pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract CommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) != Constants.ETH) {
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        bytes memory encodedData = abi.encodePacked(method, data);
        aggregator.functionCallWithValue(encodedData, msg.value);
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            uint256 balance = tokenFrom.balanceOf(address(this));
            _transfer(tokenFrom, balance, recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
library Constants {
    address internal constant ETH = 0x0000000000000000000000000000000000000000;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract FeeCommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet) public {
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract FeeWethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    IWETH public immutable weth;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(IWETH _weth, address payable feeWallet) public {
        weth = _weth;
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256) external;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import "../Constants.sol";
contract UniswapAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    IUniswapV2Router02 public immutable UNISWAP;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet, IUniswapV2Router02 uniswap) public {
        FEE_WALLET = feeWallet;
        UNISWAP = uniswap;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param path Used by Uniswap
     * @param deadline Timestamp at which the swap becomes invalid. Used by Uniswap
     * @param feeOnTransfer Use `supportingFeeOnTransfer` Uniswap methods
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        address[] calldata path,
        uint256 deadline,
        bool feeOnTransfer,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
        }
        if (address(tokenFrom) == Constants.ETH) {
            if (feeOnTransfer) {
                UNISWAP.swapExactETHForTokensSupportingFeeOnTransferTokens{
                    value: address(this).balance
                }(amountTo, path, address(this), deadline);
            } else {
                UNISWAP.swapExactETHForTokens{value: address(this).balance}(
                    amountTo,
                    path,
                    address(this),
                    deadline
                );
            }
        } else {
            _approveSpender(tokenFrom, address(UNISWAP), amountFrom);
            if (address(tokenTo) == Constants.ETH) {
                if (feeOnTransfer) {
                    UNISWAP.swapExactTokensForETHSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForETH(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            } else {
                if (feeOnTransfer) {
                    UNISWAP
                        .swapExactTokensForTokensSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            }
        }
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract WethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    IWETH public immutable weth;
    constructor(IWETH _weth) public {
        weth = _weth;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface ICHI is IERC20 {
    function freeUpTo(uint256 value) external returns (uint256);
    function freeFromUpTo(
        address from,
        uint256 value
    ) external returns (uint256);
    function mint(uint256 value) external;
}
  
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.0;
// We import the contract so truffle compiles it, and we have the ABI
// available when working from truffle console.
import "@openzeppelin/contracts/token/ERC20/ERC20.sol"; //helpers// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    uint8 private _decimals;
    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }
    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./ICHI.sol";
import "./Spender.sol";
/**
 * @title MetaSwap
 */
contract MetaSwap is Ownable, Pausable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    struct Adapter {
        address addr; // adapter's address
        bytes4 selector;
        bytes data; // adapter's fixed data
    }
    ICHI public immutable chi;
    Spender public immutable spender;
    // Mapping of aggregatorId to aggregator
    mapping(string => Adapter) public adapters;
    mapping(string => bool) public adapterRemoved;
    event AdapterSet(
        string indexed aggregatorId,
        address indexed addr,
        bytes4 selector,
        bytes data
    );
    event AdapterRemoved(string indexed aggregatorId);
    event Swap(string indexed aggregatorId, address indexed sender);
    constructor(ICHI _chi) public {
        chi = _chi;
        spender = new Spender();
    }
    /**
     * @dev Sets the adapter for an aggregator. It can't be changed later.
     * @param aggregatorId Aggregator's identifier
     * @param addr Address of the contract that contains the logic for this aggregator
     * @param selector The function selector of the swap function in the adapter
     * @param data Fixed abi encoded data the will be passed in each delegatecall made to the adapter
     */
    function setAdapter(
        string calldata aggregatorId,
        address addr,
        bytes4 selector,
        bytes calldata data
    ) external onlyOwner {
        require(addr.isContract(), "ADAPTER_IS_NOT_A_CONTRACT");
        require(!adapterRemoved[aggregatorId], "ADAPTER_REMOVED");
        Adapter storage adapter = adapters[aggregatorId];
        require(adapter.addr == address(0), "ADAPTER_EXISTS");
        adapter.addr = addr;
        adapter.selector = selector;
        adapter.data = data;
        emit AdapterSet(aggregatorId, addr, selector, data);
    }
    /**
     * @dev Removes the adapter for an existing aggregator. This can't be undone.
     * @param aggregatorId Aggregator's identifier
     */
    function removeAdapter(string calldata aggregatorId) external onlyOwner {
        require(
            adapters[aggregatorId].addr != address(0),
            "ADAPTER_DOES_NOT_EXIST"
        );
        delete adapters[aggregatorId];
        adapterRemoved[aggregatorId] = true;
        emit AdapterRemoved(aggregatorId);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        _swap(aggregatorId, tokenFrom, amount, data);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swapUsingGasToken(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        uint256 gas = gasleft();
        _swap(aggregatorId, tokenFrom, amount, data);
        uint256 gasSpent = 21000 + gas - gasleft() + 16 * msg.data.length;
        chi.freeFromUpTo(msg.sender, (gasSpent + 14154) / 41947);
    }
    function pauseSwaps() external onlyOwner {
        _pause();
    }
    function unpauseSwaps() external onlyOwner {
        _unpause();
    }
    function _swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) internal {
        Adapter storage adapter = adapters[aggregatorId];
        if (address(tokenFrom) != Constants.ETH) {
            tokenFrom.safeTransferFrom(msg.sender, address(spender), amount);
        }
        spender.swap{value: msg.value}(
            adapter.addr,
            abi.encodePacked(
                adapter.selector,
                abi.encode(msg.sender),
                adapter.data,
                data
            )
        );
        emit Swap(aggregatorId, msg.sender);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor () internal {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./Constants.sol";
contract Spender {
    address public immutable metaswap;
    constructor() public {
        metaswap = msg.sender;
    }
    /// @dev Receives ether from swaps
    fallback() external payable {}
    function swap(address adapter, bytes calldata data) external payable {
        require(msg.sender == metaswap, "FORBIDDEN");
        require(adapter != address(0), "ADAPTER_NOT_PROVIDED");
        _delegate(adapter, data, "ADAPTER_DELEGATECALL_FAILED");
    }
    /**
     * @dev Performs a delegatecall and bubbles up the errors, adapted from
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol
     * @param target Address of the contract to delegatecall
     * @param data Data passed in the delegatecall
     * @param errorMessage Fallback revert reason
     */
    function _delegate(
        address target,
        bytes memory data,
        string memory errorMessage
    ) private returns (bytes memory) {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
contract MockAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    event MockAdapterEvent(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    );
    function test(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    ) external payable {
        emit MockAdapterEvent(sender, valueFixed, valueDynamic);
    }
    function testRevert(
        address,
        uint256,
        uint256
    ) external payable {
        revert("SWAP_FAILED");
    }
    function testRevertNoReturnData(
        address,
        uint256,
        uint256
    ) external payable {
        revert();
    }
}
pragma solidity ^0.6.0;
// TAKEN FROM https://github.com/gnosis/mock-contract
// TODO: use their npm package once it is published for solidity 0.6
interface MockInterface {
    /**
     * @dev After calling this method, the mock will return `response` when it is called
     * with any calldata that is not mocked more specifically below
     * (e.g. using givenMethodReturn).
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenAnyReturn(bytes calldata response) external;
    function givenAnyReturnBool(bool response) external;
    function givenAnyReturnUint(uint256 response) external;
    function givenAnyReturnAddress(address response) external;
    function givenAnyRevert() external;
    function givenAnyRevertWithMessage(string calldata message) external;
    function givenAnyRunOutOfGas() external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called regardless of arguments. If the methodId and arguments
     * are mocked more specifically (using `givenMethodAndArguments`) the latter
     * will take precedence.
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenMethodReturn(bytes calldata method, bytes calldata response)
        external;
    function givenMethodReturnBool(bytes calldata method, bool response)
        external;
    function givenMethodReturnUint(bytes calldata method, uint256 response)
        external;
    function givenMethodReturnAddress(bytes calldata method, address response)
        external;
    function givenMethodRevert(bytes calldata method) external;
    function givenMethodRevertWithMessage(
        bytes calldata method,
        string calldata message
    ) external;
    function givenMethodRunOutOfGas(bytes calldata method) external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called with matching arguments. These exact calldataMocks will take
     * precedence over all other calldataMocks.
     * @param call ABI encoded calldata (methodId and arguments)
     * @param response ABI encoded response that will be returned if contract is invoked with calldata
     */
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external;
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external;
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external;
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external;
    function givenCalldataRevert(bytes calldata call) external;
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external;
    function givenCalldataRunOutOfGas(bytes calldata call) external;
    /**
     * @dev Returns the number of times anything has been called on this mock since last reset
     */
    function invocationCount() external returns (uint256);
    /**
     * @dev Returns the number of times the given method has been called on this mock since last reset
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     */
    function invocationCountForMethod(bytes calldata method)
        external
        returns (uint256);
    /**
     * @dev Returns the number of times this mock has been called with the exact calldata since last reset.
     * @param call ABI encoded calldata (methodId and arguments)
     */
    function invocationCountForCalldata(bytes calldata call)
        external
        returns (uint256);
    /**
     * @dev Resets all mocked methods and invocation counts.
     */
    function reset() external;
}
/**
 * Implementation of the MockInterface.
 */
contract MockContract is MockInterface {
    enum MockType {Return, Revert, OutOfGas}
    bytes32 public constant MOCKS_LIST_START = hex"01";
    bytes public constant MOCKS_LIST_END = "0xff";
    bytes32 public constant MOCKS_LIST_END_HASH = keccak256(MOCKS_LIST_END);
    bytes4 public constant SENTINEL_ANY_MOCKS = hex"01";
    bytes public constant DEFAULT_FALLBACK_VALUE = abi.encode(false);
    // A linked list allows easy iteration and inclusion checks
    mapping(bytes32 => bytes) calldataMocks;
    mapping(bytes => MockType) calldataMockTypes;
    mapping(bytes => bytes) calldataExpectations;
    mapping(bytes => string) calldataRevertMessage;
    mapping(bytes32 => uint256) calldataInvocations;
    mapping(bytes4 => bytes4) methodIdMocks;
    mapping(bytes4 => MockType) methodIdMockTypes;
    mapping(bytes4 => bytes) methodIdExpectations;
    mapping(bytes4 => string) methodIdRevertMessages;
    mapping(bytes32 => uint256) methodIdInvocations;
    MockType fallbackMockType;
    bytes fallbackExpectation = DEFAULT_FALLBACK_VALUE;
    string fallbackRevertMessage;
    uint256 invocations;
    uint256 resetCount;
    constructor() public {
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
    }
    function trackCalldataMock(bytes memory call) private {
        bytes32 callHash = keccak256(call);
        if (calldataMocks[callHash].length == 0) {
            calldataMocks[callHash] = calldataMocks[MOCKS_LIST_START];
            calldataMocks[MOCKS_LIST_START] = call;
        }
    }
    function trackMethodIdMock(bytes4 methodId) private {
        if (methodIdMocks[methodId] == 0x0) {
            methodIdMocks[methodId] = methodIdMocks[SENTINEL_ANY_MOCKS];
            methodIdMocks[SENTINEL_ANY_MOCKS] = methodId;
        }
    }
    function _givenAnyReturn(bytes memory response) internal {
        fallbackMockType = MockType.Return;
        fallbackExpectation = response;
    }
    function givenAnyReturn(bytes calldata response) external override {
        _givenAnyReturn(response);
    }
    function givenAnyReturnBool(bool response) external override {
        uint256 flag = response ? 1 : 0;
        _givenAnyReturn(uintToBytes(flag));
    }
    function givenAnyReturnUint(uint256 response) external override {
        _givenAnyReturn(uintToBytes(response));
    }
    function givenAnyReturnAddress(address response) external override {
        _givenAnyReturn(uintToBytes(uint256(response)));
    }
    function givenAnyRevert() external override {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = "";
    }
    function givenAnyRevertWithMessage(string calldata message)
        external
        override
    {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = message;
    }
    function givenAnyRunOutOfGas() external override {
        fallbackMockType = MockType.OutOfGas;
    }
    function _givenCalldataReturn(bytes memory call, bytes memory response)
        private
    {
        calldataMockTypes[call] = MockType.Return;
        calldataExpectations[call] = response;
        trackCalldataMock(call);
    }
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenCalldataReturn(call, response);
    }
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenCalldataReturn(call, uintToBytes(flag));
    }
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(response));
    }
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(uint256(response)));
    }
    function _givenMethodReturn(bytes memory call, bytes memory response)
        private
    {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Return;
        methodIdExpectations[method] = response;
        trackMethodIdMock(method);
    }
    function givenMethodReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenMethodReturn(call, response);
    }
    function givenMethodReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenMethodReturn(call, uintToBytes(flag));
    }
    function givenMethodReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(response));
    }
    function givenMethodReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(uint256(response)));
    }
    function givenCalldataRevert(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = "";
        trackCalldataMock(call);
    }
    function givenMethodRevert(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        trackMethodIdMock(method);
    }
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = message;
        trackCalldataMock(call);
    }
    function givenMethodRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        methodIdRevertMessages[method] = message;
        trackMethodIdMock(method);
    }
    function givenCalldataRunOutOfGas(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.OutOfGas;
        trackCalldataMock(call);
    }
    function givenMethodRunOutOfGas(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.OutOfGas;
        trackMethodIdMock(method);
    }
    function invocationCount() external override returns (uint256) {
        return invocations;
    }
    function invocationCountForMethod(bytes calldata call)
        external
        override
        returns (uint256)
    {
        bytes4 method = bytesToBytes4(call);
        return
            methodIdInvocations[keccak256(
                abi.encodePacked(resetCount, method)
            )];
    }
    function invocationCountForCalldata(bytes calldata call)
        external
        override
        returns (uint256)
    {
        return
            calldataInvocations[keccak256(abi.encodePacked(resetCount, call))];
    }
    function reset() external override {
        // Reset all exact calldataMocks
        bytes memory nextMock = calldataMocks[MOCKS_LIST_START];
        bytes32 mockHash = keccak256(nextMock);
        // We cannot compary bytes
        while (mockHash != MOCKS_LIST_END_HASH) {
            // Reset all mock maps
            calldataMockTypes[nextMock] = MockType.Return;
            calldataExpectations[nextMock] = hex"";
            calldataRevertMessage[nextMock] = "";
            // Set next mock to remove
            nextMock = calldataMocks[mockHash];
            // Remove from linked list
            calldataMocks[mockHash] = "";
            // Update mock hash
            mockHash = keccak256(nextMock);
        }
        // Clear list
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        // Reset all any calldataMocks
        bytes4 nextAnyMock = methodIdMocks[SENTINEL_ANY_MOCKS];
        while (nextAnyMock != SENTINEL_ANY_MOCKS) {
            bytes4 currentAnyMock = nextAnyMock;
            methodIdMockTypes[currentAnyMock] = MockType.Return;
            methodIdExpectations[currentAnyMock] = hex"";
            methodIdRevertMessages[currentAnyMock] = "";
            nextAnyMock = methodIdMocks[currentAnyMock];
            // Remove from linked list
            methodIdMocks[currentAnyMock] = 0x0;
        }
        // Clear list
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
        fallbackExpectation = DEFAULT_FALLBACK_VALUE;
        fallbackMockType = MockType.Return;
        invocations = 0;
        resetCount += 1;
    }
    function useAllGas() private {
        while (true) {
            bool s;
            assembly {
                //expensive call to EC multiply contract
                s := call(sub(gas(), 2000), 6, 0, 0x0, 0xc0, 0x0, 0x60)
            }
        }
    }
    function bytesToBytes4(bytes memory b) private pure returns (bytes4) {
        bytes4 out;
        for (uint256 i = 0; i < 4; i++) {
            out |= bytes4(b[i] & 0xFF) >> (i * 8);
        }
        return out;
    }
    function uintToBytes(uint256 x) private pure returns (bytes memory b) {
        b = new bytes(32);
        assembly {
            mstore(add(b, 32), x)
        }
    }
    function updateInvocationCount(
        bytes4 methodId,
        bytes memory originalMsgData
    ) public {
        require(
            msg.sender == address(this),
            "Can only be called from the contract itself"
        );
        invocations += 1;
        methodIdInvocations[keccak256(
            abi.encodePacked(resetCount, methodId)
        )] += 1;
        calldataInvocations[keccak256(
            abi.encodePacked(resetCount, originalMsgData)
        )] += 1;
    }
    fallback() external payable {
        bytes4 methodId;
        assembly {
            methodId := calldataload(0)
        }
        // First, check exact matching overrides
        if (calldataMockTypes[msg.data] == MockType.Revert) {
            revert(calldataRevertMessage[msg.data]);
        }
        if (calldataMockTypes[msg.data] == MockType.OutOfGas) {
            useAllGas();
        }
        bytes memory result = calldataExpectations[msg.data];
        // Then check method Id overrides
        if (result.length == 0) {
            if (methodIdMockTypes[methodId] == MockType.Revert) {
                revert(methodIdRevertMessages[methodId]);
            }
            if (methodIdMockTypes[methodId] == MockType.OutOfGas) {
                useAllGas();
            }
            result = methodIdExpectations[methodId];
        }
        // Last, use the fallback override
        if (result.length == 0) {
            if (fallbackMockType == MockType.Revert) {
                revert(fallbackRevertMessage);
            }
            if (fallbackMockType == MockType.OutOfGas) {
                useAllGas();
            }
            result = fallbackExpectation;
        }
        // Record invocation as separate call so we don't rollback in case we are called with STATICCALL
        (, bytes memory r) = address(this).call{gas: 100000}(
            abi.encodeWithSignature(
                "updateInvocationCount(bytes4,bytes)",
                methodId,
                msg.data
            )
        );
        assert(r.length == 0);
        assembly {
            return(add(0x20, result), mload(result))
        }
    }
}
pragma solidity ^0.6.0;
contract MockSelfDestruct {
    constructor() public payable {}
    fallback() external payable {
        selfdestruct(msg.sender);
    }
    function kill(address payable target) external payable {
        selfdestruct(target);
    }
}

{"Constants.84ef19f8.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nlibrary Constants {\r\n    address internal constant ETH = 0x0000000000000000000000000000000000000000;\r\n}\r\n"},"Spender.3372a096.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nimport \"./Constants.84ef19f8.sol\";\r\n\r\ncontract Spender {\r\n    address public immutable metaswap;\r\n\r\n    constructor() public {\r\n        metaswap = msg.sender;\r\n    }\r\n\r\n    /// @dev Receives ether from swaps\r\n    fallback() external payable {}\r\n\r\n    function swap(address adapter, bytes calldata data) external payable {\r\n        require(msg.sender == metaswap, \"FORBIDDEN\");\r\n        require(adapter != address(0), \"ADAPTER_NOT_PROVIDED\");\r\n        _delegate(adapter, data, \"ADAPTER_DELEGATECALL_FAILED\");\r\n    }\r\n\r\n    /**\r\n     * @dev Performs a delegatecall and bubbles up the errors, adapted from\r\n     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol\r\n     * @param target Address of the contract to delegatecall\r\n     * @param data Data passed in the delegatecall\r\n     * @param errorMessage Fallback revert reason\r\n     */\r\n    function _delegate(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) private returns (bytes memory) {\r\n        // solhint-disable-next-line avoid-low-level-calls\r\n        (bool success, bytes memory returndata) = target.delegatecall(data);\r\n        if (success) {\r\n            return returndata;\r\n        } else {\r\n            // Look for revert reason and bubble it up if present\r\n            if (returndata.length \u003e 0) {\r\n                // The easiest way to bubble the revert reason is using memory via assembly\r\n\r\n                // solhint-disable-next-line no-inline-assembly\r\n                assembly {\r\n                    let returndata_size := mload(returndata)\r\n                    revert(add(32, returndata), returndata_size)\r\n                }\r\n            } else {\r\n                revert(errorMessage);\r\n            }\r\n        }\r\n    }\r\n}\r\n"}}

pragma solidity 0.5.2;

// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: openzeppelin-solidity/contracts/math/SafeMath.sol

/**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
library SafeMath {
    /**
    * @dev Multiplies two unsigned integers, reverts on overflow.
    */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
    * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
    */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
    * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
    */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
    * @dev Adds two unsigned integers, reverts on overflow.
    */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
    * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
    * reverts when dividing by zero.
    */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
 * Originally based on code by FirstBlood:
 * https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 *
 * This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
 * all accounts just by listening to said events. Note that this isn't required by the specification, and other
 * compliant implementations may not do it.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowed;

    uint256 private _totalSupply;

    /**
    * @dev Total number of tokens in existence
    */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
    * @dev Gets the balance of the specified address.
    * @param owner The address to query the balance of.
    * @return An uint256 representing the amount owned by the passed address.
    */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
    * @dev Transfer token for a specified address
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = value;
        emit Approval(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
        _transfer(from, to, value);
        emit Approval(from, msg.sender, _allowed[from][msg.sender]);
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when allowed_[_spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        require(spender != address(0));

        _allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
        emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
        return true;
    }

    /**
    * @dev Transfer token for a specified addresses
    * @param from The address to transfer from.
    * @param to The address to transfer to.
    * @param value The amount to be transferred.
    */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
        _burn(account, value);
        emit Approval(account, msg.sender, _allowed[account][msg.sender]);
    }
}

// File: openzeppelin-solidity/contracts/access/Roles.sol

/**
 * @title Roles
 * @dev Library for managing addresses assigned to a Role.
 */
library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev give an account access to this role
     */
    function add(Role storage role, address account) internal {
        require(account != address(0));
        require(!has(role, account));

        role.bearer[account] = true;
    }

    /**
     * @dev remove an account's access to this role
     */
    function remove(Role storage role, address account) internal {
        require(account != address(0));
        require(has(role, account));

        role.bearer[account] = false;
    }

    /**
     * @dev check if an account has this role
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0));
        return role.bearer[account];
    }
}

// File: openzeppelin-solidity/contracts/access/roles/PauserRole.sol

contract PauserRole {
    using Roles for Roles.Role;

    event PauserAdded(address indexed account);
    event PauserRemoved(address indexed account);

    Roles.Role private _pausers;

    constructor () internal {
        _addPauser(msg.sender);
    }

    modifier onlyPauser() {
        require(isPauser(msg.sender));
        _;
    }

    function isPauser(address account) public view returns (bool) {
        return _pausers.has(account);
    }

    function addPauser(address account) public onlyPauser {
        _addPauser(account);
    }

    function renouncePauser() public {
        _removePauser(msg.sender);
    }

    function _addPauser(address account) internal {
        _pausers.add(account);
        emit PauserAdded(account);
    }

    function _removePauser(address account) internal {
        _pausers.remove(account);
        emit PauserRemoved(account);
    }
}

// File: openzeppelin-solidity/contracts/lifecycle/Pausable.sol

/**
 * @title Pausable
 * @dev Base contract which allows children to implement an emergency stop mechanism.
 */
contract Pausable is PauserRole {
    event Paused(address account);
    event Unpaused(address account);

    bool private _paused;

    constructor () internal {
        _paused = false;
    }

    /**
     * @return true if the contract is paused, false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!_paused);
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     */
    modifier whenPaused() {
        require(_paused);
        _;
    }

    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() public onlyPauser whenNotPaused {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() public onlyPauser whenPaused {
        _paused = false;
        emit Unpaused(msg.sender);
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Pausable.sol

/**
 * @title Pausable token
 * @dev ERC20 modified with pausable transfers.
 **/
contract ERC20Pausable is ERC20, Pausable {
    function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transfer(to, value);
    }

    function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
        return super.transferFrom(from, to, value);
    }

    function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
        return super.approve(spender, value);
    }

    function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
        return super.increaseAllowance(spender, addedValue);
    }

    function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
        return super.decreaseAllowance(spender, subtractedValue);
    }
}

// File: openzeppelin-solidity/contracts/token/ERC20/ERC20Detailed.sol

/**
 * @title ERC20Detailed token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @return the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @return the symbol of the token.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @return the number of decimals of the token.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}

// File: contracts/MaticToken.sol

contract MaticToken is ERC20Pausable, ERC20Detailed {
    constructor (string memory name, string memory symbol, uint8 decimals, uint256 totalSupply)
    public
    ERC20Detailed (name, symbol, decimals) {
        _mint(msg.sender, totalSupply);
    }
}

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

/*
                                                           ,▄▓▓██▌   ,╓▄▄▓▓▓▓▓▓▓▓▄▄▄,,
                                                        ,▓██▓███▓▄▓███▓╬╬╬╬╬╬╬╬╬╬╬╬╬▓███▓▄,
                                                  ▄█   ▓██╬╣███████╬▓▀╬╬▓▓▓████████████▓█████▄,
                                                 ▓██▌ ▓██╬╣██████╬▓▌  ██████████████████████▌╙╙▀ⁿ
                                                ▐████████╬▓████▓▓█╨ ▄ ╟█████████▓▓╬╬╬╬╬▓▓█████▓▄
                                  └▀▓▓▄╓        ╟█▓╣█████▓██████▀ ╓█▌ ███████▓▓▓▓▓╬╬╬╬╬╬╬╬╬╬╬╬▓██▓▄
                                     └▀████▓▄╥  ▐██╬╬██████████╙ Æ▀─ ▓███▀╚╠╬╩▀▀███████▓▓╬╬╬╬╬╬╬╬╬██▄
                                        └▀██▓▀▀█████▓╬▓██████▀     ▄█████▒╠"      └╙▓██████▓╬╬╬╬╬╬╬╬██▄
                                           └▀██▄,└╙▀▀████▌└╙    ^"▀╙╙╙"╙██      @▄    ╙▀███████╬╬╬╬╬╬╬██µ
                                              └▀██▓▄, ██▌       ╒       ╙█▓     ]▓█▓╔    ▀███████▓╬╬╬╬╬▓█▌
                                                  ▀█████       ▓         ╟█▌    ]╠██▓░▒╓   ▀████████╬╬╬╬╣█▌
                                                  ▐████      ╓█▀█▌      ,██▌    ╚Å███▓▒▒╠╓  ╙█████████╬╬╬╣█▌
                                                  └████     ▓█░░▓█      ▀▀▀    φ▒╫████▒▒▒▒╠╓  █████████▓╬╬▓█µ
                                                   ╘███µ ▌▄█▓▄▓▀`     ,▀    ,╔╠░▓██████▌╠▒▒▒φ  ██████████╬╬██
                                                   ▐████µ╙▓▀`     ,▀╙,╔╔φφφ╠░▄▓███████▌░▓╙▒▒▒╠ └██╬███████╬▓█⌐
                                                   ╫██ ▓▌         ▌φ▒▒░▓██████████████▌▒░▓╚▒▒▒╠ ▓██╬▓██████╣█▌
                                                   ██▌           ▌╔▒▒▄████████████████▒▒▒░▌╠▒▒▒≥▐██▓╬╬███████▌
                                                   ██▌      ,╓φ╠▓«▒▒▓████▀  ▀█████████▌▒▒▒╟░▒▒▒▒▐███╬╬╣████▓█▌
                                                  ▐██      ╠▒▄▓▓███▓████└     ▀████████▌▒▒░▌╚▒▒▒▐███▓╬╬████ ╙▌
                                                  ███  )  ╠▒░░░▒░╬████▀        └████████░▒▒░╬∩▒▒▓████╬╬╣███
                                                 ▓██    ╠╠▒▒▐█▀▀▌`░╫██           ███████▒▒▒▒░▒▒½█████╬╬╣███
                                                ███ ,█▄ ╠▒▒▒╫▌,▄▀,▒╫██           ╟██████▒▒▒░╣⌠▒▓█████╬╬╣██▌
                                               ╘██µ ██` ╠▒▒░██╬φ╠▄▓██`            ██████░░▌φ╠░▓█████▓╬╬▓██
                                                ╟██  .φ╠▒░▄█▀░░▄██▀└              █████▌▒╣φ▒░▓██████╬╬╣██
                                                 ▀██▄▄▄╓▄███████▀                ▐█████░▓φ▒▄███████▓╬╣██
                                                   ╙▀▀▀██▀└                      ████▓▄▀φ▄▓████████╬▓█▀
                                                                                ▓███╬╩╔╣██████████▓██└
                                                                              ╓████▀▄▓████████▀████▀
                                                                            ,▓███████████████─]██╙
                                                                         ,▄▓██████████████▀└  ╙
                                                                    ,╓▄▓███████████████▀╙
                                                             `"▀▀▀████████▀▀▀▀`▄███▀▀└
                                                                              └└



                    11\   11\                     11\             11\   11\            11\                                       11\
                  1111 |  \__|                    11 |            111\  11 |           11 |                                      11 |
                  \_11 |  11\ 1111111\   1111111\ 1111111\        1111\ 11 | 111111\ 111111\   11\  11\  11\  111111\   111111\  11 |  11\
                    11 |  11 |11  __11\ 11  _____|11  __11\       11 11\11 |11  __11\\_11  _|  11 | 11 | 11 |11  __11\ 11  __11\ 11 | 11  |
                    11 |  11 |11 |  11 |11 /      11 |  11 |      11 \1111 |11111111 | 11 |    11 | 11 | 11 |11 /  11 |11 |  \__|111111  /
                    11 |  11 |11 |  11 |11 |      11 |  11 |      11 |\111 |11   ____| 11 |11\ 11 | 11 | 11 |11 |  11 |11 |      11  _11<
                  111111\ 11 |11 |  11 |\1111111\ 11 |  11 |      11 | \11 |\1111111\  \1111  |\11111\1111  |\111111  |11 |      11 | \11\
                  \______|\__|\__|  \__| \_______|\__|  \__|      \__|  \__| \_______|  \____/  \_____\____/  \______/ \__|      \__|  \__|



                               111111\                                                               11\     11\
                              11  __11\                                                              11 |    \__|
                              11 /  11 | 111111\   111111\   111111\   111111\   111111\   111111\ 111111\   11\  111111\  1111111\
                              11111111 |11  __11\ 11  __11\ 11  __11\ 11  __11\ 11  __11\  \____11\\_11  _|  11 |11  __11\ 11  __11\
                              11  __11 |11 /  11 |11 /  11 |11 |  \__|11111111 |11 /  11 | 1111111 | 11 |    11 |11 /  11 |11 |  11 |
                              11 |  11 |11 |  11 |11 |  11 |11 |      11   ____|11 |  11 |11  __11 | 11 |11\ 11 |11 |  11 |11 |  11 |
                              11 |  11 |\1111111 |\1111111 |11 |      \1111111\ \1111111 |\1111111 | \1111  |11 |\111111  |11 |  11 |
                              \__|  \__| \____11 | \____11 |\__|       \_______| \____11 | \_______|  \____/ \__| \______/ \__|  \__|
                                        11\   11 |11\   11 |                    11\   11 |
                                        \111111  |\111111  |                    \111111  |
                                         \______/  \______/                      \______/
                                                1111111\                        11\
                                                11  __11\                       11 |
                                                11 |  11 | 111111\  11\   11\ 111111\    111111\   111111\
                                                1111111  |11  __11\ 11 |  11 |\_11  _|  11  __11\ 11  __11\
                                                11  __11< 11 /  11 |11 |  11 |  11 |    11111111 |11 |  \__|
                                                11 |  11 |11 |  11 |11 |  11 |  11 |11\ 11   ____|11 |
                                                11 |  11 |\111111  |\111111  |  \1111  |\1111111\ 11 |
                                                \__|  \__| \______/  \______/    \____/  \_______|\__|
*/

// SPDX-License-Identifier: MIT

// File contracts/interfaces/IClipperExchangeInterface.sol


pragma solidity 0.8.17;

/// @title Clipper interface subset used in swaps
interface IClipperExchangeInterface {
    struct Signature {
        uint8 v;
        bytes32 r;
        bytes32 s;
    }

    function sellEthForToken(address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external payable;
    function sellTokenForEth(address inputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
    function swap(address inputToken, address outputToken, uint256 inputAmount, uint256 outputAmount, uint256 goodUntil, address destinationAddress, Signature calldata theSignature, bytes calldata auxiliaryData) external;
}


// File contracts/helpers/RouterErrors.sol


pragma solidity 0.8.17;

library RouterErrors {
    error ReturnAmountIsNotEnough();
    error InvalidMsgValue();
    error ERC20TransferFailed();
}


// File @1inch/solidity-utils/contracts/[email protected]


pragma solidity ^0.8.0;

abstract contract EthReceiver {
    error EthDepositRejected();

    receive() external payable {
        _receive();
    }

    function _receive() internal virtual {
        // solhint-disable-next-line avoid-tx-origin
        if (msg.sender == tx.origin) revert EthDepositRejected();
    }
}


// File @openzeppelin/contracts/token/ERC20/[email protected]

// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);
}


// File @1inch/solidity-utils/contracts/interfaces/[email protected]


pragma solidity ^0.8.0;


interface IDaiLikePermit {
    function permit(address holder, address spender, uint256 nonce, uint256 expiry, bool allowed, uint8 v, bytes32 r, bytes32 s) external;
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;

library RevertReasonForwarder {
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;




library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();

    // Ensures method do not revert or return boolean `true`, admits call to non-smart-contract
    function safeTransferFrom(IERC20 token, address from, address to, uint256 amount) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }

    // Ensures method do not revert or return boolean `true`, admits call to non-smart-contract
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }

    // If `approve(from, to, amount)` fails, try to `approve(from, to, 0)` before retry
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (!_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value))
            {
                revert ForceApproveFailed();
            }
        }
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }

    function safePermit(IERC20 token, bytes calldata permit) internal {
        bool success;
        if (permit.length == 32 * 7) {
            success = _makeCalldataCall(token, IERC20Permit.permit.selector, permit);
        } else if (permit.length == 32 * 8) {
            success = _makeCalldataCall(token, IDaiLikePermit.permit.selector, permit);
        } else {
            revert SafePermitBadLength();
        }
        if (!success) RevertReasonForwarder.reRevert();
    }

    function _makeCall(IERC20 token, bytes4 selector, address to, uint256 amount) private returns(bool success) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
    }

    function _makeCalldataCall(IERC20 token, bytes4 selector, bytes calldata args) private returns(bool success) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let len := add(4, args.length)
            let data := mload(0x40)

            mstore(data, selector)
            calldatacopy(add(data, 0x04), args.offset, args.length)
            success := call(gas(), token, 0, data, len, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
    }
}


// File @1inch/solidity-utils/contracts/interfaces/[email protected]


pragma solidity ^0.8.0;

interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256 amount) external;
}


// File contracts/routers/ClipperRouter.sol


pragma solidity 0.8.17;






/// @title Clipper router that allows to use `ClipperExchangeInterface` for swaps
contract ClipperRouter is EthReceiver {
    using SafeERC20 for IERC20;

    uint256 private constant _SIGNATURE_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _SIGNATURE_V_SHIFT = 255;
    bytes6 private constant _INCH_TAG_WITH_LENGTH_PREFIX = "\x051INCH";
    IERC20 private constant _ETH = IERC20(address(0));
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(IWETH weth) {
        _WETH = weth;
    }

    /// @notice Same as `clipperSwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @dev See tests for examples
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param inputAmount Amount of source tokens to swap
    /// @param outputAmount Amount of destination tokens to receive
    /// @param goodUntil Timestamp until the swap will be valid
    /// @param r Clipper order signature (r part)
    /// @param vs Clipper order signature (vs part)
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// @return returnAmount Amount of destination tokens received
    function clipperSwapToWithPermit(
        IClipperExchangeInterface clipperExchange,
        address payable recipient,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        srcToken.safePermit(permit);
        return clipperSwapTo(clipperExchange, recipient, srcToken, dstToken, inputAmount, outputAmount, goodUntil, r, vs);
    }

    /// @notice Same as `clipperSwapTo` but uses `msg.sender` as recipient
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param inputAmount Amount of source tokens to swap
    /// @param outputAmount Amount of destination tokens to receive
    /// @param goodUntil Timestamp until the swap will be valid
    /// @param r Clipper order signature (r part)
    /// @param vs Clipper order signature (vs part)
    /// @return returnAmount Amount of destination tokens received
    function clipperSwap(
        IClipperExchangeInterface clipperExchange,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) external payable returns(uint256 returnAmount) {
        return clipperSwapTo(clipperExchange, payable(msg.sender), srcToken, dstToken, inputAmount, outputAmount, goodUntil, r, vs);
    }

    /// @notice Performs swap using Clipper exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param dstToken Destination token
    /// @param inputAmount Amount of source tokens to swap
    /// @param outputAmount Amount of destination tokens to receive
    /// @param goodUntil Timestamp until the swap will be valid
    /// @param r Clipper order signature (r part)
    /// @param vs Clipper order signature (vs part)
    /// @return returnAmount Amount of destination tokens received
    function clipperSwapTo(
        IClipperExchangeInterface clipperExchange,
        address payable recipient,
        IERC20 srcToken,
        IERC20 dstToken,
        uint256 inputAmount,
        uint256 outputAmount,
        uint256 goodUntil,
        bytes32 r,
        bytes32 vs
    ) public payable returns(uint256 returnAmount) {
        bool srcETH = srcToken == _ETH;
        if (srcETH) {
            if (msg.value != inputAmount) revert RouterErrors.InvalidMsgValue();
        } else if (srcToken == _WETH) {
            srcETH = true;
            if (msg.value != 0) revert RouterErrors.InvalidMsgValue();
            // _WETH.transferFrom(msg.sender, address(this), inputAmount);
            // _WETH.withdraw(inputAmount);
            address weth = address(_WETH);
            bytes4 transferFromSelector = _WETH.transferFrom.selector;
            bytes4 withdrawSelector = _WETH.withdraw.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, transferFromSelector)
                mstore(add(ptr, 0x04), caller())
                mstore(add(ptr, 0x24), address())
                mstore(add(ptr, 0x44), inputAmount)
                if iszero(call(gas(), weth, 0, ptr, 0x64, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }

                mstore(ptr, withdrawSelector)
                mstore(add(ptr, 0x04), inputAmount)
                if iszero(call(gas(), weth, 0, ptr, 0x24, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else {
            if (msg.value != 0) revert RouterErrors.InvalidMsgValue();
            srcToken.safeTransferFrom(msg.sender, address(clipperExchange), inputAmount);
        }

        if (srcETH) {
            // clipperExchange.sellEthForToken{value: inputAmount}(address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellEthForToken.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, selector)
                mstore(add(ptr, 0x04), dstToken)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                mstore(add(ptr, 0x84), recipient)
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x143), _INCH_TAG_WITH_LENGTH_PREFIX)
                if iszero(call(gas(), clipper, inputAmount, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        } else if (dstToken == _ETH || dstToken == _WETH) {
            // clipperExchange.sellTokenForEth(address(srcToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.sellTokenForEth.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken)
                mstore(add(ptr, 0x24), inputAmount)
                mstore(add(ptr, 0x44), outputAmount)
                mstore(add(ptr, 0x64), goodUntil)
                switch iszero(dstToken)
                case 1 {
                    mstore(add(ptr, 0x84), recipient)
                }
                default {
                    mstore(add(ptr, 0x84), address())
                }
                mstore(add(ptr, 0xa4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xc4), r)
                mstore(add(ptr, 0xe4), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x104), 0x120)
                mstore(add(ptr, 0x143), _INCH_TAG_WITH_LENGTH_PREFIX)
                if iszero(call(gas(), clipper, 0, ptr, 0x149, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }

            if (dstToken == _WETH) {
                // _WETH.deposit{value: outputAmount}();
                // _WETH.transfer(recipient, outputAmount);
                address weth = address(_WETH);
                bytes4 depositSelector = _WETH.deposit.selector;
                bytes4 transferSelector = _WETH.transfer.selector;
                /// @solidity memory-safe-assembly
                assembly { // solhint-disable-line no-inline-assembly
                    let ptr := mload(0x40)

                    mstore(ptr, depositSelector)
                    if iszero(call(gas(), weth, outputAmount, ptr, 0x04, 0, 0)) {
                        returndatacopy(ptr, 0, returndatasize())
                        revert(ptr, returndatasize())
                    }

                    mstore(ptr, transferSelector)
                    mstore(add(ptr, 0x04), recipient)
                    mstore(add(ptr, 0x24), outputAmount)
                    if iszero(call(gas(), weth, 0, ptr, 0x44, 0, 0)) {
                        returndatacopy(ptr, 0, returndatasize())
                        revert(ptr, returndatasize())
                    }
                }
            }
        } else {
            // clipperExchange.swap(address(srcToken), address(dstToken), inputAmount, outputAmount, goodUntil, recipient, signature, _INCH_TAG);
            address clipper = address(clipperExchange);
            bytes4 selector = clipperExchange.swap.selector;
            /// @solidity memory-safe-assembly
            assembly { // solhint-disable-line no-inline-assembly
                let ptr := mload(0x40)

                mstore(ptr, selector)
                mstore(add(ptr, 0x04), srcToken)
                mstore(add(ptr, 0x24), dstToken)
                mstore(add(ptr, 0x44), inputAmount)
                mstore(add(ptr, 0x64), outputAmount)
                mstore(add(ptr, 0x84), goodUntil)
                mstore(add(ptr, 0xa4), recipient)
                mstore(add(ptr, 0xc4), add(27, shr(_SIGNATURE_V_SHIFT, vs)))
                mstore(add(ptr, 0xe4), r)
                mstore(add(ptr, 0x104), and(vs, _SIGNATURE_S_MASK))
                mstore(add(ptr, 0x124), 0x140)
                mstore(add(ptr, 0x163), _INCH_TAG_WITH_LENGTH_PREFIX)
                if iszero(call(gas(), clipper, 0, ptr, 0x169, 0, 0)) {
                    returndatacopy(ptr, 0, returndatasize())
                    revert(ptr, returndatasize())
                }
            }
        }

        return outputAmount;
    }
}


// File contracts/interfaces/IAggregationExecutor.sol


pragma solidity 0.8.17;

/// @title Interface for making arbitrary calls during swap
interface IAggregationExecutor {
    /// @notice propagates information about original msg.sender and executes arbitrary data
    function execute(address msgSender) external payable;  // 0x4b64e492
}


// File @1inch/solidity-utils/contracts/interfaces/[email protected]


pragma solidity ^0.8.0;


interface IERC20MetadataUppercase {
    function NAME() external view returns (string memory);  // solhint-disable-line func-name-mixedcase
    function SYMBOL() external view returns (string memory);  // solhint-disable-line func-name-mixedcase
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;

/// @title Library with gas-efficient string operations
library StringUtil {
    function toHex(uint256 value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }

    function toHex(address value) internal pure returns (string memory) {
        return toHex(abi.encodePacked(value));
    }

    function toHex(bytes memory data) internal pure returns (string memory result) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            function _toHex16(input) -> output {
                output := or(
                    and(input, 0xFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000),
                    shr(64, and(input, 0x0000000000000000FFFFFFFFFFFFFFFF00000000000000000000000000000000))
                )
                output := or(
                    and(output, 0xFFFFFFFF000000000000000000000000FFFFFFFF000000000000000000000000),
                    shr(32, and(output, 0x00000000FFFFFFFF000000000000000000000000FFFFFFFF0000000000000000))
                )
                output := or(
                    and(output, 0xFFFF000000000000FFFF000000000000FFFF000000000000FFFF000000000000),
                    shr(16, and(output, 0x0000FFFF000000000000FFFF000000000000FFFF000000000000FFFF00000000))
                )
                output := or(
                    and(output, 0xFF000000FF000000FF000000FF000000FF000000FF000000FF000000FF000000),
                    shr(8, and(output, 0x00FF000000FF000000FF000000FF000000FF000000FF000000FF000000FF0000))
                )
                output := or(
                    shr(4, and(output, 0xF000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000)),
                    shr(8, and(output, 0x0F000F000F000F000F000F000F000F000F000F000F000F000F000F000F000F00))
                )
                output := add(
                    add(0x3030303030303030303030303030303030303030303030303030303030303030, output),
                    mul(
                        and(
                            shr(4, add(output, 0x0606060606060606060606060606060606060606060606060606060606060606)),
                            0x0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F0F
                        ),
                        7   // Change 7 to 39 for lower case output
                    )
                )
            }

            result := mload(0x40)
            let length := mload(data)
            let resultLength := shl(1, length)
            let toPtr := add(result, 0x22)          // 32 bytes for length + 2 bytes for '0x'
            mstore(0x40, add(toPtr, resultLength))  // move free memory pointer
            mstore(add(result, 2), 0x3078)          // 0x3078 is right aligned so we write to `result + 2`
                                                    // to store the last 2 bytes in the beginning of the string
            mstore(result, add(resultLength, 2))    // extra 2 bytes for '0x'

            for {
                let fromPtr := add(data, 0x20)
                let endPtr := add(fromPtr, length)
            } lt(fromPtr, endPtr) {
                fromPtr := add(fromPtr, 0x20)
            } {
                let rawData := mload(fromPtr)
                let hexData := _toHex16(rawData)
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
                hexData := _toHex16(shl(128, rawData))
                mstore(toPtr, hexData)
                toPtr := add(toPtr, 0x20)
            }
        }
    }
}


// File @openzeppelin/contracts/token/ERC20/extensions/[email protected]

// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;





library UniERC20 {
    using SafeERC20 for IERC20;

    error InsufficientBalance();
    error ApproveCalledOnETH();
    error NotEnoughValue();
    error FromIsNotSender();
    error ToIsNotThis();
    error ETHTransferFailed();

    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    IERC20 private constant _ETH_ADDRESS = IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    IERC20 private constant _ZERO_ADDRESS = IERC20(address(0));

    function isETH(IERC20 token) internal pure returns (bool) {
        return (token == _ZERO_ADDRESS || token == _ETH_ADDRESS);
    }

    function uniBalanceOf(IERC20 token, address account) internal view returns (uint256) {
        if (isETH(token)) {
            return account.balance;
        } else {
            return token.balanceOf(account);
        }
    }

    /// @dev note that this function does nothing in case of zero amount
    function uniTransfer(IERC20 token, address payable to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (address(this).balance < amount) revert InsufficientBalance();
                // solhint-disable-next-line avoid-low-level-calls
                (bool success, ) = to.call{value: amount, gas: _RAW_CALL_GAS_LIMIT}("");
                if (!success) revert ETHTransferFailed();
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }

    /// @dev note that this function does nothing in case of zero amount
    function uniTransferFrom(IERC20 token, address payable from, address to, uint256 amount) internal {
        if (amount > 0) {
            if (isETH(token)) {
                if (msg.value < amount) revert NotEnoughValue();
                if (from != msg.sender) revert FromIsNotSender();
                if (to != address(this)) revert ToIsNotThis();
                if (msg.value > amount) {
                    // Return remainder if exist
                    unchecked {
                        // solhint-disable-next-line avoid-low-level-calls
                        (bool success, ) = from.call{value: msg.value - amount, gas: _RAW_CALL_GAS_LIMIT}("");
                        if (!success) revert ETHTransferFailed();
                    }
                }
            } else {
                token.safeTransferFrom(from, to, amount);
            }
        }
    }

    function uniSymbol(IERC20 token) internal view returns(string memory) {
        return _uniDecode(token, IERC20Metadata.symbol.selector, IERC20MetadataUppercase.SYMBOL.selector);
    }

    function uniName(IERC20 token) internal view returns(string memory) {
        return _uniDecode(token, IERC20Metadata.name.selector, IERC20MetadataUppercase.NAME.selector);
    }

    function uniApprove(IERC20 token, address to, uint256 amount) internal {
        if (isETH(token)) revert ApproveCalledOnETH();

        token.forceApprove(to, amount);
    }

    /// 20K gas is provided to account for possible implementations of name/symbol
    /// (token implementation might be behind proxy or store the value in storage)
    function _uniDecode(IERC20 token, bytes4 lowerCaseSelector, bytes4 upperCaseSelector) private view returns(string memory result) {
        if (isETH(token)) {
            return "ETH";
        }

        (bool success, bytes memory data) = address(token).staticcall{ gas: 20000 }(
            abi.encodeWithSelector(lowerCaseSelector)
        );
        if (!success) {
            (success, data) = address(token).staticcall{ gas: 20000 }(
                abi.encodeWithSelector(upperCaseSelector)
            );
        }

        if (success && data.length >= 0x40) {
            (uint256 offset, uint256 len) = abi.decode(data, (uint256, uint256));
            if (offset == 0x20 && len > 0 && data.length == 0x40 + len) {
                /// @solidity memory-safe-assembly
                assembly { // solhint-disable-line no-inline-assembly
                    result := add(data, 0x20)
                }
                return result;
            }
        }

        if (success && data.length == 32) {
            uint256 len = 0;
            while (len < data.length && data[len] >= 0x20 && data[len] <= 0x7E) {
                unchecked {
                    len++;
                }
            }

            if (len > 0) {
                /// @solidity memory-safe-assembly
                assembly { // solhint-disable-line no-inline-assembly
                    mstore(data, len)
                }
                return string(data);
            }
        }

        return StringUtil.toHex(address(token));
    }
}


// File contracts/routers/GenericRouter.sol


pragma solidity 0.8.17;





contract GenericRouter is EthReceiver {
    using UniERC20 for IERC20;
    using SafeERC20 for IERC20;

    error ZeroMinReturn();
    error ZeroReturnAmount();

    uint256 private constant _PARTIAL_FILL = 1 << 0;
    uint256 private constant _REQUIRES_EXTRA_ETH = 1 << 1;

    struct SwapDescription {
        IERC20 srcToken;
        IERC20 dstToken;
        address payable srcReceiver;
        address payable dstReceiver;
        uint256 amount;
        uint256 minReturnAmount;
        uint256 flags;
    }

    /// @notice Performs a swap, delegating all calls encoded in `data` to `executor`. See tests for usage examples
    /// @dev router keeps 1 wei of every token on the contract balance for gas optimisations reasons. This affects first swap of every token by leaving 1 wei on the contract.
    /// @param executor Aggregation executor that executes calls described in `data`
    /// @param desc Swap description
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// @param data Encoded calls that `caller` should execute in between of swaps
    /// @return returnAmount Resulting token amount
    /// @return spentAmount Source token amount
    function swap(
        IAggregationExecutor executor,
        SwapDescription calldata desc,
        bytes calldata permit,
        bytes calldata data
    )
        external
        payable
        returns (
            uint256 returnAmount,
            uint256 spentAmount
        )
    {
        if (desc.minReturnAmount == 0) revert ZeroMinReturn();

        IERC20 srcToken = desc.srcToken;
        IERC20 dstToken = desc.dstToken;

        bool srcETH = srcToken.isETH();
        if (desc.flags & _REQUIRES_EXTRA_ETH != 0) {
            if (msg.value <= (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        } else {
            if (msg.value != (srcETH ? desc.amount : 0)) revert RouterErrors.InvalidMsgValue();
        }

        if (!srcETH) {
            if (permit.length > 0) {
                srcToken.safePermit(permit);
            }
            srcToken.safeTransferFrom(msg.sender, desc.srcReceiver, desc.amount);
        }

        _execute(executor, msg.sender, desc.amount, data);

        spentAmount = desc.amount;
        // we leave 1 wei on the router for gas optimisations reasons
        returnAmount = dstToken.uniBalanceOf(address(this));
        if (returnAmount == 0) revert ZeroReturnAmount();
        unchecked { returnAmount--; }

        if (desc.flags & _PARTIAL_FILL != 0) {
            uint256 unspentAmount = srcToken.uniBalanceOf(address(this));
            if (unspentAmount > 1) {
                // we leave 1 wei on the router for gas optimisations reasons
                unchecked { unspentAmount--; }
                spentAmount -= unspentAmount;
                srcToken.uniTransfer(payable(msg.sender), unspentAmount);
            }
            if (returnAmount * desc.amount < desc.minReturnAmount * spentAmount) revert RouterErrors.ReturnAmountIsNotEnough();
        } else {
            if (returnAmount < desc.minReturnAmount) revert RouterErrors.ReturnAmountIsNotEnough();
        }

        address payable dstReceiver = (desc.dstReceiver == address(0)) ? payable(msg.sender) : desc.dstReceiver;
        dstToken.uniTransfer(dstReceiver, returnAmount);
    }

    function _execute(
        IAggregationExecutor executor,
        address srcTokenOwner,
        uint256 inputAmount,
        bytes calldata data
    ) private {
        bytes4 executeSelector = executor.execute.selector;
        /// @solidity memory-safe-assembly
        assembly {  // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, executeSelector)
            mstore(add(ptr, 0x04), srcTokenOwner)
            calldatacopy(add(ptr, 0x24), data.offset, data.length)
            mstore(add(add(ptr, 0x24), data.length), inputAmount)

            if iszero(call(gas(), executor, callvalue(), ptr, add(0x44, data.length), 0, 0)) {
                returndatacopy(ptr, 0, returndatasize())
                revert(ptr, returndatasize())
            }
        }
    }
}


// File contracts/routers/UnoswapRouter.sol


pragma solidity 0.8.17;




contract UnoswapRouter is EthReceiver {
    using SafeERC20 for IERC20;

    error ReservesCallFailed();
    error SwapAmountTooLarge();

    bytes4 private constant _TRANSFER_FROM_CALL_SELECTOR = 0x23b872dd;
    bytes4 private constant _WETH_DEPOSIT_CALL_SELECTOR = 0xd0e30db0;
    bytes4 private constant _WETH_WITHDRAW_CALL_SELECTOR = 0x2e1a7d4d;
    bytes4 private constant _ERC20_TRANSFER_CALL_SELECTOR = 0xa9059cbb;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _REVERSE_MASK =   0x8000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_MASK =      0x4000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _NUMERATOR_MASK = 0x0000000000000000ffffffff0000000000000000000000000000000000000000;
    /// @dev WETH address is network-specific and needs to be changed before deployment.
    /// It can not be moved to immutable as immutables are not supported in assembly
    address private constant _WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
    bytes4 private constant _UNISWAP_PAIR_RESERVES_CALL_SELECTOR = 0x0902f1ac;
    bytes4 private constant _UNISWAP_PAIR_SWAP_CALL_SELECTOR = 0x022c0d9f;
    uint256 private constant _DENOMINATOR = 1e9;
    uint256 private constant _NUMERATOR_OFFSET = 160;
    uint256 private constant _MAX_SWAP_AMOUNT = (1 << 112) - 1;  // type(uint112).max;

    /// @notice Same as `unoswapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swapped funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function unoswapToWithPermit(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        srcToken.safePermit(permit);
        return _unoswap(recipient, srcToken, amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swapped funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function unoswapTo(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _unoswap(recipient, srcToken, amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function unoswap(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _unoswap(payable(msg.sender), srcToken, amount, minReturn, pools);
    }

    function _unoswap(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) private returns(uint256 returnAmount) {
        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function validateERC20Transfer(status) {
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()),                       // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1))  // true in return data
                )
                if iszero(success) {
                    mstore(0, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // ERC20TransferFailed()
                    revert(0, 4)
                }
            }

            function swap(emptyPtr, swapAmount, pair, reversed, numerator, to) -> ret {
                mstore(emptyPtr, _UNISWAP_PAIR_RESERVES_CALL_SELECTOR)
                if iszero(staticcall(gas(), pair, emptyPtr, 0x4, emptyPtr, 0x40)) {
                    reRevert()
                }
                if iszero(eq(returndatasize(), 0x60)) {
                    mstore(0, 0x85cd58dc00000000000000000000000000000000000000000000000000000000)  // ReservesCallFailed()
                    revert(0, 4)
                }

                let reserve0 := mload(emptyPtr)
                let reserve1 := mload(add(emptyPtr, 0x20))
                if reversed {
                    let tmp := reserve0
                    reserve0 := reserve1
                    reserve1 := tmp
                }
                // this will not overflow as reserve0, reserve1 and ret fit to 112 bit and numerator and _DENOMINATOR fit to 32 bit
                ret := mul(swapAmount, numerator)
                ret := div(mul(ret, reserve1), add(ret, mul(reserve0, _DENOMINATOR)))

                mstore(emptyPtr, _UNISWAP_PAIR_SWAP_CALL_SELECTOR)
                reversed := iszero(reversed)
                mstore(add(emptyPtr, 0x04), mul(ret, iszero(reversed)))
                mstore(add(emptyPtr, 0x24), mul(ret, reversed))
                mstore(add(emptyPtr, 0x44), to)
                mstore(add(emptyPtr, 0x64), 0x80)
                mstore(add(emptyPtr, 0x84), 0)
                if iszero(call(gas(), pair, 0, emptyPtr, 0xa4, 0, 0)) {
                    reRevert()
                }
            }

            // make sure that input amount fits in 112 bit
            if gt(amount, _MAX_SWAP_AMOUNT) {
                mstore(0, 0xcf0b4d3a00000000000000000000000000000000000000000000000000000000)  // SwapAmountTooLarge()
                revert(0, 4)
            }

            let emptyPtr := mload(0x40)
            mstore(0x40, add(emptyPtr, 0xc0))

            let poolsEndOffset := add(pools.offset, shl(5, pools.length))
            let rawPair := calldataload(pools.offset)
            switch srcToken
            case 0 {
                if iszero(eq(amount, callvalue())) {
                    mstore(0, 0x1841b4e100000000000000000000000000000000000000000000000000000000)  // InvalidMsgValue()
                    revert(0, 4)
                }

                mstore(emptyPtr, _WETH_DEPOSIT_CALL_SELECTOR)
                if iszero(call(gas(), _WETH, amount, emptyPtr, 0x4, 0, 0)) {
                    reRevert()
                }

                mstore(emptyPtr, _ERC20_TRANSFER_CALL_SELECTOR)
                mstore(add(emptyPtr, 0x4), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x24), amount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x44, 0, 0)) {
                    reRevert()
                }
            }
            default {
                if callvalue() {
                    mstore(0, 0x1841b4e100000000000000000000000000000000000000000000000000000000)  // InvalidMsgValue()
                    revert(0, 4)
                }

                mstore(emptyPtr, _TRANSFER_FROM_CALL_SELECTOR)
                mstore(add(emptyPtr, 0x4), caller())
                mstore(add(emptyPtr, 0x24), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x44), amount)
                validateERC20Transfer(
                    call(gas(), srcToken, 0, emptyPtr, 0x64, 0, 0x20)
                )
            }

            returnAmount := amount

            for {let i := add(pools.offset, 0x20)} lt(i, poolsEndOffset) {i := add(i, 0x20)} {
                let nextRawPair := calldataload(i)

                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    and(nextRawPair, _ADDRESS_MASK)
                )

                rawPair := nextRawPair
            }

            switch and(rawPair, _WETH_MASK)
            case 0 {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    recipient
                )
            }
            default {
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    address()
                )

                mstore(emptyPtr, _WETH_WITHDRAW_CALL_SELECTOR)
                mstore(add(emptyPtr, 0x04), returnAmount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x24, 0, 0)) {
                    reRevert()
                }

                if iszero(call(gas(), recipient, returnAmount, 0, 0, 0, 0)) {
                    reRevert()
                }
            }
        }
        if (returnAmount < minReturn) revert RouterErrors.ReturnAmountIsNotEnough();
    }
}


// File contracts/interfaces/IUniswapV3Pool.sol

pragma solidity 0.8.17;

interface IUniswapV3Pool {
    /// @notice Swap token0 for token1, or token1 for token0
    /// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
    /// @param recipient The address to receive the output of the swap
    /// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
    /// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
    /// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
    /// value after the swap. If one for zero, the price cannot be greater than this value after the swap
    /// @param data Any data to be passed through to the callback
    /// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
    /// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);

    /// @notice The first of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token0() external view returns (address);

    /// @notice The second of the two tokens of the pool, sorted by address
    /// @return The token contract address
    function token1() external view returns (address);

    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}


// File contracts/interfaces/IUniswapV3SwapCallback.sol

pragma solidity 0.8.17;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                /// @solidity memory-safe-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/SafeCast.sol)

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248) {
        require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
        return int248(value);
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240) {
        require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
        return int240(value);
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232) {
        require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
        return int232(value);
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224) {
        require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
        return int224(value);
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216) {
        require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
        return int216(value);
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208) {
        require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
        return int208(value);
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200) {
        require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
        return int200(value);
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192) {
        require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
        return int192(value);
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184) {
        require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
        return int184(value);
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176) {
        require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
        return int176(value);
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168) {
        require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
        return int168(value);
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160) {
        require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
        return int160(value);
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152) {
        require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
        return int152(value);
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144) {
        require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
        return int144(value);
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136) {
        require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
        return int136(value);
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120) {
        require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
        return int120(value);
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112) {
        require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
        return int112(value);
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104) {
        require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
        return int104(value);
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96) {
        require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
        return int96(value);
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88) {
        require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
        return int88(value);
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80) {
        require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
        return int80(value);
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72) {
        require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
        return int72(value);
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56) {
        require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
        return int56(value);
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48) {
        require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
        return int48(value);
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40) {
        require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
        return int40(value);
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24) {
        require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
        return int24(value);
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}


// File contracts/routers/UnoswapV3Router.sol


pragma solidity 0.8.17;









contract UnoswapV3Router is EthReceiver, IUniswapV3SwapCallback {
    using Address for address payable;
    using SafeERC20 for IERC20;

    error EmptyPools();
    error BadPool();

    uint256 private constant _ONE_FOR_ZERO_MASK = 1 << 255;
    uint256 private constant _WETH_UNWRAP_MASK = 1 << 253;
    bytes32 private constant _POOL_INIT_CODE_HASH = 0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54;
    bytes32 private constant _FF_FACTORY = 0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000;
    // concatenation of token0(), token1() fee(), transfer() and transferFrom() selectors
    bytes32 private constant _SELECTORS = 0x0dfe1681d21220a7ddca3f43a9059cbb23b872dd000000000000000000000000;
    uint256 private constant _ADDRESS_MASK =   0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    /// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
    uint160 private constant _MIN_SQRT_RATIO = 4295128739 + 1;
    /// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
    uint160 private constant _MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342 - 1;
    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(IWETH weth) {
        _WETH = weth;
    }

    /// @notice Same as `uniswapV3SwapTo` but calls permit first,
    /// allowing to approve token spending and make a swap in one transaction.
    /// @param recipient Address that will receive swap funds
    /// @param srcToken Source token
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    /// @param permit Should contain valid permit that can be used in `IERC20Permit.permit` calls.
    /// See tests for examples
    function uniswapV3SwapToWithPermit(
        address payable recipient,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit
    ) external returns(uint256 returnAmount) {
        srcToken.safePermit(permit);
        return _uniswapV3Swap(recipient, amount, minReturn, pools);
    }

    /// @notice Same as `uniswapV3SwapTo` but uses `msg.sender` as recipient
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3Swap(
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _uniswapV3Swap(payable(msg.sender), amount, minReturn, pools);
    }

    /// @notice Performs swap using Uniswap V3 exchange. Wraps and unwraps ETH if required.
    /// Sending non-zero `msg.value` for anything but ETH swaps is prohibited
    /// @param recipient Address that will receive swap funds
    /// @param amount Amount of source tokens to swap
    /// @param minReturn Minimal allowed returnAmount to make transaction commit
    /// @param pools Pools chain used for swaps. Pools src and dst tokens should match to make swap happen
    function uniswapV3SwapTo(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns(uint256 returnAmount) {
        return _uniswapV3Swap(recipient, amount, minReturn, pools);
    }

    function _uniswapV3Swap(
        address payable recipient,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) private returns(uint256 returnAmount) {
        unchecked {
            uint256 len = pools.length;
            if (len == 0) revert EmptyPools();
            uint256 lastIndex = len - 1;
            returnAmount = amount;
            bool wrapWeth = msg.value > 0;
            bool unwrapWeth = pools[lastIndex] & _WETH_UNWRAP_MASK > 0;
            if (wrapWeth) {
                if (msg.value != amount) revert RouterErrors.InvalidMsgValue();
                _WETH.deposit{value: amount}();
            }
            if (len > 1) {
                returnAmount = _makeSwap(address(this), wrapWeth ? address(this) : msg.sender, pools[0], returnAmount);

                for (uint256 i = 1; i < lastIndex; i++) {
                    returnAmount = _makeSwap(address(this), address(this), pools[i], returnAmount);
                }
                returnAmount = _makeSwap(unwrapWeth ? address(this) : recipient, address(this), pools[lastIndex], returnAmount);
            } else {
                returnAmount = _makeSwap(unwrapWeth ? address(this) : recipient, wrapWeth ? address(this) : msg.sender, pools[0], returnAmount);
            }

            if (returnAmount < minReturn) revert RouterErrors.ReturnAmountIsNotEnough();

            if (unwrapWeth) {
                _WETH.withdraw(returnAmount);
                recipient.sendValue(returnAmount);
            }
        }
    }

    /// @inheritdoc IUniswapV3SwapCallback
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata /* data */
    ) external override {
        assembly {  // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }

            function validateERC20Transfer(status) {
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()),                       // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1))  // true in return data
                )
                if iszero(success) {
                    mstore(0, 0xf27f64e400000000000000000000000000000000000000000000000000000000)  // ERC20TransferFailed()
                    revert(0, 4)
                }
            }

            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 0x15)  // 0x15 = _FF_FACTORY size

            mstore(emptyPtr, _SELECTORS)
            if iszero(staticcall(gas(), caller(), emptyPtr, 0x4, resultPtr, 0x20)) {
                reRevert()
            }
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x4), 0x4, add(resultPtr, 0x20), 0x20)) {
                reRevert()
            }
            if iszero(staticcall(gas(), caller(), add(emptyPtr, 0x8), 0x4, add(resultPtr, 0x40), 0x20)) {
                reRevert()
            }

            let token
            let amount
            switch sgt(amount0Delta, 0)
            case 1 {
                token := mload(resultPtr)
                amount := amount0Delta
            }
            default {
                token := mload(add(resultPtr, 0x20))
                amount := amount1Delta
            }

            mstore(emptyPtr, _FF_FACTORY)
            mstore(resultPtr, keccak256(resultPtr, 0x60)) // Compute the inner hash in-place
            mstore(add(resultPtr, 0x20), _POOL_INIT_CODE_HASH)
            let pool := and(keccak256(emptyPtr, 0x55), _ADDRESS_MASK)
            if xor(pool, caller()) {
                mstore(0, 0xb2c0272200000000000000000000000000000000000000000000000000000000)  // BadPool()
                revert(0, 4)
            }

            let payer := calldataload(0x84)
            mstore(emptyPtr, _SELECTORS)
            switch eq(payer, address())
            case 1 {
                // token.safeTransfer(msg.sender,amount)
                mstore(add(emptyPtr, 0x10), caller())
                mstore(add(emptyPtr, 0x30), amount)
                validateERC20Transfer(
                    call(gas(), token, 0, add(emptyPtr, 0x0c), 0x44, 0, 0x20)
                )
            }
            default {
                // token.safeTransferFrom(payer, msg.sender, amount);
                mstore(add(emptyPtr, 0x14), payer)
                mstore(add(emptyPtr, 0x34), caller())
                mstore(add(emptyPtr, 0x54), amount)
                validateERC20Transfer(
                    call(gas(), token, 0, add(emptyPtr, 0x10), 0x64, 0, 0x20)
                )
            }
        }
    }

    function _makeSwap(address recipient, address payer, uint256 pool, uint256 amount) private returns (uint256) {
        bool zeroForOne = pool & _ONE_FOR_ZERO_MASK == 0;
        if (zeroForOne) {
            (, int256 amount1) = IUniswapV3Pool(address(uint160(pool))).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MIN_SQRT_RATIO,
                abi.encode(payer)
            );
            return SafeCast.toUint256(-amount1);
        } else {
            (int256 amount0,) = IUniswapV3Pool(address(uint160(pool))).swap(
                recipient,
                zeroForOne,
                SafeCast.toInt256(amount),
                _MAX_SQRT_RATIO,
                abi.encode(payer)
            );
            return SafeCast.toUint256(-amount0);
        }
    }
}


// File @1inch/solidity-utils/contracts/[email protected]


pragma solidity ^0.8.0;

abstract contract OnlyWethReceiver is EthReceiver {
    address private immutable _WETH;  // solhint-disable-line var-name-mixedcase

    constructor(address weth) {
        _WETH = address(weth);
    }

    function _receive() internal virtual override {
        if (msg.sender != _WETH) revert EthDepositRejected();
    }
}


// File @openzeppelin/contracts/interfaces/[email protected]

// OpenZeppelin Contracts v4.4.1 (interfaces/IERC1271.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 *
 * _Available since v4.1._
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash      Hash of the data to be signed
     * @param signature Signature byte array associated with _data
     */
    function isValidSignature(bytes32 hash, bytes memory signature) external view returns (bytes4 magicValue);
}


// File @1inch/solidity-utils/contracts/libraries/[email protected]


pragma solidity ^0.8.0;

library ECDSA {
    // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
    // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
    // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
    // signatures from current libraries generate a unique signature with an s-value in the lower half order.
    //
    // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
    // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
    // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
    // these malleable signatures as well.
    uint256 private constant _S_BOUNDARY = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0 + 1;
    uint256 private constant _COMPACT_S_MASK = 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
    uint256 private constant _COMPACT_V_SHIFT = 255;

    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal view returns(address signer) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)

                mstore(ptr, hash)
                mstore(add(ptr, 0x20), v)
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }

    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal view returns(address signer) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let s := and(vs, _COMPACT_S_MASK)
            if lt(s, _S_BOUNDARY) {
                let ptr := mload(0x40)

                mstore(ptr, hash)
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                mstore(add(ptr, 0x40), r)
                mstore(add(ptr, 0x60), s)
                mstore(0, 0)
                pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                signer := mload(0)
            }
        }
    }

    /// WARNING!!!
    /// There is a known signature malleability issue with two representations of signatures!
    /// Even though this function is able to verify both standard 65-byte and compact 64-byte EIP-2098 signatures
    /// one should never use raw signatures for any kind of invalidation logic in their code.
    /// As the standard and compact representations are interchangeable any invalidation logic that relies on
    /// signature uniqueness will get rekt.
    /// More info: https://github.com/OpenZeppelin/openzeppelin-contracts/security/advisories/GHSA-4h98-2769-gh6h
    function recover(bytes32 hash, bytes calldata signature) internal view returns(address signer) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            // memory[ptr:ptr+0x80] = (hash, v, r, s)
            switch signature.length
            case 65 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                mstore(add(ptr, 0x20), byte(0, calldataload(add(signature.offset, 0x40))))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x40)
            }
            case 64 {
                // memory[ptr+0x20:ptr+0x80] = (v, r, s)
                let vs := calldataload(add(signature.offset, 0x20))
                mstore(add(ptr, 0x20), add(27, shr(_COMPACT_V_SHIFT, vs)))
                calldatacopy(add(ptr, 0x40), signature.offset, 0x20)
                mstore(add(ptr, 0x60), and(vs, _COMPACT_S_MASK))
            }
            default {
                ptr := 0
            }

            if ptr {
                if lt(mload(add(ptr, 0x60)), _S_BOUNDARY) {
                    // memory[ptr:ptr+0x20] = (hash)
                    mstore(ptr, hash)

                    mstore(0, 0)
                    pop(staticcall(gas(), 0x1, ptr, 0x80, 0, 0x20))
                    signer := mload(0)
                }
            }
        }
    }

    function recoverOrIsValidSignature(address signer, bytes32 hash, bytes calldata signature) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if ((signature.length == 64 || signature.length == 65) && recover(hash, signature) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, signature);
    }

    function recoverOrIsValidSignature(address signer, bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, v, r, s) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, v, r, s);
    }

    function recoverOrIsValidSignature(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature(signer, hash, r, vs);
    }

    function recoverOrIsValidSignature65(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        if (signer == address(0)) return false;
        if (recover(hash, r, vs) == signer) {
            return true;
        }
        return isValidSignature65(signer, hash, r, vs);
    }

    function isValidSignature(address signer, bytes32 hash, bytes calldata signature) internal view returns(bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, signature));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), signature.length)
            calldatacopy(add(ptr, 0x64), signature.offset, signature.length)
            if staticcall(gas(), signer, ptr, add(0x64, signature.length), 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function isValidSignature(address signer, bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal view returns(bool success) {
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), s)
            mstore8(add(ptr, 0xa4), v)
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function isValidSignature(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs)));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 64)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), vs)
            if staticcall(gas(), signer, ptr, 0xa4, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function isValidSignature65(address signer, bytes32 hash, bytes32 r, bytes32 vs) internal view returns(bool success) {
        // (bool success, bytes memory data) = signer.staticcall(abi.encodeWithSelector(IERC1271.isValidSignature.selector, hash, abi.encodePacked(r, vs & ~uint256(1 << 255), uint8(vs >> 255))));
        // return success && data.length >= 4 && abi.decode(data, (bytes4)) == IERC1271.isValidSignature.selector;
        bytes4 selector = IERC1271.isValidSignature.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            mstore(ptr, selector)
            mstore(add(ptr, 0x04), hash)
            mstore(add(ptr, 0x24), 0x40)
            mstore(add(ptr, 0x44), 65)
            mstore(add(ptr, 0x64), r)
            mstore(add(ptr, 0x84), and(vs, _COMPACT_S_MASK))
            mstore8(add(ptr, 0xa4), add(27, shr(_COMPACT_V_SHIFT, vs)))
            if staticcall(gas(), signer, ptr, 0xa5, 0, 0x20) {
                success := and(eq(selector, mload(0)), eq(returndatasize(), 0x20))
            }
        }
    }

    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 res) {
        // 32 is the length in bytes of hash, enforced by the type signature above
        // return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            mstore(0, 0x19457468657265756d205369676e6564204d6573736167653a0a333200000000) // "\x19Ethereum Signed Message:\n32"
            mstore(28, hash)
            res := keccak256(0, 60)
        }
    }

    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 res) {
        // return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            mstore(ptr, 0x1901000000000000000000000000000000000000000000000000000000000000) // "\x19\x01"
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            res := keccak256(ptr, 66)
        }
    }
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;

library OrderRFQLib {
    struct OrderRFQ {
        uint256 info;  // lowest 64 bits is the order id, next 64 bits is the expiration timestamp
        address makerAsset;
        address takerAsset;
        address maker;
        address allowedSender;  // equals to Zero address on public orders
        uint256 makingAmount;
        uint256 takingAmount;
    }

    bytes32 constant internal _LIMIT_ORDER_RFQ_TYPEHASH = keccak256(
        "OrderRFQ("
            "uint256 info,"
            "address makerAsset,"
            "address takerAsset,"
            "address maker,"
            "address allowedSender,"
            "uint256 makingAmount,"
            "uint256 takingAmount"
        ")"
    );

    function hash(OrderRFQ memory order, bytes32 domainSeparator) internal pure returns(bytes32 result) {
        bytes32 typehash = _LIMIT_ORDER_RFQ_TYPEHASH;
        bytes32 orderHash;
        // this assembly is memory unsafe :(
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := sub(order, 0x20)

            // keccak256(abi.encode(_LIMIT_ORDER_RFQ_TYPEHASH, order));
            let tmp := mload(ptr)
            mstore(ptr, typehash)
            orderHash := keccak256(ptr, 0x100)
            mstore(ptr, tmp)
        }
        return ECDSA.toTypedDataHash(domainSeparator, orderHash);
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        while (value != 0) {
            digits -= 1;
            buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
            value /= 10;
        }
        return string(buffer);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        if (value == 0) {
            return "0x00";
        }
        uint256 temp = value;
        uint256 length = 0;
        while (temp != 0) {
            length++;
            temp >>= 8;
        }
        return toHexString(value, length);
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _HEX_SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }
}


// File @openzeppelin/contracts/utils/cryptography/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)

pragma solidity ^0.8.0;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
 *
 * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
 * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
 * they need in their contracts using a combination of `abi.encode` and `keccak256`.
 *
 * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
 * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
 * ({_hashTypedDataV4}).
 *
 * The implementation of the domain separator was designed to be as efficient as possible while still properly updating
 * the chain id to protect against replay attacks on an eventual fork of the chain.
 *
 * NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
 * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
 *
 * _Available since v3.4._
 */
abstract contract EIP712 {
    /* solhint-disable var-name-mixedcase */
    // Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
    // invalidate the cached domain separator if the chain id changes.
    bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
    uint256 private immutable _CACHED_CHAIN_ID;
    address private immutable _CACHED_THIS;

    bytes32 private immutable _HASHED_NAME;
    bytes32 private immutable _HASHED_VERSION;
    bytes32 private immutable _TYPE_HASH;

    /* solhint-enable var-name-mixedcase */

    /**
     * @dev Initializes the domain separator and parameter caches.
     *
     * The meaning of `name` and `version` is specified in
     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
     *
     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
     * - `version`: the current major version of the signing domain.
     *
     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
     * contract upgrade].
     */
    constructor(string memory name, string memory version) {
        bytes32 hashedName = keccak256(bytes(name));
        bytes32 hashedVersion = keccak256(bytes(version));
        bytes32 typeHash = keccak256(
            "EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
        );
        _HASHED_NAME = hashedName;
        _HASHED_VERSION = hashedVersion;
        _CACHED_CHAIN_ID = block.chainid;
        _CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
        _CACHED_THIS = address(this);
        _TYPE_HASH = typeHash;
    }

    /**
     * @dev Returns the domain separator for the current chain.
     */
    function _domainSeparatorV4() internal view returns (bytes32) {
        if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
            return _CACHED_DOMAIN_SEPARATOR;
        } else {
            return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
        }
    }

    function _buildDomainSeparator(
        bytes32 typeHash,
        bytes32 nameHash,
        bytes32 versionHash
    ) private view returns (bytes32) {
        return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
    }

    /**
     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
     * function returns the hash of the fully encoded EIP712 message for this domain.
     *
     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
     *
     * ```solidity
     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
     *     keccak256("Mail(address to,string contents)"),
     *     mailTo,
     *     keccak256(bytes(mailContents))
     * )));
     * address signer = ECDSA.recover(digest, signature);
     * ```
     */
    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
        return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
    }
}


// File @1inch/limit-order-protocol/contracts/libraries/[email protected]


pragma solidity 0.8.17;

library Errors {
    error InvalidMsgValue();
    error ETHTransferFailed();
}


// File @1inch/limit-order-protocol/contracts/helpers/[email protected]


pragma solidity 0.8.17;

/// @title A helper contract for calculations related to order amounts
library AmountCalculator {
    /// @notice Calculates maker amount
    /// @return Result Floored maker amount
    function getMakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapTakerAmount) internal pure returns(uint256) {
        return swapTakerAmount * orderMakerAmount / orderTakerAmount;
    }

    /// @notice Calculates taker amount
    /// @return Result Ceiled taker amount
    function getTakingAmount(uint256 orderMakerAmount, uint256 orderTakerAmount, uint256 swapMakerAmount) internal pure returns(uint256) {
        return (swapMakerAmount * orderTakerAmount + orderMakerAmount - 1) / orderMakerAmount;
    }
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;







/// @title RFQ Limit Order mixin
abstract contract OrderRFQMixin is EIP712, OnlyWethReceiver {
    using SafeERC20 for IERC20;
    using OrderRFQLib for OrderRFQLib.OrderRFQ;

    error RFQZeroTargetIsForbidden();
    error RFQPrivateOrder();
    error RFQBadSignature();
    error OrderExpired();
    error MakingAmountExceeded();
    error TakingAmountExceeded();
    error RFQSwapWithZeroAmount();
    error InvalidatedOrder();

    /**
     * @notice Emitted when RFQ gets filled
     * @param orderHash Hash of the order
     * @param makingAmount Amount of the maker asset that was transferred from maker to taker
     */
    event OrderFilledRFQ(
        bytes32 orderHash,
        uint256 makingAmount
    );

    uint256 private constant _RAW_CALL_GAS_LIMIT = 5000;
    uint256 private constant _MAKER_AMOUNT_FLAG = 1 << 255;
    uint256 private constant _SIGNER_SMART_CONTRACT_HINT = 1 << 254;
    uint256 private constant _IS_VALID_SIGNATURE_65_BYTES = 1 << 253;
    uint256 private constant _UNWRAP_WETH_FLAG = 1 << 252;
    uint256 private constant _AMOUNT_MASK = ~(
        _MAKER_AMOUNT_FLAG |
        _SIGNER_SMART_CONTRACT_HINT |
        _IS_VALID_SIGNATURE_65_BYTES |
        _UNWRAP_WETH_FLAG
    );

    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    mapping(address => mapping(uint256 => uint256)) private _invalidator;

    constructor(IWETH weth) OnlyWethReceiver(address(weth)) {
        _WETH = weth;
    }

    /**
     * @notice Returns bitmask for double-spend invalidators based on lowest byte of order.info and filled quotes
     * @param maker Maker address
     * @param slot Slot number to return bitmask for
     * @return result Each bit represents whether corresponding was already invalidated
     */
    function invalidatorForOrderRFQ(address maker, uint256 slot) external view returns(uint256 /* result */) {
        return _invalidator[maker][slot];
    }

    /**
     * @notice Cancels order's quote
     * @param orderInfo Order info (only order id in lowest 64 bits is used)
     */
    function cancelOrderRFQ(uint256 orderInfo) external {
        _invalidateOrder(msg.sender, orderInfo, 0);
    }

    /// @notice Cancels multiple order's quotes
    function cancelOrderRFQ(uint256 orderInfo, uint256 additionalMask) external {
        _invalidateOrder(msg.sender, orderInfo, additionalMask);
    }

    /**
     * @notice Fills order's quote, fully or partially (whichever is possible)
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderRFQ(
        OrderRFQLib.OrderRFQ memory order,
        bytes calldata signature,
        uint256 flagsAndAmount
    ) external payable returns(uint256 /* filledMakingAmount */, uint256 /* filledTakingAmount */, bytes32 /* orderHash */) {
        return fillOrderRFQTo(order, signature, flagsAndAmount, msg.sender);
    }

    /**
     * @notice Fills order's quote, fully or partially, with compact signature
     * @param order Order quote to fill
     * @param r R component of signature
     * @param vs VS component of signature
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * - Bits 0-252 contain the amount to fill
     * - Bit 253 is used to indicate whether signature is 64-bit (0) or 65-bit (1)
     * - Bit 254 is used to indicate whether smart contract (1) signed the order or not (0)
     * - Bit 255 is used to indicate whether maker (1) or taker amount (0) is given in the amount parameter
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderRFQCompact(
        OrderRFQLib.OrderRFQ memory order,
        bytes32 r,
        bytes32 vs,
        uint256 flagsAndAmount
    ) external payable returns(uint256 filledMakingAmount, uint256 filledTakingAmount, bytes32 orderHash) {
        orderHash = order.hash(_domainSeparatorV4());
        if (flagsAndAmount & _SIGNER_SMART_CONTRACT_HINT != 0) {
            if (flagsAndAmount & _IS_VALID_SIGNATURE_65_BYTES != 0) {
                if (!ECDSA.isValidSignature65(order.maker, orderHash, r, vs)) revert RFQBadSignature();
            } else {
                if (!ECDSA.isValidSignature(order.maker, orderHash, r, vs)) revert RFQBadSignature();
            }
        } else {
            if(!ECDSA.recoverOrIsValidSignature(order.maker, orderHash, r, vs)) revert RFQBadSignature();
        }

        (filledMakingAmount, filledTakingAmount) = _fillOrderRFQTo(order, flagsAndAmount, msg.sender);
        emit OrderFilledRFQ(orderHash, filledMakingAmount);
    }

    /**
     * @notice Same as `fillOrderRFQTo` but calls permit first.
     * It allows to approve token spending and make a swap in one transaction.
     * Also allows to specify funds destination instead of `msg.sender`
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * @param target Address that will receive swap funds
     * @param permit Should consist of abiencoded token address and encoded `IERC20Permit.permit` call.
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     * @dev See tests for examples
     */
    function fillOrderRFQToWithPermit(
        OrderRFQLib.OrderRFQ memory order,
        bytes calldata signature,
        uint256 flagsAndAmount,
        address target,
        bytes calldata permit
    ) external returns(uint256 /* filledMakingAmount */, uint256 /* filledTakingAmount */, bytes32 /* orderHash */) {
        IERC20(order.takerAsset).safePermit(permit);
        return fillOrderRFQTo(order, signature, flagsAndAmount, target);
    }

    /**
     * @notice Same as `fillOrderRFQ` but allows to specify funds destination instead of `msg.sender`
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param flagsAndAmount Fill configuration flags with amount packed in one slot
     * @param target Address that will receive swap funds
     * @return filledMakingAmount Actual amount transferred from maker to taker
     * @return filledTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderRFQTo(
        OrderRFQLib.OrderRFQ memory order,
        bytes calldata signature,
        uint256 flagsAndAmount,
        address target
    ) public payable returns(uint256 filledMakingAmount, uint256 filledTakingAmount, bytes32 orderHash) {
        orderHash = order.hash(_domainSeparatorV4());
        if (flagsAndAmount & _SIGNER_SMART_CONTRACT_HINT != 0) {
            if (flagsAndAmount & _IS_VALID_SIGNATURE_65_BYTES != 0 && signature.length != 65) revert RFQBadSignature();
            if (!ECDSA.isValidSignature(order.maker, orderHash, signature)) revert RFQBadSignature();
        } else {
            if(!ECDSA.recoverOrIsValidSignature(order.maker, orderHash, signature)) revert RFQBadSignature();
        }
        (filledMakingAmount, filledTakingAmount) = _fillOrderRFQTo(order, flagsAndAmount, target);
        emit OrderFilledRFQ(orderHash, filledMakingAmount);
    }

    function _fillOrderRFQTo(
        OrderRFQLib.OrderRFQ memory order,
        uint256 flagsAndAmount,
        address target
    ) private returns(uint256 makingAmount, uint256 takingAmount) {
        if (target == address(0)) revert RFQZeroTargetIsForbidden();

        address maker = order.maker;

        // Validate order
        if (order.allowedSender != address(0) && order.allowedSender != msg.sender) revert RFQPrivateOrder();

        {  // Stack too deep
            uint256 info = order.info;
            // Check time expiration
            uint256 expiration = uint128(info) >> 64;
            if (expiration != 0 && block.timestamp > expiration) revert OrderExpired(); // solhint-disable-line not-rely-on-time
            _invalidateOrder(maker, info, 0);
        }

        {  // Stack too deep
            uint256 orderMakingAmount = order.makingAmount;
            uint256 orderTakingAmount = order.takingAmount;
            uint256 amount = flagsAndAmount & _AMOUNT_MASK;
            // Compute partial fill if needed
            if (amount == 0) {
                // zero amount means whole order
                makingAmount = orderMakingAmount;
                takingAmount = orderTakingAmount;
            }
            else if (flagsAndAmount & _MAKER_AMOUNT_FLAG != 0) {
                if (amount > orderMakingAmount) revert MakingAmountExceeded();
                makingAmount = amount;
                takingAmount = AmountCalculator.getTakingAmount(orderMakingAmount, orderTakingAmount, makingAmount);
            }
            else {
                if (amount > orderTakingAmount) revert TakingAmountExceeded();
                takingAmount = amount;
                makingAmount = AmountCalculator.getMakingAmount(orderMakingAmount, orderTakingAmount, takingAmount);
            }
        }

        if (makingAmount == 0 || takingAmount == 0) revert RFQSwapWithZeroAmount();

        // Maker => Taker
        if (order.makerAsset == address(_WETH) && flagsAndAmount & _UNWRAP_WETH_FLAG != 0) {
            _WETH.transferFrom(maker, address(this), makingAmount);
            _WETH.withdraw(makingAmount);
            // solhint-disable-next-line avoid-low-level-calls
            (bool success, ) = target.call{value: makingAmount, gas: _RAW_CALL_GAS_LIMIT}("");
            if (!success) revert Errors.ETHTransferFailed();
        } else {
            IERC20(order.makerAsset).safeTransferFrom(maker, target, makingAmount);
        }

        // Taker => Maker
        if (order.takerAsset == address(_WETH) && msg.value > 0) {
            if (msg.value != takingAmount) revert Errors.InvalidMsgValue();
            _WETH.deposit{ value: takingAmount }();
            _WETH.transfer(maker, takingAmount);
        } else {
            if (msg.value != 0) revert Errors.InvalidMsgValue();
            IERC20(order.takerAsset).safeTransferFrom(msg.sender, maker, takingAmount);
        }
    }

    function _invalidateOrder(address maker, uint256 orderInfo, uint256 additionalMask) private {
        uint256 invalidatorSlot = uint64(orderInfo) >> 8;
        uint256 invalidatorBits = (1 << uint8(orderInfo)) | additionalMask;
        mapping(uint256 => uint256) storage invalidatorStorage = _invalidator[maker];
        uint256 invalidator = invalidatorStorage[invalidatorSlot];
        if (invalidator & invalidatorBits == invalidatorBits) revert InvalidatedOrder();
        invalidatorStorage[invalidatorSlot] = invalidator | invalidatorBits;
    }
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;

library OrderLib {
    struct Order {
        uint256 salt;
        address makerAsset;
        address takerAsset;
        address maker;
        address receiver;
        address allowedSender;  // equals to Zero address on public orders
        uint256 makingAmount;
        uint256 takingAmount;
        uint256 offsets;
        // bytes makerAssetData;
        // bytes takerAssetData;
        // bytes getMakingAmount; // this.staticcall(abi.encodePacked(bytes, swapTakerAmount)) => (swapMakerAmount)
        // bytes getTakingAmount; // this.staticcall(abi.encodePacked(bytes, swapMakerAmount)) => (swapTakerAmount)
        // bytes predicate;       // this.staticcall(bytes) => (bool)
        // bytes permit;          // On first fill: permit.1.call(abi.encodePacked(permit.selector, permit.2))
        // bytes preInteraction;
        // bytes postInteraction;
        bytes interactions; // concat(makerAssetData, takerAssetData, getMakingAmount, getTakingAmount, predicate, permit, preIntercation, postInteraction)
    }

    bytes32 constant internal _LIMIT_ORDER_TYPEHASH = keccak256(
        "Order("
            "uint256 salt,"
            "address makerAsset,"
            "address takerAsset,"
            "address maker,"
            "address receiver,"
            "address allowedSender,"
            "uint256 makingAmount,"
            "uint256 takingAmount,"
            "uint256 offsets,"
            "bytes interactions"
        ")"
    );

    enum DynamicField {
        MakerAssetData,
        TakerAssetData,
        GetMakingAmount,
        GetTakingAmount,
        Predicate,
        Permit,
        PreInteraction,
        PostInteraction
    }

    function getterIsFrozen(bytes calldata getter) internal pure returns(bool) {
        return getter.length == 1 && getter[0] == "x";
    }

    function _get(Order calldata order, DynamicField field) private pure returns(bytes calldata) {
        uint256 bitShift = uint256(field) << 5; // field * 32
        return order.interactions[
            uint32((order.offsets << 32) >> bitShift):
            uint32(order.offsets >> bitShift)
        ];
    }

    function makerAssetData(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.MakerAssetData);
    }

    function takerAssetData(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.TakerAssetData);
    }

    function getMakingAmount(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.GetMakingAmount);
    }

    function getTakingAmount(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.GetTakingAmount);
    }

    function predicate(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.Predicate);
    }

    function permit(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.Permit);
    }

    function preInteraction(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.PreInteraction);
    }

    function postInteraction(Order calldata order) internal pure returns(bytes calldata) {
        return _get(order, DynamicField.PostInteraction);
    }

    function hash(Order calldata order, bytes32 domainSeparator) internal pure returns(bytes32 result) {
        bytes calldata interactions = order.interactions;
        bytes32 typehash = _LIMIT_ORDER_TYPEHASH;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)

            // keccak256(abi.encode(_LIMIT_ORDER_TYPEHASH, orderWithoutInteractions, keccak256(order.interactions)));
            calldatacopy(ptr, interactions.offset, interactions.length)
            mstore(add(ptr, 0x140), keccak256(ptr, interactions.length))
            calldatacopy(add(ptr, 0x20), order, 0x120)
            mstore(ptr, typehash)
            result := keccak256(ptr, 0x160)
        }
        result = ECDSA.toTypedDataHash(domainSeparator, result);
    }
}


// File @1inch/limit-order-protocol/contracts/libraries/[email protected]


pragma solidity 0.8.17;

/// @title Library with gas efficient alternatives to `abi.decode`
library ArgumentsDecoder {
    error IncorrectDataLength();

    function decodeUint256(bytes calldata data, uint256 offset) internal pure returns(uint256 value) {
        unchecked { if (data.length < offset + 32) revert IncorrectDataLength(); }
        // no memory ops inside so this insertion is automatically memory safe
        assembly { // solhint-disable-line no-inline-assembly
            value := calldataload(add(data.offset, offset))
        }
    }

    function decodeSelector(bytes calldata data) internal pure returns(bytes4 value) {
        if (data.length < 4) revert IncorrectDataLength();
        // no memory ops inside so this insertion is automatically memory safe
        assembly { // solhint-disable-line no-inline-assembly
            value := calldataload(data.offset)
        }
    }

    function decodeTailCalldata(bytes calldata data, uint256 tailOffset) internal pure returns(bytes calldata args) {
        if (data.length < tailOffset) revert IncorrectDataLength();
        // no memory ops inside so this insertion is automatically memory safe
        assembly {  // solhint-disable-line no-inline-assembly
            args.offset := add(data.offset, tailOffset)
            args.length := sub(data.length, tailOffset)
        }
    }

    function decodeTargetAndCalldata(bytes calldata data) internal pure returns(address target, bytes calldata args) {
        if (data.length < 20) revert IncorrectDataLength();
        // no memory ops inside so this insertion is automatically memory safe
        assembly {  // solhint-disable-line no-inline-assembly
            target := shr(96, calldataload(data.offset))
            args.offset := add(data.offset, 20)
            args.length := sub(data.length, 20)
        }
    }
}


// File @1inch/limit-order-protocol/contracts/helpers/[email protected]


pragma solidity 0.8.17;

/// @title A helper contract for managing nonce of tx sender
contract NonceManager {
    error AdvanceNonceFailed();
    event NonceIncreased(address indexed maker, uint256 newNonce);

    mapping(address => uint256) public nonce;

    /// @notice Advances nonce by one
    function increaseNonce() external {
        advanceNonce(1);
    }

    /// @notice Advances nonce by specified amount
    function advanceNonce(uint8 amount) public {
        if (amount == 0) revert AdvanceNonceFailed();
        uint256 newNonce = nonce[msg.sender] + amount;
        nonce[msg.sender] = newNonce;
        emit NonceIncreased(msg.sender, newNonce);
    }

    /// @notice Checks if `makerAddress` has specified `makerNonce`
    /// @return Result True if `makerAddress` has specified nonce. Otherwise, false
    function nonceEquals(address makerAddress, uint256 makerNonce) public view returns(bool) {
        return nonce[makerAddress] == makerNonce;
    }
}


// File @1inch/limit-order-protocol/contracts/helpers/[email protected]


pragma solidity 0.8.17;


/// @title A helper contract for executing boolean functions on arbitrary target call results
contract PredicateHelper is NonceManager {
    using ArgumentsDecoder for bytes;

    error ArbitraryStaticCallFailed();

    /// @notice Calls every target with corresponding data
    /// @return Result True if call to any target returned True. Otherwise, false
    function or(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 current;
        uint256 previous;
        for (uint256 i = 0; (current = uint32(offsets >> i)) != 0; i += 32) {
            (bool success, uint256 res) = _selfStaticCall(data[previous:current]);
            if (success && res == 1) {
                return true;
            }
            previous = current;
        }
        return false;
    }

    /// @notice Calls every target with corresponding data
    /// @return Result True if calls to all targets returned True. Otherwise, false
    function and(uint256 offsets, bytes calldata data) public view returns(bool) {
        uint256 current;
        uint256 previous;
        for (uint256 i = 0; (current = uint32(offsets >> i)) != 0; i += 32) {
            (bool success, uint256 res) = _selfStaticCall(data[previous:current]);
            if (!success || res != 1) {
                return false;
            }
            previous = current;
        }
        return true;
    }

    /// @notice Calls target with specified data and tests if it's equal to the value
    /// @param value Value to test
    /// @return Result True if call to target returns the same value as `value`. Otherwise, false
    function eq(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(data);
        return success && res == value;
    }

    /// @notice Calls target with specified data and tests if it's lower than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is lower than `value`. Otherwise, false
    function lt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(data);
        return success && res < value;
    }

    /// @notice Calls target with specified data and tests if it's bigger than value
    /// @param value Value to test
    /// @return Result True if call to target returns value which is bigger than `value`. Otherwise, false
    function gt(uint256 value, bytes calldata data) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(data);
        return success && res > value;
    }

    /// @notice Checks passed time against block timestamp
    /// @return Result True if current block timestamp is lower than `time`. Otherwise, false
    function timestampBelow(uint256 time) public view returns(bool) {
        return block.timestamp < time;  // solhint-disable-line not-rely-on-time
    }

    /// @notice Performs an arbitrary call to target with data
    /// @return Result Bytes transmuted to uint256
    function arbitraryStaticCall(address target, bytes calldata data) public view returns(uint256) {
        (bool success, uint256 res) = _staticcallForUint(target, data);
        if (!success) revert ArbitraryStaticCallFailed();
        return res;
    }

    function timestampBelowAndNonceEquals(uint256 timeNonceAccount) public view returns(bool) {
        uint256 _time = uint48(timeNonceAccount >> 208);
        uint256 _nonce = uint48(timeNonceAccount >> 160);
        address _account = address(uint160(timeNonceAccount));
        return timestampBelow(_time) && nonceEquals(_account, _nonce);
    }

    function _selfStaticCall(bytes calldata data) internal view returns(bool, uint256) {
        uint256 selector = uint32(data.decodeSelector());
        uint256 arg = data.decodeUint256(4);

        // special case for the most often used predicate
        if (selector == uint32(this.timestampBelowAndNonceEquals.selector)) {  // 0x2cc2878d
            return (true, timestampBelowAndNonceEquals(arg) ? 1 : 0);
        }

        if (selector < uint32(this.arbitraryStaticCall.selector)) {  // 0xbf15fcd8
            if (selector < uint32(this.eq.selector)) {  // 0x6fe7b0ba
                if (selector == uint32(this.gt.selector)) {  // 0x4f38e2b8
                    return (true, gt(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                } else if (selector == uint32(this.timestampBelow.selector)) {  // 0x63592c2b
                    return (true, timestampBelow(arg) ? 1 : 0);
                }
            } else {
                if (selector == uint32(this.eq.selector)) {  // 0x6fe7b0ba
                    return (true, eq(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                } else if (selector == uint32(this.or.selector)) {  // 0x74261145
                    return (true, or(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                }
            }
        } else {
            if (selector < uint32(this.lt.selector)) {  // 0xca4ece22
                if (selector == uint32(this.arbitraryStaticCall.selector)) {  // 0xbf15fcd8
                    return (true, arbitraryStaticCall(address(uint160(arg)), data.decodeTailCalldata(100)));
                } else if (selector == uint32(this.and.selector)) {  // 0xbfa75143
                    return (true, and(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                }
            } else {
                if (selector == uint32(this.lt.selector)) {  // 0xca4ece22
                    return (true, lt(arg, data.decodeTailCalldata(100)) ? 1 : 0);
                } else if (selector == uint32(this.nonceEquals.selector)) {  // 0xcf6fc6e3
                    return (true, nonceEquals(address(uint160(arg)), data.decodeUint256(0x24)) ? 1 : 0);
                }
            }
        }

        return _staticcallForUint(address(this), data);
    }

    function _staticcallForUint(address target, bytes calldata input) private view returns(bool success, uint256 res) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            calldatacopy(data, input.offset, input.length)
            success := staticcall(gas(), target, data, input.length, 0x0, 0x20)
            success := and(success, eq(returndatasize(), 32))
            if success {
                res := mload(0)
            }
        }
    }
}


// File @1inch/limit-order-protocol/contracts/interfaces/[email protected]


pragma solidity 0.8.17;

interface IOrderMixin {
    /**
     * @notice Returns unfilled amount for order. Throws if order does not exist
     * @param orderHash Order's hash. Can be obtained by the `hashOrder` function
     * @return amount Unfilled amount
     */
    function remaining(bytes32 orderHash) external view returns(uint256 amount);

    /**
     * @notice Returns unfilled amount for order
     * @param orderHash Order's hash. Can be obtained by the `hashOrder` function
     * @return rawAmount Unfilled amount of order plus one if order exists. Otherwise 0
     */
    function remainingRaw(bytes32 orderHash) external view returns(uint256 rawAmount);

    /**
     * @notice Same as `remainingRaw` but for multiple orders
     * @param orderHashes Array of hashes
     * @return rawAmounts Array of amounts for each order plus one if order exists or 0 otherwise
     */
    function remainingsRaw(bytes32[] memory orderHashes) external view returns(uint256[] memory rawAmounts);

    /**
     * @notice Checks order predicate
     * @param order Order to check predicate for
     * @return result Predicate evaluation result. True if predicate allows to fill the order, false otherwise
     */
    function checkPredicate(OrderLib.Order calldata order) external view returns(bool result);

    /**
     * @notice Returns order hash according to EIP712 standard
     * @param order Order to get hash for
     * @return orderHash Hash of the order
     */
    function hashOrder(OrderLib.Order calldata order) external view returns(bytes32);

    /**
     * @notice Delegates execution to custom implementation. Could be used to validate if `transferFrom` works properly
     * @dev The function always reverts and returns the simulation results in revert data.
     * @param target Addresses that will be delegated
     * @param data Data that will be passed to delegatee
     */
    function simulate(address target, bytes calldata data) external;

    /**
     * @notice Cancels order.
     * @dev Order is cancelled by setting remaining amount to _ORDER_FILLED value
     * @param order Order quote to cancel
     * @return orderRemaining Unfilled amount of order before cancellation
     * @return orderHash Hash of the filled order
     */
    function cancelOrder(OrderLib.Order calldata order) external returns(uint256 orderRemaining, bytes32 orderHash);

    /**
     * @notice Fills an order. If one doesn't exist (first fill) it will be created using order.makerAssetData
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param interaction A call data for InteractiveNotificationReceiver. Taker may execute interaction after getting maker assets and before sending taker assets.
     * @param makingAmount Making amount
     * @param takingAmount Taking amount
     * @param skipPermitAndThresholdAmount Specifies maximum allowed takingAmount when takingAmount is zero, otherwise specifies minimum allowed makingAmount. Top-most bit specifies whether taker wants to skip maker's permit.
     * @return actualMakingAmount Actual amount transferred from maker to taker
     * @return actualTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrder(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount
    ) external payable returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash);

    /**
     * @notice Same as `fillOrderTo` but calls permit first,
     * allowing to approve token spending and make a swap in one transaction.
     * Also allows to specify funds destination instead of `msg.sender`
     * @dev See tests for examples
     * @param order Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param interaction A call data for InteractiveNotificationReceiver. Taker may execute interaction after getting maker assets and before sending taker assets.
     * @param makingAmount Making amount
     * @param takingAmount Taking amount
     * @param skipPermitAndThresholdAmount Specifies maximum allowed takingAmount when takingAmount is zero, otherwise specifies minimum allowed makingAmount. Top-most bit specifies whether taker wants to skip maker's permit.
     * @param target Address that will receive swap funds
     * @param permit Should consist of abiencoded token address and encoded `IERC20Permit.permit` call.
     * @return actualMakingAmount Actual amount transferred from maker to taker
     * @return actualTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderToWithPermit(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target,
        bytes calldata permit
    ) external returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash);

    /**
     * @notice Same as `fillOrder` but allows to specify funds destination instead of `msg.sender`
     * @param order_ Order quote to fill
     * @param signature Signature to confirm quote ownership
     * @param interaction A call data for InteractiveNotificationReceiver. Taker may execute interaction after getting maker assets and before sending taker assets.
     * @param makingAmount Making amount
     * @param takingAmount Taking amount
     * @param skipPermitAndThresholdAmount Specifies maximum allowed takingAmount when takingAmount is zero, otherwise specifies minimum allowed makingAmount. Top-most bit specifies whether taker wants to skip maker's permit.
     * @param target Address that will receive swap funds
     * @return actualMakingAmount Actual amount transferred from maker to taker
     * @return actualTakingAmount Actual amount transferred from taker to maker
     * @return orderHash Hash of the filled order
     */
    function fillOrderTo(
        OrderLib.Order calldata order_,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target
    ) external payable returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash);
}


// File @1inch/limit-order-protocol/contracts/interfaces/[email protected]


pragma solidity 0.8.17;

/// @title Interface for interactor which acts between `maker => taker` and `taker => maker` transfers.
interface PreInteractionNotificationReceiver {
    function fillOrderPreInteraction(
        bytes32 orderHash,
        address maker,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingAmount,
        bytes memory interactiveData
    ) external;
}

interface PostInteractionNotificationReceiver {
    /// @notice Callback method that gets called after taker transferred funds to maker but before
    /// the opposite transfer happened
    function fillOrderPostInteraction(
        bytes32 orderHash,
        address maker,
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 remainingAmount,
        bytes memory interactiveData
    ) external;
}

interface InteractionNotificationReceiver {
    function fillOrderInteraction(
        address taker,
        uint256 makingAmount,
        uint256 takingAmount,
        bytes memory interactiveData
    ) external returns(uint256 offeredTakingAmount);
}


// File @1inch/limit-order-protocol/contracts/[email protected]


pragma solidity 0.8.17;











/// @title Regular Limit Order mixin
abstract contract OrderMixin is IOrderMixin, EIP712, PredicateHelper {
    using SafeERC20 for IERC20;
    using ArgumentsDecoder for bytes;
    using OrderLib for OrderLib.Order;

    error UnknownOrder();
    error AccessDenied();
    error AlreadyFilled();
    error PermitLengthTooLow();
    error ZeroTargetIsForbidden();
    error RemainingAmountIsZero();
    error PrivateOrder();
    error BadSignature();
    error ReentrancyDetected();
    error PredicateIsNotTrue();
    error OnlyOneAmountShouldBeZero();
    error TakingAmountTooHigh();
    error MakingAmountTooLow();
    error SwapWithZeroAmount();
    error TransferFromMakerToTakerFailed();
    error TransferFromTakerToMakerFailed();
    error WrongAmount();
    error WrongGetter();
    error GetAmountCallFailed();
    error TakingAmountIncreased();
    error SimulationResults(bool success, bytes res);

    /// @notice Emitted every time order gets filled, including partial fills
    event OrderFilled(
        address indexed maker,
        bytes32 orderHash,
        uint256 remaining
    );

    /// @notice Emitted when order gets cancelled
    event OrderCanceled(
        address indexed maker,
        bytes32 orderHash,
        uint256 remainingRaw
    );

    uint256 constant private _ORDER_DOES_NOT_EXIST = 0;
    uint256 constant private _ORDER_FILLED = 1;
    uint256 constant private _SKIP_PERMIT_FLAG = 1 << 255;
    uint256 constant private _THRESHOLD_MASK = ~_SKIP_PERMIT_FLAG;

    IWETH private immutable _WETH;  // solhint-disable-line var-name-mixedcase
    /// @notice Stores unfilled amounts for each order plus one.
    /// Therefore 0 means order doesn't exist and 1 means order was filled
    mapping(bytes32 => uint256) private _remaining;

    constructor(IWETH weth) {
        _WETH = weth;
    }

    /**
     * @notice See {IOrderMixin-remaining}.
     */
    function remaining(bytes32 orderHash) external view returns(uint256 /* amount */) {
        uint256 amount = _remaining[orderHash];
        if (amount == _ORDER_DOES_NOT_EXIST) revert UnknownOrder();
        unchecked { return amount - 1; }
    }

    /**
     * @notice See {IOrderMixin-remainingRaw}.
     */
    function remainingRaw(bytes32 orderHash) external view returns(uint256 /* rawAmount */) {
        return _remaining[orderHash];
    }

    /**
     * @notice See {IOrderMixin-remainingsRaw}.
     */
    function remainingsRaw(bytes32[] memory orderHashes) external view returns(uint256[] memory /* rawAmounts */) {
        uint256[] memory results = new uint256[](orderHashes.length);
        for (uint256 i = 0; i < orderHashes.length; i++) {
            results[i] = _remaining[orderHashes[i]];
        }
        return results;
    }

    /**
     * @notice See {IOrderMixin-simulate}.
     */
    function simulate(address target, bytes calldata data) external {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory result) = target.delegatecall(data);
        revert SimulationResults(success, result);
    }

    /**
     * @notice See {IOrderMixin-cancelOrder}.
     */
    function cancelOrder(OrderLib.Order calldata order) external returns(uint256 orderRemaining, bytes32 orderHash) {
        if (order.maker != msg.sender) revert AccessDenied();

        orderHash = hashOrder(order);
        orderRemaining = _remaining[orderHash];
        if (orderRemaining == _ORDER_FILLED) revert AlreadyFilled();
        emit OrderCanceled(msg.sender, orderHash, orderRemaining);
        _remaining[orderHash] = _ORDER_FILLED;
    }

    /**
     * @notice See {IOrderMixin-fillOrder}.
     */
    function fillOrder(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount
    ) external payable returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */, bytes32 /* orderHash */) {
        return fillOrderTo(order, signature, interaction, makingAmount, takingAmount, skipPermitAndThresholdAmount, msg.sender);
    }

    /**
     * @notice See {IOrderMixin-fillOrderToWithPermit}.
     */
    function fillOrderToWithPermit(
        OrderLib.Order calldata order,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target,
        bytes calldata permit
    ) external returns(uint256 /* actualMakingAmount */, uint256 /* actualTakingAmount */, bytes32 /* orderHash */) {
        if (permit.length < 20) revert PermitLengthTooLow();
        {  // Stack too deep
            (address token, bytes calldata permitData) = permit.decodeTargetAndCalldata();
            IERC20(token).safePermit(permitData);
        }
        return fillOrderTo(order, signature, interaction, makingAmount, takingAmount, skipPermitAndThresholdAmount, target);
    }

    /**
     * @notice See {IOrderMixin-fillOrderTo}.
     */
    function fillOrderTo(
        OrderLib.Order calldata order_,
        bytes calldata signature,
        bytes calldata interaction,
        uint256 makingAmount,
        uint256 takingAmount,
        uint256 skipPermitAndThresholdAmount,
        address target
    ) public payable returns(uint256 actualMakingAmount, uint256 actualTakingAmount, bytes32 orderHash) {
        if (target == address(0)) revert ZeroTargetIsForbidden();
        orderHash = hashOrder(order_);

        OrderLib.Order calldata order = order_; // Helps with "Stack too deep"
        actualMakingAmount = makingAmount;
        actualTakingAmount = takingAmount;

        uint256 remainingMakingAmount = _remaining[orderHash];
        if (remainingMakingAmount == _ORDER_FILLED) revert RemainingAmountIsZero();
        if (order.allowedSender != address(0) && order.allowedSender != msg.sender) revert PrivateOrder();
        if (remainingMakingAmount == _ORDER_DOES_NOT_EXIST) {
            // First fill: validate order and permit maker asset
            if (!ECDSA.recoverOrIsValidSignature(order.maker, orderHash, signature)) revert BadSignature();
            remainingMakingAmount = order.makingAmount;

            bytes calldata permit = order.permit();
            if (skipPermitAndThresholdAmount & _SKIP_PERMIT_FLAG == 0 && permit.length >= 20) {
                // proceed only if taker is willing to execute permit and its length is enough to store address
                (address token, bytes calldata permitCalldata) = permit.decodeTargetAndCalldata();
                IERC20(token).safePermit(permitCalldata);
                if (_remaining[orderHash] != _ORDER_DOES_NOT_EXIST) revert ReentrancyDetected();
            }
        } else {
            unchecked { remainingMakingAmount -= 1; }
        }

        // Check if order is valid
        if (order.predicate().length > 0) {
            if (!checkPredicate(order)) revert PredicateIsNotTrue();
        }

        // Compute maker and taker assets amount
        if ((actualTakingAmount == 0) == (actualMakingAmount == 0)) {
            revert OnlyOneAmountShouldBeZero();
        } else if (actualTakingAmount == 0) {
            if (actualMakingAmount > remainingMakingAmount) {
                actualMakingAmount = remainingMakingAmount;
            }
            actualTakingAmount = _getTakingAmount(order.getTakingAmount(), order.makingAmount, actualMakingAmount, order.takingAmount, remainingMakingAmount, orderHash);
            uint256 thresholdAmount = skipPermitAndThresholdAmount & _THRESHOLD_MASK;
            // check that actual rate is not worse than what was expected
            // actualTakingAmount / actualMakingAmount <= thresholdAmount / makingAmount
            if (actualTakingAmount * makingAmount > thresholdAmount * actualMakingAmount) revert TakingAmountTooHigh();
        } else {
            actualMakingAmount = _getMakingAmount(order.getMakingAmount(), order.takingAmount, actualTakingAmount, order.makingAmount, remainingMakingAmount, orderHash);
            if (actualMakingAmount > remainingMakingAmount) {
                actualMakingAmount = remainingMakingAmount;
                actualTakingAmount = _getTakingAmount(order.getTakingAmount(), order.makingAmount, actualMakingAmount, order.takingAmount, remainingMakingAmount, orderHash);
                if (actualTakingAmount > takingAmount) revert TakingAmountIncreased();
            }
            uint256 thresholdAmount = skipPermitAndThresholdAmount & _THRESHOLD_MASK;
            // check that actual rate is not worse than what was expected
            // actualMakingAmount / actualTakingAmount >= thresholdAmount / takingAmount
            if (actualMakingAmount * takingAmount < thresholdAmount * actualTakingAmount) revert MakingAmountTooLow();
        }

        if (actualMakingAmount == 0 || actualTakingAmount == 0) revert SwapWithZeroAmount();

        // Update remaining amount in storage
        unchecked {
            remainingMakingAmount = remainingMakingAmount - actualMakingAmount;
            _remaining[orderHash] = remainingMakingAmount + 1;
        }
        emit OrderFilled(order_.maker, orderHash, remainingMakingAmount);

        // Maker can handle funds interactively
        if (order.preInteraction().length >= 20) {
            // proceed only if interaction length is enough to store address
            (address interactionTarget, bytes calldata interactionData) = order.preInteraction().decodeTargetAndCalldata();
            PreInteractionNotificationReceiver(interactionTarget).fillOrderPreInteraction(
                orderHash, order.maker, msg.sender, actualMakingAmount, actualTakingAmount, remainingMakingAmount, interactionData
            );
        }

        // Maker => Taker
        if (!_callTransferFrom(
            order.makerAsset,
            order.maker,
            target,
            actualMakingAmount,
            order.makerAssetData()
        )) revert TransferFromMakerToTakerFailed();

        if (interaction.length >= 20) {
            // proceed only if interaction length is enough to store address
            (address interactionTarget, bytes calldata interactionData) = interaction.decodeTargetAndCalldata();
            uint256 offeredTakingAmount = InteractionNotificationReceiver(interactionTarget).fillOrderInteraction(
                msg.sender, actualMakingAmount, actualTakingAmount, interactionData
            );

            if (offeredTakingAmount > actualTakingAmount &&
                !OrderLib.getterIsFrozen(order.getMakingAmount()) &&
                !OrderLib.getterIsFrozen(order.getTakingAmount()))
            {
                actualTakingAmount = offeredTakingAmount;
            }
        }

        // Taker => Maker
        if (order.takerAsset == address(_WETH) && msg.value > 0) {
            if (msg.value < actualTakingAmount) revert Errors.InvalidMsgValue();
            if (msg.value > actualTakingAmount) {
                unchecked {
                    (bool success, ) = msg.sender.call{value: msg.value - actualTakingAmount}("");  // solhint-disable-line avoid-low-level-calls
                    if (!success) revert Errors.ETHTransferFailed();
                }
            }
            _WETH.deposit{ value: actualTakingAmount }();
            _WETH.transfer(order.receiver == address(0) ? order.maker : order.receiver, actualTakingAmount);
        } else {
            if (msg.value != 0) revert Errors.InvalidMsgValue();
            if (!_callTransferFrom(
                order.takerAsset,
                msg.sender,
                order.receiver == address(0) ? order.maker : order.receiver,
                actualTakingAmount,
                order.takerAssetData()
            )) revert TransferFromTakerToMakerFailed();
        }

        // Maker can handle funds interactively
        if (order.postInteraction().length >= 20) {
            // proceed only if interaction length is enough to store address
            (address interactionTarget, bytes calldata interactionData) = order.postInteraction().decodeTargetAndCalldata();
            PostInteractionNotificationReceiver(interactionTarget).fillOrderPostInteraction(
                 orderHash, order.maker, msg.sender, actualMakingAmount, actualTakingAmount, remainingMakingAmount, interactionData
            );
        }
    }

    /**
     * @notice See {IOrderMixin-checkPredicate}.
     */
    function checkPredicate(OrderLib.Order calldata order) public view returns(bool) {
        (bool success, uint256 res) = _selfStaticCall(order.predicate());
        return success && res == 1;
    }

    /**
     * @notice See {IOrderMixin-hashOrder}.
     */
    function hashOrder(OrderLib.Order calldata order) public view returns(bytes32) {
        return order.hash(_domainSeparatorV4());
    }

    function _callTransferFrom(address asset, address from, address to, uint256 amount, bytes calldata input) private returns(bool success) {
        bytes4 selector = IERC20.transferFrom.selector;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)

            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            calldatacopy(add(data, 0x64), input.offset, input.length)
            let status := call(gas(), asset, 0, data, add(0x64, input.length), 0x0, 0x20)
            success := and(status, or(iszero(returndatasize()), and(gt(returndatasize(), 31), eq(mload(0), 1))))
        }
    }

    function _getMakingAmount(
        bytes calldata getter,
        uint256 orderTakingAmount,
        uint256 requestedTakingAmount,
        uint256 orderMakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) private view returns(uint256) {
        if (getter.length == 0) {
            // Linear proportion
            return AmountCalculator.getMakingAmount(orderMakingAmount, orderTakingAmount, requestedTakingAmount);
        }
        return _callGetter(getter, orderTakingAmount, requestedTakingAmount, orderMakingAmount, remainingMakingAmount, orderHash);
    }

    function _getTakingAmount(
        bytes calldata getter,
        uint256 orderMakingAmount,
        uint256 requestedMakingAmount,
        uint256 orderTakingAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) private view returns(uint256) {
        if (getter.length == 0) {
            // Linear proportion
            return AmountCalculator.getTakingAmount(orderMakingAmount, orderTakingAmount, requestedMakingAmount);
        }
        return _callGetter(getter, orderMakingAmount, requestedMakingAmount, orderTakingAmount, remainingMakingAmount, orderHash);
    }

    function _callGetter(
        bytes calldata getter,
        uint256 orderExpectedAmount,
        uint256 requestedAmount,
        uint256 orderResultAmount,
        uint256 remainingMakingAmount,
        bytes32 orderHash
    ) private view returns(uint256) {
        if (getter.length == 1) {
            if (OrderLib.getterIsFrozen(getter)) {
                // On "x" getter calldata only exact amount is allowed
                if (requestedAmount != orderExpectedAmount) revert WrongAmount();
                return orderResultAmount;
            } else {
                revert WrongGetter();
            }
        } else {
            (address target, bytes calldata data) = getter.decodeTargetAndCalldata();
            (bool success, bytes memory result) = target.staticcall(abi.encodePacked(data, requestedAmount, remainingMakingAmount, orderHash));
            if (!success || result.length != 32) revert GetAmountCallFailed();
            return abi.decode(result, (uint256));
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/[email protected]

// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}


// File contracts/AggregationRouterV5.sol


pragma solidity 0.8.17;









/// @notice Main contract incorporates a number of routers to perform swaps and limit orders protocol to fill limit orders
contract AggregationRouterV5 is EIP712("1inch Aggregation Router", "5"), Ownable,
    ClipperRouter, GenericRouter, UnoswapRouter, UnoswapV3Router, OrderMixin, OrderRFQMixin
{
    using UniERC20 for IERC20;

    error ZeroAddress();

    /**
     * @dev Sets the wrapped eth token and clipper exhange interface
     * Both values are immutable: they can only be set once during
     * construction.
     */
    constructor(IWETH weth)
        UnoswapV3Router(weth)
        ClipperRouter(weth)
        OrderMixin(weth)
        OrderRFQMixin(weth)
    {
        if (address(weth) == address(0)) revert ZeroAddress();
    }

    /**
     * @notice Retrieves funds accidently sent directly to the contract address
     * @param token ERC20 token to retrieve
     * @param amount amount to retrieve
     */
    function rescueFunds(IERC20 token, uint256 amount) external onlyOwner {
        token.uniTransfer(payable(msg.sender), amount);
    }

    /**
     * @notice Destroys the contract and sends eth to sender. Use with caution.
     * The only case when the use of the method is justified is if there is an exploit found.
     * And the damage from the exploit is greater than from just an urgent contract change.
     */
    function destroy() external onlyOwner {
        selfdestruct(payable(msg.sender));
    }

    function _receive() internal override(EthReceiver, OnlyWethReceiver) {
        EthReceiver._receive();
    }
}

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}