pragma solidity 0.4.24;

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Basic.sol

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * See https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
  function totalSupply() public view returns (uint256);
  function balanceOf(address _who) public view returns (uint256);
  function transfer(address _to, uint256 _value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {

  /**
  * @dev Multiplies two numbers, throws on overflow.
  */
  function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
    // Gas optimization: this is cheaper than asserting 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
    if (_a == 0) {
      return 0;
    }

    c = _a * _b;
    assert(c / _a == _b);
    return c;
  }

  /**
  * @dev Integer division of two numbers, truncating the quotient.
  */
  function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
    // assert(_b > 0); // Solidity automatically throws when dividing by 0
    // uint256 c = _a / _b;
    // assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
    return _a / _b;
  }

  /**
  * @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
  */
  function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
    assert(_b <= _a);
    return _a - _b;
  }

  /**
  * @dev Adds two numbers, throws on overflow.
  */
  function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
    c = _a + _b;
    assert(c >= _a);
    return c;
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/BasicToken.sol

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) internal balances;

  uint256 internal totalSupply_;

  /**
  * @dev Total number of tokens in existence
  */
  function totalSupply() public view returns (uint256) {
    return totalSupply_;
  }

  /**
  * @dev Transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(_value <= balances[msg.sender]);
    require(_to != address(0));

    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    emit Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) public view returns (uint256) {
    return balances[_owner];
  }

}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address _owner, address _spender)
    public view returns (uint256);

  function transferFrom(address _from, address _to, uint256 _value)
    public returns (bool);

  function approve(address _spender, uint256 _value) public returns (bool);
  event Approval(
    address indexed owner,
    address indexed spender,
    uint256 value
  );
}

// File: openzeppelin-solidity/contracts/token/ERC20/StandardToken.sol

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/issues/20
 * Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 */
contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    returns (bool)
  {
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);
    require(_to != address(0));

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    emit Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    emit Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(
    address _owner,
    address _spender
   )
    public
    view
    returns (uint256)
  {
    return allowed[_owner][_spender];
  }

  /**
   * @dev Increase the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _addedValue The amount of tokens to increase the allowance by.
   */
  function increaseApproval(
    address _spender,
    uint256 _addedValue
  )
    public
    returns (bool)
  {
    allowed[msg.sender][_spender] = (
      allowed[msg.sender][_spender].add(_addedValue));
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  /**
   * @dev Decrease the amount of tokens that an owner allowed to a spender.
   * approve should be called when allowed[_spender] == 0. To decrement
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   * @param _spender The address which will spend the funds.
   * @param _subtractedValue The amount of tokens to decrease the allowance by.
   */
  function decreaseApproval(
    address _spender,
    uint256 _subtractedValue
  )
    public
    returns (bool)
  {
    uint256 oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue >= oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}

// File: openzeppelin-solidity/contracts/token/ERC20/DetailedERC20.sol

/**
 * @title DetailedERC20 token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract DetailedERC20 is ERC20 {
  string public name;
  string public symbol;
  uint8 public decimals;

  constructor(string _name, string _symbol, uint8 _decimals) public {
    name = _name;
    symbol = _symbol;
    decimals = _decimals;
  }
}

// File: openzeppelin-solidity/contracts/ownership/Ownable.sol

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
  address public owner;


  event OwnershipRenounced(address indexed previousOwner);
  event OwnershipTransferred(
    address indexed previousOwner,
    address indexed newOwner
  );


  /**
   * @dev The Ownable constructor sets the original `owner` of the contract to the sender
   * account.
   */
  constructor() public {
    owner = msg.sender;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Allows the current owner to relinquish control of the contract.
   * @notice Renouncing to ownership will leave the contract without an owner.
   * It will not be possible to call the functions with the `onlyOwner`
   * modifier anymore.
   */
  function renounceOwnership() public onlyOwner {
    emit OwnershipRenounced(owner);
    owner = address(0);
  }

  /**
   * @dev Allows the current owner to transfer control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function transferOwnership(address _newOwner) public onlyOwner {
    _transferOwnership(_newOwner);
  }

  /**
   * @dev Transfers control of the contract to a newOwner.
   * @param _newOwner The address to transfer ownership to.
   */
  function _transferOwnership(address _newOwner) internal {
    require(_newOwner != address(0));
    emit OwnershipTransferred(owner, _newOwner);
    owner = _newOwner;
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/MintableToken.sol

/**
 * @title Mintable token
 * @dev Simple ERC20 Token example, with mintable token creation
 * Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
 */
contract MintableToken is StandardToken, Ownable {
  event Mint(address indexed to, uint256 amount);
  event MintFinished();

  bool public mintingFinished = false;


  modifier canMint() {
    require(!mintingFinished);
    _;
  }

  modifier hasMintPermission() {
    require(msg.sender == owner);
    _;
  }

  /**
   * @dev Function to mint tokens
   * @param _to The address that will receive the minted tokens.
   * @param _amount The amount of tokens to mint.
   * @return A boolean that indicates if the operation was successful.
   */
  function mint(
    address _to,
    uint256 _amount
  )
    public
    hasMintPermission
    canMint
    returns (bool)
  {
    totalSupply_ = totalSupply_.add(_amount);
    balances[_to] = balances[_to].add(_amount);
    emit Mint(_to, _amount);
    emit Transfer(address(0), _to, _amount);
    return true;
  }

  /**
   * @dev Function to stop minting new tokens.
   * @return True if the operation was successful.
   */
  function finishMinting() public onlyOwner canMint returns (bool) {
    mintingFinished = true;
    emit MintFinished();
    return true;
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/BurnableToken.sol

/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract BurnableToken is BasicToken {

  event Burn(address indexed burner, uint256 value);

  /**
   * @dev Burns a specific amount of tokens.
   * @param _value The amount of token to be burned.
   */
  function burn(uint256 _value) public {
    _burn(msg.sender, _value);
  }

  function _burn(address _who, uint256 _value) internal {
    require(_value <= balances[_who]);
    // no need to require value <= totalSupply, since that would imply the
    // sender's balance is greater than the totalSupply, which *should* be an assertion failure

    balances[_who] = balances[_who].sub(_value);
    totalSupply_ = totalSupply_.sub(_value);
    emit Burn(_who, _value);
    emit Transfer(_who, address(0), _value);
  }
}

// File: openzeppelin-solidity/contracts/lifecycle/Pausable.sol

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is Ownable {
  event Pause();
  event Unpause();

  bool public paused = false;


  /**
   * @dev Modifier to make a function callable only when the contract is not paused.
   */
  modifier whenNotPaused() {
    require(!paused);
    _;
  }

  /**
   * @dev Modifier to make a function callable only when the contract is paused.
   */
  modifier whenPaused() {
    require(paused);
    _;
  }

  /**
   * @dev called by the owner to pause, triggers stopped state
   */
  function pause() public onlyOwner whenNotPaused {
    paused = true;
    emit Pause();
  }

  /**
   * @dev called by the owner to unpause, returns to normal state
   */
  function unpause() public onlyOwner whenPaused {
    paused = false;
    emit Unpause();
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/PausableToken.sol

/**
 * @title Pausable token
 * @dev StandardToken modified with pausable transfers.
 **/
contract PausableToken is StandardToken, Pausable {

  function transfer(
    address _to,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.transfer(_to, _value);
  }

  function transferFrom(
    address _from,
    address _to,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.transferFrom(_from, _to, _value);
  }

  function approve(
    address _spender,
    uint256 _value
  )
    public
    whenNotPaused
    returns (bool)
  {
    return super.approve(_spender, _value);
  }

  function increaseApproval(
    address _spender,
    uint _addedValue
  )
    public
    whenNotPaused
    returns (bool success)
  {
    return super.increaseApproval(_spender, _addedValue);
  }

  function decreaseApproval(
    address _spender,
    uint _subtractedValue
  )
    public
    whenNotPaused
    returns (bool success)
  {
    return super.decreaseApproval(_spender, _subtractedValue);
  }
}

// File: openzeppelin-solidity/contracts/ownership/Claimable.sol

/**
 * @title Claimable
 * @dev Extension for the Ownable contract, where the ownership needs to be claimed.
 * This allows the new owner to accept the transfer.
 */
contract Claimable is Ownable {
  address public pendingOwner;

  /**
   * @dev Modifier throws if called by any account other than the pendingOwner.
   */
  modifier onlyPendingOwner() {
    require(msg.sender == pendingOwner);
    _;
  }

  /**
   * @dev Allows the current owner to set the pendingOwner address.
   * @param newOwner The address to transfer ownership to.
   */
  function transferOwnership(address newOwner) public onlyOwner {
    pendingOwner = newOwner;
  }

  /**
   * @dev Allows the pendingOwner address to finalize the transfer.
   */
  function claimOwnership() public onlyPendingOwner {
    emit OwnershipTransferred(owner, pendingOwner);
    owner = pendingOwner;
    pendingOwner = address(0);
  }
}

// File: openzeppelin-solidity/contracts/token/ERC20/SafeERC20.sol

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  function safeTransfer(
    ERC20Basic _token,
    address _to,
    uint256 _value
  )
    internal
  {
    require(_token.transfer(_to, _value));
  }

  function safeTransferFrom(
    ERC20 _token,
    address _from,
    address _to,
    uint256 _value
  )
    internal
  {
    require(_token.transferFrom(_from, _to, _value));
  }

  function safeApprove(
    ERC20 _token,
    address _spender,
    uint256 _value
  )
    internal
  {
    require(_token.approve(_spender, _value));
  }
}

// File: openzeppelin-solidity/contracts/ownership/CanReclaimToken.sol

/**
 * @title Contracts that should be able to recover tokens
 * @author SylTi
 * @dev This allow a contract to recover any ERC20 token received in a contract by transferring the balance to the contract owner.
 * This will prevent any accidental loss of tokens.
 */
contract CanReclaimToken is Ownable {
  using SafeERC20 for ERC20Basic;

  /**
   * @dev Reclaim all ERC20Basic compatible tokens
   * @param _token ERC20Basic The address of the token contract
   */
  function reclaimToken(ERC20Basic _token) external onlyOwner {
    uint256 balance = _token.balanceOf(this);
    _token.safeTransfer(owner, balance);
  }

}

// File: contracts/utils/OwnableContract.sol

// empty block is used as this contract just inherits others.
contract OwnableContract is CanReclaimToken, Claimable { } /* solhint-disable-line no-empty-blocks */

// File: contracts/token/WBTC.sol

contract WBTC is StandardToken, DetailedERC20("Wrapped BTC", "WBTC", 8),
    MintableToken, BurnableToken, PausableToken, OwnableContract {

    function burn(uint value) public onlyOwner {
        super.burn(value);
    }

    function finishMinting() public onlyOwner returns (bool) {
        return false;
    }

    function renounceOwnership() public onlyOwner {
        revert("renouncing ownership is blocked");
    }
}

pragma solidity 0.7.5;

/*
    The MIT License (MIT)
    Copyright (c) 2018 Murray Software, LLC.
    Permission is hereby granted, free of charge, to any person obtaining
    a copy of this software and associated documentation files (the
    "Software"), to deal in the Software without restriction, including
    without limitation the rights to use, copy, modify, merge, publish,
    distribute, sublicense, and/or sell copies of the Software, and to
    permit persons to whom the Software is furnished to do so, subject to
    the following conditions:
    The above copyright notice and this permission notice shall be included
    in all copies or substantial portions of the Software.
    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
    IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
    CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
    TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
    SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
//solhint-disable max-line-length
//solhint-disable no-inline-assembly

contract CloneFactory {
  function createClone(address target, bytes32 salt)
    internal
    returns (address payable result)
  {
    bytes20 targetBytes = bytes20(target);
    assembly {
      // load the next free memory slot as a place to store the clone contract data
      let clone := mload(0x40)

      // The bytecode block below is responsible for contract initialization
      // during deployment, it is worth noting the proxied contract constructor will not be called during
      // the cloning procedure and that is why an initialization function needs to be called after the
      // clone is created
      mstore(
        clone,
        0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000
      )

      // This stores the address location of the implementation contract
      // so that the proxy knows where to delegate call logic to
      mstore(add(clone, 0x14), targetBytes)

      // The bytecode block is the actual code that is deployed for each clone created.
      // It forwards all calls to the already deployed implementation via a delegatecall
      mstore(
        add(clone, 0x28),
        0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000
      )

      // deploy the contract using the CREATE2 opcode
      // this deploys the minimal proxy defined above, which will proxy all
      // calls to use the logic defined in the implementation contract `target`
      result := create2(0, clone, 0x37, salt)
    }
  }

  function isClone(address target, address query)
    internal
    view
    returns (bool result)
  {
    bytes20 targetBytes = bytes20(target);
    assembly {
      // load the next free memory slot as a place to store the comparison clone
      let clone := mload(0x40)

      // The next three lines store the expected bytecode for a miniml proxy
      // that targets `target` as its implementation contract
      mstore(
        clone,
        0x363d3d373d3d3d363d7300000000000000000000000000000000000000000000
      )
      mstore(add(clone, 0xa), targetBytes)
      mstore(
        add(clone, 0x1e),
        0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000
      )

      // the next two lines store the bytecode of the contract that we are checking in memory
      let other := add(clone, 0x40)
      extcodecopy(query, other, 0, 0x2d)

      // Check if the expected bytecode equals the actual bytecode and return the result
      result := and(
        eq(mload(clone), mload(other)),
        eq(mload(add(clone, 0xd)), mload(add(other, 0xd)))
      )
    }
  }
}


/**
 * Contract that exposes the needed erc20 token functions
 */

abstract contract ERC20Interface {
  // Send _value amount of tokens to address _to
  function transfer(address _to, uint256 _value)
    public
    virtual
    returns (bool success);

  // Get the account balance of another account with address _owner
  function balanceOf(address _owner)
    public
    virtual
    view
    returns (uint256 balance);
}

// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
    function safeApprove(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('approve(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x095ea7b3, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeApprove: approve failed'
        );
    }

    function safeTransfer(
        address token,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transfer(address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0xa9059cbb, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::safeTransfer: transfer failed'
        );
    }

    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint256 value
    ) internal {
        // bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(0x23b872dd, from, to, value));
        require(
            success && (data.length == 0 || abi.decode(data, (bool))),
            'TransferHelper::transferFrom: transferFrom failed'
        );
    }

    function safeTransferETH(address to, uint256 value) internal {
        (bool success, ) = to.call{value: value}(new bytes(0));
        require(success, 'TransferHelper::safeTransferETH: ETH transfer failed');
    }
}


/**
 * Contract that will forward any incoming Ether to the creator of the contract
 *
 */
contract Forwarder {
  // Address to which any funds sent to this contract will be forwarded
  address public parentAddress;
  event ForwarderDeposited(address from, uint256 value, bytes data);

  /**
   * Initialize the contract, and sets the destination address to that of the creator
   */
  function init(address _parentAddress) external onlyUninitialized {
    parentAddress = _parentAddress;
    uint256 value = address(this).balance;

    if (value == 0) {
      return;
    }

    (bool success, ) = parentAddress.call{ value: value }('');
    require(success, 'Flush failed');
    // NOTE: since we are forwarding on initialization,
    // we don't have the context of the original sender.
    // We still emit an event about the forwarding but set
    // the sender to the forwarder itself
    emit ForwarderDeposited(address(this), value, msg.data);
  }

  /**
   * Modifier that will execute internal code block only if the sender is the parent address
   */
  modifier onlyParent {
    require(msg.sender == parentAddress, 'Only Parent');
    _;
  }

  /**
   * Modifier that will execute internal code block only if the contract has not been initialized yet
   */
  modifier onlyUninitialized {
    require(parentAddress == address(0x0), 'Already initialized');
    _;
  }

  /**
   * Default function; Gets called when data is sent but does not match any other function
   */
  fallback() external payable {
    flush();
  }

  /**
   * Default function; Gets called when Ether is deposited with no data, and forwards it to the parent address
   */
  receive() external payable {
    flush();
  }

  /**
   * Execute a token transfer of the full balance from the forwarder token to the parent address
   * @param tokenContractAddress the address of the erc20 token contract
   */
  function flushTokens(address tokenContractAddress) external onlyParent {
    ERC20Interface instance = ERC20Interface(tokenContractAddress);
    address forwarderAddress = address(this);
    uint256 forwarderBalance = instance.balanceOf(forwarderAddress);
    if (forwarderBalance == 0) {
      return;
    }

    TransferHelper.safeTransfer(
      tokenContractAddress,
      parentAddress,
      forwarderBalance
    );
  }

  /**
   * Flush the entire balance of the contract to the parent address.
   */
  function flush() public {
    uint256 value = address(this).balance;

    if (value == 0) {
      return;
    }

    (bool success, ) = parentAddress.call{ value: value }('');
    require(success, 'Flush failed');
    emit ForwarderDeposited(msg.sender, value, msg.data);
  }
}

contract ForwarderFactory is CloneFactory {
  address public implementationAddress;

  event ForwarderCreated(address newForwarderAddress, address parentAddress);

  constructor(address _implementationAddress) {
    implementationAddress = _implementationAddress;
  }

  function createForwarder(address parent, bytes32 salt) external {
    // include the signers in the salt so any contract deployed to a given address must have the same signers
    bytes32 finalSalt = keccak256(abi.encodePacked(parent, salt));

    address payable clone = createClone(implementationAddress, finalSalt);
    Forwarder(clone).init(parent);
    emit ForwarderCreated(clone, parent);
  }
}