.value, i, j, dx, min_dy, True, receiver, ZERO_ADDRESS, EMPTY_BYTES32)


@payable
@external
@nonreentrant('lock')
def exchange_extended(i: uint256, j: uint256, dx: uint256, min_dy: uint256,
                      use_eth: bool, sender: address, receiver: address, cb: bytes32) -> uint256:
    assert cb != EMPTY_BYTES32  # dev: No callback specified
    return self._exchange(sender, msg.value, i, j, dx, min_dy, use_eth, receiver, msg.sender, cb)


@payable
@external
@nonreentrant('lock')
def add_liquidity(amounts: uint256[N_COINS], min_mint_amount: uint256,
                  use_eth: bool = False, receiver: address = msg.sender) -> uint256:
    assert amounts[0] > 0 or amounts[1] > 0  # dev: no coins to add

    A_gamma: uint256[2] = self._A_gamma()

    xp: uint256[N_COINS] = self.balances
    amountsp: uint256[N_COINS] = empty(uint256[N_COINS])
    xx: uint256[N_COINS] = empty(uint256[N_COINS])
    d_token: uint256 = 0
    d_token_fee: uint256 = 0
    old_D: uint256 = 0

    xp_old: uint256[N_COINS] = xp

    for i in range(N_COINS):
        bal: uint256 = xp[i] + amounts[i]
        xp[i] = bal
        self.balances[i] = bal
    xx = xp

    precisions: uint256[2] = self._get_precisions()

    price_scale: uint256 = self.price_scale * precisions[1]
    xp = [xp[0] * precisions[0], xp[1] * price_scale / PRECISION]
    xp_old = [xp_old[0] * precisions[0], xp_old[1] * price_scale / PRECISION]

    if not use_eth:
        assert msg.value == 0  # dev: nonzero eth amount

    for i in range(N_COINS):
        coin: address = self.coins[i]
        if use_eth and coin == WETH20:
            assert msg.value == amounts[i]  # dev: incorrect eth amount
        if amounts[i] > 0:
            if (not use_eth) or (coin != WETH20):
                response: Bytes[32] = raw_call(
                    coin,
                    _abi_encode(
                        msg.sender,
                        self,
                        amounts[i],
                        method_id=method_id("transferFrom(address,address,uint256)"),
                    ),
                    max_outsize=32,
                )
                if len(response) != 0:
                    assert convert(response, bool)  # dev: failed transfer
                if coin == WETH20:
                    WETH(WETH20).withdraw(amounts[i])
            amountsp[i] = xp[i] - xp_old[i]

    t: uint256 = self.future_A_gamma_time
    if t > 0:
        old_D = self.newton_D(A_gamma[0], A_gamma[1], xp_old)
        if block.timestamp >= t:
            self.future_A_gamma_time = 1
    else:
        old_D = self.D

    D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], xp)

    lp_token: address = self.token
    token_supply: uint256 = CurveToken(lp_token).totalSupply()
    if old_D > 0:
        d_token = token_supply * D / old_D - token_supply
    else:
        d_token = self.get_xcp(D)  # making initial virtual price equal to 1
    assert d_token > 0  # dev: nothing minted

    if old_D > 0:
        d_token_fee = self._calc_token_fee(amountsp, xp) * d_token / 10**10 + 1
        d_token -= d_token_fee
        token_supply += d_token
        CurveToken(lp_token).mint(receiver, d_token)

        # Calculate price
        # p_i * (dx_i - dtoken / token_supply * xx_i) = sum{k!=i}(p_k * (dtoken / token_supply * xx_k - dx_k))
        # Simplified for 2 coins
        p: uint256 = 0
        if d_token > 10**5:
            if amounts[0] == 0 or amounts[1] == 0:
                S: uint256 = 0
                precision: uint256 = 0
                ix: uint256 = 0
                if amounts[0] == 0:
                    S = xx[0] * precisions[0]
                    precision = precisions[1]
                    ix = 1
                else:
                    S = xx[1] * precisions[1]
                    precision = precisions[0]
                S = S * d_token / token_supply
                p = S * PRECISION / (amounts[ix] * precision - d_token * xx[ix] * precision / token_supply)
                if ix == 0:
                    p = (10**18)**2 / p

        self.tweak_price(A_gamma, xp, p, D)

    else:
        self.D = D
        self.virtual_price = 10**18
        self.xcp_profit = 10**18
        CurveToken(lp_token).mint(receiver, d_token)

    assert d_token >= min_mint_amount, "Slippage"

    log AddLiquidity(receiver, amounts, d_token_fee, token_supply)

    return d_token


@external
@nonreentrant('lock')
def remove_liquidity(_amount: uint256, min_amounts: uint256[N_COINS],
                     use_eth: bool = False, receiver: address = msg.sender):
    """
    This withdrawal method is very safe, does no complex math
    """
    lp_token: address = self.token
    total_supply: uint256 = CurveToken(lp_token).totalSupply()
    CurveToken(lp_token).burnFrom(msg.sender, _amount)
    balances: uint256[N_COINS] = self.balances
    amount: uint256 = _amount - 1  # Make rounding errors favoring other LPs a tiny bit

    for i in range(N_COINS):
        d_balance: uint256 = balances[i] * amount / total_supply
        assert d_balance >= min_amounts[i]
        self.balances[i] = balances[i] - d_balance
        balances[i] = d_balance  # now it's the amounts going out
        coin: address = self.coins[i]
        if use_eth and coin == WETH20:
            raw_call(receiver, b"", value=d_balance)
        else:
            if coin == WETH20:
                WETH(WETH20).deposit(value=d_balance)
            response: Bytes[32] = raw_call(
                coin,
                _abi_encode(receiver, d_balance, method_id=method_id("transfer(address,uint256)")),
                max_outsize=32,
            )
            if len(response) != 0:
                assert convert(response, bool)

    D: uint256 = self.D
    self.D = D - D * amount / total_supply

    log RemoveLiquidity(msg.sender, balances, total_supply - _amount)


@external
@nonreentrant('lock')
def remove_liquidity_one_coin(token_amount: uint256, i: uint256, min_amount: uint256,
                              use_eth: bool = False, receiver: address = msg.sender) -> uint256:
    A_gamma: uint256[2] = self._A_gamma()

    dy: uint256 = 0
    D: uint256 = 0
    p: uint256 = 0
    xp: uint256[N_COINS] = empty(uint256[N_COINS])
    future_A_gamma_time: uint256 = self.future_A_gamma_time
    dy, p, D, xp = self._calc_withdraw_one_coin(A_gamma, token_amount, i, (future_A_gamma_time > 0), True)
    assert dy >= min_amount, "Slippage"

    if block.timestamp >= future_A_gamma_time:
        self.future_A_gamma_time = 1

    self.balances[i] -= dy
    CurveToken(self.token).burnFrom(msg.sender, token_amount)

    coin: address = self.coins[i]
    if use_eth and coin == WETH20:
        raw_call(receiver, b"", value=dy)
    else:
        if coin == WETH20:
            WETH(WETH20).deposit(value=dy)
        response: Bytes[32] = raw_call(
            coin,
            _abi_encode(receiver, dy, method_id=method_id("transfer(address,uint256)")),
            max_outsize=32,
        )
        if len(response) != 0:
            assert convert(response, bool)

    self.tweak_price(A_gamma, xp, p, D)

    log RemoveLiquidityOne(msg.sender, token_amount, i, dy)

    return dy


@external
@nonreentrant('lock')
def claim_admin_fees():
    self._claim_admin_fees()


# Admin parameters
@external
def ramp_A_gamma(future_A: uint256, future_gamma: uint256, future_time: uint256):
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner
    assert block.timestamp > self.initial_A_gamma_time + (MIN_RAMP_TIME-1)
    assert future_time > block.timestamp + (MIN_RAMP_TIME-1)  # dev: insufficient time

    A_gamma: uint256[2] = self._A_gamma()
    initial_A_gamma: uint256 = shift(A_gamma[0], 128)
    initial_A_gamma = bitwise_or(initial_A_gamma, A_gamma[1])

    assert future_A > MIN_A-1
    assert future_A < MAX_A+1
    assert future_gamma > MIN_GAMMA-1
    assert future_gamma < MAX_GAMMA+1

    ratio: uint256 = 10**18 * future_A / A_gamma[0]
    assert ratio < 10**18 * MAX_A_CHANGE + 1
    assert ratio > 10**18 / MAX_A_CHANGE - 1

    ratio = 10**18 * future_gamma / A_gamma[1]
    assert ratio < 10**18 * MAX_A_CHANGE + 1
    assert ratio > 10**18 / MAX_A_CHANGE - 1

    self.initial_A_gamma = initial_A_gamma
    self.initial_A_gamma_time = block.timestamp

    future_A_gamma: uint256 = shift(future_A, 128)
    future_A_gamma = bitwise_or(future_A_gamma, future_gamma)
    self.future_A_gamma_time = future_time
    self.future_A_gamma = future_A_gamma

    log RampAgamma(A_gamma[0], future_A, A_gamma[1], future_gamma, block.timestamp, future_time)


@external
def stop_ramp_A_gamma():
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner

    A_gamma: uint256[2] = self._A_gamma()
    current_A_gamma: uint256 = shift(A_gamma[0], 128)
    current_A_gamma = bitwise_or(current_A_gamma, A_gamma[1])
    self.initial_A_gamma = current_A_gamma
    self.future_A_gamma = current_A_gamma
    self.initial_A_gamma_time = block.timestamp
    self.future_A_gamma_time = block.timestamp
    # now (block.timestamp < t1) is always False, so we return saved A

    log StopRampA(A_gamma[0], A_gamma[1], block.timestamp)


@external
def commit_new_parameters(
    _new_mid_fee: uint256,
    _new_out_fee: uint256,
    _new_admin_fee: uint256,
    _new_fee_gamma: uint256,
    _new_allowed_extra_profit: uint256,
    _new_adjustment_step: uint256,
    _new_ma_half_time: uint256,
    ):
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner
    assert self.admin_actions_deadline == 0  # dev: active action

    new_mid_fee: uint256 = _new_mid_fee
    new_out_fee: uint256 = _new_out_fee
    new_admin_fee: uint256 = _new_admin_fee
    new_fee_gamma: uint256 = _new_fee_gamma
    new_allowed_extra_profit: uint256 = _new_allowed_extra_profit
    new_adjustment_step: uint256 = _new_adjustment_step
    new_ma_half_time: uint256 = _new_ma_half_time

    # Fees
    if new_out_fee < MAX_FEE+1:
        assert new_out_fee > MIN_FEE-1  # dev: fee is out of range
    else:
        new_out_fee = self.out_fee
    if new_mid_fee > MAX_FEE:
        new_mid_fee = self.mid_fee
    assert new_mid_fee <= new_out_fee  # dev: mid-fee is too high
    if new_admin_fee > MAX_ADMIN_FEE:
        new_admin_fee = self.admin_fee

    # AMM parameters
    if new_fee_gamma < 10**18:
        assert new_fee_gamma > 0  # dev: fee_gamma out of range [1 .. 10**18]
    else:
        new_fee_gamma = self.fee_gamma
    if new_allowed_extra_profit > 10**18:
        new_allowed_extra_profit = self.allowed_extra_profit
    if new_adjustment_step > 10**18:
        new_adjustment_step = self.adjustment_step

    # MA
    if new_ma_half_time < 7*86400:
        assert new_ma_half_time > 0  # dev: MA time should be longer than 1 second
    else:
        new_ma_half_time = self.ma_half_time

    _deadline: uint256 = block.timestamp + ADMIN_ACTIONS_DELAY
    self.admin_actions_deadline = _deadline

    self.future_admin_fee = new_admin_fee
    self.future_mid_fee = new_mid_fee
    self.future_out_fee = new_out_fee
    self.future_fee_gamma = new_fee_gamma
    self.future_allowed_extra_profit = new_allowed_extra_profit
    self.future_adjustment_step = new_adjustment_step
    self.future_ma_half_time = new_ma_half_time

    log CommitNewParameters(_deadline, new_admin_fee, new_mid_fee, new_out_fee,
                            new_fee_gamma,
                            new_allowed_extra_profit, new_adjustment_step,
                            new_ma_half_time)


@external
@nonreentrant('lock')
def apply_new_parameters():
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner
    assert block.timestamp >= self.admin_actions_deadline  # dev: insufficient time
    assert self.admin_actions_deadline != 0  # dev: no active action

    self.admin_actions_deadline = 0

    admin_fee: uint256 = self.future_admin_fee
    if self.admin_fee != admin_fee:
        self._claim_admin_fees()
        self.admin_fee = admin_fee

    mid_fee: uint256 = self.future_mid_fee
    self.mid_fee = mid_fee
    out_fee: uint256 = self.future_out_fee
    self.out_fee = out_fee
    fee_gamma: uint256 = self.future_fee_gamma
    self.fee_gamma = fee_gamma
    allowed_extra_profit: uint256 = self.future_allowed_extra_profit
    self.allowed_extra_profit = allowed_extra_profit
    adjustment_step: uint256 = self.future_adjustment_step
    self.adjustment_step = adjustment_step
    ma_half_time: uint256 = self.future_ma_half_time
    self.ma_half_time = ma_half_time

    log NewParameters(admin_fee, mid_fee, out_fee,
                      fee_gamma,
                      allowed_extra_profit, adjustment_step,
                      ma_half_time)


@external
def revert_new_parameters():
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner

    self.admin_actions_deadline = 0


# View Methods


@external
@view
def get_dy(i: uint256, j: uint256, dx: uint256) -> uint256:
    assert i != j  # dev: same input and output coin
    assert i < N_COINS  # dev: coin index out of range
    assert j < N_COINS  # dev: coin index out of range

    precisions: uint256[2] = self._get_precisions()

    price_scale: uint256 = self.price_scale * precisions[1]
    xp: uint256[N_COINS] = self.balances

    A_gamma: uint256[2] = self._A_gamma()
    D: uint256 = self.D
    if self.future_A_gamma_time > 0:
        D = self.newton_D(A_gamma[0], A_gamma[1], self.xp())

    xp[i] += dx
    xp = [xp[0] * precisions[0], xp[1] * price_scale / PRECISION]

    y: uint256 = self.newton_y(A_gamma[0], A_gamma[1], xp, D, j)
    dy: uint256 = xp[j] - y - 1
    xp[j] = y
    if j > 0:
        dy = dy * PRECISION / price_scale
    else:
        dy /= precisions[0]
    dy -= self._fee(xp) * dy / 10**10

    return dy


@view
@external
def calc_token_amount(amounts: uint256[N_COINS]) -> uint256:
    token_supply: uint256 = CurveToken(self.token).totalSupply()
    precisions: uint256[2] = self._get_precisions()
    price_scale: uint256 = self.price_scale * precisions[1]
    A_gamma: uint256[2] = self._A_gamma()
    xp: uint256[N_COINS] = self.xp()
    amountsp: uint256[N_COINS] = [
        amounts[0] * precisions[0],
        amounts[1] * price_scale / PRECISION]
    D0: uint256 = self.D
    if self.future_A_gamma_time > 0:
        D0 = self.newton_D(A_gamma[0], A_gamma[1], xp)
    xp[0] += amountsp[0]
    xp[1] += amountsp[1]
    D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], xp)
    d_token: uint256 = token_supply * D / D0 - token_supply
    d_token -= self._calc_token_fee(amountsp, xp) * d_token / 10**10 + 1
    return d_token


@view
@external
def calc_withdraw_one_coin(token_amount: uint256, i: uint256) -> uint256:
    return self._calc_withdraw_one_coin(self._A_gamma(), token_amount, i, True, False)[0]


@external
@view
def lp_price() -> uint256:
    """
    Approximate LP token price
    """
    return 2 * self.virtual_price * self.sqrt_int(self.internal_price_oracle()) / 10**18


@view
@external
def A() -> uint256:
    return self._A_gamma()[0]


@view
@external
def gamma() -> uint256:
    return self._A_gamma()[1]


@external
@view
def fee() -> uint256:
    return self._fee(self.xp())


@external
@view
def get_virtual_price() -> uint256:
    return 10**18 * self.get_xcp(self.D) / CurveToken(self.token).totalSupply()


@external
@view
def price_oracle() -> uint256:
    return self.internal_price_oracle()


# Initializer


@external
def initialize(
    A: uint256,
    gamma: uint256,
    mid_fee: uint256,
    out_fee: uint256,
    allowed_extra_profit: uint256,
    fee_gamma: uint256,
    adjustment_step: uint256,
    admin_fee: uint256,
    ma_half_time: uint256,
    initial_price: uint256,
    _token: address,
    _coins: address[N_COINS],
    _precisions: uint256,
):
    assert self.mid_fee == 0  # dev: check that we call it from factory

    self.factory = msg.sender

    # Pack A and gamma:
    # shifted A + gamma
    A_gamma: uint256 = shift(A, 128)
    A_gamma = bitwise_or(A_gamma, gamma)
    self.initial_A_gamma = A_gamma
    self.future_A_gamma = A_gamma

    self.mid_fee = mid_fee
    self.out_fee = out_fee
    self.allowed_extra_profit = allowed_extra_profit
    self.fee_gamma = fee_gamma
    self.adjustment_step = adjustment_step
    self.admin_fee = admin_fee

    self.price_scale = initial_price
    self._price_oracle = initial_price
    self.last_prices = initial_price
    self.last_prices_timestamp = block.timestamp
    self.ma_half_time = ma_half_time

    self.xcp_profit_a = 10**18

    self.token = _token
    self.coins = _coins
    self.PRECISIONS = _precisions

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

// File: @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: @openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol


// OpenZeppelin Contracts (last updated v4.8.1) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// File: @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// File: @openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol


// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}

// File: @openzeppelin/contracts/token/ERC20/extensions/draft-IERC20Permit.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// File: @openzeppelin/contracts/utils/Address.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: @openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol


// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;



/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: @openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol


// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    function __Pausable_init() internal onlyInitializing {
        __Pausable_init_unchained();
    }

    function __Pausable_init_unchained() internal onlyInitializing {
        _paused = false;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        require(!paused(), "Pausable: paused");
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        require(paused(), "Pausable: not paused");
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// File: contracts/interfaces/IOpenOceanCaller.sol


pragma solidity ^0.8.0;


interface IOpenOceanCaller {
    struct CallDescription {
        uint256 target;
        uint256 gasLimit;
        uint256 value;
        bytes data;
    }

    function makeCall(CallDescription memory desc) external;

    function makeCalls(CallDescription[] memory desc) external payable;
}

// File: contracts/libraries/RevertReasonParser.sol


pragma solidity ^0.8.0;

library RevertReasonParser {
    function parse(bytes memory data, string memory prefix) internal pure returns (string memory) {
        // https://solidity.readthedocs.io/en/latest/control-structures.html#revert
        // We assume that revert reason is abi-encoded as Error(string)

        // 68 = 4-byte selector 0x08c379a0 + 32 bytes offset + 32 bytes length
        if (data.length >= 68 && data[0] == "\x08" && data[1] == "\xc3" && data[2] == "\x79" && data[3] == "\xa0") {
            string memory reason;
            // solhint-disable no-inline-assembly
            assembly {
                // 68 = 32 bytes data length + 4-byte selector + 32 bytes offset
                reason := add(data, 68)
            }
            /*
                revert reason is padded up to 32 bytes with ABI encoder: Error(string)
                also sometimes there is extra 32 bytes of zeros padded in the end:
                https://github.com/ethereum/solidity/issues/10170
                because of that we can't check for equality and instead check
                that string length + extra 68 bytes is less than overall data length
            */
            require(data.length >= 68 + bytes(reason).length, "Invalid revert reason");
            return string(abi.encodePacked(prefix, "Error(", reason, ")"));
        }
        // 36 = 4-byte selector 0x4e487b71 + 32 bytes integer
        else if (data.length == 36 && data[0] == "\x4e" && data[1] == "\x48" && data[2] == "\x7b" && data[3] == "\x71") {
            uint256 code;
            // solhint-disable no-inline-assembly
            assembly {
                // 36 = 32 bytes data length + 4-byte selector
                code := mload(add(data, 36))
            }
            return string(abi.encodePacked(prefix, "Panic(", _toHex(code), ")"));
        }

        return string(abi.encodePacked(prefix, "Unknown()"));
    }

    function _toHex(uint256 value) private pure returns (string memory) {
        return _toHex(abi.encodePacked(value));
    }

    function _toHex(bytes memory data) private pure returns (string memory) {
        bytes memory alphabet = "0123456789abcdef";
        bytes memory str = new bytes(2 + data.length * 2);
        str[0] = "0";
        str[1] = "x";
        for (uint256 i = 0; i < data.length; i++) {
            str[2 * i + 2] = alphabet[uint8(data[i] >> 4)];
            str[2 * i + 3] = alphabet[uint8(data[i] & 0x0f)];
        }
        return string(str);
    }
}

// File: @openzeppelin/contracts/utils/math/SafeMath.sol


// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
 * @dev Wrappers over Solidity's arithmetic operations.
 *
 * NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
 * now has built in overflow checking.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        return a + b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        return a * b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator.
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b <= a, errorMessage);
            return a - b;
        }
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a / b;
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        unchecked {
            require(b > 0, errorMessage);
            return a % b;
        }
    }
}

// File: contracts/libraries/UniversalERC20.sol


pragma solidity ^0.8.0;



library UniversalERC20 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    IERC20 internal constant ZERO_ADDRESS = IERC20(0x0000000000000000000000000000000000000000);
    IERC20 internal constant ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 internal constant MATIC_ADDRESS = IERC20(0x0000000000000000000000000000000000001010);

    function universalTransfer(
        IERC20 token,
        address payable to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                (bool result, ) = to.call{value: amount}("");
                require(result, "Failed to transfer ETH");
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }

    function universalApprove(
        IERC20 token,
        address to,
        uint256 amount
    ) internal {
        require(!isETH(token), "Approve called on ETH");

        if (amount == 0) {
            token.safeApprove(to, 0);
        } else {
            uint256 allowance = token.allowance(address(this), to);
            if (allowance < amount) {
                if (allowance > 0) {
                    token.safeApprove(to, 0);
                }
                token.safeApprove(to, amount);
            }
        }
    }

    function universalBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    function isETH(IERC20 token) internal pure returns (bool) {
        return
            address(token) == address(ETH_ADDRESS) ||
            address(token) == address(MATIC_ADDRESS) ||
            address(token) == address(ZERO_ADDRESS);
    }
}

// File: contracts/libraries/Permitable.sol


pragma solidity ^0.8.0;

/// @title Interface for DAI-style permits
interface IDaiLikePermit {
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

/// @title SignatureTransfer
/// @notice Handles ERC20 token transfers through signature based actions
/// @dev Requires user's token approval on the Permit2 contract
interface IPermit2 {
    /// @notice The token and amount details for a transfer signed in the permit transfer signature
    struct TokenPermissions {
        // ERC20 token address
        address token;
        // the maximum amount that can be spent
        uint256 amount;
    }

    /// @notice The signed permit message for a single token transfer
    struct PermitTransferFrom {
        TokenPermissions permitted;
        // a unique value for every token owner's signature to prevent signature replays
        uint256 nonce;
        // deadline on the permit signature
        uint256 deadline;
    }

    /// @notice Specifies the recipient address and amount for batched transfers.
    /// @dev Recipients and amounts correspond to the index of the signed token permissions array.
    /// @dev Reverts if the requested amount is greater than the permitted signed amount.
    struct SignatureTransferDetails {
        // recipient address
        address to;
        // spender requested amount
        uint256 requestedAmount;
    }

    /// @notice A map from token owner address and a caller specified word index to a bitmap. Used to set bits in the bitmap to prevent against signature replay protection
    /// @dev Uses unordered nonces so that permit messages do not need to be spent in a certain order
    /// @dev The mapping is indexed first by the token owner, then by an index specified in the nonce
    /// @dev It returns a uint256 bitmap
    /// @dev The index, or wordPosition is capped at type(uint248).max
    function nonceBitmap(address, uint256) external view returns (uint256);

    /// @notice Transfers a token using a signed permit message
    /// @dev Reverts if the requested amount is greater than the permitted signed amount
    /// @param permit The permit data signed over by the owner
    /// @param owner The owner of the tokens to transfer
    /// @param transferDetails The spender's requested transfer details for the permitted token
    /// @param signature The signature to verify
    function permitTransferFrom(
        PermitTransferFrom memory permit,
        SignatureTransferDetails calldata transferDetails,
        address owner,
        bytes calldata signature
    ) external;

    /// @notice Returns the domain separator for the current chain.
    /// @dev Uses cached version if chainid and address are unchanged from construction.
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

/// @title Base contract with common permit handling logics
contract Permitable {
    address public permit2;

    function permit2DomainSeperator() external view returns (bytes32) {
        return IPermit2(permit2).DOMAIN_SEPARATOR();
    }

    function _permit(address token, bytes calldata permit, bool claim) internal returns (bool) {
        if (permit.length > 0) {
            if (permit.length == 32 * 7 || permit.length == 32 * 8) {
                _permit(token, permit);
                return false;
            } else if (claim) {
                _permit2(permit);
                return true;
            }
        }
        return false;
    }

    function _isPermit2(bytes calldata permit) internal pure returns (bool) {
        return permit.length == 32 * 11 || permit.length == 32 * 12;
    }

    function _permit(address token, bytes calldata permit) private returns (bool success, bytes memory result) {
        if (permit.length == 32 * 7) {
            // solhint-disable-next-line avoid-low-level-calls
            (success, result) = token.call(abi.encodePacked(IERC20Permit.permit.selector, permit));
        } else if (permit.length == 32 * 8) {
            // solhint-disable-next-line avoid-low-level-calls
            (success, result) = token.call(abi.encodePacked(IDaiLikePermit.permit.selector, permit));
        }
        if (!success) {
            revert(RevertReasonParser.parse(result, "Permit failed: "));
        }
    }

    function _permit2(bytes calldata permit) internal returns (bool success, bytes memory result) {
        // solhint-disable-next-line avoid-low-level-calls
        (success, result) = permit2.call(abi.encodePacked(IPermit2.permitTransferFrom.selector, permit)); // TODO support batch permit
        if (!success) {
            revert(RevertReasonParser.parse(result, "Permit2 failed: "));
        }
    }

    /// @notice Finds the next valid nonce for a user, starting from 0.
    /// @param owner The owner of the nonces
    /// @return nonce The first valid nonce starting from 0
    function permit2NextNonce(address owner) external view returns (uint256 nonce) {
        nonce = _permit2NextNonce(owner, 0, 0);
    }

    /// @notice Finds the next valid nonce for a user, after from a given nonce.
    /// @dev This can be helpful if you're signing multiple nonces in a row and need the next nonce to sign but the start one is still valid.
    /// @param owner The owner of the nonces
    /// @param start The nonce to start from
    /// @return nonce The first valid nonce after the given nonce
    function permit2NextNonceAfter(address owner, uint256 start) external view returns (uint256 nonce) {
        uint248 word = uint248(start >> 8);
        uint8 pos = uint8(start);
        if (pos == type(uint8).max) {
            // If the position is 255, we need to move to the next word
            word++;
            pos = 0;
        } else {
            // Otherwise, we just move to the next position
            pos++;
        }
        nonce = _permit2NextNonce(owner, word, pos);
    }

    /// @notice Finds the next valid nonce for a user, starting from a given word and position.
    /// @param owner The owner of the nonces
    /// @param word Word to start looking from
    /// @param pos Position inside the word to start looking from
    function _permit2NextNonce(address owner, uint248 word, uint8 pos) internal view returns (uint256 nonce) {
        while (true) {
            uint256 bitmap = IPermit2(permit2).nonceBitmap(owner, word);

            // Check if the bitmap is completely full
            if (bitmap == type(uint256).max) {
                // If so, move to the next word
                ++word;
                pos = 0;
                continue;
            }
            if (pos != 0) {
                // If the position is not 0, we need to shift the bitmap to ignore the bits before position
                bitmap = bitmap >> pos;
            }
            // Find the first zero bit in the bitmap
            while (bitmap & 1 == 1) {
                bitmap = bitmap >> 1;
                ++pos;
            }

            return _permit2NonceFromWordAndPos(word, pos);
        }
    }

    /// @notice Constructs a nonce from a word and a position inside the word
    /// @param word The word containing the nonce
    /// @param pos The position of the nonce inside the word
    /// @return nonce The nonce constructed from the word and position
    function _permit2NonceFromWordAndPos(uint248 word, uint8 pos) internal pure returns (uint256 nonce) {
        // The last 248 bits of the word are the nonce bits
        nonce = uint256(word) << 8;
        // The first 8 bits of the word are the position inside the word
        nonce |= pos;
    }
}

// File: contracts/libraries/EthRejector.sol


pragma solidity ^0.8.0;

abstract contract EthRejector {
    receive() external payable {
        // require(msg.sender != tx.origin, "ETH deposit rejected");
    }
}

// File: contracts/UniswapV2Exchange.sol



pragma solidity ^0.8.0;


contract UniswapV2Exchange is EthRejector, Permitable {
    uint256 private constant TRANSFER_FROM_CALL_SELECTOR_32 = 0x23b872dd00000000000000000000000000000000000000000000000000000000;
    uint256 private constant WETH_DEPOSIT_CALL_SELECTOR_32 = 0xd0e30db000000000000000000000000000000000000000000000000000000000;
    uint256 private constant WETH_WITHDRAW_CALL_SELECTOR_32 = 0x2e1a7d4d00000000000000000000000000000000000000000000000000000000;
    uint256 private constant ERC20_TRANSFER_CALL_SELECTOR_32 = 0xa9059cbb00000000000000000000000000000000000000000000000000000000;
    uint256 private constant ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant REVERSE_MASK = 0x8000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant WETH_MASK = 0x4000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant NUMERATOR_MASK = 0x0000000000000000ffffffff0000000000000000000000000000000000000000;
    uint256 private constant WETH = 0x000000000000000000000000C02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    uint256 private constant UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32 =
        0x0902f1ac00000000000000000000000000000000000000000000000000000000;
    uint256 private constant UNISWAP_PAIR_SWAP_CALL_SELECTOR_32 =
        0x022c0d9f00000000000000000000000000000000000000000000000000000000;
    uint256 private constant DENOMINATOR = 1000000000;
    uint256 private constant NUMERATOR_OFFSET = 160;

    function callUniswapToWithPermit(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata pools,
        bytes calldata permit,
        address payable recipient
    ) external returns (uint256 returnAmount) {
        bool claimed = _permit(address(srcToken), permit, true);
        return _callUniswap(srcToken, amount, minReturn, pools, recipient, claimed);
    }

    function callUniswapWithPermit(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata pools,
        bytes calldata permit
    ) external returns (uint256 returnAmount) {
        bool claimed = _permit(address(srcToken), permit, true);
        return _callUniswap(srcToken, amount, minReturn, pools, payable(msg.sender), claimed);
    }

    function callUniswapTo(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata pools,
        address payable recipient
    ) external payable returns (uint256 returnAmount) {
        return _callUniswap(srcToken, amount, minReturn, pools, recipient, false);
    }

    function callUniswap(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata pools
    ) external payable returns (uint256 returnAmount) {
        return _callUniswap(srcToken, amount, minReturn, pools, payable(msg.sender), false);
    }

    function _callUniswap(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        bytes32[] calldata /* pools */,
        address payable recipient,
        bool claimed
    ) internal returns (uint256 returnAmount) {
        assembly {
            // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function revertWithReason(m, len) {
                mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(0x20, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(0x40, m)
                revert(0, len)
            }

            function swap(emptyPtr, swapAmount, pair, reversed, numerator, dst) -> ret {
                mstore(emptyPtr, UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32)
                if iszero(staticcall(gas(), pair, emptyPtr, 0x4, emptyPtr, 0x40)) {
                    reRevert()
                }

                let reserve0 := mload(emptyPtr)
                let reserve1 := mload(add(emptyPtr, 0x20))
                if reversed {
                    let tmp := reserve0
                    reserve0 := reserve1
                    reserve1 := tmp
                }
                ret := mul(swapAmount, numerator)
                ret := div(mul(ret, reserve1), add(ret, mul(reserve0, DENOMINATOR)))

                mstore(emptyPtr, UNISWAP_PAIR_SWAP_CALL_SELECTOR_32)
                switch reversed
                case 0 {
                    mstore(add(emptyPtr, 0x04), 0)
                    mstore(add(emptyPtr, 0x24), ret)
                }
                default {
                    mstore(add(emptyPtr, 0x04), ret)
                    mstore(add(emptyPtr, 0x24), 0)
                }
                mstore(add(emptyPtr, 0x44), dst)
                mstore(add(emptyPtr, 0x64), 0x80)
                mstore(add(emptyPtr, 0x84), 0)
                if iszero(call(gas(), pair, 0, emptyPtr, 0xa4, 0, 0)) {
                    reRevert()
                }
            }

            function callSwap(emptyPtr, token, srcAmount, swapCaller, receiver, min, claim) -> ret {
                let poolsOffset := add(calldataload(0x64), 0x4)
                let poolsEndOffset := calldataload(poolsOffset)
                poolsOffset := add(poolsOffset, 0x20)
                poolsEndOffset := add(poolsOffset, mul(0x20, poolsEndOffset))
                let rawPair := calldataload(poolsOffset)
                switch token
                case 0 {
                    if iszero(eq(srcAmount, callvalue())) {
                        revertWithReason(0x00000011696e76616c6964206d73672e76616c75650000000000000000000000, 0x55) // "invalid msg.value"
                    }

                    mstore(emptyPtr, WETH_DEPOSIT_CALL_SELECTOR_32)
                    if iszero(call(gas(), WETH, srcAmount, emptyPtr, 0x4, 0, 0)) {
                        reRevert()
                    }

                    mstore(emptyPtr, ERC20_TRANSFER_CALL_SELECTOR_32)
                    mstore(add(emptyPtr, 0x4), and(rawPair, ADDRESS_MASK))
                    mstore(add(emptyPtr, 0x24), srcAmount)
                    if iszero(call(gas(), WETH, 0, emptyPtr, 0x44, 0, 0)) {
                        reRevert()
                    }
                }
                default {
                    if callvalue() {
                        revertWithReason(0x00000011696e76616c6964206d73672e76616c75650000000000000000000000, 0x55) // "invalid msg.value"
                    }

                    if claim {
                        mstore(emptyPtr, TRANSFER_FROM_CALL_SELECTOR_32)
                        mstore(add(emptyPtr, 0x4), swapCaller)
                        mstore(add(emptyPtr, 0x24), and(rawPair, ADDRESS_MASK))
                        mstore(add(emptyPtr, 0x44), srcAmount)
                        if iszero(call(gas(), token, 0, emptyPtr, 0x64, 0, 0)) {
                            reRevert()
                        }
                    }
                }

                ret := srcAmount

                for {
                    let i := add(poolsOffset, 0x20)
                } lt(i, poolsEndOffset) {
                    i := add(i, 0x20)
                } {
                    let nextRawPair := calldataload(i)

                    ret := swap(
                        emptyPtr,
                        ret,
                        and(rawPair, ADDRESS_MASK),
                        and(rawPair, REVERSE_MASK),
                        shr(NUMERATOR_OFFSET, and(rawPair, NUMERATOR_MASK)),
                        and(nextRawPair, ADDRESS_MASK)
                    )

                    rawPair := nextRawPair
                }

                ret := swap(
                    emptyPtr,
                    ret,
                    and(rawPair, ADDRESS_MASK),
                    and(rawPair, REVERSE_MASK),
                    shr(NUMERATOR_OFFSET, and(rawPair, NUMERATOR_MASK)),
                    address()
                )

                if lt(ret, min) {
                    revertWithReason(0x000000164d696e2072657475726e206e6f742072656163686564000000000000, 0x5a) // "Min return not reached"
                }

                mstore(emptyPtr, 0xd21220a700000000000000000000000000000000000000000000000000000000)
                if and(rawPair, REVERSE_MASK) {
                    mstore(emptyPtr, 0x0dfe168100000000000000000000000000000000000000000000000000000000)
                }
                if iszero(staticcall(gas(), and(rawPair, ADDRESS_MASK), emptyPtr, 0x4, emptyPtr, 0x40)) {
                    reRevert()
                }
                let dstToken := mload(emptyPtr)

                let finalAmount := div(
                    mul(calldataload(0x44), 0x2710),
                    sub(
                        10000,
                        shr(
                            232,
                            and(
                                calldataload(add(add(calldataload(0x64), 0x4), 0x20)),
                                0x00ffff0000000000000000000000000000000000000000000000000000000000
                            )
                        )
                    )
                )
                switch gt(ret, finalAmount)
                case 1 {
                    switch and(rawPair, WETH_MASK)
                    case 0 {
                        mstore(emptyPtr, ERC20_TRANSFER_CALL_SELECTOR_32)
                        mstore(add(emptyPtr, 0x4), receiver)
                        mstore(add(emptyPtr, 0x24), finalAmount)
                        if iszero(call(gas(), dstToken, 0, emptyPtr, 0x44, 0, 0)) {
                            reRevert()
                        }

                        mstore(add(emptyPtr, 0x4), 0x922164BBBd36Acf9E854AcBbF32faCC949fCAEef)
                        mstore(add(emptyPtr, 0x24), sub(ret, finalAmount))
                        if iszero(call(gas(), dstToken, 0, emptyPtr, 0x44, 0, 0)) {
                            reRevert()
                        }
                    }
                    default {
                        mstore(emptyPtr, WETH_WITHDRAW_CALL_SELECTOR_32)
                        mstore(add(emptyPtr, 0x04), ret)
                        if iszero(call(gas(), WETH, 0, emptyPtr, 0x24, 0, 0)) {
                            reRevert()
                        }

                        if iszero(call(gas(), receiver, finalAmount, 0, 0, 0, 0)) {
                            reRevert()
                        }

                        if iszero(call(gas(), 0x922164BBBd36Acf9E854AcBbF32faCC949fCAEef, sub(ret, finalAmount), 0, 0, 0, 0)) {
                            reRevert()
                        }
                    }
                }
                default {
                    switch and(rawPair, WETH_MASK)
                    case 0 {
                        mstore(emptyPtr, ERC20_TRANSFER_CALL_SELECTOR_32)
                        mstore(add(emptyPtr, 0x4), receiver)
                        mstore(add(emptyPtr, 0x24), ret)
                        if iszero(call(gas(), dstToken, 0, emptyPtr, 0x44, 0, 0)) {
                            reRevert()
                        }
                    }
                    default {
                        mstore(emptyPtr, WETH_WITHDRAW_CALL_SELECTOR_32)
                        mstore(add(emptyPtr, 0x04), ret)
                        if iszero(call(gas(), WETH, 0, emptyPtr, 0x24, 0, 0)) {
                            reRevert()
                        }

                        if iszero(call(gas(), receiver, ret, 0, 0, 0, 0)) {
                            reRevert()
                        }
                    }
                }
            }

            let emptyPtr := mload(0x40)
            mstore(0x40, add(emptyPtr, 0xc0))
            returnAmount := callSwap(emptyPtr, srcToken, amount, caller(), recipient, minReturn, eq(claimed, 0))
        }
    }
}

// File: @openzeppelin/contracts/utils/math/SafeCast.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// File: contracts/interfaces/IUniswapV3.sol


pragma solidity ^0.8.0;
pragma experimental ABIEncoderV2;

interface IUniswapV3Pool {
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

/// @title Callback for IAlgebraPoolActions#swap
/// @notice Any contract that calls IAlgebraPoolActions#swap must implement this interface
/// @dev Credit to Uniswap Labs under GPL-2.0-or-later license:
/// https://github.com/Uniswap/v3-core/tree/main/contracts/interfaces
interface IAlgebraSwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IAlgebraPool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a AlgebraPool deployed by the canonical AlgebraFactory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IAlgebraPoolActions#swap call
    function algebraSwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

/// @title Callback for IPancakeV3PoolActions#swap
/// @notice Any contract that calls IPancakeV3PoolActions#swap must implement this interface
interface IPancakeV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IPancakeV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a PancakeV3Pool deployed by the canonical PancakeV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IPancakeV3PoolActions#swap call
    function pancakeV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

/// @title Callback for IRamsesV2PoolActions#swap
/// @notice Any contract that calls IRamsesV2PoolActions#swap must implement this interface
interface IRamsesV2SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IRamsesV2Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a RamsesV2Pool deployed by the canonical RamsesV2Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IRamsesV2PoolActions#swap call
    function ramsesV2SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

/// @title Callback for IAgniPoolActions#swap
/// @notice Any contract that calls IAgniPoolActions#swap must implement this interface
interface IAgniSwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IAgniPool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a AgniPool deployed by the canonical AgniFactory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IAgniPoolActions#swap call
    function agniSwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

/// @title Callback for IFusionXV3PoolActions#swap
/// @notice Any contract that calls IFusionXV3PoolActions#swap must implement this interface
interface IFusionXV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IFusionXV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a FusionXV3Pool deployed by the canonical FusionXV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IFusionXV3PoolActions#swap call
    function fusionXV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

/// @title Callback for ISupV3PoolActions#swap
/// @notice Any contract that calls ISupV3PoolActions#swap must implement this interface
interface ISupV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via ISupV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a SUPV3Pool deployed by the canonical SupV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the ISupV3PoolActions#swap call
    function supV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}
/// @title Callback for IZebraV3PoolActions#swap
/// @notice Any contract that calls IZebraV3PoolActions#swap must implement this interface
interface IZebraV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IZebraV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a ZebraV3Pool deployed by the canonical ZebraV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IZebraV3PoolActions#swap call
    function zebraV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}
/// @title Callback for IKellerPoolActions#swap
/// @notice Any contract that calls IKellerPoolActions#swap must implement this interface
interface IKellerSwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IKellerPool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a KellerPool deployed by the canonical KellerFactory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IKellerPoolActions#swap call
    function KellerSwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata data) external;
}

// File: contracts/interfaces/IWETH.sol


pragma solidity ^0.8.0;

/// @title Interface for WETH tokens
interface IWETH is IERC20 {
    function deposit() external payable;

    function withdraw(uint256 amount) external;
}

// File: contracts/UniswapV3Exchange.sol


pragma solidity ^0.8.0;






contract UniswapV3Exchange is EthRejector, Permitable, IUniswapV3SwapCallback {
    using Address for address payable;
    using SafeERC20 for IERC20;
    using SafeMath for uint256;

    uint256 private constant _ONE_FOR_ZERO_MASK = 1 << 255;
    uint256 private constant _WETH_WRAP_MASK = 1 << 254;
    uint256 private constant _WETH_UNWRAP_MASK = 1 << 253;
    bytes32 private constant _POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
    bytes32 private constant _FF_FACTORY = 0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000;
    bytes32 private constant _SELECTORS = 0x0dfe1681d21220a7ddca3f430000000000000000000000000000000000000000;
    uint256 private constant _ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 private constant _MIN_SQRT_RATIO = 4295128739 + 1;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 private constant _MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342 - 1;
    /// @dev Change for different chains
    address private constant _WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;

    /// @notice Same as `uniswapV3SwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swap funds
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// @param srcToken Source token
    /// See tests for examples
    function uniswapV3SwapToWithPermit(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit,
        IERC20 srcToken
    ) external returns (uint256 returnAmount) {
        _permit(address(srcToken), permit, false);
        return _uniswapV3Swap(recipient, amount, minReturn, pools, permit);
    }

    /// @notice Performs swap using Uniswap V3 exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3SwapTo(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns (uint256 returnAmount) {
        return _uniswapV3Swap(recipient, amount, minReturn, pools, new bytes(0));
    }

    function _uniswapV3Swap(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes memory permit
    ) internal returns (uint256 returnAmount) {
        uint256 len = pools.length;
        address dstToken;
        require(len > 0, "UniswapV3: empty pools");
        uint256 lastIndex = len - 1;
        returnAmount = amount;
        bool wrapWeth = pools[0] & _WETH_WRAP_MASK > 0;
        bool unwrapWeth = pools[lastIndex] & _WETH_UNWRAP_MASK > 0;
        if (wrapWeth) {
            require(msg.value == amount, "UniswapV3: wrong msg.value");
            IWETH(_WETH).deposit{value: amount}();
        } else {
            require(msg.value == 0, "UniswapV3: msg.value should be 0");
        }
        if (len > 1) {
            (returnAmount, ) = _makeSwap(address(this), wrapWeth ? address(this) : msg.sender, pools[0], returnAmount, permit);
            for (uint256 i = 1; i < lastIndex; i++) {
                (returnAmount, ) = _makeSwap(address(this), address(this), pools[i], returnAmount, permit);
            }
            (returnAmount, dstToken) = _makeSwap(address(this), address(this), pools[lastIndex], returnAmount, permit);
        } else {
            (returnAmount, dstToken) = _makeSwap(
                address(this),
                wrapWeth ? address(this) : msg.sender,
                pools[0],
                returnAmount,
                permit
            );
        }

        require(returnAmount >= minReturn, "UniswapV3: min return");

        assembly {
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function run(_returnAmount, _recipient, _unwrapWeth, _dstToken) {
                let slp := shr(
                    232,
                    and(
                        calldataload(add(add(calldataload(0x64), 0x4), 0x20)),
                        0x00ffff0000000000000000000000000000000000000000000000000000000000
                    )
                )
                let finalAmount := div(mul(calldataload(0x44), 0x2710), sub(10000, slp))
                let emptyPtr := mload(0x40)
                switch gt(_returnAmount, finalAmount)
                case 1 {
                    switch _unwrapWeth
                    case 0 {
                        mstore(emptyPtr, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
                        mstore(add(emptyPtr, 0x4), _recipient)
                        mstore(add(emptyPtr, 0x24), finalAmount)
                        if iszero(call(gas(), _dstToken, 0, emptyPtr, 0x44, 0, 0)) {
                            reRevert()
                        }

                        mstore(add(emptyPtr, 0x4), 0x922164BBBd36Acf9E854AcBbF32faCC949fCAEef)
                        mstore(add(emptyPtr, 0x24), sub(_returnAmount, finalAmount))
                        if iszero(call(gas(), _dstToken, 0, emptyPtr, 0x44, 0, 0)) {
                            reRevert()
                        }
                    }
                    default {
                        mstore(emptyPtr, 0x2e1a7d4d00000000000000000000000000000000000000000000000000000000)
                        mstore(add(emptyPtr, 0x04), _returnAmount)
                        if iszero(
                            call(gas(), 0x000000000000000000000000C02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, 0, emptyPtr, 0x24, 0, 0)
                        ) {
                            reRevert()
                        }

                        if iszero(call(gas(), _recipient, finalAmount, 0, 0, 0, 0)) {
                            reRevert()
                        }

                        if iszero(
                            call(gas(), 0x922164BBBd36Acf9E854AcBbF32faCC949fCAEef, sub(_returnAmount, finalAmount), 0, 0, 0, 0)
                        ) {
                            reRevert()
                        }
                    }
                }
                default {
                    switch _unwrapWeth
                    case 0 {
                        mstore(emptyPtr, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
                        mstore(add(emptyPtr, 0x4), _recipient)
                        mstore(add(emptyPtr, 0x24), _returnAmount)
                        if iszero(call(gas(), _dstToken, 0, emptyPtr, 0x44, 0, 0)) {
                            reRevert()
                        }
                    }
                    default {
                        mstore(emptyPtr, 0x2e1a7d4d00000000000000000000000000000000000000000000000000000000)
                        mstore(add(emptyPtr, 0x04), _returnAmount)
                        if iszero(
                            call(gas(), 0x000000000000000000000000C02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2, 0, emptyPtr, 0x24, 0, 0)
                        ) {
                            reRevert()
                        }

                        if iszero(call(gas(), _recipient, _returnAmount, 0, 0, 0, 0)) {
                            reRevert()
                        }
                    }
                }
            }

            run(returnAmount, recipient, unwrapWeth, dstToken)
        }
    }

    /// @inheritdoc IUniswapV3SwapCallback
    function uniswapV3SwapCallback(int256 amount0Delta, int256 amount1Delta, bytes calldata /*data*/) external override {
        IERC20 token0;
        IERC20 token1;
        bytes32 ffFactoryAddress = _FF_FACTORY;
        bytes32 poolInitCodeHash = _POOL_INIT_CODE_HASH;
        address payer;
        bytes calldata permit;

        assembly {
            // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function revertWithReason(m, len) {
                mstore(0x00, 0x08c379a000000000000000000000000000000000000000000000000000000000)
                mstore(0x20, 0x0000002000000000000000000000000000000000000000000000000000000000)
                mstore(0x40, m)
                revert(0, len)
            }

            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 0x20)
            mstore(emptyPtr, _SELECTORS)

            if iszero(staticcall(gas(), caller(), emptyPtr, 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            token0 := mload(resultPtr)
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x4), 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            token1 := mload(resultPtr)
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x8), 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            let fee := mload(resultPtr)

            let p := emptyPtr
            mstore(p, ffFactoryAddress)
            p := add(p, 21)
            // Compute the inner hash in-place
            mstore(p, token0)
            mstore(add(p, 32), token1)
            mstore(add(p, 64), fee)
            mstore(p, keccak256(p, 96))
            p := add(p, 32)
            mstore(p, poolInitCodeHash)
            let pool := and(keccak256(emptyPtr, 85), _ADDRESS_MASK)

            if iszero(eq(pool, caller())) {
                revertWithReason(0x00000010554e495633523a2062616420706f6f6c000000000000000000000000, 0x54) // UniswapV3: bad pool
            }

            // calldatacopy(emptyPtr, 0x84, 0x20)
            payer := and(calldataload(0x84), _ADDRESS_MASK)
            permit.length := sub(calldatasize(), 0xa4)
            permit.offset := 0xa4
        }

        if (amount0Delta > 0) {
            if (payer == address(this)) {
                token0.safeTransfer(msg.sender, uint256(amount0Delta));
            } else {
                if (_isPermit2(permit)) {
                    _permit2(permit);
                } else {
                    token0.safeTransferFrom(payer, msg.sender, uint256(amount0Delta));
                }
            }
        }
        if (amount1Delta > 0) {
            if (payer == address(this)) {
                token1.safeTransfer(msg.sender, uint256(amount1Delta));
            } else {
                if (_isPermit2(permit)) {
                    _permit2(permit);
                } else {
                    token1.safeTransferFrom(payer, msg.sender, uint256(amount1Delta));
                }
            }
        }
    }

    function _makeSwap(
        address recipient,
        address payer,
        uint256 pool,
        uint256 amount,
        bytes memory permit
    ) private returns (uint256, address) {
        bool zeroForOne = pool & _ONE_FOR_ZERO_MASK == 0;
        if (zeroForOne) {
            (, int256 amount1) = IUniswapV3Pool(address(uint160(pool))).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MIN_SQRT_RATIO,
                abi.encodePacked(abi.encode(payer), permit) // for bytes alignment
            );
            return (SafeCast.toUint256(-amount1), IUniswapV3Pool(address(uint160(pool))).token1());
        } else {
            (int256 amount0, ) = IUniswapV3Pool(address(uint160(pool))).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MAX_SQRT_RATIO,
                abi.encodePacked(abi.encode(payer), permit) // for bytes alignment
            );
            return (SafeCast.toUint256(-amount0), IUniswapV3Pool(address(uint160(pool))).token0());
        }
    }
}

// File: contracts/OpenOceanExchange.sol



pragma solidity ^0.8.0;










contract OpenOceanExchange is OwnableUpgradeable, PausableUpgradeable, Permitable, UniswapV2Exchange, UniswapV3Exchange {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    using UniversalERC20 for IERC20;

    uint256 private constant _PARTIAL_FILL = 0x01;
    uint256 private constant _SHOULD_CLAIM = 0x02;

    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address srcReceiver;
        address dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 guaranteedAmount;
        uint256 flags;
        address referrer;
        bytes permit;
    }

    event Swapped(
        address indexed sender,
        IERC20 indexed srcToken,
        IERC20 indexed dstToken,
        address dstReceiver,
        uint256 amount,
        uint256 spentAmount,
        uint256 returnAmount,
        uint256 minReturnAmount,
        uint256 guaranteedAmount,
        address referrer
    );

    function initialize() public initializer {
        OwnableUpgradeable.__Ownable_init();
        PausableUpgradeable.__Pausable_init();
    }

    function swap(
        IOpenOceanCaller caller,
        SwapDescription calldata desc,
        IOpenOceanCaller.CallDescription[] calldata calls
    ) external payable whenNotPaused returns (uint256 returnAmount) {
        require(desc.minReturnAmount > 0, "Min return should not be 0");
        require(calls.length > 0, "Call data should exist");

        uint256 flags = desc.flags;
        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;

        require(msg.value == (srcToken.isETH() ? desc.amount : 0), "Invalid msg.value");

        if (flags & _SHOULD_CLAIM != 0) {
            require(!srcToken.isETH(), "Claim token is ETH");
            _claim(srcToken, desc.srcReceiver, desc.amount, desc.permit);
        }

        address dstReceiver = (desc.dstReceiver == address(0)) ? msg.sender : desc.dstReceiver;
        uint256 initialSrcBalance = (flags & _PARTIAL_FILL != 0) ? srcToken.universalBalanceOf(msg.sender) : 0;
        uint256 initialDstBalance = dstToken.universalBalanceOf(dstReceiver);

        caller.makeCalls{value: msg.value}(calls);

        uint256 spentAmount = desc.amount;
        returnAmount = dstToken.universalBalanceOf(dstReceiver).sub(initialDstBalance);

        if (flags & _PARTIAL_FILL != 0) {
            spentAmount = initialSrcBalance.add(desc.amount).sub(srcToken.universalBalanceOf(msg.sender));
            require(returnAmount.mul(desc.amount) >= desc.minReturnAmount.mul(spentAmount), "Return amount is not enough");
        } else {
            require(returnAmount >= desc.minReturnAmount, "Return amount is not enough");
        }

        _emitSwapped(desc, srcToken, dstToken, dstReceiver, spentAmount, returnAmount);
    }

    function _emitSwapped(
        SwapDescription calldata desc,
        IERC20 srcToken,
        IERC20 dstToken,
        address dstReceiver,
        uint256 spentAmount,
        uint256 returnAmount
    ) private {
        emit Swapped(
            msg.sender,
            srcToken,
            dstToken,
            dstReceiver,
            desc.amount,
            spentAmount,
            returnAmount,
            desc.minReturnAmount,
            desc.guaranteedAmount,
            desc.referrer
        );
    }

    function _claim(IERC20 token, address dst, uint256 amount, bytes calldata permit) private {
        if (!_permit(address(token), permit, true)) {
            token.safeTransferFrom(msg.sender, dst, amount);
        }
    }

    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.universalTransfer(payable(msg.sender), amount);
    }

    function pause() external onlyOwner {
        _pause();
    }

    function setPermit2(address _permit2) external onlyOwner {
        permit2 = _permit2;
    }
}

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}

# @version 0.3.1
# (c) Curve.Fi, 2021
# Pool for two crypto assets

# Universal implementation which can use both ETH and ERC20s
from vyper.interfaces import ERC20


interface Factory:
    def admin() -> address: view
    def fee_receiver() -> address: view

interface CurveToken:
    def totalSupply() -> uint256: view
    def mint(_to: address, _value: uint256) -> bool: nonpayable
    def mint_relative(_to: address, frac: uint256) -> uint256: nonpayable
    def burnFrom(_to: address, _value: uint256) -> bool: nonpayable

interface WETH:
    def deposit(): payable
    def withdraw(_amount: uint256): nonpayable


# Events
event TokenExchange:
    buyer: indexed(address)
    sold_id: uint256
    tokens_sold: uint256
    bought_id: uint256
    tokens_bought: uint256

event AddLiquidity:
    provider: indexed(address)
    token_amounts: uint256[N_COINS]
    fee: uint256
    token_supply: uint256

event RemoveLiquidity:
    provider: indexed(address)
    token_amounts: uint256[N_COINS]
    token_supply: uint256

event RemoveLiquidityOne:
    provider: indexed(address)
    token_amount: uint256
    coin_index: uint256
    coin_amount: uint256

event CommitNewParameters:
    deadline: indexed(uint256)
    admin_fee: uint256
    mid_fee: uint256
    out_fee: uint256
    fee_gamma: uint256
    allowed_extra_profit: uint256
    adjustment_step: uint256
    ma_half_time: uint256

event NewParameters:
    admin_fee: uint256
    mid_fee: uint256
    out_fee: uint256
    fee_gamma: uint256
    allowed_extra_profit: uint256
    adjustment_step: uint256
    ma_half_time: uint256

event RampAgamma:
    initial_A: uint256
    future_A: uint256
    initial_gamma: uint256
    future_gamma: uint256
    initial_time: uint256
    future_time: uint256

event StopRampA:
    current_A: uint256
    current_gamma: uint256
    time: uint256

event ClaimAdminFee:
    admin: indexed(address)
    tokens: uint256


ADMIN_ACTIONS_DELAY: constant(uint256) = 3 * 86400
MIN_RAMP_TIME: constant(uint256) = 86400

MAX_ADMIN_FEE: constant(uint256) = 10 * 10 ** 9
MIN_FEE: constant(uint256) = 5 * 10 ** 5  # 0.5 bps
MAX_FEE: constant(uint256) = 10 * 10 ** 9
MAX_A_CHANGE: constant(uint256) = 10
NOISE_FEE: constant(uint256) = 10**5  # 0.1 bps

MIN_GAMMA: constant(uint256) = 10**10
MAX_GAMMA: constant(uint256) = 2 * 10**16

MIN_A: constant(uint256) = N_COINS**N_COINS * A_MULTIPLIER / 10
MAX_A: constant(uint256) = N_COINS**N_COINS * A_MULTIPLIER * 100000

EXP_PRECISION: constant(uint256) = 10**10

N_COINS: constant(int128) = 2
PRECISION: constant(uint256) = 10 ** 18  # The precision to convert to
A_MULTIPLIER: constant(uint256) = 10000


# Implementation can be changed by changing this constant
WETH20: immutable(address)


token: public(address)
coins: public(address[N_COINS])

price_scale: public(uint256)   # Internal price scale
_price_oracle: uint256  # Price target given by MA

last_prices: public(uint256)
last_prices_timestamp: public(uint256)

initial_A_gamma: public(uint256)
future_A_gamma: public(uint256)
initial_A_gamma_time: public(uint256)
future_A_gamma_time: public(uint256)

allowed_extra_profit: public(uint256)  # 2 * 10**12 - recommended value
future_allowed_extra_profit: public(uint256)

fee_gamma: public(uint256)
future_fee_gamma: public(uint256)

adjustment_step: public(uint256)
future_adjustment_step: public(uint256)

ma_half_time: public(uint256)
future_ma_half_time: public(uint256)

mid_fee: public(uint256)
out_fee: public(uint256)
admin_fee: public(uint256)
future_mid_fee: public(uint256)
future_out_fee: public(uint256)
future_admin_fee: public(uint256)

balances: public(uint256[N_COINS])
D: public(uint256)

factory: public(address)

xcp_profit: public(uint256)
xcp_profit_a: public(uint256)  # Full profit at last claim of admin fees
virtual_price: public(uint256)  # Cached (fast to read) virtual price also used internally
not_adjusted: bool

admin_actions_deadline: public(uint256)

# This must be changed for different N_COINS
# For example:
# N_COINS = 3 -> 1  (10**18 -> 10**18)
# N_COINS = 4 -> 10**8  (10**18 -> 10**10)
# PRICE_PRECISION_MUL: constant(uint256) = 1
PRECISIONS: uint256  # packed


@external
def __init__(_weth: address):
    WETH20 = _weth
    self.mid_fee = 22022022


@payable
@external
def __default__():
    pass


# Internal Functions

@internal
@view
def _get_precisions() -> uint256[2]:
    p0: uint256 = self.PRECISIONS
    p1: uint256 = 10 ** shift(p0, -8)
    p0 = 10 ** bitwise_and(p0, 255)
    return [p0, p1]


@internal
@view
def xp() -> uint256[N_COINS]:
    precisions: uint256[2] = self._get_precisions()
    return [self.balances[0] * precisions[0],
            self.balances[1] * precisions[1] * self.price_scale / PRECISION]


@view
@internal
def _A_gamma() -> uint256[2]:
    t1: uint256 = self.future_A_gamma_time

    A_gamma_1: uint256 = self.future_A_gamma
    gamma1: uint256 = bitwise_and(A_gamma_1, 2**128-1)
    A1: uint256 = shift(A_gamma_1, -128)

    if block.timestamp < t1:
        # handle ramping up and down of A
        A_gamma_0: uint256 = self.initial_A_gamma
        t0: uint256 = self.initial_A_gamma_time

        # Less readable but more compact way of writing and converting to uint256
        # gamma0: uint256 = bitwise_and(A_gamma_0, 2**128-1)
        # A0: uint256 = shift(A_gamma_0, -128)
        # A1 = A0 + (A1 - A0) * (block.timestamp - t0) / (t1 - t0)
        # gamma1 = gamma0 + (gamma1 - gamma0) * (block.timestamp - t0) / (t1 - t0)

        t1 -= t0
        t0 = block.timestamp - t0
        t2: uint256 = t1 - t0

        A1 = (shift(A_gamma_0, -128) * t2 + A1 * t0) / t1
        gamma1 = (bitwise_and(A_gamma_0, 2**128-1) * t2 + gamma1 * t0) / t1

    return [A1, gamma1]


@internal
@view
def _fee(xp: uint256[N_COINS]) -> uint256:
    """
    f = fee_gamma / (fee_gamma + (1 - K))
    where
    K = prod(x) / (sum(x) / N)**N
    (all normalized to 1e18)
    """
    fee_gamma: uint256 = self.fee_gamma
    f: uint256 = xp[0] + xp[1]  # sum
    f = fee_gamma * 10**18 / (
        fee_gamma + 10**18 - (10**18 * N_COINS**N_COINS) * xp[0] / f * xp[1] / f
    )
    return (self.mid_fee * f + self.out_fee * (10**18 - f)) / 10**18


### Math functions
@internal
@pure
def geometric_mean(unsorted_x: uint256[N_COINS], sort: bool) -> uint256:
    """
    (x[0] * x[1] * ...) ** (1/N)
    """
    x: uint256[N_COINS] = unsorted_x
    if sort and x[0] < x[1]:
        x = [unsorted_x[1], unsorted_x[0]]
    D: uint256 = x[0]
    diff: uint256 = 0
    for i in range(255):
        D_prev: uint256 = D
        # tmp: uint256 = 10**18
        # for _x in x:
        #     tmp = tmp * _x / D
        # D = D * ((N_COINS - 1) * 10**18 + tmp) / (N_COINS * 10**18)
        # line below makes it for 2 coins
        D = (D + x[0] * x[1] / D) / N_COINS
        if D > D_prev:
            diff = D - D_prev
        else:
            diff = D_prev - D
        if diff <= 1 or diff * 10**18 < D:
            return D
    raise "Did not converge"


@internal
@view
def newton_D(ANN: uint256, gamma: uint256, x_unsorted: uint256[N_COINS]) -> uint256:
    """
    Finding the invariant using Newton method.
    ANN is higher by the factor A_MULTIPLIER
    ANN is already A * N**N

    Currently uses 60k gas
    """
    # Safety checks
    assert ANN > MIN_A - 1 and ANN < MAX_A + 1  # dev: unsafe values A
    assert gamma > MIN_GAMMA - 1 and gamma < MAX_GAMMA + 1  # dev: unsafe values gamma

    # Initial value of invariant D is that for constant-product invariant
    x: uint256[N_COINS] = x_unsorted
    if x[0] < x[1]:
        x = [x_unsorted[1], x_unsorted[0]]

    assert x[0] > 10**9 - 1 and x[0] < 10**15 * 10**18 + 1  # dev: unsafe values x[0]
    assert x[1] * 10**18 / x[0] > 10**14-1  # dev: unsafe values x[i] (input)

    D: uint256 = N_COINS * self.geometric_mean(x, False)
    S: uint256 = x[0] + x[1]

    for i in range(255):
        D_prev: uint256 = D

        # K0: uint256 = 10**18
        # for _x in x:
        #     K0 = K0 * _x * N_COINS / D
        # collapsed for 2 coins
        K0: uint256 = (10**18 * N_COINS**2) * x[0] / D * x[1] / D

        _g1k0: uint256 = gamma + 10**18
        if _g1k0 > K0:
            _g1k0 = _g1k0 - K0 + 1
        else:
            _g1k0 = K0 - _g1k0 + 1

        # D / (A * N**N) * _g1k0**2 / gamma**2
        mul1: uint256 = 10**18 * D / gamma * _g1k0 / gamma * _g1k0 * A_MULTIPLIER / ANN

        # 2*N*K0 / _g1k0
        mul2: uint256 = (2 * 10**18) * N_COINS * K0 / _g1k0

        neg_fprime: uint256 = (S + S * mul2 / 10**18) + mul1 * N_COINS / K0 - mul2 * D / 10**18

        # D -= f / fprime
        D_plus: uint256 = D * (neg_fprime + S) / neg_fprime
        D_minus: uint256 = D*D / neg_fprime
        if 10**18 > K0:
            D_minus += D * (mul1 / neg_fprime) / 10**18 * (10**18 - K0) / K0
        else:
            D_minus -= D * (mul1 / neg_fprime) / 10**18 * (K0 - 10**18) / K0

        if D_plus > D_minus:
            D = D_plus - D_minus
        else:
            D = (D_minus - D_plus) / 2

        diff: uint256 = 0
        if D > D_prev:
            diff = D - D_prev
        else:
            diff = D_prev - D
        if diff * 10**14 < max(10**16, D):  # Could reduce precision for gas efficiency here
            # Test that we are safe with the next newton_y
            for _x in x:
                frac: uint256 = _x * 10**18 / D
                assert (frac > 10**16 - 1) and (frac < 10**20 + 1)  # dev: unsafe values x[i]
            return D

    raise "Did not converge"


@internal
@pure
def newton_y(ANN: uint256, gamma: uint256, x: uint256[N_COINS], D: uint256, i: uint256) -> uint256:
    """
    Calculating x[i] given other balances x[0..N_COINS-1] and invariant D
    ANN = A * N**N
    """
    # Safety checks
    assert ANN > MIN_A - 1 and ANN < MAX_A + 1  # dev: unsafe values A
    assert gamma > MIN_GAMMA - 1 and gamma < MAX_GAMMA + 1  # dev: unsafe values gamma
    assert D > 10**17 - 1 and D < 10**15 * 10**18 + 1 # dev: unsafe values D

    x_j: uint256 = x[1 - i]
    y: uint256 = D**2 / (x_j * N_COINS**2)
    K0_i: uint256 = (10**18 * N_COINS) * x_j / D
    # S_i = x_j

    # frac = x_j * 1e18 / D => frac = K0_i / N_COINS
    assert (K0_i > 10**16*N_COINS - 1) and (K0_i < 10**20*N_COINS + 1)  # dev: unsafe values x[i]

    # x_sorted: uint256[N_COINS] = x
    # x_sorted[i] = 0
    # x_sorted = self.sort(x_sorted)  # From high to low
    # x[not i] instead of x_sorted since x_soted has only 1 element

    convergence_limit: uint256 = max(max(x_j / 10**14, D / 10**14), 100)

    for j in range(255):
        y_prev: uint256 = y

        K0: uint256 = K0_i * y * N_COINS / D
        S: uint256 = x_j + y

        _g1k0: uint256 = gamma + 10**18
        if _g1k0 > K0:
            _g1k0 = _g1k0 - K0 + 1
        else:
            _g1k0 = K0 - _g1k0 + 1

        # D / (A * N**N) * _g1k0**2 / gamma**2
        mul1: uint256 = 10**18 * D / gamma * _g1k0 / gamma * _g1k0 * A_MULTIPLIER / ANN

        # 2*K0 / _g1k0
        mul2: uint256 = 10**18 + (2 * 10**18) * K0 / _g1k0

        yfprime: uint256 = 10**18 * y + S * mul2 + mul1
        _dyfprime: uint256 = D * mul2
        if yfprime < _dyfprime:
            y = y_prev / 2
            continue
        else:
            yfprime -= _dyfprime
        fprime: uint256 = yfprime / y

        # y -= f / f_prime;  y = (y * fprime - f) / fprime
        # y = (yfprime + 10**18 * D - 10**18 * S) // fprime + mul1 // fprime * (10**18 - K0) // K0
        y_minus: uint256 = mul1 / fprime
        y_plus: uint256 = (yfprime + 10**18 * D) / fprime + y_minus * 10**18 / K0
        y_minus += 10**18 * S / fprime

        if y_plus < y_minus:
            y = y_prev / 2
        else:
            y = y_plus - y_minus

        diff: uint256 = 0
        if y > y_prev:
            diff = y - y_prev
        else:
            diff = y_prev - y
        if diff < max(convergence_limit, y / 10**14):
            frac: uint256 = y * 10**18 / D
            assert (frac > 10**16 - 1) and (frac < 10**20 + 1)  # dev: unsafe value for y
            return y

    raise "Did not converge"


@internal
@pure
def halfpow(power: uint256) -> uint256:
    """
    1e18 * 0.5 ** (power/1e18)

    Inspired by: https://github.com/balancer-labs/balancer-core/blob/master/contracts/BNum.sol#L128
    """
    intpow: uint256 = power / 10**18
    otherpow: uint256 = power - intpow * 10**18
    if intpow > 59:
        return 0
    result: uint256 = 10**18 / (2**intpow)
    if otherpow == 0:
        return result

    term: uint256 = 10**18
    x: uint256 = 5 * 10**17
    S: uint256 = 10**18
    neg: bool = False

    for i in range(1, 256):
        K: uint256 = i * 10**18
        c: uint256 = K - 10**18
        if otherpow > c:
            c = otherpow - c
            neg = not neg
        else:
            c -= otherpow
        term = term * (c * x / 10**18) / K
        if neg:
            S -= term
        else:
            S += term
        if term < EXP_PRECISION:
            return result * S / 10**18

    raise "Did not converge"
### end of Math functions


@internal
@view
def get_xcp(D: uint256) -> uint256:
    x: uint256[N_COINS] = [D / N_COINS, D * PRECISION / (self.price_scale * N_COINS)]
    return self.geometric_mean(x, True)


@internal
def _claim_admin_fees():
    A_gamma: uint256[2] = self._A_gamma()

    xcp_profit: uint256 = self.xcp_profit
    xcp_profit_a: uint256 = self.xcp_profit_a

    # Gulp here
    for i in range(N_COINS):
        coin: address = self.coins[i]
        if coin == WETH20:
            self.balances[i] = self.balance
        else:
            self.balances[i] = ERC20(coin).balanceOf(self)

    vprice: uint256 = self.virtual_price

    if xcp_profit > xcp_profit_a:
        fees: uint256 = (xcp_profit - xcp_profit_a) * self.admin_fee / (2 * 10**10)
        if fees > 0:
            receiver: address = Factory(self.factory).fee_receiver()
            if receiver != ZERO_ADDRESS:
                frac: uint256 = vprice * 10**18 / (vprice - fees) - 10**18
                claimed: uint256 = CurveToken(self.token).mint_relative(receiver, frac)
                xcp_profit -= fees*2
                self.xcp_profit = xcp_profit
                log ClaimAdminFee(receiver, claimed)

    total_supply: uint256 = CurveToken(self.token).totalSupply()

    # Recalculate D b/c we gulped
    D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], self.xp())
    self.D = D

    self.virtual_price = 10**18 * self.get_xcp(D) / total_supply

    if xcp_profit > xcp_profit_a:
        self.xcp_profit_a = xcp_profit


@internal
@view
def internal_price_oracle() -> uint256:
    price_oracle: uint256 = self._price_oracle
    last_prices_timestamp: uint256 = self.last_prices_timestamp

    if last_prices_timestamp < block.timestamp:
        ma_half_time: uint256 = self.ma_half_time
        last_prices: uint256 = self.last_prices
        alpha: uint256 = self.halfpow((block.timestamp - last_prices_timestamp) * 10**18 / ma_half_time)
        return (last_prices * (10**18 - alpha) + price_oracle * alpha) / 10**18

    else:
        return price_oracle


@internal
def tweak_price(A_gamma: uint256[2],_xp: uint256[N_COINS], p_i: uint256, new_D: uint256):
    price_oracle: uint256 = self._price_oracle
    last_prices: uint256 = self.last_prices
    price_scale: uint256 = self.price_scale
    last_prices_timestamp: uint256 = self.last_prices_timestamp
    p_new: uint256 = 0

    if last_prices_timestamp < block.timestamp:
        # MA update required
        ma_half_time: uint256 = self.ma_half_time
        alpha: uint256 = self.halfpow((block.timestamp - last_prices_timestamp) * 10**18 / ma_half_time)
        price_oracle = (last_prices * (10**18 - alpha) + price_oracle * alpha) / 10**18
        self._price_oracle = price_oracle
        self.last_prices_timestamp = block.timestamp

    D_unadjusted: uint256 = new_D  # Withdrawal methods know new D already
    if new_D == 0:
        # We will need this a few times (35k gas)
        D_unadjusted = self.newton_D(A_gamma[0], A_gamma[1], _xp)

    if p_i > 0:
        last_prices = p_i

    else:
        # calculate real prices
        __xp: uint256[N_COINS] = _xp
        dx_price: uint256 = __xp[0] / 10**6
        __xp[0] += dx_price
        last_prices = price_scale * dx_price / (_xp[1] - self.newton_y(A_gamma[0], A_gamma[1], __xp, D_unadjusted, 1))

    self.last_prices = last_prices

    total_supply: uint256 = CurveToken(self.token).totalSupply()
    old_xcp_profit: uint256 = self.xcp_profit
    old_virtual_price: uint256 = self.virtual_price

    # Update profit numbers without price adjustment first
    xp: uint256[N_COINS] = [D_unadjusted / N_COINS, D_unadjusted * PRECISION / (N_COINS * price_scale)]
    xcp_profit: uint256 = 10**18
    virtual_price: uint256 = 10**18

    if old_virtual_price > 0:
        xcp: uint256 = self.geometric_mean(xp, True)
        virtual_price = 10**18 * xcp / total_supply
        xcp_profit = old_xcp_profit * virtual_price / old_virtual_price

        t: uint256 = self.future_A_gamma_time
        if virtual_price < old_virtual_price and t == 0:
            raise "Loss"
        if t == 1:
            self.future_A_gamma_time = 0

    self.xcp_profit = xcp_profit

    norm: uint256 = price_oracle * 10**18 / price_scale
    if norm > 10**18:
        norm -= 10**18
    else:
        norm = 10**18 - norm
    adjustment_step: uint256 = max(self.adjustment_step, norm / 5)

    needs_adjustment: bool = self.not_adjusted
    # if not needs_adjustment and (virtual_price-10**18 > (xcp_profit-10**18)/2 + self.allowed_extra_profit):
    # (re-arrange for gas efficiency)
    if not needs_adjustment and (virtual_price * 2 - 10**18 > xcp_profit + 2*self.allowed_extra_profit) and (norm > adjustment_step) and (old_virtual_price > 0):
        needs_adjustment = True
        self.not_adjusted = True

    if needs_adjustment:
        if norm > adjustment_step and old_virtual_price > 0:
            p_new = (price_scale * (norm - adjustment_step) + adjustment_step * price_oracle) / norm

            # Calculate balances*prices
            xp = [_xp[0], _xp[1] * p_new / price_scale]

            # Calculate "extended constant product" invariant xCP and virtual price
            D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], xp)
            xp = [D / N_COINS, D * PRECISION / (N_COINS * p_new)]
            # We reuse old_virtual_price here but it's not old anymore
            old_virtual_price = 10**18 * self.geometric_mean(xp, True) / total_supply

            # Proceed if we've got enough profit
            # if (old_virtual_price > 10**18) and (2 * (old_virtual_price - 10**18) > xcp_profit - 10**18):
            if (old_virtual_price > 10**18) and (2 * old_virtual_price - 10**18 > xcp_profit):
                self.price_scale = p_new
                self.D = D
                self.virtual_price = old_virtual_price

                return

            else:
                self.not_adjusted = False

                # Can instead do another flag variable if we want to save bytespace
                self.D = D_unadjusted
                self.virtual_price = virtual_price
                self._claim_admin_fees()

                return

    # If we are here, the price_scale adjustment did not happen
    # Still need to update the profit counter and D
    self.D = D_unadjusted
    self.virtual_price = virtual_price

    # norm appeared < adjustment_step after
    if needs_adjustment:
        self.not_adjusted = False
        self._claim_admin_fees()


@internal
def _exchange(sender: address, mvalue: uint256, i: uint256, j: uint256, dx: uint256, min_dy: uint256,
              use_eth: bool, receiver: address, callbacker: address, callback_sig: bytes32) -> uint256:
    assert i != j  # dev: coin index out of range
    assert i < N_COINS  # dev: coin index out of range
    assert j < N_COINS  # dev: coin index out of range
    assert dx > 0  # dev: do not exchange 0 coins

    A_gamma: uint256[2] = self._A_gamma()
    xp: uint256[N_COINS] = self.balances
    p: uint256 = 0
    dy: uint256 = 0

    in_coin: address = self.coins[i]
    out_coin: address = self.coins[j]

    y: uint256 = xp[j]
    x0: uint256 = xp[i]
    xp[i] = x0 + dx
    self.balances[i] = xp[i]

    price_scale: uint256 = self.price_scale
    precisions: uint256[2] = self._get_precisions()

    xp = [xp[0] * precisions[0], xp[1] * price_scale * precisions[1] / PRECISION]

    prec_i: uint256 = precisions[0]
    prec_j: uint256 = precisions[1]
    if i == 1:
        prec_i = precisions[1]
        prec_j = precisions[0]

    # In case ramp is happening
    t: uint256 = self.future_A_gamma_time
    if t > 0:
        x0 *= prec_i
        if i > 0:
            x0 = x0 * price_scale / PRECISION
        x1: uint256 = xp[i]  # Back up old value in xp
        xp[i] = x0
        self.D = self.newton_D(A_gamma[0], A_gamma[1], xp)
        xp[i] = x1  # And restore
        if block.timestamp >= t:
            self.future_A_gamma_time = 1

    dy = xp[j] - self.newton_y(A_gamma[0], A_gamma[1], xp, self.D, j)
    # Not defining new "y" here to have less variables / make subsequent calls cheaper
    xp[j] -= dy
    dy -= 1

    if j > 0:
        dy = dy * PRECISION / price_scale
    dy /= prec_j

    dy -= self._fee(xp) * dy / 10**10
    assert dy >= min_dy, "Slippage"
    y -= dy

    self.balances[j] = y

    # Do transfers in and out together
    # XXX coin vs ETH
    if use_eth and in_coin == WETH20:
        assert mvalue == dx  # dev: incorrect eth amount
    else:
        assert mvalue == 0  # dev: nonzero eth amount
        if callback_sig == EMPTY_BYTES32:
            response: Bytes[32] = raw_call(
                in_coin,
                _abi_encode(
                    sender, self, dx, method_id=method_id("transferFrom(address,address,uint256)")
                ),
                max_outsize=32,
            )
            if len(response) != 0:
                assert convert(response, bool)  # dev: failed transfer
        else:
            b: uint256 = ERC20(in_coin).balanceOf(self)
            raw_call(
                callbacker,
                concat(slice(callback_sig, 0, 4), _abi_encode(sender, receiver, in_coin, dx, dy))
            )
            assert ERC20(in_coin).balanceOf(self) - b == dx  # dev: callback didn't give us coins
        if in_coin == WETH20:
            WETH(WETH20).withdraw(dx)

    if use_eth and out_coin == WETH20:
        raw_call(receiver, b"", value=dy)
    else:
        if out_coin == WETH20:
            WETH(WETH20).deposit(value=dy)
        response: Bytes[32] = raw_call(
            out_coin,
            _abi_encode(receiver, dy, method_id=method_id("transfer(address,uint256)")),
            max_outsize=32,
        )
        if len(response) != 0:
            assert convert(response, bool)

    y *= prec_j
    if j > 0:
        y = y * price_scale / PRECISION
    xp[j] = y

    # Calculate price
    if dx > 10**5 and dy > 10**5:
        _dx: uint256 = dx * prec_i
        _dy: uint256 = dy * prec_j
        if i == 0:
            p = _dx * 10**18 / _dy
        else:  # j == 0
            p = _dy * 10**18 / _dx

    self.tweak_price(A_gamma, xp, p, 0)

    log TokenExchange(sender, i, dx, j, dy)

    return dy


@view
@internal
def _calc_token_fee(amounts: uint256[N_COINS], xp: uint256[N_COINS]) -> uint256:
    # fee = sum(amounts_i - avg(amounts)) * fee' / sum(amounts)
    fee: uint256 = self._fee(xp) * N_COINS / (4 * (N_COINS-1))
    S: uint256 = 0
    for _x in amounts:
        S += _x
    avg: uint256 = S / N_COINS
    Sdiff: uint256 = 0
    for _x in amounts:
        if _x > avg:
            Sdiff += _x - avg
        else:
            Sdiff += avg - _x
    return fee * Sdiff / S + NOISE_FEE


@internal
@view
def _calc_withdraw_one_coin(A_gamma: uint256[2], token_amount: uint256, i: uint256, update_D: bool,
                            calc_price: bool) -> (uint256, uint256, uint256, uint256[N_COINS]):
    token_supply: uint256 = CurveToken(self.token).totalSupply()
    assert token_amount <= token_supply  # dev: token amount more than supply
    assert i < N_COINS  # dev: coin out of range

    xx: uint256[N_COINS] = self.balances
    D0: uint256 = 0
    precisions: uint256[2] = self._get_precisions()

    price_scale_i: uint256 = self.price_scale * precisions[1]
    xp: uint256[N_COINS] = [xx[0] * precisions[0], xx[1] * price_scale_i / PRECISION]
    if i == 0:
        price_scale_i = PRECISION * precisions[0]

    if update_D:
        D0 = self.newton_D(A_gamma[0], A_gamma[1], xp)
    else:
        D0 = self.D

    D: uint256 = D0

    # Charge the fee on D, not on y, e.g. reducing invariant LESS than charging the user
    fee: uint256 = self._fee(xp)
    dD: uint256 = token_amount * D / token_supply
    D -= (dD - (fee * dD / (2 * 10**10) + 1))
    y: uint256 = self.newton_y(A_gamma[0], A_gamma[1], xp, D, i)
    dy: uint256 = (xp[i] - y) * PRECISION / price_scale_i
    xp[i] = y

    # Price calc
    p: uint256 = 0
    if calc_price and dy > 10**5 and token_amount > 10**5:
        # p_i = dD / D0 * sum'(p_k * x_k) / (dy - dD / D0 * y0)
        S: uint256 = 0
        precision: uint256 = precisions[0]
        if i == 1:
            S = xx[0] * precisions[0]
            precision = precisions[1]
        else:
            S = xx[1] * precisions[1]
        S = S * dD / D0
        p = S * PRECISION / (dy * precision - dD * xx[i] * precision / D0)
        if i == 0:
            p = (10**18)**2 / p

    return dy, p, D, xp


@internal
@pure
def sqrt_int(x: uint256) -> uint256:
    """
    Originating from: https://github.com/vyperlang/vyper/issues/1266
    """

    if x == 0:
        return 0

    z: uint256 = (x + 10**18) / 2
    y: uint256 = x

    for i in range(256):
        if z == y:
            return y
        y = z
        z = (x * 10**18 / z + z) / 2

    raise "Did not converge"


# External Functions


@payable
@external
@nonreentrant('lock')
def exchange(i: uint256, j: uint256, dx: uint256, min_dy: uint256,
             use_eth: bool = False, receiver: address = msg.sender) -> uint256:
    """
    Exchange using WETH by default
    """
    return self._exchange(msg.sender, msg.value, i, j, dx, min_dy, use_eth, receiver, ZERO_ADDRESS, EMPTY_BYTES32)


@payable
@external
@nonreentrant('lock')
def exchange_underlying(i: uint256, j: uint256, dx: uint256, min_dy: uint256,
                        receiver: address = msg.sender) -> uint256:
    """
    Exchange using ETH
    """
    return self._exchange(msg.sender, msg.value, i, j, dx, min_dy, True, receiver, ZERO_ADDRESS, EMPTY_BYTES32)


@payable
@external
@nonreentrant('lock')
def exchange_extended(i: uint256, j: uint256, dx: uint256, min_dy: uint256,
                      use_eth: bool, sender: address, receiver: address, cb: bytes32) -> uint256:
    assert cb != EMPTY_BYTES32  # dev: No callback specified
    return self._exchange(sender, msg.value, i, j, dx, min_dy, use_eth, receiver, msg.sender, cb)


@payable
@external
@nonreentrant('lock')
def add_liquidity(amounts: uint256[N_COINS], min_mint_amount: uint256,
                  use_eth: bool = False, receiver: address = msg.sender) -> uint256:
    assert amounts[0] > 0 or amounts[1] > 0  # dev: no coins to add

    A_gamma: uint256[2] = self._A_gamma()

    xp: uint256[N_COINS] = self.balances
    amountsp: uint256[N_COINS] = empty(uint256[N_COINS])
    xx: uint256[N_COINS] = empty(uint256[N_COINS])
    d_token: uint256 = 0
    d_token_fee: uint256 = 0
    old_D: uint256 = 0

    xp_old: uint256[N_COINS] = xp

    for i in range(N_COINS):
        bal: uint256 = xp[i] + amounts[i]
        xp[i] = bal
        self.balances[i] = bal
    xx = xp

    precisions: uint256[2] = self._get_precisions()

    price_scale: uint256 = self.price_scale * precisions[1]
    xp = [xp[0] * precisions[0], xp[1] * price_scale / PRECISION]
    xp_old = [xp_old[0] * precisions[0], xp_old[1] * price_scale / PRECISION]

    if not use_eth:
        assert msg.value == 0  # dev: nonzero eth amount

    for i in range(N_COINS):
        coin: address = self.coins[i]
        if use_eth and coin == WETH20:
            assert msg.value == amounts[i]  # dev: incorrect eth amount
        if amounts[i] > 0:
            if (not use_eth) or (coin != WETH20):
                response: Bytes[32] = raw_call(
                    coin,
                    _abi_encode(
                        msg.sender,
                        self,
                        amounts[i],
                        method_id=method_id("transferFrom(address,address,uint256)"),
                    ),
                    max_outsize=32,
                )
                if len(response) != 0:
                    assert convert(response, bool)  # dev: failed transfer
                if coin == WETH20:
                    WETH(WETH20).withdraw(amounts[i])
            amountsp[i] = xp[i] - xp_old[i]

    t: uint256 = self.future_A_gamma_time
    if t > 0:
        old_D = self.newton_D(A_gamma[0], A_gamma[1], xp_old)
        if block.timestamp >= t:
            self.future_A_gamma_time = 1
    else:
        old_D = self.D

    D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], xp)

    lp_token: address = self.token
    token_supply: uint256 = CurveToken(lp_token).totalSupply()
    if old_D > 0:
        d_token = token_supply * D / old_D - token_supply
    else:
        d_token = self.get_xcp(D)  # making initial virtual price equal to 1
    assert d_token > 0  # dev: nothing minted

    if old_D > 0:
        d_token_fee = self._calc_token_fee(amountsp, xp) * d_token / 10**10 + 1
        d_token -= d_token_fee
        token_supply += d_token
        CurveToken(lp_token).mint(receiver, d_token)

        # Calculate price
        # p_i * (dx_i - dtoken / token_supply * xx_i) = sum{k!=i}(p_k * (dtoken / token_supply * xx_k - dx_k))
        # Simplified for 2 coins
        p: uint256 = 0
        if d_token > 10**5:
            if amounts[0] == 0 or amounts[1] == 0:
                S: uint256 = 0
                precision: uint256 = 0
                ix: uint256 = 0
                if amounts[0] == 0:
                    S = xx[0] * precisions[0]
                    precision = precisions[1]
                    ix = 1
                else:
                    S = xx[1] * precisions[1]
                    precision = precisions[0]
                S = S * d_token / token_supply
                p = S * PRECISION / (amounts[ix] * precision - d_token * xx[ix] * precision / token_supply)
                if ix == 0:
                    p = (10**18)**2 / p

        self.tweak_price(A_gamma, xp, p, D)

    else:
        self.D = D
        self.virtual_price = 10**18
        self.xcp_profit = 10**18
        CurveToken(lp_token).mint(receiver, d_token)

    assert d_token >= min_mint_amount, "Slippage"

    log AddLiquidity(receiver, amounts, d_token_fee, token_supply)

    return d_token


@external
@nonreentrant('lock')
def remove_liquidity(_amount: uint256, min_amounts: uint256[N_COINS],
                     use_eth: bool = False, receiver: address = msg.sender):
    """
    This withdrawal method is very safe, does no complex math
    """
    lp_token: address = self.token
    total_supply: uint256 = CurveToken(lp_token).totalSupply()
    CurveToken(lp_token).burnFrom(msg.sender, _amount)
    balances: uint256[N_COINS] = self.balances
    amount: uint256 = _amount - 1  # Make rounding errors favoring other LPs a tiny bit

    for i in range(N_COINS):
        d_balance: uint256 = balances[i] * amount / total_supply
        assert d_balance >= min_amounts[i]
        self.balances[i] = balances[i] - d_balance
        balances[i] = d_balance  # now it's the amounts going out
        coin: address = self.coins[i]
        if use_eth and coin == WETH20:
            raw_call(receiver, b"", value=d_balance)
        else:
            if coin == WETH20:
                WETH(WETH20).deposit(value=d_balance)
            response: Bytes[32] = raw_call(
                coin,
                _abi_encode(receiver, d_balance, method_id=method_id("transfer(address,uint256)")),
                max_outsize=32,
            )
            if len(response) != 0:
                assert convert(response, bool)

    D: uint256 = self.D
    self.D = D - D * amount / total_supply

    log RemoveLiquidity(msg.sender, balances, total_supply - _amount)


@external
@nonreentrant('lock')
def remove_liquidity_one_coin(token_amount: uint256, i: uint256, min_amount: uint256,
                              use_eth: bool = False, receiver: address = msg.sender) -> uint256:
    A_gamma: uint256[2] = self._A_gamma()

    dy: uint256 = 0
    D: uint256 = 0
    p: uint256 = 0
    xp: uint256[N_COINS] = empty(uint256[N_COINS])
    future_A_gamma_time: uint256 = self.future_A_gamma_time
    dy, p, D, xp = self._calc_withdraw_one_coin(A_gamma, token_amount, i, (future_A_gamma_time > 0), True)
    assert dy >= min_amount, "Slippage"

    if block.timestamp >= future_A_gamma_time:
        self.future_A_gamma_time = 1

    self.balances[i] -= dy
    CurveToken(self.token).burnFrom(msg.sender, token_amount)

    coin: address = self.coins[i]
    if use_eth and coin == WETH20:
        raw_call(receiver, b"", value=dy)
    else:
        if coin == WETH20:
            WETH(WETH20).deposit(value=dy)
        response: Bytes[32] = raw_call(
            coin,
            _abi_encode(receiver, dy, method_id=method_id("transfer(address,uint256)")),
            max_outsize=32,
        )
        if len(response) != 0:
            assert convert(response, bool)

    self.tweak_price(A_gamma, xp, p, D)

    log RemoveLiquidityOne(msg.sender, token_amount, i, dy)

    return dy


@external
@nonreentrant('lock')
def claim_admin_fees():
    self._claim_admin_fees()


# Admin parameters
@external
def ramp_A_gamma(future_A: uint256, future_gamma: uint256, future_time: uint256):
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner
    assert block.timestamp > self.initial_A_gamma_time + (MIN_RAMP_TIME-1)
    assert future_time > block.timestamp + (MIN_RAMP_TIME-1)  # dev: insufficient time

    A_gamma: uint256[2] = self._A_gamma()
    initial_A_gamma: uint256 = shift(A_gamma[0], 128)
    initial_A_gamma = bitwise_or(initial_A_gamma, A_gamma[1])

    assert future_A > MIN_A-1
    assert future_A < MAX_A+1
    assert future_gamma > MIN_GAMMA-1
    assert future_gamma < MAX_GAMMA+1

    ratio: uint256 = 10**18 * future_A / A_gamma[0]
    assert ratio < 10**18 * MAX_A_CHANGE + 1
    assert ratio > 10**18 / MAX_A_CHANGE - 1

    ratio = 10**18 * future_gamma / A_gamma[1]
    assert ratio < 10**18 * MAX_A_CHANGE + 1
    assert ratio > 10**18 / MAX_A_CHANGE - 1

    self.initial_A_gamma = initial_A_gamma
    self.initial_A_gamma_time = block.timestamp

    future_A_gamma: uint256 = shift(future_A, 128)
    future_A_gamma = bitwise_or(future_A_gamma, future_gamma)
    self.future_A_gamma_time = future_time
    self.future_A_gamma = future_A_gamma

    log RampAgamma(A_gamma[0], future_A, A_gamma[1], future_gamma, block.timestamp, future_time)


@external
def stop_ramp_A_gamma():
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner

    A_gamma: uint256[2] = self._A_gamma()
    current_A_gamma: uint256 = shift(A_gamma[0], 128)
    current_A_gamma = bitwise_or(current_A_gamma, A_gamma[1])
    self.initial_A_gamma = current_A_gamma
    self.future_A_gamma = current_A_gamma
    self.initial_A_gamma_time = block.timestamp
    self.future_A_gamma_time = block.timestamp
    # now (block.timestamp < t1) is always False, so we return saved A

    log StopRampA(A_gamma[0], A_gamma[1], block.timestamp)


@external
def commit_new_parameters(
    _new_mid_fee: uint256,
    _new_out_fee: uint256,
    _new_admin_fee: uint256,
    _new_fee_gamma: uint256,
    _new_allowed_extra_profit: uint256,
    _new_adjustment_step: uint256,
    _new_ma_half_time: uint256,
    ):
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner
    assert self.admin_actions_deadline == 0  # dev: active action

    new_mid_fee: uint256 = _new_mid_fee
    new_out_fee: uint256 = _new_out_fee
    new_admin_fee: uint256 = _new_admin_fee
    new_fee_gamma: uint256 = _new_fee_gamma
    new_allowed_extra_profit: uint256 = _new_allowed_extra_profit
    new_adjustment_step: uint256 = _new_adjustment_step
    new_ma_half_time: uint256 = _new_ma_half_time

    # Fees
    if new_out_fee < MAX_FEE+1:
        assert new_out_fee > MIN_FEE-1  # dev: fee is out of range
    else:
        new_out_fee = self.out_fee
    if new_mid_fee > MAX_FEE:
        new_mid_fee = self.mid_fee
    assert new_mid_fee <= new_out_fee  # dev: mid-fee is too high
    if new_admin_fee > MAX_ADMIN_FEE:
        new_admin_fee = self.admin_fee

    # AMM parameters
    if new_fee_gamma < 10**18:
        assert new_fee_gamma > 0  # dev: fee_gamma out of range [1 .. 10**18]
    else:
        new_fee_gamma = self.fee_gamma
    if new_allowed_extra_profit > 10**18:
        new_allowed_extra_profit = self.allowed_extra_profit
    if new_adjustment_step > 10**18:
        new_adjustment_step = self.adjustment_step

    # MA
    if new_ma_half_time < 7*86400:
        assert new_ma_half_time > 0  # dev: MA time should be longer than 1 second
    else:
        new_ma_half_time = self.ma_half_time

    _deadline: uint256 = block.timestamp + ADMIN_ACTIONS_DELAY
    self.admin_actions_deadline = _deadline

    self.future_admin_fee = new_admin_fee
    self.future_mid_fee = new_mid_fee
    self.future_out_fee = new_out_fee
    self.future_fee_gamma = new_fee_gamma
    self.future_allowed_extra_profit = new_allowed_extra_profit
    self.future_adjustment_step = new_adjustment_step
    self.future_ma_half_time = new_ma_half_time

    log CommitNewParameters(_deadline, new_admin_fee, new_mid_fee, new_out_fee,
                            new_fee_gamma,
                            new_allowed_extra_profit, new_adjustment_step,
                            new_ma_half_time)


@external
@nonreentrant('lock')
def apply_new_parameters():
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner
    assert block.timestamp >= self.admin_actions_deadline  # dev: insufficient time
    assert self.admin_actions_deadline != 0  # dev: no active action

    self.admin_actions_deadline = 0

    admin_fee: uint256 = self.future_admin_fee
    if self.admin_fee != admin_fee:
        self._claim_admin_fees()
        self.admin_fee = admin_fee

    mid_fee: uint256 = self.future_mid_fee
    self.mid_fee = mid_fee
    out_fee: uint256 = self.future_out_fee
    self.out_fee = out_fee
    fee_gamma: uint256 = self.future_fee_gamma
    self.fee_gamma = fee_gamma
    allowed_extra_profit: uint256 = self.future_allowed_extra_profit
    self.allowed_extra_profit = allowed_extra_profit
    adjustment_step: uint256 = self.future_adjustment_step
    self.adjustment_step = adjustment_step
    ma_half_time: uint256 = self.future_ma_half_time
    self.ma_half_time = ma_half_time

    log NewParameters(admin_fee, mid_fee, out_fee,
                      fee_gamma,
                      allowed_extra_profit, adjustment_step,
                      ma_half_time)


@external
def revert_new_parameters():
    assert msg.sender == Factory(self.factory).admin()  # dev: only owner

    self.admin_actions_deadline = 0


# View Methods


@external
@view
def get_dy(i: uint256, j: uint256, dx: uint256) -> uint256:
    assert i != j  # dev: same input and output coin
    assert i < N_COINS  # dev: coin index out of range
    assert j < N_COINS  # dev: coin index out of range

    precisions: uint256[2] = self._get_precisions()

    price_scale: uint256 = self.price_scale * precisions[1]
    xp: uint256[N_COINS] = self.balances

    A_gamma: uint256[2] = self._A_gamma()
    D: uint256 = self.D
    if self.future_A_gamma_time > 0:
        D = self.newton_D(A_gamma[0], A_gamma[1], self.xp())

    xp[i] += dx
    xp = [xp[0] * precisions[0], xp[1] * price_scale / PRECISION]

    y: uint256 = self.newton_y(A_gamma[0], A_gamma[1], xp, D, j)
    dy: uint256 = xp[j] - y - 1
    xp[j] = y
    if j > 0:
        dy = dy * PRECISION / price_scale
    else:
        dy /= precisions[0]
    dy -= self._fee(xp) * dy / 10**10

    return dy


@view
@external
def calc_token_amount(amounts: uint256[N_COINS]) -> uint256:
    token_supply: uint256 = CurveToken(self.token).totalSupply()
    precisions: uint256[2] = self._get_precisions()
    price_scale: uint256 = self.price_scale * precisions[1]
    A_gamma: uint256[2] = self._A_gamma()
    xp: uint256[N_COINS] = self.xp()
    amountsp: uint256[N_COINS] = [
        amounts[0] * precisions[0],
        amounts[1] * price_scale / PRECISION]
    D0: uint256 = self.D
    if self.future_A_gamma_time > 0:
        D0 = self.newton_D(A_gamma[0], A_gamma[1], xp)
    xp[0] += amountsp[0]
    xp[1] += amountsp[1]
    D: uint256 = self.newton_D(A_gamma[0], A_gamma[1], xp)
    d_token: uint256 = token_supply * D / D0 - token_supply
    d_token -= self._calc_token_fee(amountsp, xp) * d_token / 10**10 + 1
    return d_token


@view
@external
def calc_withdraw_one_coin(token_amount: uint256, i: uint256) -> uint256:
    return self._calc_withdraw_one_coin(self._A_gamma(), token_amount, i, True, False)[0]


@external
@view
def lp_price() -> uint256:
    """
    Approximate LP token price
    """
    return 2 * self.virtual_price * self.sqrt_int(self.internal_price_oracle()) / 10**18


@view
@external
def A() -> uint256:
    return self._A_gamma()[0]


@view
@external
def gamma() -> uint256:
    return self._A_gamma()[1]


@external
@view
def fee() -> uint256:
    return self._fee(self.xp())


@external
@view
def get_virtual_price() -> uint256:
    return 10**18 * self.get_xcp(self.D) / CurveToken(self.token).totalSupply()


@external
@view
def price_oracle() -> uint256:
    return self.internal_price_oracle()


# Initializer


@external
def initialize(
    A: uint256,
    gamma: uint256,
    mid_fee: uint256,
    out_fee: uint256,
    allowed_extra_profit: uint256,
    fee_gamma: uint256,
    adjustment_step: uint256,
    admin_fee: uint256,
    ma_half_time: uint256,
    initial_price: uint256,
    _token: address,
    _coins: address[N_COINS],
    _precisions: uint256,
):
    assert self.mid_fee == 0  # dev: check that we call it from factory

    self.factory = msg.sender

    # Pack A and gamma:
    # shifted A + gamma
    A_gamma: uint256 = shift(A, 128)
    A_gamma = bitwise_or(A_gamma, gamma)
    self.initial_A_gamma = A_gamma
    self.future_A_gamma = A_gamma

    self.mid_fee = mid_fee
    self.out_fee = out_fee
    self.allowed_extra_profit = allowed_extra_profit
    self.fee_gamma = fee_gamma
    self.adjustment_step = adjustment_step
    self.admin_fee = admin_fee

    self.price_scale = initial_price
    self._price_oracle = initial_price
    self.last_prices = initial_price
    self.last_prices_timestamp = block.timestamp
    self.ma_half_time = ma_half_time

    self.xcp_profit_a = 10**18

    self.token = _token
    self.coins = _coins
    self.PRECISIONS = _precisions

# @version 0.3.1
"""
@title Curve LP Token V5
@author Curve.Fi
@notice Base implementation for an LP token provided for supplying liquidity
@dev Follows the ERC-20 token standard as defined at https://eips.ethereum.org/EIPS/eip-20
"""
from vyper.interfaces import ERC20

implements: ERC20


interface ERC1271:
    def isValidSignature(_hash: bytes32, _signature: Bytes[65]) -> bytes32: view


event Approval:
    _owner: indexed(address)
    _spender: indexed(address)
    _value: uint256

event Transfer:
    _from: indexed(address)
    _to: indexed(address)
    _value: uint256


EIP712_TYPEHASH: constant(bytes32) = keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
PERMIT_TYPEHASH: constant(bytes32) = keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")

# keccak256("isValidSignature(bytes32,bytes)")[:4] << 224
ERC1271_MAGIC_VAL: constant(bytes32) = 0x1626ba7e00000000000000000000000000000000000000000000000000000000
VERSION: constant(String[8]) = "v5.0.0"


name: public(String[64])
symbol: public(String[32])
DOMAIN_SEPARATOR: public(bytes32)

balanceOf: public(HashMap[address, uint256])
allowance: public(HashMap[address, HashMap[address, uint256]])
totalSupply: public(uint256)

minter: public(address)
nonces: public(HashMap[address, uint256])


@external
def __init__():
    self.minter = 0x0000000000000000000000000000000000000001


@external
def transfer(_to: address, _value: uint256) -> bool:
    """
    @dev Transfer token for a specified address
    @param _to The address to transfer to.
    @param _value The amount to be transferred.
    """
    # NOTE: vyper does not allow underflows
    #       so the following subtraction would revert on insufficient balance
    self.balanceOf[msg.sender] -= _value
    self.balanceOf[_to] += _value

    log Transfer(msg.sender, _to, _value)
    return True


@external
def transferFrom(_from: address, _to: address, _value: uint256) -> bool:
    """
     @dev Transfer tokens from one address to another.
     @param _from address The address which you want to send tokens from
     @param _to address The address which you want to transfer to
     @param _value uint256 the amount of tokens to be transferred
    """
    self.balanceOf[_from] -= _value
    self.balanceOf[_to] += _value

    _allowance: uint256 = self.allowance[_from][msg.sender]
    if _allowance != MAX_UINT256:
        self.allowance[_from][msg.sender] = _allowance - _value

    log Transfer(_from, _to, _value)
    return True


@external
def approve(_spender: address, _value: uint256) -> bool:
    """
    @notice Approve the passed address to transfer the specified amount of
            tokens on behalf of msg.sender
    @dev Beware that changing an allowance via this method brings the risk
         that someone may use both the old and new allowance by unfortunate
         transaction ordering. This may be mitigated with the use of
         {increaseAllowance} and {decreaseAllowance}.
         https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
    @param _spender The address which will transfer the funds
    @param _value The amount of tokens that may be transferred
    @return bool success
    """
    self.allowance[msg.sender][_spender] = _value

    log Approval(msg.sender, _spender, _value)
    return True


@external
def permit(
    _owner: address,
    _spender: address,
    _value: uint256,
    _deadline: uint256,
    _v: uint8,
    _r: bytes32,
    _s: bytes32
) -> bool:
    """
    @notice Approves spender by owner's signature to expend owner's tokens.
        See https://eips.ethereum.org/EIPS/eip-2612.
    @dev Inspired by https://github.com/yearn/yearn-vaults/blob/main/contracts/Vault.vy#L753-L793
    @dev Supports smart contract wallets which implement ERC1271
        https://eips.ethereum.org/EIPS/eip-1271
    @param _owner The address which is a source of funds and has signed the Permit.
    @param _spender The address which is allowed to spend the funds.
    @param _value The amount of tokens to be spent.
    @param _deadline The timestamp after which the Permit is no longer valid.
    @param _v The bytes[64] of the valid secp256k1 signature of permit by owner
    @param _r The bytes[0:32] of the valid secp256k1 signature of permit by owner
    @param _s The bytes[32:64] of the valid secp256k1 signature of permit by owner
    @return True, if transaction completes successfully
    """
    assert _owner != ZERO_ADDRESS
    assert block.timestamp <= _deadline

    nonce: uint256 = self.nonces[_owner]
    digest: bytes32 = keccak256(
        concat(
            b"\x19\x01",
            self.DOMAIN_SEPARATOR,
            keccak256(_abi_encode(PERMIT_TYPEHASH, _owner, _spender, _value, nonce, _deadline))
        )
    )

    if _owner.is_contract:
        sig: Bytes[65] = concat(_abi_encode(_r, _s), slice(convert(_v, bytes32), 31, 1))
        # reentrancy not a concern since this is a staticcall
        assert ERC1271(_owner).isValidSignature(digest, sig) == ERC1271_MAGIC_VAL
    else:
        assert ecrecover(digest, convert(_v, uint256), convert(_r, uint256), convert(_s, uint256)) == _owner

    self.allowance[_owner][_spender] = _value
    self.nonces[_owner] = nonce + 1

    log Approval(_owner, _spender, _value)
    return True


@external
def increaseAllowance(_spender: address, _added_value: uint256) -> bool:
    """
    @notice Increase the allowance granted to `_spender` by the caller
    @dev This is alternative to {approve} that can be used as a mitigation for
         the potential race condition
    @param _spender The address which will transfer the funds
    @param _added_value The amount of to increase the allowance
    @return bool success
    """
    allowance: uint256 = self.allowance[msg.sender][_spender] + _added_value
    self.allowance[msg.sender][_spender] = allowance

    log Approval(msg.sender, _spender, allowance)
    return True


@external
def decreaseAllowance(_spender: address, _subtracted_value: uint256) -> bool:
    """
    @notice Decrease the allowance granted to `_spender` by the caller
    @dev This is alternative to {approve} that can be used as a mitigation for
         the potential race condition
    @param _spender The address which will transfer the funds
    @param _subtracted_value The amount of to decrease the allowance
    @return bool success
    """
    allowance: uint256 = self.allowance[msg.sender][_spender] - _subtracted_value
    self.allowance[msg.sender][_spender] = allowance

    log Approval(msg.sender, _spender, allowance)
    return True


@external
def mint(_to: address, _value: uint256) -> bool:
    """
    @dev Mint an amount of the token and assigns it to an account.
         This encapsulates the modification of balances such that the
         proper events are emitted.
    @param _to The account that will receive the created tokens.
    @param _value The amount that will be created.
    """
    assert msg.sender == self.minter

    self.totalSupply += _value
    self.balanceOf[_to] += _value

    log Transfer(ZERO_ADDRESS, _to, _value)
    return True


@external
def mint_relative(_to: address, frac: uint256) -> uint256:
    """
    @dev Increases supply by factor of (1 + frac/1e18) and mints it for _to
    """
    assert msg.sender == self.minter

    supply: uint256 = self.totalSupply
    d_supply: uint256 = supply * frac / 10**18
    if d_supply > 0:
        self.totalSupply = supply + d_supply
        self.balanceOf[_to] += d_supply
        log Transfer(ZERO_ADDRESS, _to, d_supply)

    return d_supply


@external
def burnFrom(_to: address, _value: uint256) -> bool:
    """
    @dev Burn an amount of the token from a given account.
    @param _to The account whose tokens will be burned.
    @param _value The amount that will be burned.
    """
    assert msg.sender == self.minter

    self.totalSupply -= _value
    self.balanceOf[_to] -= _value

    log Transfer(_to, ZERO_ADDRESS, _value)
    return True


@view
@external
def decimals() -> uint8:
    """
    @notice Get the number of decimals for this token
    @dev Implemented as a view method to reduce gas costs
    @return uint8 decimal places
    """
    return 18


@view
@external
def version() -> String[8]:
    """
    @notice Get the version of this token contract
    """
    return VERSION


@external
def initialize(_name: String[64], _symbol: String[32], _pool: address):
    assert self.minter == ZERO_ADDRESS  # dev: check that we call it from factory

    self.name = _name
    self.symbol = _symbol
    self.minter = _pool

    self.DOMAIN_SEPARATOR = keccak256(
        _abi_encode(EIP712_TYPEHASH, keccak256(_name), keccak256(VERSION), chain.id, self)
    )

    # fire a transfer event so block explorers identify the contract as an ERC20
    log Transfer(ZERO_ADDRESS, msg.sender, 0)