// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
import { iL1ChugSplashDeployer } from "./interfaces/iL1ChugSplashDeployer.sol";
/**
 * @title L1ChugSplashProxy
 * @dev Basic ChugSplash proxy contract for L1. Very close to being a normal proxy but has added
 * functions `setCode` and `setStorage` for changing the code or storage of the contract. Nifty!
 *
 * Note for future developers: do NOT make anything in this contract 'public' unless you know what
 * you're doing. Anything public can potentially have a function signature that conflicts with a
 * signature attached to the implementation contract. Public functions SHOULD always have the
 * 'proxyCallIfNotOwner' modifier unless there's some *really* good reason not to have that
 * modifier. And there almost certainly is not a good reason to not have that modifier. Beware!
 */
contract L1ChugSplashProxy {
    /*************
     * Constants *
     *************/
    // "Magic" prefix. When prepended to some arbitrary bytecode and used to create a contract, the
    // appended bytecode will be deployed as given.
    bytes13 constant internal DEPLOY_CODE_PREFIX = 0x600D380380600D6000396000f3;
    // bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
    bytes32 constant internal IMPLEMENTATION_KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    // bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
    bytes32 constant internal OWNER_KEY = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /***************
     * Constructor *
     ***************/
    
    /**
     * @param _owner Address of the initial contract owner.
     */
    constructor(
        address _owner
    ) {
        _setOwner(_owner);
    }
    /**********************
     * Function Modifiers *
     **********************/
    /**
     * Blocks a function from being called when the parent signals that the system should be paused
     * via an isUpgrading function.
     */
    modifier onlyWhenNotPaused() {
        address owner = _getOwner();
        // We do a low-level call because there's no guarantee that the owner actually *is* an
        // L1ChugSplashDeployer contract and Solidity will throw errors if we do a normal call and
        // it turns out that it isn't the right type of contract.
        (bool success, bytes memory returndata) = owner.staticcall(
            abi.encodeWithSelector(
                iL1ChugSplashDeployer.isUpgrading.selector
            )
        );
        // If the call was unsuccessful then we assume that there's no "isUpgrading" method and we
        // can just continue as normal. We also expect that the return value is exactly 32 bytes
        // long. If this isn't the case then we can safely ignore the result.
        if (success && returndata.length == 32) {
            // Although the expected value is a *boolean*, it's safer to decode as a uint256 in the
            // case that the isUpgrading function returned something other than 0 or 1. But we only
            // really care about the case where this value is 0 (= false).
            uint256 ret = abi.decode(returndata, (uint256));
            require(
                ret == 0,
                "L1ChugSplashProxy: system is currently being upgraded"
            );
        }
        _;
    }
    /**
     * Makes a proxy call instead of triggering the given function when the caller is either the
     * owner or the zero address. Caller can only ever be the zero address if this function is
     * being called off-chain via eth_call, which is totally fine and can be convenient for
     * client-side tooling. Avoids situations where the proxy and implementation share a sighash
     * and the proxy function ends up being called instead of the implementation one.
     *
     * Note: msg.sender == address(0) can ONLY be triggered off-chain via eth_call. If there's a
     * way for someone to send a transaction with msg.sender == address(0) in any real context then
     * we have much bigger problems. Primary reason to include this additional allowed sender is
     * because the owner address can be changed dynamically and we do not want clients to have to
     * keep track of the current owner in order to make an eth_call that doesn't trigger the
     * proxied contract.
     */
    modifier proxyCallIfNotOwner() {
        if (msg.sender == _getOwner() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /*********************
     * Fallback Function *
     *********************/
    fallback()
        external
        payable
    {
        // Proxy call by default.
        _doProxyCall();
    }
    /********************
     * Public Functions *
     ********************/
    /**
     * Sets the code that should be running behind this proxy. Note that this scheme is a bit
     * different from the standard proxy scheme where one would typically deploy the code
     * separately and then set the implementation address. We're doing it this way because it gives
     * us a lot more freedom on the client side. Can only be triggered by the contract owner.
     * @param _code New contract code to run inside this contract.
     */
    function setCode(
        bytes memory _code
    )
        proxyCallIfNotOwner
        public
    {
        // Get the code hash of the current implementation.
        address implementation = _getImplementation();
        // If the code hash matches the new implementation then we return early.
        if (keccak256(_code) == _getAccountCodeHash(implementation)) {
            return;
        }
        // Create the deploycode by appending the magic prefix.
        bytes memory deploycode = abi.encodePacked(
            DEPLOY_CODE_PREFIX,
            _code
        );
        // Deploy the code and set the new implementation address.
        address newImplementation;
        assembly {
            newImplementation := create(0x0, add(deploycode, 0x20), mload(deploycode))
        }
        // Check that the code was actually deployed correctly. I'm not sure if you can ever
        // actually fail this check. Should only happen if the contract creation from above runs
        // out of gas but this parent execution thread does NOT run out of gas. Seems like we
        // should be doing this check anyway though.
        require(
            _getAccountCodeHash(newImplementation) == keccak256(_code),
            "L1ChugSplashProxy: code was not correctly deployed."
        );
        _setImplementation(newImplementation);
    }
    /**
     * Modifies some storage slot within the proxy contract. Gives us a lot of power to perform
     * upgrades in a more transparent way. Only callable by the owner.
     * @param _key Storage key to modify.
     * @param _value New value for the storage key.
     */
    function setStorage(
        bytes32 _key,
        bytes32 _value
    )
        proxyCallIfNotOwner
        public
    {
        assembly {
            sstore(_key, _value)
        }
    }
    /**
     * Changes the owner of the proxy contract. Only callable by the owner.
     * @param _owner New owner of the proxy contract.
     */
    function setOwner(
        address _owner
    )
        proxyCallIfNotOwner
        public
    {
        _setOwner(_owner);
    }
    /**
     * Queries the owner of the proxy contract. Can only be called by the owner OR by making an
     * eth_call and setting the "from" address to address(0).
     * @return Owner address.
     */
    function getOwner()
        proxyCallIfNotOwner
        public
        returns (
            address
        )
    {
        return _getOwner();
    }
    /**
     * Queries the implementation address. Can only be called by the owner OR by making an
     * eth_call and setting the "from" address to address(0).
     * @return Implementation address.
     */
    function getImplementation()
        proxyCallIfNotOwner
        public
        returns (
            address
        )
    {
        return _getImplementation();
    }
    /**********************
     * Internal Functions *
     **********************/
    /**
     * Sets the implementation address.
     * @param _implementation New implementation address.
     */
    function _setImplementation(
        address _implementation
    )
        internal
    {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
    }
    /**
     * Queries the implementation address.
     * @return Implementation address.
     */
    function _getImplementation()
        internal
        view
        returns (
            address
        )
    {
        address implementation;
        assembly {
            implementation := sload(IMPLEMENTATION_KEY)
        }
        return implementation;
    }
    /**
     * Changes the owner of the proxy contract.
     * @param _owner New owner of the proxy contract.
     */
    function _setOwner(
        address _owner
    )
        internal
    {
        assembly {
            sstore(OWNER_KEY, _owner)
        }
    }
    /**
     * Queries the owner of the proxy contract.
     * @return Owner address.
     */
    function _getOwner()
        internal
        view 
        returns (
            address
        )
    {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
    /**
     * Gets the code hash for a given account.
     * @param _account Address of the account to get a code hash for.
     * @return Code hash for the account.
     */
    function _getAccountCodeHash(
        address _account
    )
        internal
        view
        returns (
            bytes32
        )
    {
        bytes32 codeHash;
        assembly {
            codeHash := extcodehash(_account)
        }
        return codeHash;
    }
    /**
     * Performs the proxy call via a delegatecall.
     */
    function _doProxyCall()
        onlyWhenNotPaused
        internal
    {
        address implementation = _getImplementation();
        require(
            implementation != address(0),
            "L1ChugSplashProxy: implementation is not set yet"
        );
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), implementation, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/**
 * @title iL1ChugSplashDeployer
 */
interface iL1ChugSplashDeployer {
    function isUpgrading()
        external
        view
        returns (
            bool
        );
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title Proxy
 * @notice Proxy is a transparent proxy that passes through the call if the caller is the owner or
 *         if the caller is address(0), meaning that the call originated from an off-chain
 *         simulation.
 */
contract Proxy {
    /**
     * @notice The storage slot that holds the address of the implementation.
     *         bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice The storage slot that holds the address of the owner.
     *         bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice An event that is emitted each time the implementation is changed. This event is part
     *         of the EIP-1967 specification.
     *
     * @param implementation The address of the implementation contract
     */
    event Upgraded(address indexed implementation);
    /**
     * @notice An event that is emitted each time the owner is upgraded. This event is part of the
     *         EIP-1967 specification.
     *
     * @param previousAdmin The previous owner of the contract
     * @param newAdmin      The new owner of the contract
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @notice A modifier that reverts if not called by the owner or by address(0) to allow
     *         eth_call to interact with this proxy without needing to use low-level storage
     *         inspection. We assume that nobody is able to trigger calls from address(0) during
     *         normal EVM execution.
     */
    modifier proxyCallIfNotAdmin() {
        if (msg.sender == _getAdmin() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @notice Sets the initial admin during contract deployment. Admin address is stored at the
     *         EIP-1967 admin storage slot so that accidental storage collision with the
     *         implementation is not possible.
     *
     * @param _admin Address of the initial contract admin. Admin as the ability to access the
     *               transparent proxy interface.
     */
    constructor(address _admin) {
        _changeAdmin(_admin);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Set the implementation contract address. The code at the given address will execute
     *         when this contract is called.
     *
     * @param _implementation Address of the implementation contract.
     */
    function upgradeTo(address _implementation) public virtual proxyCallIfNotAdmin {
        _setImplementation(_implementation);
    }
    /**
     * @notice Set the implementation and call a function in a single transaction. Useful to ensure
     *         atomic execution of initialization-based upgrades.
     *
     * @param _implementation Address of the implementation contract.
     * @param _data           Calldata to delegatecall the new implementation with.
     */
    function upgradeToAndCall(address _implementation, bytes calldata _data)
        public
        payable
        virtual
        proxyCallIfNotAdmin
        returns (bytes memory)
    {
        _setImplementation(_implementation);
        (bool success, bytes memory returndata) = _implementation.delegatecall(_data);
        require(success, "Proxy: delegatecall to new implementation contract failed");
        return returndata;
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _admin New owner of the proxy contract.
     */
    function changeAdmin(address _admin) public virtual proxyCallIfNotAdmin {
        _changeAdmin(_admin);
    }
    /**
     * @notice Gets the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function admin() public virtual proxyCallIfNotAdmin returns (address) {
        return _getAdmin();
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function implementation() public virtual proxyCallIfNotAdmin returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
        emit Upgraded(_implementation);
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _admin New owner of the proxy contract.
     */
    function _changeAdmin(address _admin) internal {
        address previous = _getAdmin();
        assembly {
            sstore(OWNER_KEY, _admin)
        }
        emit AdminChanged(previous, _admin);
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal {
        address impl = _getImplementation();
        require(impl != address(0), "Proxy: implementation not initialized");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), impl, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address impl;
        assembly {
            impl := sload(IMPLEMENTATION_KEY)
        }
        return impl;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getAdmin() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/* External Imports */
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
 * @title Lib_AddressManager
 */
contract Lib_AddressManager is Ownable {
    /**********
     * Events *
     **********/
    event AddressSet(
        string indexed _name,
        address _newAddress,
        address _oldAddress
    );
    /*************
     * Variables *
     *************/
    mapping (bytes32 => address) private addresses;
    /********************
     * Public Functions *
     ********************/
    /**
     * Changes the address associated with a particular name.
     * @param _name String name to associate an address with.
     * @param _address Address to associate with the name.
     */
    function setAddress(
        string memory _name,
        address _address
    )
        external
        onlyOwner
    {
        bytes32 nameHash = _getNameHash(_name);
        address oldAddress = addresses[nameHash];
        addresses[nameHash] = _address;
        emit AddressSet(
            _name,
            _address,
            oldAddress
        );
    }
    /**
     * Retrieves the address associated with a given name.
     * @param _name Name to retrieve an address for.
     * @return Address associated with the given name.
     */
    function getAddress(
        string memory _name
    )
        external
        view
        returns (
            address
        )
    {
        return addresses[_getNameHash(_name)];
    }
    /**********************
     * Internal Functions *
     **********************/
    /**
     * Computes the hash of a name.
     * @param _name Name to compute a hash for.
     * @return Hash of the given name.
     */
    function _getNameHash(
        string memory _name
    )
        internal
        pure
        returns (
            bytes32
        )
    {
        return keccak256(abi.encodePacked(_name));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/* Library Imports */
import { Lib_AddressManager } from "./Lib_AddressManager.sol";
/**
 * @title Lib_ResolvedDelegateProxy
 */
contract Lib_ResolvedDelegateProxy {
    /*************
     * Variables *
     *************/
    // Using mappings to store fields to avoid overwriting storage slots in the
    // implementation contract. For example, instead of storing these fields at
    // storage slot `0` & `1`, they are stored at `keccak256(key + slot)`.
    // See: https://solidity.readthedocs.io/en/v0.7.0/internals/layout_in_storage.html
    // NOTE: Do not use this code in your own contract system.
    //      There is a known flaw in this contract, and we will remove it from the repository
    //      in the near future. Due to the very limited way that we are using it, this flaw is
    //      not an issue in our system.
    mapping (address => string) private implementationName;
    mapping (address => Lib_AddressManager) private addressManager;
    /***************
     * Constructor *
     ***************/
    /**
     * @param _libAddressManager Address of the Lib_AddressManager.
     * @param _implementationName implementationName of the contract to proxy to.
     */
    constructor(
        address _libAddressManager,
        string memory _implementationName
    ) {
        addressManager[address(this)] = Lib_AddressManager(_libAddressManager);
        implementationName[address(this)] = _implementationName;
    }
    /*********************
     * Fallback Function *
     *********************/
    fallback()
        external
        payable
    {
        address target = addressManager[address(this)].getAddress(
            (implementationName[address(this)])
        );
        require(
            target != address(0),
            "Target address must be initialized."
        );
        (bool success, bytes memory returndata) = target.delegatecall(msg.data);
        if (success == true) {
            assembly {
                return(add(returndata, 0x20), mload(returndata))
            }
        } else {
            assembly {
                revert(add(returndata, 0x20), mload(returndata))
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
 * @custom:legacy
 * @title AddressManager
 * @notice AddressManager is a legacy contract that was used in the old version of the Optimism
 *         system to manage a registry of string names to addresses. We now use a more standard
 *         proxy system instead, but this contract is still necessary for backwards compatibility
 *         with several older contracts.
 */
contract AddressManager is Ownable {
    /**
     * @notice Mapping of the hashes of string names to addresses.
     */
    mapping(bytes32 => address) private addresses;
    /**
     * @notice Emitted when an address is modified in the registry.
     *
     * @param name       String name being set in the registry.
     * @param newAddress Address set for the given name.
     * @param oldAddress Address that was previously set for the given name.
     */
    event AddressSet(string indexed name, address newAddress, address oldAddress);
    /**
     * @notice Changes the address associated with a particular name.
     *
     * @param _name    String name to associate an address with.
     * @param _address Address to associate with the name.
     */
    function setAddress(string memory _name, address _address) external onlyOwner {
        bytes32 nameHash = _getNameHash(_name);
        address oldAddress = addresses[nameHash];
        addresses[nameHash] = _address;
        emit AddressSet(_name, _address, oldAddress);
    }
    /**
     * @notice Retrieves the address associated with a given name.
     *
     * @param _name Name to retrieve an address for.
     *
     * @return Address associated with the given name.
     */
    function getAddress(string memory _name) external view returns (address) {
        return addresses[_getNameHash(_name)];
    }
    /**
     * @notice Computes the hash of a name.
     *
     * @param _name Name to compute a hash for.
     *
     * @return Hash of the given name.
     */
    function _getNameHash(string memory _name) internal pure returns (bytes32) {
        return keccak256(abi.encodePacked(_name));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title IL1ChugSplashDeployer
 */
interface IL1ChugSplashDeployer {
    function isUpgrading() external view returns (bool);
}
/**
 * @custom:legacy
 * @title L1ChugSplashProxy
 * @notice Basic ChugSplash proxy contract for L1. Very close to being a normal proxy but has added
 *         functions `setCode` and `setStorage` for changing the code or storage of the contract.
 *
 *         Note for future developers: do NOT make anything in this contract 'public' unless you
 *         know what you're doing. Anything public can potentially have a function signature that
 *         conflicts with a signature attached to the implementation contract. Public functions
 *         SHOULD always have the `proxyCallIfNotOwner` modifier unless there's some *really* good
 *         reason not to have that modifier. And there almost certainly is not a good reason to not
 *         have that modifier. Beware!
 */
contract L1ChugSplashProxy {
    /**
     * @notice "Magic" prefix. When prepended to some arbitrary bytecode and used to create a
     *         contract, the appended bytecode will be deployed as given.
     */
    bytes13 internal constant DEPLOY_CODE_PREFIX = 0x600D380380600D6000396000f3;
    /**
     * @notice bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice Blocks a function from being called when the parent signals that the system should
     *         be paused via an isUpgrading function.
     */
    modifier onlyWhenNotPaused() {
        address owner = _getOwner();
        // We do a low-level call because there's no guarantee that the owner actually *is* an
        // L1ChugSplashDeployer contract and Solidity will throw errors if we do a normal call and
        // it turns out that it isn't the right type of contract.
        (bool success, bytes memory returndata) = owner.staticcall(
            abi.encodeWithSelector(IL1ChugSplashDeployer.isUpgrading.selector)
        );
        // If the call was unsuccessful then we assume that there's no "isUpgrading" method and we
        // can just continue as normal. We also expect that the return value is exactly 32 bytes
        // long. If this isn't the case then we can safely ignore the result.
        if (success && returndata.length == 32) {
            // Although the expected value is a *boolean*, it's safer to decode as a uint256 in the
            // case that the isUpgrading function returned something other than 0 or 1. But we only
            // really care about the case where this value is 0 (= false).
            uint256 ret = abi.decode(returndata, (uint256));
            require(ret == 0, "L1ChugSplashProxy: system is currently being upgraded");
        }
        _;
    }
    /**
     * @notice Makes a proxy call instead of triggering the given function when the caller is
     *         either the owner or the zero address. Caller can only ever be the zero address if
     *         this function is being called off-chain via eth_call, which is totally fine and can
     *         be convenient for client-side tooling. Avoids situations where the proxy and
     *         implementation share a sighash and the proxy function ends up being called instead
     *         of the implementation one.
     *
     *         Note: msg.sender == address(0) can ONLY be triggered off-chain via eth_call. If
     *         there's a way for someone to send a transaction with msg.sender == address(0) in any
     *         real context then we have much bigger problems. Primary reason to include this
     *         additional allowed sender is because the owner address can be changed dynamically
     *         and we do not want clients to have to keep track of the current owner in order to
     *         make an eth_call that doesn't trigger the proxied contract.
     */
    // slither-disable-next-line incorrect-modifier
    modifier proxyCallIfNotOwner() {
        if (msg.sender == _getOwner() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @param _owner Address of the initial contract owner.
     */
    constructor(address _owner) {
        _setOwner(_owner);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Sets the code that should be running behind this proxy.
     *
     *         Note: This scheme is a bit different from the standard proxy scheme where one would
     *         typically deploy the code separately and then set the implementation address. We're
     *         doing it this way because it gives us a lot more freedom on the client side. Can
     *         only be triggered by the contract owner.
     *
     * @param _code New contract code to run inside this contract.
     */
    function setCode(bytes memory _code) external proxyCallIfNotOwner {
        // Get the code hash of the current implementation.
        address implementation = _getImplementation();
        // If the code hash matches the new implementation then we return early.
        if (keccak256(_code) == _getAccountCodeHash(implementation)) {
            return;
        }
        // Create the deploycode by appending the magic prefix.
        bytes memory deploycode = abi.encodePacked(DEPLOY_CODE_PREFIX, _code);
        // Deploy the code and set the new implementation address.
        address newImplementation;
        assembly {
            newImplementation := create(0x0, add(deploycode, 0x20), mload(deploycode))
        }
        // Check that the code was actually deployed correctly. I'm not sure if you can ever
        // actually fail this check. Should only happen if the contract creation from above runs
        // out of gas but this parent execution thread does NOT run out of gas. Seems like we
        // should be doing this check anyway though.
        require(
            _getAccountCodeHash(newImplementation) == keccak256(_code),
            "L1ChugSplashProxy: code was not correctly deployed"
        );
        _setImplementation(newImplementation);
    }
    /**
     * @notice Modifies some storage slot within the proxy contract. Gives us a lot of power to
     *         perform upgrades in a more transparent way. Only callable by the owner.
     *
     * @param _key   Storage key to modify.
     * @param _value New value for the storage key.
     */
    function setStorage(bytes32 _key, bytes32 _value) external proxyCallIfNotOwner {
        assembly {
            sstore(_key, _value)
        }
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _owner New owner of the proxy contract.
     */
    function setOwner(address _owner) external proxyCallIfNotOwner {
        _setOwner(_owner);
    }
    /**
     * @notice Queries the owner of the proxy contract. Can only be called by the owner OR by
     *         making an eth_call and setting the "from" address to address(0).
     *
     * @return Owner address.
     */
    function getOwner() external proxyCallIfNotOwner returns (address) {
        return _getOwner();
    }
    /**
     * @notice Queries the implementation address. Can only be called by the owner OR by making an
     *         eth_call and setting the "from" address to address(0).
     *
     * @return Implementation address.
     */
    function getImplementation() external proxyCallIfNotOwner returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _owner New owner of the proxy contract.
     */
    function _setOwner(address _owner) internal {
        assembly {
            sstore(OWNER_KEY, _owner)
        }
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal onlyWhenNotPaused {
        address implementation = _getImplementation();
        require(implementation != address(0), "L1ChugSplashProxy: implementation is not set yet");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), implementation, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address implementation;
        assembly {
            implementation := sload(IMPLEMENTATION_KEY)
        }
        return implementation;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getOwner() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
    /**
     * @notice Gets the code hash for a given account.
     *
     * @param _account Address of the account to get a code hash for.
     *
     * @return Code hash for the account.
     */
    function _getAccountCodeHash(address _account) internal view returns (bytes32) {
        bytes32 codeHash;
        assembly {
            codeHash := extcodehash(_account)
        }
        return codeHash;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title Proxy
 * @notice Proxy is a transparent proxy that passes through the call if the caller is the owner or
 *         if the caller is address(0), meaning that the call originated from an off-chain
 *         simulation.
 */
contract Proxy {
    /**
     * @notice The storage slot that holds the address of the implementation.
     *         bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice The storage slot that holds the address of the owner.
     *         bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice An event that is emitted each time the implementation is changed. This event is part
     *         of the EIP-1967 specification.
     *
     * @param implementation The address of the implementation contract
     */
    event Upgraded(address indexed implementation);
    /**
     * @notice An event that is emitted each time the owner is upgraded. This event is part of the
     *         EIP-1967 specification.
     *
     * @param previousAdmin The previous owner of the contract
     * @param newAdmin      The new owner of the contract
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @notice A modifier that reverts if not called by the owner or by address(0) to allow
     *         eth_call to interact with this proxy without needing to use low-level storage
     *         inspection. We assume that nobody is able to trigger calls from address(0) during
     *         normal EVM execution.
     */
    modifier proxyCallIfNotAdmin() {
        if (msg.sender == _getAdmin() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @notice Sets the initial admin during contract deployment. Admin address is stored at the
     *         EIP-1967 admin storage slot so that accidental storage collision with the
     *         implementation is not possible.
     *
     * @param _admin Address of the initial contract admin. Admin as the ability to access the
     *               transparent proxy interface.
     */
    constructor(address _admin) {
        _changeAdmin(_admin);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Set the implementation contract address. The code at the given address will execute
     *         when this contract is called.
     *
     * @param _implementation Address of the implementation contract.
     */
    function upgradeTo(address _implementation) public virtual proxyCallIfNotAdmin {
        _setImplementation(_implementation);
    }
    /**
     * @notice Set the implementation and call a function in a single transaction. Useful to ensure
     *         atomic execution of initialization-based upgrades.
     *
     * @param _implementation Address of the implementation contract.
     * @param _data           Calldata to delegatecall the new implementation with.
     */
    function upgradeToAndCall(address _implementation, bytes calldata _data)
        public
        payable
        virtual
        proxyCallIfNotAdmin
        returns (bytes memory)
    {
        _setImplementation(_implementation);
        (bool success, bytes memory returndata) = _implementation.delegatecall(_data);
        require(success, "Proxy: delegatecall to new implementation contract failed");
        return returndata;
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _admin New owner of the proxy contract.
     */
    function changeAdmin(address _admin) public virtual proxyCallIfNotAdmin {
        _changeAdmin(_admin);
    }
    /**
     * @notice Gets the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function admin() public virtual proxyCallIfNotAdmin returns (address) {
        return _getAdmin();
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function implementation() public virtual proxyCallIfNotAdmin returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
        emit Upgraded(_implementation);
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _admin New owner of the proxy contract.
     */
    function _changeAdmin(address _admin) internal {
        address previous = _getAdmin();
        assembly {
            sstore(OWNER_KEY, _admin)
        }
        emit AdminChanged(previous, _admin);
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal {
        address impl = _getImplementation();
        require(impl != address(0), "Proxy: implementation not initialized");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), impl, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address impl;
        assembly {
            impl := sload(IMPLEMENTATION_KEY)
        }
        return impl;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getAdmin() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { Proxy } from "./Proxy.sol";
import { AddressManager } from "../legacy/AddressManager.sol";
import { L1ChugSplashProxy } from "../legacy/L1ChugSplashProxy.sol";
/**
 * @title IStaticERC1967Proxy
 * @notice IStaticERC1967Proxy is a static version of the ERC1967 proxy interface.
 */
interface IStaticERC1967Proxy {
    function implementation() external view returns (address);
    function admin() external view returns (address);
}
/**
 * @title IStaticL1ChugSplashProxy
 * @notice IStaticL1ChugSplashProxy is a static version of the ChugSplash proxy interface.
 */
interface IStaticL1ChugSplashProxy {
    function getImplementation() external view returns (address);
    function getOwner() external view returns (address);
}
/**
 * @title ProxyAdmin
 * @notice This is an auxiliary contract meant to be assigned as the admin of an ERC1967 Proxy,
 *         based on the OpenZeppelin implementation. It has backwards compatibility logic to work
 *         with the various types of proxies that have been deployed by Optimism in the past.
 */
contract ProxyAdmin is Ownable {
    /**
     * @notice The proxy types that the ProxyAdmin can manage.
     *
     * @custom:value ERC1967    Represents an ERC1967 compliant transparent proxy interface.
     * @custom:value CHUGSPLASH Represents the Chugsplash proxy interface (legacy).
     * @custom:value RESOLVED   Represents the ResolvedDelegate proxy (legacy).
     */
    enum ProxyType {
        ERC1967,
        CHUGSPLASH,
        RESOLVED
    }
    /**
     * @notice A mapping of proxy types, used for backwards compatibility.
     */
    mapping(address => ProxyType) public proxyType;
    /**
     * @notice A reverse mapping of addresses to names held in the AddressManager. This must be
     *         manually kept up to date with changes in the AddressManager for this contract
     *         to be able to work as an admin for the ResolvedDelegateProxy type.
     */
    mapping(address => string) public implementationName;
    /**
     * @notice The address of the address manager, this is required to manage the
     *         ResolvedDelegateProxy type.
     */
    AddressManager public addressManager;
    /**
     * @notice A legacy upgrading indicator used by the old Chugsplash Proxy.
     */
    bool internal upgrading;
    /**
     * @param _owner Address of the initial owner of this contract.
     */
    constructor(address _owner) Ownable() {
        _transferOwnership(_owner);
    }
    /**
     * @notice Sets the proxy type for a given address. Only required for non-standard (legacy)
     *         proxy types.
     *
     * @param _address Address of the proxy.
     * @param _type    Type of the proxy.
     */
    function setProxyType(address _address, ProxyType _type) external onlyOwner {
        proxyType[_address] = _type;
    }
    /**
     * @notice Sets the implementation name for a given address. Only required for
     *         ResolvedDelegateProxy type proxies that have an implementation name.
     *
     * @param _address Address of the ResolvedDelegateProxy.
     * @param _name    Name of the implementation for the proxy.
     */
    function setImplementationName(address _address, string memory _name) external onlyOwner {
        implementationName[_address] = _name;
    }
    /**
     * @notice Set the address of the AddressManager. This is required to manage legacy
     *         ResolvedDelegateProxy type proxy contracts.
     *
     * @param _address Address of the AddressManager.
     */
    function setAddressManager(AddressManager _address) external onlyOwner {
        addressManager = _address;
    }
    /**
     * @custom:legacy
     * @notice Set an address in the address manager. Since only the owner of the AddressManager
     *         can directly modify addresses and the ProxyAdmin will own the AddressManager, this
     *         gives the owner of the ProxyAdmin the ability to modify addresses directly.
     *
     * @param _name    Name to set within the AddressManager.
     * @param _address Address to attach to the given name.
     */
    function setAddress(string memory _name, address _address) external onlyOwner {
        addressManager.setAddress(_name, _address);
    }
    /**
     * @custom:legacy
     * @notice Set the upgrading status for the Chugsplash proxy type.
     *
     * @param _upgrading Whether or not the system is upgrading.
     */
    function setUpgrading(bool _upgrading) external onlyOwner {
        upgrading = _upgrading;
    }
    /**
     * @custom:legacy
     * @notice Legacy function used to tell ChugSplashProxy contracts if an upgrade is happening.
     *
     * @return Whether or not there is an upgrade going on. May not actually tell you whether an
     *         upgrade is going on, since we don't currently plan to use this variable for anything
     *         other than a legacy indicator to fix a UX bug in the ChugSplash proxy.
     */
    function isUpgrading() external view returns (bool) {
        return upgrading;
    }
    /**
     * @notice Returns the implementation of the given proxy address.
     *
     * @param _proxy Address of the proxy to get the implementation of.
     *
     * @return Address of the implementation of the proxy.
     */
    function getProxyImplementation(address _proxy) external view returns (address) {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            return IStaticERC1967Proxy(_proxy).implementation();
        } else if (ptype == ProxyType.CHUGSPLASH) {
            return IStaticL1ChugSplashProxy(_proxy).getImplementation();
        } else if (ptype == ProxyType.RESOLVED) {
            return addressManager.getAddress(implementationName[_proxy]);
        } else {
            revert("ProxyAdmin: unknown proxy type");
        }
    }
    /**
     * @notice Returns the admin of the given proxy address.
     *
     * @param _proxy Address of the proxy to get the admin of.
     *
     * @return Address of the admin of the proxy.
     */
    function getProxyAdmin(address payable _proxy) external view returns (address) {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            return IStaticERC1967Proxy(_proxy).admin();
        } else if (ptype == ProxyType.CHUGSPLASH) {
            return IStaticL1ChugSplashProxy(_proxy).getOwner();
        } else if (ptype == ProxyType.RESOLVED) {
            return addressManager.owner();
        } else {
            revert("ProxyAdmin: unknown proxy type");
        }
    }
    /**
     * @notice Updates the admin of the given proxy address.
     *
     * @param _proxy    Address of the proxy to update.
     * @param _newAdmin Address of the new proxy admin.
     */
    function changeProxyAdmin(address payable _proxy, address _newAdmin) external onlyOwner {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            Proxy(_proxy).changeAdmin(_newAdmin);
        } else if (ptype == ProxyType.CHUGSPLASH) {
            L1ChugSplashProxy(_proxy).setOwner(_newAdmin);
        } else if (ptype == ProxyType.RESOLVED) {
            addressManager.transferOwnership(_newAdmin);
        } else {
            revert("ProxyAdmin: unknown proxy type");
        }
    }
    /**
     * @notice Changes a proxy's implementation contract.
     *
     * @param _proxy          Address of the proxy to upgrade.
     * @param _implementation Address of the new implementation address.
     */
    function upgrade(address payable _proxy, address _implementation) public onlyOwner {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            Proxy(_proxy).upgradeTo(_implementation);
        } else if (ptype == ProxyType.CHUGSPLASH) {
            L1ChugSplashProxy(_proxy).setStorage(
                // bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
                0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc,
                bytes32(uint256(uint160(_implementation)))
            );
        } else if (ptype == ProxyType.RESOLVED) {
            string memory name = implementationName[_proxy];
            addressManager.setAddress(name, _implementation);
        } else {
            // It should not be possible to retrieve a ProxyType value which is not matched by
            // one of the previous conditions.
            assert(false);
        }
    }
    /**
     * @notice Changes a proxy's implementation contract and delegatecalls the new implementation
     *         with some given data. Useful for atomic upgrade-and-initialize calls.
     *
     * @param _proxy          Address of the proxy to upgrade.
     * @param _implementation Address of the new implementation address.
     * @param _data           Data to trigger the new implementation with.
     */
    function upgradeAndCall(
        address payable _proxy,
        address _implementation,
        bytes memory _data
    ) external payable onlyOwner {
        ProxyType ptype = proxyType[_proxy];
        if (ptype == ProxyType.ERC1967) {
            Proxy(_proxy).upgradeToAndCall{ value: msg.value }(_implementation, _data);
        } else {
            // reverts if proxy type is unknown
            upgrade(_proxy, _implementation);
            (bool success, ) = _proxy.call{ value: msg.value }(_data);
            require(success, "ProxyAdmin: call to proxy after upgrade failed");
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
// Contracts
import { StandardBridge } from "src/universal/StandardBridge.sol";
// Libraries
import { Predeploys } from "src/libraries/Predeploys.sol";
// Interfaces
import { ISemver } from "interfaces/universal/ISemver.sol";
import { ICrossDomainMessenger } from "interfaces/universal/ICrossDomainMessenger.sol";
import { ISuperchainConfig } from "interfaces/L1/ISuperchainConfig.sol";
/// @custom:proxied true
/// @title L1StandardBridge
/// @notice The L1StandardBridge is responsible for transfering ETH and ERC20 tokens between L1 and
///         L2. In the case that an ERC20 token is native to L1, it will be escrowed within this
///         contract. If the ERC20 token is native to L2, it will be burnt. Before Bedrock, ETH was
///         stored within this contract. After Bedrock, ETH is instead stored inside the
///         OptimismPortal contract.
///         NOTE: this contract is not intended to support all variations of ERC20 tokens. Examples
///         of some token types that may not be properly supported by this contract include, but are
///         not limited to: tokens with transfer fees, rebasing tokens, and tokens with blocklists.
contract L1StandardBridge is StandardBridge, ISemver {
    /// @custom:legacy
    /// @notice Emitted whenever a deposit of ETH from L1 into L2 is initiated.
    /// @param from      Address of the depositor.
    /// @param to        Address of the recipient on L2.
    /// @param amount    Amount of ETH deposited.
    /// @param extraData Extra data attached to the deposit.
    event ETHDepositInitiated(address indexed from, address indexed to, uint256 amount, bytes extraData);
    /// @custom:legacy
    /// @notice Emitted whenever a withdrawal of ETH from L2 to L1 is finalized.
    /// @param from      Address of the withdrawer.
    /// @param to        Address of the recipient on L1.
    /// @param amount    Amount of ETH withdrawn.
    /// @param extraData Extra data attached to the withdrawal.
    event ETHWithdrawalFinalized(address indexed from, address indexed to, uint256 amount, bytes extraData);
    /// @custom:legacy
    /// @notice Emitted whenever an ERC20 deposit is initiated.
    /// @param l1Token   Address of the token on L1.
    /// @param l2Token   Address of the corresponding token on L2.
    /// @param from      Address of the depositor.
    /// @param to        Address of the recipient on L2.
    /// @param amount    Amount of the ERC20 deposited.
    /// @param extraData Extra data attached to the deposit.
    event ERC20DepositInitiated(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );
    /// @custom:legacy
    /// @notice Emitted whenever an ERC20 withdrawal is finalized.
    /// @param l1Token   Address of the token on L1.
    /// @param l2Token   Address of the corresponding token on L2.
    /// @param from      Address of the withdrawer.
    /// @param to        Address of the recipient on L1.
    /// @param amount    Amount of the ERC20 withdrawn.
    /// @param extraData Extra data attached to the withdrawal.
    event ERC20WithdrawalFinalized(
        address indexed l1Token,
        address indexed l2Token,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );
    /// @notice Semantic version.
    /// @custom:semver 2.3.0
    string public constant version = "2.3.0";
    /// @notice Address of the SuperchainConfig contract.
    ISuperchainConfig public superchainConfig;
    /// @custom:legacy
    /// @custom:spacer systemConfig
    /// @notice Spacer taking up the legacy `systemConfig` slot.
    address private spacer_51_0_20;
    /// @notice Constructs the L1StandardBridge contract.
    constructor() StandardBridge() {
        _disableInitializers();
    }
    /// @notice Initializer.
    /// @param _messenger        Contract for the CrossDomainMessenger on this network.
    /// @param _superchainConfig Contract for the SuperchainConfig on this network.
    function initialize(ICrossDomainMessenger _messenger, ISuperchainConfig _superchainConfig) external initializer {
        superchainConfig = _superchainConfig;
        __StandardBridge_init({
            _messenger: _messenger,
            _otherBridge: StandardBridge(payable(Predeploys.L2_STANDARD_BRIDGE))
        });
    }
    /// @inheritdoc StandardBridge
    function paused() public view override returns (bool) {
        return superchainConfig.paused();
    }
    /// @notice Allows EOAs to bridge ETH by sending directly to the bridge.
    receive() external payable override onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, RECEIVE_DEFAULT_GAS_LIMIT, bytes(""));
    }
    /// @custom:legacy
    /// @notice Deposits some amount of ETH into the sender's account on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositETH(uint32 _minGasLimit, bytes calldata _extraData) external payable onlyEOA {
        _initiateETHDeposit(msg.sender, msg.sender, _minGasLimit, _extraData);
    }
    /// @custom:legacy
    /// @notice Deposits some amount of ETH into a target account on L2.
    ///         Note that if ETH is sent to a contract on L2 and the call fails, then that ETH will
    ///         be locked in the L2StandardBridge. ETH may be recoverable if the call can be
    ///         successfully replayed by increasing the amount of gas supplied to the call. If the
    ///         call will fail for any amount of gas, then the ETH will be locked permanently.
    /// @param _to          Address of the recipient on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositETHTo(address _to, uint32 _minGasLimit, bytes calldata _extraData) external payable {
        _initiateETHDeposit(msg.sender, _to, _minGasLimit, _extraData);
    }
    /// @custom:legacy
    /// @notice Deposits some amount of ERC20 tokens into the sender's account on L2.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositERC20(
        address _l1Token,
        address _l2Token,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        external
        virtual
        onlyEOA
    {
        _initiateERC20Deposit(_l1Token, _l2Token, msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }
    /// @custom:legacy
    /// @notice Deposits some amount of ERC20 tokens into a target account on L2.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _to          Address of the recipient on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    ///                     Data supplied here will not be used to execute any code on L2 and is
    ///                     only emitted as extra data for the convenience of off-chain tooling.
    function depositERC20To(
        address _l1Token,
        address _l2Token,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        external
        virtual
    {
        _initiateERC20Deposit(_l1Token, _l2Token, msg.sender, _to, _amount, _minGasLimit, _extraData);
    }
    /// @custom:legacy
    /// @notice Finalizes a withdrawal of ETH from L2.
    /// @param _from      Address of the withdrawer on L2.
    /// @param _to        Address of the recipient on L1.
    /// @param _amount    Amount of ETH to withdraw.
    /// @param _extraData Optional data forwarded from L2.
    function finalizeETHWithdrawal(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        external
        payable
    {
        finalizeBridgeETH(_from, _to, _amount, _extraData);
    }
    /// @custom:legacy
    /// @notice Finalizes a withdrawal of ERC20 tokens from L2.
    /// @param _l1Token   Address of the token on L1.
    /// @param _l2Token   Address of the corresponding token on L2.
    /// @param _from      Address of the withdrawer on L2.
    /// @param _to        Address of the recipient on L1.
    /// @param _amount    Amount of the ERC20 to withdraw.
    /// @param _extraData Optional data forwarded from L2.
    function finalizeERC20Withdrawal(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        external
    {
        finalizeBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _extraData);
    }
    /// @custom:legacy
    /// @notice Retrieves the access of the corresponding L2 bridge contract.
    /// @return Address of the corresponding L2 bridge contract.
    function l2TokenBridge() external view returns (address) {
        return address(otherBridge);
    }
    /// @notice Internal function for initiating an ETH deposit.
    /// @param _from        Address of the sender on L1.
    /// @param _to          Address of the recipient on L2.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    function _initiateETHDeposit(address _from, address _to, uint32 _minGasLimit, bytes memory _extraData) internal {
        _initiateBridgeETH(_from, _to, msg.value, _minGasLimit, _extraData);
    }
    /// @notice Internal function for initiating an ERC20 deposit.
    /// @param _l1Token     Address of the L1 token being deposited.
    /// @param _l2Token     Address of the corresponding token on L2.
    /// @param _from        Address of the sender on L1.
    /// @param _to          Address of the recipient on L2.
    /// @param _amount      Amount of the ERC20 to deposit.
    /// @param _minGasLimit Minimum gas limit for the deposit message on L2.
    /// @param _extraData   Optional data to forward to L2.
    function _initiateERC20Deposit(
        address _l1Token,
        address _l2Token,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        _initiateBridgeERC20(_l1Token, _l2Token, _from, _to, _amount, _minGasLimit, _extraData);
    }
    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ETHDepositInitiated event followed by the ETHBridgeInitiated event.
    ///         This is necessary for backwards compatibility with the legacy bridge.
    function _emitETHBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ETHDepositInitiated(_from, _to, _amount, _extraData);
        super._emitETHBridgeInitiated(_from, _to, _amount, _extraData);
    }
    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20DepositInitiated event followed by the ERC20BridgeInitiated
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitETHBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ETHWithdrawalFinalized(_from, _to, _amount, _extraData);
        super._emitETHBridgeFinalized(_from, _to, _amount, _extraData);
    }
    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitERC20BridgeInitiated(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ERC20DepositInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
    /// @inheritdoc StandardBridge
    /// @notice Emits the legacy ERC20WithdrawalFinalized event followed by the ERC20BridgeFinalized
    ///         event. This is necessary for backwards compatibility with the legacy bridge.
    function _emitERC20BridgeFinalized(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        override
    {
        emit ERC20WithdrawalFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        super._emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
// Contracts
import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
// Libraries
import { ERC165Checker } from "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { SafeCall } from "src/libraries/SafeCall.sol";
import { EOA } from "src/libraries/EOA.sol";
// Interfaces
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IOptimismMintableERC20 } from "interfaces/universal/IOptimismMintableERC20.sol";
import { ILegacyMintableERC20 } from "interfaces/legacy/ILegacyMintableERC20.sol";
import { ICrossDomainMessenger } from "interfaces/universal/ICrossDomainMessenger.sol";
/// @custom:upgradeable
/// @title StandardBridge
/// @notice StandardBridge is a base contract for the L1 and L2 standard ERC20 bridges. It handles
///         the core bridging logic, including escrowing tokens that are native to the local chain
///         and minting/burning tokens that are native to the remote chain.
abstract contract StandardBridge is Initializable {
    using SafeERC20 for IERC20;
    /// @notice The L2 gas limit set when eth is depoisited using the receive() function.
    uint32 internal constant RECEIVE_DEFAULT_GAS_LIMIT = 200_000;
    /// @custom:legacy
    /// @custom:spacer messenger
    /// @notice Spacer for backwards compatibility.
    bytes30 private spacer_0_2_30;
    /// @custom:legacy
    /// @custom:spacer l2TokenBridge
    /// @notice Spacer for backwards compatibility.
    address private spacer_1_0_20;
    /// @notice Mapping that stores deposits for a given pair of local and remote tokens.
    mapping(address => mapping(address => uint256)) public deposits;
    /// @notice Messenger contract on this domain.
    /// @custom:network-specific
    ICrossDomainMessenger public messenger;
    /// @notice Corresponding bridge on the other domain.
    /// @custom:network-specific
    StandardBridge public otherBridge;
    /// @notice Reserve extra slots (to a total of 50) in the storage layout for future upgrades.
    ///         A gap size of 45 was chosen here, so that the first slot used in a child contract
    ///         would be a multiple of 50.
    uint256[45] private __gap;
    /// @notice Emitted when an ETH bridge is initiated to the other chain.
    /// @param from      Address of the sender.
    /// @param to        Address of the receiver.
    /// @param amount    Amount of ETH sent.
    /// @param extraData Extra data sent with the transaction.
    event ETHBridgeInitiated(address indexed from, address indexed to, uint256 amount, bytes extraData);
    /// @notice Emitted when an ETH bridge is finalized on this chain.
    /// @param from      Address of the sender.
    /// @param to        Address of the receiver.
    /// @param amount    Amount of ETH sent.
    /// @param extraData Extra data sent with the transaction.
    event ETHBridgeFinalized(address indexed from, address indexed to, uint256 amount, bytes extraData);
    /// @notice Emitted when an ERC20 bridge is initiated to the other chain.
    /// @param localToken  Address of the ERC20 on this chain.
    /// @param remoteToken Address of the ERC20 on the remote chain.
    /// @param from        Address of the sender.
    /// @param to          Address of the receiver.
    /// @param amount      Amount of the ERC20 sent.
    /// @param extraData   Extra data sent with the transaction.
    event ERC20BridgeInitiated(
        address indexed localToken,
        address indexed remoteToken,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );
    /// @notice Emitted when an ERC20 bridge is finalized on this chain.
    /// @param localToken  Address of the ERC20 on this chain.
    /// @param remoteToken Address of the ERC20 on the remote chain.
    /// @param from        Address of the sender.
    /// @param to          Address of the receiver.
    /// @param amount      Amount of the ERC20 sent.
    /// @param extraData   Extra data sent with the transaction.
    event ERC20BridgeFinalized(
        address indexed localToken,
        address indexed remoteToken,
        address indexed from,
        address to,
        uint256 amount,
        bytes extraData
    );
    /// @notice Only allow EOAs to call the functions. Note that this is not safe against contracts
    ///         calling code within their constructors, but also doesn't really matter since we're
    ///         just trying to prevent users accidentally depositing with smart contract wallets.
    modifier onlyEOA() {
        require(EOA.isSenderEOA(), "StandardBridge: function can only be called from an EOA");
        _;
    }
    /// @notice Ensures that the caller is a cross-chain message from the other bridge.
    modifier onlyOtherBridge() {
        require(
            msg.sender == address(messenger) && messenger.xDomainMessageSender() == address(otherBridge),
            "StandardBridge: function can only be called from the other bridge"
        );
        _;
    }
    /// @notice Initializer.
    /// @param _messenger   Contract for CrossDomainMessenger on this network.
    /// @param _otherBridge Contract for the other StandardBridge contract.
    function __StandardBridge_init(
        ICrossDomainMessenger _messenger,
        StandardBridge _otherBridge
    )
        internal
        onlyInitializing
    {
        messenger = _messenger;
        otherBridge = _otherBridge;
    }
    /// @notice Allows EOAs to bridge ETH by sending directly to the bridge.
    ///         Must be implemented by contracts that inherit.
    receive() external payable virtual;
    /// @notice Getter for messenger contract.
    ///         Public getter is legacy and will be removed in the future. Use `messenger` instead.
    /// @return Contract of the messenger on this domain.
    /// @custom:legacy
    function MESSENGER() external view returns (ICrossDomainMessenger) {
        return messenger;
    }
    /// @notice Getter for the other bridge contract.
    ///         Public getter is legacy and will be removed in the future. Use `otherBridge` instead.
    /// @return Contract of the bridge on the other network.
    /// @custom:legacy
    function OTHER_BRIDGE() external view returns (StandardBridge) {
        return otherBridge;
    }
    /// @notice This function should return true if the contract is paused.
    ///         On L1 this function will check the SuperchainConfig for its paused status.
    ///         On L2 this function should be a no-op.
    /// @return Whether or not the contract is paused.
    function paused() public view virtual returns (bool) {
        return false;
    }
    /// @notice Sends ETH to the sender's address on the other chain.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeETH(uint32 _minGasLimit, bytes calldata _extraData) public payable onlyEOA {
        _initiateBridgeETH(msg.sender, msg.sender, msg.value, _minGasLimit, _extraData);
    }
    /// @notice Sends ETH to a receiver's address on the other chain. Note that if ETH is sent to a
    ///         smart contract and the call fails, the ETH will be temporarily locked in the
    ///         StandardBridge on the other chain until the call is replayed. If the call cannot be
    ///         replayed with any amount of gas (call always reverts), then the ETH will be
    ///         permanently locked in the StandardBridge on the other chain. ETH will also
    ///         be locked if the receiver is the other bridge, because finalizeBridgeETH will revert
    ///         in that case.
    /// @param _to          Address of the receiver.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeETHTo(address _to, uint32 _minGasLimit, bytes calldata _extraData) public payable {
        _initiateBridgeETH(msg.sender, _to, msg.value, _minGasLimit, _extraData);
    }
    /// @notice Sends ERC20 tokens to the sender's address on the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _amount      Amount of local tokens to deposit.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeERC20(
        address _localToken,
        address _remoteToken,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        public
        virtual
        onlyEOA
    {
        _initiateBridgeERC20(_localToken, _remoteToken, msg.sender, msg.sender, _amount, _minGasLimit, _extraData);
    }
    /// @notice Sends ERC20 tokens to a receiver's address on the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of local tokens to deposit.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function bridgeERC20To(
        address _localToken,
        address _remoteToken,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes calldata _extraData
    )
        public
        virtual
    {
        _initiateBridgeERC20(_localToken, _remoteToken, msg.sender, _to, _amount, _minGasLimit, _extraData);
    }
    /// @notice Finalizes an ETH bridge on this chain. Can only be triggered by the other
    ///         StandardBridge contract on the remote chain.
    /// @param _from      Address of the sender.
    /// @param _to        Address of the receiver.
    /// @param _amount    Amount of ETH being bridged.
    /// @param _extraData Extra data to be sent with the transaction. Note that the recipient will
    ///                   not be triggered with this data, but it will be emitted and can be used
    ///                   to identify the transaction.
    function finalizeBridgeETH(
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        public
        payable
        onlyOtherBridge
    {
        require(paused() == false, "StandardBridge: paused");
        require(msg.value == _amount, "StandardBridge: amount sent does not match amount required");
        require(_to != address(this), "StandardBridge: cannot send to self");
        require(_to != address(messenger), "StandardBridge: cannot send to messenger");
        // Emit the correct events. By default this will be _amount, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitETHBridgeFinalized(_from, _to, _amount, _extraData);
        bool success = SafeCall.call(_to, gasleft(), _amount, hex"");
        require(success, "StandardBridge: ETH transfer failed");
    }
    /// @notice Finalizes an ERC20 bridge on this chain. Can only be triggered by the other
    ///         StandardBridge contract on the remote chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of the ERC20 being bridged.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function finalizeBridgeERC20(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes calldata _extraData
    )
        public
        onlyOtherBridge
    {
        require(paused() == false, "StandardBridge: paused");
        if (_isOptimismMintableERC20(_localToken)) {
            require(
                _isCorrectTokenPair(_localToken, _remoteToken),
                "StandardBridge: wrong remote token for Optimism Mintable ERC20 local token"
            );
            IOptimismMintableERC20(_localToken).mint(_to, _amount);
        } else {
            deposits[_localToken][_remoteToken] = deposits[_localToken][_remoteToken] - _amount;
            IERC20(_localToken).safeTransfer(_to, _amount);
        }
        // Emit the correct events. By default this will be ERC20BridgeFinalized, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
    /// @notice Initiates a bridge of ETH through the CrossDomainMessenger.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of ETH being bridged.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function _initiateBridgeETH(
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        require(msg.value == _amount, "StandardBridge: bridging ETH must include sufficient ETH value");
        // Emit the correct events. By default this will be _amount, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitETHBridgeInitiated(_from, _to, _amount, _extraData);
        messenger.sendMessage{ value: _amount }({
            _target: address(otherBridge),
            _message: abi.encodeWithSelector(this.finalizeBridgeETH.selector, _from, _to, _amount, _extraData),
            _minGasLimit: _minGasLimit
        });
    }
    /// @notice Sends ERC20 tokens to a receiver's address on the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the corresponding token on the remote chain.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of local tokens to deposit.
    /// @param _minGasLimit Minimum amount of gas that the bridge can be relayed with.
    /// @param _extraData   Extra data to be sent with the transaction. Note that the recipient will
    ///                     not be triggered with this data, but it will be emitted and can be used
    ///                     to identify the transaction.
    function _initiateBridgeERC20(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        uint32 _minGasLimit,
        bytes memory _extraData
    )
        internal
    {
        require(msg.value == 0, "StandardBridge: cannot send value");
        if (_isOptimismMintableERC20(_localToken)) {
            require(
                _isCorrectTokenPair(_localToken, _remoteToken),
                "StandardBridge: wrong remote token for Optimism Mintable ERC20 local token"
            );
            IOptimismMintableERC20(_localToken).burn(_from, _amount);
        } else {
            IERC20(_localToken).safeTransferFrom(_from, address(this), _amount);
            deposits[_localToken][_remoteToken] = deposits[_localToken][_remoteToken] + _amount;
        }
        // Emit the correct events. By default this will be ERC20BridgeInitiated, but child
        // contracts may override this function in order to emit legacy events as well.
        _emitERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
        messenger.sendMessage({
            _target: address(otherBridge),
            _message: abi.encodeWithSelector(
                this.finalizeBridgeERC20.selector,
                // Because this call will be executed on the remote chain, we reverse the order of
                // the remote and local token addresses relative to their order in the
                // finalizeBridgeERC20 function.
                _remoteToken,
                _localToken,
                _from,
                _to,
                _amount,
                _extraData
            ),
            _minGasLimit: _minGasLimit
        });
    }
    /// @notice Checks if a given address is an OptimismMintableERC20. Not perfect, but good enough.
    ///         Just the way we like it.
    /// @param _token Address of the token to check.
    /// @return True if the token is an OptimismMintableERC20.
    function _isOptimismMintableERC20(address _token) internal view returns (bool) {
        return ERC165Checker.supportsInterface(_token, type(ILegacyMintableERC20).interfaceId)
            || ERC165Checker.supportsInterface(_token, type(IOptimismMintableERC20).interfaceId);
    }
    /// @notice Checks if the "other token" is the correct pair token for the OptimismMintableERC20.
    ///         Calls can be saved in the future by combining this logic with
    ///         `_isOptimismMintableERC20`.
    /// @param _mintableToken OptimismMintableERC20 to check against.
    /// @param _otherToken    Pair token to check.
    /// @return True if the other token is the correct pair token for the OptimismMintableERC20.
    function _isCorrectTokenPair(address _mintableToken, address _otherToken) internal view returns (bool) {
        if (ERC165Checker.supportsInterface(_mintableToken, type(ILegacyMintableERC20).interfaceId)) {
            return _otherToken == ILegacyMintableERC20(_mintableToken).l1Token();
        } else {
            return _otherToken == IOptimismMintableERC20(_mintableToken).remoteToken();
        }
    }
    /// @notice Emits the ETHBridgeInitiated event and if necessary the appropriate legacy event
    ///         when an ETH bridge is finalized on this chain.
    /// @param _from      Address of the sender.
    /// @param _to        Address of the receiver.
    /// @param _amount    Amount of ETH sent.
    /// @param _extraData Extra data sent with the transaction.
    function _emitETHBridgeInitiated(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ETHBridgeInitiated(_from, _to, _amount, _extraData);
    }
    /// @notice Emits the ETHBridgeFinalized and if necessary the appropriate legacy event when an
    ///         ETH bridge is finalized on this chain.
    /// @param _from      Address of the sender.
    /// @param _to        Address of the receiver.
    /// @param _amount    Amount of ETH sent.
    /// @param _extraData Extra data sent with the transaction.
    function _emitETHBridgeFinalized(
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ETHBridgeFinalized(_from, _to, _amount, _extraData);
    }
    /// @notice Emits the ERC20BridgeInitiated event and if necessary the appropriate legacy
    ///         event when an ERC20 bridge is initiated to the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the ERC20 on the remote chain.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of the ERC20 sent.
    /// @param _extraData   Extra data sent with the transaction.
    function _emitERC20BridgeInitiated(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ERC20BridgeInitiated(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
    /// @notice Emits the ERC20BridgeFinalized event and if necessary the appropriate legacy
    ///         event when an ERC20 bridge is initiated to the other chain.
    /// @param _localToken  Address of the ERC20 on this chain.
    /// @param _remoteToken Address of the ERC20 on the remote chain.
    /// @param _from        Address of the sender.
    /// @param _to          Address of the receiver.
    /// @param _amount      Amount of the ERC20 sent.
    /// @param _extraData   Extra data sent with the transaction.
    function _emitERC20BridgeFinalized(
        address _localToken,
        address _remoteToken,
        address _from,
        address _to,
        uint256 _amount,
        bytes memory _extraData
    )
        internal
        virtual
    {
        emit ERC20BridgeFinalized(_localToken, _remoteToken, _from, _to, _amount, _extraData);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Predeploys
/// @notice Contains constant addresses for protocol contracts that are pre-deployed to the L2 system.
//          This excludes the preinstalls (non-protocol contracts).
library Predeploys {
    /// @notice Number of predeploy-namespace addresses reserved for protocol usage.
    uint256 internal constant PREDEPLOY_COUNT = 2048;
    /// @custom:legacy
    /// @notice Address of the LegacyMessagePasser predeploy. Deprecate. Use the updated
    ///         L2ToL1MessagePasser contract instead.
    address internal constant LEGACY_MESSAGE_PASSER = 0x4200000000000000000000000000000000000000;
    /// @custom:legacy
    /// @notice Address of the L1MessageSender predeploy. Deprecated. Use L2CrossDomainMessenger
    ///         or access tx.origin (or msg.sender) in a L1 to L2 transaction instead.
    ///         Not embedded into new OP-Stack chains.
    address internal constant L1_MESSAGE_SENDER = 0x4200000000000000000000000000000000000001;
    /// @custom:legacy
    /// @notice Address of the DeployerWhitelist predeploy. No longer active.
    address internal constant DEPLOYER_WHITELIST = 0x4200000000000000000000000000000000000002;
    /// @notice Address of the canonical WETH contract.
    address internal constant WETH = 0x4200000000000000000000000000000000000006;
    /// @notice Address of the L2CrossDomainMessenger predeploy.
    address internal constant L2_CROSS_DOMAIN_MESSENGER = 0x4200000000000000000000000000000000000007;
    /// @notice Address of the GasPriceOracle predeploy. Includes fee information
    ///         and helpers for computing the L1 portion of the transaction fee.
    address internal constant GAS_PRICE_ORACLE = 0x420000000000000000000000000000000000000F;
    /// @notice Address of the L2StandardBridge predeploy.
    address internal constant L2_STANDARD_BRIDGE = 0x4200000000000000000000000000000000000010;
    //// @notice Address of the SequencerFeeWallet predeploy.
    address internal constant SEQUENCER_FEE_WALLET = 0x4200000000000000000000000000000000000011;
    /// @notice Address of the OptimismMintableERC20Factory predeploy.
    address internal constant OPTIMISM_MINTABLE_ERC20_FACTORY = 0x4200000000000000000000000000000000000012;
    /// @custom:legacy
    /// @notice Address of the L1BlockNumber predeploy. Deprecated. Use the L1Block predeploy
    ///         instead, which exposes more information about the L1 state.
    address internal constant L1_BLOCK_NUMBER = 0x4200000000000000000000000000000000000013;
    /// @notice Address of the L2ERC721Bridge predeploy.
    address internal constant L2_ERC721_BRIDGE = 0x4200000000000000000000000000000000000014;
    /// @notice Address of the L1Block predeploy.
    address internal constant L1_BLOCK_ATTRIBUTES = 0x4200000000000000000000000000000000000015;
    /// @notice Address of the L2ToL1MessagePasser predeploy.
    address internal constant L2_TO_L1_MESSAGE_PASSER = 0x4200000000000000000000000000000000000016;
    /// @notice Address of the OptimismMintableERC721Factory predeploy.
    address internal constant OPTIMISM_MINTABLE_ERC721_FACTORY = 0x4200000000000000000000000000000000000017;
    /// @notice Address of the ProxyAdmin predeploy.
    address internal constant PROXY_ADMIN = 0x4200000000000000000000000000000000000018;
    /// @notice Address of the BaseFeeVault predeploy.
    address internal constant BASE_FEE_VAULT = 0x4200000000000000000000000000000000000019;
    /// @notice Address of the L1FeeVault predeploy.
    address internal constant L1_FEE_VAULT = 0x420000000000000000000000000000000000001A;
    /// @notice Address of the OperatorFeeVault predeploy.
    address internal constant OPERATOR_FEE_VAULT = 0x420000000000000000000000000000000000001b;
    /// @notice Address of the SchemaRegistry predeploy.
    address internal constant SCHEMA_REGISTRY = 0x4200000000000000000000000000000000000020;
    /// @notice Address of the EAS predeploy.
    address internal constant EAS = 0x4200000000000000000000000000000000000021;
    /// @notice Address of the GovernanceToken predeploy.
    address internal constant GOVERNANCE_TOKEN = 0x4200000000000000000000000000000000000042;
    /// @custom:legacy
    /// @notice Address of the LegacyERC20ETH predeploy. Deprecated. Balances are migrated to the
    ///         state trie as of the Bedrock upgrade. Contract has been locked and write functions
    ///         can no longer be accessed.
    address internal constant LEGACY_ERC20_ETH = 0xDeadDeAddeAddEAddeadDEaDDEAdDeaDDeAD0000;
    /// @notice Address of the CrossL2Inbox predeploy.
    address internal constant CROSS_L2_INBOX = 0x4200000000000000000000000000000000000022;
    /// @notice Address of the L2ToL2CrossDomainMessenger predeploy.
    address internal constant L2_TO_L2_CROSS_DOMAIN_MESSENGER = 0x4200000000000000000000000000000000000023;
    /// @notice Address of the SuperchainWETH predeploy.
    address internal constant SUPERCHAIN_WETH = 0x4200000000000000000000000000000000000024;
    /// @notice Address of the ETHLiquidity predeploy.
    address internal constant ETH_LIQUIDITY = 0x4200000000000000000000000000000000000025;
    /// @notice Address of the OptimismSuperchainERC20Factory predeploy.
    address internal constant OPTIMISM_SUPERCHAIN_ERC20_FACTORY = 0x4200000000000000000000000000000000000026;
    /// @notice Address of the OptimismSuperchainERC20Beacon predeploy.
    address internal constant OPTIMISM_SUPERCHAIN_ERC20_BEACON = 0x4200000000000000000000000000000000000027;
    // TODO: Precalculate the address of the implementation contract
    /// @notice Arbitrary address of the OptimismSuperchainERC20 implementation contract.
    address internal constant OPTIMISM_SUPERCHAIN_ERC20 = 0xB9415c6cA93bdC545D4c5177512FCC22EFa38F28;
    /// @notice Address of the SuperchainTokenBridge predeploy.
    address internal constant SUPERCHAIN_TOKEN_BRIDGE = 0x4200000000000000000000000000000000000028;
    /// @notice Returns the name of the predeploy at the given address.
    function getName(address _addr) internal pure returns (string memory out_) {
        require(isPredeployNamespace(_addr), "Predeploys: address must be a predeploy");
        if (_addr == LEGACY_MESSAGE_PASSER) return "LegacyMessagePasser";
        if (_addr == L1_MESSAGE_SENDER) return "L1MessageSender";
        if (_addr == DEPLOYER_WHITELIST) return "DeployerWhitelist";
        if (_addr == WETH) return "WETH";
        if (_addr == L2_CROSS_DOMAIN_MESSENGER) return "L2CrossDomainMessenger";
        if (_addr == GAS_PRICE_ORACLE) return "GasPriceOracle";
        if (_addr == L2_STANDARD_BRIDGE) return "L2StandardBridge";
        if (_addr == SEQUENCER_FEE_WALLET) return "SequencerFeeVault";
        if (_addr == OPTIMISM_MINTABLE_ERC20_FACTORY) return "OptimismMintableERC20Factory";
        if (_addr == L1_BLOCK_NUMBER) return "L1BlockNumber";
        if (_addr == L2_ERC721_BRIDGE) return "L2ERC721Bridge";
        if (_addr == L1_BLOCK_ATTRIBUTES) return "L1Block";
        if (_addr == L2_TO_L1_MESSAGE_PASSER) return "L2ToL1MessagePasser";
        if (_addr == OPTIMISM_MINTABLE_ERC721_FACTORY) return "OptimismMintableERC721Factory";
        if (_addr == PROXY_ADMIN) return "ProxyAdmin";
        if (_addr == BASE_FEE_VAULT) return "BaseFeeVault";
        if (_addr == L1_FEE_VAULT) return "L1FeeVault";
        if (_addr == OPERATOR_FEE_VAULT) return "OperatorFeeVault";
        if (_addr == SCHEMA_REGISTRY) return "SchemaRegistry";
        if (_addr == EAS) return "EAS";
        if (_addr == GOVERNANCE_TOKEN) return "GovernanceToken";
        if (_addr == LEGACY_ERC20_ETH) return "LegacyERC20ETH";
        if (_addr == CROSS_L2_INBOX) return "CrossL2Inbox";
        if (_addr == L2_TO_L2_CROSS_DOMAIN_MESSENGER) return "L2ToL2CrossDomainMessenger";
        if (_addr == SUPERCHAIN_WETH) return "SuperchainWETH";
        if (_addr == ETH_LIQUIDITY) return "ETHLiquidity";
        if (_addr == OPTIMISM_SUPERCHAIN_ERC20_FACTORY) return "OptimismSuperchainERC20Factory";
        if (_addr == OPTIMISM_SUPERCHAIN_ERC20_BEACON) return "OptimismSuperchainERC20Beacon";
        if (_addr == SUPERCHAIN_TOKEN_BRIDGE) return "SuperchainTokenBridge";
        revert("Predeploys: unnamed predeploy");
    }
    /// @notice Returns true if the predeploy is not proxied.
    function notProxied(address _addr) internal pure returns (bool) {
        return _addr == GOVERNANCE_TOKEN || _addr == WETH;
    }
    /// @notice Returns true if the address is a defined predeploy that is embedded into new OP-Stack chains.
    function isSupportedPredeploy(address _addr, bool _useInterop) internal pure returns (bool) {
        return _addr == LEGACY_MESSAGE_PASSER || _addr == DEPLOYER_WHITELIST || _addr == WETH
            || _addr == L2_CROSS_DOMAIN_MESSENGER || _addr == GAS_PRICE_ORACLE || _addr == L2_STANDARD_BRIDGE
            || _addr == SEQUENCER_FEE_WALLET || _addr == OPTIMISM_MINTABLE_ERC20_FACTORY || _addr == L1_BLOCK_NUMBER
            || _addr == L2_ERC721_BRIDGE || _addr == L1_BLOCK_ATTRIBUTES || _addr == L2_TO_L1_MESSAGE_PASSER
            || _addr == OPTIMISM_MINTABLE_ERC721_FACTORY || _addr == PROXY_ADMIN || _addr == BASE_FEE_VAULT
            || _addr == L1_FEE_VAULT || _addr == OPERATOR_FEE_VAULT || _addr == SCHEMA_REGISTRY || _addr == EAS
            || _addr == GOVERNANCE_TOKEN || (_useInterop && _addr == CROSS_L2_INBOX)
            || (_useInterop && _addr == L2_TO_L2_CROSS_DOMAIN_MESSENGER) || (_useInterop && _addr == SUPERCHAIN_WETH)
            || (_useInterop && _addr == ETH_LIQUIDITY) || (_useInterop && _addr == SUPERCHAIN_TOKEN_BRIDGE);
    }
    function isPredeployNamespace(address _addr) internal pure returns (bool) {
        return uint160(_addr) >> 11 == uint160(0x4200000000000000000000000000000000000000) >> 11;
    }
    /// @notice Function to compute the expected address of the predeploy implementation
    ///         in the genesis state.
    function predeployToCodeNamespace(address _addr) internal pure returns (address) {
        require(
            isPredeployNamespace(_addr), "Predeploys: can only derive code-namespace address for predeploy addresses"
        );
        return address(
            uint160(uint256(uint160(_addr)) & 0xffff | uint256(uint160(0xc0D3C0d3C0d3C0D3c0d3C0d3c0D3C0d3c0d30000)))
        );
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title ISemver
/// @notice ISemver is a simple contract for ensuring that contracts are
///         versioned using semantic versioning.
interface ISemver {
    /// @notice Getter for the semantic version of the contract. This is not
    ///         meant to be used onchain but instead meant to be used by offchain
    ///         tooling.
    /// @return Semver contract version as a string.
    function version() external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ICrossDomainMessenger {
    event FailedRelayedMessage(bytes32 indexed msgHash);
    event Initialized(uint8 version);
    event RelayedMessage(bytes32 indexed msgHash);
    event SentMessage(address indexed target, address sender, bytes message, uint256 messageNonce, uint256 gasLimit);
    event SentMessageExtension1(address indexed sender, uint256 value);
    function MESSAGE_VERSION() external view returns (uint16);
    function MIN_GAS_CALLDATA_OVERHEAD() external view returns (uint64);
    function MIN_GAS_DYNAMIC_OVERHEAD_DENOMINATOR() external view returns (uint64);
    function MIN_GAS_DYNAMIC_OVERHEAD_NUMERATOR() external view returns (uint64);
    function OTHER_MESSENGER() external view returns (ICrossDomainMessenger);
    function RELAY_CALL_OVERHEAD() external view returns (uint64);
    function RELAY_CONSTANT_OVERHEAD() external view returns (uint64);
    function RELAY_GAS_CHECK_BUFFER() external view returns (uint64);
    function RELAY_RESERVED_GAS() external view returns (uint64);
    function TX_BASE_GAS() external view returns (uint64);
    function FLOOR_CALLDATA_OVERHEAD() external view returns (uint64);
    function ENCODING_OVERHEAD() external view returns (uint64);
    function baseGas(bytes memory _message, uint32 _minGasLimit) external pure returns (uint64);
    function failedMessages(bytes32) external view returns (bool);
    function messageNonce() external view returns (uint256);
    function otherMessenger() external view returns (ICrossDomainMessenger);
    function paused() external view returns (bool);
    function relayMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _minGasLimit,
        bytes memory _message
    )
        external
        payable;
    function sendMessage(address _target, bytes memory _message, uint32 _minGasLimit) external payable;
    function successfulMessages(bytes32) external view returns (bool);
    function xDomainMessageSender() external view returns (address);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ISuperchainConfig {
    enum UpdateType {
        GUARDIAN
    }
    event ConfigUpdate(UpdateType indexed updateType, bytes data);
    event Initialized(uint8 version);
    event Paused(string identifier);
    event Unpaused();
    function GUARDIAN_SLOT() external view returns (bytes32);
    function PAUSED_SLOT() external view returns (bytes32);
    function guardian() external view returns (address guardian_);
    function initialize(address _guardian, bool _paused) external;
    function pause(string memory _identifier) external;
    function paused() external view returns (bool paused_);
    function unpause() external;
    function version() external view returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/Address.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.2) (utils/introspection/ERC165Checker.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
    /**
     * @dev Returns true if `account` supports the {IERC165} interface,
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            _supportsERC165Interface(account, type(IERC165).interfaceId) &&
            !_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
    }
    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
    }
    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
        internal
        view
        returns (bool[] memory)
    {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);
        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
            }
        }
        return interfaceIdsSupported;
    }
    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }
        // query support of each interface in _interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!_supportsERC165Interface(account, interfaceIds[i])) {
                return false;
            }
        }
        // all interfaces supported
        return true;
    }
    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     * Interface identification is specified in ERC-165.
     */
    function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
        // prepare call
        bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
        // perform static call
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly {
            success := staticcall(30000, account, add(encodedParams, 0x20), mload(encodedParams), 0x00, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0x00)
        }
        return success && returnSize >= 0x20 && returnValue > 0;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title SafeCall
/// @notice Perform low level safe calls
library SafeCall {
    /// @notice Performs a low level call without copying any returndata.
    /// @dev Passes no calldata to the call context.
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _gas, uint256 _value) internal returns (bool success_) {
        assembly {
            success_ :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    0, // inloc
                    0, // inlen
                    0, // outloc
                    0 // outlen
                )
        }
    }
    /// @notice Perform a low level call with all gas without copying any returndata
    /// @param _target   Address to call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _value) internal returns (bool success_) {
        success_ = send(_target, gasleft(), _value);
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(
        address _target,
        uint256 _gas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool success_)
    {
        assembly {
            success_ :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0, // outloc
                    0 // outlen
                )
        }
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, uint256 _value, bytes memory _calldata) internal returns (bool success_) {
        success_ = call({ _target: _target, _gas: gasleft(), _value: _value, _calldata: _calldata });
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, bytes memory _calldata) internal returns (bool success_) {
        success_ = call({ _target: _target, _gas: gasleft(), _value: 0, _calldata: _calldata });
    }
    /// @notice Helper function to determine if there is sufficient gas remaining within the context
    ///         to guarantee that the minimum gas requirement for a call will be met as well as
    ///         optionally reserving a specified amount of gas for after the call has concluded.
    /// @param _minGas      The minimum amount of gas that may be passed to the target context.
    /// @param _reservedGas Optional amount of gas to reserve for the caller after the execution
    ///                     of the target context.
    /// @return `true` if there is enough gas remaining to safely supply `_minGas` to the target
    ///         context as well as reserve `_reservedGas` for the caller after the execution of
    ///         the target context.
    /// @dev !!!!! FOOTGUN ALERT !!!!!
    ///      1.) The 40_000 base buffer is to account for the worst case of the dynamic cost of the
    ///          `CALL` opcode's `address_access_cost`, `positive_value_cost`, and
    ///          `value_to_empty_account_cost` factors with an added buffer of 5,700 gas. It is
    ///          still possible to self-rekt by initiating a withdrawal with a minimum gas limit
    ///          that does not account for the `memory_expansion_cost` & `code_execution_cost`
    ///          factors of the dynamic cost of the `CALL` opcode.
    ///      2.) This function should *directly* precede the external call if possible. There is an
    ///          added buffer to account for gas consumed between this check and the call, but it
    ///          is only 5,700 gas.
    ///      3.) Because EIP-150 ensures that a maximum of 63/64ths of the remaining gas in the call
    ///          frame may be passed to a subcontext, we need to ensure that the gas will not be
    ///          truncated.
    ///      4.) Use wisely. This function is not a silver bullet.
    function hasMinGas(uint256 _minGas, uint256 _reservedGas) internal view returns (bool) {
        bool _hasMinGas;
        assembly {
            // Equation: gas × 63 ≥ minGas × 64 + 63(40_000 + reservedGas)
            _hasMinGas := iszero(lt(mul(gas(), 63), add(mul(_minGas, 64), mul(add(40000, _reservedGas), 63))))
        }
        return _hasMinGas;
    }
    /// @notice Perform a low level call without copying any returndata. This function
    ///         will revert if the call cannot be performed with the specified minimum
    ///         gas.
    /// @param _target   Address to call
    /// @param _minGas   The minimum amount of gas that may be passed to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function callWithMinGas(
        address _target,
        uint256 _minGas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool)
    {
        bool _success;
        bool _hasMinGas = hasMinGas(_minGas, 0);
        assembly {
            // Assertion: gasleft() >= (_minGas * 64) / 63 + 40_000
            if iszero(_hasMinGas) {
                // Store the "Error(string)" selector in scratch space.
                mstore(0, 0x08c379a0)
                // Store the pointer to the string length in scratch space.
                mstore(32, 32)
                // Store the string.
                //
                // SAFETY:
                // - We pad the beginning of the string with two zero bytes as well as the
                // length (24) to ensure that we override the free memory pointer at offset
                // 0x40. This is necessary because the free memory pointer is likely to
                // be greater than 1 byte when this function is called, but it is incredibly
                // unlikely that it will be greater than 3 bytes. As for the data within
                // 0x60, it is ensured that it is 0 due to 0x60 being the zero offset.
                // - It's fine to clobber the free memory pointer, we're reverting.
                mstore(88, 0x0000185361666543616c6c3a204e6f7420656e6f75676820676173)
                // Revert with 'Error("SafeCall: Not enough gas")'
                revert(28, 100)
            }
            // The call will be supplied at least ((_minGas * 64) / 63) gas due to the
            // above assertion. This ensures that, in all circumstances (except for when the
            // `_minGas` does not account for the `memory_expansion_cost` and `code_execution_cost`
            // factors of the dynamic cost of the `CALL` opcode), the call will receive at least
            // the minimum amount of gas specified.
            _success :=
                call(
                    gas(), // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0x00, // outloc
                    0x00 // outlen
                )
        }
        return _success;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title EOA
/// @notice A library for detecting if an address is an EOA.
library EOA {
    /// @notice Returns true if sender address is an EOA.
    /// @return isEOA_ True if the sender address is an EOA.
    function isSenderEOA() internal view returns (bool isEOA_) {
        if (msg.sender == tx.origin) {
            isEOA_ = true;
        } else if (address(msg.sender).code.length == 23) {
            // If the sender is not the origin, check for 7702 delegated EOAs.
            assembly {
                let ptr := mload(0x40)
                mstore(0x40, add(ptr, 0x20))
                extcodecopy(caller(), ptr, 0, 0x20)
                isEOA_ := eq(shr(232, mload(ptr)), 0xEF0100)
            }
        } else {
            // If more or less than 23 bytes of code, not a 7702 delegated EOA.
            isEOA_ = false;
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/// @title IOptimismMintableERC20
/// @notice This interface is available on the OptimismMintableERC20 contract.
///         We declare it as a separate interface so that it can be used in
///         custom implementations of OptimismMintableERC20.
interface IOptimismMintableERC20 is IERC165 {
    function remoteToken() external view returns (address);
    function bridge() external returns (address);
    function mint(address _to, uint256 _amount) external;
    function burn(address _from, uint256 _amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/// @custom:legacy
/// @title ILegacyMintableERC20
/// @notice This interface was available on the legacy L2StandardERC20 contract.
///         It remains available on the OptimismMintableERC20 contract for
///         backwards compatibility.
interface ILegacyMintableERC20 is IERC165 {
    function l1Token() external view returns (address);
    function mint(address _to, uint256 _amount) external;
    function burn(address _from, uint256 _amount) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.8.0;
/* External Imports */
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
 * @title Lib_AddressManager
 */
contract Lib_AddressManager is Ownable {
    /**********
     * Events *
     **********/
    event AddressSet(
        string indexed _name,
        address _newAddress,
        address _oldAddress
    );
    /*************
     * Variables *
     *************/
    mapping (bytes32 => address) private addresses;
    /********************
     * Public Functions *
     ********************/
    /**
     * Changes the address associated with a particular name.
     * @param _name String name to associate an address with.
     * @param _address Address to associate with the name.
     */
    function setAddress(
        string memory _name,
        address _address
    )
        external
        onlyOwner
    {
        bytes32 nameHash = _getNameHash(_name);
        address oldAddress = addresses[nameHash];
        addresses[nameHash] = _address;
        emit AddressSet(
            _name,
            _address,
            oldAddress
        );
    }
    /**
     * Retrieves the address associated with a given name.
     * @param _name Name to retrieve an address for.
     * @return Address associated with the given name.
     */
    function getAddress(
        string memory _name
    )
        external
        view
        returns (
            address
        )
    {
        return addresses[_getNameHash(_name)];
    }
    /**********************
     * Internal Functions *
     **********************/
    /**
     * Computes the hash of a name.
     * @param _name Name to compute a hash for.
     * @return Hash of the given name.
     */
    function _getNameHash(
        string memory _name
    )
        internal
        pure
        returns (
            bytes32
        )
    {
        return keccak256(abi.encodePacked(_name));
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
// Contracts
import { CrossDomainMessenger } from "src/universal/CrossDomainMessenger.sol";
// Libraries
import { Predeploys } from "src/libraries/Predeploys.sol";
// Interfaces
import { ISemver } from "interfaces/universal/ISemver.sol";
import { ISuperchainConfig } from "interfaces/L1/ISuperchainConfig.sol";
import { IOptimismPortal2 as IOptimismPortal } from "interfaces/L1/IOptimismPortal2.sol";
/// @custom:proxied true
/// @title L1CrossDomainMessenger
/// @notice The L1CrossDomainMessenger is a message passing interface between L1 and L2 responsible
///         for sending and receiving data on the L1 side. Users are encouraged to use this
///         interface instead of interacting with lower-level contracts directly.
contract L1CrossDomainMessenger is CrossDomainMessenger, ISemver {
    /// @notice Contract of the SuperchainConfig.
    ISuperchainConfig public superchainConfig;
    /// @notice Contract of the OptimismPortal.
    /// @custom:network-specific
    IOptimismPortal public portal;
    /// @custom:legacy
    /// @custom:spacer systemConfig
    /// @notice Spacer taking up the legacy `systemConfig` slot.
    address private spacer_253_0_20;
    /// @notice Semantic version.
    /// @custom:semver 2.6.0
    string public constant version = "2.6.0";
    /// @notice Constructs the L1CrossDomainMessenger contract.
    constructor() {
        _disableInitializers();
    }
    /// @notice Initializes the contract.
    /// @param _superchainConfig Contract of the SuperchainConfig contract on this network.
    /// @param _portal Contract of the OptimismPortal contract on this network.
    function initialize(ISuperchainConfig _superchainConfig, IOptimismPortal _portal) external initializer {
        superchainConfig = _superchainConfig;
        portal = _portal;
        __CrossDomainMessenger_init({ _otherMessenger: CrossDomainMessenger(Predeploys.L2_CROSS_DOMAIN_MESSENGER) });
    }
    /// @notice Getter function for the OptimismPortal contract on this chain.
    ///         Public getter is legacy and will be removed in the future. Use `portal()` instead.
    /// @return Contract of the OptimismPortal on this chain.
    /// @custom:legacy
    function PORTAL() external view returns (IOptimismPortal) {
        return portal;
    }
    /// @inheritdoc CrossDomainMessenger
    function _sendMessage(address _to, uint64 _gasLimit, uint256 _value, bytes memory _data) internal override {
        portal.depositTransaction{ value: _value }({
            _to: _to,
            _value: _value,
            _gasLimit: _gasLimit,
            _isCreation: false,
            _data: _data
        });
    }
    /// @inheritdoc CrossDomainMessenger
    function _isOtherMessenger() internal view override returns (bool) {
        return msg.sender == address(portal) && portal.l2Sender() == address(otherMessenger);
    }
    /// @inheritdoc CrossDomainMessenger
    function _isUnsafeTarget(address _target) internal view override returns (bool) {
        return _target == address(this) || _target == address(portal);
    }
    /// @inheritdoc CrossDomainMessenger
    function paused() public view override returns (bool) {
        return superchainConfig.paused();
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
// Libraries
import { Initializable } from "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { SafeCall } from "src/libraries/SafeCall.sol";
import { Hashing } from "src/libraries/Hashing.sol";
import { Encoding } from "src/libraries/Encoding.sol";
import { Constants } from "src/libraries/Constants.sol";
/// @custom:legacy
/// @title CrossDomainMessengerLegacySpacer0
/// @notice Contract only exists to add a spacer to the CrossDomainMessenger where the
///         libAddressManager variable used to exist. Must be the first contract in the inheritance
///         tree of the CrossDomainMessenger.
contract CrossDomainMessengerLegacySpacer0 {
    /// @custom:legacy
    /// @custom:spacer libAddressManager
    /// @notice Spacer for backwards compatibility.
    address private spacer_0_0_20;
}
/// @custom:legacy
/// @title CrossDomainMessengerLegacySpacer1
/// @notice Contract only exists to add a spacer to the CrossDomainMessenger where the
///         PausableUpgradable and OwnableUpgradeable variables used to exist. Must be
///         the third contract in the inheritance tree of the CrossDomainMessenger.
contract CrossDomainMessengerLegacySpacer1 {
    /// @custom:legacy
    /// @custom:spacer ContextUpgradable's __gap
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         ContextUpgradable.
    uint256[50] private spacer_1_0_1600;
    /// @custom:legacy
    /// @custom:spacer OwnableUpgradeable's _owner
    /// @notice Spacer for backwards compatibility.
    ///         Come from OpenZeppelin OwnableUpgradeable.
    address private spacer_51_0_20;
    /// @custom:legacy
    /// @custom:spacer OwnableUpgradeable's __gap
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         OwnableUpgradeable.
    uint256[49] private spacer_52_0_1568;
    /// @custom:legacy
    /// @custom:spacer PausableUpgradable's _paused
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         PausableUpgradable.
    bool private spacer_101_0_1;
    /// @custom:legacy
    /// @custom:spacer PausableUpgradable's __gap
    /// @notice Spacer for backwards compatibility. Comes from OpenZeppelin
    ///         PausableUpgradable.
    uint256[49] private spacer_102_0_1568;
    /// @custom:legacy
    /// @custom:spacer ReentrancyGuardUpgradeable's `_status` field.
    /// @notice Spacer for backwards compatibility.
    uint256 private spacer_151_0_32;
    /// @custom:legacy
    /// @custom:spacer ReentrancyGuardUpgradeable's __gap
    /// @notice Spacer for backwards compatibility.
    uint256[49] private spacer_152_0_1568;
    /// @custom:legacy
    /// @custom:spacer blockedMessages
    /// @notice Spacer for backwards compatibility.
    mapping(bytes32 => bool) private spacer_201_0_32;
    /// @custom:legacy
    /// @custom:spacer relayedMessages
    /// @notice Spacer for backwards compatibility.
    mapping(bytes32 => bool) private spacer_202_0_32;
}
/// @custom:upgradeable
/// @title CrossDomainMessenger
/// @notice CrossDomainMessenger is a base contract that provides the core logic for the L1 and L2
///         cross-chain messenger contracts. It's designed to be a universal interface that only
///         needs to be extended slightly to provide low-level message passing functionality on each
///         chain it's deployed on. Currently only designed for message passing between two paired
///         chains and does not support one-to-many interactions.
///         Any changes to this contract MUST result in a semver bump for contracts that inherit it.
abstract contract CrossDomainMessenger is
    CrossDomainMessengerLegacySpacer0,
    Initializable,
    CrossDomainMessengerLegacySpacer1
{
    /// @notice Current message version identifier.
    uint16 public constant MESSAGE_VERSION = 1;
    /// @notice Constant overhead added to the base gas for a message.
    uint64 public constant RELAY_CONSTANT_OVERHEAD = 200_000;
    /// @notice Numerator for dynamic overhead added to the base gas for a message.
    uint64 public constant MIN_GAS_DYNAMIC_OVERHEAD_NUMERATOR = 64;
    /// @notice Denominator for dynamic overhead added to the base gas for a message.
    uint64 public constant MIN_GAS_DYNAMIC_OVERHEAD_DENOMINATOR = 63;
    /// @notice Extra gas added to base gas for each byte of calldata in a message.
    uint64 public constant MIN_GAS_CALLDATA_OVERHEAD = 16;
    /// @notice Gas reserved for performing the external call in `relayMessage`.
    uint64 public constant RELAY_CALL_OVERHEAD = 40_000;
    /// @notice Gas reserved for finalizing the execution of `relayMessage` after the safe call.
    uint64 public constant RELAY_RESERVED_GAS = 40_000;
    /// @notice Gas reserved for the execution between the `hasMinGas` check and the external
    ///         call in `relayMessage`.
    uint64 public constant RELAY_GAS_CHECK_BUFFER = 5_000;
    /// @notice Base gas required for any transaction in the EVM.
    uint64 public constant TX_BASE_GAS = 21_000;
    /// @notice Floor overhead per byte of non-zero calldata in a message. Calldata floor was
    ///         introduced in EIP-7623.
    uint64 public constant FLOOR_CALLDATA_OVERHEAD = 40;
    /// @notice Overhead added to the internal message data when the full call to relayMessage is
    ///         ABI encoded. This is a constant value that is specific to the V1 message encoding
    ///         scheme. 260 is an upper bound, actual overhead can be as low as 228 bytes for an
    ///         empty message.
    uint64 public constant ENCODING_OVERHEAD = 260;
    /// @notice Mapping of message hashes to boolean receipt values. Note that a message will only
    ///         be present in this mapping if it has successfully been relayed on this chain, and
    ///         can therefore not be relayed again.
    mapping(bytes32 => bool) public successfulMessages;
    /// @notice Address of the sender of the currently executing message on the other chain. If the
    ///         value of this variable is the default value (0x00000000...dead) then no message is
    ///         currently being executed. Use the xDomainMessageSender getter which will throw an
    ///         error if this is the case.
    address internal xDomainMsgSender;
    /// @notice Nonce for the next message to be sent, without the message version applied. Use the
    ///         messageNonce getter which will insert the message version into the nonce to give you
    ///         the actual nonce to be used for the message.
    uint240 internal msgNonce;
    /// @notice Mapping of message hashes to a boolean if and only if the message has failed to be
    ///         executed at least once. A message will not be present in this mapping if it
    ///         successfully executed on the first attempt.
    mapping(bytes32 => bool) public failedMessages;
    /// @notice CrossDomainMessenger contract on the other chain.
    /// @custom:network-specific
    CrossDomainMessenger public otherMessenger;
    /// @notice Reserve extra slots in the storage layout for future upgrades.
    ///         A gap size of 43 was chosen here, so that the first slot used in a child contract
    ///         would be 1 plus a multiple of 50.
    uint256[43] private __gap;
    /// @notice Emitted whenever a message is sent to the other chain.
    /// @param target       Address of the recipient of the message.
    /// @param sender       Address of the sender of the message.
    /// @param message      Message to trigger the recipient address with.
    /// @param messageNonce Unique nonce attached to the message.
    /// @param gasLimit     Minimum gas limit that the message can be executed with.
    event SentMessage(address indexed target, address sender, bytes message, uint256 messageNonce, uint256 gasLimit);
    /// @notice Additional event data to emit, required as of Bedrock. Cannot be merged with the
    ///         SentMessage event without breaking the ABI of this contract, this is good enough.
    /// @param sender Address of the sender of the message.
    /// @param value  ETH value sent along with the message to the recipient.
    event SentMessageExtension1(address indexed sender, uint256 value);
    /// @notice Emitted whenever a message is successfully relayed on this chain.
    /// @param msgHash Hash of the message that was relayed.
    event RelayedMessage(bytes32 indexed msgHash);
    /// @notice Emitted whenever a message fails to be relayed on this chain.
    /// @param msgHash Hash of the message that failed to be relayed.
    event FailedRelayedMessage(bytes32 indexed msgHash);
    /// @notice Sends a message to some target address on the other chain. Note that if the call
    ///         always reverts, then the message will be unrelayable, and any ETH sent will be
    ///         permanently locked. The same will occur if the target on the other chain is
    ///         considered unsafe (see the _isUnsafeTarget() function).
    /// @param _target      Target contract or wallet address.
    /// @param _message     Message to trigger the target address with.
    /// @param _minGasLimit Minimum gas limit that the message can be executed with.
    function sendMessage(address _target, bytes calldata _message, uint32 _minGasLimit) external payable {
        // Triggers a message to the other messenger. Note that the amount of gas provided to the
        // message is the amount of gas requested by the user PLUS the base gas value. We want to
        // guarantee the property that the call to the target contract will always have at least
        // the minimum gas limit specified by the user.
        _sendMessage({
            _to: address(otherMessenger),
            _gasLimit: baseGas(_message, _minGasLimit),
            _value: msg.value,
            _data: abi.encodeWithSelector(
                this.relayMessage.selector, messageNonce(), msg.sender, _target, msg.value, _minGasLimit, _message
            )
        });
        emit SentMessage(_target, msg.sender, _message, messageNonce(), _minGasLimit);
        emit SentMessageExtension1(msg.sender, msg.value);
        unchecked {
            ++msgNonce;
        }
    }
    /// @notice Relays a message that was sent by the other CrossDomainMessenger contract. Can only
    ///         be executed via cross-chain call from the other messenger OR if the message was
    ///         already received once and is currently being replayed.
    /// @param _nonce       Nonce of the message being relayed.
    /// @param _sender      Address of the user who sent the message.
    /// @param _target      Address that the message is targeted at.
    /// @param _value       ETH value to send with the message.
    /// @param _minGasLimit Minimum amount of gas that the message can be executed with.
    /// @param _message     Message to send to the target.
    function relayMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _minGasLimit,
        bytes calldata _message
    )
        external
        payable
    {
        // On L1 this function will check the Portal for its paused status.
        // On L2 this function should be a no-op, because paused will always return false.
        require(paused() == false, "CrossDomainMessenger: paused");
        (, uint16 version) = Encoding.decodeVersionedNonce(_nonce);
        require(version < 2, "CrossDomainMessenger: only version 0 or 1 messages are supported at this time");
        // If the message is version 0, then it's a migrated legacy withdrawal. We therefore need
        // to check that the legacy version of the message has not already been relayed.
        if (version == 0) {
            bytes32 oldHash = Hashing.hashCrossDomainMessageV0(_target, _sender, _message, _nonce);
            require(successfulMessages[oldHash] == false, "CrossDomainMessenger: legacy withdrawal already relayed");
        }
        // We use the v1 message hash as the unique identifier for the message because it commits
        // to the value and minimum gas limit of the message.
        bytes32 versionedHash =
            Hashing.hashCrossDomainMessageV1(_nonce, _sender, _target, _value, _minGasLimit, _message);
        if (_isOtherMessenger()) {
            // These properties should always hold when the message is first submitted (as
            // opposed to being replayed).
            assert(msg.value == _value);
            assert(!failedMessages[versionedHash]);
        } else {
            require(msg.value == 0, "CrossDomainMessenger: value must be zero unless message is from a system address");
            require(failedMessages[versionedHash], "CrossDomainMessenger: message cannot be replayed");
        }
        require(
            _isUnsafeTarget(_target) == false, "CrossDomainMessenger: cannot send message to blocked system address"
        );
        require(successfulMessages[versionedHash] == false, "CrossDomainMessenger: message has already been relayed");
        // If there is not enough gas left to perform the external call and finish the execution,
        // return early and assign the message to the failedMessages mapping.
        // We are asserting that we have enough gas to:
        // 1. Call the target contract (_minGasLimit + RELAY_CALL_OVERHEAD + RELAY_GAS_CHECK_BUFFER)
        //   1.a. The RELAY_CALL_OVERHEAD is included in `hasMinGas`.
        // 2. Finish the execution after the external call (RELAY_RESERVED_GAS).
        //
        // If `xDomainMsgSender` is not the default L2 sender, this function
        // is being re-entered. This marks the message as failed to allow it to be replayed.
        if (
            !SafeCall.hasMinGas(_minGasLimit, RELAY_RESERVED_GAS + RELAY_GAS_CHECK_BUFFER)
                || xDomainMsgSender != Constants.DEFAULT_L2_SENDER
        ) {
            failedMessages[versionedHash] = true;
            emit FailedRelayedMessage(versionedHash);
            // Revert in this case if the transaction was triggered by the estimation address. This
            // should only be possible during gas estimation or we have bigger problems. Reverting
            // here will make the behavior of gas estimation change such that the gas limit
            // computed will be the amount required to relay the message, even if that amount is
            // greater than the minimum gas limit specified by the user.
            if (tx.origin == Constants.ESTIMATION_ADDRESS) {
                revert("CrossDomainMessenger: failed to relay message");
            }
            return;
        }
        xDomainMsgSender = _sender;
        bool success = SafeCall.call(_target, gasleft() - RELAY_RESERVED_GAS, _value, _message);
        xDomainMsgSender = Constants.DEFAULT_L2_SENDER;
        if (success) {
            // This check is identical to one above, but it ensures that the same message cannot be relayed
            // twice, and adds a layer of protection against rentrancy.
            assert(successfulMessages[versionedHash] == false);
            successfulMessages[versionedHash] = true;
            emit RelayedMessage(versionedHash);
        } else {
            failedMessages[versionedHash] = true;
            emit FailedRelayedMessage(versionedHash);
            // Revert in this case if the transaction was triggered by the estimation address. This
            // should only be possible during gas estimation or we have bigger problems. Reverting
            // here will make the behavior of gas estimation change such that the gas limit
            // computed will be the amount required to relay the message, even if that amount is
            // greater than the minimum gas limit specified by the user.
            if (tx.origin == Constants.ESTIMATION_ADDRESS) {
                revert("CrossDomainMessenger: failed to relay message");
            }
        }
    }
    /// @notice Retrieves the address of the contract or wallet that initiated the currently
    ///         executing message on the other chain. Will throw an error if there is no message
    ///         currently being executed. Allows the recipient of a call to see who triggered it.
    /// @return Address of the sender of the currently executing message on the other chain.
    function xDomainMessageSender() external view returns (address) {
        require(
            xDomainMsgSender != Constants.DEFAULT_L2_SENDER, "CrossDomainMessenger: xDomainMessageSender is not set"
        );
        return xDomainMsgSender;
    }
    /// @notice Retrieves the address of the paired CrossDomainMessenger contract on the other chain
    ///         Public getter is legacy and will be removed in the future. Use `otherMessenger()` instead.
    /// @return CrossDomainMessenger contract on the other chain.
    /// @custom:legacy
    function OTHER_MESSENGER() public view returns (CrossDomainMessenger) {
        return otherMessenger;
    }
    /// @notice Retrieves the next message nonce. Message version will be added to the upper two
    ///         bytes of the message nonce. Message version allows us to treat messages as having
    ///         different structures.
    /// @return Nonce of the next message to be sent, with added message version.
    function messageNonce() public view returns (uint256) {
        return Encoding.encodeVersionedNonce(msgNonce, MESSAGE_VERSION);
    }
    /// @notice Computes the amount of gas required to guarantee that a given message will be
    ///         received on the other chain without running out of gas. Guaranteeing that a message
    ///         will not run out of gas is important because this ensures that a message can always
    ///         be replayed on the other chain if it fails to execute completely.
    /// @param _message     Message to compute the amount of required gas for.
    /// @param _minGasLimit Minimum desired gas limit when message goes to target.
    /// @return Amount of gas required to guarantee message receipt.
    function baseGas(bytes memory _message, uint32 _minGasLimit) public pure returns (uint64) {
        // Base gas should really be computed on the fully encoded message but that would break the
        // expected API, so we instead just add the encoding overhead to the message length inside
        // of this function.
        // We need a minimum amount of execution gas to ensure that the message will be received on
        // the other side without running out of gas (stored within the failedMessages mapping).
        // If we get beyond the hasMinGas check, then we *must* supply more than minGasLimit to
        // the external call.
        uint64 executionGas = uint64(
            // Constant costs for relayMessage
            RELAY_CONSTANT_OVERHEAD
            // Covers dynamic parts of the CALL opcode
            + RELAY_CALL_OVERHEAD
            // Ensures execution of relayMessage completes after call
            + RELAY_RESERVED_GAS
            // Buffer between hasMinGas check and the CALL
            + RELAY_GAS_CHECK_BUFFER
            // Minimum gas limit, multiplied by 64/63 to account for EIP-150.
            + ((_minGasLimit * MIN_GAS_DYNAMIC_OVERHEAD_NUMERATOR) / MIN_GAS_DYNAMIC_OVERHEAD_DENOMINATOR)
        );
        // Total message size is the result of properly ABI encoding the call to relayMessage.
        // Since we only get the message data and not the rest of the calldata, we use the
        // ENCODING_OVERHEAD constant to conservatively account for the remaining bytes.
        uint64 totalMessageSize = uint64(_message.length + ENCODING_OVERHEAD);
        // Finally, replicate the transaction cost formula as defined after EIP-7623. This is
        // mostly relevant in the L1 -> L2 case because we need to be able to cover the intrinsic
        // cost of the message but it doesn't hurt in the L2 -> L1 case. After EIP-7623, the cost
        // of a transaction is floored by its calldata size. We don't need to account for the
        // contract creation case because this is always a call to relayMessage.
        return TX_BASE_GAS
            + uint64(
                Math.max(
                    executionGas + (totalMessageSize * MIN_GAS_CALLDATA_OVERHEAD),
                    (totalMessageSize * FLOOR_CALLDATA_OVERHEAD)
                )
            );
    }
    /// @notice Initializer.
    /// @param _otherMessenger CrossDomainMessenger contract on the other chain.
    function __CrossDomainMessenger_init(CrossDomainMessenger _otherMessenger) internal onlyInitializing {
        // We only want to set the xDomainMsgSender to the default value if it hasn't been initialized yet,
        // meaning that this is a fresh contract deployment.
        // This prevents resetting the xDomainMsgSender to the default value during an upgrade, which would enable
        // a reentrant withdrawal to sandwhich the upgrade replay a withdrawal twice.
        if (xDomainMsgSender == address(0)) {
            xDomainMsgSender = Constants.DEFAULT_L2_SENDER;
        }
        otherMessenger = _otherMessenger;
    }
    /// @notice Sends a low-level message to the other messenger. Needs to be implemented by child
    ///         contracts because the logic for this depends on the network where the messenger is
    ///         being deployed.
    /// @param _to       Recipient of the message on the other chain.
    /// @param _gasLimit Minimum gas limit the message can be executed with.
    /// @param _value    Amount of ETH to send with the message.
    /// @param _data     Message data.
    function _sendMessage(address _to, uint64 _gasLimit, uint256 _value, bytes memory _data) internal virtual;
    /// @notice Checks whether the message is coming from the other messenger. Implemented by child
    ///         contracts because the logic for this depends on the network where the messenger is
    ///         being deployed.
    /// @return Whether the message is coming from the other messenger.
    function _isOtherMessenger() internal view virtual returns (bool);
    /// @notice Checks whether a given call target is a system address that could cause the
    ///         messenger to peform an unsafe action. This is NOT a mechanism for blocking user
    ///         addresses. This is ONLY used to prevent the execution of messages to specific
    ///         system addresses that could cause security issues, e.g., having the
    ///         CrossDomainMessenger send messages to itself.
    /// @param _target Address of the contract to check.
    /// @return Whether or not the address is an unsafe system address.
    function _isUnsafeTarget(address _target) internal view virtual returns (bool);
    /// @notice This function should return true if the contract is paused.
    ///         On L1 this function will check the SuperchainConfig for its paused status.
    ///         On L2 this function should be a no-op.
    /// @return Whether or not the contract is paused.
    function paused() public view virtual returns (bool) {
        return false;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Predeploys
/// @notice Contains constant addresses for protocol contracts that are pre-deployed to the L2 system.
//          This excludes the preinstalls (non-protocol contracts).
library Predeploys {
    /// @notice Number of predeploy-namespace addresses reserved for protocol usage.
    uint256 internal constant PREDEPLOY_COUNT = 2048;
    /// @custom:legacy
    /// @notice Address of the LegacyMessagePasser predeploy. Deprecate. Use the updated
    ///         L2ToL1MessagePasser contract instead.
    address internal constant LEGACY_MESSAGE_PASSER = 0x4200000000000000000000000000000000000000;
    /// @custom:legacy
    /// @notice Address of the L1MessageSender predeploy. Deprecated. Use L2CrossDomainMessenger
    ///         or access tx.origin (or msg.sender) in a L1 to L2 transaction instead.
    ///         Not embedded into new OP-Stack chains.
    address internal constant L1_MESSAGE_SENDER = 0x4200000000000000000000000000000000000001;
    /// @custom:legacy
    /// @notice Address of the DeployerWhitelist predeploy. No longer active.
    address internal constant DEPLOYER_WHITELIST = 0x4200000000000000000000000000000000000002;
    /// @notice Address of the canonical WETH contract.
    address internal constant WETH = 0x4200000000000000000000000000000000000006;
    /// @notice Address of the L2CrossDomainMessenger predeploy.
    address internal constant L2_CROSS_DOMAIN_MESSENGER = 0x4200000000000000000000000000000000000007;
    /// @notice Address of the GasPriceOracle predeploy. Includes fee information
    ///         and helpers for computing the L1 portion of the transaction fee.
    address internal constant GAS_PRICE_ORACLE = 0x420000000000000000000000000000000000000F;
    /// @notice Address of the L2StandardBridge predeploy.
    address internal constant L2_STANDARD_BRIDGE = 0x4200000000000000000000000000000000000010;
    //// @notice Address of the SequencerFeeWallet predeploy.
    address internal constant SEQUENCER_FEE_WALLET = 0x4200000000000000000000000000000000000011;
    /// @notice Address of the OptimismMintableERC20Factory predeploy.
    address internal constant OPTIMISM_MINTABLE_ERC20_FACTORY = 0x4200000000000000000000000000000000000012;
    /// @custom:legacy
    /// @notice Address of the L1BlockNumber predeploy. Deprecated. Use the L1Block predeploy
    ///         instead, which exposes more information about the L1 state.
    address internal constant L1_BLOCK_NUMBER = 0x4200000000000000000000000000000000000013;
    /// @notice Address of the L2ERC721Bridge predeploy.
    address internal constant L2_ERC721_BRIDGE = 0x4200000000000000000000000000000000000014;
    /// @notice Address of the L1Block predeploy.
    address internal constant L1_BLOCK_ATTRIBUTES = 0x4200000000000000000000000000000000000015;
    /// @notice Address of the L2ToL1MessagePasser predeploy.
    address internal constant L2_TO_L1_MESSAGE_PASSER = 0x4200000000000000000000000000000000000016;
    /// @notice Address of the OptimismMintableERC721Factory predeploy.
    address internal constant OPTIMISM_MINTABLE_ERC721_FACTORY = 0x4200000000000000000000000000000000000017;
    /// @notice Address of the ProxyAdmin predeploy.
    address internal constant PROXY_ADMIN = 0x4200000000000000000000000000000000000018;
    /// @notice Address of the BaseFeeVault predeploy.
    address internal constant BASE_FEE_VAULT = 0x4200000000000000000000000000000000000019;
    /// @notice Address of the L1FeeVault predeploy.
    address internal constant L1_FEE_VAULT = 0x420000000000000000000000000000000000001A;
    /// @notice Address of the OperatorFeeVault predeploy.
    address internal constant OPERATOR_FEE_VAULT = 0x420000000000000000000000000000000000001b;
    /// @notice Address of the SchemaRegistry predeploy.
    address internal constant SCHEMA_REGISTRY = 0x4200000000000000000000000000000000000020;
    /// @notice Address of the EAS predeploy.
    address internal constant EAS = 0x4200000000000000000000000000000000000021;
    /// @notice Address of the GovernanceToken predeploy.
    address internal constant GOVERNANCE_TOKEN = 0x4200000000000000000000000000000000000042;
    /// @custom:legacy
    /// @notice Address of the LegacyERC20ETH predeploy. Deprecated. Balances are migrated to the
    ///         state trie as of the Bedrock upgrade. Contract has been locked and write functions
    ///         can no longer be accessed.
    address internal constant LEGACY_ERC20_ETH = 0xDeadDeAddeAddEAddeadDEaDDEAdDeaDDeAD0000;
    /// @notice Address of the CrossL2Inbox predeploy.
    address internal constant CROSS_L2_INBOX = 0x4200000000000000000000000000000000000022;
    /// @notice Address of the L2ToL2CrossDomainMessenger predeploy.
    address internal constant L2_TO_L2_CROSS_DOMAIN_MESSENGER = 0x4200000000000000000000000000000000000023;
    /// @notice Address of the SuperchainWETH predeploy.
    address internal constant SUPERCHAIN_WETH = 0x4200000000000000000000000000000000000024;
    /// @notice Address of the ETHLiquidity predeploy.
    address internal constant ETH_LIQUIDITY = 0x4200000000000000000000000000000000000025;
    /// @notice Address of the OptimismSuperchainERC20Factory predeploy.
    address internal constant OPTIMISM_SUPERCHAIN_ERC20_FACTORY = 0x4200000000000000000000000000000000000026;
    /// @notice Address of the OptimismSuperchainERC20Beacon predeploy.
    address internal constant OPTIMISM_SUPERCHAIN_ERC20_BEACON = 0x4200000000000000000000000000000000000027;
    // TODO: Precalculate the address of the implementation contract
    /// @notice Arbitrary address of the OptimismSuperchainERC20 implementation contract.
    address internal constant OPTIMISM_SUPERCHAIN_ERC20 = 0xB9415c6cA93bdC545D4c5177512FCC22EFa38F28;
    /// @notice Address of the SuperchainTokenBridge predeploy.
    address internal constant SUPERCHAIN_TOKEN_BRIDGE = 0x4200000000000000000000000000000000000028;
    /// @notice Returns the name of the predeploy at the given address.
    function getName(address _addr) internal pure returns (string memory out_) {
        require(isPredeployNamespace(_addr), "Predeploys: address must be a predeploy");
        if (_addr == LEGACY_MESSAGE_PASSER) return "LegacyMessagePasser";
        if (_addr == L1_MESSAGE_SENDER) return "L1MessageSender";
        if (_addr == DEPLOYER_WHITELIST) return "DeployerWhitelist";
        if (_addr == WETH) return "WETH";
        if (_addr == L2_CROSS_DOMAIN_MESSENGER) return "L2CrossDomainMessenger";
        if (_addr == GAS_PRICE_ORACLE) return "GasPriceOracle";
        if (_addr == L2_STANDARD_BRIDGE) return "L2StandardBridge";
        if (_addr == SEQUENCER_FEE_WALLET) return "SequencerFeeVault";
        if (_addr == OPTIMISM_MINTABLE_ERC20_FACTORY) return "OptimismMintableERC20Factory";
        if (_addr == L1_BLOCK_NUMBER) return "L1BlockNumber";
        if (_addr == L2_ERC721_BRIDGE) return "L2ERC721Bridge";
        if (_addr == L1_BLOCK_ATTRIBUTES) return "L1Block";
        if (_addr == L2_TO_L1_MESSAGE_PASSER) return "L2ToL1MessagePasser";
        if (_addr == OPTIMISM_MINTABLE_ERC721_FACTORY) return "OptimismMintableERC721Factory";
        if (_addr == PROXY_ADMIN) return "ProxyAdmin";
        if (_addr == BASE_FEE_VAULT) return "BaseFeeVault";
        if (_addr == L1_FEE_VAULT) return "L1FeeVault";
        if (_addr == OPERATOR_FEE_VAULT) return "OperatorFeeVault";
        if (_addr == SCHEMA_REGISTRY) return "SchemaRegistry";
        if (_addr == EAS) return "EAS";
        if (_addr == GOVERNANCE_TOKEN) return "GovernanceToken";
        if (_addr == LEGACY_ERC20_ETH) return "LegacyERC20ETH";
        if (_addr == CROSS_L2_INBOX) return "CrossL2Inbox";
        if (_addr == L2_TO_L2_CROSS_DOMAIN_MESSENGER) return "L2ToL2CrossDomainMessenger";
        if (_addr == SUPERCHAIN_WETH) return "SuperchainWETH";
        if (_addr == ETH_LIQUIDITY) return "ETHLiquidity";
        if (_addr == OPTIMISM_SUPERCHAIN_ERC20_FACTORY) return "OptimismSuperchainERC20Factory";
        if (_addr == OPTIMISM_SUPERCHAIN_ERC20_BEACON) return "OptimismSuperchainERC20Beacon";
        if (_addr == SUPERCHAIN_TOKEN_BRIDGE) return "SuperchainTokenBridge";
        revert("Predeploys: unnamed predeploy");
    }
    /// @notice Returns true if the predeploy is not proxied.
    function notProxied(address _addr) internal pure returns (bool) {
        return _addr == GOVERNANCE_TOKEN || _addr == WETH;
    }
    /// @notice Returns true if the address is a defined predeploy that is embedded into new OP-Stack chains.
    function isSupportedPredeploy(address _addr, bool _useInterop) internal pure returns (bool) {
        return _addr == LEGACY_MESSAGE_PASSER || _addr == DEPLOYER_WHITELIST || _addr == WETH
            || _addr == L2_CROSS_DOMAIN_MESSENGER || _addr == GAS_PRICE_ORACLE || _addr == L2_STANDARD_BRIDGE
            || _addr == SEQUENCER_FEE_WALLET || _addr == OPTIMISM_MINTABLE_ERC20_FACTORY || _addr == L1_BLOCK_NUMBER
            || _addr == L2_ERC721_BRIDGE || _addr == L1_BLOCK_ATTRIBUTES || _addr == L2_TO_L1_MESSAGE_PASSER
            || _addr == OPTIMISM_MINTABLE_ERC721_FACTORY || _addr == PROXY_ADMIN || _addr == BASE_FEE_VAULT
            || _addr == L1_FEE_VAULT || _addr == OPERATOR_FEE_VAULT || _addr == SCHEMA_REGISTRY || _addr == EAS
            || _addr == GOVERNANCE_TOKEN || (_useInterop && _addr == CROSS_L2_INBOX)
            || (_useInterop && _addr == L2_TO_L2_CROSS_DOMAIN_MESSENGER) || (_useInterop && _addr == SUPERCHAIN_WETH)
            || (_useInterop && _addr == ETH_LIQUIDITY) || (_useInterop && _addr == SUPERCHAIN_TOKEN_BRIDGE);
    }
    function isPredeployNamespace(address _addr) internal pure returns (bool) {
        return uint160(_addr) >> 11 == uint160(0x4200000000000000000000000000000000000000) >> 11;
    }
    /// @notice Function to compute the expected address of the predeploy implementation
    ///         in the genesis state.
    function predeployToCodeNamespace(address _addr) internal pure returns (address) {
        require(
            isPredeployNamespace(_addr), "Predeploys: can only derive code-namespace address for predeploy addresses"
        );
        return address(
            uint160(uint256(uint160(_addr)) & 0xffff | uint256(uint160(0xc0D3C0d3C0d3C0D3c0d3C0d3c0D3C0d3c0d30000)))
        );
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title ISemver
/// @notice ISemver is a simple contract for ensuring that contracts are
///         versioned using semantic versioning.
interface ISemver {
    /// @notice Getter for the semantic version of the contract. This is not
    ///         meant to be used onchain but instead meant to be used by offchain
    ///         tooling.
    /// @return Semver contract version as a string.
    function version() external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ISuperchainConfig {
    enum UpdateType {
        GUARDIAN
    }
    event ConfigUpdate(UpdateType indexed updateType, bytes data);
    event Initialized(uint8 version);
    event Paused(string identifier);
    event Unpaused();
    function GUARDIAN_SLOT() external view returns (bytes32);
    function PAUSED_SLOT() external view returns (bytes32);
    function guardian() external view returns (address guardian_);
    function initialize(address _guardian, bool _paused) external;
    function pause(string memory _identifier) external;
    function paused() external view returns (bool paused_);
    function unpause() external;
    function version() external view returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { Types } from "src/libraries/Types.sol";
import { GameType, Timestamp } from "src/dispute/lib/LibUDT.sol";
import { IDisputeGame } from "interfaces/dispute/IDisputeGame.sol";
import { IDisputeGameFactory } from "interfaces/dispute/IDisputeGameFactory.sol";
import { ISystemConfig } from "interfaces/L1/ISystemConfig.sol";
import { ISuperchainConfig } from "interfaces/L1/ISuperchainConfig.sol";
interface IOptimismPortal2 {
    error AlreadyFinalized();
    error BadTarget();
    error Blacklisted();
    error CallPaused();
    error ContentLengthMismatch();
    error EmptyItem();
    error GasEstimation();
    error InvalidDataRemainder();
    error InvalidDisputeGame();
    error InvalidGameType();
    error InvalidHeader();
    error InvalidMerkleProof();
    error InvalidProof();
    error LargeCalldata();
    error NonReentrant();
    error OutOfGas();
    error ProposalNotValidated();
    error SmallGasLimit();
    error Unauthorized();
    error UnexpectedList();
    error UnexpectedString();
    error Unproven();
    error LegacyGame();
    event DisputeGameBlacklisted(IDisputeGame indexed disputeGame);
    event Initialized(uint8 version);
    event RespectedGameTypeSet(GameType indexed newGameType, Timestamp indexed updatedAt);
    event TransactionDeposited(address indexed from, address indexed to, uint256 indexed version, bytes opaqueData);
    event WithdrawalFinalized(bytes32 indexed withdrawalHash, bool success);
    event WithdrawalProven(bytes32 indexed withdrawalHash, address indexed from, address indexed to);
    event WithdrawalProvenExtension1(bytes32 indexed withdrawalHash, address indexed proofSubmitter);
    receive() external payable;
    function blacklistDisputeGame(IDisputeGame _disputeGame) external;
    function checkWithdrawal(bytes32 _withdrawalHash, address _proofSubmitter) external view;
    function depositTransaction(
        address _to,
        uint256 _value,
        uint64 _gasLimit,
        bool _isCreation,
        bytes memory _data
    )
        external
        payable;
    function disputeGameBlacklist(IDisputeGame) external view returns (bool);
    function disputeGameFactory() external view returns (IDisputeGameFactory);
    function disputeGameFinalityDelaySeconds() external view returns (uint256);
    function donateETH() external payable;
    function finalizeWithdrawalTransaction(Types.WithdrawalTransaction memory _tx) external;
    function finalizeWithdrawalTransactionExternalProof(
        Types.WithdrawalTransaction memory _tx,
        address _proofSubmitter
    )
        external;
    function finalizedWithdrawals(bytes32) external view returns (bool);
    function guardian() external view returns (address);
    function initialize(
        IDisputeGameFactory _disputeGameFactory,
        ISystemConfig _systemConfig,
        ISuperchainConfig _superchainConfig,
        GameType _initialRespectedGameType
    )
        external;
    function l2Sender() external view returns (address);
    function minimumGasLimit(uint64 _byteCount) external pure returns (uint64);
    function numProofSubmitters(bytes32 _withdrawalHash) external view returns (uint256);
    function params() external view returns (uint128 prevBaseFee, uint64 prevBoughtGas, uint64 prevBlockNum); // nosemgrep
    function paused() external view returns (bool);
    function proofMaturityDelaySeconds() external view returns (uint256);
    function proofSubmitters(bytes32, uint256) external view returns (address);
    function proveWithdrawalTransaction(
        Types.WithdrawalTransaction memory _tx,
        uint256 _disputeGameIndex,
        Types.OutputRootProof memory _outputRootProof,
        bytes[] memory _withdrawalProof
    )
        external;
    function provenWithdrawals(
        bytes32,
        address
    )
        external
        view
        returns (IDisputeGame disputeGameProxy, uint64 timestamp); // nosemgrep
    function respectedGameType() external view returns (GameType);
    function respectedGameTypeUpdatedAt() external view returns (uint64);
    function setRespectedGameType(GameType _gameType) external;
    function superchainConfig() external view returns (ISuperchainConfig);
    function systemConfig() external view returns (ISystemConfig);
    function version() external pure returns (string memory);
    function __constructor__(uint256 _proofMaturityDelaySeconds, uint256 _disputeGameFinalityDelaySeconds) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.
            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. It the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`.
        // We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
        // This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
        // Using an algorithm similar to the msb conmputation, we are able to compute `result = 2**(k/2)` which is a
        // good first aproximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1;
        uint256 x = a;
        if (x >> 128 > 0) {
            x >>= 128;
            result <<= 64;
        }
        if (x >> 64 > 0) {
            x >>= 64;
            result <<= 32;
        }
        if (x >> 32 > 0) {
            x >>= 32;
            result <<= 16;
        }
        if (x >> 16 > 0) {
            x >>= 16;
            result <<= 8;
        }
        if (x >> 8 > 0) {
            x >>= 8;
            result <<= 4;
        }
        if (x >> 4 > 0) {
            x >>= 4;
            result <<= 2;
        }
        if (x >> 2 > 0) {
            result <<= 1;
        }
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        uint256 result = sqrt(a);
        if (rounding == Rounding.Up && result * result < a) {
            result += 1;
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title SafeCall
/// @notice Perform low level safe calls
library SafeCall {
    /// @notice Performs a low level call without copying any returndata.
    /// @dev Passes no calldata to the call context.
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _gas, uint256 _value) internal returns (bool success_) {
        assembly {
            success_ :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    0, // inloc
                    0, // inlen
                    0, // outloc
                    0 // outlen
                )
        }
    }
    /// @notice Perform a low level call with all gas without copying any returndata
    /// @param _target   Address to call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _value) internal returns (bool success_) {
        success_ = send(_target, gasleft(), _value);
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(
        address _target,
        uint256 _gas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool success_)
    {
        assembly {
            success_ :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0, // outloc
                    0 // outlen
                )
        }
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, uint256 _value, bytes memory _calldata) internal returns (bool success_) {
        success_ = call({ _target: _target, _gas: gasleft(), _value: _value, _calldata: _calldata });
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, bytes memory _calldata) internal returns (bool success_) {
        success_ = call({ _target: _target, _gas: gasleft(), _value: 0, _calldata: _calldata });
    }
    /// @notice Helper function to determine if there is sufficient gas remaining within the context
    ///         to guarantee that the minimum gas requirement for a call will be met as well as
    ///         optionally reserving a specified amount of gas for after the call has concluded.
    /// @param _minGas      The minimum amount of gas that may be passed to the target context.
    /// @param _reservedGas Optional amount of gas to reserve for the caller after the execution
    ///                     of the target context.
    /// @return `true` if there is enough gas remaining to safely supply `_minGas` to the target
    ///         context as well as reserve `_reservedGas` for the caller after the execution of
    ///         the target context.
    /// @dev !!!!! FOOTGUN ALERT !!!!!
    ///      1.) The 40_000 base buffer is to account for the worst case of the dynamic cost of the
    ///          `CALL` opcode's `address_access_cost`, `positive_value_cost`, and
    ///          `value_to_empty_account_cost` factors with an added buffer of 5,700 gas. It is
    ///          still possible to self-rekt by initiating a withdrawal with a minimum gas limit
    ///          that does not account for the `memory_expansion_cost` & `code_execution_cost`
    ///          factors of the dynamic cost of the `CALL` opcode.
    ///      2.) This function should *directly* precede the external call if possible. There is an
    ///          added buffer to account for gas consumed between this check and the call, but it
    ///          is only 5,700 gas.
    ///      3.) Because EIP-150 ensures that a maximum of 63/64ths of the remaining gas in the call
    ///          frame may be passed to a subcontext, we need to ensure that the gas will not be
    ///          truncated.
    ///      4.) Use wisely. This function is not a silver bullet.
    function hasMinGas(uint256 _minGas, uint256 _reservedGas) internal view returns (bool) {
        bool _hasMinGas;
        assembly {
            // Equation: gas × 63 ≥ minGas × 64 + 63(40_000 + reservedGas)
            _hasMinGas := iszero(lt(mul(gas(), 63), add(mul(_minGas, 64), mul(add(40000, _reservedGas), 63))))
        }
        return _hasMinGas;
    }
    /// @notice Perform a low level call without copying any returndata. This function
    ///         will revert if the call cannot be performed with the specified minimum
    ///         gas.
    /// @param _target   Address to call
    /// @param _minGas   The minimum amount of gas that may be passed to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function callWithMinGas(
        address _target,
        uint256 _minGas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool)
    {
        bool _success;
        bool _hasMinGas = hasMinGas(_minGas, 0);
        assembly {
            // Assertion: gasleft() >= (_minGas * 64) / 63 + 40_000
            if iszero(_hasMinGas) {
                // Store the "Error(string)" selector in scratch space.
                mstore(0, 0x08c379a0)
                // Store the pointer to the string length in scratch space.
                mstore(32, 32)
                // Store the string.
                //
                // SAFETY:
                // - We pad the beginning of the string with two zero bytes as well as the
                // length (24) to ensure that we override the free memory pointer at offset
                // 0x40. This is necessary because the free memory pointer is likely to
                // be greater than 1 byte when this function is called, but it is incredibly
                // unlikely that it will be greater than 3 bytes. As for the data within
                // 0x60, it is ensured that it is 0 due to 0x60 being the zero offset.
                // - It's fine to clobber the free memory pointer, we're reverting.
                mstore(88, 0x0000185361666543616c6c3a204e6f7420656e6f75676820676173)
                // Revert with 'Error("SafeCall: Not enough gas")'
                revert(28, 100)
            }
            // The call will be supplied at least ((_minGas * 64) / 63) gas due to the
            // above assertion. This ensures that, in all circumstances (except for when the
            // `_minGas` does not account for the `memory_expansion_cost` and `code_execution_cost`
            // factors of the dynamic cost of the `CALL` opcode), the call will receive at least
            // the minimum amount of gas specified.
            _success :=
                call(
                    gas(), // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0x00, // outloc
                    0x00 // outlen
                )
        }
        return _success;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { Types } from "src/libraries/Types.sol";
import { Encoding } from "src/libraries/Encoding.sol";
/// @title Hashing
/// @notice Hashing handles Optimism's various different hashing schemes.
library Hashing {
    /// @notice Computes the hash of the RLP encoded L2 transaction that would be generated when a
    ///         given deposit is sent to the L2 system. Useful for searching for a deposit in the L2
    ///         system.
    /// @param _tx User deposit transaction to hash.
    /// @return Hash of the RLP encoded L2 deposit transaction.
    function hashDepositTransaction(Types.UserDepositTransaction memory _tx) internal pure returns (bytes32) {
        return keccak256(Encoding.encodeDepositTransaction(_tx));
    }
    /// @notice Computes the deposit transaction's "source hash", a value that guarantees the hash
    ///         of the L2 transaction that corresponds to a deposit is unique and is
    ///         deterministically generated from L1 transaction data.
    /// @param _l1BlockHash Hash of the L1 block where the deposit was included.
    /// @param _logIndex    The index of the log that created the deposit transaction.
    /// @return Hash of the deposit transaction's "source hash".
    function hashDepositSource(bytes32 _l1BlockHash, uint256 _logIndex) internal pure returns (bytes32) {
        bytes32 depositId = keccak256(abi.encode(_l1BlockHash, _logIndex));
        return keccak256(abi.encode(bytes32(0), depositId));
    }
    /// @notice Hashes the cross domain message based on the version that is encoded into the
    ///         message nonce.
    /// @param _nonce    Message nonce with version encoded into the first two bytes.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes32)
    {
        (, uint16 version) = Encoding.decodeVersionedNonce(_nonce);
        if (version == 0) {
            return hashCrossDomainMessageV0(_target, _sender, _data, _nonce);
        } else if (version == 1) {
            return hashCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data);
        } else {
            revert("Hashing: unknown cross domain message version");
        }
    }
    /// @notice Hashes a cross domain message based on the V0 (legacy) encoding.
    /// @param _target Address of the target of the message.
    /// @param _sender Address of the sender of the message.
    /// @param _data   Data to send with the message.
    /// @param _nonce  Message nonce.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessageV0(
        address _target,
        address _sender,
        bytes memory _data,
        uint256 _nonce
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(Encoding.encodeCrossDomainMessageV0(_target, _sender, _data, _nonce));
    }
    /// @notice Hashes a cross domain message based on the V1 (current) encoding.
    /// @param _nonce    Message nonce.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessageV1(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(Encoding.encodeCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data));
    }
    /// @notice Derives the withdrawal hash according to the encoding in the L2 Withdrawer contract
    /// @param _tx Withdrawal transaction to hash.
    /// @return Hashed withdrawal transaction.
    function hashWithdrawal(Types.WithdrawalTransaction memory _tx) internal pure returns (bytes32) {
        return keccak256(abi.encode(_tx.nonce, _tx.sender, _tx.target, _tx.value, _tx.gasLimit, _tx.data));
    }
    /// @notice Hashes the various elements of an output root proof into an output root hash which
    ///         can be used to check if the proof is valid.
    /// @param _outputRootProof Output root proof which should hash to an output root.
    /// @return Hashed output root proof.
    function hashOutputRootProof(Types.OutputRootProof memory _outputRootProof) internal pure returns (bytes32) {
        return keccak256(
            abi.encode(
                _outputRootProof.version,
                _outputRootProof.stateRoot,
                _outputRootProof.messagePasserStorageRoot,
                _outputRootProof.latestBlockhash
            )
        );
    }
    /// @notice Generates a unique hash for cross l2 messages. This hash is used to identify
    ///         the message and ensure it is not relayed more than once.
    /// @param _destination Chain ID of the destination chain.
    /// @param _source Chain ID of the source chain.
    /// @param _nonce Unique nonce associated with the message to prevent replay attacks.
    /// @param _sender Address of the user who originally sent the message.
    /// @param _target Address of the contract or wallet that the message is targeting on the destination chain.
    /// @param _message The message payload to be relayed to the target on the destination chain.
    /// @return Hash of the encoded message parameters, used to uniquely identify the message.
    function hashL2toL2CrossDomainMessage(
        uint256 _destination,
        uint256 _source,
        uint256 _nonce,
        address _sender,
        address _target,
        bytes memory _message
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(abi.encode(_destination, _source, _nonce, _sender, _target, _message));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { Types } from "src/libraries/Types.sol";
import { Hashing } from "src/libraries/Hashing.sol";
import { RLPWriter } from "src/libraries/rlp/RLPWriter.sol";
/// @title Encoding
/// @notice Encoding handles Optimism's various different encoding schemes.
library Encoding {
    /// @notice RLP encodes the L2 transaction that would be generated when a given deposit is sent
    ///         to the L2 system. Useful for searching for a deposit in the L2 system. The
    ///         transaction is prefixed with 0x7e to identify its EIP-2718 type.
    /// @param _tx User deposit transaction to encode.
    /// @return RLP encoded L2 deposit transaction.
    function encodeDepositTransaction(Types.UserDepositTransaction memory _tx) internal pure returns (bytes memory) {
        bytes32 source = Hashing.hashDepositSource(_tx.l1BlockHash, _tx.logIndex);
        bytes[] memory raw = new bytes[](8);
        raw[0] = RLPWriter.writeBytes(abi.encodePacked(source));
        raw[1] = RLPWriter.writeAddress(_tx.from);
        raw[2] = _tx.isCreation ? RLPWriter.writeBytes("") : RLPWriter.writeAddress(_tx.to);
        raw[3] = RLPWriter.writeUint(_tx.mint);
        raw[4] = RLPWriter.writeUint(_tx.value);
        raw[5] = RLPWriter.writeUint(uint256(_tx.gasLimit));
        raw[6] = RLPWriter.writeBool(false);
        raw[7] = RLPWriter.writeBytes(_tx.data);
        return abi.encodePacked(uint8(0x7e), RLPWriter.writeList(raw));
    }
    /// @notice Encodes the cross domain message based on the version that is encoded into the
    ///         message nonce.
    /// @param _nonce    Message nonce with version encoded into the first two bytes.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes memory)
    {
        (, uint16 version) = decodeVersionedNonce(_nonce);
        if (version == 0) {
            return encodeCrossDomainMessageV0(_target, _sender, _data, _nonce);
        } else if (version == 1) {
            return encodeCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data);
        } else {
            revert("Encoding: unknown cross domain message version");
        }
    }
    /// @notice Encodes a cross domain message based on the V0 (legacy) encoding.
    /// @param _target Address of the target of the message.
    /// @param _sender Address of the sender of the message.
    /// @param _data   Data to send with the message.
    /// @param _nonce  Message nonce.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessageV0(
        address _target,
        address _sender,
        bytes memory _data,
        uint256 _nonce
    )
        internal
        pure
        returns (bytes memory)
    {
        // nosemgrep: sol-style-use-abi-encodecall
        return abi.encodeWithSignature("relayMessage(address,address,bytes,uint256)", _target, _sender, _data, _nonce);
    }
    /// @notice Encodes a cross domain message based on the V1 (current) encoding.
    /// @param _nonce    Message nonce.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessageV1(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes memory)
    {
        // nosemgrep: sol-style-use-abi-encodecall
        return abi.encodeWithSignature(
            "relayMessage(uint256,address,address,uint256,uint256,bytes)",
            _nonce,
            _sender,
            _target,
            _value,
            _gasLimit,
            _data
        );
    }
    /// @notice Adds a version number into the first two bytes of a message nonce.
    /// @param _nonce   Message nonce to encode into.
    /// @param _version Version number to encode into the message nonce.
    /// @return Message nonce with version encoded into the first two bytes.
    function encodeVersionedNonce(uint240 _nonce, uint16 _version) internal pure returns (uint256) {
        uint256 nonce;
        assembly {
            nonce := or(shl(240, _version), _nonce)
        }
        return nonce;
    }
    /// @notice Pulls the version out of a version-encoded nonce.
    /// @param _nonce Message nonce with version encoded into the first two bytes.
    /// @return Nonce without encoded version.
    /// @return Version of the message.
    function decodeVersionedNonce(uint256 _nonce) internal pure returns (uint240, uint16) {
        uint240 nonce;
        uint16 version;
        assembly {
            nonce := and(_nonce, 0x0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            version := shr(240, _nonce)
        }
        return (nonce, version);
    }
    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesEcotone
    /// @param _baseFeeScalar       L1 base fee Scalar
    /// @param _blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param _sequenceNumber      Number of L2 blocks since epoch start.
    /// @param _timestamp           L1 timestamp.
    /// @param _number              L1 blocknumber.
    /// @param _baseFee             L1 base fee.
    /// @param _blobBaseFee         L1 blob base fee.
    /// @param _hash                L1 blockhash.
    /// @param _batcherHash         Versioned hash to authenticate batcher by.
    function encodeSetL1BlockValuesEcotone(
        uint32 _baseFeeScalar,
        uint32 _blobBaseFeeScalar,
        uint64 _sequenceNumber,
        uint64 _timestamp,
        uint64 _number,
        uint256 _baseFee,
        uint256 _blobBaseFee,
        bytes32 _hash,
        bytes32 _batcherHash
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesEcotone()"));
        return abi.encodePacked(
            functionSignature,
            _baseFeeScalar,
            _blobBaseFeeScalar,
            _sequenceNumber,
            _timestamp,
            _number,
            _baseFee,
            _blobBaseFee,
            _hash,
            _batcherHash
        );
    }
    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesIsthmus
    /// @param _baseFeeScalar       L1 base fee Scalar
    /// @param _blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param _sequenceNumber      Number of L2 blocks since epoch start.
    /// @param _timestamp           L1 timestamp.
    /// @param _number              L1 blocknumber.
    /// @param _baseFee             L1 base fee.
    /// @param _blobBaseFee         L1 blob base fee.
    /// @param _hash                L1 blockhash.
    /// @param _batcherHash         Versioned hash to authenticate batcher by.
    /// @param _operatorFeeScalar   Operator fee scalar.
    /// @param _operatorFeeConstant Operator fee constant.
    function encodeSetL1BlockValuesIsthmus(
        uint32 _baseFeeScalar,
        uint32 _blobBaseFeeScalar,
        uint64 _sequenceNumber,
        uint64 _timestamp,
        uint64 _number,
        uint256 _baseFee,
        uint256 _blobBaseFee,
        bytes32 _hash,
        bytes32 _batcherHash,
        uint32 _operatorFeeScalar,
        uint64 _operatorFeeConstant
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesIsthmus()"));
        return abi.encodePacked(
            functionSignature,
            _baseFeeScalar,
            _blobBaseFeeScalar,
            _sequenceNumber,
            _timestamp,
            _number,
            _baseFee,
            _blobBaseFee,
            _hash,
            _batcherHash,
            _operatorFeeScalar,
            _operatorFeeConstant
        );
    }
    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesInterop
    /// @param _baseFeeScalar       L1 base fee Scalar
    /// @param _blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param _sequenceNumber      Number of L2 blocks since epoch start.
    /// @param _timestamp           L1 timestamp.
    /// @param _number              L1 blocknumber.
    /// @param _baseFee             L1 base fee.
    /// @param _blobBaseFee         L1 blob base fee.
    /// @param _hash                L1 blockhash.
    /// @param _batcherHash         Versioned hash to authenticate batcher by.
    function encodeSetL1BlockValuesInterop(
        uint32 _baseFeeScalar,
        uint32 _blobBaseFeeScalar,
        uint64 _sequenceNumber,
        uint64 _timestamp,
        uint64 _number,
        uint256 _baseFee,
        uint256 _blobBaseFee,
        bytes32 _hash,
        bytes32 _batcherHash
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesInterop()"));
        return abi.encodePacked(
            functionSignature,
            _baseFeeScalar,
            _blobBaseFeeScalar,
            _sequenceNumber,
            _timestamp,
            _number,
            _baseFee,
            _blobBaseFee,
            _hash,
            _batcherHash
        );
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Interfaces
import { IResourceMetering } from "interfaces/L1/IResourceMetering.sol";
/// @title Constants
/// @notice Constants is a library for storing constants. Simple! Don't put everything in here, just
///         the stuff used in multiple contracts. Constants that only apply to a single contract
///         should be defined in that contract instead.
library Constants {
    /// @notice Special address to be used as the tx origin for gas estimation calls in the
    ///         OptimismPortal and CrossDomainMessenger calls. You only need to use this address if
    ///         the minimum gas limit specified by the user is not actually enough to execute the
    ///         given message and you're attempting to estimate the actual necessary gas limit. We
    ///         use address(1) because it's the ecrecover precompile and therefore guaranteed to
    ///         never have any code on any EVM chain.
    address internal constant ESTIMATION_ADDRESS = address(1);
    /// @notice Value used for the L2 sender storage slot in both the OptimismPortal and the
    ///         CrossDomainMessenger contracts before an actual sender is set. This value is
    ///         non-zero to reduce the gas cost of message passing transactions.
    address internal constant DEFAULT_L2_SENDER = 0x000000000000000000000000000000000000dEaD;
    /// @notice The storage slot that holds the address of a proxy implementation.
    /// @dev `bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)`
    bytes32 internal constant PROXY_IMPLEMENTATION_ADDRESS =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /// @notice The storage slot that holds the address of the owner.
    /// @dev `bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)`
    bytes32 internal constant PROXY_OWNER_ADDRESS = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /// @notice The address that represents ether when dealing with ERC20 token addresses.
    address internal constant ETHER = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    /// @notice The address that represents the system caller responsible for L1 attributes
    ///         transactions.
    address internal constant DEPOSITOR_ACCOUNT = 0xDeaDDEaDDeAdDeAdDEAdDEaddeAddEAdDEAd0001;
    /// @notice Returns the default values for the ResourceConfig. These are the recommended values
    ///         for a production network.
    function DEFAULT_RESOURCE_CONFIG() internal pure returns (IResourceMetering.ResourceConfig memory) {
        IResourceMetering.ResourceConfig memory config = IResourceMetering.ResourceConfig({
            maxResourceLimit: 20_000_000,
            elasticityMultiplier: 10,
            baseFeeMaxChangeDenominator: 8,
            minimumBaseFee: 1 gwei,
            systemTxMaxGas: 1_000_000,
            maximumBaseFee: type(uint128).max
        });
        return config;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Types
/// @notice Contains various types used throughout the Optimism contract system.
library Types {
    /// @notice OutputProposal represents a commitment to the L2 state. The timestamp is the L1
    ///         timestamp that the output root is posted. This timestamp is used to verify that the
    ///         finalization period has passed since the output root was submitted.
    /// @custom:field outputRoot    Hash of the L2 output.
    /// @custom:field timestamp     Timestamp of the L1 block that the output root was submitted in.
    /// @custom:field l2BlockNumber L2 block number that the output corresponds to.
    struct OutputProposal {
        bytes32 outputRoot;
        uint128 timestamp;
        uint128 l2BlockNumber;
    }
    /// @notice Struct representing the elements that are hashed together to generate an output root
    ///         which itself represents a snapshot of the L2 state.
    /// @custom:field version                  Version of the output root.
    /// @custom:field stateRoot                Root of the state trie at the block of this output.
    /// @custom:field messagePasserStorageRoot Root of the message passer storage trie.
    /// @custom:field latestBlockhash          Hash of the block this output was generated from.
    struct OutputRootProof {
        bytes32 version;
        bytes32 stateRoot;
        bytes32 messagePasserStorageRoot;
        bytes32 latestBlockhash;
    }
    /// @notice Struct representing a deposit transaction (L1 => L2 transaction) created by an end
    ///         user (as opposed to a system deposit transaction generated by the system).
    /// @custom:field from        Address of the sender of the transaction.
    /// @custom:field to          Address of the recipient of the transaction.
    /// @custom:field isCreation  True if the transaction is a contract creation.
    /// @custom:field value       Value to send to the recipient.
    /// @custom:field mint        Amount of ETH to mint.
    /// @custom:field gasLimit    Gas limit of the transaction.
    /// @custom:field data        Data of the transaction.
    /// @custom:field l1BlockHash Hash of the block the transaction was submitted in.
    /// @custom:field logIndex    Index of the log in the block the transaction was submitted in.
    struct UserDepositTransaction {
        address from;
        address to;
        bool isCreation;
        uint256 value;
        uint256 mint;
        uint64 gasLimit;
        bytes data;
        bytes32 l1BlockHash;
        uint256 logIndex;
    }
    /// @notice Struct representing a withdrawal transaction.
    /// @custom:field nonce    Nonce of the withdrawal transaction
    /// @custom:field sender   Address of the sender of the transaction.
    /// @custom:field target   Address of the recipient of the transaction.
    /// @custom:field value    Value to send to the recipient.
    /// @custom:field gasLimit Gas limit of the transaction.
    /// @custom:field data     Data of the transaction.
    struct WithdrawalTransaction {
        uint256 nonce;
        address sender;
        address target;
        uint256 value;
        uint256 gasLimit;
        bytes data;
    }
    /// @notice Enum representing where the FeeVault withdraws funds to.
    /// @custom:value L1 FeeVault withdraws funds to L1.
    /// @custom:value L2 FeeVault withdraws funds to L2.
    enum WithdrawalNetwork {
        L1,
        L2
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;
// Libraries
import { Position } from "src/dispute/lib/LibPosition.sol";
using LibClaim for Claim global;
using LibHash for Hash global;
using LibDuration for Duration global;
using LibClock for Clock global;
using LibGameId for GameId global;
using LibTimestamp for Timestamp global;
using LibVMStatus for VMStatus global;
using LibGameType for GameType global;
/// @notice A `Clock` represents a packed `Duration` and `Timestamp`
/// @dev The packed layout of this type is as follows:
/// ┌────────────┬────────────────┐
/// │    Bits    │     Value      │
/// ├────────────┼────────────────┤
/// │ [0, 64)    │ Duration       │
/// │ [64, 128)  │ Timestamp      │
/// └────────────┴────────────────┘
type Clock is uint128;
/// @title LibClock
/// @notice This library contains helper functions for working with the `Clock` type.
library LibClock {
    /// @notice Packs a `Duration` and `Timestamp` into a `Clock` type.
    /// @param _duration The `Duration` to pack into the `Clock` type.
    /// @param _timestamp The `Timestamp` to pack into the `Clock` type.
    /// @return clock_ The `Clock` containing the `_duration` and `_timestamp`.
    function wrap(Duration _duration, Timestamp _timestamp) internal pure returns (Clock clock_) {
        assembly {
            clock_ := or(shl(0x40, _duration), _timestamp)
        }
    }
    /// @notice Pull the `Duration` out of a `Clock` type.
    /// @param _clock The `Clock` type to pull the `Duration` out of.
    /// @return duration_ The `Duration` pulled out of `_clock`.
    function duration(Clock _clock) internal pure returns (Duration duration_) {
        // Shift the high-order 64 bits into the low-order 64 bits, leaving only the `duration`.
        assembly {
            duration_ := shr(0x40, _clock)
        }
    }
    /// @notice Pull the `Timestamp` out of a `Clock` type.
    /// @param _clock The `Clock` type to pull the `Timestamp` out of.
    /// @return timestamp_ The `Timestamp` pulled out of `_clock`.
    function timestamp(Clock _clock) internal pure returns (Timestamp timestamp_) {
        // Clean the high-order 192 bits by shifting the clock left and then right again, leaving
        // only the `timestamp`.
        assembly {
            timestamp_ := shr(0xC0, shl(0xC0, _clock))
        }
    }
    /// @notice Get the value of a `Clock` type in the form of the underlying uint128.
    /// @param _clock The `Clock` type to get the value of.
    /// @return clock_ The value of the `Clock` type as a uint128 type.
    function raw(Clock _clock) internal pure returns (uint128 clock_) {
        assembly {
            clock_ := _clock
        }
    }
}
/// @notice A `GameId` represents a packed 4 byte game ID, a 8 byte timestamp, and a 20 byte address.
/// @dev The packed layout of this type is as follows:
/// ┌───────────┬───────────┐
/// │   Bits    │   Value   │
/// ├───────────┼───────────┤
/// │ [0, 32)   │ Game Type │
/// │ [32, 96)  │ Timestamp │
/// │ [96, 256) │ Address   │
/// └───────────┴───────────┘
type GameId is bytes32;
/// @title LibGameId
/// @notice Utility functions for packing and unpacking GameIds.
library LibGameId {
    /// @notice Packs values into a 32 byte GameId type.
    /// @param _gameType The game type.
    /// @param _timestamp The timestamp of the game's creation.
    /// @param _gameProxy The game proxy address.
    /// @return gameId_ The packed GameId.
    function pack(
        GameType _gameType,
        Timestamp _timestamp,
        address _gameProxy
    )
        internal
        pure
        returns (GameId gameId_)
    {
        assembly {
            gameId_ := or(or(shl(224, _gameType), shl(160, _timestamp)), _gameProxy)
        }
    }
    /// @notice Unpacks values from a 32 byte GameId type.
    /// @param _gameId The packed GameId.
    /// @return gameType_ The game type.
    /// @return timestamp_ The timestamp of the game's creation.
    /// @return gameProxy_ The game proxy address.
    function unpack(GameId _gameId)
        internal
        pure
        returns (GameType gameType_, Timestamp timestamp_, address gameProxy_)
    {
        assembly {
            gameType_ := shr(224, _gameId)
            timestamp_ := and(shr(160, _gameId), 0xFFFFFFFFFFFFFFFF)
            gameProxy_ := and(_gameId, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
        }
    }
}
/// @notice A claim represents an MPT root representing the state of the fault proof program.
type Claim is bytes32;
/// @title LibClaim
/// @notice This library contains helper functions for working with the `Claim` type.
library LibClaim {
    /// @notice Get the value of a `Claim` type in the form of the underlying bytes32.
    /// @param _claim The `Claim` type to get the value of.
    /// @return claim_ The value of the `Claim` type as a bytes32 type.
    function raw(Claim _claim) internal pure returns (bytes32 claim_) {
        assembly {
            claim_ := _claim
        }
    }
    /// @notice Hashes a claim and a position together.
    /// @param _claim A Claim type.
    /// @param _position The position of `claim`.
    /// @param _challengeIndex The index of the claim being moved against.
    /// @return claimHash_ A hash of abi.encodePacked(claim, position|challengeIndex);
    function hashClaimPos(
        Claim _claim,
        Position _position,
        uint256 _challengeIndex
    )
        internal
        pure
        returns (Hash claimHash_)
    {
        assembly {
            mstore(0x00, _claim)
            mstore(0x20, or(shl(128, _position), and(0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, _challengeIndex)))
            claimHash_ := keccak256(0x00, 0x40)
        }
    }
}
/// @notice A dedicated duration type.
/// @dev Unit: seconds
type Duration is uint64;
/// @title LibDuration
/// @notice This library contains helper functions for working with the `Duration` type.
library LibDuration {
    /// @notice Get the value of a `Duration` type in the form of the underlying uint64.
    /// @param _duration The `Duration` type to get the value of.
    /// @return duration_ The value of the `Duration` type as a uint64 type.
    function raw(Duration _duration) internal pure returns (uint64 duration_) {
        assembly {
            duration_ := _duration
        }
    }
}
/// @notice A custom type for a generic hash.
type Hash is bytes32;
/// @title LibHash
/// @notice This library contains helper functions for working with the `Hash` type.
library LibHash {
    /// @notice Get the value of a `Hash` type in the form of the underlying bytes32.
    /// @param _hash The `Hash` type to get the value of.
    /// @return hash_ The value of the `Hash` type as a bytes32 type.
    function raw(Hash _hash) internal pure returns (bytes32 hash_) {
        assembly {
            hash_ := _hash
        }
    }
}
/// @notice A dedicated timestamp type.
type Timestamp is uint64;
/// @title LibTimestamp
/// @notice This library contains helper functions for working with the `Timestamp` type.
library LibTimestamp {
    /// @notice Get the value of a `Timestamp` type in the form of the underlying uint64.
    /// @param _timestamp The `Timestamp` type to get the value of.
    /// @return timestamp_ The value of the `Timestamp` type as a uint64 type.
    function raw(Timestamp _timestamp) internal pure returns (uint64 timestamp_) {
        assembly {
            timestamp_ := _timestamp
        }
    }
}
/// @notice A `VMStatus` represents the status of a VM execution.
type VMStatus is uint8;
/// @title LibVMStatus
/// @notice This library contains helper functions for working with the `VMStatus` type.
library LibVMStatus {
    /// @notice Get the value of a `VMStatus` type in the form of the underlying uint8.
    /// @param _vmstatus The `VMStatus` type to get the value of.
    /// @return vmstatus_ The value of the `VMStatus` type as a uint8 type.
    function raw(VMStatus _vmstatus) internal pure returns (uint8 vmstatus_) {
        assembly {
            vmstatus_ := _vmstatus
        }
    }
}
/// @notice A `GameType` represents the type of game being played.
type GameType is uint32;
/// @title LibGameType
/// @notice This library contains helper functions for working with the `GameType` type.
library LibGameType {
    /// @notice Get the value of a `GameType` type in the form of the underlying uint32.
    /// @param _gametype The `GameType` type to get the value of.
    /// @return gametype_ The value of the `GameType` type as a uint32 type.
    function raw(GameType _gametype) internal pure returns (uint32 gametype_) {
        assembly {
            gametype_ := _gametype
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IInitializable } from "interfaces/dispute/IInitializable.sol";
import { Timestamp, GameStatus, GameType, Claim, Hash } from "src/dispute/lib/Types.sol";
interface IDisputeGame is IInitializable {
    event Resolved(GameStatus indexed status);
    function createdAt() external view returns (Timestamp);
    function resolvedAt() external view returns (Timestamp);
    function status() external view returns (GameStatus);
    function gameType() external view returns (GameType gameType_);
    function gameCreator() external pure returns (address creator_);
    function rootClaim() external pure returns (Claim rootClaim_);
    function l1Head() external pure returns (Hash l1Head_);
    function l2BlockNumber() external pure returns (uint256 l2BlockNumber_);
    function extraData() external pure returns (bytes memory extraData_);
    function resolve() external returns (GameStatus status_);
    function gameData() external view returns (GameType gameType_, Claim rootClaim_, bytes memory extraData_);
    function wasRespectedGameTypeWhenCreated() external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IDisputeGame } from "interfaces/dispute/IDisputeGame.sol";
import { GameId, Timestamp, Claim, Hash, GameType } from "src/dispute/lib/Types.sol";
interface IDisputeGameFactory {
    struct GameSearchResult {
        uint256 index;
        GameId metadata;
        Timestamp timestamp;
        Claim rootClaim;
        bytes extraData;
    }
    error GameAlreadyExists(Hash uuid);
    error IncorrectBondAmount();
    error NoImplementation(GameType gameType);
    event DisputeGameCreated(address indexed disputeProxy, GameType indexed gameType, Claim indexed rootClaim);
    event ImplementationSet(address indexed impl, GameType indexed gameType);
    event InitBondUpdated(GameType indexed gameType, uint256 indexed newBond);
    event Initialized(uint8 version);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    function create(
        GameType _gameType,
        Claim _rootClaim,
        bytes memory _extraData
    )
        external
        payable
        returns (IDisputeGame proxy_);
    function findLatestGames(
        GameType _gameType,
        uint256 _start,
        uint256 _n
    )
        external
        view
        returns (GameSearchResult[] memory games_);
    function gameAtIndex(uint256 _index)
        external
        view
        returns (GameType gameType_, Timestamp timestamp_, IDisputeGame proxy_);
    function gameCount() external view returns (uint256 gameCount_);
    function gameImpls(GameType) external view returns (IDisputeGame);
    function games(
        GameType _gameType,
        Claim _rootClaim,
        bytes memory _extraData
    )
        external
        view
        returns (IDisputeGame proxy_, Timestamp timestamp_);
    function getGameUUID(
        GameType _gameType,
        Claim _rootClaim,
        bytes memory _extraData
    )
        external
        pure
        returns (Hash uuid_);
    function initBonds(GameType) external view returns (uint256);
    function initialize(address _owner) external;
    function owner() external view returns (address);
    function renounceOwnership() external;
    function setImplementation(GameType _gameType, IDisputeGame _impl) external;
    function setInitBond(GameType _gameType, uint256 _initBond) external;
    function transferOwnership(address newOwner) external; // nosemgrep
    function version() external view returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IResourceMetering } from "interfaces/L1/IResourceMetering.sol";
interface ISystemConfig {
    enum UpdateType {
        BATCHER,
        FEE_SCALARS,
        GAS_LIMIT,
        UNSAFE_BLOCK_SIGNER,
        EIP_1559_PARAMS,
        OPERATOR_FEE_PARAMS
    }
    struct Addresses {
        address l1CrossDomainMessenger;
        address l1ERC721Bridge;
        address l1StandardBridge;
        address disputeGameFactory;
        address optimismPortal;
        address optimismMintableERC20Factory;
    }
    event ConfigUpdate(uint256 indexed version, UpdateType indexed updateType, bytes data);
    event Initialized(uint8 version);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    function BATCH_INBOX_SLOT() external view returns (bytes32);
    function DISPUTE_GAME_FACTORY_SLOT() external view returns (bytes32);
    function L1_CROSS_DOMAIN_MESSENGER_SLOT() external view returns (bytes32);
    function L1_ERC_721_BRIDGE_SLOT() external view returns (bytes32);
    function L1_STANDARD_BRIDGE_SLOT() external view returns (bytes32);
    function OPTIMISM_MINTABLE_ERC20_FACTORY_SLOT() external view returns (bytes32);
    function OPTIMISM_PORTAL_SLOT() external view returns (bytes32);
    function START_BLOCK_SLOT() external view returns (bytes32);
    function UNSAFE_BLOCK_SIGNER_SLOT() external view returns (bytes32);
    function VERSION() external view returns (uint256);
    function basefeeScalar() external view returns (uint32);
    function batchInbox() external view returns (address addr_);
    function batcherHash() external view returns (bytes32);
    function blobbasefeeScalar() external view returns (uint32);
    function disputeGameFactory() external view returns (address addr_);
    function gasLimit() external view returns (uint64);
    function eip1559Denominator() external view returns (uint32);
    function eip1559Elasticity() external view returns (uint32);
    function getAddresses() external view returns (Addresses memory);
    function initialize(
        address _owner,
        uint32 _basefeeScalar,
        uint32 _blobbasefeeScalar,
        bytes32 _batcherHash,
        uint64 _gasLimit,
        address _unsafeBlockSigner,
        IResourceMetering.ResourceConfig memory _config,
        address _batchInbox,
        Addresses memory _addresses
    )
        external;
    function l1CrossDomainMessenger() external view returns (address addr_);
    function l1ERC721Bridge() external view returns (address addr_);
    function l1StandardBridge() external view returns (address addr_);
    function maximumGasLimit() external pure returns (uint64);
    function minimumGasLimit() external view returns (uint64);
    function operatorFeeConstant() external view returns (uint64);
    function operatorFeeScalar() external view returns (uint32);
    function optimismMintableERC20Factory() external view returns (address addr_);
    function optimismPortal() external view returns (address addr_);
    function overhead() external view returns (uint256);
    function owner() external view returns (address);
    function renounceOwnership() external;
    function resourceConfig() external view returns (IResourceMetering.ResourceConfig memory);
    function scalar() external view returns (uint256);
    function setBatcherHash(bytes32 _batcherHash) external;
    function setGasConfig(uint256 _overhead, uint256 _scalar) external;
    function setGasConfigEcotone(uint32 _basefeeScalar, uint32 _blobbasefeeScalar) external;
    function setGasLimit(uint64 _gasLimit) external;
    function setOperatorFeeScalars(uint32 _operatorFeeScalar, uint64 _operatorFeeConstant) external;
    function setUnsafeBlockSigner(address _unsafeBlockSigner) external;
    function setEIP1559Params(uint32 _denominator, uint32 _elasticity) external;
    function startBlock() external view returns (uint256 startBlock_);
    function transferOwnership(address newOwner) external; // nosemgrep
    function unsafeBlockSigner() external view returns (address addr_);
    function version() external pure returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @custom:attribution https://github.com/bakaoh/solidity-rlp-encode
/// @title RLPWriter
/// @author RLPWriter is a library for encoding Solidity types to RLP bytes. Adapted from Bakaoh's
///         RLPEncode library (https://github.com/bakaoh/solidity-rlp-encode) with minor
///         modifications to improve legibility.
library RLPWriter {
    /// @notice RLP encodes a byte string.
    /// @param _in The byte string to encode.
    /// @return out_ The RLP encoded string in bytes.
    function writeBytes(bytes memory _in) internal pure returns (bytes memory out_) {
        if (_in.length == 1 && uint8(_in[0]) < 128) {
            out_ = _in;
        } else {
            out_ = abi.encodePacked(_writeLength(_in.length, 128), _in);
        }
    }
    /// @notice RLP encodes a list of RLP encoded byte byte strings.
    /// @param _in The list of RLP encoded byte strings.
    /// @return list_ The RLP encoded list of items in bytes.
    function writeList(bytes[] memory _in) internal pure returns (bytes memory list_) {
        list_ = _flatten(_in);
        list_ = abi.encodePacked(_writeLength(list_.length, 192), list_);
    }
    /// @notice RLP encodes a string.
    /// @param _in The string to encode.
    /// @return out_ The RLP encoded string in bytes.
    function writeString(string memory _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(bytes(_in));
    }
    /// @notice RLP encodes an address.
    /// @param _in The address to encode.
    /// @return out_ The RLP encoded address in bytes.
    function writeAddress(address _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(abi.encodePacked(_in));
    }
    /// @notice RLP encodes a uint.
    /// @param _in The uint256 to encode.
    /// @return out_ The RLP encoded uint256 in bytes.
    function writeUint(uint256 _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(_toBinary(_in));
    }
    /// @notice RLP encodes a bool.
    /// @param _in The bool to encode.
    /// @return out_ The RLP encoded bool in bytes.
    function writeBool(bool _in) internal pure returns (bytes memory out_) {
        out_ = new bytes(1);
        out_[0] = (_in ? bytes1(0x01) : bytes1(0x80));
    }
    /// @notice Encode the first byte and then the `len` in binary form if `length` is more than 55.
    /// @param _len    The length of the string or the payload.
    /// @param _offset 128 if item is string, 192 if item is list.
    /// @return out_ RLP encoded bytes.
    function _writeLength(uint256 _len, uint256 _offset) private pure returns (bytes memory out_) {
        if (_len < 56) {
            out_ = new bytes(1);
            out_[0] = bytes1(uint8(_len) + uint8(_offset));
        } else {
            uint256 lenLen;
            uint256 i = 1;
            while (_len / i != 0) {
                lenLen++;
                i *= 256;
            }
            out_ = new bytes(lenLen + 1);
            out_[0] = bytes1(uint8(lenLen) + uint8(_offset) + 55);
            for (i = 1; i <= lenLen; i++) {
                out_[i] = bytes1(uint8((_len / (256 ** (lenLen - i))) % 256));
            }
        }
    }
    /// @notice Encode integer in big endian binary form with no leading zeroes.
    /// @param _x The integer to encode.
    /// @return out_ RLP encoded bytes.
    function _toBinary(uint256 _x) private pure returns (bytes memory out_) {
        bytes memory b = abi.encodePacked(_x);
        uint256 i = 0;
        for (; i < 32; i++) {
            if (b[i] != 0) {
                break;
            }
        }
        out_ = new bytes(32 - i);
        for (uint256 j = 0; j < out_.length; j++) {
            out_[j] = b[i++];
        }
    }
    /// @custom:attribution https://github.com/Arachnid/solidity-stringutils
    /// @notice Copies a piece of memory to another location.
    /// @param _dest Destination location.
    /// @param _src  Source location.
    /// @param _len  Length of memory to copy.
    function _memcpy(uint256 _dest, uint256 _src, uint256 _len) private pure {
        uint256 dest = _dest;
        uint256 src = _src;
        uint256 len = _len;
        for (; len >= 32; len -= 32) {
            assembly {
                mstore(dest, mload(src))
            }
            dest += 32;
            src += 32;
        }
        uint256 mask;
        unchecked {
            mask = 256 ** (32 - len) - 1;
        }
        assembly {
            let srcpart := and(mload(src), not(mask))
            let destpart := and(mload(dest), mask)
            mstore(dest, or(destpart, srcpart))
        }
    }
    /// @custom:attribution https://github.com/sammayo/solidity-rlp-encoder
    /// @notice Flattens a list of byte strings into one byte string.
    /// @param _list List of byte strings to flatten.
    /// @return out_ The flattened byte string.
    function _flatten(bytes[] memory _list) private pure returns (bytes memory out_) {
        if (_list.length == 0) {
            return new bytes(0);
        }
        uint256 len;
        uint256 i = 0;
        for (; i < _list.length; i++) {
            len += _list[i].length;
        }
        out_ = new bytes(len);
        uint256 flattenedPtr;
        assembly {
            flattenedPtr := add(out_, 0x20)
        }
        for (i = 0; i < _list.length; i++) {
            bytes memory item = _list[i];
            uint256 listPtr;
            assembly {
                listPtr := add(item, 0x20)
            }
            _memcpy(flattenedPtr, listPtr, item.length);
            flattenedPtr += _list[i].length;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IResourceMetering {
    struct ResourceParams {
        uint128 prevBaseFee;
        uint64 prevBoughtGas;
        uint64 prevBlockNum;
    }
    struct ResourceConfig {
        uint32 maxResourceLimit;
        uint8 elasticityMultiplier;
        uint8 baseFeeMaxChangeDenominator;
        uint32 minimumBaseFee;
        uint32 systemTxMaxGas;
        uint128 maximumBaseFee;
    }
    error OutOfGas();
    event Initialized(uint8 version);
    function params() external view returns (uint128 prevBaseFee, uint64 prevBoughtGas, uint64 prevBlockNum); // nosemgrep
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;
using LibPosition for Position global;
/// @notice A `Position` represents a position of a claim within the game tree.
/// @dev This is represented as a "generalized index" where the high-order bit
/// is the level in the tree and the remaining bits is a unique bit pattern, allowing
/// a unique identifier for each node in the tree. Mathematically, it is calculated
/// as 2^{depth} + indexAtDepth.
type Position is uint128;
/// @title LibPosition
/// @notice This library contains helper functions for working with the `Position` type.
library LibPosition {
    /// @notice the `MAX_POSITION_BITLEN` is the number of bits that the `Position` type, and the implementation of
    ///         its behavior within this library, can safely support.
    uint8 internal constant MAX_POSITION_BITLEN = 126;
    /// @notice Computes a generalized index (2^{depth} + indexAtDepth).
    /// @param _depth The depth of the position.
    /// @param _indexAtDepth The index at the depth of the position.
    /// @return position_ The computed generalized index.
    function wrap(uint8 _depth, uint128 _indexAtDepth) internal pure returns (Position position_) {
        assembly {
            // gindex = 2^{_depth} + _indexAtDepth
            position_ := add(shl(_depth, 1), _indexAtDepth)
        }
    }
    /// @notice Pulls the `depth` out of a `Position` type.
    /// @param _position The generalized index to get the `depth` of.
    /// @return depth_ The `depth` of the `position` gindex.
    /// @custom:attribution Solady <https://github.com/Vectorized/Solady>
    function depth(Position _position) internal pure returns (uint8 depth_) {
        // Return the most significant bit offset, which signifies the depth of the gindex.
        assembly {
            depth_ := or(depth_, shl(6, lt(0xffffffffffffffff, shr(depth_, _position))))
            depth_ := or(depth_, shl(5, lt(0xffffffff, shr(depth_, _position))))
            // For the remaining 32 bits, use a De Bruijn lookup.
            _position := shr(depth_, _position)
            _position := or(_position, shr(1, _position))
            _position := or(_position, shr(2, _position))
            _position := or(_position, shr(4, _position))
            _position := or(_position, shr(8, _position))
            _position := or(_position, shr(16, _position))
            depth_ :=
                or(
                    depth_,
                    byte(
                        shr(251, mul(_position, shl(224, 0x07c4acdd))),
                        0x0009010a0d15021d0b0e10121619031e080c141c0f111807131b17061a05041f
                    )
                )
        }
    }
    /// @notice Pulls the `indexAtDepth` out of a `Position` type.
    ///         The `indexAtDepth` is the left/right index of a position at a specific depth within
    ///         the binary tree, starting from index 0. For example, at gindex 2, the `depth` = 1
    ///         and the `indexAtDepth` = 0.
    /// @param _position The generalized index to get the `indexAtDepth` of.
    /// @return indexAtDepth_ The `indexAtDepth` of the `position` gindex.
    function indexAtDepth(Position _position) internal pure returns (uint128 indexAtDepth_) {
        // Return bits p_{msb-1}...p_{0}. This effectively pulls the 2^{depth} out of the gindex,
        // leaving only the `indexAtDepth`.
        uint256 msb = depth(_position);
        assembly {
            indexAtDepth_ := sub(_position, shl(msb, 1))
        }
    }
    /// @notice Get the left child of `_position`.
    /// @param _position The position to get the left position of.
    /// @return left_ The position to the left of `position`.
    function left(Position _position) internal pure returns (Position left_) {
        assembly {
            left_ := shl(1, _position)
        }
    }
    /// @notice Get the right child of `_position`
    /// @param _position The position to get the right position of.
    /// @return right_ The position to the right of `position`.
    function right(Position _position) internal pure returns (Position right_) {
        assembly {
            right_ := or(1, shl(1, _position))
        }
    }
    /// @notice Get the parent position of `_position`.
    /// @param _position The position to get the parent position of.
    /// @return parent_ The parent position of `position`.
    function parent(Position _position) internal pure returns (Position parent_) {
        assembly {
            parent_ := shr(1, _position)
        }
    }
    /// @notice Get the deepest, right most gindex relative to the `position`. This is equivalent to
    ///         calling `right` on a position until the maximum depth is reached.
    /// @param _position The position to get the relative deepest, right most gindex of.
    /// @param _maxDepth The maximum depth of the game.
    /// @return rightIndex_ The deepest, right most gindex relative to the `position`.
    function rightIndex(Position _position, uint256 _maxDepth) internal pure returns (Position rightIndex_) {
        uint256 msb = depth(_position);
        assembly {
            let remaining := sub(_maxDepth, msb)
            rightIndex_ := or(shl(remaining, _position), sub(shl(remaining, 1), 1))
        }
    }
    /// @notice Get the deepest, right most trace index relative to the `position`. This is
    ///         equivalent to calling `right` on a position until the maximum depth is reached and
    ///         then finding its index at depth.
    /// @param _position The position to get the relative trace index of.
    /// @param _maxDepth The maximum depth of the game.
    /// @return traceIndex_ The trace index relative to the `position`.
    function traceIndex(Position _position, uint256 _maxDepth) internal pure returns (uint256 traceIndex_) {
        uint256 msb = depth(_position);
        assembly {
            let remaining := sub(_maxDepth, msb)
            traceIndex_ := sub(or(shl(remaining, _position), sub(shl(remaining, 1), 1)), shl(_maxDepth, 1))
        }
    }
    /// @notice Gets the position of the highest ancestor of `_position` that commits to the same
    ///         trace index.
    /// @param _position The position to get the highest ancestor of.
    /// @return ancestor_ The highest ancestor of `position` that commits to the same trace index.
    function traceAncestor(Position _position) internal pure returns (Position ancestor_) {
        // Create a field with only the lowest unset bit of `_position` set.
        Position lsb;
        assembly {
            lsb := and(not(_position), add(_position, 1))
        }
        // Find the index of the lowest unset bit within the field.
        uint256 msb = depth(lsb);
        // The highest ancestor that commits to the same trace index is the original position
        // shifted right by the index of the lowest unset bit.
        assembly {
            let a := shr(msb, _position)
            // Bound the ancestor to the minimum gindex, 1.
            ancestor_ := or(a, iszero(a))
        }
    }
    /// @notice Gets the position of the highest ancestor of `_position` that commits to the same
    ///         trace index, while still being below `_upperBoundExclusive`.
    /// @param _position The position to get the highest ancestor of.
    /// @param _upperBoundExclusive The exclusive upper depth bound, used to inform where to stop in order
    ///                             to not escape a sub-tree.
    /// @return ancestor_ The highest ancestor of `position` that commits to the same trace index.
    function traceAncestorBounded(
        Position _position,
        uint256 _upperBoundExclusive
    )
        internal
        pure
        returns (Position ancestor_)
    {
        // This function only works for positions that are below the upper bound.
        if (_position.depth() <= _upperBoundExclusive) {
            assembly {
                // Revert with `ClaimAboveSplit()`
                mstore(0x00, 0xb34b5c22)
                revert(0x1C, 0x04)
            }
        }
        // Grab the global trace ancestor.
        ancestor_ = traceAncestor(_position);
        // If the ancestor is above or at the upper bound, shift it to be below the upper bound.
        // This should be a special case that only covers positions that commit to the final leaf
        // in a sub-tree.
        if (ancestor_.depth() <= _upperBoundExclusive) {
            ancestor_ = ancestor_.rightIndex(_upperBoundExclusive + 1);
        }
    }
    /// @notice Get the move position of `_position`, which is the left child of:
    ///         1. `_position` if `_isAttack` is true.
    ///         2. `_position | 1` if `_isAttack` is false.
    /// @param _position The position to get the relative attack/defense position of.
    /// @param _isAttack Whether or not the move is an attack move.
    /// @return move_ The move position relative to `position`.
    function move(Position _position, bool _isAttack) internal pure returns (Position move_) {
        assembly {
            move_ := shl(1, or(iszero(_isAttack), _position))
        }
    }
    /// @notice Get the value of a `Position` type in the form of the underlying uint128.
    /// @param _position The position to get the value of.
    /// @return raw_ The value of the `position` as a uint128 type.
    function raw(Position _position) internal pure returns (uint128 raw_) {
        assembly {
            raw_ := _position
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IInitializable {
    function initialize() external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;
// Libraries
import {
    Position,
    Hash,
    GameType,
    VMStatus,
    Timestamp,
    Duration,
    Clock,
    GameId,
    Claim,
    LibGameId,
    LibClock
} from "src/dispute/lib/LibUDT.sol";
/// @notice The current status of the dispute game.
enum GameStatus {
    // The game is currently in progress, and has not been resolved.
    IN_PROGRESS,
    // The game has concluded, and the `rootClaim` was challenged successfully.
    CHALLENGER_WINS,
    // The game has concluded, and the `rootClaim` could not be contested.
    DEFENDER_WINS
}
/// @notice The game's bond distribution type. Games are expected to start in the `UNDECIDED`
///         state, and then choose either `NORMAL` or `REFUND`.
enum BondDistributionMode {
    // Bond distribution strategy has not been chosen.
    UNDECIDED,
    // Bonds should be distributed as normal.
    NORMAL,
    // Bonds should be refunded to claimants.
    REFUND
}
/// @notice Represents an L2 output root and the L2 block number at which it was generated.
/// @custom:field root The output root.
/// @custom:field l2BlockNumber The L2 block number at which the output root was generated.
struct OutputRoot {
    Hash root;
    uint256 l2BlockNumber;
}
/// @title GameTypes
/// @notice A library that defines the IDs of games that can be played.
library GameTypes {
    /// @dev A dispute game type the uses the cannon vm.
    GameType internal constant CANNON = GameType.wrap(0);
    /// @dev A permissioned dispute game type that uses the cannon vm.
    GameType internal constant PERMISSIONED_CANNON = GameType.wrap(1);
    /// @notice A dispute game type that uses the asterisc vm.
    GameType internal constant ASTERISC = GameType.wrap(2);
    /// @notice A dispute game type that uses the asterisc vm with Kona.
    GameType internal constant ASTERISC_KONA = GameType.wrap(3);
    /// @notice A dispute game type that uses OP Succinct
    GameType internal constant OP_SUCCINCT = GameType.wrap(6);
    /// @notice A dispute game type with short game duration for testing withdrawals.
    ///         Not intended for production use.
    GameType internal constant FAST = GameType.wrap(254);
    /// @notice A dispute game type that uses an alphabet vm.
    ///         Not intended for production use.
    GameType internal constant ALPHABET = GameType.wrap(255);
    /// @notice A dispute game type that uses RISC Zero's Kailua
    GameType internal constant KAILUA = GameType.wrap(1337);
}
/// @title VMStatuses
/// @notice Named type aliases for the various valid VM status bytes.
library VMStatuses {
    /// @notice The VM has executed successfully and the outcome is valid.
    VMStatus internal constant VALID = VMStatus.wrap(0);
    /// @notice The VM has executed successfully and the outcome is invalid.
    VMStatus internal constant INVALID = VMStatus.wrap(1);
    /// @notice The VM has paniced.
    VMStatus internal constant PANIC = VMStatus.wrap(2);
    /// @notice The VM execution is still in progress.
    VMStatus internal constant UNFINISHED = VMStatus.wrap(3);
}
/// @title LocalPreimageKey
/// @notice Named type aliases for local `PreimageOracle` key identifiers.
library LocalPreimageKey {
    /// @notice The identifier for the L1 head hash.
    uint256 internal constant L1_HEAD_HASH = 0x01;
    /// @notice The identifier for the starting output root.
    uint256 internal constant STARTING_OUTPUT_ROOT = 0x02;
    /// @notice The identifier for the disputed output root.
    uint256 internal constant DISPUTED_OUTPUT_ROOT = 0x03;
    /// @notice The identifier for the disputed L2 block number.
    uint256 internal constant DISPUTED_L2_BLOCK_NUMBER = 0x04;
    /// @notice The identifier for the chain ID.
    uint256 internal constant CHAIN_ID = 0x05;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
// Contracts
import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
import { ResourceMetering } from "src/L1/ResourceMetering.sol";
// Libraries
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import { EOA } from "src/libraries/EOA.sol";
import { SafeCall } from "src/libraries/SafeCall.sol";
import { Constants } from "src/libraries/Constants.sol";
import { Types } from "src/libraries/Types.sol";
import { Hashing } from "src/libraries/Hashing.sol";
import { SecureMerkleTrie } from "src/libraries/trie/SecureMerkleTrie.sol";
import { AddressAliasHelper } from "src/vendor/AddressAliasHelper.sol";
import {
    BadTarget,
    LargeCalldata,
    SmallGasLimit,
    Unauthorized,
    CallPaused,
    GasEstimation,
    NonReentrant,
    InvalidProof,
    InvalidGameType,
    InvalidDisputeGame,
    InvalidMerkleProof,
    Blacklisted,
    Unproven,
    ProposalNotValidated,
    AlreadyFinalized,
    LegacyGame
} from "src/libraries/PortalErrors.sol";
import { GameStatus, GameType, Claim, Timestamp } from "src/dispute/lib/Types.sol";
// Interfaces
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { ISemver } from "interfaces/universal/ISemver.sol";
import { ISystemConfig } from "interfaces/L1/ISystemConfig.sol";
import { IResourceMetering } from "interfaces/L1/IResourceMetering.sol";
import { ISuperchainConfig } from "interfaces/L1/ISuperchainConfig.sol";
import { IDisputeGameFactory } from "interfaces/dispute/IDisputeGameFactory.sol";
import { IDisputeGame } from "interfaces/dispute/IDisputeGame.sol";
/// @custom:proxied true
/// @title OptimismPortal2
/// @notice The OptimismPortal is a low-level contract responsible for passing messages between L1
///         and L2. Messages sent directly to the OptimismPortal have no form of replayability.
///         Users are encouraged to use the L1CrossDomainMessenger for a higher-level interface.
contract OptimismPortal2 is Initializable, ResourceMetering, ISemver {
    /// @notice Allows for interactions with non standard ERC20 tokens.
    using SafeERC20 for IERC20;
    /// @notice Represents a proven withdrawal.
    /// @custom:field disputeGameProxy The address of the dispute game proxy that the withdrawal was proven against.
    /// @custom:field timestamp        Timestamp at which the withdrawal was proven.
    struct ProvenWithdrawal {
        IDisputeGame disputeGameProxy;
        uint64 timestamp;
    }
    /// @notice The delay between when a withdrawal transaction is proven and when it may be finalized.
    uint256 internal immutable PROOF_MATURITY_DELAY_SECONDS;
    /// @notice The delay between when a dispute game is resolved and when a withdrawal proven against it may be
    ///         finalized.
    uint256 internal immutable DISPUTE_GAME_FINALITY_DELAY_SECONDS;
    /// @notice Version of the deposit event.
    uint256 internal constant DEPOSIT_VERSION = 0;
    /// @notice The L2 gas limit set when eth is deposited using the receive() function.
    uint64 internal constant RECEIVE_DEFAULT_GAS_LIMIT = 100_000;
    /// @notice The L2 gas limit for system deposit transactions that are initiated from L1.
    uint32 internal constant SYSTEM_DEPOSIT_GAS_LIMIT = 200_000;
    /// @notice Address of the L2 account which initiated a withdrawal in this transaction.
    ///         If the of this variable is the default L2 sender address, then we are NOT inside of
    ///         a call to finalizeWithdrawalTransaction.
    address public l2Sender;
    /// @notice A list of withdrawal hashes which have been successfully finalized.
    mapping(bytes32 => bool) public finalizedWithdrawals;
    /// @custom:legacy
    /// @custom:spacer provenWithdrawals
    /// @notice Spacer taking up the legacy `provenWithdrawals` mapping slot.
    bytes32 private spacer_52_0_32;
    /// @custom:legacy
    /// @custom:spacer paused
    /// @notice Spacer for backwards compatibility.
    bool private spacer_53_0_1;
    /// @notice Contract of the Superchain Config.
    ISuperchainConfig public superchainConfig;
    /// @custom:legacy
    /// @custom:spacer l2Oracle
    /// @notice Spacer taking up the legacy `l2Oracle` address slot.
    address private spacer_54_0_20;
    /// @notice Contract of the SystemConfig.
    /// @custom:network-specific
    ISystemConfig public systemConfig;
    /// @notice Address of the DisputeGameFactory.
    /// @custom:network-specific
    IDisputeGameFactory public disputeGameFactory;
    /// @notice A mapping of withdrawal hashes to proof submitters to `ProvenWithdrawal` data.
    mapping(bytes32 => mapping(address => ProvenWithdrawal)) public provenWithdrawals;
    /// @notice A mapping of dispute game addresses to whether or not they are blacklisted.
    mapping(IDisputeGame => bool) public disputeGameBlacklist;
    /// @notice The game type that the OptimismPortal consults for output proposals.
    GameType public respectedGameType;
    /// @notice The timestamp at which the respected game type was last updated.
    uint64 public respectedGameTypeUpdatedAt;
    /// @notice Mapping of withdrawal hashes to addresses that have submitted a proof for the
    ///         withdrawal. Original OptimismPortal contract only allowed one proof to be submitted
    ///         for any given withdrawal hash. Fault Proofs version of this contract must allow
    ///         multiple proofs for the same withdrawal hash to prevent a malicious user from
    ///         blocking other withdrawals by proving them against invalid proposals. Submitters
    ///         are tracked in an array to simplify the off-chain process of determining which
    ///         proof submission should be used when finalizing a withdrawal.
    mapping(bytes32 => address[]) public proofSubmitters;
    /// @custom:legacy
    /// @custom:spacer _balance
    /// @notice Spacer taking up the legacy `_balance` slot.
    uint256 private spacer_61_0_32;
    /// @notice Emitted when a transaction is deposited from L1 to L2.
    ///         The parameters of this event are read by the rollup node and used to derive deposit
    ///         transactions on L2.
    /// @param from       Address that triggered the deposit transaction.
    /// @param to         Address that the deposit transaction is directed to.
    /// @param version    Version of this deposit transaction event.
    /// @param opaqueData ABI encoded deposit data to be parsed off-chain.
    event TransactionDeposited(address indexed from, address indexed to, uint256 indexed version, bytes opaqueData);
    /// @notice Emitted when a withdrawal transaction is proven.
    /// @param withdrawalHash Hash of the withdrawal transaction.
    /// @param from           Address that triggered the withdrawal transaction.
    /// @param to             Address that the withdrawal transaction is directed to.
    event WithdrawalProven(bytes32 indexed withdrawalHash, address indexed from, address indexed to);
    /// @notice Emitted when a withdrawal transaction is proven. Exists as a separate event to allow for backwards
    ///         compatibility for tooling that observes the `WithdrawalProven` event.
    /// @param withdrawalHash Hash of the withdrawal transaction.
    /// @param proofSubmitter Address of the proof submitter.
    event WithdrawalProvenExtension1(bytes32 indexed withdrawalHash, address indexed proofSubmitter);
    /// @notice Emitted when a withdrawal transaction is finalized.
    /// @param withdrawalHash Hash of the withdrawal transaction.
    /// @param success        Whether the withdrawal transaction was successful.
    event WithdrawalFinalized(bytes32 indexed withdrawalHash, bool success);
    /// @notice Emitted when a dispute game is blacklisted by the Guardian.
    /// @param disputeGame Address of the dispute game that was blacklisted.
    event DisputeGameBlacklisted(IDisputeGame indexed disputeGame);
    /// @notice Emitted when the Guardian changes the respected game type in the portal.
    /// @param newGameType The new respected game type.
    /// @param updatedAt   The timestamp at which the respected game type was updated.
    event RespectedGameTypeSet(GameType indexed newGameType, Timestamp indexed updatedAt);
    /// @notice Reverts when paused.
    modifier whenNotPaused() {
        if (paused()) revert CallPaused();
        _;
    }
    /// @notice Semantic version.
    /// @custom:semver 3.14.0
    function version() public pure virtual returns (string memory) {
        return "3.14.0";
    }
    /// @notice Constructs the OptimismPortal contract.
    constructor(uint256 _proofMaturityDelaySeconds, uint256 _disputeGameFinalityDelaySeconds) {
        PROOF_MATURITY_DELAY_SECONDS = _proofMaturityDelaySeconds;
        DISPUTE_GAME_FINALITY_DELAY_SECONDS = _disputeGameFinalityDelaySeconds;
        _disableInitializers();
    }
    /// @notice Initializer.
    /// @param _disputeGameFactory Contract of the DisputeGameFactory.
    /// @param _systemConfig Contract of the SystemConfig.
    /// @param _superchainConfig Contract of the SuperchainConfig.
    function initialize(
        IDisputeGameFactory _disputeGameFactory,
        ISystemConfig _systemConfig,
        ISuperchainConfig _superchainConfig,
        GameType _initialRespectedGameType
    )
        external
        initializer
    {
        disputeGameFactory = _disputeGameFactory;
        systemConfig = _systemConfig;
        superchainConfig = _superchainConfig;
        // Set the `l2Sender` slot, only if it is currently empty. This signals the first initialization of the
        // contract.
        if (l2Sender == address(0)) {
            l2Sender = Constants.DEFAULT_L2_SENDER;
            // Set the `respectedGameTypeUpdatedAt` timestamp, to ignore all games of the respected type prior
            // to this operation.
            respectedGameTypeUpdatedAt = uint64(block.timestamp);
            // Set the initial respected game type
            respectedGameType = _initialRespectedGameType;
        }
        __ResourceMetering_init();
    }
    /// @notice Getter function for the address of the guardian.
    ///         Public getter is legacy and will be removed in the future. Use `SuperchainConfig.guardian()` instead.
    /// @return Address of the guardian.
    /// @custom:legacy
    function guardian() public view returns (address) {
        return superchainConfig.guardian();
    }
    /// @notice Getter for the current paused status.
    function paused() public view returns (bool) {
        return superchainConfig.paused();
    }
    /// @notice Getter for the proof maturity delay.
    function proofMaturityDelaySeconds() public view returns (uint256) {
        return PROOF_MATURITY_DELAY_SECONDS;
    }
    /// @notice Getter for the dispute game finality delay.
    function disputeGameFinalityDelaySeconds() public view returns (uint256) {
        return DISPUTE_GAME_FINALITY_DELAY_SECONDS;
    }
    /// @notice Computes the minimum gas limit for a deposit.
    ///         The minimum gas limit linearly increases based on the size of the calldata.
    ///         This is to prevent users from creating L2 resource usage without paying for it.
    ///         This function can be used when interacting with the portal to ensure forwards
    ///         compatibility.
    /// @param _byteCount Number of bytes in the calldata.
    /// @return The minimum gas limit for a deposit.
    function minimumGasLimit(uint64 _byteCount) public pure returns (uint64) {
        return _byteCount * 40 + 21000;
    }
    /// @notice Accepts value so that users can send ETH directly to this contract and have the
    ///         funds be deposited to their address on L2. This is intended as a convenience
    ///         function for EOAs. Contracts should call the depositTransaction() function directly
    ///         otherwise any deposited funds will be lost due to address aliasing.
    receive() external payable {
        depositTransaction(msg.sender, msg.value, RECEIVE_DEFAULT_GAS_LIMIT, false, bytes(""));
    }
    /// @notice Accepts ETH value without triggering a deposit to L2.
    ///         This function mainly exists for the sake of the migration between the legacy
    ///         Optimism system and Bedrock.
    function donateETH() external payable {
        // Intentionally empty.
    }
    /// @notice Getter for the resource config.
    ///         Used internally by the ResourceMetering contract.
    ///         The SystemConfig is the source of truth for the resource config.
    /// @return config_ ResourceMetering ResourceConfig
    function _resourceConfig() internal view override returns (ResourceMetering.ResourceConfig memory config_) {
        IResourceMetering.ResourceConfig memory config = systemConfig.resourceConfig();
        assembly ("memory-safe") {
            config_ := config
        }
    }
    /// @notice Proves a withdrawal transaction.
    /// @param _tx               Withdrawal transaction to finalize.
    /// @param _disputeGameIndex Index of the dispute game to prove the withdrawal against.
    /// @param _outputRootProof  Inclusion proof of the L2ToL1MessagePasser contract's storage root.
    /// @param _withdrawalProof  Inclusion proof of the withdrawal in L2ToL1MessagePasser contract.
    function proveWithdrawalTransaction(
        Types.WithdrawalTransaction memory _tx,
        uint256 _disputeGameIndex,
        Types.OutputRootProof calldata _outputRootProof,
        bytes[] calldata _withdrawalProof
    )
        external
        whenNotPaused
    {
        // Prevent users from creating a deposit transaction where this address is the message
        // sender on L2. Because this is checked here, we do not need to check again in
        // `finalizeWithdrawalTransaction`.
        if (_tx.target == address(this)) revert BadTarget();
        // Fetch the dispute game proxy from the `DisputeGameFactory` contract.
        (GameType gameType,, IDisputeGame gameProxy) = disputeGameFactory.gameAtIndex(_disputeGameIndex);
        Claim outputRoot = gameProxy.rootClaim();
        // The game type of the dispute game must be the respected game type.
        if (gameType.raw() != respectedGameType.raw()) revert InvalidGameType();
        // The game type of the DisputeGame must have been the respected game type at creation.
        // eip150-safe
        try gameProxy.wasRespectedGameTypeWhenCreated() returns (bool wasRespected_) {
            if (!wasRespected_) revert InvalidGameType();
        } catch {
            revert LegacyGame();
        }
        // Game must have been created after the respected game type was updated. This check is a
        // strict inequality because we want to prevent users from being able to prove or finalize
        // withdrawals against games that were created in the same block that the retirement
        // timestamp was set. If the retirement timestamp and game type are changed in the same
        // block, such games could still be considered valid even if they used the old game type
        // that we intended to invalidate.
        require(
            gameProxy.createdAt().raw() > respectedGameTypeUpdatedAt,
            "OptimismPortal: dispute game created before respected game type was updated"
        );
        // Verify that the output root can be generated with the elements in the proof.
        if (outputRoot.raw() != Hashing.hashOutputRootProof(_outputRootProof)) revert InvalidProof();
        // Load the ProvenWithdrawal into memory, using the withdrawal hash as a unique identifier.
        bytes32 withdrawalHash = Hashing.hashWithdrawal(_tx);
        // We do not allow for proving withdrawals against dispute games that have resolved against the favor
        // of the root claim.
        if (gameProxy.status() == GameStatus.CHALLENGER_WINS) revert InvalidDisputeGame();
        // Compute the storage slot of the withdrawal hash in the L2ToL1MessagePasser contract.
        // Refer to the Solidity documentation for more information on how storage layouts are
        // computed for mappings.
        bytes32 storageKey = keccak256(
            abi.encode(
                withdrawalHash,
                uint256(0) // The withdrawals mapping is at the first slot in the layout.
            )
        );
        // Verify that the hash of this withdrawal was stored in the L2toL1MessagePasser contract
        // on L2. If this is true, under the assumption that the SecureMerkleTrie does not have
        // bugs, then we know that this withdrawal was actually triggered on L2 and can therefore
        // be relayed on L1.
        if (
            SecureMerkleTrie.verifyInclusionProof({
                _key: abi.encode(storageKey),
                _value: hex"01",
                _proof: _withdrawalProof,
                _root: _outputRootProof.messagePasserStorageRoot
            }) == false
        ) revert InvalidMerkleProof();
        // Designate the withdrawalHash as proven by storing the `disputeGameProxy` & `timestamp` in the
        // `provenWithdrawals` mapping. A `withdrawalHash` can only be proven once unless the dispute game it proved
        // against resolves against the favor of the root claim.
        provenWithdrawals[withdrawalHash][msg.sender] =
            ProvenWithdrawal({ disputeGameProxy: gameProxy, timestamp: uint64(block.timestamp) });
        // Emit a `WithdrawalProven` event.
        emit WithdrawalProven(withdrawalHash, _tx.sender, _tx.target);
        // Emit a `WithdrawalProvenExtension1` event.
        emit WithdrawalProvenExtension1(withdrawalHash, msg.sender);
        // Add the proof submitter to the list of proof submitters for this withdrawal hash.
        proofSubmitters[withdrawalHash].push(msg.sender);
    }
    /// @notice Finalizes a withdrawal transaction.
    /// @param _tx Withdrawal transaction to finalize.
    function finalizeWithdrawalTransaction(Types.WithdrawalTransaction memory _tx) external whenNotPaused {
        finalizeWithdrawalTransactionExternalProof(_tx, msg.sender);
    }
    /// @notice Finalizes a withdrawal transaction, using an external proof submitter.
    /// @param _tx Withdrawal transaction to finalize.
    /// @param _proofSubmitter Address of the proof submitter.
    function finalizeWithdrawalTransactionExternalProof(
        Types.WithdrawalTransaction memory _tx,
        address _proofSubmitter
    )
        public
        whenNotPaused
    {
        // Make sure that the l2Sender has not yet been set. The l2Sender is set to a value other
        // than the default value when a withdrawal transaction is being finalized. This check is
        // a defacto reentrancy guard.
        if (l2Sender != Constants.DEFAULT_L2_SENDER) revert NonReentrant();
        // Compute the withdrawal hash.
        bytes32 withdrawalHash = Hashing.hashWithdrawal(_tx);
        // Check that the withdrawal can be finalized.
        checkWithdrawal(withdrawalHash, _proofSubmitter);
        // Mark the withdrawal as finalized so it can't be replayed.
        finalizedWithdrawals[withdrawalHash] = true;
        // Set the l2Sender so contracts know who triggered this withdrawal on L2.
        l2Sender = _tx.sender;
        // Trigger the call to the target contract. We use a custom low level method
        // SafeCall.callWithMinGas to ensure two key properties
        //   1. Target contracts cannot force this call to run out of gas by returning a very large
        //      amount of data (and this is OK because we don't care about the returndata here).
        //   2. The amount of gas provided to the execution context of the target is at least the
        //      gas limit specified by the user. If there is not enough gas in the current context
        //      to accomplish this, `callWithMinGas` will revert.
        bool success = SafeCall.callWithMinGas(_tx.target, _tx.gasLimit, _tx.value, _tx.data);
        // Reset the l2Sender back to the default value.
        l2Sender = Constants.DEFAULT_L2_SENDER;
        // All withdrawals are immediately finalized. Replayability can
        // be achieved through contracts built on top of this contract
        emit WithdrawalFinalized(withdrawalHash, success);
        // Reverting here is useful for determining the exact gas cost to successfully execute the
        // sub call to the target contract if the minimum gas limit specified by the user would not
        // be sufficient to execute the sub call.
        if (!success && tx.origin == Constants.ESTIMATION_ADDRESS) {
            revert GasEstimation();
        }
    }
    /// @notice Accepts deposits of ETH and data, and emits a TransactionDeposited event for use in
    ///         deriving deposit transactions. Note that if a deposit is made by a contract, its
    ///         address will be aliased when retrieved using `tx.origin` or `msg.sender`. Consider
    ///         using the CrossDomainMessenger contracts for a simpler developer experience.
    /// @param _to         Target address on L2.
    /// @param _value      ETH value to send to the recipient.
    /// @param _gasLimit   Amount of L2 gas to purchase by burning gas on L1.
    /// @param _isCreation Whether or not the transaction is a contract creation.
    /// @param _data       Data to trigger the recipient with.
    function depositTransaction(
        address _to,
        uint256 _value,
        uint64 _gasLimit,
        bool _isCreation,
        bytes memory _data
    )
        public
        payable
        metered(_gasLimit)
    {
        // Just to be safe, make sure that people specify address(0) as the target when doing
        // contract creations.
        if (_isCreation && _to != address(0)) revert BadTarget();
        // Prevent depositing transactions that have too small of a gas limit. Users should pay
        // more for more resource usage.
        if (_gasLimit < minimumGasLimit(uint64(_data.length))) revert SmallGasLimit();
        // Prevent the creation of deposit transactions that have too much calldata. This gives an
        // upper limit on the size of unsafe blocks over the p2p network. 120kb is chosen to ensure
        // that the transaction can fit into the p2p network policy of 128kb even though deposit
        // transactions are not gossipped over the p2p network.
        if (_data.length > 120_000) revert LargeCalldata();
        // Transform the from-address to its alias if the caller is a contract.
        address from = msg.sender;
        if (!EOA.isSenderEOA()) {
            from = AddressAliasHelper.applyL1ToL2Alias(msg.sender);
        }
        // Compute the opaque data that will be emitted as part of the TransactionDeposited event.
        // We use opaque data so that we can update the TransactionDeposited event in the future
        // without breaking the current interface.
        bytes memory opaqueData = abi.encodePacked(msg.value, _value, _gasLimit, _isCreation, _data);
        // Emit a TransactionDeposited event so that the rollup node can derive a deposit
        // transaction for this deposit.
        emit TransactionDeposited(from, _to, DEPOSIT_VERSION, opaqueData);
    }
    /// @notice Blacklists a dispute game. Should only be used in the event that a dispute game resolves incorrectly.
    /// @param _disputeGame Dispute game to blacklist.
    function blacklistDisputeGame(IDisputeGame _disputeGame) external {
        if (msg.sender != guardian()) revert Unauthorized();
        disputeGameBlacklist[_disputeGame] = true;
        emit DisputeGameBlacklisted(_disputeGame);
    }
    /// @notice Sets the respected game type. Changing this value can alter the security properties of the system,
    ///         depending on the new game's behavior.
    /// @param _gameType The game type to consult for output proposals.
    function setRespectedGameType(GameType _gameType) external {
        if (msg.sender != guardian()) revert Unauthorized();
        // respectedGameTypeUpdatedAt is now no longer set by default. We want to avoid modifying
        // this function's signature as that would result in changes to the DeputyGuardianModule.
        // We use type(uint32).max as a temporary solution to allow us to update the
        // respectedGameTypeUpdatedAt timestamp without modifying this function's signature.
        if (_gameType.raw() == type(uint32).max) {
            respectedGameTypeUpdatedAt = uint64(block.timestamp);
        } else {
            respectedGameType = _gameType;
        }
        emit RespectedGameTypeSet(respectedGameType, Timestamp.wrap(respectedGameTypeUpdatedAt));
    }
    /// @notice Checks if a withdrawal can be finalized. This function will revert if the withdrawal cannot be
    ///         finalized, and otherwise has no side-effects.
    /// @param _withdrawalHash Hash of the withdrawal to check.
    /// @param _proofSubmitter The submitter of the proof for the withdrawal hash
    function checkWithdrawal(bytes32 _withdrawalHash, address _proofSubmitter) public view {
        ProvenWithdrawal memory provenWithdrawal = provenWithdrawals[_withdrawalHash][_proofSubmitter];
        IDisputeGame disputeGameProxy = provenWithdrawal.disputeGameProxy;
        // The dispute game must not be blacklisted.
        if (disputeGameBlacklist[disputeGameProxy]) revert Blacklisted();
        // A withdrawal can only be finalized if it has been proven. We know that a withdrawal has
        // been proven at least once when its timestamp is non-zero. Unproven withdrawals will have
        // a timestamp of zero.
        if (provenWithdrawal.timestamp == 0) revert Unproven();
        // Grab the createdAt timestamp once.
        uint64 createdAt = disputeGameProxy.createdAt().raw();
        // As a sanity check, we make sure that the proven withdrawal's timestamp is greater than
        // starting timestamp inside the Dispute Game. Not strictly necessary but extra layer of
        // safety against weird bugs in the proving step.
        require(
            provenWithdrawal.timestamp > createdAt,
            "OptimismPortal: withdrawal timestamp less than dispute game creation timestamp"
        );
        // A proven withdrawal must wait at least `PROOF_MATURITY_DELAY_SECONDS` before finalizing.
        require(
            block.timestamp - provenWithdrawal.timestamp > PROOF_MATURITY_DELAY_SECONDS,
            "OptimismPortal: proven withdrawal has not matured yet"
        );
        // A proven withdrawal must wait until the dispute game it was proven against has been
        // resolved in favor of the root claim (the output proposal). This is to prevent users
        // from finalizing withdrawals proven against non-finalized output roots.
        if (disputeGameProxy.status() != GameStatus.DEFENDER_WINS) revert ProposalNotValidated();
        // The game type of the dispute game must have been the respected game type at creation
        // time. We check that the game type is the respected game type at proving time, but it's
        // possible that the respected game type has since changed. Users can still use this game
        // to finalize a withdrawal as long as it has not been otherwise invalidated.
        // The game type of the DisputeGame must have been the respected game type at creation.
        // eip150-safe
        try disputeGameProxy.wasRespectedGameTypeWhenCreated() returns (bool wasRespected_) {
            if (!wasRespected_) revert InvalidGameType();
        } catch {
            revert LegacyGame();
        }
        // Game must have been created after the respected game type was updated. This check is a
        // strict inequality because we want to prevent users from being able to prove or finalize
        // withdrawals against games that were created in the same block that the retirement
        // timestamp was set. If the retirement timestamp and game type are changed in the same
        // block, such games could still be considered valid even if they used the old game type
        // that we intended to invalidate.
        require(
            createdAt > respectedGameTypeUpdatedAt,
            "OptimismPortal: dispute game created before respected game type was updated"
        );
        // Before a withdrawal can be finalized, the dispute game it was proven against must have been
        // resolved for at least `DISPUTE_GAME_FINALITY_DELAY_SECONDS`. This is to allow for manual
        // intervention in the event that a dispute game is resolved incorrectly.
        require(
            block.timestamp - disputeGameProxy.resolvedAt().raw() > DISPUTE_GAME_FINALITY_DELAY_SECONDS,
            "OptimismPortal: output proposal in air-gap"
        );
        // Check that this withdrawal has not already been finalized, this is replay protection.
        if (finalizedWithdrawals[_withdrawalHash]) revert AlreadyFinalized();
    }
    /// @notice External getter for the number of proof submitters for a withdrawal hash.
    /// @param _withdrawalHash Hash of the withdrawal.
    /// @return The number of proof submitters for the withdrawal hash.
    function numProofSubmitters(bytes32 _withdrawalHash) external view returns (uint256) {
        return proofSubmitters[_withdrawalHash].length;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/Address.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts. Equivalent to `reinitializer(1)`.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!Address.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * `initializer` is equivalent to `reinitializer(1)`, so a reinitializer may be used after the original
     * initialization step. This is essential to configure modules that are added through upgrades and that require
     * initialization.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized < type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
// Contracts
import { Initializable } from "@openzeppelin/contracts/proxy/utils/Initializable.sol";
// Libraries
import { Math } from "@openzeppelin/contracts/utils/math/Math.sol";
import { Burn } from "src/libraries/Burn.sol";
import { Arithmetic } from "src/libraries/Arithmetic.sol";
/// @custom:upgradeable
/// @title ResourceMetering
/// @notice ResourceMetering implements an EIP-1559 style resource metering system where pricing
///         updates automatically based on current demand.
abstract contract ResourceMetering is Initializable {
    /// @notice Error returned when too much gas resource is consumed.
    error OutOfGas();
    /// @notice Represents the various parameters that control the way in which resources are
    ///         metered. Corresponds to the EIP-1559 resource metering system.
    /// @custom:field prevBaseFee   Base fee from the previous block(s).
    /// @custom:field prevBoughtGas Amount of gas bought so far in the current block.
    /// @custom:field prevBlockNum  Last block number that the base fee was updated.
    struct ResourceParams {
        uint128 prevBaseFee;
        uint64 prevBoughtGas;
        uint64 prevBlockNum;
    }
    /// @notice Represents the configuration for the EIP-1559 based curve for the deposit gas
    ///         market. These values should be set with care as it is possible to set them in
    ///         a way that breaks the deposit gas market. The target resource limit is defined as
    ///         maxResourceLimit / elasticityMultiplier. This struct was designed to fit within a
    ///         single word. There is additional space for additions in the future.
    /// @custom:field maxResourceLimit             Represents the maximum amount of deposit gas that
    ///                                            can be purchased per block.
    /// @custom:field elasticityMultiplier         Determines the target resource limit along with
    ///                                            the resource limit.
    /// @custom:field baseFeeMaxChangeDenominator  Determines max change on fee per block.
    /// @custom:field minimumBaseFee               The min deposit base fee, it is clamped to this
    ///                                            value.
    /// @custom:field systemTxMaxGas               The amount of gas supplied to the system
    ///                                            transaction. This should be set to the same
    ///                                            number that the op-node sets as the gas limit
    ///                                            for the system transaction.
    /// @custom:field maximumBaseFee               The max deposit base fee, it is clamped to this
    ///                                            value.
    struct ResourceConfig {
        uint32 maxResourceLimit;
        uint8 elasticityMultiplier;
        uint8 baseFeeMaxChangeDenominator;
        uint32 minimumBaseFee;
        uint32 systemTxMaxGas;
        uint128 maximumBaseFee;
    }
    /// @notice EIP-1559 style gas parameters.
    ResourceParams public params;
    /// @notice Reserve extra slots (to a total of 50) in the storage layout for future upgrades.
    uint256[48] private __gap;
    /// @notice Meters access to a function based an amount of a requested resource.
    /// @param _amount Amount of the resource requested.
    modifier metered(uint64 _amount) {
        // Record initial gas amount so we can refund for it later.
        uint256 initialGas = gasleft();
        // Run the underlying function.
        _;
        // Run the metering function.
        _metered(_amount, initialGas);
    }
    /// @notice An internal function that holds all of the logic for metering a resource.
    /// @param _amount     Amount of the resource requested.
    /// @param _initialGas The amount of gas before any modifier execution.
    function _metered(uint64 _amount, uint256 _initialGas) internal {
        // Update block number and base fee if necessary.
        uint256 blockDiff = block.number - params.prevBlockNum;
        ResourceConfig memory config = _resourceConfig();
        int256 targetResourceLimit =
            int256(uint256(config.maxResourceLimit)) / int256(uint256(config.elasticityMultiplier));
        if (blockDiff > 0) {
            // Handle updating EIP-1559 style gas parameters. We use EIP-1559 to restrict the rate
            // at which deposits can be created and therefore limit the potential for deposits to
            // spam the L2 system. Fee scheme is very similar to EIP-1559 with minor changes.
            int256 gasUsedDelta = int256(uint256(params.prevBoughtGas)) - targetResourceLimit;
            int256 baseFeeDelta = (int256(uint256(params.prevBaseFee)) * gasUsedDelta)
                / (targetResourceLimit * int256(uint256(config.baseFeeMaxChangeDenominator)));
            // Update base fee by adding the base fee delta and clamp the resulting value between
            // min and max.
            int256 newBaseFee = Arithmetic.clamp({
                _value: int256(uint256(params.prevBaseFee)) + baseFeeDelta,
                _min: int256(uint256(config.minimumBaseFee)),
                _max: int256(uint256(config.maximumBaseFee))
            });
            // If we skipped more than one block, we also need to account for every empty block.
            // Empty block means there was no demand for deposits in that block, so we should
            // reflect this lack of demand in the fee.
            if (blockDiff > 1) {
                // Update the base fee by repeatedly applying the exponent 1-(1/change_denominator)
                // blockDiff - 1 times. Simulates multiple empty blocks. Clamp the resulting value
                // between min and max.
                newBaseFee = Arithmetic.clamp({
                    _value: Arithmetic.cdexp({
                        _coefficient: newBaseFee,
                        _denominator: int256(uint256(config.baseFeeMaxChangeDenominator)),
                        _exponent: int256(blockDiff - 1)
                    }),
                    _min: int256(uint256(config.minimumBaseFee)),
                    _max: int256(uint256(config.maximumBaseFee))
                });
            }
            // Update new base fee, reset bought gas, and update block number.
            params.prevBaseFee = uint128(uint256(newBaseFee));
            params.prevBoughtGas = 0;
            params.prevBlockNum = uint64(block.number);
        }
        // Make sure we can actually buy the resource amount requested by the user.
        params.prevBoughtGas += _amount;
        if (int256(uint256(params.prevBoughtGas)) > int256(uint256(config.maxResourceLimit))) {
            revert OutOfGas();
        }
        // Determine the amount of ETH to be paid.
        uint256 resourceCost = uint256(_amount) * uint256(params.prevBaseFee);
        // We currently charge for this ETH amount as an L1 gas burn, so we convert the ETH amount
        // into gas by dividing by the L1 base fee. We assume a minimum base fee of 1 gwei to avoid
        // division by zero for L1s that don't support 1559 or to avoid excessive gas burns during
        // periods of extremely low L1 demand. One-day average gas fee hasn't dipped below 1 gwei
        // during any 1 day period in the last 5 years, so should be fine.
        uint256 gasCost = resourceCost / Math.max(block.basefee, 1 gwei);
        // Give the user a refund based on the amount of gas they used to do all of the work up to
        // this point. Since we're at the end of the modifier, this should be pretty accurate. Acts
        // effectively like a dynamic stipend (with a minimum value).
        uint256 usedGas = _initialGas - gasleft();
        if (gasCost > usedGas) {
            Burn.gas(gasCost - usedGas);
        }
    }
    /// @notice Adds an amount of L2 gas consumed to the prev bought gas params. This is meant to be used
    ///         when L2 system transactions are generated from L1.
    /// @param _amount Amount of the L2 gas resource requested.
    function useGas(uint32 _amount) internal {
        params.prevBoughtGas += uint64(_amount);
    }
    /// @notice Virtual function that returns the resource config.
    ///         Contracts that inherit this contract must implement this function.
    /// @return ResourceConfig
    function _resourceConfig() internal virtual returns (ResourceConfig memory);
    /// @notice Sets initial resource parameter values.
    ///         This function must either be called by the initializer function of an upgradeable
    ///         child contract.
    function __ResourceMetering_init() internal onlyInitializing {
        if (params.prevBlockNum == 0) {
            params = ResourceParams({ prevBaseFee: 1 gwei, prevBoughtGas: 0, prevBlockNum: uint64(block.number) });
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;
    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title EOA
/// @notice A library for detecting if an address is an EOA.
library EOA {
    /// @notice Returns true if sender address is an EOA.
    /// @return isEOA_ True if the sender address is an EOA.
    function isSenderEOA() internal view returns (bool isEOA_) {
        if (msg.sender == tx.origin) {
            isEOA_ = true;
        } else if (address(msg.sender).code.length == 23) {
            // If the sender is not the origin, check for 7702 delegated EOAs.
            assembly {
                let ptr := mload(0x40)
                mstore(0x40, add(ptr, 0x20))
                extcodecopy(caller(), ptr, 0, 0x20)
                isEOA_ := eq(shr(232, mload(ptr)), 0xEF0100)
            }
        } else {
            // If more or less than 23 bytes of code, not a 7702 delegated EOA.
            isEOA_ = false;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title SafeCall
/// @notice Perform low level safe calls
library SafeCall {
    /// @notice Performs a low level call without copying any returndata.
    /// @dev Passes no calldata to the call context.
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _gas, uint256 _value) internal returns (bool success_) {
        assembly {
            success_ :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    0, // inloc
                    0, // inlen
                    0, // outloc
                    0 // outlen
                )
        }
    }
    /// @notice Perform a low level call with all gas without copying any returndata
    /// @param _target   Address to call
    /// @param _value    Amount of value to pass to the call
    function send(address _target, uint256 _value) internal returns (bool success_) {
        success_ = send(_target, gasleft(), _value);
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _gas      Amount of gas to pass to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(
        address _target,
        uint256 _gas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool success_)
    {
        assembly {
            success_ :=
                call(
                    _gas, // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0, // outloc
                    0 // outlen
                )
        }
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, uint256 _value, bytes memory _calldata) internal returns (bool success_) {
        success_ = call({ _target: _target, _gas: gasleft(), _value: _value, _calldata: _calldata });
    }
    /// @notice Perform a low level call without copying any returndata
    /// @param _target   Address to call
    /// @param _calldata Calldata to pass to the call
    function call(address _target, bytes memory _calldata) internal returns (bool success_) {
        success_ = call({ _target: _target, _gas: gasleft(), _value: 0, _calldata: _calldata });
    }
    /// @notice Helper function to determine if there is sufficient gas remaining within the context
    ///         to guarantee that the minimum gas requirement for a call will be met as well as
    ///         optionally reserving a specified amount of gas for after the call has concluded.
    /// @param _minGas      The minimum amount of gas that may be passed to the target context.
    /// @param _reservedGas Optional amount of gas to reserve for the caller after the execution
    ///                     of the target context.
    /// @return `true` if there is enough gas remaining to safely supply `_minGas` to the target
    ///         context as well as reserve `_reservedGas` for the caller after the execution of
    ///         the target context.
    /// @dev !!!!! FOOTGUN ALERT !!!!!
    ///      1.) The 40_000 base buffer is to account for the worst case of the dynamic cost of the
    ///          `CALL` opcode's `address_access_cost`, `positive_value_cost`, and
    ///          `value_to_empty_account_cost` factors with an added buffer of 5,700 gas. It is
    ///          still possible to self-rekt by initiating a withdrawal with a minimum gas limit
    ///          that does not account for the `memory_expansion_cost` & `code_execution_cost`
    ///          factors of the dynamic cost of the `CALL` opcode.
    ///      2.) This function should *directly* precede the external call if possible. There is an
    ///          added buffer to account for gas consumed between this check and the call, but it
    ///          is only 5,700 gas.
    ///      3.) Because EIP-150 ensures that a maximum of 63/64ths of the remaining gas in the call
    ///          frame may be passed to a subcontext, we need to ensure that the gas will not be
    ///          truncated.
    ///      4.) Use wisely. This function is not a silver bullet.
    function hasMinGas(uint256 _minGas, uint256 _reservedGas) internal view returns (bool) {
        bool _hasMinGas;
        assembly {
            // Equation: gas × 63 ≥ minGas × 64 + 63(40_000 + reservedGas)
            _hasMinGas := iszero(lt(mul(gas(), 63), add(mul(_minGas, 64), mul(add(40000, _reservedGas), 63))))
        }
        return _hasMinGas;
    }
    /// @notice Perform a low level call without copying any returndata. This function
    ///         will revert if the call cannot be performed with the specified minimum
    ///         gas.
    /// @param _target   Address to call
    /// @param _minGas   The minimum amount of gas that may be passed to the call
    /// @param _value    Amount of value to pass to the call
    /// @param _calldata Calldata to pass to the call
    function callWithMinGas(
        address _target,
        uint256 _minGas,
        uint256 _value,
        bytes memory _calldata
    )
        internal
        returns (bool)
    {
        bool _success;
        bool _hasMinGas = hasMinGas(_minGas, 0);
        assembly {
            // Assertion: gasleft() >= (_minGas * 64) / 63 + 40_000
            if iszero(_hasMinGas) {
                // Store the "Error(string)" selector in scratch space.
                mstore(0, 0x08c379a0)
                // Store the pointer to the string length in scratch space.
                mstore(32, 32)
                // Store the string.
                //
                // SAFETY:
                // - We pad the beginning of the string with two zero bytes as well as the
                // length (24) to ensure that we override the free memory pointer at offset
                // 0x40. This is necessary because the free memory pointer is likely to
                // be greater than 1 byte when this function is called, but it is incredibly
                // unlikely that it will be greater than 3 bytes. As for the data within
                // 0x60, it is ensured that it is 0 due to 0x60 being the zero offset.
                // - It's fine to clobber the free memory pointer, we're reverting.
                mstore(88, 0x0000185361666543616c6c3a204e6f7420656e6f75676820676173)
                // Revert with 'Error("SafeCall: Not enough gas")'
                revert(28, 100)
            }
            // The call will be supplied at least ((_minGas * 64) / 63) gas due to the
            // above assertion. This ensures that, in all circumstances (except for when the
            // `_minGas` does not account for the `memory_expansion_cost` and `code_execution_cost`
            // factors of the dynamic cost of the `CALL` opcode), the call will receive at least
            // the minimum amount of gas specified.
            _success :=
                call(
                    gas(), // gas
                    _target, // recipient
                    _value, // ether value
                    add(_calldata, 32), // inloc
                    mload(_calldata), // inlen
                    0x00, // outloc
                    0x00 // outlen
                )
        }
        return _success;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Interfaces
import { IResourceMetering } from "interfaces/L1/IResourceMetering.sol";
/// @title Constants
/// @notice Constants is a library for storing constants. Simple! Don't put everything in here, just
///         the stuff used in multiple contracts. Constants that only apply to a single contract
///         should be defined in that contract instead.
library Constants {
    /// @notice Special address to be used as the tx origin for gas estimation calls in the
    ///         OptimismPortal and CrossDomainMessenger calls. You only need to use this address if
    ///         the minimum gas limit specified by the user is not actually enough to execute the
    ///         given message and you're attempting to estimate the actual necessary gas limit. We
    ///         use address(1) because it's the ecrecover precompile and therefore guaranteed to
    ///         never have any code on any EVM chain.
    address internal constant ESTIMATION_ADDRESS = address(1);
    /// @notice Value used for the L2 sender storage slot in both the OptimismPortal and the
    ///         CrossDomainMessenger contracts before an actual sender is set. This value is
    ///         non-zero to reduce the gas cost of message passing transactions.
    address internal constant DEFAULT_L2_SENDER = 0x000000000000000000000000000000000000dEaD;
    /// @notice The storage slot that holds the address of a proxy implementation.
    /// @dev `bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)`
    bytes32 internal constant PROXY_IMPLEMENTATION_ADDRESS =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /// @notice The storage slot that holds the address of the owner.
    /// @dev `bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)`
    bytes32 internal constant PROXY_OWNER_ADDRESS = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /// @notice The address that represents ether when dealing with ERC20 token addresses.
    address internal constant ETHER = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    /// @notice The address that represents the system caller responsible for L1 attributes
    ///         transactions.
    address internal constant DEPOSITOR_ACCOUNT = 0xDeaDDEaDDeAdDeAdDEAdDEaddeAddEAdDEAd0001;
    /// @notice Returns the default values for the ResourceConfig. These are the recommended values
    ///         for a production network.
    function DEFAULT_RESOURCE_CONFIG() internal pure returns (IResourceMetering.ResourceConfig memory) {
        IResourceMetering.ResourceConfig memory config = IResourceMetering.ResourceConfig({
            maxResourceLimit: 20_000_000,
            elasticityMultiplier: 10,
            baseFeeMaxChangeDenominator: 8,
            minimumBaseFee: 1 gwei,
            systemTxMaxGas: 1_000_000,
            maximumBaseFee: type(uint128).max
        });
        return config;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Types
/// @notice Contains various types used throughout the Optimism contract system.
library Types {
    /// @notice OutputProposal represents a commitment to the L2 state. The timestamp is the L1
    ///         timestamp that the output root is posted. This timestamp is used to verify that the
    ///         finalization period has passed since the output root was submitted.
    /// @custom:field outputRoot    Hash of the L2 output.
    /// @custom:field timestamp     Timestamp of the L1 block that the output root was submitted in.
    /// @custom:field l2BlockNumber L2 block number that the output corresponds to.
    struct OutputProposal {
        bytes32 outputRoot;
        uint128 timestamp;
        uint128 l2BlockNumber;
    }
    /// @notice Struct representing the elements that are hashed together to generate an output root
    ///         which itself represents a snapshot of the L2 state.
    /// @custom:field version                  Version of the output root.
    /// @custom:field stateRoot                Root of the state trie at the block of this output.
    /// @custom:field messagePasserStorageRoot Root of the message passer storage trie.
    /// @custom:field latestBlockhash          Hash of the block this output was generated from.
    struct OutputRootProof {
        bytes32 version;
        bytes32 stateRoot;
        bytes32 messagePasserStorageRoot;
        bytes32 latestBlockhash;
    }
    /// @notice Struct representing a deposit transaction (L1 => L2 transaction) created by an end
    ///         user (as opposed to a system deposit transaction generated by the system).
    /// @custom:field from        Address of the sender of the transaction.
    /// @custom:field to          Address of the recipient of the transaction.
    /// @custom:field isCreation  True if the transaction is a contract creation.
    /// @custom:field value       Value to send to the recipient.
    /// @custom:field mint        Amount of ETH to mint.
    /// @custom:field gasLimit    Gas limit of the transaction.
    /// @custom:field data        Data of the transaction.
    /// @custom:field l1BlockHash Hash of the block the transaction was submitted in.
    /// @custom:field logIndex    Index of the log in the block the transaction was submitted in.
    struct UserDepositTransaction {
        address from;
        address to;
        bool isCreation;
        uint256 value;
        uint256 mint;
        uint64 gasLimit;
        bytes data;
        bytes32 l1BlockHash;
        uint256 logIndex;
    }
    /// @notice Struct representing a withdrawal transaction.
    /// @custom:field nonce    Nonce of the withdrawal transaction
    /// @custom:field sender   Address of the sender of the transaction.
    /// @custom:field target   Address of the recipient of the transaction.
    /// @custom:field value    Value to send to the recipient.
    /// @custom:field gasLimit Gas limit of the transaction.
    /// @custom:field data     Data of the transaction.
    struct WithdrawalTransaction {
        uint256 nonce;
        address sender;
        address target;
        uint256 value;
        uint256 gasLimit;
        bytes data;
    }
    /// @notice Enum representing where the FeeVault withdraws funds to.
    /// @custom:value L1 FeeVault withdraws funds to L1.
    /// @custom:value L2 FeeVault withdraws funds to L2.
    enum WithdrawalNetwork {
        L1,
        L2
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { Types } from "src/libraries/Types.sol";
import { Encoding } from "src/libraries/Encoding.sol";
/// @title Hashing
/// @notice Hashing handles Optimism's various different hashing schemes.
library Hashing {
    /// @notice Computes the hash of the RLP encoded L2 transaction that would be generated when a
    ///         given deposit is sent to the L2 system. Useful for searching for a deposit in the L2
    ///         system.
    /// @param _tx User deposit transaction to hash.
    /// @return Hash of the RLP encoded L2 deposit transaction.
    function hashDepositTransaction(Types.UserDepositTransaction memory _tx) internal pure returns (bytes32) {
        return keccak256(Encoding.encodeDepositTransaction(_tx));
    }
    /// @notice Computes the deposit transaction's "source hash", a value that guarantees the hash
    ///         of the L2 transaction that corresponds to a deposit is unique and is
    ///         deterministically generated from L1 transaction data.
    /// @param _l1BlockHash Hash of the L1 block where the deposit was included.
    /// @param _logIndex    The index of the log that created the deposit transaction.
    /// @return Hash of the deposit transaction's "source hash".
    function hashDepositSource(bytes32 _l1BlockHash, uint256 _logIndex) internal pure returns (bytes32) {
        bytes32 depositId = keccak256(abi.encode(_l1BlockHash, _logIndex));
        return keccak256(abi.encode(bytes32(0), depositId));
    }
    /// @notice Hashes the cross domain message based on the version that is encoded into the
    ///         message nonce.
    /// @param _nonce    Message nonce with version encoded into the first two bytes.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes32)
    {
        (, uint16 version) = Encoding.decodeVersionedNonce(_nonce);
        if (version == 0) {
            return hashCrossDomainMessageV0(_target, _sender, _data, _nonce);
        } else if (version == 1) {
            return hashCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data);
        } else {
            revert("Hashing: unknown cross domain message version");
        }
    }
    /// @notice Hashes a cross domain message based on the V0 (legacy) encoding.
    /// @param _target Address of the target of the message.
    /// @param _sender Address of the sender of the message.
    /// @param _data   Data to send with the message.
    /// @param _nonce  Message nonce.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessageV0(
        address _target,
        address _sender,
        bytes memory _data,
        uint256 _nonce
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(Encoding.encodeCrossDomainMessageV0(_target, _sender, _data, _nonce));
    }
    /// @notice Hashes a cross domain message based on the V1 (current) encoding.
    /// @param _nonce    Message nonce.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Hashed cross domain message.
    function hashCrossDomainMessageV1(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(Encoding.encodeCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data));
    }
    /// @notice Derives the withdrawal hash according to the encoding in the L2 Withdrawer contract
    /// @param _tx Withdrawal transaction to hash.
    /// @return Hashed withdrawal transaction.
    function hashWithdrawal(Types.WithdrawalTransaction memory _tx) internal pure returns (bytes32) {
        return keccak256(abi.encode(_tx.nonce, _tx.sender, _tx.target, _tx.value, _tx.gasLimit, _tx.data));
    }
    /// @notice Hashes the various elements of an output root proof into an output root hash which
    ///         can be used to check if the proof is valid.
    /// @param _outputRootProof Output root proof which should hash to an output root.
    /// @return Hashed output root proof.
    function hashOutputRootProof(Types.OutputRootProof memory _outputRootProof) internal pure returns (bytes32) {
        return keccak256(
            abi.encode(
                _outputRootProof.version,
                _outputRootProof.stateRoot,
                _outputRootProof.messagePasserStorageRoot,
                _outputRootProof.latestBlockhash
            )
        );
    }
    /// @notice Generates a unique hash for cross l2 messages. This hash is used to identify
    ///         the message and ensure it is not relayed more than once.
    /// @param _destination Chain ID of the destination chain.
    /// @param _source Chain ID of the source chain.
    /// @param _nonce Unique nonce associated with the message to prevent replay attacks.
    /// @param _sender Address of the user who originally sent the message.
    /// @param _target Address of the contract or wallet that the message is targeting on the destination chain.
    /// @param _message The message payload to be relayed to the target on the destination chain.
    /// @return Hash of the encoded message parameters, used to uniquely identify the message.
    function hashL2toL2CrossDomainMessage(
        uint256 _destination,
        uint256 _source,
        uint256 _nonce,
        address _sender,
        address _target,
        bytes memory _message
    )
        internal
        pure
        returns (bytes32)
    {
        return keccak256(abi.encode(_destination, _source, _nonce, _sender, _target, _message));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { MerkleTrie } from "src/libraries/trie/MerkleTrie.sol";
/// @title SecureMerkleTrie
/// @notice SecureMerkleTrie is a thin wrapper around the MerkleTrie library that hashes the input
///         keys. Ethereum's state trie hashes input keys before storing them.
library SecureMerkleTrie {
    /// @notice Verifies a proof that a given key/value pair is present in the Merkle trie.
    /// @param _key   Key of the node to search for, as a hex string.
    /// @param _value Value of the node to search for, as a hex string.
    /// @param _proof Merkle trie inclusion proof for the desired node. Unlike traditional Merkle
    ///               trees, this proof is executed top-down and consists of a list of RLP-encoded
    ///               nodes that make a path down to the target node.
    /// @param _root  Known root of the Merkle trie. Used to verify that the included proof is
    ///               correctly constructed.
    /// @return valid_ Whether or not the proof is valid.
    function verifyInclusionProof(
        bytes memory _key,
        bytes memory _value,
        bytes[] memory _proof,
        bytes32 _root
    )
        internal
        pure
        returns (bool valid_)
    {
        bytes memory key = _getSecureKey(_key);
        valid_ = MerkleTrie.verifyInclusionProof(key, _value, _proof, _root);
    }
    /// @notice Retrieves the value associated with a given key.
    /// @param _key   Key to search for, as hex bytes.
    /// @param _proof Merkle trie inclusion proof for the key.
    /// @param _root  Known root of the Merkle trie.
    /// @return value_ Value of the key if it exists.
    function get(bytes memory _key, bytes[] memory _proof, bytes32 _root) internal pure returns (bytes memory value_) {
        bytes memory key = _getSecureKey(_key);
        value_ = MerkleTrie.get(key, _proof, _root);
    }
    /// @notice Computes the hashed version of the input key.
    /// @param _key Key to hash.
    /// @return hash_ Hashed version of the key.
    function _getSecureKey(bytes memory _key) private pure returns (bytes memory hash_) {
        hash_ = abi.encodePacked(keccak256(_key));
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
 * Copyright 2019-2021, Offchain Labs, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity ^0.8.0;
library AddressAliasHelper {
    uint160 constant offset = uint160(0x1111000000000000000000000000000000001111);
    /// @notice Utility function that converts the address in the L1 that submitted a tx to
    /// the inbox to the msg.sender viewed in the L2
    /// @param l1Address the address in the L1 that triggered the tx to L2
    /// @return l2Address L2 address as viewed in msg.sender
    function applyL1ToL2Alias(address l1Address) internal pure returns (address l2Address) {
        unchecked {
            l2Address = address(uint160(l1Address) + offset);
        }
    }
    /// @notice Utility function that converts the msg.sender viewed in the L2 to the
    /// address in the L1 that submitted a tx to the inbox
    /// @param l2Address L2 address as viewed in msg.sender
    /// @return l1Address the address in the L1 that triggered the tx to L2
    function undoL1ToL2Alias(address l2Address) internal pure returns (address l1Address) {
        unchecked {
            l1Address = address(uint160(l2Address) - offset);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice Error for when a deposit or withdrawal is to a bad target.
error BadTarget();
/// @notice Error for when a deposit has too much calldata.
error LargeCalldata();
/// @notice Error for when a deposit has too small of a gas limit.
error SmallGasLimit();
/// @notice Error for when a withdrawal transfer fails.
error TransferFailed();
/// @notice Error for when a method cannot be called with non zero CALLVALUE.
error NoValue();
/// @notice Error for an unauthorized CALLER.
error Unauthorized();
/// @notice Error for when a method cannot be called when paused. This could be renamed
///         to `Paused` in the future, but it collides with the `Paused` event.
error CallPaused();
/// @notice Error for special gas estimation.
error GasEstimation();
/// @notice Error for when a method is being reentered.
error NonReentrant();
/// @notice Error for invalid proof.
error InvalidProof();
/// @notice Error for invalid game type.
error InvalidGameType();
/// @notice Error for an invalid dispute game.
error InvalidDisputeGame();
/// @notice Error for an invalid merkle proof.
error InvalidMerkleProof();
/// @notice Error for when a dispute game has been blacklisted.
error Blacklisted();
/// @notice Error for when trying to withdrawal without first proven.
error Unproven();
/// @notice Error for when a proposal is not validated.
error ProposalNotValidated();
/// @notice Error for when a withdrawal has already been finalized.
error AlreadyFinalized();
/// @notice Error for when a game is a legacy game.
error LegacyGame();
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;
// Libraries
import {
    Position,
    Hash,
    GameType,
    VMStatus,
    Timestamp,
    Duration,
    Clock,
    GameId,
    Claim,
    LibGameId,
    LibClock
} from "src/dispute/lib/LibUDT.sol";
/// @notice The current status of the dispute game.
enum GameStatus {
    // The game is currently in progress, and has not been resolved.
    IN_PROGRESS,
    // The game has concluded, and the `rootClaim` was challenged successfully.
    CHALLENGER_WINS,
    // The game has concluded, and the `rootClaim` could not be contested.
    DEFENDER_WINS
}
/// @notice The game's bond distribution type. Games are expected to start in the `UNDECIDED`
///         state, and then choose either `NORMAL` or `REFUND`.
enum BondDistributionMode {
    // Bond distribution strategy has not been chosen.
    UNDECIDED,
    // Bonds should be distributed as normal.
    NORMAL,
    // Bonds should be refunded to claimants.
    REFUND
}
/// @notice Represents an L2 output root and the L2 block number at which it was generated.
/// @custom:field root The output root.
/// @custom:field l2BlockNumber The L2 block number at which the output root was generated.
struct OutputRoot {
    Hash root;
    uint256 l2BlockNumber;
}
/// @title GameTypes
/// @notice A library that defines the IDs of games that can be played.
library GameTypes {
    /// @dev A dispute game type the uses the cannon vm.
    GameType internal constant CANNON = GameType.wrap(0);
    /// @dev A permissioned dispute game type that uses the cannon vm.
    GameType internal constant PERMISSIONED_CANNON = GameType.wrap(1);
    /// @notice A dispute game type that uses the asterisc vm.
    GameType internal constant ASTERISC = GameType.wrap(2);
    /// @notice A dispute game type that uses the asterisc vm with Kona.
    GameType internal constant ASTERISC_KONA = GameType.wrap(3);
    /// @notice A dispute game type that uses OP Succinct
    GameType internal constant OP_SUCCINCT = GameType.wrap(6);
    /// @notice A dispute game type with short game duration for testing withdrawals.
    ///         Not intended for production use.
    GameType internal constant FAST = GameType.wrap(254);
    /// @notice A dispute game type that uses an alphabet vm.
    ///         Not intended for production use.
    GameType internal constant ALPHABET = GameType.wrap(255);
    /// @notice A dispute game type that uses RISC Zero's Kailua
    GameType internal constant KAILUA = GameType.wrap(1337);
}
/// @title VMStatuses
/// @notice Named type aliases for the various valid VM status bytes.
library VMStatuses {
    /// @notice The VM has executed successfully and the outcome is valid.
    VMStatus internal constant VALID = VMStatus.wrap(0);
    /// @notice The VM has executed successfully and the outcome is invalid.
    VMStatus internal constant INVALID = VMStatus.wrap(1);
    /// @notice The VM has paniced.
    VMStatus internal constant PANIC = VMStatus.wrap(2);
    /// @notice The VM execution is still in progress.
    VMStatus internal constant UNFINISHED = VMStatus.wrap(3);
}
/// @title LocalPreimageKey
/// @notice Named type aliases for local `PreimageOracle` key identifiers.
library LocalPreimageKey {
    /// @notice The identifier for the L1 head hash.
    uint256 internal constant L1_HEAD_HASH = 0x01;
    /// @notice The identifier for the starting output root.
    uint256 internal constant STARTING_OUTPUT_ROOT = 0x02;
    /// @notice The identifier for the disputed output root.
    uint256 internal constant DISPUTED_OUTPUT_ROOT = 0x03;
    /// @notice The identifier for the disputed L2 block number.
    uint256 internal constant DISPUTED_L2_BLOCK_NUMBER = 0x04;
    /// @notice The identifier for the chain ID.
    uint256 internal constant CHAIN_ID = 0x05;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title ISemver
/// @notice ISemver is a simple contract for ensuring that contracts are
///         versioned using semantic versioning.
interface ISemver {
    /// @notice Getter for the semantic version of the contract. This is not
    ///         meant to be used onchain but instead meant to be used by offchain
    ///         tooling.
    /// @return Semver contract version as a string.
    function version() external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IResourceMetering } from "interfaces/L1/IResourceMetering.sol";
interface ISystemConfig {
    enum UpdateType {
        BATCHER,
        FEE_SCALARS,
        GAS_LIMIT,
        UNSAFE_BLOCK_SIGNER,
        EIP_1559_PARAMS,
        OPERATOR_FEE_PARAMS
    }
    struct Addresses {
        address l1CrossDomainMessenger;
        address l1ERC721Bridge;
        address l1StandardBridge;
        address disputeGameFactory;
        address optimismPortal;
        address optimismMintableERC20Factory;
    }
    event ConfigUpdate(uint256 indexed version, UpdateType indexed updateType, bytes data);
    event Initialized(uint8 version);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    function BATCH_INBOX_SLOT() external view returns (bytes32);
    function DISPUTE_GAME_FACTORY_SLOT() external view returns (bytes32);
    function L1_CROSS_DOMAIN_MESSENGER_SLOT() external view returns (bytes32);
    function L1_ERC_721_BRIDGE_SLOT() external view returns (bytes32);
    function L1_STANDARD_BRIDGE_SLOT() external view returns (bytes32);
    function OPTIMISM_MINTABLE_ERC20_FACTORY_SLOT() external view returns (bytes32);
    function OPTIMISM_PORTAL_SLOT() external view returns (bytes32);
    function START_BLOCK_SLOT() external view returns (bytes32);
    function UNSAFE_BLOCK_SIGNER_SLOT() external view returns (bytes32);
    function VERSION() external view returns (uint256);
    function basefeeScalar() external view returns (uint32);
    function batchInbox() external view returns (address addr_);
    function batcherHash() external view returns (bytes32);
    function blobbasefeeScalar() external view returns (uint32);
    function disputeGameFactory() external view returns (address addr_);
    function gasLimit() external view returns (uint64);
    function eip1559Denominator() external view returns (uint32);
    function eip1559Elasticity() external view returns (uint32);
    function getAddresses() external view returns (Addresses memory);
    function initialize(
        address _owner,
        uint32 _basefeeScalar,
        uint32 _blobbasefeeScalar,
        bytes32 _batcherHash,
        uint64 _gasLimit,
        address _unsafeBlockSigner,
        IResourceMetering.ResourceConfig memory _config,
        address _batchInbox,
        Addresses memory _addresses
    )
        external;
    function l1CrossDomainMessenger() external view returns (address addr_);
    function l1ERC721Bridge() external view returns (address addr_);
    function l1StandardBridge() external view returns (address addr_);
    function maximumGasLimit() external pure returns (uint64);
    function minimumGasLimit() external view returns (uint64);
    function operatorFeeConstant() external view returns (uint64);
    function operatorFeeScalar() external view returns (uint32);
    function optimismMintableERC20Factory() external view returns (address addr_);
    function optimismPortal() external view returns (address addr_);
    function overhead() external view returns (uint256);
    function owner() external view returns (address);
    function renounceOwnership() external;
    function resourceConfig() external view returns (IResourceMetering.ResourceConfig memory);
    function scalar() external view returns (uint256);
    function setBatcherHash(bytes32 _batcherHash) external;
    function setGasConfig(uint256 _overhead, uint256 _scalar) external;
    function setGasConfigEcotone(uint32 _basefeeScalar, uint32 _blobbasefeeScalar) external;
    function setGasLimit(uint64 _gasLimit) external;
    function setOperatorFeeScalars(uint32 _operatorFeeScalar, uint64 _operatorFeeConstant) external;
    function setUnsafeBlockSigner(address _unsafeBlockSigner) external;
    function setEIP1559Params(uint32 _denominator, uint32 _elasticity) external;
    function startBlock() external view returns (uint256 startBlock_);
    function transferOwnership(address newOwner) external; // nosemgrep
    function unsafeBlockSigner() external view returns (address addr_);
    function version() external pure returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IResourceMetering {
    struct ResourceParams {
        uint128 prevBaseFee;
        uint64 prevBoughtGas;
        uint64 prevBlockNum;
    }
    struct ResourceConfig {
        uint32 maxResourceLimit;
        uint8 elasticityMultiplier;
        uint8 baseFeeMaxChangeDenominator;
        uint32 minimumBaseFee;
        uint32 systemTxMaxGas;
        uint128 maximumBaseFee;
    }
    error OutOfGas();
    event Initialized(uint8 version);
    function params() external view returns (uint128 prevBaseFee, uint64 prevBoughtGas, uint64 prevBlockNum); // nosemgrep
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface ISuperchainConfig {
    enum UpdateType {
        GUARDIAN
    }
    event ConfigUpdate(UpdateType indexed updateType, bytes data);
    event Initialized(uint8 version);
    event Paused(string identifier);
    event Unpaused();
    function GUARDIAN_SLOT() external view returns (bytes32);
    function PAUSED_SLOT() external view returns (bytes32);
    function guardian() external view returns (address guardian_);
    function initialize(address _guardian, bool _paused) external;
    function pause(string memory _identifier) external;
    function paused() external view returns (bool paused_);
    function unpause() external;
    function version() external view returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IDisputeGame } from "interfaces/dispute/IDisputeGame.sol";
import { GameId, Timestamp, Claim, Hash, GameType } from "src/dispute/lib/Types.sol";
interface IDisputeGameFactory {
    struct GameSearchResult {
        uint256 index;
        GameId metadata;
        Timestamp timestamp;
        Claim rootClaim;
        bytes extraData;
    }
    error GameAlreadyExists(Hash uuid);
    error IncorrectBondAmount();
    error NoImplementation(GameType gameType);
    event DisputeGameCreated(address indexed disputeProxy, GameType indexed gameType, Claim indexed rootClaim);
    event ImplementationSet(address indexed impl, GameType indexed gameType);
    event InitBondUpdated(GameType indexed gameType, uint256 indexed newBond);
    event Initialized(uint8 version);
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    function create(
        GameType _gameType,
        Claim _rootClaim,
        bytes memory _extraData
    )
        external
        payable
        returns (IDisputeGame proxy_);
    function findLatestGames(
        GameType _gameType,
        uint256 _start,
        uint256 _n
    )
        external
        view
        returns (GameSearchResult[] memory games_);
    function gameAtIndex(uint256 _index)
        external
        view
        returns (GameType gameType_, Timestamp timestamp_, IDisputeGame proxy_);
    function gameCount() external view returns (uint256 gameCount_);
    function gameImpls(GameType) external view returns (IDisputeGame);
    function games(
        GameType _gameType,
        Claim _rootClaim,
        bytes memory _extraData
    )
        external
        view
        returns (IDisputeGame proxy_, Timestamp timestamp_);
    function getGameUUID(
        GameType _gameType,
        Claim _rootClaim,
        bytes memory _extraData
    )
        external
        pure
        returns (Hash uuid_);
    function initBonds(GameType) external view returns (uint256);
    function initialize(address _owner) external;
    function owner() external view returns (address);
    function renounceOwnership() external;
    function setImplementation(GameType _gameType, IDisputeGame _impl) external;
    function setInitBond(GameType _gameType, uint256 _initBond) external;
    function transferOwnership(address newOwner) external; // nosemgrep
    function version() external view returns (string memory);
    function __constructor__() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import { IInitializable } from "interfaces/dispute/IInitializable.sol";
import { Timestamp, GameStatus, GameType, Claim, Hash } from "src/dispute/lib/Types.sol";
interface IDisputeGame is IInitializable {
    event Resolved(GameStatus indexed status);
    function createdAt() external view returns (Timestamp);
    function resolvedAt() external view returns (Timestamp);
    function status() external view returns (GameStatus);
    function gameType() external view returns (GameType gameType_);
    function gameCreator() external pure returns (address creator_);
    function rootClaim() external pure returns (Claim rootClaim_);
    function l1Head() external pure returns (Hash l1Head_);
    function l2BlockNumber() external pure returns (uint256 l2BlockNumber_);
    function extraData() external pure returns (bytes memory extraData_);
    function resolve() external returns (GameStatus status_);
    function gameData() external view returns (GameType gameType_, Claim rootClaim_, bytes memory extraData_);
    function wasRespectedGameTypeWhenCreated() external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }
    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }
    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }
            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                return prod0 / denominator;
            }
            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1);
            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////
            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)
                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }
            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.
            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)
                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)
                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }
            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;
            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;
            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256
            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }
    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(
        uint256 x,
        uint256 y,
        uint256 denominator,
        Rounding rounding
    ) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }
    /**
     * @dev Returns the square root of a number. It the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }
        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`.
        // We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
        // This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
        // Using an algorithm similar to the msb conmputation, we are able to compute `result = 2**(k/2)` which is a
        // good first aproximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1;
        uint256 x = a;
        if (x >> 128 > 0) {
            x >>= 128;
            result <<= 64;
        }
        if (x >> 64 > 0) {
            x >>= 64;
            result <<= 32;
        }
        if (x >> 32 > 0) {
            x >>= 32;
            result <<= 16;
        }
        if (x >> 16 > 0) {
            x >>= 16;
            result <<= 8;
        }
        if (x >> 8 > 0) {
            x >>= 8;
            result <<= 4;
        }
        if (x >> 4 > 0) {
            x >>= 4;
            result <<= 2;
        }
        if (x >> 2 > 0) {
            result <<= 1;
        }
        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }
    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        uint256 result = sqrt(a);
        if (rounding == Rounding.Up && result * result < a) {
            result += 1;
        }
        return result;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/// @title Burn
/// @notice Utilities for burning stuff.
library Burn {
    /// @notice Burns a given amount of ETH.
    /// @param _amount Amount of ETH to burn.
    function eth(uint256 _amount) internal {
        new Burner{ value: _amount }();
    }
    /// @notice Burns a given amount of gas.
    /// @param _amount Amount of gas to burn.
    function gas(uint256 _amount) internal view {
        uint256 i = 0;
        uint256 initialGas = gasleft();
        while (initialGas - gasleft() < _amount) {
            ++i;
        }
    }
}
/// @title Burner
/// @notice Burner self-destructs on creation and sends all ETH to itself, removing all ETH given to
///         the contract from the circulating supply. Self-destructing is the only way to remove ETH
///         from the circulating supply.
contract Burner {
    constructor() payable {
        selfdestruct(payable(address(this)));
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { SignedMath } from "@openzeppelin/contracts/utils/math/SignedMath.sol";
import { FixedPointMathLib } from "@rari-capital/solmate/src/utils/FixedPointMathLib.sol";
/// @title Arithmetic
/// @notice Even more math than before.
library Arithmetic {
    /// @notice Clamps a value between a minimum and maximum.
    /// @param _value The value to clamp.
    /// @param _min   The minimum value.
    /// @param _max   The maximum value.
    /// @return The clamped value.
    function clamp(int256 _value, int256 _min, int256 _max) internal pure returns (int256) {
        return SignedMath.min(SignedMath.max(_value, _min), _max);
    }
    /// @notice (c)oefficient (d)enominator (exp)onentiation function.
    ///         Returns the result of: c * (1 - 1/d)^exp.
    /// @param _coefficient Coefficient of the function.
    /// @param _denominator Fractional denominator.
    /// @param _exponent    Power function exponent.
    /// @return Result of c * (1 - 1/d)^exp.
    function cdexp(int256 _coefficient, int256 _denominator, int256 _exponent) internal pure returns (int256) {
        return (_coefficient * (FixedPointMathLib.powWad(1e18 - (1e18 / _denominator), _exponent * 1e18))) / 1e18;
    }
    /// @notice Saturating addition.
    /// @param _x The first value.
    /// @param _y The second value.
    /// @return z_ The sum of the two values, or the maximum value if the sum overflows.
    /// @dev Returns `min(2 ** 256 - 1, x + y)`.
    /// @dev Taken from Solady
    /// https://github.com/Vectorized/solady/blob/63416d60c78aba70a12ca1b3c11125d1061caa12/src/utils/FixedPointMathLib.sol#L673
    function saturatingAdd(uint256 _x, uint256 _y) internal pure returns (uint256 z_) {
        assembly ("memory-safe") {
            z_ := or(sub(0, lt(add(_x, _y), _x)), add(_x, _y))
        }
    }
    /// @notice Saturating multiplication.
    /// @param _x The first value.
    /// @param _y The second value.
    /// @return z_ The product of the two values, or the maximum value if the product overflows.
    /// @dev Returns `min(2 ** 256 - 1, x * y).
    /// @dev Taken from Solady
    /// https://github.com/Vectorized/solady/blob/63416d60c78aba70a12ca1b3c11125d1061caa12/src/utils/FixedPointMathLib.sol#L681
    function saturatingMul(uint256 _x, uint256 _y) internal pure returns (uint256 z_) {
        assembly ("memory-safe") {
            z_ := or(sub(or(iszero(_x), eq(div(mul(_x, _y), _x), _y)), 1), mul(_x, _y))
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { Types } from "src/libraries/Types.sol";
import { Hashing } from "src/libraries/Hashing.sol";
import { RLPWriter } from "src/libraries/rlp/RLPWriter.sol";
/// @title Encoding
/// @notice Encoding handles Optimism's various different encoding schemes.
library Encoding {
    /// @notice RLP encodes the L2 transaction that would be generated when a given deposit is sent
    ///         to the L2 system. Useful for searching for a deposit in the L2 system. The
    ///         transaction is prefixed with 0x7e to identify its EIP-2718 type.
    /// @param _tx User deposit transaction to encode.
    /// @return RLP encoded L2 deposit transaction.
    function encodeDepositTransaction(Types.UserDepositTransaction memory _tx) internal pure returns (bytes memory) {
        bytes32 source = Hashing.hashDepositSource(_tx.l1BlockHash, _tx.logIndex);
        bytes[] memory raw = new bytes[](8);
        raw[0] = RLPWriter.writeBytes(abi.encodePacked(source));
        raw[1] = RLPWriter.writeAddress(_tx.from);
        raw[2] = _tx.isCreation ? RLPWriter.writeBytes("") : RLPWriter.writeAddress(_tx.to);
        raw[3] = RLPWriter.writeUint(_tx.mint);
        raw[4] = RLPWriter.writeUint(_tx.value);
        raw[5] = RLPWriter.writeUint(uint256(_tx.gasLimit));
        raw[6] = RLPWriter.writeBool(false);
        raw[7] = RLPWriter.writeBytes(_tx.data);
        return abi.encodePacked(uint8(0x7e), RLPWriter.writeList(raw));
    }
    /// @notice Encodes the cross domain message based on the version that is encoded into the
    ///         message nonce.
    /// @param _nonce    Message nonce with version encoded into the first two bytes.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessage(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes memory)
    {
        (, uint16 version) = decodeVersionedNonce(_nonce);
        if (version == 0) {
            return encodeCrossDomainMessageV0(_target, _sender, _data, _nonce);
        } else if (version == 1) {
            return encodeCrossDomainMessageV1(_nonce, _sender, _target, _value, _gasLimit, _data);
        } else {
            revert("Encoding: unknown cross domain message version");
        }
    }
    /// @notice Encodes a cross domain message based on the V0 (legacy) encoding.
    /// @param _target Address of the target of the message.
    /// @param _sender Address of the sender of the message.
    /// @param _data   Data to send with the message.
    /// @param _nonce  Message nonce.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessageV0(
        address _target,
        address _sender,
        bytes memory _data,
        uint256 _nonce
    )
        internal
        pure
        returns (bytes memory)
    {
        // nosemgrep: sol-style-use-abi-encodecall
        return abi.encodeWithSignature("relayMessage(address,address,bytes,uint256)", _target, _sender, _data, _nonce);
    }
    /// @notice Encodes a cross domain message based on the V1 (current) encoding.
    /// @param _nonce    Message nonce.
    /// @param _sender   Address of the sender of the message.
    /// @param _target   Address of the target of the message.
    /// @param _value    ETH value to send to the target.
    /// @param _gasLimit Gas limit to use for the message.
    /// @param _data     Data to send with the message.
    /// @return Encoded cross domain message.
    function encodeCrossDomainMessageV1(
        uint256 _nonce,
        address _sender,
        address _target,
        uint256 _value,
        uint256 _gasLimit,
        bytes memory _data
    )
        internal
        pure
        returns (bytes memory)
    {
        // nosemgrep: sol-style-use-abi-encodecall
        return abi.encodeWithSignature(
            "relayMessage(uint256,address,address,uint256,uint256,bytes)",
            _nonce,
            _sender,
            _target,
            _value,
            _gasLimit,
            _data
        );
    }
    /// @notice Adds a version number into the first two bytes of a message nonce.
    /// @param _nonce   Message nonce to encode into.
    /// @param _version Version number to encode into the message nonce.
    /// @return Message nonce with version encoded into the first two bytes.
    function encodeVersionedNonce(uint240 _nonce, uint16 _version) internal pure returns (uint256) {
        uint256 nonce;
        assembly {
            nonce := or(shl(240, _version), _nonce)
        }
        return nonce;
    }
    /// @notice Pulls the version out of a version-encoded nonce.
    /// @param _nonce Message nonce with version encoded into the first two bytes.
    /// @return Nonce without encoded version.
    /// @return Version of the message.
    function decodeVersionedNonce(uint256 _nonce) internal pure returns (uint240, uint16) {
        uint240 nonce;
        uint16 version;
        assembly {
            nonce := and(_nonce, 0x0000ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
            version := shr(240, _nonce)
        }
        return (nonce, version);
    }
    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesEcotone
    /// @param _baseFeeScalar       L1 base fee Scalar
    /// @param _blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param _sequenceNumber      Number of L2 blocks since epoch start.
    /// @param _timestamp           L1 timestamp.
    /// @param _number              L1 blocknumber.
    /// @param _baseFee             L1 base fee.
    /// @param _blobBaseFee         L1 blob base fee.
    /// @param _hash                L1 blockhash.
    /// @param _batcherHash         Versioned hash to authenticate batcher by.
    function encodeSetL1BlockValuesEcotone(
        uint32 _baseFeeScalar,
        uint32 _blobBaseFeeScalar,
        uint64 _sequenceNumber,
        uint64 _timestamp,
        uint64 _number,
        uint256 _baseFee,
        uint256 _blobBaseFee,
        bytes32 _hash,
        bytes32 _batcherHash
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesEcotone()"));
        return abi.encodePacked(
            functionSignature,
            _baseFeeScalar,
            _blobBaseFeeScalar,
            _sequenceNumber,
            _timestamp,
            _number,
            _baseFee,
            _blobBaseFee,
            _hash,
            _batcherHash
        );
    }
    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesIsthmus
    /// @param _baseFeeScalar       L1 base fee Scalar
    /// @param _blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param _sequenceNumber      Number of L2 blocks since epoch start.
    /// @param _timestamp           L1 timestamp.
    /// @param _number              L1 blocknumber.
    /// @param _baseFee             L1 base fee.
    /// @param _blobBaseFee         L1 blob base fee.
    /// @param _hash                L1 blockhash.
    /// @param _batcherHash         Versioned hash to authenticate batcher by.
    /// @param _operatorFeeScalar   Operator fee scalar.
    /// @param _operatorFeeConstant Operator fee constant.
    function encodeSetL1BlockValuesIsthmus(
        uint32 _baseFeeScalar,
        uint32 _blobBaseFeeScalar,
        uint64 _sequenceNumber,
        uint64 _timestamp,
        uint64 _number,
        uint256 _baseFee,
        uint256 _blobBaseFee,
        bytes32 _hash,
        bytes32 _batcherHash,
        uint32 _operatorFeeScalar,
        uint64 _operatorFeeConstant
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesIsthmus()"));
        return abi.encodePacked(
            functionSignature,
            _baseFeeScalar,
            _blobBaseFeeScalar,
            _sequenceNumber,
            _timestamp,
            _number,
            _baseFee,
            _blobBaseFee,
            _hash,
            _batcherHash,
            _operatorFeeScalar,
            _operatorFeeConstant
        );
    }
    /// @notice Returns an appropriately encoded call to L1Block.setL1BlockValuesInterop
    /// @param _baseFeeScalar       L1 base fee Scalar
    /// @param _blobBaseFeeScalar   L1 blob base fee Scalar
    /// @param _sequenceNumber      Number of L2 blocks since epoch start.
    /// @param _timestamp           L1 timestamp.
    /// @param _number              L1 blocknumber.
    /// @param _baseFee             L1 base fee.
    /// @param _blobBaseFee         L1 blob base fee.
    /// @param _hash                L1 blockhash.
    /// @param _batcherHash         Versioned hash to authenticate batcher by.
    function encodeSetL1BlockValuesInterop(
        uint32 _baseFeeScalar,
        uint32 _blobBaseFeeScalar,
        uint64 _sequenceNumber,
        uint64 _timestamp,
        uint64 _number,
        uint256 _baseFee,
        uint256 _blobBaseFee,
        bytes32 _hash,
        bytes32 _batcherHash
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes4 functionSignature = bytes4(keccak256("setL1BlockValuesInterop()"));
        return abi.encodePacked(
            functionSignature,
            _baseFeeScalar,
            _blobBaseFeeScalar,
            _sequenceNumber,
            _timestamp,
            _number,
            _baseFee,
            _blobBaseFee,
            _hash,
            _batcherHash
        );
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// Libraries
import { Bytes } from "src/libraries/Bytes.sol";
import { RLPReader } from "src/libraries/rlp/RLPReader.sol";
/// @title MerkleTrie
/// @notice MerkleTrie is a small library for verifying standard Ethereum Merkle-Patricia trie
///         inclusion proofs. By default, this library assumes a hexary trie. One can change the
///         trie radix constant to support other trie radixes.
library MerkleTrie {
    /// @notice Struct representing a node in the trie.
    /// @custom:field encoded The RLP-encoded node.
    /// @custom:field decoded The RLP-decoded node.
    struct TrieNode {
        bytes encoded;
        RLPReader.RLPItem[] decoded;
    }
    /// @notice Determines the number of elements per branch node.
    uint256 internal constant TREE_RADIX = 16;
    /// @notice Branch nodes have TREE_RADIX elements and one value element.
    uint256 internal constant BRANCH_NODE_LENGTH = TREE_RADIX + 1;
    /// @notice Leaf nodes and extension nodes have two elements, a `path` and a `value`.
    uint256 internal constant LEAF_OR_EXTENSION_NODE_LENGTH = 2;
    /// @notice Prefix for even-nibbled extension node paths.
    uint8 internal constant PREFIX_EXTENSION_EVEN = 0;
    /// @notice Prefix for odd-nibbled extension node paths.
    uint8 internal constant PREFIX_EXTENSION_ODD = 1;
    /// @notice Prefix for even-nibbled leaf node paths.
    uint8 internal constant PREFIX_LEAF_EVEN = 2;
    /// @notice Prefix for odd-nibbled leaf node paths.
    uint8 internal constant PREFIX_LEAF_ODD = 3;
    /// @notice Verifies a proof that a given key/value pair is present in the trie.
    /// @param _key   Key of the node to search for, as a hex string.
    /// @param _value Value of the node to search for, as a hex string.
    /// @param _proof Merkle trie inclusion proof for the desired node. Unlike traditional Merkle
    ///               trees, this proof is executed top-down and consists of a list of RLP-encoded
    ///               nodes that make a path down to the target node.
    /// @param _root  Known root of the Merkle trie. Used to verify that the included proof is
    ///               correctly constructed.
    /// @return valid_ Whether or not the proof is valid.
    function verifyInclusionProof(
        bytes memory _key,
        bytes memory _value,
        bytes[] memory _proof,
        bytes32 _root
    )
        internal
        pure
        returns (bool valid_)
    {
        valid_ = Bytes.equal(_value, get(_key, _proof, _root));
    }
    /// @notice Retrieves the value associated with a given key.
    /// @param _key   Key to search for, as hex bytes.
    /// @param _proof Merkle trie inclusion proof for the key.
    /// @param _root  Known root of the Merkle trie.
    /// @return value_ Value of the key if it exists.
    function get(bytes memory _key, bytes[] memory _proof, bytes32 _root) internal pure returns (bytes memory value_) {
        require(_key.length > 0, "MerkleTrie: empty key");
        TrieNode[] memory proof = _parseProof(_proof);
        bytes memory key = Bytes.toNibbles(_key);
        bytes memory currentNodeID = abi.encodePacked(_root);
        uint256 currentKeyIndex = 0;
        // Proof is top-down, so we start at the first element (root).
        for (uint256 i = 0; i < proof.length; i++) {
            TrieNode memory currentNode = proof[i];
            // Key index should never exceed total key length or we'll be out of bounds.
            require(currentKeyIndex <= key.length, "MerkleTrie: key index exceeds total key length");
            if (currentKeyIndex == 0) {
                // First proof element is always the root node.
                require(
                    Bytes.equal(abi.encodePacked(keccak256(currentNode.encoded)), currentNodeID),
                    "MerkleTrie: invalid root hash"
                );
            } else if (currentNode.encoded.length >= 32) {
                // Nodes 32 bytes or larger are hashed inside branch nodes.
                require(
                    Bytes.equal(abi.encodePacked(keccak256(currentNode.encoded)), currentNodeID),
                    "MerkleTrie: invalid large internal hash"
                );
            } else {
                // Nodes smaller than 32 bytes aren't hashed.
                require(Bytes.equal(currentNode.encoded, currentNodeID), "MerkleTrie: invalid internal node hash");
            }
            if (currentNode.decoded.length == BRANCH_NODE_LENGTH) {
                if (currentKeyIndex == key.length) {
                    // Value is the last element of the decoded list (for branch nodes). There's
                    // some ambiguity in the Merkle trie specification because bytes(0) is a
                    // valid value to place into the trie, but for branch nodes bytes(0) can exist
                    // even when the value wasn't explicitly placed there. Geth treats a value of
                    // bytes(0) as "key does not exist" and so we do the same.
                    value_ = RLPReader.readBytes(currentNode.decoded[TREE_RADIX]);
                    require(value_.length > 0, "MerkleTrie: value length must be greater than zero (branch)");
                    // Extra proof elements are not allowed.
                    require(i == proof.length - 1, "MerkleTrie: value node must be last node in proof (branch)");
                    return value_;
                } else {
                    // We're not at the end of the key yet.
                    // Figure out what the next node ID should be and continue.
                    uint8 branchKey = uint8(key[currentKeyIndex]);
                    RLPReader.RLPItem memory nextNode = currentNode.decoded[branchKey];
                    currentNodeID = _getNodeID(nextNode);
                    currentKeyIndex += 1;
                }
            } else if (currentNode.decoded.length == LEAF_OR_EXTENSION_NODE_LENGTH) {
                bytes memory path = _getNodePath(currentNode);
                uint8 prefix = uint8(path[0]);
                uint8 offset = 2 - (prefix % 2);
                bytes memory pathRemainder = Bytes.slice(path, offset);
                bytes memory keyRemainder = Bytes.slice(key, currentKeyIndex);
                uint256 sharedNibbleLength = _getSharedNibbleLength(pathRemainder, keyRemainder);
                // Whether this is a leaf node or an extension node, the path remainder MUST be a
                // prefix of the key remainder (or be equal to the key remainder) or the proof is
                // considered invalid.
                require(
                    pathRemainder.length == sharedNibbleLength,
                    "MerkleTrie: path remainder must share all nibbles with key"
                );
                if (prefix == PREFIX_LEAF_EVEN || prefix == PREFIX_LEAF_ODD) {
                    // Prefix of 2 or 3 means this is a leaf node. For the leaf node to be valid,
                    // the key remainder must be exactly equal to the path remainder. We already
                    // did the necessary byte comparison, so it's more efficient here to check that
                    // the key remainder length equals the shared nibble length, which implies
                    // equality with the path remainder (since we already did the same check with
                    // the path remainder and the shared nibble length).
                    require(
                        keyRemainder.length == sharedNibbleLength,
                        "MerkleTrie: key remainder must be identical to path remainder"
                    );
                    // Our Merkle Trie is designed specifically for the purposes of the Ethereum
                    // state trie. Empty values are not allowed in the state trie, so we can safely
                    // say that if the value is empty, the key should not exist and the proof is
                    // invalid.
                    value_ = RLPReader.readBytes(currentNode.decoded[1]);
                    require(value_.length > 0, "MerkleTrie: value length must be greater than zero (leaf)");
                    // Extra proof elements are not allowed.
                    require(i == proof.length - 1, "MerkleTrie: value node must be last node in proof (leaf)");
                    return value_;
                } else if (prefix == PREFIX_EXTENSION_EVEN || prefix == PREFIX_EXTENSION_ODD) {
                    // Prefix of 0 or 1 means this is an extension node. We move onto the next node
                    // in the proof and increment the key index by the length of the path remainder
                    // which is equal to the shared nibble length.
                    currentNodeID = _getNodeID(currentNode.decoded[1]);
                    currentKeyIndex += sharedNibbleLength;
                } else {
                    revert("MerkleTrie: received a node with an unknown prefix");
                }
            } else {
                revert("MerkleTrie: received an unparseable node");
            }
        }
        revert("MerkleTrie: ran out of proof elements");
    }
    /// @notice Parses an array of proof elements into a new array that contains both the original
    ///         encoded element and the RLP-decoded element.
    /// @param _proof Array of proof elements to parse.
    /// @return proof_ Proof parsed into easily accessible structs.
    function _parseProof(bytes[] memory _proof) private pure returns (TrieNode[] memory proof_) {
        uint256 length = _proof.length;
        proof_ = new TrieNode[](length);
        for (uint256 i = 0; i < length;) {
            proof_[i] = TrieNode({ encoded: _proof[i], decoded: RLPReader.readList(_proof[i]) });
            unchecked {
                ++i;
            }
        }
    }
    /// @notice Picks out the ID for a node. Node ID is referred to as the "hash" within the
    ///         specification, but nodes < 32 bytes are not actually hashed.
    /// @param _node Node to pull an ID for.
    /// @return id_ ID for the node, depending on the size of its contents.
    function _getNodeID(RLPReader.RLPItem memory _node) private pure returns (bytes memory id_) {
        id_ = _node.length < 32 ? RLPReader.readRawBytes(_node) : RLPReader.readBytes(_node);
    }
    /// @notice Gets the path for a leaf or extension node.
    /// @param _node Node to get a path for.
    /// @return nibbles_ Node path, converted to an array of nibbles.
    function _getNodePath(TrieNode memory _node) private pure returns (bytes memory nibbles_) {
        nibbles_ = Bytes.toNibbles(RLPReader.readBytes(_node.decoded[0]));
    }
    /// @notice Utility; determines the number of nibbles shared between two nibble arrays.
    /// @param _a First nibble array.
    /// @param _b Second nibble array.
    /// @return shared_ Number of shared nibbles.
    function _getSharedNibbleLength(bytes memory _a, bytes memory _b) private pure returns (uint256 shared_) {
        uint256 max = (_a.length < _b.length) ? _a.length : _b.length;
        for (; shared_ < max && _a[shared_] == _b[shared_];) {
            unchecked {
                ++shared_;
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;
// Libraries
import { Position } from "src/dispute/lib/LibPosition.sol";
using LibClaim for Claim global;
using LibHash for Hash global;
using LibDuration for Duration global;
using LibClock for Clock global;
using LibGameId for GameId global;
using LibTimestamp for Timestamp global;
using LibVMStatus for VMStatus global;
using LibGameType for GameType global;
/// @notice A `Clock` represents a packed `Duration` and `Timestamp`
/// @dev The packed layout of this type is as follows:
/// ┌────────────┬────────────────┐
/// │    Bits    │     Value      │
/// ├────────────┼────────────────┤
/// │ [0, 64)    │ Duration       │
/// │ [64, 128)  │ Timestamp      │
/// └────────────┴────────────────┘
type Clock is uint128;
/// @title LibClock
/// @notice This library contains helper functions for working with the `Clock` type.
library LibClock {
    /// @notice Packs a `Duration` and `Timestamp` into a `Clock` type.
    /// @param _duration The `Duration` to pack into the `Clock` type.
    /// @param _timestamp The `Timestamp` to pack into the `Clock` type.
    /// @return clock_ The `Clock` containing the `_duration` and `_timestamp`.
    function wrap(Duration _duration, Timestamp _timestamp) internal pure returns (Clock clock_) {
        assembly {
            clock_ := or(shl(0x40, _duration), _timestamp)
        }
    }
    /// @notice Pull the `Duration` out of a `Clock` type.
    /// @param _clock The `Clock` type to pull the `Duration` out of.
    /// @return duration_ The `Duration` pulled out of `_clock`.
    function duration(Clock _clock) internal pure returns (Duration duration_) {
        // Shift the high-order 64 bits into the low-order 64 bits, leaving only the `duration`.
        assembly {
            duration_ := shr(0x40, _clock)
        }
    }
    /// @notice Pull the `Timestamp` out of a `Clock` type.
    /// @param _clock The `Clock` type to pull the `Timestamp` out of.
    /// @return timestamp_ The `Timestamp` pulled out of `_clock`.
    function timestamp(Clock _clock) internal pure returns (Timestamp timestamp_) {
        // Clean the high-order 192 bits by shifting the clock left and then right again, leaving
        // only the `timestamp`.
        assembly {
            timestamp_ := shr(0xC0, shl(0xC0, _clock))
        }
    }
    /// @notice Get the value of a `Clock` type in the form of the underlying uint128.
    /// @param _clock The `Clock` type to get the value of.
    /// @return clock_ The value of the `Clock` type as a uint128 type.
    function raw(Clock _clock) internal pure returns (uint128 clock_) {
        assembly {
            clock_ := _clock
        }
    }
}
/// @notice A `GameId` represents a packed 4 byte game ID, a 8 byte timestamp, and a 20 byte address.
/// @dev The packed layout of this type is as follows:
/// ┌───────────┬───────────┐
/// │   Bits    │   Value   │
/// ├───────────┼───────────┤
/// │ [0, 32)   │ Game Type │
/// │ [32, 96)  │ Timestamp │
/// │ [96, 256) │ Address   │
/// └───────────┴───────────┘
type GameId is bytes32;
/// @title LibGameId
/// @notice Utility functions for packing and unpacking GameIds.
library LibGameId {
    /// @notice Packs values into a 32 byte GameId type.
    /// @param _gameType The game type.
    /// @param _timestamp The timestamp of the game's creation.
    /// @param _gameProxy The game proxy address.
    /// @return gameId_ The packed GameId.
    function pack(
        GameType _gameType,
        Timestamp _timestamp,
        address _gameProxy
    )
        internal
        pure
        returns (GameId gameId_)
    {
        assembly {
            gameId_ := or(or(shl(224, _gameType), shl(160, _timestamp)), _gameProxy)
        }
    }
    /// @notice Unpacks values from a 32 byte GameId type.
    /// @param _gameId The packed GameId.
    /// @return gameType_ The game type.
    /// @return timestamp_ The timestamp of the game's creation.
    /// @return gameProxy_ The game proxy address.
    function unpack(GameId _gameId)
        internal
        pure
        returns (GameType gameType_, Timestamp timestamp_, address gameProxy_)
    {
        assembly {
            gameType_ := shr(224, _gameId)
            timestamp_ := and(shr(160, _gameId), 0xFFFFFFFFFFFFFFFF)
            gameProxy_ := and(_gameId, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
        }
    }
}
/// @notice A claim represents an MPT root representing the state of the fault proof program.
type Claim is bytes32;
/// @title LibClaim
/// @notice This library contains helper functions for working with the `Claim` type.
library LibClaim {
    /// @notice Get the value of a `Claim` type in the form of the underlying bytes32.
    /// @param _claim The `Claim` type to get the value of.
    /// @return claim_ The value of the `Claim` type as a bytes32 type.
    function raw(Claim _claim) internal pure returns (bytes32 claim_) {
        assembly {
            claim_ := _claim
        }
    }
    /// @notice Hashes a claim and a position together.
    /// @param _claim A Claim type.
    /// @param _position The position of `claim`.
    /// @param _challengeIndex The index of the claim being moved against.
    /// @return claimHash_ A hash of abi.encodePacked(claim, position|challengeIndex);
    function hashClaimPos(
        Claim _claim,
        Position _position,
        uint256 _challengeIndex
    )
        internal
        pure
        returns (Hash claimHash_)
    {
        assembly {
            mstore(0x00, _claim)
            mstore(0x20, or(shl(128, _position), and(0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, _challengeIndex)))
            claimHash_ := keccak256(0x00, 0x40)
        }
    }
}
/// @notice A dedicated duration type.
/// @dev Unit: seconds
type Duration is uint64;
/// @title LibDuration
/// @notice This library contains helper functions for working with the `Duration` type.
library LibDuration {
    /// @notice Get the value of a `Duration` type in the form of the underlying uint64.
    /// @param _duration The `Duration` type to get the value of.
    /// @return duration_ The value of the `Duration` type as a uint64 type.
    function raw(Duration _duration) internal pure returns (uint64 duration_) {
        assembly {
            duration_ := _duration
        }
    }
}
/// @notice A custom type for a generic hash.
type Hash is bytes32;
/// @title LibHash
/// @notice This library contains helper functions for working with the `Hash` type.
library LibHash {
    /// @notice Get the value of a `Hash` type in the form of the underlying bytes32.
    /// @param _hash The `Hash` type to get the value of.
    /// @return hash_ The value of the `Hash` type as a bytes32 type.
    function raw(Hash _hash) internal pure returns (bytes32 hash_) {
        assembly {
            hash_ := _hash
        }
    }
}
/// @notice A dedicated timestamp type.
type Timestamp is uint64;
/// @title LibTimestamp
/// @notice This library contains helper functions for working with the `Timestamp` type.
library LibTimestamp {
    /// @notice Get the value of a `Timestamp` type in the form of the underlying uint64.
    /// @param _timestamp The `Timestamp` type to get the value of.
    /// @return timestamp_ The value of the `Timestamp` type as a uint64 type.
    function raw(Timestamp _timestamp) internal pure returns (uint64 timestamp_) {
        assembly {
            timestamp_ := _timestamp
        }
    }
}
/// @notice A `VMStatus` represents the status of a VM execution.
type VMStatus is uint8;
/// @title LibVMStatus
/// @notice This library contains helper functions for working with the `VMStatus` type.
library LibVMStatus {
    /// @notice Get the value of a `VMStatus` type in the form of the underlying uint8.
    /// @param _vmstatus The `VMStatus` type to get the value of.
    /// @return vmstatus_ The value of the `VMStatus` type as a uint8 type.
    function raw(VMStatus _vmstatus) internal pure returns (uint8 vmstatus_) {
        assembly {
            vmstatus_ := _vmstatus
        }
    }
}
/// @notice A `GameType` represents the type of game being played.
type GameType is uint32;
/// @title LibGameType
/// @notice This library contains helper functions for working with the `GameType` type.
library LibGameType {
    /// @notice Get the value of a `GameType` type in the form of the underlying uint32.
    /// @param _gametype The `GameType` type to get the value of.
    /// @return gametype_ The value of the `GameType` type as a uint32 type.
    function raw(GameType _gametype) internal pure returns (uint32 gametype_) {
        assembly {
            gametype_ := _gametype
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IInitializable {
    function initialize() external payable;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/SignedMath.sol)
pragma solidity ^0.8.0;
/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a >= b ? a : b;
    }
    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }
    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }
    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/FixedPointMathLib.sol)
library FixedPointMathLib {
    /*//////////////////////////////////////////////////////////////
                    SIMPLIFIED FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/
    uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.
    function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
    }
    function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
    }
    function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
    }
    function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
        return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
    }
    function powWad(int256 x, int256 y) internal pure returns (int256) {
        // Equivalent to x to the power of y because x ** y = (e ** ln(x)) ** y = e ** (ln(x) * y)
        return expWad((lnWad(x) * y) / int256(WAD)); // Using ln(x) means x must be greater than 0.
    }
    function expWad(int256 x) internal pure returns (int256 r) {
        unchecked {
            // When the result is < 0.5 we return zero. This happens when
            // x <= floor(log(0.5e18) * 1e18) ~ -42e18
            if (x <= -42139678854452767551) return 0;
            // When the result is > (2**255 - 1) / 1e18 we can not represent it as an
            // int. This happens when x >= floor(log((2**255 - 1) / 1e18) * 1e18) ~ 135.
            if (x >= 135305999368893231589) revert("EXP_OVERFLOW");
            // x is now in the range (-42, 136) * 1e18. Convert to (-42, 136) * 2**96
            // for more intermediate precision and a binary basis. This base conversion
            // is a multiplication by 1e18 / 2**96 = 5**18 / 2**78.
            x = (x << 78) / 5**18;
            // Reduce range of x to (-½ ln 2, ½ ln 2) * 2**96 by factoring out powers
            // of two such that exp(x) = exp(x') * 2**k, where k is an integer.
            // Solving this gives k = round(x / log(2)) and x' = x - k * log(2).
            int256 k = ((x << 96) / 54916777467707473351141471128 + 2**95) >> 96;
            x = x - k * 54916777467707473351141471128;
            // k is in the range [-61, 195].
            // Evaluate using a (6, 7)-term rational approximation.
            // p is made monic, we'll multiply by a scale factor later.
            int256 y = x + 1346386616545796478920950773328;
            y = ((y * x) >> 96) + 57155421227552351082224309758442;
            int256 p = y + x - 94201549194550492254356042504812;
            p = ((p * y) >> 96) + 28719021644029726153956944680412240;
            p = p * x + (4385272521454847904659076985693276 << 96);
            // We leave p in 2**192 basis so we don't need to scale it back up for the division.
            int256 q = x - 2855989394907223263936484059900;
            q = ((q * x) >> 96) + 50020603652535783019961831881945;
            q = ((q * x) >> 96) - 533845033583426703283633433725380;
            q = ((q * x) >> 96) + 3604857256930695427073651918091429;
            q = ((q * x) >> 96) - 14423608567350463180887372962807573;
            q = ((q * x) >> 96) + 26449188498355588339934803723976023;
            assembly {
                // Div in assembly because solidity adds a zero check despite the unchecked.
                // The q polynomial won't have zeros in the domain as all its roots are complex.
                // No scaling is necessary because p is already 2**96 too large.
                r := sdiv(p, q)
            }
            // r should be in the range (0.09, 0.25) * 2**96.
            // We now need to multiply r by:
            // * the scale factor s = ~6.031367120.
            // * the 2**k factor from the range reduction.
            // * the 1e18 / 2**96 factor for base conversion.
            // We do this all at once, with an intermediate result in 2**213
            // basis, so the final right shift is always by a positive amount.
            r = int256((uint256(r) * 3822833074963236453042738258902158003155416615667) >> uint256(195 - k));
        }
    }
    function lnWad(int256 x) internal pure returns (int256 r) {
        unchecked {
            require(x > 0, "UNDEFINED");
            // We want to convert x from 10**18 fixed point to 2**96 fixed point.
            // We do this by multiplying by 2**96 / 10**18. But since
            // ln(x * C) = ln(x) + ln(C), we can simply do nothing here
            // and add ln(2**96 / 10**18) at the end.
            // Reduce range of x to (1, 2) * 2**96
            // ln(2^k * x) = k * ln(2) + ln(x)
            int256 k = int256(log2(uint256(x))) - 96;
            x <<= uint256(159 - k);
            x = int256(uint256(x) >> 159);
            // Evaluate using a (8, 8)-term rational approximation.
            // p is made monic, we will multiply by a scale factor later.
            int256 p = x + 3273285459638523848632254066296;
            p = ((p * x) >> 96) + 24828157081833163892658089445524;
            p = ((p * x) >> 96) + 43456485725739037958740375743393;
            p = ((p * x) >> 96) - 11111509109440967052023855526967;
            p = ((p * x) >> 96) - 45023709667254063763336534515857;
            p = ((p * x) >> 96) - 14706773417378608786704636184526;
            p = p * x - (795164235651350426258249787498 << 96);
            // We leave p in 2**192 basis so we don't need to scale it back up for the division.
            // q is monic by convention.
            int256 q = x + 5573035233440673466300451813936;
            q = ((q * x) >> 96) + 71694874799317883764090561454958;
            q = ((q * x) >> 96) + 283447036172924575727196451306956;
            q = ((q * x) >> 96) + 401686690394027663651624208769553;
            q = ((q * x) >> 96) + 204048457590392012362485061816622;
            q = ((q * x) >> 96) + 31853899698501571402653359427138;
            q = ((q * x) >> 96) + 909429971244387300277376558375;
            assembly {
                // Div in assembly because solidity adds a zero check despite the unchecked.
                // The q polynomial is known not to have zeros in the domain.
                // No scaling required because p is already 2**96 too large.
                r := sdiv(p, q)
            }
            // r is in the range (0, 0.125) * 2**96
            // Finalization, we need to:
            // * multiply by the scale factor s = 5.549…
            // * add ln(2**96 / 10**18)
            // * add k * ln(2)
            // * multiply by 10**18 / 2**96 = 5**18 >> 78
            // mul s * 5e18 * 2**96, base is now 5**18 * 2**192
            r *= 1677202110996718588342820967067443963516166;
            // add ln(2) * k * 5e18 * 2**192
            r += 16597577552685614221487285958193947469193820559219878177908093499208371 * k;
            // add ln(2**96 / 10**18) * 5e18 * 2**192
            r += 600920179829731861736702779321621459595472258049074101567377883020018308;
            // base conversion: mul 2**18 / 2**192
            r >>= 174;
        }
    }
    /*//////////////////////////////////////////////////////////////
                    LOW LEVEL FIXED POINT OPERATIONS
    //////////////////////////////////////////////////////////////*/
    function mulDivDown(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        assembly {
            // Store x * y in z for now.
            z := mul(x, y)
            // Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
            if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
                revert(0, 0)
            }
            // Divide z by the denominator.
            z := div(z, denominator)
        }
    }
    function mulDivUp(
        uint256 x,
        uint256 y,
        uint256 denominator
    ) internal pure returns (uint256 z) {
        assembly {
            // Store x * y in z for now.
            z := mul(x, y)
            // Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
            if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
                revert(0, 0)
            }
            // First, divide z - 1 by the denominator and add 1.
            // We allow z - 1 to underflow if z is 0, because we multiply the
            // end result by 0 if z is zero, ensuring we return 0 if z is zero.
            z := mul(iszero(iszero(z)), add(div(sub(z, 1), denominator), 1))
        }
    }
    function rpow(
        uint256 x,
        uint256 n,
        uint256 scalar
    ) internal pure returns (uint256 z) {
        assembly {
            switch x
            case 0 {
                switch n
                case 0 {
                    // 0 ** 0 = 1
                    z := scalar
                }
                default {
                    // 0 ** n = 0
                    z := 0
                }
            }
            default {
                switch mod(n, 2)
                case 0 {
                    // If n is even, store scalar in z for now.
                    z := scalar
                }
                default {
                    // If n is odd, store x in z for now.
                    z := x
                }
                // Shifting right by 1 is like dividing by 2.
                let half := shr(1, scalar)
                for {
                    // Shift n right by 1 before looping to halve it.
                    n := shr(1, n)
                } n {
                    // Shift n right by 1 each iteration to halve it.
                    n := shr(1, n)
                } {
                    // Revert immediately if x ** 2 would overflow.
                    // Equivalent to iszero(eq(div(xx, x), x)) here.
                    if shr(128, x) {
                        revert(0, 0)
                    }
                    // Store x squared.
                    let xx := mul(x, x)
                    // Round to the nearest number.
                    let xxRound := add(xx, half)
                    // Revert if xx + half overflowed.
                    if lt(xxRound, xx) {
                        revert(0, 0)
                    }
                    // Set x to scaled xxRound.
                    x := div(xxRound, scalar)
                    // If n is even:
                    if mod(n, 2) {
                        // Compute z * x.
                        let zx := mul(z, x)
                        // If z * x overflowed:
                        if iszero(eq(div(zx, x), z)) {
                            // Revert if x is non-zero.
                            if iszero(iszero(x)) {
                                revert(0, 0)
                            }
                        }
                        // Round to the nearest number.
                        let zxRound := add(zx, half)
                        // Revert if zx + half overflowed.
                        if lt(zxRound, zx) {
                            revert(0, 0)
                        }
                        // Return properly scaled zxRound.
                        z := div(zxRound, scalar)
                    }
                }
            }
        }
    }
    /*//////////////////////////////////////////////////////////////
                        GENERAL NUMBER UTILITIES
    //////////////////////////////////////////////////////////////*/
    function sqrt(uint256 x) internal pure returns (uint256 z) {
        assembly {
            let y := x // We start y at x, which will help us make our initial estimate.
            z := 181 // The "correct" value is 1, but this saves a multiplication later.
            // This segment is to get a reasonable initial estimate for the Babylonian method. With a bad
            // start, the correct # of bits increases ~linearly each iteration instead of ~quadratically.
            // We check y >= 2^(k + 8) but shift right by k bits
            // each branch to ensure that if x >= 256, then y >= 256.
            if iszero(lt(y, 0x10000000000000000000000000000000000)) {
                y := shr(128, y)
                z := shl(64, z)
            }
            if iszero(lt(y, 0x1000000000000000000)) {
                y := shr(64, y)
                z := shl(32, z)
            }
            if iszero(lt(y, 0x10000000000)) {
                y := shr(32, y)
                z := shl(16, z)
            }
            if iszero(lt(y, 0x1000000)) {
                y := shr(16, y)
                z := shl(8, z)
            }
            // Goal was to get z*z*y within a small factor of x. More iterations could
            // get y in a tighter range. Currently, we will have y in [256, 256*2^16).
            // We ensured y >= 256 so that the relative difference between y and y+1 is small.
            // That's not possible if x < 256 but we can just verify those cases exhaustively.
            // Now, z*z*y <= x < z*z*(y+1), and y <= 2^(16+8), and either y >= 256, or x < 256.
            // Correctness can be checked exhaustively for x < 256, so we assume y >= 256.
            // Then z*sqrt(y) is within sqrt(257)/sqrt(256) of sqrt(x), or about 20bps.
            // For s in the range [1/256, 256], the estimate f(s) = (181/1024) * (s+1) is in the range
            // (1/2.84 * sqrt(s), 2.84 * sqrt(s)), with largest error when s = 1 and when s = 256 or 1/256.
            // Since y is in [256, 256*2^16), let a = y/65536, so that a is in [1/256, 256). Then we can estimate
            // sqrt(y) using sqrt(65536) * 181/1024 * (a + 1) = 181/4 * (y + 65536)/65536 = 181 * (y + 65536)/2^18.
            // There is no overflow risk here since y < 2^136 after the first branch above.
            z := shr(18, mul(z, add(y, 65536))) // A mul() is saved from starting z at 181.
            // Given the worst case multiplicative error of 2.84 above, 7 iterations should be enough.
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            z := shr(1, add(z, div(x, z)))
            // If x+1 is a perfect square, the Babylonian method cycles between
            // floor(sqrt(x)) and ceil(sqrt(x)). This statement ensures we return floor.
            // See: https://en.wikipedia.org/wiki/Integer_square_root#Using_only_integer_division
            // Since the ceil is rare, we save gas on the assignment and repeat division in the rare case.
            // If you don't care whether the floor or ceil square root is returned, you can remove this statement.
            z := sub(z, lt(div(x, z), z))
        }
    }
    function log2(uint256 x) internal pure returns (uint256 r) {
        require(x > 0, "UNDEFINED");
        assembly {
            r := shl(7, lt(0xffffffffffffffffffffffffffffffff, x))
            r := or(r, shl(6, lt(0xffffffffffffffff, shr(r, x))))
            r := or(r, shl(5, lt(0xffffffff, shr(r, x))))
            r := or(r, shl(4, lt(0xffff, shr(r, x))))
            r := or(r, shl(3, lt(0xff, shr(r, x))))
            r := or(r, shl(2, lt(0xf, shr(r, x))))
            r := or(r, shl(1, lt(0x3, shr(r, x))))
            r := or(r, lt(0x1, shr(r, x)))
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @custom:attribution https://github.com/bakaoh/solidity-rlp-encode
/// @title RLPWriter
/// @author RLPWriter is a library for encoding Solidity types to RLP bytes. Adapted from Bakaoh's
///         RLPEncode library (https://github.com/bakaoh/solidity-rlp-encode) with minor
///         modifications to improve legibility.
library RLPWriter {
    /// @notice RLP encodes a byte string.
    /// @param _in The byte string to encode.
    /// @return out_ The RLP encoded string in bytes.
    function writeBytes(bytes memory _in) internal pure returns (bytes memory out_) {
        if (_in.length == 1 && uint8(_in[0]) < 128) {
            out_ = _in;
        } else {
            out_ = abi.encodePacked(_writeLength(_in.length, 128), _in);
        }
    }
    /// @notice RLP encodes a list of RLP encoded byte byte strings.
    /// @param _in The list of RLP encoded byte strings.
    /// @return list_ The RLP encoded list of items in bytes.
    function writeList(bytes[] memory _in) internal pure returns (bytes memory list_) {
        list_ = _flatten(_in);
        list_ = abi.encodePacked(_writeLength(list_.length, 192), list_);
    }
    /// @notice RLP encodes a string.
    /// @param _in The string to encode.
    /// @return out_ The RLP encoded string in bytes.
    function writeString(string memory _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(bytes(_in));
    }
    /// @notice RLP encodes an address.
    /// @param _in The address to encode.
    /// @return out_ The RLP encoded address in bytes.
    function writeAddress(address _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(abi.encodePacked(_in));
    }
    /// @notice RLP encodes a uint.
    /// @param _in The uint256 to encode.
    /// @return out_ The RLP encoded uint256 in bytes.
    function writeUint(uint256 _in) internal pure returns (bytes memory out_) {
        out_ = writeBytes(_toBinary(_in));
    }
    /// @notice RLP encodes a bool.
    /// @param _in The bool to encode.
    /// @return out_ The RLP encoded bool in bytes.
    function writeBool(bool _in) internal pure returns (bytes memory out_) {
        out_ = new bytes(1);
        out_[0] = (_in ? bytes1(0x01) : bytes1(0x80));
    }
    /// @notice Encode the first byte and then the `len` in binary form if `length` is more than 55.
    /// @param _len    The length of the string or the payload.
    /// @param _offset 128 if item is string, 192 if item is list.
    /// @return out_ RLP encoded bytes.
    function _writeLength(uint256 _len, uint256 _offset) private pure returns (bytes memory out_) {
        if (_len < 56) {
            out_ = new bytes(1);
            out_[0] = bytes1(uint8(_len) + uint8(_offset));
        } else {
            uint256 lenLen;
            uint256 i = 1;
            while (_len / i != 0) {
                lenLen++;
                i *= 256;
            }
            out_ = new bytes(lenLen + 1);
            out_[0] = bytes1(uint8(lenLen) + uint8(_offset) + 55);
            for (i = 1; i <= lenLen; i++) {
                out_[i] = bytes1(uint8((_len / (256 ** (lenLen - i))) % 256));
            }
        }
    }
    /// @notice Encode integer in big endian binary form with no leading zeroes.
    /// @param _x The integer to encode.
    /// @return out_ RLP encoded bytes.
    function _toBinary(uint256 _x) private pure returns (bytes memory out_) {
        bytes memory b = abi.encodePacked(_x);
        uint256 i = 0;
        for (; i < 32; i++) {
            if (b[i] != 0) {
                break;
            }
        }
        out_ = new bytes(32 - i);
        for (uint256 j = 0; j < out_.length; j++) {
            out_[j] = b[i++];
        }
    }
    /// @custom:attribution https://github.com/Arachnid/solidity-stringutils
    /// @notice Copies a piece of memory to another location.
    /// @param _dest Destination location.
    /// @param _src  Source location.
    /// @param _len  Length of memory to copy.
    function _memcpy(uint256 _dest, uint256 _src, uint256 _len) private pure {
        uint256 dest = _dest;
        uint256 src = _src;
        uint256 len = _len;
        for (; len >= 32; len -= 32) {
            assembly {
                mstore(dest, mload(src))
            }
            dest += 32;
            src += 32;
        }
        uint256 mask;
        unchecked {
            mask = 256 ** (32 - len) - 1;
        }
        assembly {
            let srcpart := and(mload(src), not(mask))
            let destpart := and(mload(dest), mask)
            mstore(dest, or(destpart, srcpart))
        }
    }
    /// @custom:attribution https://github.com/sammayo/solidity-rlp-encoder
    /// @notice Flattens a list of byte strings into one byte string.
    /// @param _list List of byte strings to flatten.
    /// @return out_ The flattened byte string.
    function _flatten(bytes[] memory _list) private pure returns (bytes memory out_) {
        if (_list.length == 0) {
            return new bytes(0);
        }
        uint256 len;
        uint256 i = 0;
        for (; i < _list.length; i++) {
            len += _list[i].length;
        }
        out_ = new bytes(len);
        uint256 flattenedPtr;
        assembly {
            flattenedPtr := add(out_, 0x20)
        }
        for (i = 0; i < _list.length; i++) {
            bytes memory item = _list[i];
            uint256 listPtr;
            assembly {
                listPtr := add(item, 0x20)
            }
            _memcpy(flattenedPtr, listPtr, item.length);
            flattenedPtr += _list[i].length;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Bytes
/// @notice Bytes is a library for manipulating byte arrays.
library Bytes {
    /// @custom:attribution https://github.com/GNSPS/solidity-bytes-utils
    /// @notice Slices a byte array with a given starting index and length. Returns a new byte array
    ///         as opposed to a pointer to the original array. Will throw if trying to slice more
    ///         bytes than exist in the array.
    /// @param _bytes Byte array to slice.
    /// @param _start Starting index of the slice.
    /// @param _length Length of the slice.
    /// @return Slice of the input byte array.
    function slice(bytes memory _bytes, uint256 _start, uint256 _length) internal pure returns (bytes memory) {
        unchecked {
            require(_length + 31 >= _length, "slice_overflow");
            require(_start + _length >= _start, "slice_overflow");
            require(_bytes.length >= _start + _length, "slice_outOfBounds");
        }
        bytes memory tempBytes;
        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)
                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)
                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)
                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } { mstore(mc, mload(cc)) }
                mstore(tempBytes, _length)
                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)
                mstore(0x40, add(tempBytes, 0x20))
            }
        }
        return tempBytes;
    }
    /// @notice Slices a byte array with a given starting index up to the end of the original byte
    ///         array. Returns a new array rathern than a pointer to the original.
    /// @param _bytes Byte array to slice.
    /// @param _start Starting index of the slice.
    /// @return Slice of the input byte array.
    function slice(bytes memory _bytes, uint256 _start) internal pure returns (bytes memory) {
        if (_start >= _bytes.length) {
            return bytes("");
        }
        return slice(_bytes, _start, _bytes.length - _start);
    }
    /// @notice Converts a byte array into a nibble array by splitting each byte into two nibbles.
    ///         Resulting nibble array will be exactly twice as long as the input byte array.
    /// @param _bytes Input byte array to convert.
    /// @return Resulting nibble array.
    function toNibbles(bytes memory _bytes) internal pure returns (bytes memory) {
        bytes memory _nibbles;
        assembly {
            // Grab a free memory offset for the new array
            _nibbles := mload(0x40)
            // Load the length of the passed bytes array from memory
            let bytesLength := mload(_bytes)
            // Calculate the length of the new nibble array
            // This is the length of the input array times 2
            let nibblesLength := shl(0x01, bytesLength)
            // Update the free memory pointer to allocate memory for the new array.
            // To do this, we add the length of the new array + 32 bytes for the array length
            // rounded up to the nearest 32 byte boundary to the current free memory pointer.
            mstore(0x40, add(_nibbles, and(not(0x1F), add(nibblesLength, 0x3F))))
            // Store the length of the new array in memory
            mstore(_nibbles, nibblesLength)
            // Store the memory offset of the _bytes array's contents on the stack
            let bytesStart := add(_bytes, 0x20)
            // Store the memory offset of the nibbles array's contents on the stack
            let nibblesStart := add(_nibbles, 0x20)
            // Loop through each byte in the input array
            for { let i := 0x00 } lt(i, bytesLength) { i := add(i, 0x01) } {
                // Get the starting offset of the next 2 bytes in the nibbles array
                let offset := add(nibblesStart, shl(0x01, i))
                // Load the byte at the current index within the `_bytes` array
                let b := byte(0x00, mload(add(bytesStart, i)))
                // Pull out the first nibble and store it in the new array
                mstore8(offset, shr(0x04, b))
                // Pull out the second nibble and store it in the new array
                mstore8(add(offset, 0x01), and(b, 0x0F))
            }
        }
        return _nibbles;
    }
    /// @notice Compares two byte arrays by comparing their keccak256 hashes.
    /// @param _bytes First byte array to compare.
    /// @param _other Second byte array to compare.
    /// @return True if the two byte arrays are equal, false otherwise.
    function equal(bytes memory _bytes, bytes memory _other) internal pure returns (bool) {
        return keccak256(_bytes) == keccak256(_other);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.8;
// Libraries
import {
    EmptyItem,
    UnexpectedString,
    InvalidDataRemainder,
    ContentLengthMismatch,
    InvalidHeader,
    UnexpectedList
} from "src/libraries/rlp/RLPErrors.sol";
/// @custom:attribution https://github.com/hamdiallam/Solidity-RLP
/// @title RLPReader
/// @notice RLPReader is a library for parsing RLP-encoded byte arrays into Solidity types. Adapted
///         from Solidity-RLP (https://github.com/hamdiallam/Solidity-RLP) by Hamdi Allam with
///         various tweaks to improve readability.
library RLPReader {
    /// @notice Custom pointer type to avoid confusion between pointers and uint256s.
    type MemoryPointer is uint256;
    /// @notice RLP item types.
    /// @custom:value DATA_ITEM Represents an RLP data item (NOT a list).
    /// @custom:value LIST_ITEM Represents an RLP list item.
    enum RLPItemType {
        DATA_ITEM,
        LIST_ITEM
    }
    /// @notice Struct representing an RLP item.
    /// @custom:field length Length of the RLP item.
    /// @custom:field ptr    Pointer to the RLP item in memory.
    struct RLPItem {
        uint256 length;
        MemoryPointer ptr;
    }
    /// @notice Max list length that this library will accept.
    uint256 internal constant MAX_LIST_LENGTH = 32;
    /// @notice Converts bytes to a reference to memory position and length.
    /// @param _in Input bytes to convert.
    /// @return out_ Output memory reference.
    function toRLPItem(bytes memory _in) internal pure returns (RLPItem memory out_) {
        // Empty arrays are not RLP items.
        if (_in.length == 0) revert EmptyItem();
        MemoryPointer ptr;
        assembly {
            ptr := add(_in, 32)
        }
        out_ = RLPItem({ length: _in.length, ptr: ptr });
    }
    /// @notice Reads an RLP list value into a list of RLP items.
    /// @param _in RLP list value.
    /// @return out_ Decoded RLP list items.
    function readList(RLPItem memory _in) internal pure returns (RLPItem[] memory out_) {
        (uint256 listOffset, uint256 listLength, RLPItemType itemType) = _decodeLength(_in);
        if (itemType != RLPItemType.LIST_ITEM) revert UnexpectedString();
        if (listOffset + listLength != _in.length) revert InvalidDataRemainder();
        // Solidity in-memory arrays can't be increased in size, but *can* be decreased in size by
        // writing to the length. Since we can't know the number of RLP items without looping over
        // the entire input, we'd have to loop twice to accurately size this array. It's easier to
        // simply set a reasonable maximum list length and decrease the size before we finish.
        out_ = new RLPItem[](MAX_LIST_LENGTH);
        uint256 itemCount = 0;
        uint256 offset = listOffset;
        while (offset < _in.length) {
            (uint256 itemOffset, uint256 itemLength,) = _decodeLength(
                RLPItem({ length: _in.length - offset, ptr: MemoryPointer.wrap(MemoryPointer.unwrap(_in.ptr) + offset) })
            );
            // We don't need to check itemCount < out.length explicitly because Solidity already
            // handles this check on our behalf, we'd just be wasting gas.
            out_[itemCount] = RLPItem({
                length: itemLength + itemOffset,
                ptr: MemoryPointer.wrap(MemoryPointer.unwrap(_in.ptr) + offset)
            });
            itemCount += 1;
            offset += itemOffset + itemLength;
        }
        // Decrease the array size to match the actual item count.
        assembly {
            mstore(out_, itemCount)
        }
    }
    /// @notice Reads an RLP list value into a list of RLP items.
    /// @param _in RLP list value.
    /// @return out_ Decoded RLP list items.
    function readList(bytes memory _in) internal pure returns (RLPItem[] memory out_) {
        out_ = readList(toRLPItem(_in));
    }
    /// @notice Reads an RLP bytes value into bytes.
    /// @param _in RLP bytes value.
    /// @return out_ Decoded bytes.
    function readBytes(RLPItem memory _in) internal pure returns (bytes memory out_) {
        (uint256 itemOffset, uint256 itemLength, RLPItemType itemType) = _decodeLength(_in);
        if (itemType != RLPItemType.DATA_ITEM) revert UnexpectedList();
        if (_in.length != itemOffset + itemLength) revert InvalidDataRemainder();
        out_ = _copy(_in.ptr, itemOffset, itemLength);
    }
    /// @notice Reads an RLP bytes value into bytes.
    /// @param _in RLP bytes value.
    /// @return out_ Decoded bytes.
    function readBytes(bytes memory _in) internal pure returns (bytes memory out_) {
        out_ = readBytes(toRLPItem(_in));
    }
    /// @notice Reads the raw bytes of an RLP item.
    /// @param _in RLP item to read.
    /// @return out_ Raw RLP bytes.
    function readRawBytes(RLPItem memory _in) internal pure returns (bytes memory out_) {
        out_ = _copy(_in.ptr, 0, _in.length);
    }
    /// @notice Decodes the length of an RLP item.
    /// @param _in RLP item to decode.
    /// @return offset_ Offset of the encoded data.
    /// @return length_ Length of the encoded data.
    /// @return type_ RLP item type (LIST_ITEM or DATA_ITEM).
    function _decodeLength(RLPItem memory _in)
        private
        pure
        returns (uint256 offset_, uint256 length_, RLPItemType type_)
    {
        // Short-circuit if there's nothing to decode, note that we perform this check when
        // the user creates an RLP item via toRLPItem, but it's always possible for them to bypass
        // that function and create an RLP item directly. So we need to check this anyway.
        if (_in.length == 0) revert EmptyItem();
        MemoryPointer ptr = _in.ptr;
        uint256 prefix;
        assembly {
            prefix := byte(0, mload(ptr))
        }
        if (prefix <= 0x7f) {
            // Single byte.
            return (0, 1, RLPItemType.DATA_ITEM);
        } else if (prefix <= 0xb7) {
            // Short string.
            // slither-disable-next-line variable-scope
            uint256 strLen = prefix - 0x80;
            if (_in.length <= strLen) revert ContentLengthMismatch();
            bytes1 firstByteOfContent;
            assembly {
                firstByteOfContent := and(mload(add(ptr, 1)), shl(248, 0xff))
            }
            if (strLen == 1 && firstByteOfContent < 0x80) revert InvalidHeader();
            return (1, strLen, RLPItemType.DATA_ITEM);
        } else if (prefix <= 0xbf) {
            // Long string.
            uint256 lenOfStrLen = prefix - 0xb7;
            if (_in.length <= lenOfStrLen) revert ContentLengthMismatch();
            bytes1 firstByteOfContent;
            assembly {
                firstByteOfContent := and(mload(add(ptr, 1)), shl(248, 0xff))
            }
            if (firstByteOfContent == 0x00) revert InvalidHeader();
            uint256 strLen;
            assembly {
                strLen := shr(sub(256, mul(8, lenOfStrLen)), mload(add(ptr, 1)))
            }
            if (strLen <= 55) revert InvalidHeader();
            if (_in.length <= lenOfStrLen + strLen) revert ContentLengthMismatch();
            return (1 + lenOfStrLen, strLen, RLPItemType.DATA_ITEM);
        } else if (prefix <= 0xf7) {
            // Short list.
            // slither-disable-next-line variable-scope
            uint256 listLen = prefix - 0xc0;
            if (_in.length <= listLen) revert ContentLengthMismatch();
            return (1, listLen, RLPItemType.LIST_ITEM);
        } else {
            // Long list.
            uint256 lenOfListLen = prefix - 0xf7;
            if (_in.length <= lenOfListLen) revert ContentLengthMismatch();
            bytes1 firstByteOfContent;
            assembly {
                firstByteOfContent := and(mload(add(ptr, 1)), shl(248, 0xff))
            }
            if (firstByteOfContent == 0x00) revert InvalidHeader();
            uint256 listLen;
            assembly {
                listLen := shr(sub(256, mul(8, lenOfListLen)), mload(add(ptr, 1)))
            }
            if (listLen <= 55) revert InvalidHeader();
            if (_in.length <= lenOfListLen + listLen) revert ContentLengthMismatch();
            return (1 + lenOfListLen, listLen, RLPItemType.LIST_ITEM);
        }
    }
    /// @notice Copies the bytes from a memory location.
    /// @param _src    Pointer to the location to read from.
    /// @param _offset Offset to start reading from.
    /// @param _length Number of bytes to read.
    /// @return out_ Copied bytes.
    function _copy(MemoryPointer _src, uint256 _offset, uint256 _length) private pure returns (bytes memory out_) {
        out_ = new bytes(_length);
        if (_length == 0) {
            return out_;
        }
        // Mostly based on Solidity's copy_memory_to_memory:
        // https://github.com/ethereum/solidity/blob/34dd30d71b4da730488be72ff6af7083cf2a91f6/libsolidity/codegen/YulUtilFunctions.cpp#L102-L114
        uint256 src = MemoryPointer.unwrap(_src) + _offset;
        assembly {
            let dest := add(out_, 32)
            let i := 0
            for { } lt(i, _length) { i := add(i, 32) } { mstore(add(dest, i), mload(add(src, i))) }
            if gt(i, _length) { mstore(add(dest, _length), 0) }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.15;
using LibPosition for Position global;
/// @notice A `Position` represents a position of a claim within the game tree.
/// @dev This is represented as a "generalized index" where the high-order bit
/// is the level in the tree and the remaining bits is a unique bit pattern, allowing
/// a unique identifier for each node in the tree. Mathematically, it is calculated
/// as 2^{depth} + indexAtDepth.
type Position is uint128;
/// @title LibPosition
/// @notice This library contains helper functions for working with the `Position` type.
library LibPosition {
    /// @notice the `MAX_POSITION_BITLEN` is the number of bits that the `Position` type, and the implementation of
    ///         its behavior within this library, can safely support.
    uint8 internal constant MAX_POSITION_BITLEN = 126;
    /// @notice Computes a generalized index (2^{depth} + indexAtDepth).
    /// @param _depth The depth of the position.
    /// @param _indexAtDepth The index at the depth of the position.
    /// @return position_ The computed generalized index.
    function wrap(uint8 _depth, uint128 _indexAtDepth) internal pure returns (Position position_) {
        assembly {
            // gindex = 2^{_depth} + _indexAtDepth
            position_ := add(shl(_depth, 1), _indexAtDepth)
        }
    }
    /// @notice Pulls the `depth` out of a `Position` type.
    /// @param _position The generalized index to get the `depth` of.
    /// @return depth_ The `depth` of the `position` gindex.
    /// @custom:attribution Solady <https://github.com/Vectorized/Solady>
    function depth(Position _position) internal pure returns (uint8 depth_) {
        // Return the most significant bit offset, which signifies the depth of the gindex.
        assembly {
            depth_ := or(depth_, shl(6, lt(0xffffffffffffffff, shr(depth_, _position))))
            depth_ := or(depth_, shl(5, lt(0xffffffff, shr(depth_, _position))))
            // For the remaining 32 bits, use a De Bruijn lookup.
            _position := shr(depth_, _position)
            _position := or(_position, shr(1, _position))
            _position := or(_position, shr(2, _position))
            _position := or(_position, shr(4, _position))
            _position := or(_position, shr(8, _position))
            _position := or(_position, shr(16, _position))
            depth_ :=
                or(
                    depth_,
                    byte(
                        shr(251, mul(_position, shl(224, 0x07c4acdd))),
                        0x0009010a0d15021d0b0e10121619031e080c141c0f111807131b17061a05041f
                    )
                )
        }
    }
    /// @notice Pulls the `indexAtDepth` out of a `Position` type.
    ///         The `indexAtDepth` is the left/right index of a position at a specific depth within
    ///         the binary tree, starting from index 0. For example, at gindex 2, the `depth` = 1
    ///         and the `indexAtDepth` = 0.
    /// @param _position The generalized index to get the `indexAtDepth` of.
    /// @return indexAtDepth_ The `indexAtDepth` of the `position` gindex.
    function indexAtDepth(Position _position) internal pure returns (uint128 indexAtDepth_) {
        // Return bits p_{msb-1}...p_{0}. This effectively pulls the 2^{depth} out of the gindex,
        // leaving only the `indexAtDepth`.
        uint256 msb = depth(_position);
        assembly {
            indexAtDepth_ := sub(_position, shl(msb, 1))
        }
    }
    /// @notice Get the left child of `_position`.
    /// @param _position The position to get the left position of.
    /// @return left_ The position to the left of `position`.
    function left(Position _position) internal pure returns (Position left_) {
        assembly {
            left_ := shl(1, _position)
        }
    }
    /// @notice Get the right child of `_position`
    /// @param _position The position to get the right position of.
    /// @return right_ The position to the right of `position`.
    function right(Position _position) internal pure returns (Position right_) {
        assembly {
            right_ := or(1, shl(1, _position))
        }
    }
    /// @notice Get the parent position of `_position`.
    /// @param _position The position to get the parent position of.
    /// @return parent_ The parent position of `position`.
    function parent(Position _position) internal pure returns (Position parent_) {
        assembly {
            parent_ := shr(1, _position)
        }
    }
    /// @notice Get the deepest, right most gindex relative to the `position`. This is equivalent to
    ///         calling `right` on a position until the maximum depth is reached.
    /// @param _position The position to get the relative deepest, right most gindex of.
    /// @param _maxDepth The maximum depth of the game.
    /// @return rightIndex_ The deepest, right most gindex relative to the `position`.
    function rightIndex(Position _position, uint256 _maxDepth) internal pure returns (Position rightIndex_) {
        uint256 msb = depth(_position);
        assembly {
            let remaining := sub(_maxDepth, msb)
            rightIndex_ := or(shl(remaining, _position), sub(shl(remaining, 1), 1))
        }
    }
    /// @notice Get the deepest, right most trace index relative to the `position`. This is
    ///         equivalent to calling `right` on a position until the maximum depth is reached and
    ///         then finding its index at depth.
    /// @param _position The position to get the relative trace index of.
    /// @param _maxDepth The maximum depth of the game.
    /// @return traceIndex_ The trace index relative to the `position`.
    function traceIndex(Position _position, uint256 _maxDepth) internal pure returns (uint256 traceIndex_) {
        uint256 msb = depth(_position);
        assembly {
            let remaining := sub(_maxDepth, msb)
            traceIndex_ := sub(or(shl(remaining, _position), sub(shl(remaining, 1), 1)), shl(_maxDepth, 1))
        }
    }
    /// @notice Gets the position of the highest ancestor of `_position` that commits to the same
    ///         trace index.
    /// @param _position The position to get the highest ancestor of.
    /// @return ancestor_ The highest ancestor of `position` that commits to the same trace index.
    function traceAncestor(Position _position) internal pure returns (Position ancestor_) {
        // Create a field with only the lowest unset bit of `_position` set.
        Position lsb;
        assembly {
            lsb := and(not(_position), add(_position, 1))
        }
        // Find the index of the lowest unset bit within the field.
        uint256 msb = depth(lsb);
        // The highest ancestor that commits to the same trace index is the original position
        // shifted right by the index of the lowest unset bit.
        assembly {
            let a := shr(msb, _position)
            // Bound the ancestor to the minimum gindex, 1.
            ancestor_ := or(a, iszero(a))
        }
    }
    /// @notice Gets the position of the highest ancestor of `_position` that commits to the same
    ///         trace index, while still being below `_upperBoundExclusive`.
    /// @param _position The position to get the highest ancestor of.
    /// @param _upperBoundExclusive The exclusive upper depth bound, used to inform where to stop in order
    ///                             to not escape a sub-tree.
    /// @return ancestor_ The highest ancestor of `position` that commits to the same trace index.
    function traceAncestorBounded(
        Position _position,
        uint256 _upperBoundExclusive
    )
        internal
        pure
        returns (Position ancestor_)
    {
        // This function only works for positions that are below the upper bound.
        if (_position.depth() <= _upperBoundExclusive) {
            assembly {
                // Revert with `ClaimAboveSplit()`
                mstore(0x00, 0xb34b5c22)
                revert(0x1C, 0x04)
            }
        }
        // Grab the global trace ancestor.
        ancestor_ = traceAncestor(_position);
        // If the ancestor is above or at the upper bound, shift it to be below the upper bound.
        // This should be a special case that only covers positions that commit to the final leaf
        // in a sub-tree.
        if (ancestor_.depth() <= _upperBoundExclusive) {
            ancestor_ = ancestor_.rightIndex(_upperBoundExclusive + 1);
        }
    }
    /// @notice Get the move position of `_position`, which is the left child of:
    ///         1. `_position` if `_isAttack` is true.
    ///         2. `_position | 1` if `_isAttack` is false.
    /// @param _position The position to get the relative attack/defense position of.
    /// @param _isAttack Whether or not the move is an attack move.
    /// @return move_ The move position relative to `position`.
    function move(Position _position, bool _isAttack) internal pure returns (Position move_) {
        assembly {
            move_ := shl(1, or(iszero(_isAttack), _position))
        }
    }
    /// @notice Get the value of a `Position` type in the form of the underlying uint128.
    /// @param _position The position to get the value of.
    /// @return raw_ The value of the `position` as a uint128 type.
    function raw(Position _position) internal pure returns (uint128 raw_) {
        assembly {
            raw_ := _position
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @notice The length of an RLP item must be greater than zero to be decodable
error EmptyItem();
/// @notice The decoded item type for list is not a list item
error UnexpectedString();
/// @notice The RLP item has an invalid data remainder
error InvalidDataRemainder();
/// @notice Decoded item type for bytes is not a string item
error UnexpectedList();
/// @notice The length of the content must be greater than the RLP item length
error ContentLengthMismatch();
/// @notice Invalid RLP header for RLP item
error InvalidHeader();

// SPDX-License-Identifier: MIT
pragma solidity 0.8.15;
/**
 * @title Proxy
 * @notice Proxy is a transparent proxy that passes through the call if the caller is the owner or
 *         if the caller is address(0), meaning that the call originated from an off-chain
 *         simulation.
 */
contract Proxy {
    /**
     * @notice The storage slot that holds the address of the implementation.
     *         bytes32(uint256(keccak256('eip1967.proxy.implementation')) - 1)
     */
    bytes32 internal constant IMPLEMENTATION_KEY =
        0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
    /**
     * @notice The storage slot that holds the address of the owner.
     *         bytes32(uint256(keccak256('eip1967.proxy.admin')) - 1)
     */
    bytes32 internal constant OWNER_KEY =
        0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
    /**
     * @notice An event that is emitted each time the implementation is changed. This event is part
     *         of the EIP-1967 specification.
     *
     * @param implementation The address of the implementation contract
     */
    event Upgraded(address indexed implementation);
    /**
     * @notice An event that is emitted each time the owner is upgraded. This event is part of the
     *         EIP-1967 specification.
     *
     * @param previousAdmin The previous owner of the contract
     * @param newAdmin      The new owner of the contract
     */
    event AdminChanged(address previousAdmin, address newAdmin);
    /**
     * @notice A modifier that reverts if not called by the owner or by address(0) to allow
     *         eth_call to interact with this proxy without needing to use low-level storage
     *         inspection. We assume that nobody is able to trigger calls from address(0) during
     *         normal EVM execution.
     */
    modifier proxyCallIfNotAdmin() {
        if (msg.sender == _getAdmin() || msg.sender == address(0)) {
            _;
        } else {
            // This WILL halt the call frame on completion.
            _doProxyCall();
        }
    }
    /**
     * @notice Sets the initial admin during contract deployment. Admin address is stored at the
     *         EIP-1967 admin storage slot so that accidental storage collision with the
     *         implementation is not possible.
     *
     * @param _admin Address of the initial contract admin. Admin as the ability to access the
     *               transparent proxy interface.
     */
    constructor(address _admin) {
        _changeAdmin(_admin);
    }
    // slither-disable-next-line locked-ether
    receive() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    // slither-disable-next-line locked-ether
    fallback() external payable {
        // Proxy call by default.
        _doProxyCall();
    }
    /**
     * @notice Set the implementation contract address. The code at the given address will execute
     *         when this contract is called.
     *
     * @param _implementation Address of the implementation contract.
     */
    function upgradeTo(address _implementation) public virtual proxyCallIfNotAdmin {
        _setImplementation(_implementation);
    }
    /**
     * @notice Set the implementation and call a function in a single transaction. Useful to ensure
     *         atomic execution of initialization-based upgrades.
     *
     * @param _implementation Address of the implementation contract.
     * @param _data           Calldata to delegatecall the new implementation with.
     */
    function upgradeToAndCall(address _implementation, bytes calldata _data)
        public
        payable
        virtual
        proxyCallIfNotAdmin
        returns (bytes memory)
    {
        _setImplementation(_implementation);
        (bool success, bytes memory returndata) = _implementation.delegatecall(_data);
        require(success, "Proxy: delegatecall to new implementation contract failed");
        return returndata;
    }
    /**
     * @notice Changes the owner of the proxy contract. Only callable by the owner.
     *
     * @param _admin New owner of the proxy contract.
     */
    function changeAdmin(address _admin) public virtual proxyCallIfNotAdmin {
        _changeAdmin(_admin);
    }
    /**
     * @notice Gets the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function admin() public virtual proxyCallIfNotAdmin returns (address) {
        return _getAdmin();
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function implementation() public virtual proxyCallIfNotAdmin returns (address) {
        return _getImplementation();
    }
    /**
     * @notice Sets the implementation address.
     *
     * @param _implementation New implementation address.
     */
    function _setImplementation(address _implementation) internal {
        assembly {
            sstore(IMPLEMENTATION_KEY, _implementation)
        }
        emit Upgraded(_implementation);
    }
    /**
     * @notice Changes the owner of the proxy contract.
     *
     * @param _admin New owner of the proxy contract.
     */
    function _changeAdmin(address _admin) internal {
        address previous = _getAdmin();
        assembly {
            sstore(OWNER_KEY, _admin)
        }
        emit AdminChanged(previous, _admin);
    }
    /**
     * @notice Performs the proxy call via a delegatecall.
     */
    function _doProxyCall() internal {
        address impl = _getImplementation();
        require(impl != address(0), "Proxy: implementation not initialized");
        assembly {
            // Copy calldata into memory at 0x0....calldatasize.
            calldatacopy(0x0, 0x0, calldatasize())
            // Perform the delegatecall, make sure to pass all available gas.
            let success := delegatecall(gas(), impl, 0x0, calldatasize(), 0x0, 0x0)
            // Copy returndata into memory at 0x0....returndatasize. Note that this *will*
            // overwrite the calldata that we just copied into memory but that doesn't really
            // matter because we'll be returning in a second anyway.
            returndatacopy(0x0, 0x0, returndatasize())
            // Success == 0 means a revert. We'll revert too and pass the data up.
            if iszero(success) {
                revert(0x0, returndatasize())
            }
            // Otherwise we'll just return and pass the data up.
            return(0x0, returndatasize())
        }
    }
    /**
     * @notice Queries the implementation address.
     *
     * @return Implementation address.
     */
    function _getImplementation() internal view returns (address) {
        address impl;
        assembly {
            impl := sload(IMPLEMENTATION_KEY)
        }
        return impl;
    }
    /**
     * @notice Queries the owner of the proxy contract.
     *
     * @return Owner address.
     */
    function _getAdmin() internal view returns (address) {
        address owner;
        assembly {
            owner := sload(OWNER_KEY)
        }
        return owner;
    }
}