// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd.
pragma solidity >=0.6.10 <0.8.0;
import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import {Ownable} from '@openzeppelin/contracts/access/Ownable.sol';
import {Pausable} from '@openzeppelin/contracts/utils/Pausable.sol';
import {SafeMath} from '@openzeppelin/contracts/math/SafeMath.sol';
import {IVerifier} from './interfaces/IVerifier.sol';
import {IRollupProcessor} from './interfaces/IRollupProcessor.sol';
import {IFeeDistributor} from './interfaces/IFeeDistributor.sol';
import {IERC20Permit} from './interfaces/IERC20Permit.sol';
import {Decoder} from './Decoder.sol';
import './libraries/RollupProcessorLibrary.sol';
/**
 * @title Rollup Processor
 * @dev Smart contract responsible for processing Aztec zkRollups, including relaying them to a verifier
 * contract for validation and performing all relevant ERC20 token transfers
 */
contract RollupProcessor is IRollupProcessor, Decoder, Ownable, Pausable {
    using SafeMath for uint256;
    bytes32 public dataRoot = 0x2708a627d38d74d478f645ec3b4e91afa325331acf1acebe9077891146b75e39;
    bytes32 public nullRoot = 0x2694dbe3c71a25d92213422d392479e7b8ef437add81e1e17244462e6edca9b1;
    bytes32 public rootRoot = 0x2d264e93dc455751a721aead9dba9ee2a9fef5460921aeede73f63f6210e6851;
    uint256 public dataSize;
    uint256 public nextRollupId;
    IVerifier public verifier;
    uint256 public constant numberOfAssets = 4;
    uint256 public constant txNumPubInputs = 12;
    uint256 public constant rollupNumPubInputs = 10 + numberOfAssets;
    uint256 public constant txPubInputLength = txNumPubInputs * 32; // public inputs length for of each inner proof tx
    uint256 public constant rollupPubInputLength = rollupNumPubInputs * 32;
    uint256 public constant ethAssetId = 0;
    uint256 public immutable escapeBlockLowerBound;
    uint256 public immutable escapeBlockUpperBound;
    event RollupProcessed(
        uint256 indexed rollupId,
        bytes32 dataRoot,
        bytes32 nullRoot,
        bytes32 rootRoot,
        uint256 dataSize
    );
    event Deposit(uint256 assetId, address depositorAddress, uint256 depositValue);
    event Withdraw(uint256 assetId, address withdrawAddress, uint256 withdrawValue);
    event WithdrawError(bytes errorReason);
    event AssetAdded(uint256 indexed assetId, address indexed assetAddress);
    event RollupProviderUpdated(address indexed providerAddress, bool valid);
    event VerifierUpdated(address indexed verifierAddress);
    // Array of supported ERC20 token address.
    address[] public supportedAssets;
    // Mapping which maps an asset address to a bool, determining whether it supports
    // permit as according to ERC-2612
    mapping(address => bool) assetPermitSupport;
    // Mapping from assetId to mapping of userAddress to public userBalance stored on this contract
    mapping(uint256 => mapping(address => uint256)) public userPendingDeposits;
    mapping(address => mapping(bytes32 => bool)) public depositProofApprovals;
    mapping(address => bool) public rollupProviders;
    address public override feeDistributor;
    // Metrics
    uint256[] public totalPendingDeposit;
    uint256[] public totalDeposited;
    uint256[] public totalWithdrawn;
    uint256[] public totalFees;
    constructor(
        address _verifierAddress,
        uint256 _escapeBlockLowerBound,
        uint256 _escapeBlockUpperBound,
        address _contractOwner
    ) public {
        verifier = IVerifier(_verifierAddress);
        escapeBlockLowerBound = _escapeBlockLowerBound;
        escapeBlockUpperBound = _escapeBlockUpperBound;
        rollupProviders[msg.sender] = true;
        totalPendingDeposit.push(0);
        totalDeposited.push(0);
        totalWithdrawn.push(0);
        totalFees.push(0);
        transferOwnership(_contractOwner);
    }
    function setRollupProvider(address providerAddress, bool valid) public override onlyOwner {
        rollupProviders[providerAddress] = valid;
        emit RollupProviderUpdated(providerAddress, valid);
    }
    function setVerifier(address _verifierAddress) public override onlyOwner {
        verifier = IVerifier(_verifierAddress);
        emit VerifierUpdated(_verifierAddress);
    }
    function setFeeDistributor(address feeDistributorAddress) public override onlyOwner {
        feeDistributor = feeDistributorAddress;
    }
    /**
     * @dev Approve a proofHash for spending a users deposited funds, this is one way and must be called by the owner of the funds
     * @param _proofHash - keccack256 hash of the inner proof public inputs
     */
    function approveProof(bytes32 _proofHash) public override whenNotPaused {
        depositProofApprovals[msg.sender][_proofHash] = true;
    }
    /**
     * @dev Get the ERC20 token address of a supported asset, for a given assetId
     * @param assetId - identifier used to denote a particular asset
     */
    function getSupportedAsset(uint256 assetId) public view override returns (address) {
        if (assetId == ethAssetId) {
            return address(0x0);
        }
        return supportedAssets[assetId - 1];
    }
    /**
     * @dev Get the addresses of all supported ERC20 tokens
     */
    function getSupportedAssets() external view override returns (address[] memory) {
        return supportedAssets;
    }
    function getTotalDeposited() external view override returns (uint256[] memory) {
        return totalDeposited;
    }
    function getTotalWithdrawn() external view override returns (uint256[] memory) {
        return totalWithdrawn;
    }
    function getTotalPendingDeposit() external view override returns (uint256[] memory) {
        return totalPendingDeposit;
    }
    function getTotalFees() external view override returns (uint256[] memory) {
        return totalFees;
    }
    /**
     * @dev Get the status of whether an asset supports the permit ERC-2612 approval flow
     * @param assetId - unique identifier of the supported asset
     */
    function getAssetPermitSupport(uint256 assetId) external view override returns (bool) {
        address assetAddress = getSupportedAsset(assetId);
        return assetPermitSupport[assetAddress];
    }
    /**
     * @dev Get the status of the escape hatch, specifically retrieve whether the
     * hatch is open and also the number of blocks until the hatch will switch from
     * open to closed or vice versa
     */
    function getEscapeHatchStatus() public view override returns (bool, uint256) {
        uint256 blockNum = block.number;
        bool isOpen = blockNum % escapeBlockUpperBound >= escapeBlockLowerBound;
        uint256 blocksRemaining = 0;
        if (isOpen) {
            // num blocks escape hatch will remain open for
            blocksRemaining = escapeBlockUpperBound - (blockNum % escapeBlockUpperBound);
        } else {
            // num blocks until escape hatch will be opened
            blocksRemaining = escapeBlockLowerBound - (blockNum % escapeBlockUpperBound);
        }
        return (isOpen, blocksRemaining);
    }
    /**
     * @dev Get the balance of a user, for a particular asset, held on the user's behalf
     * by this contract
     * @param assetId - unique identifier of the asset
     * @param userAddress - Ethereum address of the user who's balance is being queried
     */
    function getUserPendingDeposit(uint256 assetId, address userAddress) external view override returns (uint256) {
        return userPendingDeposits[assetId][userAddress];
    }
    /**
     * @dev Increase the userPendingDeposits mapping
     */
    function increasePendingDepositBalance(
        uint256 assetId,
        address depositorAddress,
        uint256 amount
    ) internal {
        userPendingDeposits[assetId][depositorAddress] = userPendingDeposits[assetId][depositorAddress].add(amount);
        totalPendingDeposit[assetId] = totalPendingDeposit[assetId].add(amount);
    }
    /**
     * @dev Decrease the userPendingDeposits mapping
     */
    function decreasePendingDepositBalance(
        uint256 assetId,
        address transferFromAddress,
        uint256 amount
    ) internal {
        uint256 userBalance = userPendingDeposits[assetId][transferFromAddress];
        require(userBalance >= amount, 'Rollup Processor: INSUFFICIENT_DEPOSIT');
        userPendingDeposits[assetId][transferFromAddress] = userBalance.sub(amount);
        totalPendingDeposit[assetId] = totalPendingDeposit[assetId].sub(amount);
        totalDeposited[assetId] = totalDeposited[assetId].add(amount);
    }
    /**
     * @dev Set the mapping between an assetId and the address of the linked asset.
     * Protected by onlyOwner
     * @param linkedToken - address of the asset
     * @param supportsPermit - bool determining whether this supports permit
     */
    function setSupportedAsset(address linkedToken, bool supportsPermit) external override onlyOwner {
        require(linkedToken != address(0x0), 'Rollup Processor: ZERO_ADDRESS');
        supportedAssets.push(linkedToken);
        assetPermitSupport[linkedToken] = supportsPermit;
        uint256 assetId = supportedAssets.length;
        require(assetId < numberOfAssets, 'Rollup Processor: MAX_ASSET_REACHED');
        totalPendingDeposit.push(0);
        totalDeposited.push(0);
        totalWithdrawn.push(0);
        totalFees.push(0);
        emit AssetAdded(assetId, linkedToken);
    }
    /**
     * @dev Update the value indicating whether a linked asset supports permit.
     * Protected by onlyOwner
     * @param assetId - unique ID of the asset
     * @param supportsPermit - bool determining whether this supports permit
     */
    function setAssetPermitSupport(uint256 assetId, bool supportsPermit) external override onlyOwner {
        address assetAddress = getSupportedAsset(assetId);
        require(assetAddress != address(0x0), 'Rollup Processor: TOKEN_ASSET_NOT_LINKED');
        assetPermitSupport[assetAddress] = supportsPermit;
    }
    /**
     * @dev Deposit funds as part of the first stage of the two stage deposit. Non-permit flow
     * @param assetId - unique ID of the asset
     * @param amount - number of tokens being deposited
     * @param depositorAddress - address from which funds are being transferred to the contract
     */
    function depositPendingFunds(
        uint256 assetId,
        uint256 amount,
        address depositorAddress
    ) external payable override whenNotPaused {
        if (assetId == ethAssetId) {
            require(msg.value == amount, 'Rollup Processor: WRONG_AMOUNT');
            increasePendingDepositBalance(assetId, depositorAddress, amount);
        } else {
            require(msg.value == 0, 'Rollup Processor: WRONG_PAYMENT_TYPE');
            address assetAddress = getSupportedAsset(assetId);
            internalDeposit(assetId, assetAddress, depositorAddress, amount);
        }
    }
    /**
     * @dev Deposit funds as part of the first stage of the two stage deposit. Permit flow
     * @param assetId - unique ID of the asset
     * @param amount - number of tokens being deposited
     * @param depositorAddress - address from which funds are being transferred to the contract
     * @param spender - address being granted approval to spend the funds
     * @param permitApprovalAmount - amount permit signature is approving
     * @param deadline - when the permit signature expires
     * @param v - ECDSA sig param
     * @param r - ECDSA sig param
     * @param s - ECDSA sig param
     */
    function depositPendingFundsPermit(
        uint256 assetId,
        uint256 amount,
        address depositorAddress,
        address spender,
        uint256 permitApprovalAmount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        address assetAddress = getSupportedAsset(assetId);
        IERC20Permit(assetAddress).permit(depositorAddress, spender, permitApprovalAmount, deadline, v, r, s);
        internalDeposit(assetId, assetAddress, depositorAddress, amount);
    }
    /**
     * @dev Deposit funds as part of the first stage of the two stage deposit. Non-permit flow
     * @param assetId - unique ID of the asset
     * @param assetAddress - address of the ERC20 asset
     * @param depositorAddress - address from which funds are being transferred to the contract
     * @param amount - amount being deposited
     */
    function internalDeposit(
        uint256 assetId,
        address assetAddress,
        address depositorAddress,
        uint256 amount
    ) internal {
        // check user approved contract to transfer funds, so can throw helpful error to user
        uint256 rollupAllowance = IERC20(assetAddress).allowance(depositorAddress, address(this));
        require(rollupAllowance >= amount, 'Rollup Processor: INSUFFICIENT_TOKEN_APPROVAL');
        IERC20(assetAddress).transferFrom(depositorAddress, address(this), amount);
        increasePendingDepositBalance(assetId, depositorAddress, amount);
        emit Deposit(assetId, depositorAddress, amount);
    }
    /**
     * @dev Process a rollup - decode the rollup, update relevant state variables and
     * verify the proof
     * @param proofData - cryptographic proof data associated with a rollup
     * @param signatures - bytes array of secp256k1 ECDSA signatures, authorising a transfer of tokens
     * from the publicOwner for the particular inner proof in question. There is a signature for each
     * inner proof.
     *
     * Structure of each signature in the bytes array is:
     * 0x00 - 0x20 : r
     * 0x20 - 0x40 : s
     * 0x40 - 0x60 : v (in form: 0x0000....0001b for example)
     *
     * @param viewingKeys - viewingKeys for the notes submitted in the rollup. Note: not used in the logic
     * of the rollupProcessor contract, but called here as a convenient to place data on chain
     */
    function escapeHatch(
        bytes calldata proofData,
        bytes calldata signatures,
        bytes calldata viewingKeys
    ) external override whenNotPaused {
        (bool isOpen, ) = getEscapeHatchStatus();
        require(isOpen, 'Rollup Processor: ESCAPE_BLOCK_RANGE_INCORRECT');
        processRollupProof(proofData, signatures, viewingKeys);
    }
    function processRollup(
        bytes calldata proofData,
        bytes calldata signatures,
        bytes calldata viewingKeys,
        bytes calldata providerSignature,
        address provider,
        address payable feeReceiver,
        uint256 feeLimit
    ) external override whenNotPaused {
        uint256 initialGas = gasleft();
        require(rollupProviders[provider], 'Rollup Processor: UNKNOWN_PROVIDER');
        bytes memory sigData =
            abi.encodePacked(proofData[0:rollupPubInputLength], feeReceiver, feeLimit, feeDistributor);
        RollupProcessorLibrary.validateSignature(keccak256(sigData), providerSignature, provider);
        processRollupProof(proofData, signatures, viewingKeys);
        transferFee(proofData);
        (bool success, ) =
            feeDistributor.call(
                abi.encodeWithSignature(
                    'reimburseGas(uint256,uint256,address)',
                    initialGas - gasleft(),
                    feeLimit,
                    feeReceiver
                )
            );
        require(success, 'Rollup Processor: REIMBURSE_GAS_FAILED');
    }
    function processRollupProof(
        bytes memory proofData,
        bytes memory signatures,
        bytes calldata /*viewingKeys*/
    ) internal {
        uint256 numTxs = verifyProofAndUpdateState(proofData);
        processDepositsAndWithdrawals(proofData, numTxs, signatures);
    }
    /**
     * @dev Verify the zk proof and update the contract state variables with those provided by the rollup.
     * @param proofData - cryptographic zk proof data. Passed to the verifier for verification.
     */
    function verifyProofAndUpdateState(bytes memory proofData) internal returns (uint256) {
        (
            bytes32 newDataRoot,
            bytes32 newNullRoot,
            uint256 rollupId,
            uint256 rollupSize,
            bytes32 newRootRoot,
            uint256 numTxs,
            uint256 newDataSize
        ) = validateMerkleRoots(proofData);
        // Verify the rollup proof.
        //
        // We manually call the verifier contract via assembly. This is to prevent a
        // redundant copy of `proofData` into memory, which costs between 100,000 to 1,000,000 gas
        // depending on the rollup size!
        bool proof_verified = false;
        address verifierAddress;
        uint256 temp1;
        uint256 temp2;
        uint256 temp3;
        assembly {
            // Step 1: we need to insert 68 bytes of verifier 'calldata' just prior to proofData
            // Start by defining the start of our 'calldata'. Also grab the verifier contract address from storage
            let inputPtr := sub(proofData, 0x44)
            verifierAddress := sload(verifier_slot)
            // Step 2: we need to overwrite the memory between `inputPtr` and `inputPtr + 68`
            // we load the existing 68 bytes of memory into stack variables temp1, temp2, temp3
            // Once we have called the verifier contract, we will write this data back into memory
            temp1 := mload(inputPtr)
            temp2 := mload(add(inputPtr, 0x20))
            temp3 := mload(add(inputPtr, 0x40))
            // Step 3: insert our calldata into memory
            // We call the function `verify(bytes,uint256)`
            // The function signature is 0xac318c5d
            // Calldata map is:
            // 0x00 - 0x04 : 0xac318c5d
            // 0x04 - 0x24 : 0x40 (number of bytes between 0x04 and the start of the `proofData` array at 0x44)
            // 0x24 - 0x44 : rollupSize
            // 0x44 - .... : proofData (already present in memory)
            mstore8(inputPtr, 0xac)
            mstore8(add(inputPtr, 0x01), 0x31)
            mstore8(add(inputPtr, 0x02), 0x8c)
            mstore8(add(inputPtr, 0x03), 0x5d)
            mstore(add(inputPtr, 0x04), 0x40)
            mstore(add(inputPtr, 0x24), rollupSize)
            // Total calldata size is proofData.length + 96 bytes (the 66 bytes we just wrote, plus the 32 byte 'length' field of proofData)
            let callSize := add(mload(proofData), 0x64)
            // Step 4: Call our verifier contract. If does not return any values, but will throw an error if the proof is not valid
            // i.e. verified == false if proof is not valid
            proof_verified := staticcall(gas(), verifierAddress, inputPtr, callSize, 0x00, 0x00)
            // Step 5: Restore the memory we overwrote with our 'calldata'
            mstore(inputPtr, temp1)
            mstore(add(inputPtr, 0x20), temp2)
            mstore(add(inputPtr, 0x40), temp3)
        }
        // Check the proof is valid!
        require(proof_verified, 'proof verification failed');
        // Update state variables.
        dataRoot = newDataRoot;
        nullRoot = newNullRoot;
        nextRollupId = rollupId.add(1);
        rootRoot = newRootRoot;
        dataSize = newDataSize;
        emit RollupProcessed(rollupId, dataRoot, nullRoot, rootRoot, dataSize);
        return numTxs;
    }
    /**
     * @dev Extract public inputs and validate they are inline with current contract state.
     * @param proofData - Rollup proof data.
     */
    function validateMerkleRoots(bytes memory proofData)
        internal
        view
        returns (
            bytes32,
            bytes32,
            uint256,
            uint256,
            bytes32,
            uint256,
            uint256
        )
    {
        (
            // Stack to deep workaround:
            // 0: rollupId
            // 1: rollupSize
            // 2: dataStartIndex
            // 3: numTxs
            uint256[4] memory nums,
            bytes32 oldDataRoot,
            bytes32 newDataRoot,
            bytes32 oldNullRoot,
            bytes32 newNullRoot,
            bytes32 oldRootRoot,
            bytes32 newRootRoot
        ) = decodeProof(proofData, numberOfAssets);
        // Escape hatch denominated by a rollup size of 0, which means inserting 2 new entries.
        nums[3] = nums[1] == 0 ? 1 : nums[1];
        // Ensure we are inserting at the next subtree boundary.
        uint256 toInsert = nums[3].mul(2);
        if (dataSize % toInsert == 0) {
            require(nums[2] == dataSize, 'Rollup Processor: INCORRECT_DATA_START_INDEX');
        } else {
            uint256 expected = dataSize + toInsert - (dataSize % toInsert);
            require(nums[2] == expected, 'Rollup Processor: INCORRECT_DATA_START_INDEX');
        }
        // Data validation checks.
        require(oldDataRoot == dataRoot, 'Rollup Processor: INCORRECT_DATA_ROOT');
        require(oldNullRoot == nullRoot, 'Rollup Processor: INCORRECT_NULL_ROOT');
        require(oldRootRoot == rootRoot, 'Rollup Processor: INCORRECT_ROOT_ROOT');
        require(nums[0] == nextRollupId, 'Rollup Processor: ID_NOT_SEQUENTIAL');
        return (newDataRoot, newNullRoot, nums[0], nums[1], newRootRoot, nums[3], nums[2] + toInsert);
    }
    /**
     * @dev Process deposits and withdrawls.
     * @param proofData - the proof data
     * @param numTxs - number of transactions rolled up in the proof
     * @param signatures - bytes array of secp256k1 ECDSA signatures, authorising a transfer of tokens
     */
    function processDepositsAndWithdrawals(
        bytes memory proofData,
        uint256 numTxs,
        bytes memory signatures
    ) internal {
        uint256 sigIndex = 0x00;
        uint256 proofDataPtr;
        assembly {
            proofDataPtr := add(proofData, 0x20) // add 0x20 to skip over 1st field in bytes array (the length field)
        }
        proofDataPtr += rollupPubInputLength; // update pointer to skip over rollup public inputs and point to inner tx public inputs
        uint256 end = proofDataPtr + (numTxs * txPubInputLength);
        uint256 stepSize = txPubInputLength;
        // This is a bit of a hot loop, we iterate over every tx to determine whether to process deposits or withdrawals.
        while (proofDataPtr < end) {
            // extract the minimum information we need to determine whether to skip this iteration
            uint256 proofId;
            uint256 publicInput;
            uint256 publicOutput;
            bool txNeedsProcessing;
            assembly {
                proofId := mload(proofDataPtr)
                publicInput := mload(add(proofDataPtr, 0x20))
                publicOutput := mload(add(proofDataPtr, 0x40))
                // only process deposits and withdrawals iff
                // the proofId == 0 (not an account proof) and publicInput > 0 OR publicOutput > 0
                txNeedsProcessing := and(iszero(proofId), or(not(iszero(publicInput)), not(iszero(publicOutput))))
            }
            if (txNeedsProcessing) {
                // extract asset Id
                uint256 assetId;
                assembly {
                    assetId := mload(add(proofDataPtr, 0x60))
                }
                if (publicInput > 0) {
                    // validate user has approved deposit
                    address inputOwner;
                    bytes32 digest;
                    assembly {
                        inputOwner := mload(add(proofDataPtr, 0x140))
                        // compute the message digest to check if user has approved tx
                        digest := keccak256(proofDataPtr, stepSize)
                    }
                    if (!depositProofApprovals[inputOwner][digest]) {
                        // extract and validate signature
                        // we can create a bytes memory container for the signature without allocating new memory,
                        // by overwriting the previous 32 bytes in the `signatures` array with the 'length' of our synthetic byte array (92)
                        // we store the memory we overwrite in `temp`, so that we can restore it
                        bytes memory signature;
                        uint256 temp;
                        assembly {
                            // set `signature` to point to 32 bytes less than the desired `r, s, v` values in `signatures`
                            signature := add(signatures, sigIndex)
                            // cache the memory we're about to overwrite
                            temp := mload(signature)
                            // write in a 92-byte 'length' parameter into the `signature` bytes array
                            mstore(signature, 0x60)
                        }
                        // validate the signature
                        RollupProcessorLibrary.validateUnpackedSignature(digest, signature, inputOwner);
                        // restore the memory we overwrote
                        assembly {
                            mstore(signature, temp)
                            sigIndex := add(sigIndex, 0x60)
                        }
                    }
                    decreasePendingDepositBalance(assetId, inputOwner, publicInput);
                }
                if (publicOutput > 0) {
                    address outputOwner;
                    assembly {
                        outputOwner := mload(add(proofDataPtr, 0x160))
                    }
                    withdraw(publicOutput, outputOwner, assetId);
                }
            }
            proofDataPtr += txPubInputLength;
        }
    }
    function transferFee(bytes memory proofData) internal {
        for (uint256 i = 0; i < numberOfAssets; ++i) {
            uint256 txFee = extractTotalTxFee(proofData, i);
            if (txFee > 0) {
                bool success;
                if (i == ethAssetId) {
                    (success, ) = payable(feeDistributor).call{value: txFee}('');
                } else {
                    address assetAddress = getSupportedAsset(i);
                    IERC20(assetAddress).approve(feeDistributor, txFee);
                    (success, ) = feeDistributor.call(abi.encodeWithSignature('deposit(uint256,uint256)', i, txFee));
                }
                require(success, 'Rollup Processor: DEPOSIT_TX_FEE_FAILED');
                totalFees[i] = totalFees[i].add(txFee);
            }
        }
    }
    /**
     * @dev Internal utility function to withdraw funds from the contract to a receiver address
     * @param withdrawValue - value being withdrawn from the contract
     * @param receiverAddress - address receiving public ERC20 tokens
     * @param assetId - ID of the asset for which a withdrawl is being performed
     */
    function withdraw(
        uint256 withdrawValue,
        address receiverAddress,
        uint256 assetId
    ) internal {
        require(receiverAddress != address(0), 'Rollup Processor: ZERO_ADDRESS');
        if (assetId == 0) {
            // We explicitly do not throw if this call fails, as this opens up the possiblity of
            // griefing attacks, as engineering a failed withdrawal will invalidate an entire rollup block
            payable(receiverAddress).call{gas: 30000, value: withdrawValue}('');
        } else {
            address assetAddress = getSupportedAsset(assetId);
            IERC20(assetAddress).transfer(receiverAddress, withdrawValue);
        }
        totalWithdrawn[assetId] = totalWithdrawn[assetId].add(withdrawValue);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./Context.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.10 <0.8.0;
interface IVerifier {
    function verify(bytes memory serialized_proof, uint256 _keyId) external;
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.10 <0.8.0;
interface IRollupProcessor {
    function feeDistributor() external view returns (address);
    function escapeHatch(
        bytes calldata proofData,
        bytes calldata signatures,
        bytes calldata viewingKeys
    ) external;
    function processRollup(
        bytes calldata proofData,
        bytes calldata signatures,
        bytes calldata viewingKeys,
        bytes calldata providerSignature,
        address provider,
        address payable feeReceiver,
        uint256 feeLimit
    ) external;
    function depositPendingFunds(
        uint256 assetId,
        uint256 amount,
        address owner
    ) external payable;
    function depositPendingFundsPermit(
        uint256 assetId,
        uint256 amount,
        address owner,
        address spender,
        uint256 permitApprovalAmount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    function setRollupProvider(address provderAddress, bool valid) external;
    function approveProof(bytes32 _proofHash) external;
    function setFeeDistributor(address feeDistributorAddress) external;
    function setVerifier(address verifierAddress) external;
    function setSupportedAsset(address linkedToken, bool supportsPermit) external;
    function setAssetPermitSupport(uint256 assetId, bool supportsPermit) external;
    function getSupportedAsset(uint256 assetId) external view returns (address);
    function getSupportedAssets() external view returns (address[] memory);
    function getTotalDeposited() external view returns (uint256[] memory);
    function getTotalWithdrawn() external view returns (uint256[] memory);
    function getTotalPendingDeposit() external view returns (uint256[] memory);
    function getTotalFees() external view returns (uint256[] memory);
    function getAssetPermitSupport(uint256 assetId) external view returns (bool);
    function getEscapeHatchStatus() external view returns (bool, uint256);
    function getUserPendingDeposit(uint256 assetId, address userAddress) external view returns (uint256);
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.10 <0.8.0;
interface IFeeDistributor {
    event FeeReimbursed(address receiver, uint256 amount);
    function txFeeBalance(uint256 assetId) external view returns (uint256);
    function deposit(uint256 assetId, uint256 amount) external payable returns (uint256 depositedAmount);
    function reimburseGas(
        uint256 gasUsed,
        uint256 feeLimit,
        address payable feeReceiver
    ) external returns (uint256 reimbursement);
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.10 <0.8.0;
import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
interface IERC20Permit is IERC20 {
    function nonces(address user) external view returns (uint256);
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.10 <0.8.0;
import {SafeMath} from '@openzeppelin/contracts/math/SafeMath.sol';
import {Types} from './verifier/cryptography/Types.sol';
import {Bn254Crypto} from './verifier/cryptography/Bn254Crypto.sol';
contract Decoder {
    using SafeMath for uint256;
    /**
     * @dev Decode the public inputs component of proofData. Required to update state variables
     * @param proofData - cryptographic proofData associated with a rollup
     */
    function decodeProof(bytes memory proofData, uint256 numberOfAssets)
        internal
        pure
        returns (
            uint256[4] memory nums,
            bytes32 oldDataRoot,
            bytes32 newDataRoot,
            bytes32 oldNullRoot,
            bytes32 newNullRoot,
            bytes32 oldRootRoot,
            bytes32 newRootRoot
        )
    {
        uint256 rollupId;
        uint256 rollupSize;
        uint256 dataStartIndex;
        uint256 numTxs;
        assembly {
            let dataStart := add(proofData, 0x20) // jump over first word, it's length of data
            rollupId := mload(dataStart)
            rollupSize := mload(add(dataStart, 0x20))
            dataStartIndex := mload(add(dataStart, 0x40))
            oldDataRoot := mload(add(dataStart, 0x60))
            newDataRoot := mload(add(dataStart, 0x80))
            oldNullRoot := mload(add(dataStart, 0xa0))
            newNullRoot := mload(add(dataStart, 0xc0))
            oldRootRoot := mload(add(dataStart, 0xe0))
            newRootRoot := mload(add(dataStart, 0x100))
            numTxs := mload(add(add(dataStart, 0x120), mul(0x20, numberOfAssets)))
        }
        return (
            [rollupId, rollupSize, dataStartIndex, numTxs],
            oldDataRoot,
            newDataRoot,
            oldNullRoot,
            newNullRoot,
            oldRootRoot,
            newRootRoot
        );
    }
    function extractTotalTxFee(bytes memory proofData, uint256 assetId) internal pure returns (uint256) {
        uint256 totalTxFee;
        assembly {
            totalTxFee := mload(add(add(proofData, 0x140), mul(0x20, assetId)))
        }
        return totalTxFee;
    }
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.10 <0.8.0;
library RollupProcessorLibrary {
    /**
    * Extracts the address of the signer with ECDSA. Performs checks on `s` and `v` to
    * to prevent signature malleability based attacks
    * @param digest - Hashed data being signed over.
    * @param signature - ECDSA signature over the secp256k1 elliptic curve.
    * @param signer - Address that signs the signature.
    */
    function validateSignature(
        bytes32 digest,
        bytes memory signature,
        address signer
    ) internal view {
        bool result;
        address recoveredSigner = address(0x0);
        require(signer != address(0x0), 'validateSignature: ZERO_ADDRESS');
        // prepend "\\x19Ethereum Signed Message:\
32" to the digest to create the signed message
        bytes32 message;
        assembly {
            mstore(0, "\\x19Ethereum Signed Message:\
32")
            mstore(add(0, 28), digest)
            message := keccak256(0, 60)
        }
        assembly {
            let mPtr := mload(0x40)
            let byteLength := mload(signature)
            // store the signature digest
            mstore(mPtr, message)
            // load 'v' - we need it for a condition check
            // add 0x60 to jump over 3 words - length of bytes array, r and s
            let v := shr(248, mload(add(signature, 0x60))) // bitshifting, to resemble padLeft
            let s := mload(add(signature, 0x40))
            /**
            * Original memory map for input to precompile
            *
            * signature : signature + 0x20            message
            * signature + 0x20 : signature + 0x40     r
            * signature + 0x40 : signature + 0x60     s
            * signature + 0x60 : signature + 0x80     v
            * Desired memory map for input to precompile
            *
            * signature : signature + 0x20            message
            * signature + 0x20 : signature + 0x40     v
            * signature + 0x40 : signature + 0x60     r
            * signature + 0x60 : signature + 0x80     s
            */
            // store s
            mstore(add(mPtr, 0x60), s)
            // store r
            mstore(add(mPtr, 0x40), mload(add(signature, 0x20)))
            // store v
            mstore(add(mPtr, 0x20), v)
            result := and(
                and(
                    // validate s is in lower half order
                    lt(s, 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A1),
                    and(
                        // validate signature length == 0x41
                        eq(byteLength, 0x41),
                        // validate v == 27 or v == 28
                        or(eq(v, 27), eq(v, 28))
                    )
                ),
                // validate call to ecrecover precompile succeeds
                staticcall(gas(), 0x01, mPtr, 0x80, mPtr, 0x20)
            )
            // save the recoveredSigner only if the first word in signature is not `message` anymore
            switch eq(message, mload(mPtr))
            case 0 {
                recoveredSigner := mload(mPtr)
            }
            mstore(mPtr, byteLength) // and put the byte length back where it belongs
        
            // validate that recoveredSigner is not address(0x00)
            result := and(result, not(iszero(recoveredSigner)))
        }
        require(result, 'validateSignature: signature recovery failed');
        require(recoveredSigner == signer, 'validateSignature: INVALID_SIGNATURE');
    }
    /**
    * Extracts the address of the signer with ECDSA. Performs checks on `s` and `v` to
    * to prevent signature malleability based attacks
    * This 'Unpacked' version expects 'signature' to be a 92-byte array.
    * i.e. the `v` parameter occupies a full 32 bytes of memory, not 1 byte 
    * @param digest - Hashed data being signed over.
    * @param signature - ECDSA signature over the secp256k1 elliptic curve.
    * @param signer - Address that signs the signature.
    */
    function validateUnpackedSignature(
        bytes32 digest,
        bytes memory signature,
        address signer
    ) internal view {
        bool result;
        address recoveredSigner = address(0x0);
        require(signer != address(0x0), 'validateSignature: ZERO_ADDRESS');
        // prepend "\\x19Ethereum Signed Message:\
32" to the digest to create the signed message
        bytes32 message;
        assembly {
            mstore(0, "\\x19Ethereum Signed Message:\
32")
            mstore(28, digest)
            message := keccak256(0, 60)
        }
        assembly {
            // There's a little trick we can pull. We expect `signature` to be a byte array, of length 0x60, with
            // 'v', 'r' and 's' located linearly in memory. Preceeding this is the length parameter of `signature`.
            // We *replace* the length param with the signature msg to get a memory block formatted for the precompile
            // load length as a temporary variable
            // N.B. we mutate the signature by re-ordering r, s, and v!
            let byteLength := mload(signature)
            // store the signature digest
            mstore(signature, message)
            // load 'v' - we need it for a condition check
            // add 0x60 to jump over 3 words - length of bytes array, r and s
            let v := mload(add(signature, 0x60))
            let s := mload(add(signature, 0x40))
            /**
            * Original memory map for input to precompile
            *
            * signature : signature + 0x20            message
            * signature + 0x20 : signature + 0x40     r
            * signature + 0x40 : signature + 0x60     s
            * signature + 0x60 : signature + 0x80     v
            * Desired memory map for input to precompile
            *
            * signature : signature + 0x20            message
            * signature + 0x20 : signature + 0x40     v
            * signature + 0x40 : signature + 0x60     r
            * signature + 0x60 : signature + 0x80     s
            */
            // move s to v position
            mstore(add(signature, 0x60), s)
            // move r to s position
            mstore(add(signature, 0x40), mload(add(signature, 0x20)))
            // move v to r position
            mstore(add(signature, 0x20), v)
            result := and(
                and(
                    // validate s is in lower half order
                    lt(s, 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A1),
                    and(
                        // validate signature length == 0x60 (unpacked)
                        eq(byteLength, 0x60),
                        // validate v == 27 or v == 28
                        or(eq(v, 27), eq(v, 28))
                    )
                ),
                // validate call to ecrecover precompile succeeds
                staticcall(gas(), 0x01, signature, 0x80, signature, 0x20)
            )
            // save the recoveredSigner only if the first word in signature is not `message` anymore
            switch eq(message, mload(signature))
            case 0 {
                recoveredSigner := mload(signature)
            }
            mstore(signature, byteLength) // and put the byte length back where it belongs
        
            // validate that recoveredSigner is not address(0x00)
            result := and(result, not(iszero(recoveredSigner)))
        }
        require(result, 'validateSignature: signature recovery failed');
        require(recoveredSigner == signer, 'validateSignature: INVALID_SIGNATURE');
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
/**
 * @title Bn254Crypto library used for the fr, g1 and g2 point types
 * @dev Used to manipulate fr, g1, g2 types, perform modular arithmetic on them and call
 * the precompiles add, scalar mul and pairing
 *
 * Notes on optimisations
 * 1) Perform addmod, mulmod etc. in assembly - removes the check that Solidity performs to confirm that
 * the supplied modulus is not 0. This is safe as the modulus's used (r_mod, q_mod) are hard coded
 * inside the contract and not supplied by the user
 */
library Types {
    uint256 constant PROGRAM_WIDTH = 4;
    uint256 constant NUM_NU_CHALLENGES = 11;
    uint256 constant coset_generator0 = 0x0000000000000000000000000000000000000000000000000000000000000005;
    uint256 constant coset_generator1 = 0x0000000000000000000000000000000000000000000000000000000000000006;
    uint256 constant coset_generator2 = 0x0000000000000000000000000000000000000000000000000000000000000007;
    // TODO: add external_coset_generator() method to compute this
    uint256 constant coset_generator7 = 0x000000000000000000000000000000000000000000000000000000000000000c;
    struct G1Point {
        uint256 x;
        uint256 y;
    }
    // G2 group element where x \\in Fq2 = x0 * z + x1
    struct G2Point {
        uint256 x0;
        uint256 x1;
        uint256 y0;
        uint256 y1;
    }
    // N>B. Do not re-order these fields! They must appear in the same order as they
    // appear in the proof data
    struct Proof {
        G1Point W1;
        G1Point W2;
        G1Point W3;
        G1Point W4;
        G1Point Z;
        G1Point T1;
        G1Point T2;
        G1Point T3;
        G1Point T4;
        uint256 w1;
        uint256 w2;
        uint256 w3;
        uint256 w4;
        uint256 sigma1;
        uint256 sigma2;
        uint256 sigma3;
        uint256 q_arith;
        uint256 q_ecc;
        uint256 q_c;
        uint256 linearization_polynomial;
        uint256 grand_product_at_z_omega;
        uint256 w1_omega;
        uint256 w2_omega;
        uint256 w3_omega;
        uint256 w4_omega;
        G1Point PI_Z;
        G1Point PI_Z_OMEGA;
        G1Point recursive_P1;
        G1Point recursive_P2;
        uint256 quotient_polynomial_eval;
    }
    struct ChallengeTranscript {
        uint256 alpha_base;
        uint256 alpha;
        uint256 zeta;
        uint256 beta;
        uint256 gamma;
        uint256 u;
        uint256 v0;
        uint256 v1;
        uint256 v2;
        uint256 v3;
        uint256 v4;
        uint256 v5;
        uint256 v6;
        uint256 v7;
        uint256 v8;
        uint256 v9;
        uint256 v10;
    }
    struct VerificationKey {
        uint256 circuit_size;
        uint256 num_inputs;
        uint256 work_root;
        uint256 domain_inverse;
        uint256 work_root_inverse;
        G1Point Q1;
        G1Point Q2;
        G1Point Q3;
        G1Point Q4;
        G1Point Q5;
        G1Point QM;
        G1Point QC;
        G1Point QARITH;
        G1Point QECC;
        G1Point QRANGE;
        G1Point QLOGIC;
        G1Point SIGMA1;
        G1Point SIGMA2;
        G1Point SIGMA3;
        G1Point SIGMA4;
        bool contains_recursive_proof;
        uint256 recursive_proof_indices;
        G2Point g2_x;
        // zeta challenge raised to the power of the circuit size.
        // Not actually part of the verification key, but we put it here to prevent stack depth errors
        uint256 zeta_pow_n;
    }
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from "./Types.sol";
/**
 * @title Bn254 elliptic curve crypto
 * @dev Provides some basic methods to compute bilinear pairings, construct group elements and misc numerical methods
 */
library Bn254Crypto {
    uint256 constant p_mod = 21888242871839275222246405745257275088696311157297823662689037894645226208583;
    uint256 constant r_mod = 21888242871839275222246405745257275088548364400416034343698204186575808495617;
    // Perform a modular exponentiation. This method is ideal for small exponents (~64 bits or less), as
    // it is cheaper than using the pow precompile
    function pow_small(
        uint256 base,
        uint256 exponent,
        uint256 modulus
    ) internal pure returns (uint256) {
        uint256 result = 1;
        uint256 input = base;
        uint256 count = 1;
        assembly {
            let endpoint := add(exponent, 0x01)
            for {} lt(count, endpoint) { count := add(count, count) }
            {
                if and(exponent, count) {
                    result := mulmod(result, input, modulus)
                }
                input := mulmod(input, input, modulus)
            }
        }
        return result;
    }
    function invert(uint256 fr) internal view returns (uint256)
    {
        uint256 output;
        bool success;
        uint256 p = r_mod;
        assembly {
            let mPtr := mload(0x40)
            mstore(mPtr, 0x20)
            mstore(add(mPtr, 0x20), 0x20)
            mstore(add(mPtr, 0x40), 0x20)
            mstore(add(mPtr, 0x60), fr)
            mstore(add(mPtr, 0x80), sub(p, 2))
            mstore(add(mPtr, 0xa0), p)
            success := staticcall(gas(), 0x05, mPtr, 0xc0, 0x00, 0x20)
            output := mload(0x00)
        }
        require(success, "pow precompile call failed!");
        return output;
    }
    function new_g1(uint256 x, uint256 y)
        internal
        pure
        returns (Types.G1Point memory)
    {
        uint256 xValue;
        uint256 yValue;
        assembly {
            xValue := mod(x, r_mod)
            yValue := mod(y, r_mod)
        }
        return Types.G1Point(xValue, yValue);
    }
    function new_g2(uint256 x0, uint256 x1, uint256 y0, uint256 y1)
        internal
        pure
        returns (Types.G2Point memory)
    {
        return Types.G2Point(x0, x1, y0, y1);
    }
    function P1() internal pure returns (Types.G1Point memory) {
        return Types.G1Point(1, 2);
    }
    function P2() internal pure returns (Types.G2Point memory) {
        return Types.G2Point({
            x0: 0x198e9393920d483a7260bfb731fb5d25f1aa493335a9e71297e485b7aef312c2,
            x1: 0x1800deef121f1e76426a00665e5c4479674322d4f75edadd46debd5cd992f6ed,
            y0: 0x090689d0585ff075ec9e99ad690c3395bc4b313370b38ef355acdadcd122975b,
            y1: 0x12c85ea5db8c6deb4aab71808dcb408fe3d1e7690c43d37b4ce6cc0166fa7daa
        });
    }
    /// Evaluate the following pairing product:
    /// e(a1, a2).e(-b1, b2) == 1
    function pairingProd2(
        Types.G1Point memory a1,
        Types.G2Point memory a2,
        Types.G1Point memory b1,
        Types.G2Point memory b2
    ) internal view returns (bool) {
        validateG1Point(a1);
        validateG1Point(b1);
        bool success;
        uint256 out;
        assembly {
            let mPtr := mload(0x40)
            mstore(mPtr, mload(a1))
            mstore(add(mPtr, 0x20), mload(add(a1, 0x20)))
            mstore(add(mPtr, 0x40), mload(a2))
            mstore(add(mPtr, 0x60), mload(add(a2, 0x20)))
            mstore(add(mPtr, 0x80), mload(add(a2, 0x40)))
            mstore(add(mPtr, 0xa0), mload(add(a2, 0x60)))
            mstore(add(mPtr, 0xc0), mload(b1))
            mstore(add(mPtr, 0xe0), mload(add(b1, 0x20)))
            mstore(add(mPtr, 0x100), mload(b2))
            mstore(add(mPtr, 0x120), mload(add(b2, 0x20)))
            mstore(add(mPtr, 0x140), mload(add(b2, 0x40)))
            mstore(add(mPtr, 0x160), mload(add(b2, 0x60)))
            success := staticcall(
                gas(),
                8,
                mPtr,
                0x180,
                0x00,
                0x20
            )
            out := mload(0x00)
        }
        require(success, "Pairing check failed!");
        return (out != 0);
    }
    /**
    * validate the following:
    *   x != 0
    *   y != 0
    *   x < p
    *   y < p
    *   y^2 = x^3 + 3 mod p
    */
    function validateG1Point(Types.G1Point memory point) internal pure {
        bool is_well_formed;
        uint256 p = p_mod;
        assembly {
            let x := mload(point)
            let y := mload(add(point, 0x20))
            is_well_formed := and(
                and(
                    and(lt(x, p), lt(y, p)),
                    not(or(iszero(x), iszero(y)))
                ),
                eq(mulmod(y, y, p), addmod(mulmod(x, mulmod(x, x, p), p), 3, p))
            )
        }
        require(is_well_formed, "Bn254: G1 point not on curve, or is malformed");
    }
}