pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract CommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) != Constants.ETH) {
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        bytes memory encodedData = abi.encodePacked(method, data);
        aggregator.functionCallWithValue(encodedData, msg.value);
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            uint256 balance = tokenFrom.balanceOf(address(this));
            _transfer(tokenFrom, balance, recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }
    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
library Constants {
    address internal constant ETH = 0x0000000000000000000000000000000000000000;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
contract FeeCommonAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet) public {
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // We always forward msg.value as it may be necessary to pay fees
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract FeeWethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    IWETH public immutable weth;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(IWETH _weth, address payable feeWallet) public {
        weth = _weth;
        FEE_WALLET = feeWallet;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IWETH is IERC20 {
    function deposit() external payable;
    function withdraw(uint256) external;
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol";
import "../Constants.sol";
contract UniswapAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    using SafeMath for uint256;
    // solhint-disable-next-line var-name-mixedcase
    IUniswapV2Router02 public immutable UNISWAP;
    // solhint-disable-next-line var-name-mixedcase
    address payable public immutable FEE_WALLET;
    constructor(address payable feeWallet, IUniswapV2Router02 uniswap) public {
        FEE_WALLET = feeWallet;
        UNISWAP = uniswap;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param path Used by Uniswap
     * @param deadline Timestamp at which the swap becomes invalid. Used by Uniswap
     * @param feeOnTransfer Use `supportingFeeOnTransfer` Uniswap methods
     * @param fee Amount of tokenFrom sent to the fee wallet
     */
    function swap(
        address payable recipient,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        address[] calldata path,
        uint256 deadline,
        bool feeOnTransfer,
        uint256 fee
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            FEE_WALLET.sendValue(fee);
        } else {
            _transfer(tokenFrom, fee, FEE_WALLET);
        }
        if (address(tokenFrom) == Constants.ETH) {
            if (feeOnTransfer) {
                UNISWAP.swapExactETHForTokensSupportingFeeOnTransferTokens{
                    value: address(this).balance
                }(amountTo, path, address(this), deadline);
            } else {
                UNISWAP.swapExactETHForTokens{value: address(this).balance}(
                    amountTo,
                    path,
                    address(this),
                    deadline
                );
            }
        } else {
            _approveSpender(tokenFrom, address(UNISWAP), amountFrom);
            if (address(tokenTo) == Constants.ETH) {
                if (feeOnTransfer) {
                    UNISWAP.swapExactTokensForETHSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForETH(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            } else {
                if (feeOnTransfer) {
                    UNISWAP
                        .swapExactTokensForTokensSupportingFeeOnTransferTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                } else {
                    UNISWAP.swapExactTokensForTokens(
                        amountFrom,
                        amountTo,
                        path,
                        address(this),
                        deadline
                    );
                }
            }
        }
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, then check that the remaining ETH balance >= amountTo
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
pragma solidity >=0.6.2;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 is IUniswapV2Router01 {
    function removeLiquidityETHSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountETH);
    function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountETH);
    function swapExactTokensForTokensSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
    function swapExactETHForTokensSupportingFeeOnTransferTokens(
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external payable;
    function swapExactTokensForETHSupportingFeeOnTransferTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external;
}
pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
    function factory() external pure returns (address);
    function WETH() external pure returns (address);
    function addLiquidity(
        address tokenA,
        address tokenB,
        uint amountADesired,
        uint amountBDesired,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB, uint liquidity);
    function addLiquidityETH(
        address token,
        uint amountTokenDesired,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external payable returns (uint amountToken, uint amountETH, uint liquidity);
    function removeLiquidity(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETH(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline
    ) external returns (uint amountToken, uint amountETH);
    function removeLiquidityWithPermit(
        address tokenA,
        address tokenB,
        uint liquidity,
        uint amountAMin,
        uint amountBMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountA, uint amountB);
    function removeLiquidityETHWithPermit(
        address token,
        uint liquidity,
        uint amountTokenMin,
        uint amountETHMin,
        address to,
        uint deadline,
        bool approveMax, uint8 v, bytes32 r, bytes32 s
    ) external returns (uint amountToken, uint amountETH);
    function swapExactTokensForTokens(
        uint amountIn,
        uint amountOutMin,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapTokensForExactTokens(
        uint amountOut,
        uint amountInMax,
        address[] calldata path,
        address to,
        uint deadline
    ) external returns (uint[] memory amounts);
    function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
        external
        returns (uint[] memory amounts);
    function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
        external
        payable
        returns (uint[] memory amounts);
    function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
    function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
    function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
    function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
    function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "../Constants.sol";
import "../IWETH.sol";
contract WethAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    IWETH public immutable weth;
    constructor(IWETH _weth) public {
        weth = _weth;
    }
    /**
     * @dev Performs a swap
     * @param recipient The original msg.sender performing the swap
     * @param aggregator Address of the aggregator's contract
     * @param spender Address to which tokens will be approved
     * @param method Selector of the function to be called in the aggregator's contract
     * @param tokenFrom Token to be swapped
     * @param tokenTo Token to be received
     * @param amountFrom Amount of tokenFrom to swap
     * @param amountTo Minimum amount of tokenTo to receive
     * @param data Data used for the call made to the aggregator's contract
     */
    function swap(
        address payable recipient,
        address aggregator,
        address spender,
        bytes4 method,
        IERC20 tokenFrom,
        IERC20 tokenTo,
        uint256 amountFrom,
        uint256 amountTo,
        bytes calldata data
    ) external payable {
        require(tokenFrom != tokenTo, "TOKEN_PAIR_INVALID");
        if (address(tokenFrom) == Constants.ETH) {
            // If tokenFrom is ETH, msg.value = fee + amountFrom (total fee could be 0)
            // Can't deal with ETH, convert to WETH, the remaining balance will be the fee
            weth.deposit{value: amountFrom}();
            _approveSpender(weth, spender, amountFrom);
        } else {
            // Otherwise capture tokens from sender
            _approveSpender(tokenFrom, spender, amountFrom);
        }
        // Perform the swap
        aggregator.functionCallWithValue(
            abi.encodePacked(method, data),
            address(this).balance
        );
        // Transfer remaining balance of tokenFrom to sender
        if (address(tokenFrom) != Constants.ETH) {
            _transfer(tokenFrom, tokenFrom.balanceOf(address(this)), recipient);
        } else {
            // If using ETH, just unwrap any remaining WETH
            // At the end of this function all ETH will be transferred to the sender
            _unwrapWETH();
        }
        uint256 weiBalance = address(this).balance;
        // Transfer remaining balance of tokenTo to sender
        if (address(tokenTo) != Constants.ETH) {
            uint256 balance = tokenTo.balanceOf(address(this));
            require(balance >= amountTo, "INSUFFICIENT_AMOUNT");
            _transfer(tokenTo, balance, recipient);
        } else {
            // If tokenTo == ETH, unwrap received WETH and add it to the wei balance,
            // then check that the remaining ETH balance >= amountTo
            // It is safe to not use safeMath as no one can have enough Ether to overflow
            weiBalance += _unwrapWETH();
            require(weiBalance >= amountTo, "INSUFFICIENT_AMOUNT");
        }
        // If there are unused fees or if tokenTo is ETH, transfer to sender
        if (weiBalance > 0) {
            recipient.sendValue(weiBalance);
        }
    }
    /**
     * @dev Unwraps all available WETH into ETH
     */
    function _unwrapWETH() internal returns (uint256) {
        uint256 balance = weth.balanceOf(address(this));
        weth.withdraw(balance);
        return balance;
    }
    /**
     * @dev Transfers token to sender if amount > 0
     * @param token IERC20 token to transfer to sender
     * @param amount Amount of token to transfer
     * @param recipient Address that will receive the tokens
     */
    function _transfer(
        IERC20 token,
        uint256 amount,
        address recipient
    ) internal {
        if (amount > 0) {
            token.safeTransfer(recipient, amount);
        }
    }
    // https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/SafeERC20.sol
    /**
     * @dev Approves max amount of token to the spender if the allowance is lower than amount
     * @param token The ERC20 token to approve
     * @param spender Address to which funds will be approved
     * @param amount Amount used to compare current allowance
     */
    function _approveSpender(
        IERC20 token,
        address spender,
        uint256 amount
    ) internal {
        // If allowance is not enough, approve max possible amount
        uint256 allowance = token.allowance(address(this), spender);
        if (allowance < amount) {
            bytes memory returndata = address(token).functionCall(
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    type(uint256).max
                )
            );
            if (returndata.length > 0) {
                // Return data is optional
                require(abi.decode(returndata, (bool)), "APPROVAL_FAILED");
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface ICHI is IERC20 {
    function freeUpTo(uint256 value) external returns (uint256);
    function freeFromUpTo(
        address from,
        uint256 value
    ) external returns (uint256);
    function mint(uint256 value) external;
}
  
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.0;
// We import the contract so truffle compiles it, and we have the ABI
// available when working from truffle console.
import "@openzeppelin/contracts/token/ERC20/ERC20.sol"; //helpers// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;
    mapping (address => uint256) private _balances;
    mapping (address => mapping (address => uint256)) private _allowances;
    uint256 private _totalSupply;
    string private _name;
    string private _symbol;
    uint8 private _decimals;
    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }
    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }
    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }
    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }
    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }
    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }
    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }
    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }
    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }
    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }
    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }
    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        _beforeTokenTransfer(sender, recipient, amount);
        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }
    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");
        _beforeTokenTransfer(address(0), account, amount);
        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }
    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");
        _beforeTokenTransfer(account, address(0), amount);
        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }
    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }
    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }
    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./ICHI.sol";
import "./Spender.sol";
/**
 * @title MetaSwap
 */
contract MetaSwap is Ownable, Pausable, ReentrancyGuard {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    struct Adapter {
        address addr; // adapter's address
        bytes4 selector;
        bytes data; // adapter's fixed data
    }
    ICHI public immutable chi;
    Spender public immutable spender;
    // Mapping of aggregatorId to aggregator
    mapping(string => Adapter) public adapters;
    mapping(string => bool) public adapterRemoved;
    event AdapterSet(
        string indexed aggregatorId,
        address indexed addr,
        bytes4 selector,
        bytes data
    );
    event AdapterRemoved(string indexed aggregatorId);
    event Swap(string indexed aggregatorId, address indexed sender);
    constructor(ICHI _chi) public {
        chi = _chi;
        spender = new Spender();
    }
    /**
     * @dev Sets the adapter for an aggregator. It can't be changed later.
     * @param aggregatorId Aggregator's identifier
     * @param addr Address of the contract that contains the logic for this aggregator
     * @param selector The function selector of the swap function in the adapter
     * @param data Fixed abi encoded data the will be passed in each delegatecall made to the adapter
     */
    function setAdapter(
        string calldata aggregatorId,
        address addr,
        bytes4 selector,
        bytes calldata data
    ) external onlyOwner {
        require(addr.isContract(), "ADAPTER_IS_NOT_A_CONTRACT");
        require(!adapterRemoved[aggregatorId], "ADAPTER_REMOVED");
        Adapter storage adapter = adapters[aggregatorId];
        require(adapter.addr == address(0), "ADAPTER_EXISTS");
        adapter.addr = addr;
        adapter.selector = selector;
        adapter.data = data;
        emit AdapterSet(aggregatorId, addr, selector, data);
    }
    /**
     * @dev Removes the adapter for an existing aggregator. This can't be undone.
     * @param aggregatorId Aggregator's identifier
     */
    function removeAdapter(string calldata aggregatorId) external onlyOwner {
        require(
            adapters[aggregatorId].addr != address(0),
            "ADAPTER_DOES_NOT_EXIST"
        );
        delete adapters[aggregatorId];
        adapterRemoved[aggregatorId] = true;
        emit AdapterRemoved(aggregatorId);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        _swap(aggregatorId, tokenFrom, amount, data);
    }
    /**
     * @dev Performs a swap
     * @param aggregatorId Identifier of the aggregator to be used for the swap
     * @param data Dynamic data which is concatenated with the fixed aggregator's
     * data in the delecatecall made to the adapter
     */
    function swapUsingGasToken(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) external payable whenNotPaused nonReentrant {
        uint256 gas = gasleft();
        _swap(aggregatorId, tokenFrom, amount, data);
        uint256 gasSpent = 21000 + gas - gasleft() + 16 * msg.data.length;
        chi.freeFromUpTo(msg.sender, (gasSpent + 14154) / 41947);
    }
    function pauseSwaps() external onlyOwner {
        _pause();
    }
    function unpauseSwaps() external onlyOwner {
        _unpause();
    }
    function _swap(
        string calldata aggregatorId,
        IERC20 tokenFrom,
        uint256 amount,
        bytes calldata data
    ) internal {
        Adapter storage adapter = adapters[aggregatorId];
        if (address(tokenFrom) != Constants.ETH) {
            tokenFrom.safeTransferFrom(msg.sender, address(spender), amount);
        }
        spender.swap{value: msg.value}(
            adapter.addr,
            abi.encodePacked(
                adapter.selector,
                abi.encode(msg.sender),
                adapter.data,
                data
            )
        );
        emit Swap(aggregatorId, msg.sender);
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);
    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);
    bool private _paused;
    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }
    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }
    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }
    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }
    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    constructor () internal {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
        _;
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "./Constants.sol";
contract Spender {
    address public immutable metaswap;
    constructor() public {
        metaswap = msg.sender;
    }
    /// @dev Receives ether from swaps
    fallback() external payable {}
    function swap(address adapter, bytes calldata data) external payable {
        require(msg.sender == metaswap, "FORBIDDEN");
        require(adapter != address(0), "ADAPTER_NOT_PROVIDED");
        _delegate(adapter, data, "ADAPTER_DELEGATECALL_FAILED");
    }
    /**
     * @dev Performs a delegatecall and bubbles up the errors, adapted from
     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol
     * @param target Address of the contract to delegatecall
     * @param data Data passed in the delegatecall
     * @param errorMessage Fallback revert reason
     */
    function _delegate(
        address target,
        bytes memory data,
        string memory errorMessage
    ) private returns (bytes memory) {
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Address.sol";
contract MockAdapter {
    using SafeERC20 for IERC20;
    using Address for address;
    using Address for address payable;
    event MockAdapterEvent(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    );
    function test(
        address sender,
        uint256 valueFixed,
        uint256 valueDynamic
    ) external payable {
        emit MockAdapterEvent(sender, valueFixed, valueDynamic);
    }
    function testRevert(
        address,
        uint256,
        uint256
    ) external payable {
        revert("SWAP_FAILED");
    }
    function testRevertNoReturnData(
        address,
        uint256,
        uint256
    ) external payable {
        revert();
    }
}
pragma solidity ^0.6.0;
// TAKEN FROM https://github.com/gnosis/mock-contract
// TODO: use their npm package once it is published for solidity 0.6
interface MockInterface {
    /**
     * @dev After calling this method, the mock will return `response` when it is called
     * with any calldata that is not mocked more specifically below
     * (e.g. using givenMethodReturn).
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenAnyReturn(bytes calldata response) external;
    function givenAnyReturnBool(bool response) external;
    function givenAnyReturnUint(uint256 response) external;
    function givenAnyReturnAddress(address response) external;
    function givenAnyRevert() external;
    function givenAnyRevertWithMessage(string calldata message) external;
    function givenAnyRunOutOfGas() external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called regardless of arguments. If the methodId and arguments
     * are mocked more specifically (using `givenMethodAndArguments`) the latter
     * will take precedence.
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     * @param response ABI encoded response that will be returned if method is invoked
     */
    function givenMethodReturn(bytes calldata method, bytes calldata response)
        external;
    function givenMethodReturnBool(bytes calldata method, bool response)
        external;
    function givenMethodReturnUint(bytes calldata method, uint256 response)
        external;
    function givenMethodReturnAddress(bytes calldata method, address response)
        external;
    function givenMethodRevert(bytes calldata method) external;
    function givenMethodRevertWithMessage(
        bytes calldata method,
        string calldata message
    ) external;
    function givenMethodRunOutOfGas(bytes calldata method) external;
    /**
     * @dev After calling this method, the mock will return `response` when the given
     * methodId is called with matching arguments. These exact calldataMocks will take
     * precedence over all other calldataMocks.
     * @param call ABI encoded calldata (methodId and arguments)
     * @param response ABI encoded response that will be returned if contract is invoked with calldata
     */
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external;
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external;
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external;
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external;
    function givenCalldataRevert(bytes calldata call) external;
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external;
    function givenCalldataRunOutOfGas(bytes calldata call) external;
    /**
     * @dev Returns the number of times anything has been called on this mock since last reset
     */
    function invocationCount() external returns (uint256);
    /**
     * @dev Returns the number of times the given method has been called on this mock since last reset
     * @param method ABI encoded methodId. It is valid to pass full calldata (including arguments). The mock will extract the methodId from it
     */
    function invocationCountForMethod(bytes calldata method)
        external
        returns (uint256);
    /**
     * @dev Returns the number of times this mock has been called with the exact calldata since last reset.
     * @param call ABI encoded calldata (methodId and arguments)
     */
    function invocationCountForCalldata(bytes calldata call)
        external
        returns (uint256);
    /**
     * @dev Resets all mocked methods and invocation counts.
     */
    function reset() external;
}
/**
 * Implementation of the MockInterface.
 */
contract MockContract is MockInterface {
    enum MockType {Return, Revert, OutOfGas}
    bytes32 public constant MOCKS_LIST_START = hex"01";
    bytes public constant MOCKS_LIST_END = "0xff";
    bytes32 public constant MOCKS_LIST_END_HASH = keccak256(MOCKS_LIST_END);
    bytes4 public constant SENTINEL_ANY_MOCKS = hex"01";
    bytes public constant DEFAULT_FALLBACK_VALUE = abi.encode(false);
    // A linked list allows easy iteration and inclusion checks
    mapping(bytes32 => bytes) calldataMocks;
    mapping(bytes => MockType) calldataMockTypes;
    mapping(bytes => bytes) calldataExpectations;
    mapping(bytes => string) calldataRevertMessage;
    mapping(bytes32 => uint256) calldataInvocations;
    mapping(bytes4 => bytes4) methodIdMocks;
    mapping(bytes4 => MockType) methodIdMockTypes;
    mapping(bytes4 => bytes) methodIdExpectations;
    mapping(bytes4 => string) methodIdRevertMessages;
    mapping(bytes32 => uint256) methodIdInvocations;
    MockType fallbackMockType;
    bytes fallbackExpectation = DEFAULT_FALLBACK_VALUE;
    string fallbackRevertMessage;
    uint256 invocations;
    uint256 resetCount;
    constructor() public {
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
    }
    function trackCalldataMock(bytes memory call) private {
        bytes32 callHash = keccak256(call);
        if (calldataMocks[callHash].length == 0) {
            calldataMocks[callHash] = calldataMocks[MOCKS_LIST_START];
            calldataMocks[MOCKS_LIST_START] = call;
        }
    }
    function trackMethodIdMock(bytes4 methodId) private {
        if (methodIdMocks[methodId] == 0x0) {
            methodIdMocks[methodId] = methodIdMocks[SENTINEL_ANY_MOCKS];
            methodIdMocks[SENTINEL_ANY_MOCKS] = methodId;
        }
    }
    function _givenAnyReturn(bytes memory response) internal {
        fallbackMockType = MockType.Return;
        fallbackExpectation = response;
    }
    function givenAnyReturn(bytes calldata response) external override {
        _givenAnyReturn(response);
    }
    function givenAnyReturnBool(bool response) external override {
        uint256 flag = response ? 1 : 0;
        _givenAnyReturn(uintToBytes(flag));
    }
    function givenAnyReturnUint(uint256 response) external override {
        _givenAnyReturn(uintToBytes(response));
    }
    function givenAnyReturnAddress(address response) external override {
        _givenAnyReturn(uintToBytes(uint256(response)));
    }
    function givenAnyRevert() external override {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = "";
    }
    function givenAnyRevertWithMessage(string calldata message)
        external
        override
    {
        fallbackMockType = MockType.Revert;
        fallbackRevertMessage = message;
    }
    function givenAnyRunOutOfGas() external override {
        fallbackMockType = MockType.OutOfGas;
    }
    function _givenCalldataReturn(bytes memory call, bytes memory response)
        private
    {
        calldataMockTypes[call] = MockType.Return;
        calldataExpectations[call] = response;
        trackCalldataMock(call);
    }
    function givenCalldataReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenCalldataReturn(call, response);
    }
    function givenCalldataReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenCalldataReturn(call, uintToBytes(flag));
    }
    function givenCalldataReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(response));
    }
    function givenCalldataReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenCalldataReturn(call, uintToBytes(uint256(response)));
    }
    function _givenMethodReturn(bytes memory call, bytes memory response)
        private
    {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Return;
        methodIdExpectations[method] = response;
        trackMethodIdMock(method);
    }
    function givenMethodReturn(bytes calldata call, bytes calldata response)
        external
        override
    {
        _givenMethodReturn(call, response);
    }
    function givenMethodReturnBool(bytes calldata call, bool response)
        external
        override
    {
        uint256 flag = response ? 1 : 0;
        _givenMethodReturn(call, uintToBytes(flag));
    }
    function givenMethodReturnUint(bytes calldata call, uint256 response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(response));
    }
    function givenMethodReturnAddress(bytes calldata call, address response)
        external
        override
    {
        _givenMethodReturn(call, uintToBytes(uint256(response)));
    }
    function givenCalldataRevert(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = "";
        trackCalldataMock(call);
    }
    function givenMethodRevert(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        trackMethodIdMock(method);
    }
    function givenCalldataRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        calldataMockTypes[call] = MockType.Revert;
        calldataRevertMessage[call] = message;
        trackCalldataMock(call);
    }
    function givenMethodRevertWithMessage(
        bytes calldata call,
        string calldata message
    ) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.Revert;
        methodIdRevertMessages[method] = message;
        trackMethodIdMock(method);
    }
    function givenCalldataRunOutOfGas(bytes calldata call) external override {
        calldataMockTypes[call] = MockType.OutOfGas;
        trackCalldataMock(call);
    }
    function givenMethodRunOutOfGas(bytes calldata call) external override {
        bytes4 method = bytesToBytes4(call);
        methodIdMockTypes[method] = MockType.OutOfGas;
        trackMethodIdMock(method);
    }
    function invocationCount() external override returns (uint256) {
        return invocations;
    }
    function invocationCountForMethod(bytes calldata call)
        external
        override
        returns (uint256)
    {
        bytes4 method = bytesToBytes4(call);
        return
            methodIdInvocations[keccak256(
                abi.encodePacked(resetCount, method)
            )];
    }
    function invocationCountForCalldata(bytes calldata call)
        external
        override
        returns (uint256)
    {
        return
            calldataInvocations[keccak256(abi.encodePacked(resetCount, call))];
    }
    function reset() external override {
        // Reset all exact calldataMocks
        bytes memory nextMock = calldataMocks[MOCKS_LIST_START];
        bytes32 mockHash = keccak256(nextMock);
        // We cannot compary bytes
        while (mockHash != MOCKS_LIST_END_HASH) {
            // Reset all mock maps
            calldataMockTypes[nextMock] = MockType.Return;
            calldataExpectations[nextMock] = hex"";
            calldataRevertMessage[nextMock] = "";
            // Set next mock to remove
            nextMock = calldataMocks[mockHash];
            // Remove from linked list
            calldataMocks[mockHash] = "";
            // Update mock hash
            mockHash = keccak256(nextMock);
        }
        // Clear list
        calldataMocks[MOCKS_LIST_START] = MOCKS_LIST_END;
        // Reset all any calldataMocks
        bytes4 nextAnyMock = methodIdMocks[SENTINEL_ANY_MOCKS];
        while (nextAnyMock != SENTINEL_ANY_MOCKS) {
            bytes4 currentAnyMock = nextAnyMock;
            methodIdMockTypes[currentAnyMock] = MockType.Return;
            methodIdExpectations[currentAnyMock] = hex"";
            methodIdRevertMessages[currentAnyMock] = "";
            nextAnyMock = methodIdMocks[currentAnyMock];
            // Remove from linked list
            methodIdMocks[currentAnyMock] = 0x0;
        }
        // Clear list
        methodIdMocks[SENTINEL_ANY_MOCKS] = SENTINEL_ANY_MOCKS;
        fallbackExpectation = DEFAULT_FALLBACK_VALUE;
        fallbackMockType = MockType.Return;
        invocations = 0;
        resetCount += 1;
    }
    function useAllGas() private {
        while (true) {
            bool s;
            assembly {
                //expensive call to EC multiply contract
                s := call(sub(gas(), 2000), 6, 0, 0x0, 0xc0, 0x0, 0x60)
            }
        }
    }
    function bytesToBytes4(bytes memory b) private pure returns (bytes4) {
        bytes4 out;
        for (uint256 i = 0; i < 4; i++) {
            out |= bytes4(b[i] & 0xFF) >> (i * 8);
        }
        return out;
    }
    function uintToBytes(uint256 x) private pure returns (bytes memory b) {
        b = new bytes(32);
        assembly {
            mstore(add(b, 32), x)
        }
    }
    function updateInvocationCount(
        bytes4 methodId,
        bytes memory originalMsgData
    ) public {
        require(
            msg.sender == address(this),
            "Can only be called from the contract itself"
        );
        invocations += 1;
        methodIdInvocations[keccak256(
            abi.encodePacked(resetCount, methodId)
        )] += 1;
        calldataInvocations[keccak256(
            abi.encodePacked(resetCount, originalMsgData)
        )] += 1;
    }
    fallback() external payable {
        bytes4 methodId;
        assembly {
            methodId := calldataload(0)
        }
        // First, check exact matching overrides
        if (calldataMockTypes[msg.data] == MockType.Revert) {
            revert(calldataRevertMessage[msg.data]);
        }
        if (calldataMockTypes[msg.data] == MockType.OutOfGas) {
            useAllGas();
        }
        bytes memory result = calldataExpectations[msg.data];
        // Then check method Id overrides
        if (result.length == 0) {
            if (methodIdMockTypes[methodId] == MockType.Revert) {
                revert(methodIdRevertMessages[methodId]);
            }
            if (methodIdMockTypes[methodId] == MockType.OutOfGas) {
                useAllGas();
            }
            result = methodIdExpectations[methodId];
        }
        // Last, use the fallback override
        if (result.length == 0) {
            if (fallbackMockType == MockType.Revert) {
                revert(fallbackRevertMessage);
            }
            if (fallbackMockType == MockType.OutOfGas) {
                useAllGas();
            }
            result = fallbackExpectation;
        }
        // Record invocation as separate call so we don't rollback in case we are called with STATICCALL
        (, bytes memory r) = address(this).call{gas: 100000}(
            abi.encodeWithSignature(
                "updateInvocationCount(bytes4,bytes)",
                methodId,
                msg.data
            )
        );
        assert(r.length == 0);
        assembly {
            return(add(0x20, result), mload(result))
        }
    }
}
pragma solidity ^0.6.0;
contract MockSelfDestruct {
    constructor() public payable {}
    fallback() external payable {
        selfdestruct(msg.sender);
    }
    function kill(address payable target) external payable {
        selfdestruct(target);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }
    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;
    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;
    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);
    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }
    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }
    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }
    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized != type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }
    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }
    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuardUpgradeable is Initializable {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.
    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;
    uint256 private _status;
    function __ReentrancyGuard_init() internal onlyInitializing {
        __ReentrancyGuard_init_unchained();
    }
    function __ReentrancyGuard_init_unchained() internal onlyInitializing {
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }
    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }
    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.
        return account.code.length > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }
    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }
    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }
    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol";
import "./UnxswapRouter.sol";
import "./UnxswapV3Router.sol";
import "./interfaces/IWETH.sol";
import "./interfaces/IAdapter.sol";
import "./interfaces/IApproveProxy.sol";
import "./interfaces/IWNativeRelayer.sol";
import "./interfaces/IXBridge.sol";
import "./libraries/Permitable.sol";
import "./libraries/PMMLib.sol";
import "./libraries/CommissionLib.sol";
import "./libraries/EthReceiver.sol";
import "./libraries/WrapETHSwap.sol";
import "./libraries/CommonUtils.sol";
import "./storage/DexRouterStorage.sol";
/// @title DexRouterV1
/// @notice Entrance of Split trading in Dex platform
/// @dev Entrance of Split trading in Dex platform
contract DexRouter is
    OwnableUpgradeable,
    ReentrancyGuardUpgradeable,
    Permitable,
    EthReceiver,
    UnxswapRouter,
    UnxswapV3Router,
    DexRouterStorage,
    WrapETHSwap,
    CommissionLib
{
    using UniversalERC20 for IERC20;
    struct BaseRequest {
        uint256 fromToken;
        address toToken;
        uint256 fromTokenAmount;
        uint256 minReturnAmount;
        uint256 deadLine;
    }
    struct RouterPath {
        address[] mixAdapters;
        address[] assetTo;
        uint256[] rawData;
        bytes[] extraData;
        uint256 fromToken;
    }
    /// @notice Initializes the contract with necessary setup for ownership and reentrancy protection.
    /// @dev This function serves as a constructor for upgradeable contracts and should be called
    /// through a proxy during the initial deployment. It initializes inherited contracts
    /// such as `OwnableUpgradeable` and `ReentrancyGuardUpgradeable` to set up the contract's owner
    /// and reentrancy guard.
    function initialize() public initializer {
        __Ownable_init();
        __ReentrancyGuard_init();
    }
    //-------------------------------
    //------- Events ----------------
    //-------------------------------
    /// @notice Emitted when a priority address status is updated.
    /// @param priorityAddress The address whose priority status has been changed.
    /// @param valid A boolean indicating the new status of the priority address.
    /// True means the address is now considered a priority address, and false means it is not.
    event PriorityAddressChanged(address priorityAddress, bool valid);
    /// @notice Emitted when the admin address of the contract is changed.
    /// @param newAdmin The address of the new admin.
    event AdminChanged(address newAdmin);
    //-------------------------------
    //------- Modifier --------------
    //-------------------------------
    /// @notice Ensures a function is called before a specified deadline.
    /// @param deadLine The UNIX timestamp deadline.
    modifier isExpired(uint256 deadLine) {
        require(deadLine >= block.timestamp, "Route: expired");
        _;
    }
    /// @notice Restricts function access to addresses marked as priority.
    /// Ensures that only addresses designated with specific privileges can execute the function.
    modifier onlyPriorityAddress() {
        require(priorityAddresses[msg.sender] == true, "only priority");
        _;
    }
    //-------------------------------
    //------- Internal Functions ----
    //-------------------------------
    /// @notice Executes multiple adapters for a transaction pair.
    /// @param payer The address of the payer.
    /// @param to The address of the receiver.
    /// @param batchAmount The amount to be transferred in each batch.
    /// @param path The routing path for the swap.
    /// @param noTransfer A flag to indicate whether the token transfer should be skipped.
    /// @dev It includes checks for the total weight of the paths and executes the swapping through the adapters.
    function _exeForks(
        address payer,
        address to,
        uint256 batchAmount,
        RouterPath calldata path,
        bool noTransfer
    ) private {
        address fromToken = _bytes32ToAddress(path.fromToken);
        // fix post audit DRW-01: lack of check on Weights
        uint256 totalWeight;
        // execute multiple Adapters for a transaction pair
        uint256 pathLength = path.mixAdapters.length;
        for (uint256 i = 0; i < pathLength; ) {
            bytes32 rawData = bytes32(path.rawData[i]);
            address poolAddress;
            bool reserves;
            uint256 weight;
            assembly {
                poolAddress := and(rawData, _ADDRESS_MASK)
                reserves := and(rawData, _REVERSE_MASK)
                weight := shr(160, and(rawData, _WEIGHT_MASK))
            }
            totalWeight += weight;
            if (i == pathLength - 1) {
                require(
                    totalWeight <= 10_000,
                    "totalWeight can not exceed 10000 limit"
                );
            }
            if (!noTransfer) {
                uint256 _fromTokenAmount = weight == 10_000
                    ? batchAmount
                    : (batchAmount * weight) / 10_000;
                _transferInternal(
                    payer,
                    path.assetTo[i],
                    fromToken,
                    _fromTokenAmount
                );
            }
            if (reserves) {
                IAdapter(path.mixAdapters[i]).sellQuote(
                    to,
                    poolAddress,
                    path.extraData[i]
                );
            } else {
                IAdapter(path.mixAdapters[i]).sellBase(
                    to,
                    poolAddress,
                    path.extraData[i]
                );
            }
            unchecked {
                ++i;
            }
        }
    }
    /// @notice Executes a series of swaps or operations defined by a set of routing paths, potentially across different protocols or pools.
    /// @param payer The address providing the tokens for the swap.
    /// @param receiver The address receiving the output tokens.
    /// @param isToNative Indicates whether the final asset should be converted to the native blockchain asset (e.g., ETH).
    /// @param batchAmount The total amount of the input token to be swapped.
    /// @param hops An array of RouterPath structures, each defining a segment of the swap route.
    /// @dev This function manages complex swap routes that might involve multiple hops through different liquidity pools or swapping protocols.
    /// It iterates through the provided `hops`, executing each segment of the route in sequence.
    function _exeHop(
        address payer,
        address receiver,
        bool isToNative,
        uint256 batchAmount,
        RouterPath[] calldata hops
    ) private {
        address fromToken = _bytes32ToAddress(hops[0].fromToken);
        bool toNext;
        bool noTransfer;
        // execute hop
        uint256 hopLength = hops.length;
        for (uint256 i = 0; i < hopLength; ) {
            if (i > 0) {
                fromToken = _bytes32ToAddress(hops[i].fromToken);
                batchAmount = IERC20(fromToken).universalBalanceOf(
                    address(this)
                );
                payer = address(this);
            }
            address to = address(this);
            if (i == hopLength - 1 && !isToNative) {
                to = receiver;
            } else if (i < hopLength - 1 && hops[i + 1].assetTo.length == 1) {
                to = hops[i + 1].assetTo[0];
                toNext = true;
            } else {
                toNext = false;
            }
            // 3.2 execute forks
            _exeForks(payer, to, batchAmount, hops[i], noTransfer);
            noTransfer = toNext;
            unchecked {
                ++i;
            }
        }
    }
    /// @notice Transfers tokens internally within the contract.
    /// @param payer The address of the payer.
    /// @param to The address of the receiver.
    /// @param token The address of the token to be transferred.
    /// @param amount The amount of tokens to be transferred.
    /// @dev Handles the transfer of ERC20 tokens or native tokens within the contract.
    function _transferInternal(
        address payer,
        address to,
        address token,
        uint256 amount
    ) private {
        if (payer == address(this)) {
            SafeERC20.safeTransfer(IERC20(token), to, amount);
        } else {
            IApproveProxy(_APPROVE_PROXY).claimTokens(token, payer, to, amount);
        }
    }
    /// @notice Transfers the specified token to the user.
    /// @param token The address of the token to be transferred.
    /// @param to The address of the receiver.
    /// @dev Handles the withdrawal of tokens to the user, converting WETH to ETH if necessary.
    function _transferTokenToUser(address token, address to) private {
        if ((IERC20(token).isETH())) {
            uint256 wethBal = IERC20(address(uint160(_WETH))).balanceOf(
                address(this)
            );
            if (wethBal > 0) {
                IWETH(address(uint160(_WETH))).transfer(
                    _WNATIVE_RELAY,
                    wethBal
                );
                IWNativeRelayer(_WNATIVE_RELAY).withdraw(wethBal);
            }
            if (to != address(this)) {
                uint256 ethBal = address(this).balance;
                if (ethBal > 0) {
                    (bool success, ) = payable(to).call{value: ethBal}("");
                    require(success, "transfer native token failed");
                }
            }
        } else {
            if (to != address(this)) {
                uint256 bal = IERC20(token).balanceOf(address(this));
                if (bal > 0) {
                    SafeERC20.safeTransfer(IERC20(token), to, bal);
                }
            }
        }
    }
    /// @notice Converts a uint256 value into an address.
    /// @param param The uint256 value to be converted.
    /// @return result The address obtained from the conversion.
    /// @dev This function is used to extract an address from a uint256,
    /// typically used when dealing with low-level data operations or when addresses are packed into larger data types.
    function _bytes32ToAddress(
        uint256 param
    ) private pure returns (address result) {
        assembly {
            result := and(param, _ADDRESS_MASK)
        }
    }
    /// @notice Executes a complex swap based on provided parameters and paths.
    /// @param baseRequest Basic swap details including tokens, amounts, and deadline.
    /// @param batchesAmount Amounts for each swap batch.
    /// @param batches Detailed swap paths for execution.
    /// @param payer Address providing the tokens.
    /// @param receiver Address receiving the swapped tokens.
    /// @return returnAmount Total received tokens from the swap.
    function _smartSwapInternal(
        BaseRequest memory baseRequest,
        uint256[] memory batchesAmount,
        RouterPath[][] calldata batches,
        address payer,
        address receiver
    ) private returns (uint256 returnAmount) {
        // 1. transfer from token in
        BaseRequest memory _baseRequest = baseRequest;
        require(
            _baseRequest.fromTokenAmount > 0,
            "Route: fromTokenAmount must be > 0"
        );
        address fromToken = _bytes32ToAddress(_baseRequest.fromToken);
        returnAmount = IERC20(_baseRequest.toToken).universalBalanceOf(
            receiver
        );
        // In order to deal with ETH/WETH transfer rules in a unified manner,
        // we do not need to judge according to fromToken.
        if (UniversalERC20.isETH(IERC20(fromToken))) {
            IWETH(address(uint160(_WETH))).deposit{
                value: _baseRequest.fromTokenAmount
            }();
            payer = address(this);
        }
        // 2. check total batch amount
        {
            // avoid stack too deep
            uint256 totalBatchAmount;
            for (uint256 i = 0; i < batchesAmount.length; ) {
                totalBatchAmount += batchesAmount[i];
                unchecked {
                    ++i;
                }
            }
            require(
                totalBatchAmount <= _baseRequest.fromTokenAmount,
                "Route: number of batches should be <= fromTokenAmount"
            );
        }
        // 4. execute batch
        // check length, fix DRW-02: LACK OF LENGTH CHECK ON BATATCHES
        require(batchesAmount.length == batches.length, "length mismatch");
        for (uint256 i = 0; i < batches.length; ) {
            // execute hop, if the whole swap replacing by pmm fails, the funds will return to dexRouter
            _exeHop(
                payer,
                receiver,
                IERC20(_baseRequest.toToken).isETH(),
                batchesAmount[i],
                batches[i]
            );
            unchecked {
                ++i;
            }
        }
        // 5. transfer tokens to user
        _transferTokenToUser(_baseRequest.toToken, receiver);
        // 6. check minReturnAmount
        returnAmount =
            IERC20(_baseRequest.toToken).universalBalanceOf(receiver) -
            returnAmount;
        require(
            returnAmount >= _baseRequest.minReturnAmount,
            "Min return not reached"
        );
        emit OrderRecord(
            fromToken,
            _baseRequest.toToken,
            tx.origin,
            _baseRequest.fromTokenAmount,
            returnAmount
        );
        return returnAmount;
    }
    //-------------------------------
    //------- Admin functions -------
    //-------------------------------
    /// @notice Updates the priority status of an address, allowing or disallowing it from performing certain actions.
    /// @param _priorityAddress The address whose priority status is to be updated.
    /// @param valid A boolean indicating whether the address should be marked as a priority (true) or not (false).
    /// @dev This function can only be called by the contract owner or another authorized entity.
    /// It is typically used to grant or revoke special permissions to certain addresses.
    function setPriorityAddress(address _priorityAddress, bool valid) external {
        require(msg.sender == admin || msg.sender == owner(), "na");
        priorityAddresses[_priorityAddress] = valid;
        emit PriorityAddressChanged(_priorityAddress, valid);
    }
    /// @notice Assigns a new admin address for the protocol.
    /// @param _newAdmin The address to be granted admin privileges.
    /// @dev Only the current owner or existing admin can assign a new admin, ensuring secure management of protocol permissions.
    /// Changing the admin address is a critical operation that should be performed with caution.
    function setProtocolAdmin(address _newAdmin) external {
        require(msg.sender == admin || msg.sender == owner(), "na");
        admin = _newAdmin;
        emit AdminChanged(_newAdmin);
    }
    //-------------------------------
    //------- Users Functions -------
    //-------------------------------
    /// @notice Executes a smart swap operation through the XBridge, identified by a specific order ID.
    /// @param orderId The unique identifier for the swap order, facilitating tracking and reference.
    /// @param baseRequest Contains essential parameters for the swap, such as source and destination tokens, amount, minimum return, and deadline.
    /// @param batchesAmount Array of amounts for each batch in the swap, allowing for split operations across different routes or pools.
    /// @param batches Detailed paths for each swap batch, including adapters and target assets.
    /// @param extraData Additional data required for executing the swap, which may include specific instructions or parameters for adapters.
    /// @return returnAmount The total amount of the destination token received from the swap.
    /// @dev This function allows for complex swap operations across different liquidity sources or protocols, initiated via the XBridge.
    /// It's designed to be called by authorized addresses, ensuring that the swap meets predefined criteria and security measures.
    function smartSwapByOrderIdByXBridge(
        uint256 orderId,
        BaseRequest calldata baseRequest,
        uint256[] calldata batchesAmount,
        RouterPath[][] calldata batches,
        PMMLib.PMMSwapRequest[] calldata extraData
    )
        external
        payable
        isExpired(baseRequest.deadLine)
        nonReentrant
        onlyPriorityAddress
        returns (uint256 returnAmount)
    {
        emit SwapOrderId(orderId);
        (address payer, address receiver) = IXBridge(msg.sender)
            .payerReceiver();
        require(receiver != address(0), "not address(0)");
        return
            _smartSwapTo(payer, receiver, baseRequest, batchesAmount, batches);
    }
    /// @notice Executes a token swap using Unxswap protocol via XBridge for a specific order ID.
    /// @param srcToken The source token's address to be swapped.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum acceptable return amount of destination tokens to ensure the swap is executed within acceptable slippage.
    /// @param pools Pool identifiers used for the swap, allowing for route optimization.
    /// @return returnAmount The amount of destination tokens received from the swap.
    /// @dev This function is designed to facilitate cross-protocol swaps through the XBridge,
    /// enabling swaps that adhere to specific routing paths defined by the pools parameter.
    /// It is accessible only to priority addresses, ensuring controlled access and execution.
    function unxswapByOrderIdByXBridge(
        uint256 srcToken,
        uint256 amount,
        uint256 minReturn,
        // solhint-disable-next-line no-unused-vars
        bytes32[] calldata pools
    ) external payable onlyPriorityAddress returns (uint256 returnAmount) {
        emit SwapOrderId((srcToken & _ORDER_ID_MASK) >> 160);
        (address payer, address receiver) = IXBridge(msg.sender)
            .payerReceiver();
        require(receiver != address(0), "not address(0)");
        return _unxswapTo(srcToken, amount, minReturn, payer, receiver, pools);
    }
    /// @notice Executes a token swap using the Uniswap V3 protocol through the XBridge, specifically catering to priority addresses.
    /// @param receiver The address that will receive the swap funds.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum acceptable amount of tokens to be received from the swap. This parameter ensures the swap does not proceed if the return is below the specified threshold, guarding against excessive slippage.
    /// @param pools An array of pool identifiers used to define the swap route in the Uniswap V3 pools.
    /// @return returnAmount The amount of tokens received from the swap.
    /// @dev This function is exclusively accessible to priority addresses and is responsible for executing swaps on Uniswap V3 through the XBridge interface. It ensures that the swap meets the criteria set by the parameters and utilizes the _uniswapV3Swap internal function to perform the actual swap.
    function uniswapV3SwapToByXBridge(
        uint256 receiver,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable onlyPriorityAddress returns (uint256 returnAmount) {
        emit SwapOrderId((receiver & _ORDER_ID_MASK) >> 160);
        (address payer, address receiver_) = IXBridge(msg.sender)
            .payerReceiver();
        require(receiver_ != address(0), "not address(0)");
        return
            _uniswapV3SwapTo(
                payer,
                uint160(receiver_),
                amount,
                minReturn,
                pools
            );
    }
    /// @notice Executes a smart swap based on the given order ID, supporting complex multi-path swaps.
    /// @param orderId The unique identifier for the swap order, facilitating tracking and reference.
    /// @param baseRequest Struct containing the base parameters for the swap, including the source and destination tokens, amount, minimum return, and deadline.
    /// @param batchesAmount An array specifying the amount to be swapped in each batch, allowing for split operations.
    /// @param batches An array of RouterPath structs defining the routing paths for each batch, enabling swaps through multiple protocols or liquidity pools.
    /// @param extraData Additional data required for some swaps, accommodating special instructions or parameters necessary for executing the swap.
    /// @return returnAmount The total amount of destination tokens received from executing the swap.
    /// @dev This function orchestrates a swap operation that may involve multiple steps, routes, or protocols based on the provided parameters.
    /// It's designed to ensure flexibility and efficiency in finding the best swap paths.
    function smartSwapByOrderId(
        uint256 orderId,
        BaseRequest calldata baseRequest,
        uint256[] calldata batchesAmount,
        RouterPath[][] calldata batches,
        PMMLib.PMMSwapRequest[] calldata extraData
    )
        external
        payable
        isExpired(baseRequest.deadLine)
        nonReentrant
        returns (uint256 returnAmount)
    {
        emit SwapOrderId(orderId);
        return
            _smartSwapTo(
                msg.sender,
                msg.sender,
                baseRequest,
                batchesAmount,
                batches
            );
    }
    /// @notice Executes a token swap using the Unxswap protocol based on a specified order ID.
    /// @param srcToken The source token involved in the swap.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum amount of tokens expected to be received to ensure the swap does not proceed under unfavorable conditions.
    /// @param pools An array of pool identifiers specifying the pools to use for the swap, allowing for optimized routing.
    /// @return returnAmount The amount of destination tokens received from the swap.
    /// @dev This function allows users to perform token swaps based on predefined orders, leveraging the Unxswap protocol's liquidity pools. It ensures that the swap meets the user's specified minimum return criteria, enhancing trade efficiency and security.
    function unxswapByOrderId(
        uint256 srcToken,
        uint256 amount,
        uint256 minReturn,
        // solhint-disable-next-line no-unused-vars
        bytes32[] calldata pools
    ) external payable returns (uint256 returnAmount) {
        emit SwapOrderId((srcToken & _ORDER_ID_MASK) >> 160);
        return
            _unxswapTo(
                srcToken,
                amount,
                minReturn,
                msg.sender,
                msg.sender,
                pools
            );
    }
    /// @notice Executes a swap tailored for investment purposes, adjusting swap amounts based on the contract's balance.
    /// @param baseRequest Struct containing essential swap parameters like source and destination tokens, amounts, and deadline.
    /// @param batchesAmount Array indicating how much of the source token to swap in each batch, facilitating diversified investments.
    /// @param batches Detailed routing information for executing the swap across different paths or protocols.
    /// @param extraData Additional data for swaps, supporting protocol-specific requirements.
    /// @param to The address where the swapped tokens will be sent, typically an investment contract or pool.
    /// @return returnAmount The total amount of destination tokens received, ready for investment.
    /// @dev This function is designed for scenarios where investments are made in batches or through complex paths to optimize returns. Adjustments are made based on the contract's current token balance to ensure precise allocation.
    function smartSwapByInvest(
        BaseRequest calldata baseRequest,
        uint256[] calldata batchesAmount,
        RouterPath[][] calldata batches,
        PMMLib.PMMSwapRequest[] calldata extraData,
        address to
    )
        external
        payable
        isExpired(baseRequest.deadLine)
        nonReentrant
        returns (uint256 returnAmount)
    {
        address fromToken = _bytes32ToAddress(baseRequest.fromToken);
        require(fromToken != _ETH, "Invalid source token");
        uint256 amount = IERC20(fromToken).balanceOf(address(this));
        BaseRequest memory newBaseRequest = BaseRequest({
            fromToken: baseRequest.fromToken,
            toToken: baseRequest.toToken,
            fromTokenAmount: amount,
            minReturnAmount: baseRequest.minReturnAmount,
            deadLine: baseRequest.deadLine
        });
        uint256[] memory newBatchesAmount = new uint256[](batchesAmount.length);
        for (uint256 i = 0; i < batchesAmount.length; ) {
            newBatchesAmount[i] =
                (batchesAmount[i] * amount) /
                baseRequest.fromTokenAmount;
            unchecked {
                ++i;
            }
        }
        returnAmount = _smartSwapInternal(
            newBaseRequest,
            newBatchesAmount,
            batches,
            address(this),
            to
        );
    }
    /// @notice Executes a Uniswap V3 swap after obtaining a permit, allowing the approval of token spending and swap execution in a single transaction.
    /// @param receiver The address that will receive the funds from the swap.
    /// @param srcToken The token that will be swapped.
    /// @param amount The amount of source tokens to be swapped.
    /// @param minReturn The minimum acceptable amount of tokens to receive from the swap, guarding against slippage.
    /// @param pools An array of Uniswap V3 pool identifiers, specifying the pools to be used for the swap.
    /// @param permit A signed permit message that allows the router to spend the source tokens without requiring a separate `approve` transaction.
    /// @return returnAmount The amount of tokens received from the swap.
    /// @dev This function first utilizes the `_permit` function to approve token spending, then proceeds to execute the swap through `_uniswapV3Swap`. It's designed to streamline transactions by combining token approval and swap execution into a single operation.
    function uniswapV3SwapToWithPermit(
        uint256 receiver,
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools,
        bytes calldata permit
    ) external returns (uint256 returnAmount) {
        emit SwapOrderId((receiver & _ORDER_ID_MASK) >> 160);
        _permit(address(srcToken), permit);
        return _uniswapV3SwapTo(msg.sender, receiver, amount, minReturn, pools);
    }
    /// @notice Executes a swap using the Uniswap V3 protocol.
    /// @param receiver The address that will receive the swap funds.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum acceptable amount of tokens to receive from the swap, guarding against excessive slippage.
    /// @param pools An array of pool identifiers used to define the swap route within Uniswap V3.
    /// @return returnAmount The amount of tokens received after the completion of the swap.
    /// @dev This function wraps and unwraps ETH as required, ensuring the transaction only accepts non-zero `msg.value` for ETH swaps. It invokes `_uniswapV3Swap` to execute the actual swap and handles commission post-swap.
    function uniswapV3SwapTo(
        uint256 receiver,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) external payable returns (uint256 returnAmount) {
        emit SwapOrderId((receiver & _ORDER_ID_MASK) >> 160);
        return _uniswapV3SwapTo(msg.sender, receiver, amount, minReturn, pools);
    }
    function _uniswapV3SwapTo(
        address payer,
        uint256 receiver,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) internal returns (uint256 returnAmount) {
        CommissionInfo memory commissionInfo = _getCommissionInfo();
        (
            address middleReceiver,
            uint256 balanceBefore
        ) = _doCommissionFromToken(
                commissionInfo,
                address(uint160(receiver)),
                amount
            );
        (uint256 swappedAmount, ) = _uniswapV3Swap(
            payer,
            payable(middleReceiver),
            amount,
            minReturn,
            pools
        );
        uint256 commissionAmount = _doCommissionToToken(
            commissionInfo,
            address(uint160(receiver)),
            balanceBefore
        );
        return swappedAmount - commissionAmount;
    }
    /// @notice Executes a smart swap directly to a specified receiver address.
    /// @param orderId Unique identifier for the swap order, facilitating tracking.
    /// @param receiver Address to receive the output tokens from the swap.
    /// @param baseRequest Contains essential parameters for the swap such as source and destination tokens, amounts, and deadline.
    /// @param batchesAmount Array indicating amounts for each batch in the swap, allowing for split operations.
    /// @param batches Detailed routing information for executing the swap across different paths or protocols.
    /// @param extraData Additional data required for certain swaps, accommodating specific protocol needs.
    /// @return returnAmount The total amount of destination tokens received from the swap.
    /// @dev This function enables users to perform token swaps with complex routing directly to a specified address,
    /// optimizing for best returns and accommodating specific trading strategies.
    function smartSwapTo(
        uint256 orderId,
        address receiver,
        BaseRequest calldata baseRequest,
        uint256[] calldata batchesAmount,
        RouterPath[][] calldata batches,
        PMMLib.PMMSwapRequest[] calldata extraData
    )
        external
        payable
        isExpired(baseRequest.deadLine)
        nonReentrant
        returns (uint256 returnAmount)
    {
        emit SwapOrderId(orderId);
        return
            _smartSwapTo(
                msg.sender,
                receiver,
                baseRequest,
                batchesAmount,
                batches
            );
    }
    function _smartSwapTo(
        address payer,
        address receiver,
        BaseRequest calldata baseRequest,
        uint256[] calldata batchesAmount,
        RouterPath[][] calldata batches
    ) internal returns (uint256) {
        require(receiver != address(0), "not addr(0)");
        CommissionInfo memory commissionInfo = _getCommissionInfo();
        (
            address middleReceiver,
            uint256 balanceBefore
        ) = _doCommissionFromToken(
                commissionInfo,
                receiver,
                baseRequest.fromTokenAmount
            );
        address _payer = payer; // avoid stack too deep
        uint256 swappedAmount = _smartSwapInternal(
            baseRequest,
            batchesAmount,
            batches,
            _payer,
            middleReceiver
        );
        uint256 commissionAmount = _doCommissionToToken(
            commissionInfo,
            receiver,
            balanceBefore
        );
        return swappedAmount - commissionAmount;
    }
    /// @notice Executes a token swap using the Unxswap protocol, sending the output directly to a specified receiver.
    /// @param srcToken The source token to be swapped.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum amount of destination tokens expected from the swap, ensuring the trade does not proceed under unfavorable conditions.
    /// @param receiver The address where the swapped tokens will be sent.
    /// @param pools An array of pool identifiers to specify the swap route, optimizing for best rates.
    /// @return returnAmount The total amount of destination tokens received from the swap.
    /// @dev This function facilitates direct swaps using Unxswap, allowing users to specify custom swap routes and ensuring that the output is sent to a predetermined address. It is designed for scenarios where the user wants to directly receive the tokens in their wallet or another contract.
    function unxswapTo(
        uint256 srcToken,
        uint256 amount,
        uint256 minReturn,
        address receiver,
        // solhint-disable-next-line no-unused-vars
        bytes32[] calldata pools
    ) external payable returns (uint256 returnAmount) {
        emit SwapOrderId((srcToken & _ORDER_ID_MASK) >> 160);
        return
            _unxswapTo(
                srcToken,
                amount,
                minReturn,
                msg.sender,
                receiver,
                pools
            );
    }
    function _unxswapTo(
        uint256 srcToken,
        uint256 amount,
        uint256 minReturn,
        address payer,
        address receiver,
        // solhint-disable-next-line no-unused-vars
        bytes32[] calldata pools
    ) internal returns (uint256 returnAmount) {
        require(receiver != address(0), "not addr(0)");
        CommissionInfo memory commissionInfo = _getCommissionInfo();
        (
            address middleReceiver,
            uint256 balanceBefore
        ) = _doCommissionFromToken(commissionInfo, receiver, amount);
        uint256 swappedAmount = _unxswapInternal(
            IERC20(address(uint160(srcToken & _ADDRESS_MASK))),
            amount,
            minReturn,
            pools,
            payer,
            middleReceiver
        );
        uint256 commissionAmount = _doCommissionToToken(
            commissionInfo,
            receiver,
            balanceBefore
        );
        return swappedAmount - commissionAmount;
    }
    /// @notice Allows the contract owner to withdraw any tokens or native currency considered as "dust".
    /// @param token The address of the token to withdraw, or the zero address for native currency.
    /// @param to The address where the dust tokens or native currency should be sent.
    /// @param amount The amount of the token or native currency to withdraw.
    /// @dev This function is intended for recovering small amounts of tokens or native currency
    /// left in the contract, which might not be recoverable through normal operations.
    /// It can only be executed by the contract owner to ensure control over the contract's assets.
    function withdrawDust(
        address token,
        address to,
        uint256 amount
    ) external onlyOwner {
        if (token == _ETH) {
            (bool success, bytes memory data) = payable(to).call{value: amount}(
                ""
            );
            require(success, string(data));
        } else {
            SafeERC20.safeTransfer(IERC20(token), to, amount);
        }
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IAdapter {
    function sellBase(
        address to,
        address pool,
        bytes memory data
    ) external;
    function sellQuote(
        address to,
        address pool,
        bytes memory data
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IApproveProxy {
    function isAllowedProxy(address _proxy) external view returns (bool);
    function claimTokens(
        address token,
        address who,
        address dest,
        uint256 amount
    ) external;
    function tokenApprove() external view returns (address);
    function addProxy(address) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Interface for DAI-style permits
interface IDaiLikePermit {
    function permit(
        address holder,
        address spender,
        uint256 nonce,
        uint256 expiry,
        bool allowed,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IERC20 {
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    event Transfer(address indexed from, address indexed to, uint256 value);
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint256);
    function balanceOf(address owner) external view returns (uint256);
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);
    function approve(address spender, uint256 value) external returns (bool);
    function transfer(address to, uint256 value) external returns (bool);
    function transferFrom(
        address from,
        address to,
        uint256 value
    ) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over `owner`'s tokens,
     * given `owner`'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);
    /**
     * @dev Returns the domain separator used in the encoding of the signature for `permit`, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IUni {
    function swapExactTokensForTokens(
        uint256 amountIn,
        uint256 amountOutMin,
        address[] calldata path,
        address to,
        uint256 deadline
    ) external returns (uint256[] memory amounts);
    function swap(
        uint256 amount0Out,
        uint256 amount1Out,
        address to,
        bytes calldata data
    ) external;
    function getReserves()
        external
        view
        returns (
            uint112 reserve0,
            uint112 reserve1,
            uint32 blockTimestampLast
        );
    function token0() external view returns (address);
    function token1() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IUniV3 {
    function swap(
        address recipient,
        bool zeroForOne,
        int256 amountSpecified,
        uint160 sqrtPriceLimitX96,
        bytes calldata data
    ) external returns (int256 amount0, int256 amount1);
    function slot0()
        external
        view
        returns (
            uint160 sqrtPriceX96,
            int24 tick,
            uint16 observationIndex,
            uint16 observationCardinality,
            uint16 observationCardinalityNext,
            uint8 feeProtocol,
            bool unlocked
        );
    function token0() external view returns (address);
    function token1() external view returns (address);
    /// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
    /// @return The fee
    function fee() external view returns (uint24);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IWETH {
    function totalSupply() external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);
    function approve(address spender, uint256 amount) external returns (bool);
    function transferFrom(
        address src,
        address dst,
        uint256 wad
    ) external returns (bool);
    function deposit() external payable;
    function withdraw(uint256 wad) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IWNativeRelayer {
    function withdraw(uint256 _amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
interface IXBridge {
    function payerReceiver() external view returns(address, address);
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            codehash := extcodehash(account)
        }
        return (codehash != accountHash && codehash != 0x0);
    }
    /**
     * @dev Converts an `address` into `address payable`. Note that this is
     * simply a type cast: the actual underlying value is not changed.
     *
     * _Available since v2.4.0._
     */
    function toPayable(address account)
        internal
        pure
        returns (address payable)
    {
        return payable(account);
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     *
     * _Available since v2.4.0._
     */
    function sendValue(address recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );
        // solhint-disable-next-line avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./CommonUtils.sol";
/// @title Base contract with common permit handling logics
abstract contract CommissionLib is CommonUtils {
    uint256 internal constant _COMMISSION_FEE_MASK =
        0x000000000000ffffffffffff0000000000000000000000000000000000000000;
    uint256 internal constant _COMMISSION_FLAG_MASK =
        0xffffffffffff0000000000000000000000000000000000000000000000000000;
    uint256 internal constant FROM_TOKEN_COMMISSION =
        0x3ca20afc2aaa0000000000000000000000000000000000000000000000000000;
    uint256 internal constant TO_TOKEN_COMMISSION =
        0x3ca20afc2bbb0000000000000000000000000000000000000000000000000000;
    event CommissionRecord(uint256 commissionAmount, address referrerAddress);
    // set default vaule. can change when need.
    uint256 public constant commissionRateLimit = 300;
    struct CommissionInfo {
        bool isFromTokenCommission;
        bool isToTokenCommission;
        uint256 commissionRate;
        address refererAddress;
        address token;
    }
    function _getCommissionInfo()
        internal
        pure
        returns (CommissionInfo memory commissionInfo)
    {
        assembly ("memory-safe") {
            let freePtr := mload(0x40)
            mstore(0x40, add(freePtr, 0xa0))
            let commissionData := calldataload(sub(calldatasize(), 0x20))
            mstore(
                commissionInfo,
                eq(
                    FROM_TOKEN_COMMISSION,
                    and(commissionData, _COMMISSION_FLAG_MASK)
                )
            ) // isFromTokenCommission
            mstore(
                add(0x20, commissionInfo),
                eq(
                    TO_TOKEN_COMMISSION,
                    and(commissionData, _COMMISSION_FLAG_MASK)
                )
            )
            mstore(
                add(0x40, commissionInfo),
                shr(160, and(commissionData, _COMMISSION_FEE_MASK))
            )
            mstore(
                add(0x60, commissionInfo),
                and(commissionData, _ADDRESS_MASK)
            )
            mstore(
                add(0x80, commissionInfo),
                and(calldataload(sub(calldatasize(), 0x40)), _ADDRESS_MASK)
            )
        }
    }
    function _getBalanceOf(
        address token,
        address user
    ) internal returns (uint256 amount) {
        assembly {
            function _revertWithReason(m, len) {
                mstore(
                    0,
                    0x08c379a000000000000000000000000000000000000000000000000000000000
                )
                mstore(
                    0x20,
                    0x0000002000000000000000000000000000000000000000000000000000000000
                )
                mstore(0x40, m)
                revert(0, len)
            }
            switch eq(token, _ETH)
            case 1 {
                amount := selfbalance()
            }
            default {
                let freePtr := mload(0x40)
                mstore(0x40, add(freePtr, 0x24))
                mstore(
                    freePtr,
                    0x70a0823100000000000000000000000000000000000000000000000000000000
                ) //balanceOf
                mstore(add(freePtr, 0x04), user)
                let success := staticcall(gas(), token, freePtr, 0x24, 0, 0x20)
                if eq(success, 0) {
                    _revertWithReason(
                        0x000000146765742062616c616e63654f66206661696c65640000000000000000,
                        0x58
                    )
                }
                amount := mload(0x00)
            }
        }
    }
    function _doCommissionFromToken(
        CommissionInfo memory commissionInfo,
        address receiver,
        uint256 inputAmount
    ) internal returns (address, uint256) {
        if (commissionInfo.isToTokenCommission) {
            return (
                address(this),
                _getBalanceOf(commissionInfo.token, address(this))
            );
        }
        if (!commissionInfo.isFromTokenCommission) {
            return (receiver, 0);
        }
        assembly ("memory-safe") {
            function _revertWithReason(m, len) {
                mstore(
                    0,
                    0x08c379a000000000000000000000000000000000000000000000000000000000
                )
                mstore(
                    0x20,
                    0x0000002000000000000000000000000000000000000000000000000000000000
                )
                mstore(0x40, m)
                revert(0, len)
            }
            let rate := mload(add(commissionInfo, 0x40))
            if gt(rate, commissionRateLimit) {
                _revertWithReason(
                    0x0000001b6572726f7220636f6d6d697373696f6e2072617465206c696d697400,
                    0x5f
                ) //"error commission rate limit"
            }
            let token := mload(add(commissionInfo, 0x80))
            let referer := mload(add(commissionInfo, 0x60))
            let amount := div(mul(inputAmount, rate), sub(10000, rate))
            switch eq(token, _ETH)
            case 1 {
                let success := call(gas(), referer, amount, 0, 0, 0, 0)
                if eq(success, 0) {
                    _revertWithReason(
                        0x0000001b636f6d6d697373696f6e2077697468206574686572206572726f7200,
                        0x5f
                    )
                }
            }
            default {
                let freePtr := mload(0x40)
                mstore(0x40, add(freePtr, 0x84))
                mstore(
                    freePtr,
                    0x0a5ea46600000000000000000000000000000000000000000000000000000000
                ) // claimTokens
                mstore(add(freePtr, 0x04), token)
                mstore(add(freePtr, 0x24), caller())
                mstore(add(freePtr, 0x44), referer)
                mstore(add(freePtr, 0x64), amount)
                let success := call(
                    gas(),
                    _APPROVE_PROXY,
                    0,
                    freePtr,
                    0x84,
                    0,
                    0
                )
                if eq(success, 0) {
                    _revertWithReason(
                        0x00000013636c61696d20746f6b656e73206661696c6564000000000000000000,
                        0x57
                    )
                }
            }
            let freePtr := mload(0x40)
            mstore(0x40, add(freePtr, 0x40))
            mstore(freePtr, amount)
            mstore(add(freePtr, 0x20), referer)
            log1(
                freePtr,
                0x40,
                0xffc60ee157a42f4d8edbd1897e6581a96d9ed04e44fb2ab53a47ce1eb8f2775b
            ) //emit CommissionRecord(commissionAmount, refererAddress);
        }
        return (receiver, 0);
    }
    function _doCommissionToToken(
        CommissionInfo memory commissionInfo,
        address receiver,
        uint256 balanceBefore
    ) internal returns (uint256 amount) {
        if (!commissionInfo.isToTokenCommission) {
            return 0;
        }
        assembly ("memory-safe") {
            function _revertWithReason(m, len) {
                mstore(
                    0,
                    0x08c379a000000000000000000000000000000000000000000000000000000000
                )
                mstore(
                    0x20,
                    0x0000002000000000000000000000000000000000000000000000000000000000
                )
                mstore(0x40, m)
                revert(0, len)
            }
            let rate := mload(add(commissionInfo, 0x40))
            if gt(rate, commissionRateLimit) {
                _revertWithReason(
                    0x0000001b6572726f7220636f6d6d697373696f6e2072617465206c696d697400,
                    0x5f
                ) //"error commission rate limit"
            }
            let token := mload(add(commissionInfo, 0x80))
            let referer := mload(add(commissionInfo, 0x60))
            switch eq(token, _ETH)
            case 1 {
                if lt(selfbalance(), balanceBefore) {
                    _revertWithReason(
                        0x0000000a737562206661696c65640000000000000000000000000000000000000,
                        0x4d
                    ) // sub failed
                }
                let inputAmount := sub(selfbalance(), balanceBefore)
                amount := div(mul(inputAmount, rate), 10000)
                let success := call(gas(), referer, amount, 0, 0, 0, 0)
                if eq(success, 0) {
                    _revertWithReason(
                        0x000000197472616e73666572206574682072656665726572206661696c000000,
                        0x5d
                    ) // transfer eth referer fail
                }
                success := call(
                    gas(),
                    receiver,
                    sub(inputAmount, amount),
                    0,
                    0,
                    0,
                    0
                )
                if eq(success, 0) {
                    _revertWithReason(
                        0x0000001a7472616e7366657220657468207265636569766572206661696c0000,
                        0x5e
                    ) // transfer eth receiver fail
                }
            }
            default {
                let freePtr := mload(0x40)
                mstore(0x40, add(freePtr, 0x48))
                mstore(
                    freePtr,
                    0xa9059cbba9059cbb70a082310000000000000000000000000000000000000000
                ) // transfer transfer balanceOf
                mstore(add(freePtr, 0x0c), address())
                let success := staticcall(
                    gas(),
                    token,
                    add(freePtr, 8),
                    36,
                    0,
                    0x20
                )
                if eq(success, 0) {
                    _revertWithReason(
                        0x000000146765742062616c616e63654f66206661696c65640000000000000000,
                        0x58
                    )
                }
                let balanceAfter := mload(0x00)
                if lt(balanceAfter, balanceBefore) {
                    _revertWithReason(
                        0x0000000a737562206661696c65640000000000000000000000000000000000000,
                        0x4d
                    ) // sub failed
                }
                let inputAmount := sub(balanceAfter, balanceBefore)
                amount := div(mul(inputAmount, rate), 10000)
                mstore(add(freePtr, 0x08), referer)
                mstore(add(freePtr, 0x28), amount)
                success := call(gas(), token, 0, add(freePtr, 4), 0x44, 0, 0)
                if eq(success, 0) {
                    _revertWithReason(
                        0x0000001b7472616e7366657220746f6b656e2072656665726572206661696c00,
                        0x5f
                    ) //transfer token referer fail
                }
                mstore(add(freePtr, 0x04), receiver)
                mstore(add(freePtr, 0x24), sub(inputAmount, amount))
                success := call(gas(), token, 0, freePtr, 0x44, 0, 0)
                if eq(success, 0) {
                    _revertWithReason(
                        0x0000001c7472616e7366657220746f6b656e207265636569766572206661696c,
                        0x60
                    ) //transfer token receiver fail
                }
            }
            let freePtr := mload(0x40)
            mstore(0x40, add(freePtr, 0x40))
            mstore(freePtr, amount)
            mstore(add(freePtr, 0x20), referer)
            log1(
                freePtr,
                0x40,
                0xffc60ee157a42f4d8edbd1897e6581a96d9ed04e44fb2ab53a47ce1eb8f2775b
            ) //emit CommissionRecord(commissionAmount, refererAddress);
        }
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Base contract with common permit handling logics
abstract contract CommonUtils {
  address internal constant _ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
  uint256 internal constant _ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
  uint256 internal constant _REVERSE_MASK = 0x8000000000000000000000000000000000000000000000000000000000000000;
  uint256 internal constant _ORDER_ID_MASK = 0xffffffffffffffffffffffff0000000000000000000000000000000000000000;
  uint256 internal constant _WEIGHT_MASK = 0x00000000000000000000ffff0000000000000000000000000000000000000000;
  uint256 internal constant _CALL_GAS_LIMIT = 5000;
  /// @dev WETH address is network-specific and needs to be changed before deployment.
  /// It can not be moved to immutable as immutables are not supported in assembly
  // ETH:     C02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2
  // BSC:     bb4CdB9CBd36B01bD1cBaEBF2De08d9173bc095c
  // OEC:     8f8526dbfd6e38e3d8307702ca8469bae6c56c15
  // LOCAL:   5FbDB2315678afecb367f032d93F642f64180aa3
  // LOCAL2:  02121128f1Ed0AdA5Df3a87f42752fcE4Ad63e59
  // POLYGON: 0d500B1d8E8eF31E21C99d1Db9A6444d3ADf1270
  // AVAX:    B31f66AA3C1e785363F0875A1B74E27b85FD66c7
  // FTM:     21be370D5312f44cB42ce377BC9b8a0cEF1A4C83
  // ARB:     82aF49447D8a07e3bd95BD0d56f35241523fBab1
  // OP:      4200000000000000000000000000000000000006
  // CRO:     5C7F8A570d578ED84E63fdFA7b1eE72dEae1AE23
  // CFX:     14b2D3bC65e74DAE1030EAFd8ac30c533c976A9b
  // POLYZK   4F9A0e7FD2Bf6067db6994CF12E4495Df938E6e9
  address public constant _WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
  // address public constant _WETH = 0x5FbDB2315678afecb367f032d93F642f64180aa3;    // hardhat1
  // address public constant _WETH = 0x707531c9999AaeF9232C8FEfBA31FBa4cB78d84a;    // hardhat2
  // ETH:     70cBb871E8f30Fc8Ce23609E9E0Ea87B6b222F58
  // ETH-DEV：02D0131E5Cc86766e234EbF1eBe33444443b98a3
  // BSC:     d99cAE3FAC551f6b6Ba7B9f19bDD316951eeEE98
  // OEC:     E9BBD6eC0c9Ca71d3DcCD1282EE9de4F811E50aF
  // LOCAL:   e7f1725E7734CE288F8367e1Bb143E90bb3F0512
  // LOCAL2:  95D7fF1684a8F2e202097F28Dc2e56F773A55D02
  // POLYGON: 40aA958dd87FC8305b97f2BA922CDdCa374bcD7f
  // AVAX:    70cBb871E8f30Fc8Ce23609E9E0Ea87B6b222F58
  // FTM:     E9BBD6eC0c9Ca71d3DcCD1282EE9de4F811E50aF
  // ARB:     E9BBD6eC0c9Ca71d3DcCD1282EE9de4F811E50aF
  // OP:      100F3f74125C8c724C7C0eE81E4dd5626830dD9a
  // CRO:     E9BBD6eC0c9Ca71d3DcCD1282EE9de4F811E50aF
  // CFX:     100F3f74125C8c724C7C0eE81E4dd5626830dD9a
  // POLYZK   1b5d39419C268b76Db06DE49e38B010fbFB5e226
  address public constant _APPROVE_PROXY = 0x70cBb871E8f30Fc8Ce23609E9E0Ea87B6b222F58;
  // address public constant _APPROVE_PROXY = 0xe7f1725E7734CE288F8367e1Bb143E90bb3F0512;    // hardhat1
  // address public constant _APPROVE_PROXY = 0x2538a10b7fFb1B78c890c870FC152b10be121f04;    // hardhat2
  // ETH:     5703B683c7F928b721CA95Da988d73a3299d4757
  // BSC:     0B5f474ad0e3f7ef629BD10dbf9e4a8Fd60d9A48
  // OEC:     d99cAE3FAC551f6b6Ba7B9f19bDD316951eeEE98
  // LOCAL:   D49a0e9A4CD5979aE36840f542D2d7f02C4817Be
  // LOCAL2:  11457D5b1025D162F3d9B7dBeab6E1fBca20e043
  // POLYGON: f332761c673b59B21fF6dfa8adA44d78c12dEF09
  // AVAX:    3B86917369B83a6892f553609F3c2F439C184e31
  // FTM:     40aA958dd87FC8305b97f2BA922CDdCa374bcD7f
  // ARB:     d99cAE3FAC551f6b6Ba7B9f19bDD316951eeEE98
  // OP:      40aA958dd87FC8305b97f2BA922CDdCa374bcD7f
  // CRO:     40aA958dd87FC8305b97f2BA922CDdCa374bcD7f
  // CFX:     40aA958dd87FC8305b97f2BA922CDdCa374bcD7f
  // POLYZK   d2F0aC2012C8433F235c8e5e97F2368197DD06C7
  address public constant _WNATIVE_RELAY = 0x5703B683c7F928b721CA95Da988d73a3299d4757;
  // address public constant _WNATIVE_RELAY = 0x0B306BF915C4d645ff596e518fAf3F9669b97016;   // hardhat1
  // address public constant _WNATIVE_RELAY = 0x6A47346e722937B60Df7a1149168c0E76DD6520f;   // hardhat2
  event OrderRecord(address fromToken, address toToken, address sender, uint256 fromAmount, uint256 returnAmount);
  event SwapOrderId(uint256 id);
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Base contract with common payable logics
abstract contract EthReceiver {
  receive() external payable {
    // solhint-disable-next-line avoid-tx-origin
    require(msg.sender != tx.origin, "ETH deposit rejected");
  }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../interfaces/IERC20Permit.sol";
import "../interfaces/IDaiLikePermit.sol";
import "./RevertReasonParser.sol";
/// @title Base contract with common permit handling logics
abstract contract Permitable {
  function _permit(address token, bytes calldata permit) internal {
    if (permit.length > 0) {
      bool success;
      bytes memory result;
      if (permit.length == 32 * 7) {
        // solhint-disable-next-line avoid-low-level-calls
        (success, result) = token.call(abi.encodePacked(IERC20Permit.permit.selector, permit));
      } else if (permit.length == 32 * 8) {
        // solhint-disable-next-line avoid-low-level-calls
        (success, result) = token.call(abi.encodePacked(IDaiLikePermit.permit.selector, permit));
      } else {
        revert("Wrong permit length");
      }
      if (!success) {
        revert(RevertReasonParser.parse(result, "Permit failed: "));
      }
    }
  }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library PMMLib {
  // ============ Struct ============
  struct PMMSwapRequest {
      uint256 pathIndex;
      address payer;
      address fromToken;
      address toToken;
      uint256 fromTokenAmountMax;
      uint256 toTokenAmountMax;
      uint256 salt;
      uint256 deadLine;
      bool isPushOrder;
      bytes extension;
      // address marketMaker;
      // uint256 subIndex;
      // bytes signature;
      // uint256 source;  1byte type + 1byte bool（reverse） + 0...0 + 20 bytes address
  }
  struct PMMBaseRequest {
    uint256 fromTokenAmount;
    uint256 minReturnAmount;
    uint256 deadLine;
    bool fromNative;
    bool toNative;
  }
  enum PMM_ERROR {
      NO_ERROR,
      INVALID_OPERATOR,
      QUOTE_EXPIRED,
      ORDER_CANCELLED_OR_FINALIZED,
      REMAINING_AMOUNT_NOT_ENOUGH,
      INVALID_AMOUNT_REQUEST,
      FROM_TOKEN_PAYER_ERROR,
      TO_TOKEN_PAYER_ERROR,
      WRONG_FROM_TOKEN
  }
  event PMMSwap(
    uint256 pathIndex,
    uint256 subIndex,
    uint256 errorCode
  );
  error PMMErrorCode(uint256 errorCode);
}/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library RevertReasonForwarder {
    function reRevert() internal pure {
        // bubble up revert reason from latest external call
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let ptr := mload(0x40)
            returndatacopy(ptr, 0, returndatasize())
            revert(ptr, returndatasize())
        }
    }
}// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title Library that allows to parse unsuccessful arbitrary calls revert reasons.
/// See https://solidity.readthedocs.io/en/latest/control-structures.html#revert for details.
/// Note that we assume revert reason being abi-encoded as Error(string) so it may fail to parse reason
/// if structured reverts appear in the future.
///
/// All unsuccessful parsings get encoded as Unknown(data) string
library RevertReasonParser {
    bytes4 private constant _PANIC_SELECTOR =
        bytes4(keccak256("Panic(uint256)"));
    bytes4 private constant _ERROR_SELECTOR =
        bytes4(keccak256("Error(string)"));
    function parse(bytes memory data, string memory prefix)
        internal
        pure
        returns (string memory)
    {
        if (data.length >= 4) {
            bytes4 selector;
            assembly {
                // solhint-disable-line no-inline-assembly
                selector := mload(add(data, 0x20))
            }
            // 68 = 4-byte selector + 32 bytes offset + 32 bytes length
            if (selector == _ERROR_SELECTOR && data.length >= 68) {
                uint256 offset;
                bytes memory reason;
                // solhint-disable no-inline-assembly
                assembly {
                    // 36 = 32 bytes data length + 4-byte selector
                    offset := mload(add(data, 36))
                    reason := add(data, add(36, offset))
                }
                /*
                    revert reason is padded up to 32 bytes with ABI encoder: Error(string)
                    also sometimes there is extra 32 bytes of zeros padded in the end:
                    https://github.com/ethereum/solidity/issues/10170
                    because of that we can't check for equality and instead check
                    that offset + string length + extra 36 bytes is less than overall data length
                */
                require(
                    data.length >= 36 + offset + reason.length,
                    "Invalid revert reason"
                );
                return string(abi.encodePacked(prefix, "Error(", reason, ")"));
            }
            // 36 = 4-byte selector + 32 bytes integer
            else if (selector == _PANIC_SELECTOR && data.length == 36) {
                uint256 code;
                // solhint-disable no-inline-assembly
                assembly {
                    // 36 = 32 bytes data length + 4-byte selector
                    code := mload(add(data, 36))
                }
                return
                    string(
                        abi.encodePacked(prefix, "Panic(", _toHex(code), ")")
                    );
            }
        }
        return string(abi.encodePacked(prefix, "Unknown(", _toHex(data), ")"));
    }
    function _toHex(uint256 value) private pure returns (string memory) {
        return _toHex(abi.encodePacked(value));
    }
    function _toHex(bytes memory data) private pure returns (string memory) {
        bytes16 alphabet = 0x30313233343536373839616263646566;
        bytes memory str = new bytes(2 + data.length * 2);
        str[0] = "0";
        str[1] = "x";
        for (uint256 i = 0; i < data.length; i++) {
            str[2 * i + 2] = alphabet[uint8(data[i] >> 4)];
            str[2 * i + 3] = alphabet[uint8(data[i] & 0x0f)];
        }
        return string(str);
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
library RouterErrors {
    error ReturnAmountIsNotEnough();
    error InvalidMsgValue();
    error ERC20TransferFailed();
    error EmptyPools();
    error InvalidFromToken();
    error MsgValuedNotRequired();
}/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }
    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }
    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }
    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }
    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }
    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }
    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }
    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }
    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }
    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }
    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }
    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }
    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }
    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }
    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }
    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }
    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }
    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }
    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }
    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }
    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }
    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }
    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }
    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }
    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }
    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }
    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }
    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }
    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }
    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }
    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }
    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }
    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248) {
        require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
        return int248(value);
    }
    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240) {
        require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
        return int240(value);
    }
    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232) {
        require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
        return int232(value);
    }
    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224) {
        require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
        return int224(value);
    }
    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216) {
        require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
        return int216(value);
    }
    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208) {
        require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
        return int208(value);
    }
    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200) {
        require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
        return int200(value);
    }
    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192) {
        require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
        return int192(value);
    }
    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184) {
        require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
        return int184(value);
    }
    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176) {
        require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
        return int176(value);
    }
    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168) {
        require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
        return int168(value);
    }
    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160) {
        require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
        return int160(value);
    }
    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152) {
        require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
        return int152(value);
    }
    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144) {
        require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
        return int144(value);
    }
    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136) {
        require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
        return int136(value);
    }
    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128) {
        require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
        return int128(value);
    }
    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120) {
        require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
        return int120(value);
    }
    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112) {
        require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
        return int112(value);
    }
    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104) {
        require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
        return int104(value);
    }
    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96) {
        require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
        return int96(value);
    }
    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88) {
        require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
        return int88(value);
    }
    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80) {
        require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
        return int80(value);
    }
    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72) {
        require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
        return int72(value);
    }
    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64) {
        require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
        return int64(value);
    }
    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56) {
        require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
        return int56(value);
    }
    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48) {
        require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
        return int48(value);
    }
    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40) {
        require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
        return int40(value);
    }
    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32) {
        require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
        return int32(value);
    }
    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24) {
        require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
        return int24(value);
    }
    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16) {
        require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
        return int16(value);
    }
    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8) {
        require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
        return int8(value);
    }
    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./SafeMath.sol";
import "./Address.sol";
import "./RevertReasonForwarder.sol";
import "../interfaces/IERC20.sol";
import "../interfaces/IERC20Permit.sol";
import "../interfaces/IDaiLikePermit.sol";
// File @1inch/solidity-utils/contracts/libraries/[email protected]
library SafeERC20 {
    error SafeTransferFailed();
    error SafeTransferFromFailed();
    error ForceApproveFailed();
    error SafeIncreaseAllowanceFailed();
    error SafeDecreaseAllowanceFailed();
    error SafePermitBadLength();
    // Ensures method do not revert or return boolean `true`, admits call to non-smart-contract
    function safeTransferFrom(IERC20 token, address from, address to, uint256 amount) internal {
        bytes4 selector = token.transferFrom.selector;
        bool success;
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), from)
            mstore(add(data, 0x24), to)
            mstore(add(data, 0x44), amount)
            success := call(gas(), token, 0, data, 100, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
        if (!success) revert SafeTransferFromFailed();
    }
    // Ensures method do not revert or return boolean `true`, admits call to non-smart-contract
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        if (!_makeCall(token, token.transfer.selector, to, value)) {
            revert SafeTransferFailed();
        }
    }
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        forceApprove(token, spender, value);
    }
    // If `approve(from, to, amount)` fails, try to `approve(from, to, 0)` before retry
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        if (!_makeCall(token, token.approve.selector, spender, value)) {
            if (!_makeCall(token, token.approve.selector, spender, 0) ||
                !_makeCall(token, token.approve.selector, spender, value))
            {
                revert ForceApproveFailed();
            }
        }
    }
    
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > type(uint256).max - allowance) revert SafeIncreaseAllowanceFailed();
        forceApprove(token, spender, allowance + value);
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 allowance = token.allowance(address(this), spender);
        if (value > allowance) revert SafeDecreaseAllowanceFailed();
        forceApprove(token, spender, allowance - value);
    }
    function safePermit(IERC20 token, bytes calldata permit) internal {
        bool success;
        if (permit.length == 32 * 7) {
            success = _makeCalldataCall(token, IERC20Permit.permit.selector, permit);
        } else if (permit.length == 32 * 8) {
            success = _makeCalldataCall(token, IDaiLikePermit.permit.selector, permit);
        } else {
            revert SafePermitBadLength();
        }
        if (!success) RevertReasonForwarder.reRevert();
    }
    function _makeCall(IERC20 token, bytes4 selector, address to, uint256 amount) private returns(bool success) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let data := mload(0x40)
            mstore(data, selector)
            mstore(add(data, 0x04), to)
            mstore(add(data, 0x24), amount)
            success := call(gas(), token, 0, data, 0x44, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
    }
    function _makeCalldataCall(IERC20 token, bytes4 selector, bytes calldata args) private returns(bool success) {
        /// @solidity memory-safe-assembly
        assembly { // solhint-disable-line no-inline-assembly
            let len := add(4, args.length)
            let data := mload(0x40)
            mstore(data, selector)
            calldatacopy(add(data, 0x04), args.offset, args.length)
            success := call(gas(), token, 0, data, len, 0x0, 0x20)
            if success {
                switch returndatasize()
                case 0 { success := gt(extcodesize(token), 0) }
                default { success := and(gt(returndatasize(), 31), eq(mload(0), 1)) }
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library SafeMath {
    uint256 constant WAD = 10**18;
    uint256 constant RAY = 10**27;
    function wad() public pure returns (uint256) {
        return WAD;
    }
    function ray() public pure returns (uint256) {
        return RAY;
    }
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;
        return c;
    }
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold
        return c;
    }
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a <= b ? a : b;
    }
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }
    function sqrt(uint256 a) internal pure returns (uint256 b) {
        if (a > 3) {
            b = a;
            uint256 x = a / 2 + 1;
            while (x < b) {
                b = x;
                x = (a / x + x) / 2;
            }
        } else if (a != 0) {
            b = 1;
        }
    }
    function wmul(uint256 a, uint256 b) internal pure returns (uint256) {
        return mul(a, b) / WAD;
    }
    function wmulRound(uint256 a, uint256 b) internal pure returns (uint256) {
        return add(mul(a, b), WAD / 2) / WAD;
    }
    function rmul(uint256 a, uint256 b) internal pure returns (uint256) {
        return mul(a, b) / RAY;
    }
    function rmulRound(uint256 a, uint256 b) internal pure returns (uint256) {
        return add(mul(a, b), RAY / 2) / RAY;
    }
    function wdiv(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(mul(a, WAD), b);
    }
    function wdivRound(uint256 a, uint256 b) internal pure returns (uint256) {
        return add(mul(a, WAD), b / 2) / b;
    }
    function rdiv(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(mul(a, RAY), b);
    }
    function rdivRound(uint256 a, uint256 b) internal pure returns (uint256) {
        return add(mul(a, RAY), b / 2) / b;
    }
    function wpow(uint256 x, uint256 n) internal pure returns (uint256) {
        uint256 result = WAD;
        while (n > 0) {
            if (n % 2 != 0) {
                result = wmul(result, x);
            }
            x = wmul(x, x);
            n /= 2;
        }
        return result;
    }
    function rpow(uint256 x, uint256 n) internal pure returns (uint256) {
        uint256 result = RAY;
        while (n > 0) {
            if (n % 2 != 0) {
                result = rmul(result, x);
            }
            x = rmul(x, x);
            n /= 2;
        }
        return result;
    }
    function divCeil(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 quotient = div(a, b);
        uint256 remainder = a - quotient * b;
        if (remainder > 0) {
            return quotient + 1;
        } else {
            return quotient;
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import {SafeMath} from "./SafeMath.sol";
import {IERC20} from "../interfaces/IERC20.sol";
import {SafeERC20} from "./SafeERC20.sol";
library UniversalERC20 {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;
    IERC20 private constant ETH_ADDRESS =
        IERC20(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE);
    function universalTransfer(
        IERC20 token,
        address payable to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            if (isETH(token)) {
                to.transfer(amount);
            } else {
                token.safeTransfer(to, amount);
            }
        }
    }
    function universalTransferFrom(
        IERC20 token,
        address from,
        address payable to,
        uint256 amount
    ) internal {
        if (amount > 0) {
            token.safeTransferFrom(from, to, amount);
        }
    }
    function universalApproveMax(
        IERC20 token,
        address to,
        uint256 amount
    ) internal {
        uint256 allowance = token.allowance(address(this), to);
        if (allowance < amount) {
            token.forceApprove(to, type(uint256).max);
        }
    }
    function universalBalanceOf(IERC20 token, address who)
        internal
        view
        returns (uint256)
    {
        if (isETH(token)) {
            return who.balance;
        } else {
            return token.balanceOf(who);
        }
    }
    function tokenBalanceOf(IERC20 token, address who)
        internal
        view
        returns (uint256)
    {
        return token.balanceOf(who);
    }
    function isETH(IERC20 token) internal pure returns (bool) {
        return token == ETH_ADDRESS;
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../libraries/CommonUtils.sol";
import "../libraries/SafeERC20.sol";
import "../interfaces/IWETH.sol";
import "../interfaces/IWNativeRelayer.sol";
import "../interfaces/IERC20.sol";
import "../interfaces/IApproveProxy.sol";
/// @title Base contract with common payable logics
abstract contract WrapETHSwap is CommonUtils {
  uint256 private constant SWAP_AMOUNT = 0x00000000000000000000000000000000ffffffffffffffffffffffffffffffff;
  
  function swapWrap(uint256 orderId, uint256 rawdata) external payable {
    bool reversed;
    uint128 amount;
    assembly {
      reversed := and(rawdata, _REVERSE_MASK)
      amount := and(rawdata, SWAP_AMOUNT)
    }
    require(amount > 0, "amount must be > 0");
    if (reversed) {
      IApproveProxy(_APPROVE_PROXY).claimTokens(_WETH, msg.sender, _WNATIVE_RELAY, amount);
      IWNativeRelayer(_WNATIVE_RELAY).withdraw(amount);
      (bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
      require(success, "transfer native token failed");
    } else {
      require(msg.value == amount, "value not equal amount");
      IWETH(_WETH).deposit{value: amount}();
      SafeERC20.safeTransfer(IERC20(_WETH), msg.sender, amount);
    }
    emit SwapOrderId(orderId);
    emit OrderRecord(reversed ? _WETH : _ETH, reversed ? _ETH: _WETH, msg.sender, amount, amount);
  }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract DexRouterStorage {
    // In the test scenario, we take it as a settable state and adjust it to a constant after it stabilizes
    address public approveProxy;
    address public wNativeRelayer;
    mapping(address => bool) public priorityAddresses;
    uint256[19] internal _dexRouterGap;
    address public admin;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./interfaces/IUni.sol";
import "./libraries/UniversalERC20.sol";
import "./libraries/CommonUtils.sol";
contract UnxswapRouter is CommonUtils {
    uint256 private constant _IS_TOKEN0_TAX =
        0x1000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _IS_TOKEN1_TAX =
        0x2000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _CLAIM_TOKENS_CALL_SELECTOR_32 =
        0x0a5ea46600000000000000000000000000000000000000000000000000000000;
    uint256 private constant _TRANSFER_DEPOSIT_SELECTOR =
        0xa9059cbbd0e30db0000000000000000000000000000000000000000000000000;
    uint256 private constant _SWAP_GETRESERVES_SELECTOR =
        0x022c0d9f0902f1ac000000000000000000000000000000000000000000000000;
    uint256 private constant _WITHDRAW_TRNASFER_SELECTOR =
        0x2e1a7d4da9059cbb000000000000000000000000000000000000000000000000;
    uint256 private constant _BALANCEOF_TOKEN0_SELECTOR =
        0x70a082310dfe1681000000000000000000000000000000000000000000000000;
    uint256 private constant _BALANCEOF_TOKEN1_SELECTOR =
        0x70a08231d21220a7000000000000000000000000000000000000000000000000;
    uint256 private constant _WETH_MASK =
        0x4000000000000000000000000000000000000000000000000000000000000000;
    uint256 private constant _NUMERATOR_MASK =
        0x0000000000000000ffffffff0000000000000000000000000000000000000000;
    uint256 private constant _DENOMINATOR = 1_000_000_000;
    uint256 private constant _NUMERATOR_OFFSET = 160;
    uint256 private constant ETH_ADDRESS = 0x00;
    //-------------------------------
    //------- Internal Functions ----
    //-------------------------------
    /// @notice Performs the internal logic for executing a swap using the Unxswap protocol.
    /// @param srcToken The token to be swapped.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum amount of tokens that must be received for the swap to be valid, protecting against slippage.
    /// @param pools The array of pool identifiers that define the swap route.
    /// @param payer The address of the entity providing the source tokens for the swap.
    /// @param receiver The address that will receive the tokens after the swap.
    /// @return returnAmount The amount of tokens received from the swap.
    /// @dev This internal function encapsulates the core logic of the Unxswap token swap process. It is meant to be called by other external functions that set up the required parameters. The actual interaction with the Unxswap pools and the token transfer mechanics are implemented here.
    function _unxswapInternal(
        IERC20 srcToken,
        uint256 amount,
        uint256 minReturn,
        // solhint-disable-next-line no-unused-vars
        bytes32[] calldata pools,
        address payer,
        address receiver
    ) internal returns (uint256 returnAmount) {
        assembly {
            // solhint-disable-line no-inline-assembly
            function revertWithReason(m, len) {
                mstore(
                    0,
                    0x08c379a000000000000000000000000000000000000000000000000000000000
                )
                mstore(
                    0x20,
                    0x0000002000000000000000000000000000000000000000000000000000000000
                )
                mstore(0x40, m)
                revert(0, len)
            }
            function _getTokenAddr(emptyPtr, pair, selector) -> token {
                mstore(emptyPtr, selector)
                if iszero(
                    staticcall(
                        gas(),
                        pair,
                        add(0x04, emptyPtr),
                        0x04,
                        0x00,
                        0x20
                    )
                ) {
                    revertWithReason(
                        0x0000001067657420746f6b656e206661696c6564000000000000000000000000,
                        0x54
                    ) // "get token failed"
                }
                token := mload(0x00)
            }
            function _getBalanceOfToken0(emptyPtr, pair) -> token0, balance0 {
                mstore(emptyPtr, _BALANCEOF_TOKEN0_SELECTOR)
                if iszero(
                    staticcall(
                        gas(),
                        pair,
                        add(0x04, emptyPtr),
                        0x04,
                        0x00,
                        0x20
                    )
                ) {
                    revertWithReason(
                        0x00000012746f6b656e302063616c6c206661696c656400000000000000000000,
                        0x56
                    ) // "token0 call failed"
                }
                token0 := mload(0x00)
                mstore(add(0x04, emptyPtr), pair)
                if iszero(
                    staticcall(gas(), token0, emptyPtr, 0x24, 0x00, 0x20)
                ) {
                    revertWithReason(
                        0x0000001562616c616e63654f662063616c6c206661696c656400000000000000,
                        0x59
                    ) // "balanceOf call failed"
                }
                balance0 := mload(0x00)
            }
            function _getBalanceOfToken1(emptyPtr, pair) -> token1, balance1 {
                mstore(emptyPtr, _BALANCEOF_TOKEN1_SELECTOR)
                if iszero(
                    staticcall(
                        gas(),
                        pair,
                        add(0x04, emptyPtr),
                        0x04,
                        0x00,
                        0x20
                    )
                ) {
                    revertWithReason(
                        0x00000012746f6b656e312063616c6c206661696c656400000000000000000000,
                        0x56
                    ) // "token1 call failed"
                }
                token1 := mload(0x00)
                mstore(add(0x04, emptyPtr), pair)
                if iszero(
                    staticcall(gas(), token1, emptyPtr, 0x24, 0x00, 0x20)
                ) {
                    revertWithReason(
                        0x0000001562616c616e63654f662063616c6c206661696c656400000000000000,
                        0x59
                    ) // "balanceOf call failed"
                }
                balance1 := mload(0x00)
            }
            function swap(
                emptyPtr,
                swapAmount,
                pair,
                reversed,
                isToken0Tax,
                isToken1Tax,
                numerator,
                dst
            ) -> ret {
                mstore(emptyPtr, _SWAP_GETRESERVES_SELECTOR)
                if iszero(
                    staticcall(
                        gas(),
                        pair,
                        add(0x04, emptyPtr),
                        0x4,
                        0x00,
                        0x40
                    )
                ) {
                    // we only need the first 0x40 bytes, no need timestamp info
                    revertWithReason(
                        0x0000001472657365727665732063616c6c206661696c65640000000000000000,
                        0x58
                    ) // "reserves call failed"
                }
                let reserve0 := mload(0x00)
                let reserve1 := mload(0x20)
                switch reversed
                case 0 {
                    //swap token0 for token1
                    if isToken0Tax {
                        let token0, balance0 := _getBalanceOfToken0(
                            emptyPtr,
                            pair
                        )
                        swapAmount := sub(balance0, reserve0)
                    }
                }
                default {
                    //swap token1 for token0
                    if isToken1Tax {
                        let token1, balance1 := _getBalanceOfToken1(
                            emptyPtr,
                            pair
                        )
                        swapAmount := sub(balance1, reserve1)
                    }
                    let temp := reserve0
                    reserve0 := reserve1
                    reserve1 := temp
                }
                ret := mul(swapAmount, numerator)
                ret := div(
                    mul(ret, reserve1),
                    add(ret, mul(reserve0, _DENOMINATOR))
                )
                mstore(emptyPtr, _SWAP_GETRESERVES_SELECTOR)
                switch reversed
                case 0 {
                    mstore(add(emptyPtr, 0x04), 0)
                    mstore(add(emptyPtr, 0x24), ret)
                }
                default {
                    mstore(add(emptyPtr, 0x04), ret)
                    mstore(add(emptyPtr, 0x24), 0)
                }
                mstore(add(emptyPtr, 0x44), dst)
                mstore(add(emptyPtr, 0x64), 0x80)
                mstore(add(emptyPtr, 0x84), 0)
                if iszero(call(gas(), pair, 0, emptyPtr, 0xa4, 0, 0)) {
                    revertWithReason(
                        0x00000010737761702063616c6c206661696c6564000000000000000000000000,
                        0x54
                    ) // "swap call failed"
                }
            }
            let poolsOffset
            let poolsEndOffset
            {
                let len := pools.length
                poolsOffset := pools.offset //
                poolsEndOffset := add(poolsOffset, mul(len, 32))
                if eq(len, 0) {
                    revertWithReason(
                        0x000000b656d70747920706f6f6c73000000000000000000000000000000000000,
                        0x4e
                    ) // "empty pools"
                }
            }
            let emptyPtr := mload(0x40)
            let rawPair := calldataload(poolsOffset)
            switch eq(ETH_ADDRESS, srcToken)
            case 1 {
                // require callvalue() >= amount, lt: if x < y return 1，else return 0
                if eq(lt(callvalue(), amount), 1) {
                    revertWithReason(
                        0x00000011696e76616c6964206d73672e76616c75650000000000000000000000,
                        0x55
                    ) // "invalid msg.value"
                }
                mstore(emptyPtr, _TRANSFER_DEPOSIT_SELECTOR)
                if iszero(
                    call(gas(), _WETH, amount, add(emptyPtr, 0x04), 0x4, 0, 0)
                ) {
                    revertWithReason(
                        0x000000126465706f73697420455448206661696c656400000000000000000000,
                        0x56
                    ) // "deposit ETH failed"
                }
                mstore(add(0x04, emptyPtr), and(rawPair, _ADDRESS_MASK))
                mstore(add(0x24, emptyPtr), amount)
                if iszero(call(gas(), _WETH, 0, emptyPtr, 0x44, 0, 0x20)) {
                    revertWithReason(
                        0x000000147472616e736665722057455448206661696c65640000000000000000,
                        0x58
                    ) // "transfer WETH failed"
                }
            }
            default {
                if callvalue() {
                    revertWithReason(
                        0x00000011696e76616c6964206d73672e76616c75650000000000000000000000,
                        0x55
                    ) // "invalid msg.value"
                }
                mstore(emptyPtr, _CLAIM_TOKENS_CALL_SELECTOR_32)
                mstore(add(emptyPtr, 0x4), srcToken)
                mstore(add(emptyPtr, 0x24), payer)
                mstore(add(emptyPtr, 0x44), and(rawPair, _ADDRESS_MASK))
                mstore(add(emptyPtr, 0x64), amount)
                if iszero(
                    call(gas(), _APPROVE_PROXY, 0, emptyPtr, 0x84, 0, 0)
                ) {
                    revertWithReason(
                        0x00000012636c61696d20746f6b656e206661696c656400000000000000000000,
                        0x56
                    ) // "claim token failed"
                }
            }
            returnAmount := amount
            for {
                let i := add(poolsOffset, 0x20)
            } lt(i, poolsEndOffset) {
                i := add(i, 0x20)
            } {
                let nextRawPair := calldataload(i)
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    and(rawPair, _IS_TOKEN0_TAX),
                    and(rawPair, _IS_TOKEN1_TAX),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    and(nextRawPair, _ADDRESS_MASK)
                )
                rawPair := nextRawPair
            }
            let toToken
            switch and(rawPair, _WETH_MASK)
            case 0 {
                let beforeAmount
                switch and(rawPair, _REVERSE_MASK)
                case 0 {
                    if and(rawPair, _IS_TOKEN1_TAX) {
                        mstore(emptyPtr, _BALANCEOF_TOKEN1_SELECTOR)
                        if iszero(
                            staticcall(
                                gas(),
                                and(rawPair, _ADDRESS_MASK),
                                add(0x04, emptyPtr),
                                0x04,
                                0x00,
                                0x20
                            )
                        ) {
                            revertWithReason(
                                0x00000012746f6b656e312063616c6c206661696c656400000000000000000000,
                                0x56
                            ) // "token1 call failed"
                        }
                        toToken := mload(0)
                        mstore(add(0x04, emptyPtr), receiver)
                        if iszero(
                            staticcall(
                                gas(),
                                toToken,
                                emptyPtr,
                                0x24,
                                0x00,
                                0x20
                            )
                        ) {
                            revertWithReason(
                                0x00000015746f6b656e312062616c616e6365206661696c656400000000000000,
                                0x59
                            ) // "token1 balance failed"
                        }
                        beforeAmount := mload(0)
                    }
                }
                default {
                    if and(rawPair, _IS_TOKEN0_TAX) {
                        mstore(emptyPtr, _BALANCEOF_TOKEN0_SELECTOR)
                        if iszero(
                            staticcall(
                                gas(),
                                and(rawPair, _ADDRESS_MASK),
                                add(0x04, emptyPtr),
                                0x04,
                                0x00,
                                0x20
                            )
                        ) {
                            revertWithReason(
                                0x00000012746f6b656e302063616c6c206661696c656400000000000000000000,
                                0x56
                            ) // "token0 call failed"
                        }
                        toToken := mload(0)
                        mstore(add(0x04, emptyPtr), receiver)
                        if iszero(
                            staticcall(
                                gas(),
                                toToken,
                                emptyPtr,
                                0x24,
                                0x00,
                                0x20
                            )
                        ) {
                            revertWithReason(
                                0x00000015746f6b656e302062616c616e6365206661696c656400000000000000,
                                0x56
                            ) // "token0 balance failed"
                        }
                        beforeAmount := mload(0)
                    }
                }
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    and(rawPair, _IS_TOKEN0_TAX),
                    and(rawPair, _IS_TOKEN1_TAX),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    receiver
                )
                switch lt(0x0, toToken)
                case 1 {
                    mstore(emptyPtr, _BALANCEOF_TOKEN0_SELECTOR)
                    mstore(add(0x04, emptyPtr), receiver)
                    if iszero(
                        staticcall(gas(), toToken, emptyPtr, 0x24, 0x00, 0x20)
                    ) {
                        revertWithReason(
                            0x000000146765742062616c616e63654f66206661696c65640000000000000000,
                            0x58
                        ) // "get balanceOf failed"
                    }
                    returnAmount := sub(mload(0), beforeAmount)
                }
                default {
                    // set token0 addr for the non-safemoon token
                    switch and(rawPair, _REVERSE_MASK)
                    case 0 {
                        // get token1
                        toToken := _getTokenAddr(
                            emptyPtr,
                            and(rawPair, _ADDRESS_MASK),
                            _BALANCEOF_TOKEN1_SELECTOR
                        )
                    }
                    default {
                        // get token0
                        toToken := _getTokenAddr(
                            emptyPtr,
                            and(rawPair, _ADDRESS_MASK),
                            _BALANCEOF_TOKEN0_SELECTOR
                        )
                    }
                }
            }
            default {
                toToken := ETH_ADDRESS
                returnAmount := swap(
                    emptyPtr,
                    returnAmount,
                    and(rawPair, _ADDRESS_MASK),
                    and(rawPair, _REVERSE_MASK),
                    and(rawPair, _IS_TOKEN0_TAX),
                    and(rawPair, _IS_TOKEN1_TAX),
                    shr(_NUMERATOR_OFFSET, and(rawPair, _NUMERATOR_MASK)),
                    address()
                )
                mstore(emptyPtr, _WITHDRAW_TRNASFER_SELECTOR)
                mstore(add(emptyPtr, 0x08), _WNATIVE_RELAY)
                mstore(add(emptyPtr, 0x28), returnAmount)
                if iszero(
                    call(gas(), _WETH, 0, add(0x04, emptyPtr), 0x44, 0, 0x20)
                ) {
                    revertWithReason(
                        0x000000147472616e736665722057455448206661696c65640000000000000000,
                        0x58
                    ) // "transfer WETH failed"
                }
                mstore(add(emptyPtr, 0x04), returnAmount)
                if iszero(
                    call(gas(), _WNATIVE_RELAY, 0, emptyPtr, 0x24, 0, 0x20)
                ) {
                    revertWithReason(
                        0x00000013776974686472617720455448206661696c6564000000000000000000,
                        0x57
                    ) // "withdraw ETH failed"
                }
                if iszero(call(gas(), receiver, returnAmount, 0, 0, 0, 0)) {
                    revertWithReason(
                        0x000000137472616e7366657220455448206661696c6564000000000000000000,
                        0x57
                    ) // "transfer ETH failed"
                }
            }
            if lt(returnAmount, minReturn) {
                revertWithReason(
                    0x000000164d696e2072657475726e206e6f742072656163686564000000000000,
                    0x5a
                ) // "Min return not reached"
            }
            // emit event
            mstore(emptyPtr, srcToken)
            mstore(add(emptyPtr, 0x20), toToken)
            mstore(add(emptyPtr, 0x40), origin())
            mstore(add(emptyPtr, 0x60), amount)
            mstore(add(emptyPtr, 0x80), returnAmount)
            log1(
                emptyPtr,
                0xa0,
                0x1bb43f2da90e35f7b0cf38521ca95a49e68eb42fac49924930a5bd73cdf7576c
            )
        }
    }
}
/// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
import "./interfaces/IUniswapV3SwapCallback.sol";
import "./interfaces/IUniV3.sol";
import "./interfaces/IWETH.sol";
import "./interfaces/IWNativeRelayer.sol";
import "./libraries/Address.sol";
import "./libraries/CommonUtils.sol";
import "./libraries/RouterErrors.sol";
import "./libraries/SafeCast.sol";
contract UnxswapV3Router is IUniswapV3SwapCallback, CommonUtils {
    using Address for address payable;
    uint256 private constant _ONE_FOR_ZERO_MASK = 1 << 255; // Mask for identifying if the swap is one-for-zero
    uint256 private constant _WETH_UNWRAP_MASK = 1 << 253; // Mask for identifying if WETH should be unwrapped to ETH
    bytes32 private constant _POOL_INIT_CODE_HASH =
        0xe34f199b19b2b4f47f68442619d555527d244f78a3297ea89325f843f87b8b54; // Pool init code hash
    bytes32 private constant _FF_FACTORY =
        0xff1F98431c8aD98523631AE4a59f267346ea31F9840000000000000000000000; // Factory address
    // concatenation of token0(), token1() fee(), transfer() and claimTokens() selectors
    bytes32 private constant _SELECTORS =
        0x0dfe1681d21220a7ddca3f43a9059cbb0a5ea466000000000000000000000000;
    // concatenation of withdraw(uint),transfer()
    bytes32 private constant _SELECTORS2 =
        0x2e1a7d4da9059cbb000000000000000000000000000000000000000000000000;
    uint160 private constant _MIN_SQRT_RATIO = 4_295_128_739 + 1;
    uint160 private constant _MAX_SQRT_RATIO =
        1_461_446_703_485_210_103_287_273_052_203_988_822_378_723_970_342 - 1;
    bytes32 private constant _SWAP_SELECTOR =
        0x128acb0800000000000000000000000000000000000000000000000000000000; // Swap function selector
    uint256 private constant _INT256_MAX =
        0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff; // Maximum int256
    uint256 private constant _INT256_MIN =
        0x8000000000000000000000000000000000000000000000000000000000000000; // Minimum int256
    /// @notice Conducts a swap using the Uniswap V3 protocol internally within the contract.
    /// @param payer The address of the account providing the tokens for the swap.
    /// @param receiver The address that will receive the tokens after the swap.
    /// @param amount The amount of the source token to be swapped.
    /// @param minReturn The minimum amount of tokens that must be received for the swap to be valid, safeguarding against excessive slippage.
    /// @param pools An array of pool identifiers defining the swap route within Uniswap V3.
    /// @return returnAmount The amount of tokens received from the swap.
    /// @return srcTokenAddr The address of the source token used for the swap.
    /// @dev This internal function encapsulates the core logic for executing swaps on Uniswap V3. It is intended to be used by other functions in the contract that prepare and pass the necessary parameters. The function handles the swapping process, ensuring that the minimum return is met and managing the transfer of tokens.
    function _uniswapV3Swap(
        address payer,
        address payable receiver,
        uint256 amount,
        uint256 minReturn,
        uint256[] calldata pools
    ) internal returns (uint256 returnAmount, address srcTokenAddr) {
        assembly {
            function _revertWithReason(m, len) {
                mstore(
                    0,
                    0x08c379a000000000000000000000000000000000000000000000000000000000
                )
                mstore(
                    0x20,
                    0x0000002000000000000000000000000000000000000000000000000000000000
                )
                mstore(0x40, m)
                revert(0, len)
            }
            function _makeSwap(_receiver, _payer, _pool, _amount)
                -> _returnAmount
            {
                if lt(_INT256_MAX, _amount) {
                    mstore(
                        0,
                        0xb3f79fd000000000000000000000000000000000000000000000000000000000
                    ) //SafeCastToInt256Failed()
                    revert(0, 4)
                }
                let freePtr := mload(0x40)
                let zeroForOne := eq(and(_pool, _ONE_FOR_ZERO_MASK), 0)
                let poolAddr := and(_pool, _ADDRESS_MASK)
                switch zeroForOne
                case 1 {
                    mstore(freePtr, _SWAP_SELECTOR)
                    let paramPtr := add(freePtr, 4)
                    mstore(paramPtr, _receiver)
                    mstore(add(paramPtr, 0x20), true)
                    mstore(add(paramPtr, 0x40), _amount)
                    mstore(add(paramPtr, 0x60), _MIN_SQRT_RATIO)
                    mstore(add(paramPtr, 0x80), 0xa0)
                    mstore(add(paramPtr, 0xa0), 32)
                    mstore(add(paramPtr, 0xc0), _payer)
                    let success := call(gas(), poolAddr, 0, freePtr, 0xe4, 0, 0)
                    if iszero(success) {
                        revert(0, 32)
                    }
                    returndatacopy(0, 32, 32) // only copy _amount1   MEM[0:] <= RETURNDATA[32:32+32]
                }
                default {
                    mstore(freePtr, _SWAP_SELECTOR)
                    let paramPtr := add(freePtr, 4)
                    mstore(paramPtr, _receiver)
                    mstore(add(paramPtr, 0x20), false)
                    mstore(add(paramPtr, 0x40), _amount)
                    mstore(add(paramPtr, 0x60), _MAX_SQRT_RATIO)
                    mstore(add(paramPtr, 0x80), 0xa0)
                    mstore(add(paramPtr, 0xa0), 32)
                    mstore(add(paramPtr, 0xc0), _payer)
                    let success := call(gas(), poolAddr, 0, freePtr, 0xe4, 0, 0)
                    if iszero(success) {
                        revert(0, 32)
                    }
                    returndatacopy(0, 0, 32) // only copy _amount0   MEM[0:] <= RETURNDATA[0:0+32]
                }
                _returnAmount := mload(0)
                if lt(_returnAmount, _INT256_MIN) {
                    mstore(
                        0,
                        0x88c8ee9c00000000000000000000000000000000000000000000000000000000
                    ) //SafeCastToUint256Failed()
                    revert(0, 4)
                }
                _returnAmount := add(1, not(_returnAmount)) // -a = ~a + 1
            }
            function _wrapWeth(_amount) {
                // require callvalue() >= amount, lt: if x < y return 1，else return 0
                if eq(lt(callvalue(), _amount), 1) {
                    mstore(
                        0,
                        0x1841b4e100000000000000000000000000000000000000000000000000000000
                    ) // InvalidMsgValue()
                    revert(0, 4)
                }
                let success := call(gas(), _WETH, _amount, 0, 0, 0, 0) //进入fallback逻辑
                if iszero(success) {
                    _revertWithReason(
                        0x0000001357455448206465706f736974206661696c6564000000000000000000,
                        87
                    ) //WETH deposit failed
                }
            }
            function _unWrapWeth(_receiver, _amount) {
                let freePtr := mload(0x40)
                let transferPtr := add(freePtr, 4)
                mstore(freePtr, _SELECTORS2) // withdraw amountWith to amount
                // transfer
                mstore(add(transferPtr, 4), _WNATIVE_RELAY)
                mstore(add(transferPtr, 36), _amount)
                let success := call(gas(), _WETH, 0, transferPtr, 68, 0, 0)
                if iszero(success) {
                    _revertWithReason(
                        0x000000147472616e736665722077657468206661696c65640000000000000000,
                        88
                    ) // transfer weth failed
                }
                // withdraw
                mstore(add(freePtr, 4), _amount)
                success := call(gas(), _WNATIVE_RELAY, 0, freePtr, 36, 0, 0)
                if iszero(success) {
                    _revertWithReason(
                        0x0000001477697468647261772077657468206661696c65640000000000000000,
                        88
                    ) // withdraw weth failed
                }
                // msg.value transfer
                success := call(gas(), _receiver, _amount, 0, 0, 0, 0)
                if iszero(success) {
                    _revertWithReason(
                        0x0000001173656e64206574686572206661696c65640000000000000000000000,
                        85
                    ) // send ether failed
                }
            }
            function _token0(_pool) -> token0 {
                let freePtr := mload(0x40)
                mstore(freePtr, _SELECTORS)
                let success := staticcall(gas(), _pool, freePtr, 0x4, 0, 0)
                if iszero(success) {
                    _revertWithReason(
                        0x0000001167657420746f6b656e30206661696c65640000000000000000000000,
                        85
                    ) // get token0 failed
                }
                returndatacopy(0, 0, 32)
                token0 := mload(0)
            }
            function _token1(_pool) -> token1 {
                let freePtr := mload(0x40)
                mstore(freePtr, _SELECTORS)
                let success := staticcall(
                    gas(),
                    _pool,
                    add(freePtr, 4),
                    0x4,
                    0,
                    0
                )
                if iszero(success) {
                    _revertWithReason(
                        0x0000001167657420746f6b656e31206661696c65640000000000000000000000,
                        84
                    ) // get token1 failed
                }
                returndatacopy(0, 0, 32)
                token1 := mload(0)
            }
            function _emitEvent(
                _firstPoolStart,
                _lastPoolStart,
                _returnAmount,
                wrapWeth,
                unwrapWeth
            ) -> srcToken {
                srcToken := _ETH
                let toToken := _ETH
                if eq(wrapWeth, false) {
                    let firstPool := calldataload(_firstPoolStart)
                    switch eq(0, and(firstPool, _ONE_FOR_ZERO_MASK))
                    case true {
                        srcToken := _token0(firstPool)
                    }
                    default {
                        srcToken := _token1(firstPool)
                    }
                }
                if eq(unwrapWeth, false) {
                    let lastPool := calldataload(_lastPoolStart)
                    switch eq(0, and(lastPool, _ONE_FOR_ZERO_MASK))
                    case true {
                        toToken := _token1(lastPool)
                    }
                    default {
                        toToken := _token0(lastPool)
                    }
                }
                let freePtr := mload(0x40)
                mstore(0, srcToken)
                mstore(32, toToken)
                mstore(64, origin())
                // mstore(96, _initAmount) //avoid stack too deep, since i mstore the initAmount to 96, so no need to re-mstore it
                mstore(128, _returnAmount)
                log1(
                    0,
                    160,
                    0x1bb43f2da90e35f7b0cf38521ca95a49e68eb42fac49924930a5bd73cdf7576c
                )
                mstore(0x40, freePtr)
            }
            let firstPoolStart
            let lastPoolStart
            {
                let len := pools.length
                firstPoolStart := pools.offset //
                lastPoolStart := sub(add(firstPoolStart, mul(len, 32)), 32)
                if eq(len, 0) {
                    mstore(
                        0,
                        0x67e7c0f600000000000000000000000000000000000000000000000000000000
                    ) // EmptyPools()
                    revert(0, 4)
                }
            }
            let wrapWeth := gt(callvalue(), 0)
            if wrapWeth {
                _wrapWeth(amount)
                payer := address()
            }
            mstore(96, amount) // 96 is not override by _makeSwap, since it only use freePtr memory, and it is not override by unWrapWeth ethier
            for {
                let i := firstPoolStart
            } lt(i, lastPoolStart) {
                i := add(i, 32)
            } {
                amount := _makeSwap(address(), payer, calldataload(i), amount)
                payer := address()
            }
            let unwrapWeth := gt(
                and(calldataload(lastPoolStart), _WETH_UNWRAP_MASK),
                0
            ) // pools[lastIndex] & _WETH_UNWRAP_MASK > 0
            // last one or only one
            switch unwrapWeth
            case 1 {
                returnAmount := _makeSwap(
                    address(),
                    payer,
                    calldataload(lastPoolStart),
                    amount
                )
                _unWrapWeth(receiver, returnAmount)
            }
            case 0 {
                returnAmount := _makeSwap(
                    receiver,
                    payer,
                    calldataload(lastPoolStart),
                    amount
                )
            }
            if lt(returnAmount, minReturn) {
                _revertWithReason(
                    0x000000164d696e2072657475726e206e6f742072656163686564000000000000,
                    90
                ) // Min return not reached
            }
            srcTokenAddr := _emitEvent(
                firstPoolStart,
                lastPoolStart,
                returnAmount,
                wrapWeth,
                unwrapWeth
            )
        }
    }
    /// @inheritdoc IUniswapV3SwapCallback
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata /*data*/
    ) external override {
        assembly {
            // solhint-disable-line no-inline-assembly
            function reRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }
            function validateERC20Transfer(status) {
                if iszero(status) {
                    reRevert()
                }
                let success := or(
                    iszero(returndatasize()), // empty return data
                    and(gt(returndatasize(), 31), eq(mload(0), 1)) // true in return data
                )
                if iszero(success) {
                    mstore(
                        0,
                        0xf27f64e400000000000000000000000000000000000000000000000000000000
                    ) // ERC20TransferFailed()
                    revert(0, 4)
                }
            }
            let emptyPtr := mload(0x40)
            let resultPtr := add(emptyPtr, 21) // 0x15 = _FF_FACTORY size
            mstore(emptyPtr, _SELECTORS)
            // token0
            if iszero(staticcall(gas(), caller(), emptyPtr, 4, 0, 32)) {
                reRevert()
            }
            //token1
            if iszero(
                staticcall(gas(), caller(), add(emptyPtr, 4), 4, 32, 32)
            ) {
                reRevert()
            }
            // fee
            if iszero(
                staticcall(gas(), caller(), add(emptyPtr, 8), 4, 64, 32)
            ) {
                reRevert()
            }
            let token
            let amount
            switch sgt(amount0Delta, 0)
            case 1 {
                token := mload(0)
                amount := amount0Delta
            }
            default {
                token := mload(32)
                amount := amount1Delta
            }
            // let salt := keccak256(0, 96)
            mstore(emptyPtr, _FF_FACTORY)
            mstore(resultPtr, keccak256(0, 96)) // Compute the inner hash in-place
            mstore(add(resultPtr, 32), _POOL_INIT_CODE_HASH)
            let pool := and(keccak256(emptyPtr, 85), _ADDRESS_MASK)
            if iszero(eq(pool, caller())) {
                // if xor(pool, caller()) {
                mstore(
                    0,
                    0xb2c0272200000000000000000000000000000000000000000000000000000000
                ) // BadPool()
                revert(0, 4)
            }
            let payer := calldataload(132) // 4+32+32+32+32 = 132
            mstore(emptyPtr, _SELECTORS)
            switch eq(payer, address())
            case 1 {
                // token.safeTransfer(msg.sender,amount)
                mstore(add(emptyPtr, 0x10), caller())
                mstore(add(emptyPtr, 0x30), amount)
                validateERC20Transfer(
                    call(gas(), token, 0, add(emptyPtr, 0x0c), 0x44, 0, 0x20)
                )
            }
            default {
                // approveProxy.claimTokens(token, payer, msg.sender, amount);
                mstore(add(emptyPtr, 0x14), token)
                mstore(add(emptyPtr, 0x34), payer)
                mstore(add(emptyPtr, 0x54), caller())
                mstore(add(emptyPtr, 0x74), amount)
                validateERC20Transfer(
                    call(
                        gas(),
                        _APPROVE_PROXY,
                        0,
                        add(emptyPtr, 0x10),
                        0x84,
                        0,
                        0x20
                    )
                )
            }
        }
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

pragma solidity ^0.4.24;

// File: zos-lib/contracts/upgradeability/Proxy.sol

/**
 * @title Proxy
 * @dev Implements delegation of calls to other contracts, with proper
 * forwarding of return values and bubbling of failures.
 * It defines a fallback function that delegates all calls to the address
 * returned by the abstract _implementation() internal function.
 */
contract Proxy {
  /**
   * @dev Fallback function.
   * Implemented entirely in `_fallback`.
   */
  function () payable external {
    _fallback();
  }

  /**
   * @return The Address of the implementation.
   */
  function _implementation() internal view returns (address);

  /**
   * @dev Delegates execution to an implementation contract.
   * This is a low level function that doesn't return to its internal call site.
   * It will return to the external caller whatever the implementation returns.
   * @param implementation Address to delegate.
   */
  function _delegate(address implementation) internal {
    assembly {
      // Copy msg.data. We take full control of memory in this inline assembly
      // block because it will not return to Solidity code. We overwrite the
      // Solidity scratch pad at memory position 0.
      calldatacopy(0, 0, calldatasize)

      // Call the implementation.
      // out and outsize are 0 because we don't know the size yet.
      let result := delegatecall(gas, implementation, 0, calldatasize, 0, 0)

      // Copy the returned data.
      returndatacopy(0, 0, returndatasize)

      switch result
      // delegatecall returns 0 on error.
      case 0 { revert(0, returndatasize) }
      default { return(0, returndatasize) }
    }
  }

  /**
   * @dev Function that is run as the first thing in the fallback function.
   * Can be redefined in derived contracts to add functionality.
   * Redefinitions must call super._willFallback().
   */
  function _willFallback() internal {
  }

  /**
   * @dev fallback implementation.
   * Extracted to enable manual triggering.
   */
  function _fallback() internal {
    _willFallback();
    _delegate(_implementation());
  }
}

// File: openzeppelin-solidity/contracts/AddressUtils.sol

/**
 * Utility library of inline functions on addresses
 */
library AddressUtils {

  /**
   * Returns whether the target address is a contract
   * @dev This function will return false if invoked during the constructor of a contract,
   * as the code is not actually created until after the constructor finishes.
   * @param addr address to check
   * @return whether the target address is a contract
   */
  function isContract(address addr) internal view returns (bool) {
    uint256 size;
    // XXX Currently there is no better way to check if there is a contract in an address
    // than to check the size of the code at that address.
    // See https://ethereum.stackexchange.com/a/14016/36603
    // for more details about how this works.
    // TODO Check this again before the Serenity release, because all addresses will be
    // contracts then.
    // solium-disable-next-line security/no-inline-assembly
    assembly { size := extcodesize(addr) }
    return size > 0;
  }

}

// File: zos-lib/contracts/upgradeability/UpgradeabilityProxy.sol

/**
 * @title UpgradeabilityProxy
 * @dev This contract implements a proxy that allows to change the
 * implementation address to which it will delegate.
 * Such a change is called an implementation upgrade.
 */
contract UpgradeabilityProxy is Proxy {
  /**
   * @dev Emitted when the implementation is upgraded.
   * @param implementation Address of the new implementation.
   */
  event Upgraded(address implementation);

  /**
   * @dev Storage slot with the address of the current implementation.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.implementation", and is
   * validated in the constructor.
   */
  bytes32 private constant IMPLEMENTATION_SLOT = 0x7050c9e0f4ca769c69bd3a8ef740bc37934f8e2c036e5a723fd8ee048ed3f8c3;

  /**
   * @dev Contract constructor.
   * @param _implementation Address of the initial implementation.
   */
  constructor(address _implementation) public {
    assert(IMPLEMENTATION_SLOT == keccak256("org.zeppelinos.proxy.implementation"));

    _setImplementation(_implementation);
  }

  /**
   * @dev Returns the current implementation.
   * @return Address of the current implementation
   */
  function _implementation() internal view returns (address impl) {
    bytes32 slot = IMPLEMENTATION_SLOT;
    assembly {
      impl := sload(slot)
    }
  }

  /**
   * @dev Upgrades the proxy to a new implementation.
   * @param newImplementation Address of the new implementation.
   */
  function _upgradeTo(address newImplementation) internal {
    _setImplementation(newImplementation);
    emit Upgraded(newImplementation);
  }

  /**
   * @dev Sets the implementation address of the proxy.
   * @param newImplementation Address of the new implementation.
   */
  function _setImplementation(address newImplementation) private {
    require(AddressUtils.isContract(newImplementation), "Cannot set a proxy implementation to a non-contract address");

    bytes32 slot = IMPLEMENTATION_SLOT;

    assembly {
      sstore(slot, newImplementation)
    }
  }
}

// File: zos-lib/contracts/upgradeability/AdminUpgradeabilityProxy.sol

/**
 * @title AdminUpgradeabilityProxy
 * @dev This contract combines an upgradeability proxy with an authorization
 * mechanism for administrative tasks.
 * All external functions in this contract must be guarded by the
 * `ifAdmin` modifier. See ethereum/solidity#3864 for a Solidity
 * feature proposal that would enable this to be done automatically.
 */
contract AdminUpgradeabilityProxy is UpgradeabilityProxy {
  /**
   * @dev Emitted when the administration has been transferred.
   * @param previousAdmin Address of the previous admin.
   * @param newAdmin Address of the new admin.
   */
  event AdminChanged(address previousAdmin, address newAdmin);

  /**
   * @dev Storage slot with the admin of the contract.
   * This is the keccak-256 hash of "org.zeppelinos.proxy.admin", and is
   * validated in the constructor.
   */
  bytes32 private constant ADMIN_SLOT = 0x10d6a54a4754c8869d6886b5f5d7fbfa5b4522237ea5c60d11bc4e7a1ff9390b;

  /**
   * @dev Modifier to check whether the `msg.sender` is the admin.
   * If it is, it will run the function. Otherwise, it will delegate the call
   * to the implementation.
   */
  modifier ifAdmin() {
    if (msg.sender == _admin()) {
      _;
    } else {
      _fallback();
    }
  }

  /**
   * Contract constructor.
   * It sets the `msg.sender` as the proxy administrator.
   * @param _implementation address of the initial implementation.
   */
  constructor(address _implementation) UpgradeabilityProxy(_implementation) public {
    assert(ADMIN_SLOT == keccak256("org.zeppelinos.proxy.admin"));

    _setAdmin(msg.sender);
  }

  /**
   * @return The address of the proxy admin.
   */
  function admin() external view ifAdmin returns (address) {
    return _admin();
  }

  /**
   * @return The address of the implementation.
   */
  function implementation() external view ifAdmin returns (address) {
    return _implementation();
  }

  /**
   * @dev Changes the admin of the proxy.
   * Only the current admin can call this function.
   * @param newAdmin Address to transfer proxy administration to.
   */
  function changeAdmin(address newAdmin) external ifAdmin {
    require(newAdmin != address(0), "Cannot change the admin of a proxy to the zero address");
    emit AdminChanged(_admin(), newAdmin);
    _setAdmin(newAdmin);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy.
   * Only the admin can call this function.
   * @param newImplementation Address of the new implementation.
   */
  function upgradeTo(address newImplementation) external ifAdmin {
    _upgradeTo(newImplementation);
  }

  /**
   * @dev Upgrade the backing implementation of the proxy and call a function
   * on the new implementation.
   * This is useful to initialize the proxied contract.
   * @param newImplementation Address of the new implementation.
   * @param data Data to send as msg.data in the low level call.
   * It should include the signature and the parameters of the function to be
   * called, as described in
   * https://solidity.readthedocs.io/en/develop/abi-spec.html#function-selector-and-argument-encoding.
   */
  function upgradeToAndCall(address newImplementation, bytes data) payable external ifAdmin {
    _upgradeTo(newImplementation);
    require(address(this).call.value(msg.value)(data));
  }

  /**
   * @return The admin slot.
   */
  function _admin() internal view returns (address adm) {
    bytes32 slot = ADMIN_SLOT;
    assembly {
      adm := sload(slot)
    }
  }

  /**
   * @dev Sets the address of the proxy admin.
   * @param newAdmin Address of the new proxy admin.
   */
  function _setAdmin(address newAdmin) internal {
    bytes32 slot = ADMIN_SLOT;

    assembly {
      sstore(slot, newAdmin)
    }
  }

  /**
   * @dev Only fall back when the sender is not the admin.
   */
  function _willFallback() internal {
    require(msg.sender != _admin(), "Cannot call fallback function from the proxy admin");
    super._willFallback();
  }
}

// File: contracts/FiatTokenProxy.sol

/**
* Copyright CENTRE SECZ 2018
*
* Permission is hereby granted, free of charge, to any person obtaining a copy 
* of this software and associated documentation files (the "Software"), to deal 
* in the Software without restriction, including without limitation the rights 
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
* copies of the Software, and to permit persons to whom the Software is furnished to 
* do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all 
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

pragma solidity ^0.4.24;


/**
 * @title FiatTokenProxy
 * @dev This contract proxies FiatToken calls and enables FiatToken upgrades
*/ 
contract FiatTokenProxy is AdminUpgradeabilityProxy {
    constructor(address _implementation) public AdminUpgradeabilityProxy(_implementation) {
    }
}

{"Constants.84ef19f8.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nlibrary Constants {\r\n    address internal constant ETH = 0x0000000000000000000000000000000000000000;\r\n}\r\n"},"Spender.3372a096.sol":{"content":"// SPDX-License-Identifier: MIT\r\n\r\npragma solidity ^0.6.0;\r\n\r\nimport \"./Constants.84ef19f8.sol\";\r\n\r\ncontract Spender {\r\n    address public immutable metaswap;\r\n\r\n    constructor() public {\r\n        metaswap = msg.sender;\r\n    }\r\n\r\n    /// @dev Receives ether from swaps\r\n    fallback() external payable {}\r\n\r\n    function swap(address adapter, bytes calldata data) external payable {\r\n        require(msg.sender == metaswap, \"FORBIDDEN\");\r\n        require(adapter != address(0), \"ADAPTER_NOT_PROVIDED\");\r\n        _delegate(adapter, data, \"ADAPTER_DELEGATECALL_FAILED\");\r\n    }\r\n\r\n    /**\r\n     * @dev Performs a delegatecall and bubbles up the errors, adapted from\r\n     * https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol\r\n     * @param target Address of the contract to delegatecall\r\n     * @param data Data passed in the delegatecall\r\n     * @param errorMessage Fallback revert reason\r\n     */\r\n    function _delegate(\r\n        address target,\r\n        bytes memory data,\r\n        string memory errorMessage\r\n    ) private returns (bytes memory) {\r\n        // solhint-disable-next-line avoid-low-level-calls\r\n        (bool success, bytes memory returndata) = target.delegatecall(data);\r\n        if (success) {\r\n            return returndata;\r\n        } else {\r\n            // Look for revert reason and bubble it up if present\r\n            if (returndata.length \u003e 0) {\r\n                // The easiest way to bubble the revert reason is using memory via assembly\r\n\r\n                // solhint-disable-next-line no-inline-assembly\r\n                assembly {\r\n                    let returndata_size := mload(returndata)\r\n                    revert(add(32, returndata), returndata_size)\r\n                }\r\n            } else {\r\n                revert(errorMessage);\r\n            }\r\n        }\r\n    }\r\n}\r\n"}}

/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { EIP712Domain } from "./EIP712Domain.sol"; // solhint-disable-line no-unused-import
import { Blacklistable } from "../v1/Blacklistable.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2 } from "./FiatTokenV2.sol"; // solhint-disable-line no-unused-import
import { FiatTokenV2_1 } from "./FiatTokenV2_1.sol";
import { EIP712 } from "../util/EIP712.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.2
 * @notice ERC20 Token backed by fiat reserves, version 2.2
 */
contract FiatTokenV2_2 is FiatTokenV2_1 {
    /**
     * @notice Initialize v2.2
     * @param accountsToBlacklist   A list of accounts to migrate from the old blacklist
     * @param newSymbol             New token symbol
     * data structure to the new blacklist data structure.
     */
    function initializeV2_2(
        address[] calldata accountsToBlacklist,
        string calldata newSymbol
    ) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 2);
        // Update fiat token symbol
        symbol = newSymbol;
        // Add previously blacklisted accounts to the new blacklist data structure
        // and remove them from the old blacklist data structure.
        for (uint256 i = 0; i < accountsToBlacklist.length; i++) {
            require(
                _deprecatedBlacklisted[accountsToBlacklist[i]],
                "FiatTokenV2_2: Blacklisting previously unblacklisted account!"
            );
            _blacklist(accountsToBlacklist[i]);
            delete _deprecatedBlacklisted[accountsToBlacklist[i]];
        }
        _blacklist(address(this));
        delete _deprecatedBlacklisted[address(this)];
        _initializedVersion = 3;
    }
    /**
     * @dev Internal function to get the current chain id.
     * @return The current chain id.
     */
    function _chainId() internal virtual view returns (uint256) {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return chainId;
    }
    /**
     * @inheritdoc EIP712Domain
     */
    function _domainSeparator() internal override view returns (bytes32) {
        return EIP712.makeDomainSeparator(name, "2", _chainId());
    }
    /**
     * @notice Update allowance with a signed permit
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature   Signature bytes signed by an EOA wallet or a contract wallet
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) external whenNotPaused {
        _permit(owner, spender, value, deadline, signature);
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            signature
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature bytes signed by an EOA wallet or a contract wallet
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, signature);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account on balanceAndBlacklistStates.
     * If _shouldBlacklist is true, we apply a (1 << 255) bitmask with an OR operation on the
     * account's balanceAndBlacklistState. This flips the high bit for the account to 1,
     * indicating that the account is blacklisted.
     *
     * If _shouldBlacklist if false, we reset the account's balanceAndBlacklistStates to their
     * balances. This clears the high bit for the account, indicating that the account is unblacklisted.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        override
    {
        balanceAndBlacklistStates[_account] = _shouldBlacklist
            ? balanceAndBlacklistStates[_account] | (1 << 255)
            : _balanceOf(_account);
    }
    /**
     * @dev Helper method that sets the balance of an account on balanceAndBlacklistStates.
     * Since balances are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we need to ensure that the updated balance does not exceed (2^255 - 1).
     * Since blacklisted accounts' balances cannot be updated, the method will also
     * revert if the account is blacklisted
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account (max: (2^255 - 1)).
     */
    function _setBalance(address _account, uint256 _balance) internal override {
        require(
            _balance <= ((1 << 255) - 1),
            "FiatTokenV2_2: Balance exceeds (2^255 - 1)"
        );
        require(
            !_isBlacklisted(_account),
            "FiatTokenV2_2: Account is blacklisted"
        );
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        override
        view
        returns (bool)
    {
        return balanceAndBlacklistStates[_account] >> 255 == 1;
    }
    /**
     * @dev Helper method to obtain the balance of an account. Since balances
     * are stored in the last 255 bits of the balanceAndBlacklistStates value,
     * we apply a ((1 << 255) - 1) bit bitmask with an AND operation on the
     * balanceAndBlacklistState to obtain the balance.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        override
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account] & ((1 << 255) - 1);
    }
    /**
     * @inheritdoc FiatTokenV1
     */
    function approve(address spender, uint256 value)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external override whenNotPaused {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @inheritdoc FiatTokenV2
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        override
        whenNotPaused
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV2 } from "./FiatTokenV2.sol";
// solhint-disable func-name-mixedcase
/**
 * @title FiatToken V2.1
 * @notice ERC20 Token backed by fiat reserves, version 2.1
 */
contract FiatTokenV2_1 is FiatTokenV2 {
    /**
     * @notice Initialize v2.1
     * @param lostAndFound  The address to which the locked funds are sent
     */
    function initializeV2_1(address lostAndFound) external {
        // solhint-disable-next-line reason-string
        require(_initializedVersion == 1);
        uint256 lockedAmount = _balanceOf(address(this));
        if (lockedAmount > 0) {
            _transfer(address(this), lostAndFound, lockedAmount);
        }
        _blacklist(address(this));
        _initializedVersion = 2;
    }
    /**
     * @notice Version string for the EIP712 domain separator
     * @return Version string
     */
    function version() external pure returns (string memory) {
        return "2";
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1_1 } from "../v1.1/FiatTokenV1_1.sol";
import { EIP712 } from "../util/EIP712.sol";
import { EIP3009 } from "./EIP3009.sol";
import { EIP2612 } from "./EIP2612.sol";
/**
 * @title FiatToken V2
 * @notice ERC20 Token backed by fiat reserves, version 2
 */
contract FiatTokenV2 is FiatTokenV1_1, EIP3009, EIP2612 {
    uint8 internal _initializedVersion;
    /**
     * @notice Initialize v2
     * @param newName   New token name
     */
    function initializeV2(string calldata newName) external {
        // solhint-disable-next-line reason-string
        require(initialized && _initializedVersion == 0);
        name = newName;
        _DEPRECATED_CACHED_DOMAIN_SEPARATOR = EIP712.makeDomainSeparator(
            newName,
            "2"
        );
        _initializedVersion = 1;
    }
    /**
     * @notice Increase the allowance by a given increment
     * @param spender   Spender's address
     * @param increment Amount of increase in allowance
     * @return True if successful
     */
    function increaseAllowance(address spender, uint256 increment)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _increaseAllowance(msg.sender, spender, increment);
        return true;
    }
    /**
     * @notice Decrease the allowance by a given decrement
     * @param spender   Spender's address
     * @param decrement Amount of decrease in allowance
     * @return True if successful
     */
    function decreaseAllowance(address spender, uint256 decrement)
        external
        virtual
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _decreaseAllowance(msg.sender, spender, decrement);
        return true;
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused notBlacklisted(from) notBlacklisted(to) {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            v,
            r,
            s
        );
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev Works only if the authorization is not yet used.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external whenNotPaused {
        _cancelAuthorization(authorizer, nonce, v, r, s);
    }
    /**
     * @notice Update allowance with a signed permit
     * @param owner       Token owner's address (Authorizer)
     * @param spender     Spender's address
     * @param value       Amount of allowance
     * @param deadline    The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v           v of the signature
     * @param r           r of the signature
     * @param s           s of the signature
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    )
        external
        virtual
        whenNotPaused
        notBlacklisted(owner)
        notBlacklisted(spender)
    {
        _permit(owner, spender, value, deadline, v, r, s);
    }
    /**
     * @dev Internal function to increase the allowance by a given increment
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param increment Amount of increase
     */
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal override {
        _approve(owner, spender, allowed[owner][spender].add(increment));
    }
    /**
     * @dev Internal function to decrease the allowance by a given decrement
     * @param owner     Token owner's address
     * @param spender   Spender's address
     * @param decrement Amount of decrease
     */
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal override {
        _approve(
            owner,
            spender,
            allowed[owner][spender].sub(
                decrement,
                "ERC20: decreased allowance below zero"
            )
        );
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
// solhint-disable func-name-mixedcase
/**
 * @title EIP712 Domain
 */
contract EIP712Domain {
    // was originally DOMAIN_SEPARATOR
    // but that has been moved to a method so we can override it in V2_2+
    bytes32 internal _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    /**
     * @notice Get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function DOMAIN_SEPARATOR() external view returns (bytes32) {
        return _domainSeparator();
    }
    /**
     * @dev Internal method to get the EIP712 Domain Separator.
     * @return The bytes32 EIP712 domain separator.
     */
    function _domainSeparator() internal virtual view returns (bytes32) {
        return _DEPRECATED_CACHED_DOMAIN_SEPARATOR;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
/**
 * @title EIP-3009
 * @notice Provide internal implementation for gas-abstracted transfers
 * @dev Contracts that inherit from this must wrap these with publicly
 * accessible functions, optionally adding modifiers where necessary
 */
abstract contract EIP3009 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("TransferWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant TRANSFER_WITH_AUTHORIZATION_TYPEHASH = 0x7c7c6cdb67a18743f49ec6fa9b35f50d52ed05cbed4cc592e13b44501c1a2267;
    // keccak256("ReceiveWithAuthorization(address from,address to,uint256 value,uint256 validAfter,uint256 validBefore,bytes32 nonce)")
    bytes32
        public constant RECEIVE_WITH_AUTHORIZATION_TYPEHASH = 0xd099cc98ef71107a616c4f0f941f04c322d8e254fe26b3c6668db87aae413de8;
    // keccak256("CancelAuthorization(address authorizer,bytes32 nonce)")
    bytes32
        public constant CANCEL_AUTHORIZATION_TYPEHASH = 0x158b0a9edf7a828aad02f63cd515c68ef2f50ba807396f6d12842833a1597429;
    /**
     * @dev authorizer address => nonce => bool (true if nonce is used)
     */
    mapping(address => mapping(bytes32 => bool)) private _authorizationStates;
    event AuthorizationUsed(address indexed authorizer, bytes32 indexed nonce);
    event AuthorizationCanceled(
        address indexed authorizer,
        bytes32 indexed nonce
    );
    /**
     * @notice Returns the state of an authorization
     * @dev Nonces are randomly generated 32-byte data unique to the
     * authorizer's address
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @return True if the nonce is used
     */
    function authorizationState(address authorizer, bytes32 nonce)
        external
        view
        returns (bool)
    {
        return _authorizationStates[authorizer][nonce];
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _transferWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Execute a transfer with a signed authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _transferWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    TRANSFER_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _receiveWithAuthorization(
            from,
            to,
            value,
            validAfter,
            validBefore,
            nonce,
            abi.encodePacked(r, s, v)
        );
    }
    /**
     * @notice Receive a transfer with a signed authorization from the payer
     * @dev This has an additional check to ensure that the payee's address
     * matches the caller of this function to prevent front-running attacks.
     * EOA wallet signatures should be packed in the order of r, s, v.
     * @param from          Payer's address (Authorizer)
     * @param to            Payee's address
     * @param value         Amount to be transferred
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     * @param nonce         Unique nonce
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _receiveWithAuthorization(
        address from,
        address to,
        uint256 value,
        uint256 validAfter,
        uint256 validBefore,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        require(to == msg.sender, "FiatTokenV2: caller must be the payee");
        _requireValidAuthorization(from, nonce, validAfter, validBefore);
        _requireValidSignature(
            from,
            keccak256(
                abi.encode(
                    RECEIVE_WITH_AUTHORIZATION_TYPEHASH,
                    from,
                    to,
                    value,
                    validAfter,
                    validBefore,
                    nonce
                )
            ),
            signature
        );
        _markAuthorizationAsUsed(from, nonce);
        _transfer(from, to, value);
    }
    /**
     * @notice Attempt to cancel an authorization
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param v             v of the signature
     * @param r             r of the signature
     * @param s             s of the signature
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _cancelAuthorization(authorizer, nonce, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Attempt to cancel an authorization
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _cancelAuthorization(
        address authorizer,
        bytes32 nonce,
        bytes memory signature
    ) internal {
        _requireUnusedAuthorization(authorizer, nonce);
        _requireValidSignature(
            authorizer,
            keccak256(
                abi.encode(CANCEL_AUTHORIZATION_TYPEHASH, authorizer, nonce)
            ),
            signature
        );
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationCanceled(authorizer, nonce);
    }
    /**
     * @notice Validates that signature against input data struct
     * @param signer        Signer's address
     * @param dataHash      Hash of encoded data struct
     * @param signature     Signature byte array produced by an EOA wallet or a contract wallet
     */
    function _requireValidSignature(
        address signer,
        bytes32 dataHash,
        bytes memory signature
    ) private view {
        require(
            SignatureChecker.isValidSignatureNow(
                signer,
                MessageHashUtils.toTypedDataHash(_domainSeparator(), dataHash),
                signature
            ),
            "FiatTokenV2: invalid signature"
        );
    }
    /**
     * @notice Check that an authorization is unused
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _requireUnusedAuthorization(address authorizer, bytes32 nonce)
        private
        view
    {
        require(
            !_authorizationStates[authorizer][nonce],
            "FiatTokenV2: authorization is used or canceled"
        );
    }
    /**
     * @notice Check that authorization is valid
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     * @param validAfter    The time after which this is valid (unix time)
     * @param validBefore   The time before which this is valid (unix time)
     */
    function _requireValidAuthorization(
        address authorizer,
        bytes32 nonce,
        uint256 validAfter,
        uint256 validBefore
    ) private view {
        require(
            now > validAfter,
            "FiatTokenV2: authorization is not yet valid"
        );
        require(now < validBefore, "FiatTokenV2: authorization is expired");
        _requireUnusedAuthorization(authorizer, nonce);
    }
    /**
     * @notice Mark an authorization as used
     * @param authorizer    Authorizer's address
     * @param nonce         Nonce of the authorization
     */
    function _markAuthorizationAsUsed(address authorizer, bytes32 nonce)
        private
    {
        _authorizationStates[authorizer][nonce] = true;
        emit AuthorizationUsed(authorizer, nonce);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV2 } from "./AbstractFiatTokenV2.sol";
import { EIP712Domain } from "./EIP712Domain.sol";
import { MessageHashUtils } from "../util/MessageHashUtils.sol";
import { SignatureChecker } from "../util/SignatureChecker.sol";
/**
 * @title EIP-2612
 * @notice Provide internal implementation for gas-abstracted approvals
 */
abstract contract EIP2612 is AbstractFiatTokenV2, EIP712Domain {
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)")
    bytes32
        public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint256) private _permitNonces;
    /**
     * @notice Nonces for permit
     * @param owner Token owner's address (Authorizer)
     * @return Next nonce
     */
    function nonces(address owner) external view returns (uint256) {
        return _permitNonces[owner];
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @param owner     Token owner's address (Authorizer)
     * @param spender   Spender's address
     * @param value     Amount of allowance
     * @param deadline  The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        _permit(owner, spender, value, deadline, abi.encodePacked(r, s, v));
    }
    /**
     * @notice Verify a signed approval permit and execute if valid
     * @dev EOA wallet signatures should be packed in the order of r, s, v.
     * @param owner      Token owner's address (Authorizer)
     * @param spender    Spender's address
     * @param value      Amount of allowance
     * @param deadline   The time at which the signature expires (unix time), or max uint256 value to signal no expiration
     * @param signature  Signature byte array signed by an EOA wallet or a contract wallet
     */
    function _permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        bytes memory signature
    ) internal {
        require(
            deadline == type(uint256).max || deadline >= now,
            "FiatTokenV2: permit is expired"
        );
        bytes32 typedDataHash = MessageHashUtils.toTypedDataHash(
            _domainSeparator(),
            keccak256(
                abi.encode(
                    PERMIT_TYPEHASH,
                    owner,
                    spender,
                    value,
                    _permitNonces[owner]++,
                    deadline
                )
            )
        );
        require(
            SignatureChecker.isValidSignatureNow(
                owner,
                typedDataHash,
                signature
            ),
            "EIP2612: invalid signature"
        );
        _approve(owner, spender, value);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { AbstractFiatTokenV1 } from "../v1/AbstractFiatTokenV1.sol";
abstract contract AbstractFiatTokenV2 is AbstractFiatTokenV1 {
    function _increaseAllowance(
        address owner,
        address spender,
        uint256 increment
    ) internal virtual;
    function _decreaseAllowance(
        address owner,
        address spender,
        uint256 decrement
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2016 Smart Contract Solutions, Inc.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @notice Base contract which allows children to implement an emergency stop
 * mechanism
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/feb665136c0dae9912e08397c1a21c4af3651ef3/contracts/lifecycle/Pausable.sol
 * Modifications:
 * 1. Added pauser role, switched pause/unpause to be onlyPauser (6/14/2018)
 * 2. Removed whenNotPause/whenPaused from pause/unpause (6/14/2018)
 * 3. Removed whenPaused (6/14/2018)
 * 4. Switches ownable library to use ZeppelinOS (7/12/18)
 * 5. Remove constructor (7/13/18)
 * 6. Reformat, conform to Solidity 0.6 syntax and add error messages (5/13/20)
 * 7. Make public functions external (5/27/20)
 */
contract Pausable is Ownable {
    event Pause();
    event Unpause();
    event PauserChanged(address indexed newAddress);
    address public pauser;
    bool public paused = false;
    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     */
    modifier whenNotPaused() {
        require(!paused, "Pausable: paused");
        _;
    }
    /**
     * @dev throws if called by any account other than the pauser
     */
    modifier onlyPauser() {
        require(msg.sender == pauser, "Pausable: caller is not the pauser");
        _;
    }
    /**
     * @dev called by the owner to pause, triggers stopped state
     */
    function pause() external onlyPauser {
        paused = true;
        emit Pause();
    }
    /**
     * @dev called by the owner to unpause, returns to normal state
     */
    function unpause() external onlyPauser {
        paused = false;
        emit Unpause();
    }
    /**
     * @notice Updates the pauser address.
     * @param _newPauser The address of the new pauser.
     */
    function updatePauser(address _newPauser) external onlyOwner {
        require(
            _newPauser != address(0),
            "Pausable: new pauser is the zero address"
        );
        pauser = _newPauser;
        emit PauserChanged(pauser);
    }
}
/**
 * SPDX-License-Identifier: MIT
 *
 * Copyright (c) 2018 zOS Global Limited.
 * Copyright (c) 2018-2020 CENTRE SECZ
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
pragma solidity 0.6.12;
/**
 * @notice The Ownable contract has an owner address, and provides basic
 * authorization control functions
 * @dev Forked from https://github.com/OpenZeppelin/openzeppelin-labs/blob/3887ab77b8adafba4a26ace002f3a684c1a3388b/upgradeability_ownership/contracts/ownership/Ownable.sol
 * Modifications:
 * 1. Consolidate OwnableStorage into this contract (7/13/18)
 * 2. Reformat, conform to Solidity 0.6 syntax, and add error messages (5/13/20)
 * 3. Make public functions external (5/27/20)
 */
contract Ownable {
    // Owner of the contract
    address private _owner;
    /**
     * @dev Event to show ownership has been transferred
     * @param previousOwner representing the address of the previous owner
     * @param newOwner representing the address of the new owner
     */
    event OwnershipTransferred(address previousOwner, address newOwner);
    /**
     * @dev The constructor sets the original owner of the contract to the sender account.
     */
    constructor() public {
        setOwner(msg.sender);
    }
    /**
     * @dev Tells the address of the owner
     * @return the address of the owner
     */
    function owner() external view returns (address) {
        return _owner;
    }
    /**
     * @dev Sets a new owner address
     */
    function setOwner(address newOwner) internal {
        _owner = newOwner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(msg.sender == _owner, "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) external onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        setOwner(newOwner);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { SafeMath } from "@openzeppelin/contracts/math/SafeMath.sol";
import { AbstractFiatTokenV1 } from "./AbstractFiatTokenV1.sol";
import { Ownable } from "./Ownable.sol";
import { Pausable } from "./Pausable.sol";
import { Blacklistable } from "./Blacklistable.sol";
/**
 * @title FiatToken
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1 is AbstractFiatTokenV1, Ownable, Pausable, Blacklistable {
    using SafeMath for uint256;
    string public name;
    string public symbol;
    uint8 public decimals;
    string public currency;
    address public masterMinter;
    bool internal initialized;
    /// @dev A mapping that stores the balance and blacklist states for a given address.
    /// The first bit defines whether the address is blacklisted (1 if blacklisted, 0 otherwise).
    /// The last 255 bits define the balance for the address.
    mapping(address => uint256) internal balanceAndBlacklistStates;
    mapping(address => mapping(address => uint256)) internal allowed;
    uint256 internal totalSupply_ = 0;
    mapping(address => bool) internal minters;
    mapping(address => uint256) internal minterAllowed;
    event Mint(address indexed minter, address indexed to, uint256 amount);
    event Burn(address indexed burner, uint256 amount);
    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);
    event MinterRemoved(address indexed oldMinter);
    event MasterMinterChanged(address indexed newMasterMinter);
    /**
     * @notice Initializes the fiat token contract.
     * @param tokenName       The name of the fiat token.
     * @param tokenSymbol     The symbol of the fiat token.
     * @param tokenCurrency   The fiat currency that the token represents.
     * @param tokenDecimals   The number of decimals that the token uses.
     * @param newMasterMinter The masterMinter address for the fiat token.
     * @param newPauser       The pauser address for the fiat token.
     * @param newBlacklister  The blacklister address for the fiat token.
     * @param newOwner        The owner of the fiat token.
     */
    function initialize(
        string memory tokenName,
        string memory tokenSymbol,
        string memory tokenCurrency,
        uint8 tokenDecimals,
        address newMasterMinter,
        address newPauser,
        address newBlacklister,
        address newOwner
    ) public {
        require(!initialized, "FiatToken: contract is already initialized");
        require(
            newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        require(
            newPauser != address(0),
            "FiatToken: new pauser is the zero address"
        );
        require(
            newBlacklister != address(0),
            "FiatToken: new blacklister is the zero address"
        );
        require(
            newOwner != address(0),
            "FiatToken: new owner is the zero address"
        );
        name = tokenName;
        symbol = tokenSymbol;
        currency = tokenCurrency;
        decimals = tokenDecimals;
        masterMinter = newMasterMinter;
        pauser = newPauser;
        blacklister = newBlacklister;
        setOwner(newOwner);
        initialized = true;
    }
    /**
     * @dev Throws if called by any account other than a minter.
     */
    modifier onlyMinters() {
        require(minters[msg.sender], "FiatToken: caller is not a minter");
        _;
    }
    /**
     * @notice Mints fiat tokens to an address.
     * @param _to The address that will receive the minted tokens.
     * @param _amount The amount of tokens to mint. Must be less than or equal
     * to the minterAllowance of the caller.
     * @return True if the operation was successful.
     */
    function mint(address _to, uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
        notBlacklisted(_to)
        returns (bool)
    {
        require(_to != address(0), "FiatToken: mint to the zero address");
        require(_amount > 0, "FiatToken: mint amount not greater than 0");
        uint256 mintingAllowedAmount = minterAllowed[msg.sender];
        require(
            _amount <= mintingAllowedAmount,
            "FiatToken: mint amount exceeds minterAllowance"
        );
        totalSupply_ = totalSupply_.add(_amount);
        _setBalance(_to, _balanceOf(_to).add(_amount));
        minterAllowed[msg.sender] = mintingAllowedAmount.sub(_amount);
        emit Mint(msg.sender, _to, _amount);
        emit Transfer(address(0), _to, _amount);
        return true;
    }
    /**
     * @dev Throws if called by any account other than the masterMinter
     */
    modifier onlyMasterMinter() {
        require(
            msg.sender == masterMinter,
            "FiatToken: caller is not the masterMinter"
        );
        _;
    }
    /**
     * @notice Gets the minter allowance for an account.
     * @param minter The address to check.
     * @return The remaining minter allowance for the account.
     */
    function minterAllowance(address minter) external view returns (uint256) {
        return minterAllowed[minter];
    }
    /**
     * @notice Checks if an account is a minter.
     * @param account The address to check.
     * @return True if the account is a minter, false if the account is not a minter.
     */
    function isMinter(address account) external view returns (bool) {
        return minters[account];
    }
    /**
     * @notice Gets the remaining amount of fiat tokens a spender is allowed to transfer on
     * behalf of the token owner.
     * @param owner   The token owner's address.
     * @param spender The spender's address.
     * @return The remaining allowance.
     */
    function allowance(address owner, address spender)
        external
        override
        view
        returns (uint256)
    {
        return allowed[owner][spender];
    }
    /**
     * @notice Gets the totalSupply of the fiat token.
     * @return The totalSupply of the fiat token.
     */
    function totalSupply() external override view returns (uint256) {
        return totalSupply_;
    }
    /**
     * @notice Gets the fiat token balance of an account.
     * @param account  The address to check.
     * @return balance The fiat token balance of the account.
     */
    function balanceOf(address account)
        external
        override
        view
        returns (uint256)
    {
        return _balanceOf(account);
    }
    /**
     * @notice Sets a fiat token allowance for a spender to spend on behalf of the caller.
     * @param spender The spender's address.
     * @param value   The allowance amount.
     * @return True if the operation was successful.
     */
    function approve(address spender, uint256 value)
        external
        virtual
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(spender)
        returns (bool)
    {
        _approve(msg.sender, spender, value);
        return true;
    }
    /**
     * @dev Internal function to set allowance.
     * @param owner     Token owner's address.
     * @param spender   Spender's address.
     * @param value     Allowance amount.
     */
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal override {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");
        allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }
    /**
     * @notice Transfers tokens from an address to another by spending the caller's allowance.
     * @dev The caller must have some fiat token allowance on the payer's tokens.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(from)
        notBlacklisted(to)
        returns (bool)
    {
        require(
            value <= allowed[from][msg.sender],
            "ERC20: transfer amount exceeds allowance"
        );
        _transfer(from, to, value);
        allowed[from][msg.sender] = allowed[from][msg.sender].sub(value);
        return true;
    }
    /**
     * @notice Transfers tokens from the caller.
     * @param to    Payee's address.
     * @param value Transfer amount.
     * @return True if the operation was successful.
     */
    function transfer(address to, uint256 value)
        external
        override
        whenNotPaused
        notBlacklisted(msg.sender)
        notBlacklisted(to)
        returns (bool)
    {
        _transfer(msg.sender, to, value);
        return true;
    }
    /**
     * @dev Internal function to process transfers.
     * @param from  Payer's address.
     * @param to    Payee's address.
     * @param value Transfer amount.
     */
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal override {
        require(from != address(0), "ERC20: transfer from the zero address");
        require(to != address(0), "ERC20: transfer to the zero address");
        require(
            value <= _balanceOf(from),
            "ERC20: transfer amount exceeds balance"
        );
        _setBalance(from, _balanceOf(from).sub(value));
        _setBalance(to, _balanceOf(to).add(value));
        emit Transfer(from, to, value);
    }
    /**
     * @notice Adds or updates a new minter with a mint allowance.
     * @param minter The address of the minter.
     * @param minterAllowedAmount The minting amount allowed for the minter.
     * @return True if the operation was successful.
     */
    function configureMinter(address minter, uint256 minterAllowedAmount)
        external
        whenNotPaused
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = true;
        minterAllowed[minter] = minterAllowedAmount;
        emit MinterConfigured(minter, minterAllowedAmount);
        return true;
    }
    /**
     * @notice Removes a minter.
     * @param minter The address of the minter to remove.
     * @return True if the operation was successful.
     */
    function removeMinter(address minter)
        external
        onlyMasterMinter
        returns (bool)
    {
        minters[minter] = false;
        minterAllowed[minter] = 0;
        emit MinterRemoved(minter);
        return true;
    }
    /**
     * @notice Allows a minter to burn some of its own tokens.
     * @dev The caller must be a minter, must not be blacklisted, and the amount to burn
     * should be less than or equal to the account's balance.
     * @param _amount the amount of tokens to be burned.
     */
    function burn(uint256 _amount)
        external
        whenNotPaused
        onlyMinters
        notBlacklisted(msg.sender)
    {
        uint256 balance = _balanceOf(msg.sender);
        require(_amount > 0, "FiatToken: burn amount not greater than 0");
        require(balance >= _amount, "FiatToken: burn amount exceeds balance");
        totalSupply_ = totalSupply_.sub(_amount);
        _setBalance(msg.sender, balance.sub(_amount));
        emit Burn(msg.sender, _amount);
        emit Transfer(msg.sender, address(0), _amount);
    }
    /**
     * @notice Updates the master minter address.
     * @param _newMasterMinter The address of the new master minter.
     */
    function updateMasterMinter(address _newMasterMinter) external onlyOwner {
        require(
            _newMasterMinter != address(0),
            "FiatToken: new masterMinter is the zero address"
        );
        masterMinter = _newMasterMinter;
        emit MasterMinterChanged(masterMinter);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _blacklist(address _account) internal override {
        _setBlacklistState(_account, true);
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _unBlacklist(address _account) internal override {
        _setBlacklistState(_account, false);
    }
    /**
     * @dev Helper method that sets the blacklist state of an account.
     * @param _account         The address of the account.
     * @param _shouldBlacklist True if the account should be blacklisted, false if the account should be unblacklisted.
     */
    function _setBlacklistState(address _account, bool _shouldBlacklist)
        internal
        virtual
    {
        _deprecatedBlacklisted[_account] = _shouldBlacklist;
    }
    /**
     * @dev Helper method that sets the balance of an account.
     * @param _account The address of the account.
     * @param _balance The new fiat token balance of the account.
     */
    function _setBalance(address _account, uint256 _balance) internal virtual {
        balanceAndBlacklistStates[_account] = _balance;
    }
    /**
     * @inheritdoc Blacklistable
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        override
        view
        returns (bool)
    {
        return _deprecatedBlacklisted[_account];
    }
    /**
     * @dev Helper method to obtain the balance of an account.
     * @param _account  The address of the account.
     * @return          The fiat token balance of the account.
     */
    function _balanceOf(address _account)
        internal
        virtual
        view
        returns (uint256)
    {
        return balanceAndBlacklistStates[_account];
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "./Ownable.sol";
/**
 * @title Blacklistable Token
 * @dev Allows accounts to be blacklisted by a "blacklister" role
 */
abstract contract Blacklistable is Ownable {
    address public blacklister;
    mapping(address => bool) internal _deprecatedBlacklisted;
    event Blacklisted(address indexed _account);
    event UnBlacklisted(address indexed _account);
    event BlacklisterChanged(address indexed newBlacklister);
    /**
     * @dev Throws if called by any account other than the blacklister.
     */
    modifier onlyBlacklister() {
        require(
            msg.sender == blacklister,
            "Blacklistable: caller is not the blacklister"
        );
        _;
    }
    /**
     * @dev Throws if argument account is blacklisted.
     * @param _account The address to check.
     */
    modifier notBlacklisted(address _account) {
        require(
            !_isBlacklisted(_account),
            "Blacklistable: account is blacklisted"
        );
        _;
    }
    /**
     * @notice Checks if account is blacklisted.
     * @param _account The address to check.
     * @return True if the account is blacklisted, false if the account is not blacklisted.
     */
    function isBlacklisted(address _account) external view returns (bool) {
        return _isBlacklisted(_account);
    }
    /**
     * @notice Adds account to blacklist.
     * @param _account The address to blacklist.
     */
    function blacklist(address _account) external onlyBlacklister {
        _blacklist(_account);
        emit Blacklisted(_account);
    }
    /**
     * @notice Removes account from blacklist.
     * @param _account The address to remove from the blacklist.
     */
    function unBlacklist(address _account) external onlyBlacklister {
        _unBlacklist(_account);
        emit UnBlacklisted(_account);
    }
    /**
     * @notice Updates the blacklister address.
     * @param _newBlacklister The address of the new blacklister.
     */
    function updateBlacklister(address _newBlacklister) external onlyOwner {
        require(
            _newBlacklister != address(0),
            "Blacklistable: new blacklister is the zero address"
        );
        blacklister = _newBlacklister;
        emit BlacklisterChanged(blacklister);
    }
    /**
     * @dev Checks if account is blacklisted.
     * @param _account The address to check.
     * @return true if the account is blacklisted, false otherwise.
     */
    function _isBlacklisted(address _account)
        internal
        virtual
        view
        returns (bool);
    /**
     * @dev Helper method that blacklists an account.
     * @param _account The address to blacklist.
     */
    function _blacklist(address _account) internal virtual;
    /**
     * @dev Helper method that unblacklists an account.
     * @param _account The address to unblacklist.
     */
    function _unBlacklist(address _account) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract AbstractFiatTokenV1 is IERC20 {
    function _approve(
        address owner,
        address spender,
        uint256 value
    ) internal virtual;
    function _transfer(
        address from,
        address to,
        uint256 value
    ) internal virtual;
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { Ownable } from "../v1/Ownable.sol";
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { SafeERC20 } from "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
contract Rescuable is Ownable {
    using SafeERC20 for IERC20;
    address private _rescuer;
    event RescuerChanged(address indexed newRescuer);
    /**
     * @notice Returns current rescuer
     * @return Rescuer's address
     */
    function rescuer() external view returns (address) {
        return _rescuer;
    }
    /**
     * @notice Revert if called by any account other than the rescuer.
     */
    modifier onlyRescuer() {
        require(msg.sender == _rescuer, "Rescuable: caller is not the rescuer");
        _;
    }
    /**
     * @notice Rescue ERC20 tokens locked up in this contract.
     * @param tokenContract ERC20 token contract address
     * @param to        Recipient address
     * @param amount    Amount to withdraw
     */
    function rescueERC20(
        IERC20 tokenContract,
        address to,
        uint256 amount
    ) external onlyRescuer {
        tokenContract.safeTransfer(to, amount);
    }
    /**
     * @notice Updates the rescuer address.
     * @param newRescuer The address of the new rescuer.
     */
    function updateRescuer(address newRescuer) external onlyOwner {
        require(
            newRescuer != address(0),
            "Rescuable: new rescuer is the zero address"
        );
        _rescuer = newRescuer;
        emit RescuerChanged(newRescuer);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { FiatTokenV1 } from "../v1/FiatTokenV1.sol";
import { Rescuable } from "./Rescuable.sol";
/**
 * @title FiatTokenV1_1
 * @dev ERC20 Token backed by fiat reserves
 */
contract FiatTokenV1_1 is FiatTokenV1, Rescuable {
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
import { ECRecover } from "./ECRecover.sol";
import { IERC1271 } from "../interface/IERC1271.sol";
/**
 * @dev Signature verification helper that can be used instead of `ECRecover.recover` to seamlessly support both ECDSA
 * signatures from externally owned accounts (EOAs) as well as ERC1271 signatures from smart contract wallets.
 *
 * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/SignatureChecker.sol
 */
library SignatureChecker {
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. If the signer is a smart contract, the
     * signature is validated against that smart contract using ERC1271, otherwise it's validated using `ECRecover.recover`.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     */
    function isValidSignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) external view returns (bool) {
        if (!isContract(signer)) {
            return ECRecover.recover(digest, signature) == signer;
        }
        return isValidERC1271SignatureNow(signer, digest, signature);
    }
    /**
     * @dev Checks if a signature is valid for a given signer and data hash. The signature is validated
     * against the signer smart contract using ERC1271.
     * @param signer        Address of the claimed signer
     * @param digest        Keccak-256 hash digest of the signed message
     * @param signature     Signature byte array associated with hash
     *
     * NOTE: Unlike ECDSA signatures, contract signatures are revocable, and the outcome of this function can thus
     * change through time. It could return true at block N and false at block N+1 (or the opposite).
     */
    function isValidERC1271SignatureNow(
        address signer,
        bytes32 digest,
        bytes memory signature
    ) internal view returns (bool) {
        (bool success, bytes memory result) = signer.staticcall(
            abi.encodeWithSelector(
                IERC1271.isValidSignature.selector,
                digest,
                signature
            )
        );
        return (success &&
            result.length >= 32 &&
            abi.decode(result, (bytes32)) ==
            bytes32(IERC1271.isValidSignature.selector));
    }
    /**
     * @dev Checks if the input address is a smart contract.
     */
    function isContract(address addr) internal view returns (bool) {
        uint256 size;
        assembly {
            size := extcodesize(addr)
        }
        return size > 0;
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Signature message hash utilities for producing digests to be consumed by {ECDSA} recovery or signing.
 *
 * The library provides methods for generating a hash of a message that conforms to the
 * https://eips.ethereum.org/EIPS/eip-191[EIP 191] and https://eips.ethereum.org/EIPS/eip-712[EIP 712]
 * specifications.
 */
library MessageHashUtils {
    /**
     * @dev Returns the keccak256 digest of an EIP-712 typed data (EIP-191 version `0x01`).
     * Adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/21bb89ef5bfc789b9333eb05e3ba2b7b284ac77c/contracts/utils/cryptography/MessageHashUtils.sol
     *
     * The digest is calculated from a `domainSeparator` and a `structHash`, by prefixing them with
     * `\\x19\\x01` and hashing the result. It corresponds to the hash signed by the
     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`] JSON-RPC method as part of EIP-712.
     *
     * @param domainSeparator    Domain separator
     * @param structHash         Hashed EIP-712 data struct
     * @return digest            The keccak256 digest of an EIP-712 typed data
     */
    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash)
        internal
        pure
        returns (bytes32 digest)
    {
        assembly {
            let ptr := mload(0x40)
            mstore(ptr, "\\x19\\x01")
            mstore(add(ptr, 0x02), domainSeparator)
            mstore(add(ptr, 0x22), structHash)
            digest := keccak256(ptr, 0x42)
        }
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title EIP712
 * @notice A library that provides EIP712 helper functions
 */
library EIP712 {
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @param chainId   Blockchain ID
     * @return Domain separator
     */
    function makeDomainSeparator(
        string memory name,
        string memory version,
        uint256 chainId
    ) internal view returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    // keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)")
                    0x8b73c3c69bb8fe3d512ecc4cf759cc79239f7b179b0ffacaa9a75d522b39400f,
                    keccak256(bytes(name)),
                    keccak256(bytes(version)),
                    chainId,
                    address(this)
                )
            );
    }
    /**
     * @notice Make EIP712 domain separator
     * @param name      Contract name
     * @param version   Contract version
     * @return Domain separator
     */
    function makeDomainSeparator(string memory name, string memory version)
        internal
        view
        returns (bytes32)
    {
        uint256 chainId;
        assembly {
            chainId := chainid()
        }
        return makeDomainSeparator(name, version, chainId);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @title ECRecover
 * @notice A library that provides a safe ECDSA recovery function
 */
library ECRecover {
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/65e4ffde586ec89af3b7e9140bdc9235d1254853/contracts/cryptography/ECDSA.sol
     * Modifications: Accept v, r, and s as separate arguments
     * @param digest    Keccak-256 hash digest of the signed message
     * @param v         v of the signature
     * @param r         r of the signature
     * @param s         s of the signature
     * @return Signer address
     */
    function recover(
        bytes32 digest,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal pure returns (address) {
        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
        // the valid range for s in (281): 0 < s < secp256k1n ÷ 2 + 1, and for v in (282): v ∈ {27, 28}. Most
        // signatures from current libraries generate a unique signature with an s-value in the lower half order.
        //
        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
        // these malleable signatures as well.
        if (
            uint256(s) >
            0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0
        ) {
            revert("ECRecover: invalid signature 's' value");
        }
        if (v != 27 && v != 28) {
            revert("ECRecover: invalid signature 'v' value");
        }
        // If the signature is valid (and not malleable), return the signer address
        address signer = ecrecover(digest, v, r, s);
        require(signer != address(0), "ECRecover: invalid signature");
        return signer;
    }
    /**
     * @notice Recover signer's address from a signed message
     * @dev Adapted from: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/0053ee040a7ff1dbc39691c9e67a69f564930a88/contracts/utils/cryptography/ECDSA.sol
     * @param digest    Keccak-256 hash digest of the signed message
     * @param signature Signature byte array associated with hash
     * @return Signer address
     */
    function recover(bytes32 digest, bytes memory signature)
        internal
        pure
        returns (address)
    {
        require(signature.length == 65, "ECRecover: invalid signature length");
        bytes32 r;
        bytes32 s;
        uint8 v;
        // ecrecover takes the signature parameters, and the only way to get them
        // currently is to use assembly.
        /// @solidity memory-safe-assembly
        assembly {
            r := mload(add(signature, 0x20))
            s := mload(add(signature, 0x40))
            v := byte(0, mload(add(signature, 0x60)))
        }
        return recover(digest, v, r, s);
    }
}
/**
 * SPDX-License-Identifier: Apache-2.0
 *
 * Copyright (c) 2023, Circle Internet Financial, LLC.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
pragma solidity 0.6.12;
/**
 * @dev Interface of the ERC1271 standard signature validation method for
 * contracts as defined in https://eips.ethereum.org/EIPS/eip-1271[ERC-1271].
 */
interface IERC1271 {
    /**
     * @dev Should return whether the signature provided is valid for the provided data
     * @param hash          Hash of the data to be signed
     * @param signature     Signature byte array associated with the provided data hash
     * @return magicValue   bytes4 magic value 0x1626ba7e when function passes
     */
    function isValidSignature(bytes32 hash, bytes memory signature)
        external
        view
        returns (bytes4 magicValue);
}